Self-models that will be useful in the farm. Creative homemade housekeepings made by hand. For which the old washing machine can be useful in the subsidiary farm

The summer cottage is the territory where it is possible to give itself freedom to carry out numerous experiments and torturing. This is manifested not only in the interior design, but mainly in the design of the garden or the garden. The inventive and ingenious hosts are not long been guided by expensive and standard methods for the arrangement of their sites, since there is a lot of alternative solutions in fact for all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Non-standard designs are an excellent opportunity to create an interesting garden design, garden, cottage plot.

This variety of beds in most cases is used to grow decorative plants or spicy herbs.

Materials for manufacture:

The length of the drainage tubes is regulated in accordance with the wishes of the landlord. However, it should not be made bulky beds, because they may complicate movement on the territory.

Creating a garden

Stage 1. Create a container. To do this, we take the drainage pipe, cut down along and put on two sides with special plugs.

Stage 2. We take prepared metal holders, put them on the resulting carcasters for the beds.

Stage 3. We do in the pipe hole. They are made in those places where metal fasteners will be.

Stage 4. Delighted through the cable holes made or durable rope.

Stage 5. Fix the cable / rope with fasteners.

Step 6. Fill out the seeds obtained by clay and soil.

Stage 7. Look at the garden beds.

Stage 8. Let the pipes to the selected place. Sometimes there is a special wooden crossbar for this, or rather the design in the form of the letter "P".

Stage 9. Alternatively, you can make a special design for pipes.

Important! The gardening from the drainage tubes is not distinguished by resistant to a strong impetuous wind, so it should be selected for it, which is not blown away from four sides by the winds. Otherwise, the frame quickly collapses, with all your efforts.

The garden, made of a plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting outwardly. You can make such a bed in a couple of hours.

Materials for manufacture:

durable polyethylene film;
sewing machine;
priming;
seedling.

In order for the garden to turn out to be strong, it is recommended to pay special attention to the thickness of the polyethylene film, which in this case will act as "frame" design. The minimum film thickness is 0, 2 millimeters.

The process of creating a polyethylene bed

Step 1 . Cutting 2 rectangular segments of the film, the size of which corresponds to the size of the generated bed. For each side, you should leave the allowance equal to one and a half centimeters. The recommended bed diameter is twenty centimeters.

Step 2. We cross the rectangles among themselves, leaving unconceded only the top of the bag.

Step 3. Send a handle to the future bed, the strength of which will allow to withstand the weight of the bag filled with soil. It should also be considered that when watering the weight will increase.

Step 4. Fill the bag of fertilous land.

Step 5. Make horizontal cuts on a bag in twenty centimeters. They are needed in order to plant seedlings in bed.

Step 6. Space seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple actions, you can get cheap and useful beds.

An integral element of each country area is a compost pile. This is a place where all sorts of biochemical reactions occur, providing fertilizer creation.

To create fertilizers that will satisfy all requirements for them, you should thoroughly consider several key steps: creating a container and directly correctly manufacturing the most compost. We will tell about each of them.

Stage 1. We take eight reference columns of the same length.

Stage 2. Processing the bottom of the wooden columns by motor oil or tar.

Stage 3. Drop the columns to the ground so that they are reliable and stable. If the compost box is located next to the fence, then 4 columns (that is, one side) you can attach to the fence. This will avoid the need to dig 4 yams.

Stage 4. Between each two neighboring columns you feed the crossbars in such a way that in the end it turned out three independent sections. Be sure to leave the slots that will perform the functions for ventilation holes.

Stage 5. In two sections, horizontally nail the boards up to half the pillars height. In these places it is assumed to create two small doors.

Stage 6. The remaining section will be a large door, so you should navigate only one board. It should be located at the very bottom in a horizontal position, that is, as ordinary crossbar.

Step 7. Install the covers. To do this, you can use one large one-piece board.

Stage 8. Install the workpieces prepared in advance.

Stage 9. We provide doors with handles and leaks.

Stage 10. We process wood using special impregnations.

Stage 11. Color the box in any color that matches preferences.

Many gardeners mistakenly believe that any components can be hung in a compost bunch. In reality, "ingredients" should be carefully chosen to create the right biotrement.

Among the required components of the compost heap, the following components:

peat;
ash;
needles;
tree branches;
leaves;
hay or grass;
wood ash;
roots of plants;
raw vegetables and fruits, etc.

All items in randomly mixed in a heap. To accelerate chemical reactions, it is recommended to cover a bunch of tarpaulos (this is especially true in the absence of a box).

