How to make a table in a garage with your own hands? DIY metal workbench: drawings DIY garage table drawings

Initially, the owners of the boxes begin to make a table in the garage with their own hands if there is a need for processing wooden products, and also periodically requires a place to fix the blanks. The classic version of such a workbench consists of a tabletop in which several holes of different shapes are cut, wedges are hammered in and combs are inserted for the stop.

This is the very first version of garage tables, which was used 20-25 years ago. Now the garage table has many shelves and several cabinets, and the design itself has changed over time. Let's start the article with a description of the construction of a garage workbench.

How to make a table in a garage with your own hands - a description of the design

The simplest version of the table is made from the following elements:

Frame made of wood or metal with 4 legs;
Worktop, 6-8 cm thick with a flat surface and smooth corners;
Shelves and pull-out cabinets for storing tools.

If you need to make a table for working with metal products and spare parts, then you should get a locksmith's workbench. In case you need to periodically carry out car repairs and various carpentry work - a wooden workbench for the garage will be enough. Consider how to make a do-it-yourself locksmith table for a garage.

Locksmith table for garage

In order to correctly make the frame of the structure, you must first acquire a drawing or table plan. With the help of a clear model, you will be able to correctly represent the finished result and carry out all the work step by step. If you need not only the carpentry in the garage, but also a place for processing steel objects, then you can follow the following plan:

To give the frame rigidity, it is necessary to use an iron corner (the thickness of the corner is 5 mm, and the rib must be at least 35 mm),
In the form of a table top, you can use a 2 mm steel sheet,
We straighten the metal sheet and fix it either on a 50 mm board or weld it to the frame from the corner,
For pull-out shelves, there is no need to use thick boards - simple plywood is also suitable,
In the form of corners for drawers, you can use a corner of 3 mm,
If you do not need a portable or folding table in the garage, then you can make a stationary frame fixed with anchor bolts,
Along the contour, we weld the metal tabletop to the corner and clean the drops until smooth.

The metal garage table is a versatile option for any room. Making a wooden work table for the garage with your own hands, you can create a convenient place for processing any products. Next to such a workbench, you also need to make a chair in the garage with your own hands.

Do-it-yourself wooden desktop in the garage - photo and video of step-by-step instructions

To make it, you need to prepare photo materials and a project. Do-it-yourself photos and drawings of a table in the garage will help you understand what and how a workbench is made of. When building a wood workbench, you need the following tools:

Grinder with a set of circles,
Welding machine and set of electrodes,
Level and 2-5 meter tape measure,
Self-tapping screws with a screwdriver,
Manual jigsaw for cutting plywood sheet,
Electric drill.

Also, pre-prepare materials for a folding work table in the garage:

Several corners 50x50 mm with a shelf thickness of 4 mm and a length of 5 m,
Square tube 60x40 mm,
Steel strip for the curb with a width of 40 mm and a thickness of 4 mm,
Metal sheet for table surface 2.2x0.75 m,
Planks for wooden lathing (timber 50x50 mm),
Pieces of plywood for drawers and desktop walls,
Metal guides for cabinets and a set of self-tapping screws / screws for connecting all elements.

Stages of making a table for a garage with your own hands with a photo

First, we cut all the materials into the necessary elements. We make a frame with the help of shaped pipes. Steel corners are intended for stiffening ribs. It is also necessary to additionally prepare a corner for edging the table surface.

Next, you need to properly weld the power frame of the workbench. First, we weld all the cut elements for the countertop. Then, to the finished frame, you need to attach the frame from the corner by welding, into which the boards for the tabletop surface will be inserted. After we actually succeeded in making the table for the garage in the form of a frame, it remains only to weld the side legs around the entire perimeter of the workbench.

The next step is to weld the drawer structure. In this case, a square frame for boxes is made from a pipe, which is fixed to the tabletop from 2 sides of the workbench. The frames will only need to be reinforced with longitudinal ribs.

