How to remove the blade from the toilet. How to effectively remove the "stone" in the toilet. Liquid battery electrolyte

The perfect cleanliness in the bathroom is possible, but for this you need to make a lot of effort. This is sure most of the owners. However, if you know the nature of the contaminants appearing inside the sanitary devices and use competently selected funds to combat them, the task is greatly facilitated.

Let's talk about how to clean the toilet quickly, efficiently and without much costs.

Sparkling toilet toilet - the subject of pride of any mistress. Only here, unfortunately, he remains not long. After a short time, unpleasant redhead divorces may appear on the surface of the equipment.

These are rust drums, iron oxidation products or other metal alloys. It seems that it is nowhere to take in the toilet, which is made of ceramics using plastic parts.

However, the reasons for the appearance of rust are several. The first is the deplorable state of engineering communications. Old highways were performed from non-galvanized metal, which over time is inevitably corrosion.

Oxisal particles fall into water, which leaves a rusty trace on the surface of the equipment.

Rust drums are very difficult to remove from the bowl of the toilet without the use of special cleaning products found in the household or purchased in the store.

The frequent causes of rust spots also include water-enriched water entering water supply, and leakage of a tank liquid.

In addition to rust traces on the surface of the toilet leaves. The intensity of its formation depends on the composition of water, which is used in the plumbing system.

It requires various mineral compounds that settle on the walls of the toilet bowl and form a unpleasant hard grayish flare. The larger the limestone in the water, the faster the flight appears.

And the third "enemy" of the purity of the plumbing equipment is a blade. It is formed similarly to a lime fall, the difference only in its composition. The stone is formed from the minerals contained in the urine of a person.

With the inactive use of the toilet or with an irregular flush, the residues of urine are delayed on the surface of the toilet, forming a solid blooming of an unpleasant brown-yellow color.

Ideally, for each type of toilet pollution, the special means should be used, it is easier to cope with them. But universal solutions can also come in handy

Thus, there are three main types of toilet pollution. They differ significantly from each other in their chemical composition, respectively, it will be possible to get rid of them with the help of various means. Although there are also universal methods of purification that will help in all cases.

I would like to celebrate another moment. All types of pollution primarily begin to postpone where the surface of the toilet has become rough or microcracks appeared.

Most often, ceramics loses its smoothness after contacting with too hot liquids or objects. It is extremely not useful for toilet and sharp temperature differences, since microcracks may appear as a result.

We must know that the budget models of plumbing produce from ordinary Sanfeayans with a rather high porosity. Such material is inclined to accumulate pollution. It is better to acquire equipment from a plumbing porcelain, which is characterized by increased smoothness of the surface.

Where to start cleaning?

No matter how much the way to clean the toilet can be selected, we should not forget about the preparation phase. First of all, you should take care of protection. All work should be carried out only in rubber gloves.

They will protect the skin on their hands from aggressive cleansing means, and should not forget about elementary hygiene. Toiletz - a place of accumulation of pathogens of microorganisms.

When working with aggressive chemicals, the use of rubber protective gloves is required. Otherwise you can earn allergies or cut the skin of the hands

For the same reason, it is desirable to wear an adhesive or plastic apron. Well, so that it closes as a large surface as possible. So it will be possible to prevent microbes from entering clothes. If you assume the use of aggressive chemistry, you should not neglect the respirator. The respiratory tract should also be protected.

And a few more safety words. Try so that cleaning solutions do not fall on the skin, and the more the more mucous membranes. If drops of funds still got on them, you should immediately wash off their water.

Working with a harsh odor, always leave the door to the toilet room open. Similarly, it should be treated in the case when gas is formed in the interaction of cleaning agents.

Cleaning the toilet is desirable to start with water removal. It must be deleted from the instrument and pour out. To do this, it is very convenient to use a bucket with a long handle. Only after that you can start applying cleaning products.

We are struggling with pollution by folk remedies

Not all hostesses are ready to use aggressive chemicals in the struggle for purity and prefer to manage softer "folk" means. There is nothing wrong with that, especially since these ways are quite effective.

Especially in the early stages, when the plaque and the stone did not have time to harden too much. Consider how you can wash the toilet with popular gentle methods.

Method number 1 - soda with vinegar

It seems that everyone knows how to clean the toilet with soda and vinegar, but there are some nuances here. First we prepare the food soda, it will be quite enough single packaging. After that, we moisturize the inner surface of the equipment, so we will prepare it for processing.

I fall asleep to the toilet soda. It sticks to a wet surface. If there are areas with a bloom and a stone, be sure to literally miss them with damp soda.