A trip to the cottage with the family suggests the presence of entertainment elements on the site that will delight children. The most common way to take young dachensons are swing.

To build a swing on your own - the task is not easy, but quite perfect. Of course, you can always take a stick, tie it with a rope and hang the design on a tree, but it is difficult to call full swings. Real craftsmen prefer to build comfortable designs with a comfortable seat for seating.

Constructive components:

two logs;
durable rope.

Indicators:

log diameter - 85 mm;
length logs - 700 mm;
distance between ropes - 500 mm.

Creating a swing

Stage 1. Extend the ropes between the logs.

Stage 2. Watch the ropes each log.

Stage 3. We release the rope out.

Stage 4. Tighten the ropes on 3 nodes.

Stage 5. Fix the swing on the tree.

Important: Such swings are calculated only per person.

Garden Material Garden

There are several types of garden tracks that can easily be done with their own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Will withdraw the space with corrugated stripes.

Step 4. Color the paint path.

Step 5. Sprinkle a stone crumb.

This is an economical option for those who do not want to break their heads and spend time on a full-fledged garden path. The tire track is usually used for gardens, as it is easily fit into the ground.

Stage 1. Drag the plugs in different colors.

Stage 2. Dump a small trench.

Stage 3. Drive support to strengthen the future track.

Stage 4. Construct formwork using boards.

Stage 5. Install the struts on the edges of the trench.

Stage 6. We put in the ridge of the trench crushed stone and carefully tamper.

Stage 7. We make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press the traffic jams in an arbitrary order. It is interesting to watch even colorful stripes.

These are the most simple and rapid ways to make a garden track, not acquiring expensive materials.

Tools do it yourself

The expression "in the farm will use everything" turns out to be more relevant when it comes to canices. From this plastic container, you can make a large number of indispensable tools that are actively used in the process of dacha.

For the manufacture of this tool, we need only a sharp knife and directly container.

Stage 1. Cut the bottom of the canister.

Stage 2. We note on the container the cut line for the scoop so that the knob from the canister is a handle of the future tool.

Stage 3. Cut off the extra material.

Due to these simple actions, we get a great scoop with a comfortable handle.

Materials:

Manufacture

Stage 1. Carefully my canister so that there is no smell in it.

Stage 2. Cut the vertically to the canister into two parts.

Stage 3. On the table, we make a groove using a woodworking machine.

Stage 4. We apply glue to the Faneur and insert the canister into the lower part.

Stage 5. Color the resulting shelf with a canister.

Of course, such a design will not withstand greater weight, but it is quite good to store small parts.

Materials:

40 kanisters;
scissors;
rope;
paper;
marker.

Stage 1. I pierce the top of the canister.

Stage 2. We make stencils from paper.

Stage 3. Apply it to the canister, we supply the marker.

Stage 4. Cut large holes with scissors.

Stage 5. We fold the prepared canisters into several rows, taking each row by waying the rope under the tank handle.

Stage 6. We reinstall all the rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to lean to the wall, then weiss it to the surface.

Stage 8. We put heavy items in the lower row - stones or bricks.

The result is quite a spacious and functional rack that will help get rid of the question of storing many small details.

Be destroyed and bold in the incarnation of your ideas. Good luck!

Video - homemade for giving with their own hands

Video - do ourselves for giving

Make your home much more comfortable crafts made from old items and things that can be returned to the second life. Some manufactured homemade housekeepings can significantly save home budget, facilitate work or make the surrounding interior more interesting. And even if difficulties arise in the process, their overcoming will cost.

Homemade homemade workshop

Almost in any house there will always be any set of instruments necessary for the economy. But sometimes there are situations when to work in your own workshop or garage requires any device, which is no longer possible to purchase in the store or it is very expensive. In this case, the output can be found by making it yourself.

Blacksmith Mountain from Callon

This metal heating device will become an indispensable assistant in a home workshop. Mountains can be safely used to make original items using artistic forging. It will be truly unique forged items.

For the mining, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut by a grinder, and the door of the mountain and its rear will be made of the cut-off pieces. The inner part of the balloon is covered with a refractory ceramic wool, which is capable of withstanding the temperature of more than 1200 0 C. From above, it is cooked chamotte clay (fuled), withstanding temperatures up to 1500 0 C. On the bottom of the mountain after a lining, chamotte slabs or refractory bricks are stacked.