The metal frame of the desktop for the garage is completely ready, it remains only to fix the crate of the finished panel to fix the spare parts and equipment. As a result, it remains only to fix the panel by welding it to the table top.

In fact, a folding table in a garage is made according to the same principle as a stationary one. The only difference is the use of hinges, which are fixed to the side of the table. After the construction is made, it remains only to grind and paint the tabletop along with the frame well. If you want to extend the operating time of such a workbench, it is best to treat the boards and cabinets with an antiseptic.

Do you want to ensure maximum comfort when working with your workplace? Make a sofa in the garage with your own hands and fix a stationary lamp above the table, which will have a bendable stand. With the help of a small lamp, you can easily direct the light to the right places when repairing and cutting products.

It is quite simple to make a locksmith's workbench in a garage with your own hands. The main thing is the ability to perform locksmith work: to put a correct and reliable weld seam, to work with a mechanical and power tool. The work is not difficult, but it requires attention and understanding of the operation being performed.

When decorating and filling the garage with equipment, it sometimes seems that it was very easy to build the box itself, but various little things are annoying. But it is necessary to do it, and therefore, before performing the work, it is necessary to analyze some theoretical questions.

Design features

A homemade garage workbench is often positioned with an office desk. With its presence and features, it provides the equipping of the garage with tools, various parts and equipment:

As a rule, locksmith or machine clamping devices, sharpening machines are installed on the tabletop. The countertop itself is made from various materials available to the owner.
The frame is the supporting element for the rest of the device.
Bedside table with drawers for storing various devices, tools, consumables. Several bedside tables can be installed, not only with drawers, but also equipped with shelves.
It is possible to manufacture additional shelves between the side tables.
We attach a protective screen to the garage wall to protect the painted walls from sparks (when working on emery) and mechanical damage. It can be used to make a great place to store locksmith tools and wrenches, as well as install fluorescent lights.

Depending on the place of installation and the wishes of the customer, the design of the workbench can be different, but its type does not change from equipment.

Varieties of garage equipment

A do-it-yourself workbench in a garage and in an industrial environment is made of 2 types:

construction intended for a car mechanic;
if you like to do carpentry in your free time, such a box should be equipped with a carpentry workbench.

A do-it-yourself wooden workbench for carpentry can be made and installed indoors if you need it. If you are not a carpenter, he will only take up space. To carry out work related to car maintenance, it is customary to install a metal or wooden structure, but precisely for locksmith purposes. It is better to sheathe the tabletop with a sheet of steel, you can lay DSP slabs. The most stable is a metal workbench in the garage.

Instructions for craftsmen

Before work, we will prepare the tool and blanks.

Advice! The quality of work and the time spent on its implementation directly depend on the choice of equipment and the ability to apply it in practice. Another important factor is the quality of materials for making a do-it-yourself desktop in the garage.

Preparatory work

For the manufacture of homemade products, we collect the tool. We will be helped in our work:

angle grinder with cutting and sharpening wheels;
welding machine and welding electrodes (ANO-21, MR-3);
welding mask and overalls;
plumb line or level;
5 meter tape measure;
electric drill and screwdriver;
If you are going to work with wood, we select a reliable jigsaw or hand saw.

Now we are determined with the materials for the manufacture of a workbench for the garage:

First you need to decide on the dimensions, make drawings or a sketch. For clarity, let's take the dimensions: length - 2 m, width - 50 cm. Based on these dimensions, we need to purchase:

steel corner with shelves 50 mm - at least 6 m;
Corner 40 - at least 8 meters;
profile 40x40, wall 0.15 cm - 24 meters;
steel strip 50x5 - 7 m;
steel sheet, 1.2 mm thick - 2000x500 mm;
board 50 mm for the table top, the amount depends on the width of the board;
board 25 mm or plywood for shelves and drawers;
MDF or fiberboard on request, for sewing the sidewalls;
Screws, screws, paint, primer, drawer guides.

