Make yourself with your own trees for children. Create a simple and amazing decor of wood with your own hands. Nuances of the manufacture of children's furniture made of wood

From the old tree you can make a garden track, steps, dacha furniture, woodcut. See how to use unnecessary boards, for gardening inventory.

Many familiar with this picture, when you go to the country shed, the shovel does not strive to fall, and the rake, if you come on them, hit the head. Sometimes it is so difficult to find the necessary tool, so the organizer must be done for the country's inventory. Here is another problem regarding where to go old wood, or rather, the boards will be resolved.

Organizer for Garden Inventory from PVC Pipe Criming

Convenient when each garden tool is in its place. In addition, it is good when the organizer looks beautiful for him, but is made of the remains of the old material.

If you have done the water supply for the cottage, probication of PVC pipes remained. They will be useful for the next idea. For such an organizer, take:

narrow thick powder;
self-tapping screw;
pVC pipes or their trimming;
hacksaw;
screwdriver;
level;
saw for wood.

Pipes need to spill at an angle, of these it will be more convenient to get a tool.

To sprink PVC use the hacksaw, a permeable saw, plastic pipe cutter or a special cutter.

Make marking by helping themselves level, draw on the wall on which the boards three horizontal lines will be fixed. Measure the length of the boards, disconse them. With the help of self-sufficiency, attach two to the wall. Lower needed for support so that the garden equipment does not touch the earth. Brepping it with a small bar.

On other boards, make marking at the same distance. Attach PVC pipes up.

If you have a wall in Saraj straight, then look at what other crafts for giving are designed to keep the hand-made garden tool in them.

For such an organizer, you will need:

pVC pipes;
double-sided assembly tape;
hacksaw;
scissors;
roulette;
pencil;
soft rag.

Disposable PVC pipes to the paint side, so that the bigger side has a height of 12-15, and the smaller 7-10 cm. If the pipes are not clean, pre-wash and dry them. If you dreamed, wipe the soft dry cloth. Clean the wall, and if you need, degrease the surface.

With the help of roulette and pencil, apply markup on the wall. Cut fragments of the mounting tape of the desired length. After removing the protective layer on one side, attach it to PVC, then remove the second protective layer to attach to the wall.

In order for the ribbon more stronger, avoid hitting it when mounting dust, dirt, do not touch the sticky surface with your hands.

After you recorded the segments of PVC on the wall, remove the gardening inventory in the section for convenient storage.

Attach the colored woodcarce with a lacquer to the wall, trimming PVC pipes. Thus, you solve the problem of storing extension cords. And the brushes can be sprinkled on the nails featured to another wooden board.

If you have pallets in the country, they can also be accommodated for storing garden inventory, attaching those to the wall.

Boards and small glass jars turn into a system for storing nails, screws and other small metal objects that are needed in the country.

To implement this interesting idea, take:

a small one;
nail;
a hammer;
self-tapping screw;
screwdriver;
little jars with screwy lids.

Manufacturing instructions:

First you need to do holes in the lids. To do this, turn them over, putting on a one. Make three holes at the same distance with a nail and hammer.
Attach the lid below to the wooden shelf, attach the screws.
Place in the jar of all trifle for needlework at the cottage. You will remain fastening it to the lid.

Such transparent containers are convenient, you can always see where it is needed at the moment. By the way, for this you can use plastic bottles. They cut holes that need to be treated with burner. It must be done necessarily, because the edges of plastic bottles can trim the hand.

Organizer for shoes from the old tree

Another problem faced in the country concerns shoes. It does not always have enough space to place rubber boots, slates, slippers of all households. Interesting ideas will help this.

If you have an old hanger with hooks, do not throw out this thing. It is enough to paint it, nourish in the desired height, after which the problem of storing shoes will be solved.

In the presence of wooden pallets, it can be done like this: to cut it into several parts so that there is a transverse bar. The bottom of such sections do not need. It is enough to cover the shelves with a varnish for wood, place the shoes in them. Teenage and adult will well hold on.

If desired and wooden boxes in which fruits and vegetables are stored, will turn into original crafts for giving, for example, an organizer for shoes.

To create it, take:

wooden boxes;
impregnation for wood;
self-tapping screw;
sowings.

In each box you will need to make a shelf in the middle. To do this, use the homes that have in the country or disassemble some wooden boxes so that you have the details for sticks. They are fixed with one and on the other hand, screwing up self-pressing to small shelter.

