Not only folk craftsmen know how to make exclusive comfortable furniture from well-made materials. The advantage of this classes is obvious - this is the possibility of incarnation into the reality of the most bold ideas for the diversity of residential space. An additional bonus can be noted the low-cost making of homemade soft seats with their own hands. Following the advice of designers, you can make a soft chair for a pleasant pastime in your own home. At home, you can exactly repeat all the stages of the factory manufacturer of this modern and convenient attribute of the design of a children's or living room. On the Internet you can find the simplest, and complex schemes.

The first stage in the manufacture of homemade soft furniture is the choice of fabric for the external design of the soft parts of the structure. Each master selects the upholstery depending on the physical properties and price aspects and features that different drawings possess. Consider the most common fabrics for decorating chairs in our time:

• velur - velvety to the touch, gives furniture a certain charm;

Velor in a fruit

• fLG - a distant analogue of velor, easy to clean, so designers use it for decorating children's upholstered furniture;

Flog in overt

• shenille - a fabric based on the compound of natural and synthetic fibers, has a special wear resistance (the thoughtful structure prevents the formation of coils);

Chintilla in the fruit

• jacquard - the upholstery is considered durable, but over time, the loops turn into tightening;
• natural tapestry - the most expensive and beautiful view of the upholstery fabric;

Jacquard in the fruit

• artificial suede - a universal version for chairs in the sunny room, resistant to UV rays and is easily filled with cleaning;

Artificial suede in a fruit

• the leatherette is a durable material that allows you to play with decorative embossed.

Leatherette in the fruit

Material, Facilities, Tools for a frame attribute

Creating a frame chair from scratch represents some difficulties. But the finished product will have a more respectable look. This can be convinced of this, considering the photo of the finished products of homemade masters. Also for the foundation you can use the old Soviet "Babushkino" chair.

For the manufacture of a simple frame under the chair, you need to pick up the durable sheets of 20-millimeter plywood for cutting parts with your own hands. A standard set of tools for repair with an electric train, an electric bike, steel line, sandpaper, metal rims, painting ribbon, pencil, tape measure, thin nails, screws, joinery, mourn, glossy paint can also be useful. For upholstery, it is necessary: \u200b\u200bartificial leather or fabric, foam rubber (filler).

Phased creation of upholstered furniture with wooden basis

1. If you do not know how to make a drawing for the base, then look for ready-made schema options on the network. As a rule, they are transferred to the cardboard pattern with a pencil. Only then proceed to perform the operations of the above algorithm. This will help to save on excess material, or vice versa - not to buy missing parts.
2. Future components of plywood sheets are cut on the cardboard pattern:

• sidewalls resembling a banana form;
• transverse strips.

It is important to determine the desired angles of inclination, bending and dimensions of the future frame. This will help the photo of the finished chairs created by your scheme.

1. The next step is to process the surface of the wooden parts by stripping and grinding. With special accuracy, workers are worked out to improve the quality of the work done. Previously, these parts are impregnated with a preheated oliff and only then the hammer form bends, if they are provided in the sketch. Each component of the element is filled with an electric jigsaw.
2. Color or processed by varnished sidewalls. The ends of the side parts are strengthened with rims of metal.
3. Further course of action is related to the crashing of the frame. With the use of the electric drills, the desired holes are done. The rims are fixed with screws.
4. Artificial leather or tissue are tightly tightened by the back of the back, then the remaining fragments of the structure, incl. and seats.
5. The upholstery material is fixed by bulk nails for which large caps are characteristic. In the back of the frame armchair, the upholstery is fixed along the edge, along the transverse parts for better covering of the planks.

Pattern of Round Chair Wooden Frame We are wearing a frame of cardboard Fiberboard

Experienced furniture makers advise attachment places to additionally treat carbon black glue. Such a move is needed to increase the durability of the furniture created by their own hands.

