Bench for giving from old iron chairs. Bench with your own hands from old chairs. Bench of curved branches

If you have a few old chairs without affairs, which seem to have long served their own, it does not mean that they are time to attribute to the dump or send to the oven. Think where at home, at the cottage, in the yard lacks a convenient place to sit down. There will definitely use original benches made by their own hands. Show a little fantasy, you will succeed.

Homemade bench

A set of kitchen chairs has become unusable. But only one small idea, and they became the basis for a charming bench. Comfortable spacious furniture made from chairs with your own hands, will take its place in the hallway so that every thing that has been able to sit down and convert.

What will take for work

Before proceeding to creating a bench, prepare everything you need:

Three old stools. If you have a choice, take those that are better preserved.
3 or 2 boards. The quantity depends on the width of the sawn timber. Compiled together, they will become a seat.
2 railing from the old armchair. If not, choose suitable planks.
Emery paper.
Drill with a drill.
Saws.
Clamps.
Lobzik.
Putty on wood.
Dark wood paint in the canister.
Blue paint and roller.
Adhesive protective tape.

Operating procedure

Consider the selected chairs. 2 In the best form, place the sides of the future bench. Check connections. If they are overwhelmed during use, close in addition to screws or screws.
Remove the old soft seats from the chairs.
Drill on the self-tapping screws set the railing from old chairs to extreme chairs. If there are no such finished parts, make yourself comfortable forms.
Carefully consider - it is necessary that standing nearby chairs tightly in contact with the side surfaces of the front legs. If this does not happen, it is possible to cut these places a bit, then polling them with emery paper.
Now, when the adjacent legs are tightly adjacent to one another, apply joinery glue to one of each pair. Then secure them in pairs of clamps until the connection becomes durable.

Attention! In order for the legs, dents are left from clamps, use small smooth pieces of boards, plywood, thick cardboard as a gasket.

In the backs of chairs are metal rods of metallic color. To paint them, pre-cover the protective adhesive tape wooden parts. Then from the canopy sprayed dark paint on metal parts.
You can proceed to the seat assembly. Three boards cut along the seat length three boards. Then the sides should be cut down small grooves for armrests.
At the screws, attach two extreme boards to the sidewalls of the base from the chairs.
To make the stiffness of the structure, between the non-snuffy parts of the nearby chairs, install small wooden inserts, as shown in the photo below. Attach them with the help of glue and on the self-tapping screw, screwing them on the reverse side.
Fill out the putty irregularity and holes on the front side of the boards.
After drying, polish the surface of the boards and side parts, a little round the edges.
Using a roller, apply paint on the bench seat. Do not forget to prejudice the protective tape on parts of the back, railings and legs, which are near.
After the paint dried, we take sandpaper and slightly three legs and the wooden parts of the back, so that the shop was evenly made up, acquired a somewhat rustic look.

The work is completed. Putting a bench into your hall, take care of the decor. Several original bright pads will decorate the bench and make it cozy.

Banquette for home

The banquette is not the most necessary object of furniture, but so comfortable and aesthetic, what everyone likes. Such a seat can be placed in the hallway, bedroom, on the balcony, in the garden, anywhere. This master class is able to turn your dream into reality. Make a banquette of old chairs. Moreover, than the old chairs you will pick up, the more interesting the result may turn out.

Materials and tools

Chairs (preferably with a beautiful bend of the back) - 2 pcs.
Boards.
Plywood.
Thick foam.
Decorative fabric.
Furniture stapler with brackets.
Carpenter or liquid nails.
Drill, screws.
White (color on your choice) paint, brush.
Hacksaw.

Description of the course of work

To work, we will need only one-piece part - the back + rear legs. All other details carefully clean up not to damage the necessary.
For the base benches, we take strong boards. Measure the tape measure the desired seats width - cut the appropriate parts.
The length of the seat of the banquet should not exceed 2 widths. Cut the details of the desired size.
With the help of glue and self-tapping screws we collect a frame. Shlify the sandpaper its surface.
We install the frame in the place where the seats were located, on the self-tapping screw and glue.
Similarly, we collect another frame for the bottom shelf. At her fasten the planks of a lesser thickness. Sandless grunge places with sandpaper. The lower structure will serve as a shelf and an additional edge of the stiffness of the entire design.
We mount the robe-shelf to the legs in the place where the transverse crossbars of the chairs were mounted.
Putty thoroughly fill the grooves with hats of self-tapping screws, irregularities, etc. After drying the means, we grind the surface.
You can proceed to staining the finished base.
It remains to cut the seat of plywood and glue a thick foam rubber on it. After drying with a furniture stapler, cover the seat with a decorative cloth. Banquette is ready.