On small sidewalls, find the middle, attach a lump here on which the shelf is holding. Now the sections are connectible with each other as shown in the photo. That is, first, they are fixed in pairs, then rows, slightly shifting those in one, then in the other direction.

But what other interesting ideas can be implemented using such boxes.

For the first, you first need to paint them when dried, arrange vertically and horizontally. For the second, it is not even necessary to spend on the paint. These elements are connected to each other using large paper clips.

There are many pairs of shoes on such a staircase. You only need to nail the horizontally bakery to the steps. If you wish, you can fill the angular space if you attach rectangular shelves here here.

Beautifully folded firewood at the cottage

Easy to clean up not only in the barn, in the country house, but also on the street. Such woodnings will not only be a place for firewood, but also add a spat. Fracture is good to clean the oven. Make a knitting, put in woodcut. For its manufacture, you will need so little:

boards;
self-tapping screw;
true paint.

Such a building is easy. The basis is the four vertical pillar, which can be made from narrow wide widespread or bars. They are fasten with horizontal horses, which are at the same time the lower shelf. In the center, make another one. Roof is double. Do not forget to cover all elements by antiseptic impregnation.

If you have an old rack, it can also be placed folded firewood. But it is first necessary to paint that antiseptic so that the wooden elements will be served as long as possible. Put the woodcut near the wall, then it will take a little space, and atmospheric precipitation will not come here.

The following fusers will decorate the old fence, if you place them ahead of it.

For one such structure you will need:

four bars with a cross section of 50 or 40 cm;
nails;
self-tapping screw;
singness of the same width;
metal bitch;
impregnation for wood;
saw;
roulette.

Manufacturing instructions:

Fly bars pairs in the form of the letter L, attaching to the transverse bar.
Measure the distance between two racks, set the boards of such a length. Surround them, starting below. At the same time, each top should go a little on the lower.
Bottom, see the horizontally two bars, attach the boards on which there will be beautifully folded firewood. Attach the horse.

Unnecessary pallets can be used to streamline firewood. It is necessary to nourish three vertical boards to one with two sides, one to attach horizontally so that it connects these two elements.

If you want to decorate the woodcut, then under the upper "leg" pallets come up to the board. Put the film in the resulting drawer, pour the land, put flowers or greens.

A place for beautifully folded firewood can simultaneously become a bench for recreation, see how easy it is to do so. This idea will also tell me how to save space.

Place the firewood near the street focus, under the bench. When it is dry weather, put decorative pillows on it, on which it is so convenient to sit.

Saw birch firewood can be issued original. Put the thick and thin branches of this tree in the center, around - fragments of the trunks, fix everything with a cable rope. A pair of pots with flowers, the lantern will complete the natural picture.

Where to do an old tree?

If you got a plot on which several trees grow or, perhaps, there are those that broke the storm. So that you do not spend money on the removal of this natural material, see how many interesting things can be done from it.

For the device such a garden path you will need:

old tree;
electrical or chainsaw;
antiseptic;
geotextile;
brush;
rubbank;
sand.

Make marking tracks. Put here first a gravel layer with a height of 5 cm, on it - the same sand. On top of the bed geotextile.

Take a high density geotextile so that it will serve as long as possible, and the weed grass could not exist through it.

Separate a tree on a clogs with a thickness of 4-5 cm. Cover them with an antiseptic from all sides. If you want to give these glitter elements, then after drying the last layer of impregnation, paint a lacquer for wood intended for external work.

Put the wide chocks first on the marked and prepared platform, located between them, are smaller. You can help yourself with wooden or rubber Cyans, tapping on the billets for better fit to the surface.

If you have few such elements, place them stretch or pour into the soil the crossbank layer, and open the wooden chocks on top in the form of a pattern.

screwdriver;

boards.

Place two halves of a thick log at some distance from each other. Draw where the slots will be for the board, on which they are sitting. Drink these holes, remove the flesh to the tree. Insert the board here, attach it with corners and self-drawing.

By the same technology, secure the second board at the top so that when the seat could be relying on her back.

If you own the work of electrical or chainsaw, then you can make such a street chair.

If you are looking for simpler ideas where you can do an old tree, then pay attention to these.

Churbachki need to be treated with a lacquer for wood, they will become kashpo or other interior decor objects.