The usual food soda is a powerful cleaner, only it needs to be used correctly. It is effective both in separate use and a pair with vinegar

We leave the toilet in this form about half an hour. During this time, the soda will enter the reaction with pollution and starts to destroy them. After the time we take a container with cutlery. If only essence is available, it is better to dilute it. Gently pour vinegar on the surface of the toilet to the soda. A rapid reaction will begin, which will help remove contamination.

We take the brush and rub pollution, "helping" a rapid chemical reaction. After finishing it, we get a brush over the cup and thicker to the toilet. It will take several flushes or, if you don't want to wait until the tank is scored, you can rinse the equipment with clean water from the bucket.

Method number 2 - mustard powder

First prepare a cleaning mixture. For this, we take two tablespoons of mustard powder, add an equal amount of crystalline citric acid and four tablespoons of starch.

Thoroughly mix until a homogeneous mixture is obtained. We begin to gradually add clean water. Still in such a way that it turned out Cashier. This will be our cleaning agent.

A homemade tool based on mustard powder will not only be cleaned, but also disinfects the toilet. Components included in the mixture are absolutely harmless to plumbing

Moisten the surface of the toilet, so that the mixture adhered better. Gently distribute the composition on the bowl. Thoroughly rub the remedy for specially contaminated areas and leave in such a form for about half an hour. After that, we rinse with water and at the same time three brushes. Wash clean water remnants.

Method number 3 - vinegar and salt

This method is especially effective for getting rid of the blade. We need one glass of table nine percent vinegar. If it is not, you can breed acetic acid according to the instructions, which is usually present on the bottle.

Pour vinegar to the dishes, which is not afraid of heating, and begin to warm the solution. It is important to remember that at this moment a sharp smell may appear, so the container is desirable to close tightly.

From the simplest ingredients that are in any house, you can prepare a powerful cleaning agent. But it is important to comply with the proportions to increase the efficiency of action.

The vinegar is heated to a temperature of about 40 ° C, after which we fall asleep the halves of the teaspoon of the salt and mix well. The resulting solution thoroughly process the surface of the toilet. In areas with particularly strong pollution, we increase the amount of funds by rubbing it into a stone.

We close the toilet with the lid and leave it in this state for the night. In the morning we remove the solution along with the contaminants, pulling out water from the tank.

Method number 4 - Wood ash

To prepare a cleaning composition, we will need an equal amount of wood ash and crystalline citric acid. Usually two standard lemon packs and the same amount of ash. All mix well.

Moisten the bowl of the toilet and fall asleep it with the resulting means. Leave in this form overnight. In the morning we clean the toilet with the brush and rinse it, flushing the remnants of the means.

Solutions of different concentrations

As you know, the acidic medium very well dissolves lime deposits and the blade. It is effective and against rust, so acids and tools based on them are considered a good choice for cleaning the toilet bowl.

In practice, you can use various acids without mixing with other substances. The use of orthophosphoric acid is the best answer to the question of how to clean your toilet from rust.

The substance can be easily bought in the store, where it is sold in the form of a 85% solution. The tool is a colorless syrup-like very aggressive substance. You can work with it only using protection.

We prepare the cleaning agent: we take half the liter of pure water and dissolve 100 ml of orthophosphoric acid in it, mix until a homogeneous mixture is obtained.

Acids are capable of cleaning almost any contamination, but it must be remembered that they are able to spoil plastic parts toilet and pipelines

The bowl of the toilet is degreased by washing any soap detergent. After that, we apply the prepared cleaning agent, process the surface with a brush, better with natural bristles. Leave a bowl with a solution for a while. Depending on the intensity of pollution, it may be necessary to be required from 1 to 12 hours.

After time, we rinse the toilet to the weak soda solution. For its preparation in each liter of water, we dissolve the tablespoon of soda.

A hydrochloric acid is used to remove rust and plaque. But you need to know that it cannot be used for equipment with plastic and rubber parts, as well as its use is excluded if the toilet is connected to the plastic pipeline. Acid solvent plastics.

Approximately half of the hydrochloric acid is poured into the bowl, where it is left for 15 minutes. The surface is then washed with clean water.

It can be used for cleaning lemon and acetic acids. Since their effect is somewhat weaker, the best results gives such a technique. The toilet paper is impregnated with vinegar and laid under the rim and contaminated areas.

Similarly come with citric acid, but since it is crystalline, it can be more convenient to apply on a wet fabric. The remedy is left for several hours, better at night. In the morning is washed with clean water.

Similar to citric acid used sorval. This is an inexpensive tool can be purchased in business stores.