Having finished preparing for work, we begin to make a metal workbench with our own hands.

Step-by-step instructions for performing work

It is quite easy to answer the question: how to make a workbench in a garage with your own hands. We will follow several instructions and rules for carrying out work:

We cut off the workpiece of the required length with a grinder.

We prepare 4 longitudinal parts for the frame: the length is 2 meters from the profile and 4 jumpers, their length is 420 mm. From the corners we cut off the stiffeners and lintels for the shelves.

We start assembling the skeleton of a workbench for the garage with our own hands.

To do this, you need to build using the following scheme:

We weld the upper and lower frame and assemble the workbench body. To do this, we assemble the frames by welding 4 legs to them. The height of the legs is no more than a meter. The basic structure is ready.
We tighten the structure by welding the stiffeners from the strip and corners.
We mount and install fasteners for shelves, drawers and their guides.
The crate is assembled for a protective screen and for hanging wrenches and other tools. To do this, weld the racks from the corner on the corners of the tabletop and overlap them on top with a horizontal corner along the entire length. For reliability, you can weld a stiffener from the strip. We sew up the screen with a sheet of plywood or DSP. Then, we arrange individual places for the location of keys and other locksmith tools.
After completing the main assembly of the structure, it must be degreased and painted with any paint. The best choice is hammer paint. It is more resistant to mechanical damage.
We make shelves and boxes from plywood sheets. We assemble the boxes using small pieces of a corner and twisting them with plywood parts. We fasten the guides to the boxes, fix the handles. We saturate with impregnation and paint over.
We fix the selected material on the tabletop - it can be plywood, DSP sheet or boards. Having previously treated with impregnation from decay, we fasten the tabletop to the base with self-tapping screws for metal. The heads of the self-tapping screws, made under the sweat, are buried in the countertop, putty and then painted over with paint.
On top of the table top, we lay and fasten a sheet of metal, cut to the dimensions of the table. We paint over it with paint.
We install boxes, shelves, tools for fastening the tool on the screen. We check the location of the workbench in terms of level and the reliability of the assembly.
Now it remains to install a locksmith vice, a sharpening machine, arrange garage belongings on the shelves and hang up the tool.

Everything. We answered the question: how to make a workbench with your own hands.

In conclusion, it is necessary to recall some of the main points.

The structure of the garage workbench must be stable and stand without distortion or wobbling. For better stability, it can be pulled to the wall with an anchor.

Organize your workplace so that nothing interferes with your work.

All protruding parts must be ground and free from burrs.

Keep your work area clean and clean up spilled oil, shavings and other debris.

With proper work and proper maintenance, your workbench will withstand a load weight of at least 250 kg and will last a very long time.

Everyone knows that a garage is necessary in order to put a car in it. However, many car owners use this room as a warehouse for unnecessary things, and if space permits, then they convert it into a small workshop. Therefore, the appropriate equipment is installed in it - racks, shelves and a workbench. The latter is a multifunctional working table used for processing various materials, carrying out locksmith, assembly and electromechanical work. Garage workbenches can be made by hand.

Garages are predominantly rectangular, therefore, when choosing a place for a workbench, certain features of using the future workplace should be taken into account:

If the width of the garage is sufficient, then one of the long walls of the building will be the optimal place for the workbench, since this will allow the table to be of the required length and provide access to the workbench from three sides, which is very convenient, especially in the case of two people working at the same time;
If the workbench is installed at the end of the garage, you can take out all fasteners for the vice and other devices to the front of the tabletop, distributing the holes for clamps and other tools along the front longitudinal side of the table;
Another option for the location of the workbench is along a long wall with an emphasis on the end wall, which makes it possible to use the approach to the table from both sides.

Advice! If on the side of the workbench adjoining the wall, you fasten vertical posts with crossbeams, you can conveniently place various tools on hooks or other types of holders, which will always be in sight.