The old tree, its branches can turn into such a stylish mirror, for this you will need:

plywood;
paint;
primer;
wood;
lobzik;
round mirror;
liquid Nails;
glue for wood.

Attach the mirror to the plywood, outline it. Return from this mark from all sides of 10 cm, outlines this outdoor circle, cut down on this markup.

Apply the primer when it dries, paint this place. Stick to the center of the mirror, "putting" it on liquid nails. Apply glue on wooden circles, secure them on the frame. You can pre-cover them with varnish for wood, then glued to plywood.

That's how much useful can be made from wood, PVC pipe residues. If you are interested in ideas related to how the organizer is for shoes can be made, see the following video.

The second plot will teach the shop from the log without a single nail.

Nothing can decorate the dwelling better than crafts that will be performed by the use of natural origin. Only they are able to charge the house with positive emotions and make it truly unique. Create crafts from wood can both a child and an adult.

For the manufacture of beautiful and original crafts, it will not be necessary to master the complex wood carving technique, you just need to make wood selection, buy a suitable tool and highlight a small amount of time to make creative ideas that can be found on the Internet.

Using wood, which has a uniform structure or with a beautiful pattern on a spell, You can build a lot of things. For example, if with the help of a disk saw, cut the lamps into small mugs, after which it is possible to make them polishing, then you can make several coins under the hottest.

To do this, it will be necessary to stick the spike onto the cargo to each other, turn over the product and produce the same sticking on the reverse side. Taking advantage of the beautiful sleeve log, some craftsmen make a clock, consolidating from the reverse side the mechanism that was previously stood on the electronic clock and drilled in the center recess for the arrows. Using the iborus, draw the dial or stick a few sticks from the tree to the places where the numbers should be.

Decorations for home

From the tree you can make a lot of things useful for the house. They are suitable for the apartment, and for giving. And make them quite simple.

Tree crafts add some mysteriousness to the home interior, such examples are hand-made lamps. The originality of the lampshar made of steel wire and wooden slats, makes the atmosphere of comfort and harmony in the room.

In order to make a beautiful product, you will need to cut the planks on the rectangles and drill in each hole, then it will be necessary to simply collect workpieces using a wire by hugging them on it. It is better to make the assembly based on the width of the quadricles, placing in the middle of those wider. Further, the design is flex and fastened with the rest before receiving the globe. For the subject to be more extravagant, two balls should be made, one of which will be somewhat less than the other. Place a smaller globe in more and insert inside the cartridge, screw the light bulb.

Original hanger

Unique crafts from wood bitch with their own hands, you can make it possible to make a little fantasy and smelting. For example, visiting a couple of segments of branches. Keep them by using ordinary nails to the surface of the wall. Install the board on top of the design, to obtain a shelf. If you fasten the branch to it with the presence of bitch, it will turn out a wonderful hanger.

Cutting boards

Do not throw away the remnants of a building wooden material, for example, crafts from boards can be a beautiful decoration of each kitchen. This, of course, is about cutting boards, which are used by every mistress in their kitchen.

This element of the kitchen utensil will become an excellent gift of a friend or relative. Any woman will be glad to get a gift such a product from wood, as it is original and can always come in handy. Cutting board is manufactured as follows.:

The result will be a beautiful board, which in the future you can paint the same pattern on it using the electric heating agent. After applying the pattern, the main side of the board should be covered with varnish.

Crafts throughout the family

It is very useful to attract children to creativity. If you teach the child to make it yourself what come in handy in everyday life, you can show him how important to love and respect the work.

Toys for children

Many people think that can be made of wood. Yes, anything. Even a fun game that, undoubtedly, enthusiasses everyone, because it will be done with their own hands, and the view will have a rather original. It will be fun during the summer pastry in the country area. Create a product is easy:

Cut the branches on the circles whose diameter will be about 1 cm. It will take them 12 pieces.
Taking advantage of sandpaper, handle details.
Prepare a circle from a wide range of logs, on which the cells are smelted, approximately 3 by 3 cm.
On the already prepared 6 circles, burn noliki, on the remaining - crosses.

Such simple actions can be obtained from the original game in which the adults and the kids love to play. Therefore, do not throw away the remains of the wooden material, and use the ideas for creating different crafts.