Sorrelic acid is also widely used for plumbing. Powder is applied to a wet cloth and impose into contaminated areas.

You can often hear tips on using an electrolyte for a battery as a cleansing agent. This is really effectively, only you need to remember that the composition of the liquid includes acids, so you do not need to forget about caution and protection. An electrolyte is treated with a bowl, leave for 20 minutes, then wash it off with water.

Abrasives are necessarily present in the compositions of this type. These are very small, but sharp and solid particles, with which mechanical surface treatment is carried out. Abrasives literally rip pollution by removing them by surface. They are added to the composition of cleaning products in different quantities.

In any case, such mixes are undesirable to use on ceramics. This is especially true for plumbing porcelain. Abrasives leave on the smooth surface of traces, similar to scratches. Over time, they accumulate more and more, the bowl becomes crawled, literally "attracting" pollution.

Powders with abrasives are very few, so very popular. However, it must be remembered that solid particles spoil the surface of plumbing equipment

If you still want to use cleaning products of this type, you should read the instructions on the bank. Most often, in addition to abrasives in their composition, there is any bleach. Therefore, most manufacturers advise to apply their products in this way.

Powder is applied to a water-laid sponge or directly to the bowl, after which it is intensively rubbed into the surface. Then it follows for a while to leave the tool to effectively "worked." After that, once again threatening with a sponge and rinse with water.

Industrial production tools

This is a large group of different acid-based compositions or alkalis. The first are more efficient, because acid is better coping with the removal of rusty edema and lime plates.

But alkaline tools are well "work" against the organicists, respectively, perfectly decompose the blade and fats. Consider the most demanded compositions.

Gele-shaped "Cillit Bang" for toilet bowls

All drugs manufactured under this brand have a gel consistency. They are packed in vials with a convenient dispenser in the form of a nose, helping to deliver a solution in the most hard-to-reach places.

The main active substance in the composition of the means is hydrochloric acid. Therefore, it is best to use against rusty stains and lime plates. It does not need to forget about the means of protection.

Cleaning products of industrial production are very effective. You need to know that it is impossible to mix them. There may be unpredictable chemical reaction, which is very dangerous

In the line of funds, you can find the compositions of aimed: against rust, for disinfection, for bleaching or gloss, against a difficult lime-plated. Consumers value the high efficiency of the composition, cost-effective consumption and convenient packaging.

Of the shortcomings, the most significant consider the relatively high cost of the drug. But the gel is very easy to use. It must be applied to the bowl, leave for 15-20 minutes, after which it was washed away.

Domasetos for toilet

Under this brand there is a popular multifunctional tool for cleaning toilet bowls and other plumbers. The drug enters the alkali, well coping with the destruction of the organic. For this reason, the means struggling is not very effective with a limescale.

In addition, the tool contains a chlorine bleach, therefore not only whitens rust drums, but also disinfects the surface.

Several varieties of the drug, differing, are mainly discharged. The latter are necessary to drown out the extremely unpleasant smell of chlorine. Consumers highly appreciate the means for high efficiency, thick consistency and economical consumption. Of the disadvantages, a sharp unpleasant odor of the drug is noted.

Domasestos is universal, in a diluted form can be used as a bleach and as a disinfectant for kitchen surfaces. And in the undiluted form, it and other no less effective means can be used for in sewer pipes.

Tool for cleaning "Toilet duckling"

The liquid preparation produced in the vials of the characteristic shape with a strong curved neck, which allows you to apply gel in the most hard-to-reach places. Duckling contains hydrochloric acid, so it perfectly copes with lime sediments and with rust drifts.

Somewhat worse, but also effectively the drug dissolves the blade. The concentration of acid is large enough, therefore the means aggressively with respect to bacteria.

Toilet duckling is a very effective tool based acid. In addition to the universal manufacturer produces narrow-controlled drugs to solve various problems

The preparation has a pronounced disinfect effect. When working with the composition, necessarily the use of protective equipment. Buyers noted the good effectiveness of the drug, convenient packaging, budget value.

The duckling includes derivatives chlorine, despite this it has a pleasant smell. The disadvantages include liquid consistency, which provokes the rapid flow of the drug.

Cleaning pills and cubes

Many hostesses, reflecting how to clean their toilet from the blade, do not take into account numerous tableted cleaners. They are produced by most household chemical manufacturers. This is an effective multifunctional means capable of not only cleaning equipment, but also to disinfect it and deodorize the air in the bathroom.

Cleaning tablets for a tank - a practical multifunctional means, catering directly with the three main problems of plumbing equipment. The composition of such tablets and the concentration of active substances in them varies depending on the manufacturer.