Original tree bench

Our bench will become an excellent decoration of any garden. On a hot sunny day, it will allow to relax in the shade under the tree at once to everyone who wishes. Each convenient place will receive the same place, because the shop itself is located in a circle.

Of course, such furniture for the garden can be purchased in the store, but it will cost it many times more expensive. In order for the bench from the chair with their own hands, it is no worse than made by the master, you do not need to have professional skills of work. It will be enough for you to get acquainted with the master class and prepare everything you need.

Preparation for work

To create a garden benches, you need to use:

6 completely identical old (or new) kitchen chairs.
Wooden strips width 2.5 cm.
Emery paper or grinding machine.
Drill with self-drawing.
Saw.
White paint, brush.
Roulette, pencil.

detailed instructions

On the prepared 6 chairs, dismantle the seats - they will not need in this project.
If there is a need to pass the surface by sandpaper or with the help of grinders.
Color white paint chairs.
After the paint is driving, put the chairs in the circle backs inside. As you guessed, the bench will be outside. Considering that the circle has 360 degrees, then at the angle of each chair there are 60. Thus, we can try to calculate the size cut for the seats of the planks. If it turns out a little inaccurate, you can adjust the size.
Alternately cut on 6 slats of the same length. Break them to chairs with self-draws so that the center of each plank coincides with the center of the chair. As a result, on each seat there should be 6 planks, each next is the highest of the previous one.
After the final fit of the length of the emery paper, slightly seats, remove the sowers and roughness.
Roulette Measure the distance between the edges of 1 and 6 planks. To this size cut the item.
Having applied it to the seat, make a pencil of the SCOS. Cut extra.
With the help of glue and screws, install the planks, as shown in the photo below.
Do the same with the rest of the future shop.
Collect the set details so that when you touch them it was impossible to be injected.
Disassemble the design again to paint the seat strips.

Congratulations! Your goat for a garden or courtyard is ready. It remains only to find a tree, the land under which will be as smooth as possible, otherwise your work may not get together. Take advantage of the Council - align the ground around the tree using mulch.

Do not rush to throw out old kitchen furniture. Your diligence and fantasy will help to get chairs from the headset with a new life, for example, in the form of a bench. It is not just comfortable, but also interesting, because it is not easy to use it as a shop in the yard. The bench from the chairs is able to become an independent and original piece of furniture in the interior of the residential premises.

Materials

For the manufacture of a bench from old chairs with their own hands, you will need:

four identical stools;
sandpaper;
paint and varnish removal means;
putty knife;
band-saw;
drill and drill;
wooden dowels;
carpentry glue;
wood paint;
brush;
wood varnish;
board;
lobzik;
meter.

Step 1. Take two chairs out of four. Choose those of them that are not as attractive externally. Gently remove the horizontal racks in front of the seats.

Step 2. The remaining two chairs will need to cut the front legs. Before that, using the meter and marker, apply the cut line. They must be held below the front racks on the seats. Cut the unnecessary part of the legs with circular saw.

Step 3. Apply a means to remove varnish and paint to the surface of the prepared parts of the bench. Leave it on the surface of the chairs on the time specified by the manufacturer. By expiration, remove the old coating. For convenience, coarse layers you can remove the spatula. Collect the surface of the chairs fine-grained emery paper.

Step 4. On the prepared racks from the end side and on the chairs stands with the facial, apply marker marker in places where you will drill holes under the dowel. Before applying a drill, be sure to check the correctness of the labels. Drill holes.

Step 5. Insert the dowels into the holes from the end side of the racks. Pre-lubricate them with a joinery glue.

Step 6. After drying the glue, collect the base of the bench. During the assembly, in addition to the joinery glue, we secure the composite parts by self-draws. Once again speck all the surfaces.