The hole is drilled on top and a small slight is inserted, which allows inserting a nozzle of a burner burner, which can create in a mountain temperature more than 1000 0 C - is quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane-beam

In the manufacture of such a lift, cash spending will be much less than buying a factory model. For its manufacture, you will have to spend only on materials, half of which may be found in the garage.

Materials required for lift assembly:

Two racks - profile pipe 100x100x2350.
Transverse rod - steel pipe arbitrary length with a diameter of 100 mm.
Four rod supports - profile pipe 100x100x600.
Base and discontroll - a corner with shelves of 100 mm.
Two metal rollers for cable.
Four wheels for movement.

For the lifting mechanism, it is best to use a manual winch with a worm transmission with a maximum load of up to 500 kg, which is attached to one of the stracks of the crane-beam.

The design does not take up much space in the workshop, easily moves through solid coating and is quite convenient for removing the engine from the car.

Mobile instrumental stellage

The main highlight of this rack is its small amountBut at the same time it can accommodate a large number of tools, and if it is necessary to - quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when maintaining construction and repair work in large rooms, especially when you often transfer tools.

The rack can be collected on the basis of a collapsible rack of plastic installed on a homemade platform with wheels (trolley). The platform is made clearly under the size of the rack of a metal corner with the shelves of 45x45 mm or a plywood sheet with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

To the rack additionally you can make and fasten fastenings for building levels, extension cords and other tools that can be stored in a hanging position.

To help hostess

There is no financial opportunity to buy, for example, any of the new furniture in the furniture salon or make an order for its manufacture. But you can always get out of this situation, making the right thing with your own hands, while making it attractive and unique, using remedies for this.

Kitchen Apron from traffic jams

The kitchen apron is a wall surface between the worktop and mounted cabinets. Usually this part of the wall is facing tiled tiles. But for its coverage it is possible to apply many other materials, for example, gluing wine plugs on the wall.

Such an exclusive decor looks pretty great.

Before the sticker, each plug is cut along a length of two halves with a sharp stationery knife. The wall is preferably painted in black, which will emphasize the seams between the corks.

The plugs are glued onto the wall using liquid nails in a chess order either with a specific pattern, as ideally exactly it is unlikely to lay them out, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but quickly dumps and are poorly laundered, so it is best to close them with a glass screen from a calene glass. True, it will have to spend a little to spend a little and order glass in a special workshop, where they will cut it on the specified size and make holes for sockets and fasteners.

Glass fixes to the wall anchor dowelsthat can be purchased almost in any construction store.

Although the apron, decorated with wine stoppers, may be expensive, but the result achieved will cost this.

The surface of the table top, as well as the wall, you can decorate traffic jams and cover with rotable glass.

Hinged folding table

The folding table attached to the wall allows you to save some square in the apartment. In the crowded state, it can perform from the wall at a distance of no more than 10 cm and does not interfere with anyone, but in the unfolded form it can replace a full-fledged table.

Options where you can use a hinge table fixed to the wall, a lot. Here are just a few of the most basic:

Shower for dacha

Probably nothing is better than refreshing under the jet of water hot summer day, especially if he passed the work in the garden. Naturally, only the souls will solve this problem and remove fatigue accumulated in the day.

The shower can be installed on their own without attracting assistance, the main thing is to choose the place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showerwho can freely build on their own:

Installing a simple shower is made in this way:

A frame of a shower cabin is manufactured, which can be assembled from metal, wooden bars or other girlfriends.
A metallic or plastic water container is installed on the roof of the collected frame, which can be from 50 to 200 liters.
Metal capacity is desirable to paint black for better water warming up. Additionally, several heating electric tanks can be installed in the container, then the shower can be taken in cloudy weather.

Cabinet can be seen by boards, plywood, slate or simply cover with tarpaulo or cellophane film with folding pads.

For construction on their own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who does it wants to end it with minimal financial costs. Therefore, if you want to save, you can make some materials for construction to make on our own. For example, it may be a wall sip-panel or such a useful tool like vibratinglitis, the need to which often occurs in many landlord owners.

Homemade sip panels

For their manufacture, you need to prepare a flat rigid platform. Putting a sheet with a thickness of a thickness of 10-12 mm rubber spatula with a thickness with a thinker with a rubber with teeth on it.

Then to glue the sheets of foam of the brand 25-30. After that, on top of the stacked foam, the adhesive mass is applied to the bottom slab, and the second sheet of OSP is stacked on top.

If simultaneously is made by several stacks stacks, work should be performed quickly until the glue is freezing. Usually in this way you can prepare for more than 4-5 panels at a time.