A vase for flowers

fly the product that even a schoolboy can perform. We are talking about a vase in which you can put a bouquet of living colors. It is performed from the spirits of trees and metal cans. In order to result in such a unique gift, need some actions:

With adults, stocking of small smoke sizes.
Take a jar of metal and make it cleansing from dust and pollution.
Using glue, to accommodate sleeps based on the bottom, while avoiding the formation of the gaps. When making cracks, make their disguise with mugs of smaller diameter.

On this, all the work is considered complete. It is possible to obtain brilliance to cover VAZochka varnish. This handicraft will become a unique gift for mom for birthday or on March 8. Yes, and the bouquet will look original in a vase from a natural tree.

Unique stool

This unique wooden product will be able to just decorate each country house or garden. In order to make it, it will spend a little strength and time, the result will be a unique stool. To create it, you will need:

These types of crafts are distinguished by their uniqueness and originality, while they do not need to create some specific skills of skill. Having felt a little time and manifest a bit of fantasy, you can get a beautiful wood product.

Do not forget that children love to participate in any process very much, so sure to attract them to the creation of new masterpieces, be sure they will be appreciated. You can find crafts with which they will be able to cope on their own, do not interfere with children's development and encourage them in every way fantasy.

If you want to diversify some kind of leisure, then we advise you, dear friends, join the joinery. This exciting occupation will be so tightened to you that time will simply imperceptibly elude, and you will learn how to produce yourself with all sorts of scenery for home, cottages, garden and, of course, the yard. In addition to all this, you will not torment the eternal question, what to give to relatives, friends and colleagues to work on their behalf and other holidays. Moreover, brewed materials for creativity at least a pond of a pride, all the old trees are on your household plot at your disposal. Even from unspoic hemp, yes, it is possible to create incredible masterpieces of art with their own imagination, which will admire everything without exception. So, we strongly recommend visiting our article, which will provide you with 10 photos of the ideas of beautiful and interesting crafts from wood with your own hands for beginners prepared. They will serve for you a bright example and the impetus for our own extraordinarily funny work. Video with step-by-step master classes will complement and enshrine your knowledge gained in the area of \u200b\u200bjoinery.

Original feeder from full

If your child is 11-12 years old in the work lesson, they asked homework in school or in kindergarten, make a feeder for birds, then such a craft from a tree should like it. You will not spend a lot of time on its manufacture, and the result will delight you and surprise others. Let's look at step-by-step instructions and understand how to make an interesting feeder out of your own hands.

You will need:

Log,
Chainsaw,
Electrolovik,
Chisel semicircular
A hammer,
Chain - 1 m,
Carbine,
Mounting loop - 2 pcs.,
Saws.

Progress:

Even a novice carpenter through our master class will be able to build a simple and original feeder from the log. From Polyan, we scream two circles on both sides, a small thickness of the chainsaw.
Cut the wedge in length is full of approximately 45 degrees.
I pull out a wedge out of it.
We make longitudinal and transverse rods inside the linen, do not be angry until the contour is about 5 centimeters.
With the help of the chisels and the hammer we will give the middle of our PLAN. Align the chipsets, making the inner part with a smooth.
Of the 2 dumped circles, cut the side plugs. To do this, we apply the circle to the linen and on the inner contour we plan the size of the plug, and cut out it with a jigsaw.
We insert the plugs around the edges of our feeders and secure self-drawing.
Our snaps in the form of a feeder is ready, now we will make fastening for it.
To do this, we screw the mounting hinges on the sides. They wear a chain.
It remains on the chain to attach the carbine and hang on the tree.

Video: An interesting bird feeder with your own hands

Frame from branches of a tree

Photo is a preserved piece of happiness, captured in different periods of life. Having made your own hands an unusual photo frame from a tree, you will bring the highlight to the interior and surprise your guests. This framework will be especially relevant for a gift to loved ones. Even the novice carpenter can easily and quickly cope with such a simple task. The result is an amazing handicraft to everyone!

You will need:

Sprigs of different thickness,
Frame,
Adhesive gun
Electrolzik.

Progress:

Splits on wheels, about 5 mm thick. The more diverse the thickness of the twigs will be, the more interesting the ready-made frame will look.
Now let's cross the frame with the ones with glue by placing them in chaotic order.
The edges can be uneven, but it will give a special charm to your cradle made of wood made with your own hands.