Secrets of reliable upholstery: how to sew

The process of stretching upholstery of soft seats has its own nuances:

1. Foam rubber cut (average thickness - 5 cm). The part is glued to the surface of the plywood sheet.
2. Horizontal and vertical tissue straps are fixed on the back of a construction stapler. Similar belts are added to armrests and sidewalls from the inside through the form.
3. From a piece of foam rubber 0.1 cm thick cut off the part, which in size will be larger than the surrounding area (the difference is 4-5 cm). Take the flap of the synthetic tissue of a similar size with an elongated front and fasten with their own hands.
4. After done manipulations, the upholstery are covered with furniture cloth. Using a stapler, textiles are fixed in all corners of the case, a synthetone-foam layer to the frame of the seat seat.
5. The sidewalls and armrests also cover with syntheps, fastening with aerosol glue over the entire surface. Only after that the details are squeezed by a cloth, fixing the flap along the bracket.

We are cutting the chair to the foam rubber additionally put a sintepon

5964 0 0

How to make a chair with your own hands from a tree: drawings and sizes, plus assembly instructions and explanations for working with lumber

For a comfortable stay at the country, you need a comfortable chair. However, the same furniture is needed in the apartment. A good chair is easy to buy, however, it will cost it somehow, but you can save money and assemble it from the tree yourself. In this article, you will find a simple instruction managing a wooden chair, and in addition, learn the rules for working with lumber.

Tree as the main material

Decided to make a chair and do not know what materials for this use? The best material is a tree, namely, boards, timber, furniture shield and other alloyous timber. There are several reasons for the assembly of wood furniture and among them:

• Easy wood processing. Working with a tree is easier than with other materials, from which the furniture is taken. Again, to work with the tree there will be enough tools that are in most domestic workshops;
• Affordable price. Boards, timber and other lumber are still inexpensive with how many of them will be needed for the manufacture of one chairs. Moreover, lumber can not be bought new, because there are used pallets;
• Excellent appearance of wooden furniture. Wood texture is distinguished by a beautiful pattern of fibers, which will certainly decorate the chair you collected, provided that you cover it with a transparent varnish;
• Durability. Communrable furniture by degree of reliability exceeds furniture collected from plywood or stoves. With the right operation, the chair made of wood will serve at least ten years.

What breed of wood is preferable? For the assembly of furniture, I recommend lumber from hardwood wood: aspen, linden, birch and fruit trees. The coniferous wood is knocked out and resinous, which will complicate the cutting of materials and the finishing finish of the finished product.

Select model

Now that you know from which materials to make a chair, it remains to decide on a suitable model. I propose a brief overview of popular options.

Conventional armchairs with armrests - In essence, it is chairs, but more massive and more comfortable
http://4authors.seoerp.ru/files/tinymce/img5b539aef94abb2.09760471

Chair for dacha

Illustrations	Furniture options for cottage arrangement
	From pallets. This is the best option in terms of simplicity of assembling and low cost of materials. Again, with a competent approach to the assembly process, the finished products will look modern and stylish.
	Shell. Despite the complexity of the design, such an armchair looks great and provides the greatest comfort in comparison with other models. The only drawback of this option is the need to bending a lot of wooden parts.
	From the bay from the electrical cable. The bay from the cable with a backing board is furniture, which is not only cheap, but is also quickly manufactured. Make such a chair will even easier than from the pallets. In addition, from the bay, thanks to its rounded sidewalls, you can make a rocking chair.

Set of standard self-taught furniture maker

Before proceeding with the manufacture of a chair, I will comment on those questions that are most often asked self-taught furniture makers.

How to cut? For longitudinal cutting, we use a circular saw, for transverse and curvilinear cuts we use an electrolovka or hacksaw.

What to fasten wooden parts? In the design of the chairs there are strongly and slightly loaded connections. For tight connections, use bolts with washers and nuts. For low-loaded compounds, we use wooden wickers or furniture config terms.

To paint or vapor? The choice of LKM depends on the quality of sawn timber. If wood does not have visible vices, it can be toned with a verse and coat with a transparent varnish. If there are pigment stains on the surface, or it was necessary to eliminate the defects with a putty, the part is preferably covered with a soil and solid paint layer.

How to reduce the flow rate of the LKM? It was noted that with the finishing of the chair, the paint materials absorbed into the surface and remain untreated places? The problem is that lumber have a porous structure in order to reduce their absorbency absorption capacity, pre-applying primer or olifa.