After the workpiece for the formed plates you need to create pressure using the press. Since at home, naturally, there is no hydraulic press, it can be replaced with a thick plywood sheet laid on the prepared sip-plates throughout the plane and twisted for 2-3 hours, for example, several bags with cement, sand or other cargo. You can take advantage of even a passenger car, having stopped on a plywood sheet according to a pre-made overpack.

After the glue is finally dried, the homemade panels will be ready, they can be folded into a separate stack and begin in the workpiece of new panels. Made panels should be left without cargo still, after which they can be used for their intended purpose.

Production of vibratinglitis

To make homemade vibrating plates, you will need to cook:

Electric engine with an eccentric of the brand IV-98E, which is the main part of the vibrating plates.
Steel sheet, a thickness of at least 8 mm in size 450х800 mm. It can be ordered on any metal bondage.
Two slices of chapellery long no more than 400 mm.
Inch tube for handle and two rubber bushings for its attachment.
From the tools you will need a device for welding, Bulgarian and a set of wrench keys.

From the narrow sides of the plate, retreating from the edges of 80-100 mm, make an incision with a grinder about a depth of about 5 mm. After that, get the edges in the direction of the outbreak at an angle of about 25 0 and weld them. The bend is needed so that the vibratinglitis does not immersed in the material that seal it and fluently moved along its surface.

Then across the plate at a certain distance designed to fasten the electric motor, two channels are welded with shelves down. Through pre-drilled holes in a channel, with the help of M10 bolts, an electrovibrator is attached to them.

The handle made from the pipe is attached to the vibrator through soft rubber bushings, which can be bought in the auto parts store or in a construction store in the fastener department.

Thus, you can make a lot of things useful in the farm, having spent only part of the money that would have to pay when buying a finished product. We just need to make some effort and have certain skills.

Make a house more comfortable and comfortable help homemade homemade. Handmade adaptation, decoration of old items will allow you to give the second life to things that will significantly save the budget. It will also allow to decorate the surrounding environment, make the interior creative. Some homemade housekeeping will visually increase space, create comfort.

Single chair

There is no financial opportunity to purchase some furniture in the store. You can successfully get out of this situation, if you make crafts and do it yourself. For example, it is enough just to make out of and

The folding part (legs of the chair) is fastened with hinges or satched on a metal pin, which is fixed with the edges with nuts. The tarpaulin is rectified by two rectangles, whose grooves for bars are drained on the sides. Side parts of the vertex of the chair (the sink frame with armrests) are performed in the form of the letter "b". They are connected by bolts or self-draws. It should be remembered that the folding lower part must be recorded in the working position. Therefore, not far from the connecting pin on the legs of the chair, you need to attach a metal hook - it will slow down stable this design.

Who in the teremchka porridge cooks, gons guests

The craftsmen, acquaintances with a saw and a drill, can even make a children's room in a small apartment. To do this, you need from plywood or other enough lightweight material to build something like shirms with doors and windows. Corner connections plates will mimic the corners of the house. Coloring a self-made score correspondingly, the master will turn it into miniature children's terems.

It is only necessary to take care that this screen can firmly attach to the walls. After all, the safety of children is above all! And the baby table, and a cot, and a box with toys quite successfully fit.

And you can even sew for such walls, any bright fabric is quite suitable, which you can simply hang on the brand, wire or solid cornice.

Knitted furniture

Today it has become extremely fashionable to make benches. Using such homemade housekeeping, storing various items: toys, bedding, pan, cereals. They can be put in the kitchen, in the children's or in the living room. They are also very comfortable for rest both in the city apartment and in the country.

To make furniture with storage boxes, you must first make a frame for it. The bench consists of a rectangular box fixed on legs. The soft part knits in the form of a rectangular parallelogram without a single base and puts on with the lid. In the lower part, you can insert a gum so that the elegant "upholstery" was tightened at the bottom of the bench.

Pofu can be given both square and cylindrical shape. For this, around the circumference of the lower wooden base, vertical racks are stuffed, which are then connected on top of the thick wire. Between the racks, plywood shields are stored so that things are not falling out of the "repository".

Separately cut the upper round base. The soft part knit in the form of a cylinder is fixed on the top of the pouf. It puts on the pouf from above like a cap of a hat box.