Famous brands produce funds operating within one or two months. The tablet in the water-soluble shell is lowered into the drain tank. Slowly dissolving, it gradually "gives" active substances into the water. As a result, the details of the drain tank are cleaned. After pressing the flush button, the liquid enters the bowl, it is also cleaned from all types of contaminants.

At the same time, active substances fall freely on the most hard-to-reach areas and clean them. Funds can have the most different fragrance, the user chooses any smell like.

Tablets are quite effective, especially if there are no longer pollution. From the disadvantages of the means it is worth noting a fairly rapid flow of the drug, especially if a large number of people enjoy the toilet.

Conclusions and useful video on the topic

With the help of video instructions, we can solve some of the problems associated with pollution of sanitary equipment in the toilet.

If still plumbing has an unsightly kind, you need to determine the nature of pollution and choose the most efficient cleaning agent specifically for them, the benefit of their range is very and very wide.

Are other effective ways to clean the toilet toilet from pollution and you successfully apply them in practice? Please tell us about other visitors to our site in the block with comments. Or have questions about the topic of the article? Specify them, we will deal together.

The content in the purity of the toilet room requires considerable effort and time spending. What if inside the toilet bowl appeared a dirty yellow flare, the so-called blade stone? These are salt acids resulting from a compound of lime deposits and urine, which are connected and seen at the bottom of the toilet. Without additional means of struggle, it is not necessary to do. How to clean the toilet from urinary stone?

The content of the article:
1.
2.
3.

The reasons for the formation of a lime-plating on the toilet

Unfortunately, the yellow raid far does not always talk about the inaccurability of the owners. Even with constant and correct care over time, microcracks appear on the coating of special glazes.

The reasons for the formation of a lime deputy several:

Damage to the glaze on the toilet. Fast wear promotes surface cleaning with metal-based sponges and scratching abrasive means;

Lime deposits are clogged into microcracks, which are formed with regular drain in the toilet of hot water;

Minerals are present in the water. The more water flow out of the tank, the more deposits will appear on the walls of the toilet;

Insufficient watering water after visiting the toilet;

Irregular prevention of laid and stones formation.

Ways to clean the toilet from blade

There are many ways to clean the toilet from urinary stone and pollution, but, of course, the most cheapest, but no less effective are folk remedies. How to use, depends on the degree of contamination of the inner walls of the toilet and the thickness of the urinary stone deposits below, where water is located. It is unlikely that you will get a brilliant result from the first cleaning, but several times you can cope with the most soothed stones.

Effectively clean the toilet is sometimes possible only with the help of acids. Do not try to extort a lime flair with a knife or a sharp object, it is useless and necessarily damages the integrity of the glaze. Be sure to use thick rubber or latex gloves.

Toilet bowls before and after cleaning from blades

Folk remedies

Folk remedies for cleaning the toilet with blades of pollution are cheaper, but no less effective:

White

Popular tool for removing blades. Using vehicle, we remove water from the toilet. Pour a bottle of white on the walls, covering the inner surface. We close the lid and leave for the night. To eliminate chloride evaporation, throw a rag from above.

In the morning, the enshik's hill and we will wash several times. If the stone is soaked, then you will spend such an operation several times. But it is most likely not able to dissolve very old stones.

Vinegar

For cleaning, not very old brown raids can be used by vinegar. Heat in a closed metal container half a bottle of 9% vinegar to 40 degrees. Pour along the walls in the toilet, for a larger effect, the internal surfaces are pre-ranging. Soda is fairly glasses. We leave the mixture for the night, wash it in the morning.

It is necessary to lose the rigid sponge the softened stone. If you have 70% acetic essence, then mix grams 100 with iodine in equal parts and pour overnight.

Lemon acid

It will be possible to effectively clean the toilet from the blade, citric acid will help. Pour two bags into the water toilet bowl, we leave at least 2 hours, and better for the night, we wash clean water, then the contamination with the abrasive sponge or the brush and wash it again. The effect can be strengthened by soda.

The procedure is desirable to repeat several times. The thicker layer of plaque and stone, the more bags you need to pour into the toilet.

Soda

Fresh pollution can be removed using just one of the food soda. It can well cope with the softening of urinary stones. Here the main thing is a long interaction with problematic surfaces. Low on the wet walls and in the water pack of soda, leave overnight. In the morning, wrap the places of contamination and wash the water.

Oxalic acid

Older stones and a long-term limestone flare is better removed by oxalic acid. Technical oxalic acid is sold in small packages. Pour a bit of acid on a wet cloth, and the tritte is the blade. Leave for a couple of hours, pull the brush and then rush.