Why do cracks appear? Often, beginner masters, making furniture from the tree, the appearance of cracks is detected over time. The reason for the cracking of sawn timber is a non-uniform sweep. Solving Problem Use Initially dry wood.

Preparation for work

At the preparatory stage, choose the right drawing, we harvest the materials and prepare the tool.

As a material, I propose to use not new purchased boards, but wooden pallets. One dacha chair will leave one and a half pallet. Given that used pallets are sold by about 300 rubles, the price of the assembled furniture will be low.

Now choose the drawing. The diagram shows dimensions focused under the structure of a man of medium height. If this is the need for dimensions can be revised towards increasing or decreasing.

This drawing shows several armchairs projections, namely, top view, front and side. Immediately shows the location of fastening hardware that ensure the reliable connection.

The process of making a chair with your own hands: Step-by-step instructions

I propose a step-by-step assembly instruction. To make it easier to repeat the listed steps, the instruction is decorated as a photo report. Stages are listed in the sequence in which these works must be performed.

Every day, designers come up with unusual furniture, sometimes practical, and sometimes not very. She looks beautiful, but not everyone in his pocket. Round chairs and eggs have come up for a long time, but they still have not come out of fashion due to interesting appearance, practicality and convenience. Let's try to create such an unusual chair with your own hands.

To begin with, we will make a small round chair that is suitable for a child or a homemade pet. If you are confident in your skill, you can immediately make a big armchair, in which an adult can fit.

Materials:

• big Ball for Fitness
• newspapers
• plastic trumpet
• threaded stud diameter 16 mm
• several nuts under the heel
• cap nut
• shpaklevka
• sandpaper
• 6 white matte paint splashes
• 2 white epoxy paint spray
• thorough 4 cm thick
• red fabric
• 1 Clean-Spray Caller
• roulette

How to make a round chair do it yourself

Papier mache

1. Take a big ball for fitness. The ball is advisable to take unnecessary, since after the project it will have to be thrown away.

2. Stick the scotch around the ball to determine the borders of the papier-mache. Scotch must be glued, a slightly shocking from the central section.

3. Narvit the strips from newspapers. The width of the strip is about 4 cm. Strips do not have to be the same, smooth and neat. The main thing is not to make them too wide that they do not frown with pasting.

4. Prepare a shitter for papier-mache. Mix two glasses of water with a glass of flour and add a pinch of salt. Salt is needed so that the mold does not appear in the flour. Claystaire consistency should resemble yogurt. Do not immediately make a lot of alert, it needs to be prepared as you use.

5. Put the ball for fitness into a big bowl so that he does not ride around the room until you glue on it.

6. Apply Clauster on both sides of each strip, take them to the ball in parallel to each other. On top of them, get another layer of strips perpendicular first.

7. When you cover the entire ball (up to scotch) with two layers of paper strips, let it dry for 12 hours. Repeat the 6th item at least five times (if the chair is intended for the animal). Ideally, you need to apply at least 10 double layers of papier-mache. After each layer, you need to leave the product to dry by 12 hours.

The base of the armchair

1. Drink a circle from MDF. The diameter of the base depends on the size of the chair. We drank a circle with a diameter of 40 cm.

2. In the center of the circle, drill the hole. The diameter of the opening must match the size of the nut. Insert the nut into the hole and screw the threaded pin into it.

3. Install on the base plastic pipe. By changing the length of the pipe, you can adjust the height of the chair.

4. Using Scotch and newspapers, make a smooth transition from the bottom to the pipe.

5. Puck the resulting papier-mache form.

Shpaklevka

The chair takes shape. At this stage, you may have a temptation to pull out the ball to look at the result, but it is impossible to do this. First you need to put a putty to the surface.

1. Put the gloves and evenly apply to the surface of the chair and the legs putty. The thickness of the layer should be approximately 5 mm. Give putty to dry during the day.

2. Pull out the ball. To do this, you will have to blow it away. Now you can put a putty on the inner surface. The inner layer can be much thicker outdoor. Do not worry if the putty from the outdoor will begin to crack. Leave the chair to dry for a day.