Swedish candle

Such a candle will be indispensable in any campaign. You can prepare food on it or warm the water, it burns very long. This beneficial handicraft made by personally will save you in any hike, travel, fishing and even in the country. Make it insanely just. Let's see the step-by-step description and the principle of its implementation.

You will need:

A piece of logs
Chainsaw,
Liquid for ignition.

Progress:

In order to make this interesting craft from a tree with their own hands for beginners at home, it will be necessary to make a chainsaw to make the 4th intersecting in the center cut along the log. The cuts do not until the end so that the design does not break down, but a little more than half of the length.
Now in the middle fill the ignition fluid.
When you find yourself in the campaign just burn the log in the center. The flame will be strong.
In order for oxygen to enter the place of ignition, take 2 twigs, preferably, raw and put them in parallel to each other. Now they can be put in dishes with food or water.

Video: Master class for the manufacture of a Swedish candle with their own hands

Owl of wood

To decorate the garden or, as an interesting handicraft to school, it will look good Owl from a tree. She is done with their own hands is quite simple, so with your help even a novice carpenter - a schoolboy can easily cope with such an owl. Before you begin, let's see how to make owls personally in step-by-step instructions.

You will need:

Round sleeves with a tree of different diameters (1 large, 2 small and 1 medium),
Saw,
Self-tapping screw
Lid with plastic bottle - 2 pcs.
Flomaster,
Sackcloth,
Scissors,
Glue.

Progress:

The big sleep will serve the body of the owl.
On the flat side from above, the two little drinks with self-draws. It will be eyes.
A piece of medium-sized plugs and fastened on the sides of a big sleeve. With painted sides in different directions.
Take the beak do it yourself from a small piece of logs, drink it. Place the bottom between the eyes, attaching the screw.
From the burlap we need to make a ear, placing them over your eyes. Take a small piece, roll it into the tube, making one tip sharp. Split and with glue glue over one eye sharp part to the side. Similarly, we make the second ear.
Eyes make out of the covers. At the eye for the eyes, we attach the lid with a self-tapping screw, and pupils fill with a black felt-tip pen.
Owl is ready. It can be hung on the wall, as it has a flat side, either fix on the tree branch in the garden, decoring it another interesting handicraft made with his own hands.

This interesting stool of wood will be an excellent decoration of the country area, a bath or garden. For its manufacture with your own hands, you will not spend a lot of strength and energy. This stool is distinguished by the originality in the manufacture, since by and large it turns out by itself. You will need several actions at the beginning and at the end of work. For beginner masters, this is just a great way to hone your skills.

You will need:

Log,
Ignition liquid
Saw,
Preparation for the seat round,
Metal brush,
Grinding
Nails
A hammer.

Progress:

Take a log and make 2 cuts, perpendicular to each other, along the full.
Fill in the middle a liquid for ignition and set on fire.
We are waiting for the fire itself will make the legs for the tool and the car.
With the help of a metal brush, we remove the residues of coal and gary.
Then polish your hands the surface of the toaster.
Hand attach the seat on the top of the toaster.
Stool is ready! Excellent and useful crafts from a tree for the whole family.

Video: Master class on making herds with their own hands

Swing for a child do it yourself

If you want to please your child swing, not necessarily buy them. You can make your own hands from wooden skulls very beautiful and safe swings for young children. Safely they because from all sides there is protection against loss in the form of a crossbar. So, let's start the process of performing our homemade interesting crafts at home.

You will need:

Bar 3 × 4 × 37 cm - 11 pieces,
Board 4.5 × 1.5 × 37 cm,
Self-tapping screw
Rope,
Hacksaw,
Pencil,
Line
Drill,
Sculpture.

Progress:

To make our wonderful craft from the tree, put two bar parallel to each other. Top laying 6 duples with the same distance between them and tighten them with self-draws.
We drill holes for fastening a rope from four sides in the corners.
Next, we take the hacksaw and cut off the bar two pieces of 15 centimeters.
Then in the center of the resulting parses drill holes, so we get the front racks of our homemade craft.
We cut the semisantimeter trim in half and vertically drill.
Take a new bar and put on the edges of small lumps with holes. In Bruke we drill holes.
We repeat the same action with two bars and three plates.
The new bar cut off two lumps, 7.5 cm long, and drill vertical holes in them.
Take the rope and begin to collect our swings. We produce two different end of the sides of the seat in such a way that the middle of the rope is under it. So do swing on both sides.
We put on the rack of the rack 15 cm on the front of the swing.
3.5 cm racks put on the rear ropes. Then put on the rear racks with holes with holes, so we make your own hands the back wall of our swing.
On the rear racks we wear bars, 7.5 cm long.
Installing armrests. On lateral rings we put on a plank.
For the rear ropes we put on the two remaining drilled bar.
On the front rings we put on a plank, which will serve as a side for a child.
Now you can hang the swing in any doorway, or in the corridor.