You can also pour into the toilet bowl of oxalic acid for a short time, maximum per hour. Then sweete and thoroughly rinse with water. Do not forget to wear gloves to work with acids.

HCL

If you have access to hydrochloric acid, you can wipe with all the precautionary stones with all precautions, but only if other methods did not help. After an hour, rinse with several waters.

Car electrolyte

The most cardinal method to clean the toilet from the blade is used in the case when it is a matter of the edge and other methods did not satisfy you. This is cleaning with automotive electrolyte.

In addition to special gloves, protective glasses are needed, and family members are preferably sent to take a walk, because electrolyte pairs are dangerous for respiratory tract. In addition, its application is permissible if you have exclusively metal pipes, including wiring.

Pour the electrolyte in the toilet, close the lid and throw the cellophane from above. After two hours, it was repeatedly rinsed with water toilet and only then open the lid.

Cola

And in this noble business, Coca-Cola can help you. High citric acid content in the drink for a short time rebuild fresh deposits. Fill two liters in the toilet, wait a few hours and polish the brilliance of the brush or rigid sponge.

Cleaning toilet cola

Household chemicals for cleaning toilet bowl from blade

If you trust the household chemicals more, then in the fight against the blade, the best helpers will be the means in which the high concentration of formic or hydrochloric acids. Together with a limescale and urinary stone, such means of household chemicals will cope at the same time with rusty subteps. Means are also effective as part of which sodium salts sulfate or carbonate and anionic surfactants (A-PAV).

All should be applied only according to the instructions in the instructions and must be in gloves that protect you from aggressive acids and components. When choosing a means of household chemicals, it is necessary to take into account the thickness of the liquid.

For cleaning against contamination and blade, manufacturers offer the following effective means:

"Active Discoverity" is a product of Johnson's company and is based on hydrochloric acid. A fairly effective means to remove old pollution.

In the domain line, there is a specially created preparation for removing the blade. For sale "Domestos Pink" in black tank and is not diluted when used. Removes only fresh pollution and stones.

Curved spout "Silita" allows you to apply a means under the bezel on the inner walls of the toilet. In its composition, salt and other potent acids. "Silit" is considered the most effective household chemical way to clean the toilet from the blade.

May be useful to you and "Mr. Muskul" in the granules, which destroys especially old stones. Peluce the most contaminated parts of the toilet three hours. Rock with plenty of water.

When using these cleaning products, it is necessary to remove water from the toilet to the toilet with the vehicle or pulling it completely. Fill the selected tool and leave for four hours.

If the gel-like product is liquid and quickly flows from the inner surfaces of the toilet, periodically pour. Take the rash or a rigid sponge and remove the softened pollution.

Wash several times with water and look at how much the urinary stone was dissolved. If part of the pollution remains, repeat it to its complete disappearance.

Prevention of urinary stone on the toilet

If you do not clean the toilet weekly, then a few years later you have a challenging and exhaustive work on removing lime plates and blade.

There are several rules that allow for a long time without general cleaning your toilet:

Adjust the drain and do not allow water leakage. It is this problem that first leads to the appearance of a limescale. Use tablets for a drain tank.

Wash off with plenty of water;

Keep the toilet clean constant, as it is known that the occurrence of new sediments is accelerated on the roughlined surface:

Weekly wash the toilet with a sponge with the use of cleaning products.

And let you be a reward for your unfortunate work sparkling white, well-kept toilet.

Pure plumbing is an indicator of what is regularly cared for her. The toilet is used often, so the most different pollution accumulates in it. If you cannot delete small deposits in a timely manner, they solidify and get rid of will not be so simple. The main problems encountered when cleaning the toilet bowl is a limestone and a blade.

Causes of the appearance of plaque

The limestone (or aqueous stone) is formed from calcium and magnesium salts, which are contained in water. This is a flare and yellow-orange color divorces that appear in the place of flush, at the bottom of the toilet bowl, under the rim and even on the lid. The more time passes between scheduled cleaning, the thicker layer of sediments and the more difficult to clean them. From the limetal plaque also need to clean or

The blade is the result of the sedimentation of the minerals contained in the urine. If you periodically forget to wash off the water, ugly floors are formed on the walls, and then the gray-yellow stone.

The appearance of deposits also contribute:

rigid water
cracks and irregularities on the surface
leaking tank

Attention! In addition to an inesthetical appearance, a stone in the toilet is a source of unpleasant odor and a favorable environment for bacteria.