Grinding

1. Start grinding with large sandpaper. The inner surface is not necessary to grind, as it will not be visible under the upholstery. During grinding, emptiness can be revealed, do not pay attention to them, your task is to achieve a correct smooth form. Voids you fill out later.

2. Fill the emptiness putty, let it dry.

3. Collect the surface of the chair and the legs of shallow emery paper.

Painting

1. Cover the chair of white paint. It is advisable to use matte paint in the cans. Apply so many words of paint as you consider it necessary.

2. The paint must dry for 24 hours.

3. Apply epoxy paint. It will secure white paint, give the product gloss.

4. Give the paint time to dry.

Installation legs

1. Drill the through hole in the chair where you want to install the leg. The diameter of the opening must correspond to the diameter of the threaded stud.

2. Set the base with the threaded stud on the chair, mark, in which place the pin to spill.

3. Spile the stud until the desired size. Secure the leg on the chair.

Installation of foam rubber

1. Take a roulette and measure the length of the circle of the "opening" of the chair. Exercise the resulting length by 5. On the strip of the foam rubber five times, set aside the resulting length. On postponed points, build five ineffective triangles. The height of triangles is 1 meter.

2. Cut the triangles and spread them inside the chair. Their vertices should come into contact. Between the triangles are formed gaps in the form of petals. Take a sheet of paper and transfer a blank outline to it.

3. Spell five "petals" from the foam rubber.

4. Sew "petals" to triangles, as a result you will have a spherical face upholstery.

5. Although it sounds strange, but this workpiece must be cut into five parts. Cuts must pass along the axes of "petals".

Upholstery

1. Explore the five foam billets obtained at the previous stage, on bright fabric. Fight them along the contour, then mark the external contours, leaving 5 centimeters of stock. Cut the cloth on the markup.

2. Make sure that the foam rubber is laid out correctly. Seams on the foam rubber should be on the reverse side.

3. Apply glue to the edge of the foam rubber and glue the tissue upholstery.

4. Apply glue to the upper half of the foam rubber and glue the fabric. Treat the remaining part with the rest, attach and scream up the upholstery. The glue should be applied not to the fabric, but on the foam rubber, otherwise white spots will remain on the upholstery.

5. Turn over the billet to the foam rubber up. Apply glue to the allowance and wrap fabric. Try to the edges to get smooth and without folds.

Fabric Oracle

1. Apply glue to the inner surface of the chair. Place the foam billets starting from the bottom.

2. Measure the circle of the opening of the chair. Cut the rope of the corresponding length.

3. Cut the tissue strip and wrap to her rope as possible.

4. Sew the edge of the tissue strip.

5. Cut the excess fabric. Stick the ruff over the perimeter of the opening so that there is no seam.

Armchair is ready! Use with pleasure and surprise guests.

Chair with your own hands for the house is able to make anyone. It will only be necessary to purchase some materials and spend a few hours of free time. It is also important to prepare accurate drawings, work schemes, and beginners will help the master class on how to make a chair with their own hands.

When creating furniture, feel free to show fantasy. Even at home can be made of the most simple products original, unique elements of the interior.

Cast species and general instructions for creating

Regardless of which drawings are used, there is a certain algorithm how to make a chair. First, individual details of the furniture object are created, then they are processed - they are made in them under fastenings, lcm are applied. After that, the product is going to one whole. In some cases, painting and opening with varnish is performed after the manufacture of the chair approached the end, that is, a solid, assembled product is being processed.

Before making a chair, you need to decide on its type. Furniture items can be divided into:

• Solid. Do not have upholstery. In fact, pose chairs with armrests.
• Semi-mug. Upholstery with filler fitted on the seat, back, armrests. This allows you to save materials.
• Soft. The soft armchair is fully upholstered with a filler. This is the best solution for the house, which will allow comfortable to relax.
• Rocking chairs.

The easiest option: Create a solid chair

For those who have never done the chairs with their own hands, it is worth first to pay attention to the drawings and instructions for creating solids, without upholstery. If necessary, they can be supplemented with soft elements. Such products are distinguished by the fact that they are light, they are not so afraid of moisture, so it is well suited not only for the house, but also for the country area.