The first experience in building garage equipment might be a simple wooden workbench or a wooden workbench. The design of a table from a bar is more affordable to manufacture, working with a saw, jigsaw and drill is much easier than cutting and welding a steel corner, from which professional-quality locksmith tools are usually made.

We build a wooden workbench for assembly work

To build a workbench, we need:

Wooden beams, preferably oak or pine, about 12-15 m, the cross-section of the material is selected individually, based on the expected load on the workbench;
Sliced edged board, 20-30 mm thick, flat, without knots and surface defects;
Plywood sheet, 6-8 mm thick, three sheets 200x60 cm;
A set of self-tapping screws for wood and steel corners, shelf size 50 mm and length from 50 to 70 mm, at least 40 pieces.

Advice! All cutting work must be performed using a hand-held or stationary circular saw, trim the edges of the timber or boards only with a jigsaw or a similar power tool.

In this case, even in the absence of carpentry skills, the cut turns out to be smooth, respectively, the entire structure of the workbench will look like a factory one.

At the first stage, we make the frame of the workbench, while taking into account the size of the space in the garage. To do this, you will need to cut four vertical posts, four horizontal beams and five horizontal short cross-braces from the timber. If the dimensions of the wooden workbench for the garage do not exceed two meters, you can use a bar with a section of 70x70 mm.

We cut off four vertical racks - two 90 cm high, two 150 cm high. The latter are made 60 cm higher; after the workbench is assembled, a plywood screen will be installed on them for the tool stored in the garage.

The horizontal beams are also of different sizes. To bandage the support racks of the frame in the lower part of the workbench, we cut off two sections of the timber of 150 cm each, for fastening the tabletop, 200 cm pieces are needed. The last of the material remnants is to cut the transverse struts 60 cm long.

We assemble the entire structure using steel corners and self-tapping screws, as shown in the diagram.

We assemble the tabletop by gluing together from plywood sheets and boards. After leveling and adjusting the dimensions of the boards and plywood, coated with PVA-M or wood glue, we collect in clamps until they dry completely and gain strength. We sew the tabletop along the contour with self-tapping screws.

We lay the tabletop on the finished frame and fix it with self-tapping screws, after which the surface is carefully sanded with an emery nozzle for an electric drill. The last one to install the screen and cover the entire structure with varnish, so that in wet weather in the garage the wood of the workbench does not "lead".

In appearance, the workbench for the garage turned out to be quite openwork, but in reality its strength is enough to withstand a load of more than one hundred kilograms. To increase rigidity, the rear pillars can be anchored to the garage walls.

Required tool:

Grinder with a wheel for cutting metal and a grinding disc.
Welding machine and electrodes.
Overalls and protective equipment for welding.
Level.
Roulette.
Screwdriver.
Jigsaw for cutting plywood.
Drill.

Necessary materials:

Corner 50 mm by 50 mm, thickness 4 mm, length 6.4 m.
Square tube 60 mm by 40 mm, thickness 2 mm, length 24 m.
Corner 40 mm by 40 mm, thickness 4 mm, length 6.75 m.
Steel strip 40 mm wide, 4 mm thick, 8 m long.
Steel sheet for table top 2200 mm by 750 mm. Thickness 2 mm.
Steel sheet for making drawer holders. Thickness 2 mm.
Wooden boards for countertops. Thickness 50 mm.
Plywood for the manufacture of drawers and for the side and back walls of the table. Thickness 15 mm
Drawer guides.
Screws for assembling plywood boxes.
Self-tapping screws for metal.
Anchor bolts.
Paint for wood and metal.

The workbench, which will be made of these materials, has quite impressive dimensions: the length of the table is 220 cm, the width is 75 cm. The overall design and a large table top allow you to place a vice and, for example, emery or other tools at different ends of the table.