VIDEO: Interesting wood handling with her own hands

Cutting board made of wood

Each of us in the kitchen uses cutting boards, so I want to tell about how to make a board with my own hands to beginner masters. Such an interesting handicraft can be used in the kitchen, give friends and relatives, or use as a basis for burning on wood or other works.

You will need:

Board 20 × 70 × 40 mm,
Glue,
Clamp - 2 pcs.,
Plane,
Electrolovik,
Drill with a drill
Sandpaper,
Creosote.

Progress:

In order for the aircraft to get such as required, the boards need to be glued together so that one wide board turned out. To do this, smear the sides of the boards with glue and with the help of two clamps tightly tighten each other.
After drying the glue, remove the clamps and process the board using the plane so that it becomes smooth and smooth.
Now draw the desired board shape and cut it out with the jigsaw.
In the top of the board, drill a hole so that in the future our craft can be hung.
We proceed all sides of our boards with sandpaper so that it becomes perfectly smooth and without burrs.
After Occarification, treat your board with creosote. Wait for drying.
The board made in a short time of time with its own trees, ready for use!

Crossing game - Tree Noliki game

From the tree you can create not only ornamental and useful crafts, but you can still make the game of cross - Noliki do it yourself. Such interesting work will delight adults and children with their unusual design. Such a game can take time at home and in the country.

You will need:

Circle cut, with a diameter of 20 - 25 cm,
Branch with a diameter of 3 cm,
Cautery on wood,
Hacksaw,
Sandpaper.

Progress:

In order to make an interesting handicraft from a tree with your own hands for beginners without any problems, it is necessary to break the branch to the circles, up to 1 cm thick for the beginning. We need 12 such billets.
Using sandpaper, treat all sides of circles, as well as our field for the game.
Now burn out on the big circle the field for the game, 3 × 3 cells.
On small circles, we need to burn 6 testers and 6 crosses.
Crafts ready for the game!

Snowman made of wood

Such an interesting and pretty child career will become a real decoration of room interior for the New Year 2018 or a gift for friends - schoolchildren. Make such creation with your own hands, children will be able to easily, only need to pay a little creativity of the time and strength, and also prepare a few spikes of a tree. Parental assistance and support will certainly be also not superfluous for beginners. So, proceed to work.

To create it will be necessary:

a piece of wood, 5 x 10 cm;
sandpaper;
white acrylic paint;
materials for the scenery of a snowman: buttons, fabric and other things that you like;
drill;
black marker;
pink colors;
paper;
compass;
polymer clay orange color;
brush and sponge for applying paints.

Work process:

For the manufacture of this craft, you will need to distinguish work on the children's and adult. For a start, the child is 11-12 years old can freely draw a snowman template on a sheet of paper, and then cut it with adults.
Dad or grandfather in turn carries these outline on the tree, circling the line with a black marker.
A carpentry tool will need to cut a fabulous hero, and then polish all irregularities and roughness.
After that, the snowman needs to bring closer to natural color. To do this, you will need acrylic paint of snow-white colors. Cover her all the product and take the time to dry.
The cheeks are created by means of pink paint. The elementary touch of the finger is applied to the blush of our craft.
Packs and mouth painting with a black marker.
Nose - Carrot make it yourself from polymer clay. This part of the work will instruct your child. After drying, attach it to the product with universal glue. In the same way, attach and go to the bodybuzzle of a snowman.
Handles make a tree branches, a gray or brown cardboard hat, and scarf from any segment of the fabric. Here and is ready for our cheerful Christmas handicraft, created with your own hands quickly and easily. For schoolchildren, you can come up with many similar products that they create themselves at home. Perhaps this creativity will turn into a real hobby of your child, and later, and in something more serious.

Vasuchka for live flowers

Another creative work for beginner joiners, which will be subject to schoolchildren 11 - 12 years old, is a vase from wooden sleeps and metal cans. Such a handicraft made with your own hands can be given to your mother, grandmother or girlfriend. Carefully look at the photo and proceed to the manufacture of this interesting product.