The subject of the interior can be made of submitted materials (for example, pallets) or wood. In the first case, ready-made details are used that should simply process collect on the finished product.

Drawings or a master class for performing a product from undergraduate materials are not required. The homemade chair from the pallets is created according to the following algorithm:

1. Preparation of materials. If the pallets are old, it is better to disassemble and perform a number of actions.
   • Reloce from old nails. Rusty hardware do not just spoil the appearance, but are very dangerous if they hurt them.
   • Sand. Only so you can give an old, contaminated tree aesthetically attractive appearance.
   • Collect anew.
2. Connect several pallets into one. The seat height is selected arbitrarily depending on the wishes. Standard distance from the ground to the seat - 300-400 mm. If the product is intended for children, you can make it lower.
3. Painting and autopsy varnish. This procedure can be performed before assembly.

As a result, it turns out a sturdy homemade chair, which will fit into the general view of the country area or apartments in the loft style.

Wooden chair

High chair drawings:

The following materials and tools will be needed:

• Boards and beams. It is important that the wood is joinery - there was no more than 10-25% humidity. From building materials, it is impossible to create a framework for furniture. Drying wood is a very long and technologically complex process.
• Hardware - self-tapping screws, screws, nuts, washers.
• Furniture conductor.
• Saw or electrolovka.
• Kiyanka.
• Car glue or pva.

Product creation algorithm is described above: First, all parts are cut and processed (the drawing displays the necessary sizes), after which they are fastened with each other. Here are some important points that it is worth considering:

• You can fasten the details with the help of a wanking. To do this, in places of fastening, the holes of this diameter are made so that the connecting element entered them tight. For greater strength, each hole is processed with glue.
• When bonding with self-draws, it is recommended to pre-drill small holes - so they will be easier to go.
• This product can be used as a frame to create a soft chair. You can cover it with a foam and a dense cloth or make individual pillows with ribbon for fastening on the seat, back and armrests.

The rocking chair is created by the same algorithm as other products. The most difficult task is to make a round base. In principle, it can be cut, but for this you will need a very thick board or beam.

Such can not always be found. Any master class on this topic provides a more professional decision - to bring the prepared part. To do this, it must be softened using one of the ways:

• Disappear in the box. A special box of plywood is created. It makes holes for launching steam and several small holes for its exit. Details are put inside, and water vapor is served (you can use the kettle).
• Turn in ammonia. Work should be performed in gloves and in a well-ventilated room.

After the material became soft, it needs to be taken. For this, special machines are either used, or use a simple design: they put two supports at a distance, slightly smaller the lengths of the parts, they set the product on them and in its middle put a cargo. Radius of witch depends on the mass of cargo and the height of the supports.

The product from the metal can be both an independent piece of furniture, and provide a frame for making a soft chair. Metal armchair is very durable and durable, suitable for installation of the house or in the country area.

The master class of creating a metal armchair is practically no different from the instructions for performing wood products. Just for the parts of the parts uses welding or hardware.

Metal frame is also made in a round pendant chair (chair-hammock). Woven seat can be performed from the vine, rattan or other material. If you wish to make a soft round chair, you can put a foam rubber with a cloth or make pillows separately.

The idea of \u200b\u200bmaking a children's soft chair with their own hands has a number of advantages. The main one is the ability to save well. Homemade furniture costs several times cheaper than purchased products. With independent manufacture of interior items, you can choose the optimal design, size and color of the final product.

Similar articles:

Children's room

The room for a child must be spacious enough for games, placing cabinets, tables and stools, toys and other accessories. And the main thing is a convenient and functional place to relax. The installation of the bed is not always justified, especially in small rooms. Frameworks also do not always meet aspects of security. In such cases, parents think about how to make a children's bed that can be transformed into a chair. This is a solid task, solved without attracting specialists.

Thanks to the creative approach, you can make a safe upholstered furniture that the child can move independently, disassemble and collect.

Frameless armchair capable of changing the form

Such products are a few bonded pillows. These interior elements have many advantages.