First step making a workbench is cutting the available material into elements. The profile pipe is intended for the manufacture of the frame. The steel corner is designed to create stiffeners. It is cut into pieces and a power frame is formed from it. Also, a steel corner is needed for edging the tabletop on which the boards will be laid. The steel strip is intended for the manufacture of guides on which the side panels will be attached. Also, this material will go to brackets for attaching boxes and plywood. The desk drawers are made of plywood.

Second step- welding of the power frame of the workbench. The first elements of the table top are welded - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame should be welded so that one more frame from the corners can be welded on top of it, into which the boards of the table top will be laid. To reinforce the countertop, it is required to weld on a few more steel pipes after 40 cm, which will serve as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power jumpers are welded between the legs, reinforcing the structure.

After the base frame is ready, you can start welding the structure for the boxes. For this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. The frames are reinforced with longitudinal stiffeners.

Third step- fabrication of a frame for a table top. Two steel corners, 2200 mm long and two more corners with a length of 750 mm, are needed to make the frame. The structure is welded so that wood planks lay inside it.

The frame from the corner is laid on the frame made of pipes and welded. It turns out a reinforced tabletop, 8 cm high with internal stiffening ribs.

The metal frame of the workbench is almost ready, it remains to weld the panel crate for fastening the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle for reinforcement. The toolbox is welded to the worktop.

A frame made of corners and pipes is ready. You can begin to strengthen the structure. Brackets are welded to the sides of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Using these holes, the side and back walls of the plywood table will be attached to the metal frame of the workbench.

Fourth step- production of drawers for the table. Plywood is cut into blanks, which are twisted with screws. The number of drawers depends on what will be stored in the table. If small parts, then you can build 3 boxes, if large - then 2. It all depends on personal preference.

Drawers can be positioned on both sides of the table, pull-out structures can be mounted on one half, and ordinary open shelves on the other.

After the drawers are assembled, you need to weld metal strips with holes between the sides of the drawer sections. A slide for the drawer guides will be attached to these holes from the inside.

Fifth step- laying the boards in the tabletop frame. Boards with a thickness of 50 mm are cut into workpieces of a certain length. If a long board is available, then you need three blanks 245 mm wide and 2190 mm long. If long boards are not available, you can lay the workpieces across the table. For this purpose, wood with a width of 205 mm is cut into 10 pieces with a length of 740 mm.

Before placing the wood in the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then it is imperative to paint the entire metal structure of the workbench. This will protect the metal from corrosion. It is best to use a weatherproof and anti-corrosion coating option. The welding seams should be painted especially carefully. It is recommended to thoroughly clean metal drops and irregularities before painting. This can be done with an angle grinder with a metal disc.

After the structure is dry, you can start laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that the tree tends to expand and dry out when the temperature and humidity change. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded to make it easier to lay the sheet metal over the wood. Boards along the entire perimeter of the table are screwed to the frame with self-tapping screws.

Sixth step- fixing the top steel sheet. It can be welded to the worktop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach the steel sheet with hidden self-tapping screws to the wood planks. Previously, the metal must be painted on both sides with a rust converter. This covering material looks like a transparent paint and varnish coating, it is easy to restore and reliably protects the metal from rust. You can also paint the metal countertop with the paint that covered the frame. It will be nice, but over time the paint may scratch and the table will not look too new.

The final step- installation of boxes on guides and fastening of plywood to side walls, shelves and a power board in front of the table. This work can be called finishing the workbench. After the work with plywood is over, it must be coated with a compound that will protect the material from environmental influences. Also, do not forget about the design of the power shield for tools. You can attach special hooks or self-tapping screws to it, to which the necessary things will be hung.

In order to make it convenient to work at the workbench, you can attach a special lamp with a bending stand to the power shield. In this case, you can optionally direct the flow of light to the desired location.

A vice is an indispensable attribute of a locksmith's workbench. It is not recommended to attach a clamping tool weighing several tens of kilograms to the worktop itself. It is best to place a 1 cm thick metal gasket between the table metal and the tool. Drilling holes for anchor bolts is required in the gasket. Then, in the same places, drill holes of the same size in the countertop. The whole structure is fastened with anchor bolts.