Clear the toilet from the lime-plating and blade can be used with the help of healthy agents that will be found in any house. In particularly launched cases, if the toilet of old or cleaning was not carried out for a long time, you will have to resort to aggressive chemistry.

The rules for cleaning toilet bowl

Take care of protection measures. On the hands, it is necessary to dare gloves, and in the case of using caustic substances - put a protective mask in order not to imagine pairs.
Remove water from the toilet bowl, pull out it with a brush or use the can pastuis. Remains absorb the rag. It must be done for better effectiveness of the funds applied.
Apply the selected tool for several hours.
Extermine the deposits with a rigid brush or rash.

Deleting fine and medium raids

Cleaning soda and vinegar

This is a sufficiently strong tool will help remove the middle layer of lime plated and blade.

Heat vinegar to a temperature of 40 degrees. This highlights the caustic smell, be careful!
Add soda: 1 tablespoon on 200 ml of vinegar.
For greater efficiency, add iodine.
Fill the hissing mixture in the toilet so that it covers deposits. Under the rim of the toilet, where the stone also accumulates, laid the toilet paper impregnated with vinegar.
Leave for 8 hours or at night.
Pull the raid by the ram. Inaccessible places can be cleaned with a toothbrush.
Wash the composition of water several times.

Limonic acid can dissolve a thin layer of urinary stone and lime.

For this method, it is not necessary to remove water from plum.
Practice 2-3 acid packets in the toilet and close the lid.
Wait 2-3 hours.
As it should, sweeten the brush and rush with warm water.

If one application is not dissolved for one application, repeat the method 2-3 times and there will be no trace from contamination.

White

Application Simple:

In the toilet without water, pour the bottle.
Close the lid and leave overnight.
Remove with warm water, and then apply the rash.

Soda

To wash the toilet with small pollution will help soda. It is better to use the calcined.

Pour soda into contaminated areas
Leave to act for the whole night
Morning water warm water

Coca Cola

Remove the yellow plaque and rusty divorces can be with the help of coca-cola.

Pour a large gasket bottle into a drain hole
Leave for the night
Clean the brush and wash the water

Means of household chemicals

Powders. The most popular: "Comet", "Pemiolux", "Numbers", "Biolan". Their action is based on the abrasive effect. Some contain chlorine. We simply apply them, but you need to remember that the mechanical impact leaves micro-phase on the faience. Over time, dirt will be clogged in them, so to extend the service life of plumbing, the powders are better not to use.
Liquids. For example, "whiteness", "Sanoks". They are poured into place of pollution and leave for some time for exposure, then wash off.
Gels. Such a form is more convenient for cleaning: due to the more thick consistency, they slowly flow through the walls of the toilet, dripping. The gels are applied under the beet of the toilet, the exposure time is about 30 minutes. Then the rash is applied and the tool is washed off. Hels contain strong acids and alkalis. For example, the "toilet duckling" contains 15% hydrochloric acid, therefore it will be perfectly cope with a stone in the toilet. Domasetos is mainly used for disinfection.
Creams. It acts on the principle of gel, but has even more dense consistency. The cream is applied with a sponge or brush on a contaminated surface, time is given for exposure, then washed off. The most famous - "CIF". Creams are characterized by more economical flow and gentlement to the surface.
Tank tablets. Used for the prevention of lime and blade, and also provide a pleasant smell and purity with each wash. The tablet puts directly into the tank, and with each wash, paints water in a bright color. Transparent water is a signal that you need a new tablet.

Removal of thick laid with strong acids

If no folk and cleaning agents help, strong acids can be applied. These are the extreme measures to be resorted to rarely and strictly observe the exposure time, since such chemistry can freeze enamel and harvest pipes and plastic details.

Oxalic acid

Medium-toxic organic acid. Popular tool for cleaning plumbing during our grandmothers. Provides perfect whiteness and effectively removes stone. Nowadays it can be purchased in construction stores. Before use, carefully read the instructions and put on the gloves from thick rubber.

Mode of application:

On a wet cloth, pour an acid as a powder.
Apply to polluted areas. If you need to clean the drain, dissolve it in water.
Wait 1 hour, during this time the flare is dissolved.
Rinse thoroughly with water using the rash.

It is an inorganic acid of medium power. With the help of it, you can not only clean the toilet from the stone, but remove rust from the inner parts of the tank. The main advantage of this acid is that it does not damage rubber and plastic elements. Mode of application:

Fill into the tank and into the drain hole 100-150 ml of acid
Wait 15 minutes
Rock with plenty of water and clean the brush.