Step 7. Seat shop will be fitted under the shape of the chairs. To do this, by fitting, apply the appropriate laying on the surface of the board and all clean the jigsaw.

Step 8. If you have the bench's seat, as in this case, consists of several boards, glue them already fitted with a joinery glue. Hold the design of the clamps and wait for the whole drying of the glue.

Step 9. Stick the seat to the base of the bench. Send you weightlifiers on the board and secure it with clamps.

Step 10. After a complete drying of the glue, take the surface of the seating with painting scotch. All other parts of the bench paint paint for wood.

Step 11. Remove the greasy tape and cover the seating board by the mourn.

Step 12. Color the entire surface of a bench lacquer for wood.

After the coating dry, put the pillow on the bench and enjoy the rest.

Do you want to equip your backyard or cottage plot? For this, it is not necessary to spend big money for the purchase of garden furniture. From old chairs, you can build beautiful benches yourself. The following are two options for such lifehak.

French-style bench

They will need chairs that have a small bend and a visually appearance. Front legs and "sids" dismantle, observing dimension in height and length. Construct a rectangular box for the selected length and fix it with screws, as shown in the figure.

Fastening screws (three pieces) Distribute uniformly for reliable fastening of the structure. At the bottom of the legs also prepare holes for an additional shelf. As a result, it will work out seven nests on each side.

To make the upper part smooth, use plastic molds or chipboard. All prepared holes fill in a special glue, polish surface and apply primer.

At the next stage, paint a bench, color can be chosen in your own way. In our case, this is a cream-white shade.

At the last stage, use an old vatine blanket, taking its size around the edges a little with a margin. After laying the material on the paneur, free parts and grab the stapler.

L-shaped brackets on the screws are suitable for fixing the top to the box.

Design for garden

Do you have a separate tree on the plot? Understand the following option. And if there are many suitable plants, you can organize a whole park for recreation. To create a comfortable garden benches, six old chairs will need.

They need to be cleaned, polished, remove seats.

Arrange the chairs in a circle, as shown in the figure, count the dimensions of the wooden planks that will be used as a seating.

Paint the construction in the selected color, pre-applying primer, mock the design around the tree, enjoy the comfort and pleasant cool on hot days.

When choosing a material, consider that it should not be rough, chairs choose the same size, make sure that they are secure and smoothly stood on the surface.

Suitable

Specified Lifehaki will help equip the place of recreation in the country area or in a country house almost for nothing. If you approach the project with a fantasy, you can implement various design and structural ideas. Do you have such? Share with us!

Babe from broken chairs

The site http://www.anoregoncottage.com has found a great way to save the old broken chairs. Of these, you can make a completely unmatched summer bench.

I think many have such old chairs that fall apart in the literal sense of the word. Of course, they can be thrown away, but you can try to make something very interesting and convenient.

Step One: Find two identical stools

Most of all suitable chairs that have a small bend of the back. It is these backs that we need

Step Two: Creating Seat

Collect the frame of such a length What your bench seems to you and secure every end with two screws (as shown in the figure above). Use reliable wood and long self-tapping screws, because our goal is to create a strong and solid construction

Step Three: Creating a lower shelf

Even after we made the most secure seat, the bench can be all too tole and unreliable. In order to solve this problem, create an additional element of strength - lower shelf

Step fourth: Putty and painting

Fill all the holes in the wood with a special putty, we give the time to dry well, and then thoroughly blame all the surfaces, paint any suitable paint.

Step Fifth: Make Plywood Sit

Cut a piece of thick plywood required size
Covered with pherana with vatin or foam rubber (its size should be slightly more than that of the plywood sheet) and we are tightening the seat with an upholstery cloth. At this stage, the furniture pistol-stapler will be indispensable

Now we can only decide whether to leave everything as it is or add a couple of pillows, because our bench is already ready!

___________________________________________________________________________

Suppose you absolutely need a large amount of money, and obtaining a loan in the bank is problematic due to the inability to provide the necessary documents. And what, the usual thing, it happens when there is no official place of work or the main salary is paid "in the envelope". In this case, one output remains - to contact the company where it is possible, and the entire package of documents will be drawn up not only promptly and competently, but also precisely in the form that will guarantee the Bank's consent to the extradition of the long-awaited loan.