* If the required desktop was not found, then contact our manager. We have our own production and we will make you a garage workbench to order. Will come out more expensive. But we will take into account all your wishes.

How to choose a garage workbench - 5 parameters to consider

A garage is very different from a professional workshop or a factory floor. Most often there is a household series "Levsha" or "Compact" - compact. Because professional desktops "Svyatogor" and most of the "REGline" line take up a lot of space and are professional.

However, both will do. The main thing is to make the right choice. What you need to consider when choosing a "garage workbench":

size of the area for placement(if there is very little space, then compact workbenches are the best option);
permanent or temporary installation(we have a folding table for sale);
type of work... Most often, locksmith tables are bought in garages. But if you like carpentry, it is better to look at wooden workbenches;
financial opportunities("REGline" is an economy class, then "Levsha" comes);
aesthetics... There are people for whom it is important that their workplace is beautiful, and only then durable, comfortable and functional.

Originally the workbench was used exclusively when processing wood, and its main task was to secure the workpiece for the stop in the use of tools. For this, holes of various shapes were cut along the edge of the tabletop, wedges were hammered in, combs and chocks were inserted for an emphasis or as guides. This workbench got the name classical.

The simplest workbench design looks like this:

supporting frame with legs;
thick table top with a powerful surface;
additional shelf under the table top for storing tools and accessories;
shelves or drawers that increase storage space.

Interesting: The computer game is popular now Minecraft, which, to stimulate creativity, invites players to create virtually wood workbench from A to Z, in any modification.

Improvement of instrumentation, the appearance of electrical equipment affected workbench modifications... And the manual processing of a new material - metal - has created a completely new type of desktop for locksmith work. So by appointment today workbenches are distinguished:

carpenter's;
carpentry;
locksmith;
universal.

DIY table in the garage - photo options:

The working table in the garage can be designed for a different number of workers, or zoning places.

In this case, workbenches are distinguished:

single;
double;
multi-seat.

The addition of the capabilities of a specialized workplace has given rise to the following varieties:

folding;
mobile (on wheels);
wall folding workbench;
workbench cabinet (with sections for storing tools).

According to the material from which the working table is made for processing materials, they are distinguished:

wooden (made of durable wood);
metal (welded structures);
combined (the wooden base is reinforced with a metal sheet on the table top, supplemented with metal combs, threaded screws; the metal case is equipped with wooden shelves and drawers).

Important: The metal parts of the workbench need anti-corrosion coating, and the wooden parts need antiseptic impregnation.

What a homemade garage workbench looks like, watch the video:

What kind of desktop does a car enthusiast need?

There is not much free space in the garage, so it is important to decide for what goals it will be installed:

minor repairs and minor plumbing work;
a constant range of work related to home maintenance, or your hobby;
the amount of work in car care for a complete release from the dependence of the service station.

In any case, the limited space will require from the garage workbench:

compactness;
sustainability;
versatility;
illumination;
performing the storage function;
safe connection to the mains;
raised above the floor by 15 cm for high-quality cleaning.

Garage workbench dimensions(standard - 6x4) cannot exceed 60 cm in width and 1.5 m in length. The height of the workbench in the garage is determined based on the height of the owner, up to the middle of the hands in a standing position. The best choice would be a metal structure, since most of the work in car maintenance is locksmithing. For the greatest stability, it is recommended to support the supporting frame with 6 legs, or even 8.

Seat selection- also the specificity of a garage workbench: after all, it should be convenient to work on it with a car standing in the room. And, at the same time, it is recommended to remove it from the vehicle by at least 1 meter. With a purchased copy, it is difficult to take into account all these subtleties.

Do-it-yourself garage workbench - drawings:

If you make a workbench with your own hands, which one - wooden or metal?

Wooden - easier to manufacture, but ...