To work, you will need:

metal bank;
universal glue;
little spins of a tree.

Manufacturing process:

Adults in advance must prepare wooden sleeves of small size.
Pull the metal jar from dusting and pollution.
In chaotic order, we stick a spike from the tree to the prepared container, ranging from the bottom to the top. The gaps should not be in principle. They need to be disguised with small circles of natural material. That's all! Our interesting handicraft can become a gift, and very valuable because it is made with your own hands.

Finally

So our article came to its conclusion, which provided you with some simple and morestary crafts from the tree with their own hands for beginners of joinery. The ideas and video proposed by us are quite varied and colorful, informative and meaningful. This material is quite abused for beginners who want to reveal in the area of \u200b\u200bthis carved art. Pay this information a little time, learn and apply your knowledge in practice at home to create the best work for beauty and benefit. By the way, if your children are also not indifferent to this type of needlework, then boldly bring them into their creative company. Together, as they say, and worry fun. For the children, you can find some simple crafts that they will be able to create a self-like self. Fantasize, embody your dreams into reality, decorate your creations all around, please yourself and your loved ones.

In the world of high technologies, it is quite simple to purchase any item for home use. True, the result is not always pleased, but the crafts from the tree made by their own hands bring much more joy. Most often, such products emit love and kindness, individual and unique in their kind.

If you look around, the trees are a real storehouse material for creativity. Thin and thick branches, pieces of trunk, lamps, skulls can turn into a real masterpiece if they are in the hands of the master. From the tree will find their place in any room, whether there are a cottage, an apartment or an office. In addition, things like a box, a cutting board, a hanger or a blade for frying are considered important objects of homemade utensils. As practice shows, everyone can make a wooden handicuit who makes the wise advice of experts.

All ingenious simply

The world around the world is full of brilliant ideas that often remain in the shade of human attention. Yellow sun on blue sky, rain droplets, snowflakes, flowers. Sometimes people do not notice under their feet of amazing beauty, but not only creative nature.

Crafts from wood - a great opportunity to express yourself in practice. There are a lot of ideas for creating original wooden products. Basically, they are made of materials:

thin and thick sleeves;
branches;
hemps;
bark.

It's pretty easy to make it yourself crafts from a tree, using a spice of an ordinary log. It can be asked for those who harvest firewood for the winter, cutting the grinding trunks of thick trees. Of course, no one will refuse this creative person. When Ipell turns out in the hands of the wizard, it is waiting for a complete conversion.

Since I slept almost always a round shape, you can make various crafts from it.

Sun of precious stones

Nowadays in many stores sell various shapes and decorative glass pebbles. They can be attached to the wooden sleeper in any order and it turns out an original decoration for the garden. In a wooden basis, with the help of a drill, holes are done to fit pebbles there.
Paste them there and decoration is ready. It is attached to any design in the garden, whether it is a tree, a gazebo or bench. If you get bright light on it, the garden will fill with multi-colored lights of solar bunnies.

So that the thing lasts as long as possible, sleep prerequisite to dry.

Tree kitchen utensil

At all times, cooking facilities made of wood were widely used by experienced hostesses. Skillful masters and lovers to create useful things can make items from wood:

stands for hot cups or plates;
trays;
cutting boards;
napkin rings.

For the manufacture of the stand under hot, thick branches are cut into several round sleeps with a thickness of approximately 5 mm. This is done using an end saw or hacksaw. Ready parts are treated with sandpaper. The bark, which is located on the edges, serves as an element of the decor, so it is not cleaned. But it is not fundamentally. You can remove it with a sharp knife.

If the elements are ready, proceed to gluing. First lay them on a flat surface so that they touch each other. Then smeared with glue and build a small pyramid in a checker order. Surplus glue is cleaned with a clean cloth and put a product under the gilt so that the details are well bored and dried.

The first row of sleeps should be arranged face down to the stand look beautiful.

The photo shows the original trees made of wood for the kitchen made by their own hands. Each of them differs in size and style, but filled with love and warmth of the soul of a good master. As can be seen, you can even just decorate sleep with a pattern so that the charming stand is under hot.