Hydrochloric acid

This is a very strong toxic agent. Instantly remove the stone, but it should be used with marginal caution. Before use, put on protective glasses, respirator and gloves from thick rubber. Pairs of this acid are also dangerous!

Mode of application:

Apply the liquid on the walls and pour the half a cup into the drain hole.
Exposure time - 10 minutes.
Rinse with plenty of water

Attention! This method is not suitable if you have plastic pipes, they will leak from acid damage.

Electrolyte

The battery electrolyte is produced based on sulfuric acid, it is possible to find it in any store for car enthusiasts. This strong and very dangerous remedy greatly dissolves the limestone and the blade. It can only be used in rare cases. The method of application is similar to a method with hydrochloric acid: apply, leave for 10-15 minutes and rinse with water. When applying, observe all security measures, avoid splashing means, as you can get chemical burns.

Prevention measures against lime plating and blade

At least 1 time a week brushing the toilet with special cleaning agents. Frequency of washing depends on the number of people who use plumbing.
After each use, drain the water and, if necessary, apply the rash
Do not allow the tank. To do this, make a timely repair or replacement of drain reinforcement.
Use the soap facilities that are put in the tank or attach to the walls of the toilet. They will help maintain the purity between cleaning and provide a pleasant smell.
Do not drain the remains of oily food into the toilet.
If you acquire a new toilet, choose the maximum smooth product, better from the porcelain. Plumbing porcelain is more expensive than a faience, but at the expense of its dense structure it is smoother. Accordingly, it will be smaller and less often. It is also worth purchasing a product with a two-button drain, which will reduce water consumption.

As you can see, the rules are simple. It is much easier to take care of the plumbing in a timely manner than to delete the "thickets" of stone and plaque on the started product.

Knowing how to properly clean the tank and the toilet from lime sediments and blade, you remove even the most complex sediments, giving the plumbing whiteness and purity. Use soda, vinegar, coca-cola, oxal, citric acid or white. In particularly difficult cases, use the automotive electrolyte or hydrochloric acid, provided that the sewer system is made of metal. Remove water from the bowl to the toilet water, process the surface and leave for 20 minutes (or more, depending on the selected cleaning method). Then you thoroughly sweep the brush and smash, keep water from the tank.

The bathroom is a favorable place for the development of microorganisms. In addition, urinary stone and limetones are postponed inside the toilet, sprouting the appearance of plumbing. Knowing how to clean the toilet, you improve the sanitary conditions and restore the plumbing, but most importantly - approach the procedure competently, because the enamel will irrevocably spoil.

Causes of the appearance of blades and lime plates

When dirt and plaque appears in the toilet, take measures immediately to avoid the appearance of unpleasant odor and accumulation of deposits.

Inside the toilet are formed such types of pollution:

The blade is the result of the laziness and negligence of the owners. Most often, yellow unwashed spots are formed on the plumbing of people forgetting to wash off. Initially, urine drops dry and form a thin splas. With a multiple lack of flushing, a stronger film is formed - the blade. From it you can get rid of only special methods, but it is better to prevent her appearance, conducting prevention.
Lime-based plaque - minerals contained in water (well or river, plumbing). The more often you wash off, the film is actively formed. It is necessary to get rid of necessary regularly, because over time it clogs the holes that feed water into the toilet, which leads to the plumbing to the complete malfunction.

Enameled plumbing is less prone to the formation of a raid, which is not dedicated, but on the rough surfaces it appears more often and intensively.

How to restore whiteness and freshness toilet with folk remedies

If the visit to the toilet has become unpleasant, because inside the stains and unpleasant smell appeared inside, try cleaning the toilet with the brush. If the result did not please you, go to more serious cleaning methods. Folk remedies are well suited for cleaning minor and old sediments in private houses and apartments having a plastic pipe or local sewer / cesspool system.

How to Clean the toilet from a strong lime-plated by vinegar

With long-term exposure, vinegar is able to dissolve the solid spill of the blade and lime, without damaging the surface of the toilet.

To wash the toilet:

Clean the sewer system with water and reset the water from the toilet bowl.
Dry wipe the places requiring processing.
Mock the napkin with vinegar and attach it to the raid.
After 6 hours, wash the toilet and remove the remnants of the plated by a non-metallic scraper.

To enhance the effect, you can use a preheated acetic essence or acetic soda solution (1 tbsp. Acid 1 tsp. Soda). The processing mechanism is the same as when flushing with clean vinegar.

"Mole";
"Mister Muscle";

Draw water from the toilet bowl, pour the tool and smoothed by pressing the button on the tank.