The choice of the species again determines special purpose: faster and for simple operations - a wooden frame made of a powerful board (40x80mm) or a bar (50x100), assembled into a rectangular structure according to standard dimensions, using self-tapping screws or nails, will also be acceptable. For reinforcement of the structure use wooden spacers between the legs (top and bottom). The lower ones (at the level of 15 cm from the floor) can form the basis of the storage shelf.

The table top is assembled from a planed grooved beech (oak) board or two sheets of moisture-resistant plywood 18 mm thick, glued together and sheathed along the edge. For special strength the surface of the countertop is upholstered with a 5mm thick metal sheet, making a side from the side of the wall.

However, if you make a wooden workbench in the garage with your own hands, then this option has its drawbacks:

it is not designed for a large forceful impact;
it is difficult to place several necessary devices on it at once: for drilling, sharpening, heavy locksmith's vice;
the wear of the wood bed is short-lived;
wood deteriorates from spilled oils and paint, fills pores and cracks with metal dust and shavings;
there is still a fire hazard.

See how to make a workbench in the garage with your own hands - photo:

Metal work table - the right choice

Advantages of a metal workbench for a motorist:

compactness of all structural elements with increased reliability;
the ability to withstand any forceful effort;
additional weight for stability;
the ability to take into account the features of the room, making the workbench mobile, folding, folding, shortened;
increased strength of the welded structure;
tabletops can be completely made of metal with a 3-sided rim;
the table top has no sharp corners (for safety);
complete with 2 vice and clamping screw;
holes for clamps and stops are provided;
allows for sawing and cutting metal, turning and grinding;
the ability to fill the space under the countertop with any storage devices (shelves, drawers, organizers, nets);
the reliability of fastening boxes and shelves is ensured;
metal shavings are not clogged in the cracks;
it can be used for processing and wooden parts;
safety in conditions of fire risk;
saves the efforts of the employee;
such a table is easy to clean.

For your information: A garage workbench made of metal is a hit of sales of specialty stores, where only price and design improvement are of decisive importance.

But the craving for creativity leads along the path of their own experience.

A useful video on how to make a do-it-yourself locksmith's workbench for a garage:

How to make a metal workbench for a garage?

Algorithm:

Choose a place, taking into account all the requirements for placing the car in the garage.
Prepare a solid foundation for installation.
Measure the installation site.
Create a sketch of your idea with all the details and improvements.
Prepare the necessary material and tools.
Prepare structural elements.
Think over the technology of assembly and reinforcement of the frame.
Assemble the product.
Cover with a primer and a protective coat.
Conduct functional and security testing.
Attach the necessary equipment to the countertop.

Material required for work:

metal hollow profile (4mm) for legs;
metal equilateral corner (50x4mm) for drawers, prongs, guides for shelves;
galvanized sheet metal or stainless steel for countertops (5 or 2mm);
metal strips for the installation of sides;
grooved board (50x150mm) for a wooden tabletop with metal upholstery (as an option);
self-tapping screws;
primer and paint for metal.

The tool that will be required in the work:

level, tape measure;
drill;
Bulgarian;
welding machine.

Assembly technology:

to assemble the desktop, a one-piece welded joint of all metal parts is used (drawers as the basis of the table top, legs, jumpers, rectangles for stability at the ends of the legs);
horizontal and vertical elements are equipped with constant slopes for greater strength;
the table top is made of a solid sheet of metal or a plank board upholstered with 5 mm galvanized iron; in the first case, the tabletop is welded, in the second, it is screwed with self-tapping screws to the collets and additional metal strips;
for the device of shelves and boxes, a corner is welded to the racks as guides (boxes can be either metal or wood); the tree is treated with an antiseptic;
welded rectangles on the ends of the legs increase the stability of the workbench and allow it to be fixed to the floor.

Do-it-yourself metal workbench in the garage - photo drawings:

Last tip: A do-it-yourself work table in the garage (metal) should be done only if you are familiar with the art of welding and the safety rules for carrying it out in practice.