They are as follows:

1. A light weight. For the manufacture of transforming furniture, the timber, plywood and severe pressed plates are not used. The chair without effort is rearranged to a new place when there is a need.
2. Safety. The accessory does not have solid surfaces and sharp corners, which children can hit. In the unfolded state, the height of the soft part above the floor does not exceed 20 cm - the child's drop in a dream will not cause him any discomfort.
3. Presentability. Properly made and tastefully decorated furniture looks beautiful and representative, organically fitting in the interior.

Folding armchair without a frame just to maintain and repair. It is easily disassembled into components that can be quickly replaced or updated.

What you need

Before starting work, it will be necessary to conduct a survey of the premises and make a scheme. You need to measure the size of free niches and the area you can take furniture. If you make a few identical objects, then you can collect a sofa or a corner for the joint pastime of the family or the child's friends.

To make a children's chair with their own hands, you will need to accurately calculate the need for materials. It is advisable not to save on the fabric and make all the pillows of the same color on both sides. So the furniture will look much better in the unfolded form.

Calculate the pattern of the frameless armchair can be using paper copies of each pillow and pigeon on the scale. Sliced \u200b\u200brectangles are superimposed on the layout of the tissue roll layer so that less waste has been obtained. Separately, it is advisable to add a stock of matter for replacement in case of damage to the product.

For the manufacture of armchairs, you need such materials:

• porpówlone plates with a thickness of 10 cm;
• upholstery fabric;
• inexpensive sieve;
• 2 cm wide braid and 5 cm;
• threads;
• detachable lightning;
• decor elements;
• synthetic glue.

The tools that are needed for the manufacture of a chair:

• sewing machine;
• portnovo meter;
• roulette;
• scissors;
• stationery knife;
• marker or pencil.

Since the foam rubber will have to cut a sharp knife, then the floor covering at the time of work is recommended to be protected. This uses plywood or a piece of old linoleum.

Order of sewing

For the manufacture of soft folding furniture, it is necessary to have a sufficient stock of needles and threads.

Sewing covers is performed in such a sequence:

1. On the floor is a strip of matter. If there is such an opportunity, it is better to firmly fix in the corners in the stretched state.
2. Patterns are transferred to the fabric. It is advisable to place templates on the same line to receive several billets with one incision. Details of patterns are made well visible. On the involving side is applied to the part markings.
3. Checking the correctness of the markup. After that, matterium is cut with scissors. Surplus are cleaned, and the blanks are folded into the stacks.
4. The edge of the edges of the billets overlock is performed. Covers are stitched, lightning and wide braid are tested.

To enhance the edges of the pillows and give the correct shape, in the corners of the covers, it is a narrow braid.

Similarly, sews the bag with their own hands. Since it has rounded shapes, then the seams can not be strengthened.

Flipping filler

For a pear product, an inner case made of tight fabric is made. It is necessary to hold small fragments and dust. A foam, polyethylene or polyvinyl chloride can be used as a filler. All these materials are environmentally safe and sold in the construction markets.

To fill the case, 0.3-0.5 m³ of material is required. To accurately calculate the need, it is necessary to multiply half the length of the rounded part to the width and depth of the base. Purchase balls is recommended with a reserve of 20-30% to add them to the case as the filler shrinkages. Failure is carried out using a scoop, completeness is determined by the experimental way. Receiver of work is a child. After filling the internal reservoir, it is fastened with a zipper, an external case is tensioning on top.

Children's armchair

The manufacture of chairs and chairs from the foam rubber, polyurethane foam and mattresses is an excellent and profitable way to dispose of old things. Old beds, cabinets and sofas are used as starting materials. Their composite parts go on billets for frames, sidewalls, armrests and niches for things.

Tools and materials

To make folding upholstered furniture, you will need:

• roulette;
• hacksaw;
• corolnic;
• electric drill;
• screwdriver;
• spanners;
• sandpaper;
• pVA glue;
• sewing machine;
• line;
• marker.

If the sofa is on the disassembly, then the folding mechanism, corners, bolts and nuts are used.

What do you do with old furniture?