Cheerful decorations for giving

Country house is often considered a place of rest and merger with nature. Therefore, dackets try to decorate the garden plot with original things. Wonderful supplement for flower beds can be crafts from a tree for giving, made by their own hands. They are different in difficulty, but some are available for inexperienced masters.

Classic example is a wooden owl. To craft, you will need one large sleeve, which will become a lush bird body. The eyes make a smaller round, attaching them to the body with self-drawing. Pupils are isolated using covers.

To get wings, sleep medium sized is cut in half. Fix the parts on both sides of the body, directing them in different directions. The beaks are made separately - cut off the logs and attach between the eyes. The ears are mastered from a piece of burlap. Twisted it into the tube and a sharp angle up stick over the eyes of the owl. Similarly, the second ear will receive. You can put it on the log cabin of a small tree, putting it right on the grass.

To make a pretty owl, some masters use ordinary pieces of cortex. First, the material attached to a rounded form, but on the upper corners there must be pointed protrusions. This is the ears of the wise bird. Eyes are made from such materials:

hats of small acorns;
spice thin twigs;
from cuts of dry fruit.

Wings are cut out of small pieces of cortex, attaching them to the body. Such a bird is often hanging on the trees or shrubs of the garden.

In addition, miniature crafts are obtained from small sleeps and small logs. These can be cute birds or bunnies, which are placed on the territory of the country area.

Original creation is also considered to be air crafts made of wood. First, on a thick wooden spire draw sketch. You can use stencil. Next, mark the main corners with the help of a drill, and then the electric logs is cut out the drawing. It turns out an original decoration that remarkably fits into the household plot.
The photo shows various crafts from wood that make many dachensons:

All crafts must be treated with a special solution and lacquered. So they will serve for the benefit of people longer.

Children and crafts from wood

Almost all the kids love toys made with their own hands. They mashed them out of paper, fabric, foam and plasticine. Especially appreciated wood crafts for children who bring them a lot of joy.

In the country gathering, there will certainly find hemps, spins and branches of older. And this is the invaluable material to create with their own hands. It turns out that children can hardly dress hemp, creating all new images. To do this, it is enough to take old flaps of fabric, washcloth, twine, corks, glue and your fantasy and an amazing handicraft will appear on the site.

Teenagers, of course, want to make a more complex toy to surprise the parents. Therefore, they are extremely needed drawings and schemes of crafts from wood. It is they who help to present the future product, and seeks to a given goal. It is especially interesting to make the toys from the cut-off shields that are imposed on each other. As a result, the volume is created and wonderful crafts are obtained.

For example, a pretty cow is made of 3 parts of a wooden shield. One is her head, the second shield is the body, and the bangs and spout are the third part. Similarly make both a polar bear.

Depending on the toy character, it is desirable to pick up the color of wooden structures.

Wonderful wooden crafts are obtained from the basis on which a factory drawing is preserved.
If you take a few layers of brown color and cut the outline of the wolf, you can get a beautiful craft. One layer is a torso, and the tail and tail are imposed on it. Just, beautiful and fast. The same approach is applied when creating a pretty clarification. For this cut from wood details of the bird. The amount depends on the scheme or sketch of the crafts. Then they are applied by layers to get a duck.

If you want to get a bulk toy, it is advisable to impose more layers on each other. In the same method, any convexities on the crafts are made of wood.

To get unique crafts for children, they are painted with paints. The wise parents make it together with the child, taking sickness. They give the eyes, facialy, the color of the animal, some folds or stains. Such works are often decorated with country courts.

An excellent opportunity to show your talent is provided to those who want to make an applique of wood. The main part for work is a solid wooden board.

Do not save and take glued shield. When grinding, the design loses strength, and the sutures protrude. It will spoil the craft.

Before starting working with a tree, on paper draw a future handicraft, separating it into the details. Each of them gets its number. Further, the sketch is cut into parts by contours marked in the figure. Elements are applied to the board, rub the pencil and cut down.

The edges of the finished parts are smoothed with carpentry tools. Sharp corners are a chisel, after which they are watched by sandpaper. If there is a grinding machine, you can use it. After that, all the elements are stained with a mourn. To obtain different tones, it is applied in several layers. The smaller the little it will be the item. When all objects are dried, they are gently glued on paper.

Wood Crafts Making Schemes

Original trees appliques - a great opportunity to spend useful time with children. After all, such classes not only unite families, but also develop the creative abilities of the future generation. And the house is filled with many wonderful things.