Folk remedies are no less effective: ½ pack of soda pour 1 tbsp. Waters (pre-draw water from the toilet). After 15-20 minutes, pour the kettle of boiling water there, so that the soluble stralls go into the sewer or street cesspool.

If there is a problem than to clean the polluted toilet, use special or folk remedies. To aggressive, like hydrochloric acid and auto electrolyte, resort in extreme cases, because they are dangerous for the drain system.

Larisa, July 6, 2018.

Maintaining cleanliness in the bathroom indoor is a very difficult case for any housewife. The beauty of toilet bowls and baths are depending on both the quality of the applied funds, and on the periodicity of cleaning. One of the common problems is the appearance of an unpleasant plaque on the inside of the toilet. Therefore, many are interested in how to get rid of a limescale in the toilet.

Causes of the appearance of a lime

Flap lime inside the toilet can often appear due to a large amount of magnesium and calcium as part of water from sewage. It appears on the inner walls due to leaks of a drain tank caused by a poorly configured float. This is very important material from which the "porcelain friend" housing is made. In the event that it has a rough and / or porous surface without glazed coating, a variety of pollution will quickly accumulate on the product.

The most optimal option is porcelain plumbing with a smooth surface. Such products are less than the rest are subject to pollution (and outside, and from the inside), but it is much more expensive. But in this case, you can not think about how to remove a lime bloom in the toilet and where to buy quality funds.

In addition to the lime plates, there are a lot of problems with the blade and corrosion. Therefore, many are interested, how to clean the toilet from the blade inside.

Rust is formed due to the presence of ferrous elements in the composition of the water and due to the unsatisfactory state of the pipeline of the sewer system.

Urinarystone, as seen from the name, is a deposit of substances contained in the urine. The problem is due to the fact that human vital products fall on surface roughness and are not eliminated in a timely manner. As a result, remove the yellow blade In the toilet it becomes very difficult.

In order for the struggle with a limescale to be effectiveFirst of all, you need to regularly clean the toilet. However, if the problem has already appeared, it must be immediately solved. In this case, it will be useful to find out how to clean the toilet from the limetal plaque. You can use special preparations or home recipes. It all depends on the financial capabilities and personal preferences.

Home Methods

There are a large number of simple and affordable ways.which allow you to clean the toilet at home:

Radical way

If there are malnutacies in the toilet and no vinegar and citric acid help, then you can use another cleaning solution, which is based on the use of electrolyte. It is important to understand that it is necessary to comply with certain security measures: to acquire a respirator, rubber gloves and glasses to protect. Pour electrolyte on pollution is required as accurately as possible, avoiding splashing. It is due to the fact that evaporation of this substance is very dangerous for the skin and respiratory tract.

Removal of plaque with a soda

It is enough to buy in the store a couple of bottles of "sprite", "pepsy" or "cola" and pour them into the toilet to remove the dirt. After a couple of hours, the active substances contained in these beverages will dissolve lime or blade, and the contamination can be simply removed using a rigid brush or sponge, and the surface is thoroughly washed.

For the prevention of lime plates, experts recommend using special preparations placed in the drain tank. They allow you to maintain cleanliness and hygiene inside the toilet, and also prevent the appearance of unpleasant odor. The principle of action of these substances is based on the change in the composition of water, which fills the tank. When washed with it, various deposits from the inner surfaces of plumbing equipment are leaving together. Today there are many items of this kind of product. The most popular of them includes:

tablets "Domasetos", their average cost - from 100 to 200 rubles;
preparation "Bref" cost from 140 to 180 rubles;
cubes "Chirton" - from 60 to 80 rubles.

Now on sale you can find a lot of funds that allow housewives to maintain purity in the toilet and bathroom. In composition, these drugs can be divided into the following categories:

Powdensums are distinguished from abrasive cleaning products: "Sorti" and "Pemiolux". They cost from 28 to 80 rubles. Such powders are greatly struggling with deposits, but assume the application of some efforts to remove contaminants. In addition, the use of powder preparation makes the surface more rough and causes the appearance of microcracks, in which bacteria and flare can also accumulate. Therefore, it is still better to prefer tools based on a gel or liquid.

Acid agents very effectively remove the sediments of the lime and blade from the inner surface of the toilet.

The results of one of the market research show that the best and most popular tool among Russian housewives is "Cillit Bang" based on hydrochloric acid. However, this drug is quite expensive.

A much more affordable, but no less effective means is the "Domestos". Its value varies from 160 to 280 rubles. It also contains hydrochloric acid, allowing to wash any dirt and sediment. Many consumers speak very well about this tool, considering it an ideal solution for cleaning the toilet bowl.

ATTENTION, only today!