Use in homemakes served

Who has a collection of useful tips for the household, must necessarily add such an entry to it: "Do not throw a thing before you do not be sure of its complete lather. Try to give every object the second life! "

From the old clothes, for example, you can associate or weave creative upholstery. Unnecessary tights are widely used, which are cut into a spiral, slightly stretch to twisting strips into the tube. You can use another material, also cutting it with stripes and sewing them with each other. The "yarn" is wounded into the ball, from which then knit fingers either gossip the canvas.

The knitting without spoke repeats the algorithm of ordinary knitting. Only loops hold directly on the fingers. Yes, and stretching the thread happens by them.

For weaving, you can use the frame, on the edges of which nails are stuffed. The thread first put the cross-crosswise, clamping symmetrically arranged nails. They should all cross in one point in the middle of the framework. Then, the center is tied to the end of the thread of the material and begin to make a web for weaving.

And the old refrigerator - in business

As a homemade housekeeping, large household appliances can be used. And then instead of the mutual pullout of the washing machine or the refrigerator on the garbage in the house there may be a creative desired thing. It will be beautiful, and useful.

For a long time there is already a refrigerator reworking technique in incubators. However, such a thing is required only those who are engaged in poultry farming and lives in rural areas. But such original homemade houses and giving from refrigerators, as the chests joined with tissue threads, will decorate the dwellings and allow you to hide in them a lot of useful things.

To make this interior item you need to remove the device engine. If you now put a refrigerator to the door up, then the chest frame is almost ready. It remains only to tie a cape and sew a foam pad to the upper part, cutting into it a hole where the handle hides.

Cape must be made in the form of a rectangular parallelogram without a lower base. To make it easier to use the chest, you can enter the block of "zipper" in the sideworse.

Case in paint - everything will be like a fairy tale

Non-working refrigerators are also easy to turn into lockers. It is only worth putting on their decor. It is possible to make a creative object of the situation in a cartoon style for a nursery or fantasy for an entrance hall, in an antique for a living room or in a music for a cabinet. It all depends on the fancy of the wizard.

Although the working refrigerator will become creative if it is coloring it either stick the original film sticker on the trim. It also will prevent the surface of the unit from scratches and corrosion.

Decor of kitchen machinery

You can simply decorate not quite new binding items with stickers, appliqué or draw pictures on the shearing with paints for metal surfaces. The thing will again be pleased with the eye and will play with fresh paints. Literally in a few hours you can completely change the appearance of the kitchen, not even making "from scratch" homemade housekeeping.

Microwave ovens, washing machines, cabinets and pencils are decorated with pictures, so stick on them with volume decorations.

Each person, putting his skillful hands, can create unique and even luxurious items for their home. It is worth just a little thought and make efforts.

All gardeners want the village plot not only pleased the harvest, but also was attractive. It is not necessary to purchase expensive decorative elements - good summer housekeepings can be made with their own hands from the girlfriend, which for the most part we are thrown into the garbage.

Held crafts for the garden

As a rule, garden, summer cottages do not differ in a large area, and about the comforts in the form of a soul accounts for only to dream. Make a garden shower with your own hands is quite simple:

It is important to choose the right place to accommodate the soul. It is better if it is an exalted place, then it is more convenient to equip the drain. Do not place a shower away from home to do not feel uncomfortable cool in the evening. Choose a plot, not covered by branches of shrubs and trees - water will not heat through them, and there will be many insects.

The easiest view of the soul is in the form of a rack attached on the wall or vertical panel. You will only stay to bring water and make wastewater removal.

Among other useful homemakes for the country area:

Arbor, where you can spend time summer evening.
Recreation area with mangal.
Playground for kids: swing, horizontal bar, sandbox, a small table with a bench.

Original flower beds

Flowers on the household plot - a mandatory element, with them the cottage looks attractive. The original flower garden can be made from various items - at least from the old car. Find her place in the landscape, fill in the ground and plant the annuals. Lush multicolored caps will attract attention with bright colors and fragrances.

You can turn an old bike into the colors stand. Place small caspo with decorative plants and flowers on it. It is better if they are different: low and medium in height hanging, different colors and forms.

On the fence or railings of the open terrace, the veranda can be placed unusual kashpo, the role of which will play perfectly ... Old teapots, bowls and pans. And the remaining alone tea cups from the service can be suspended to the wall obliquely: let the effect be created, as if the flowers are "poured" from them.

In the garden, an old bath, a shabby wooden chair, a watering can be the basis for a flower bed, even the old shoes can be the basis for caspo. Such an unusual application of old things will cause admiration for the neighbors and your guests.

Original flower garden can be made of old car tires:

Paint a tire in a bright color and hang on the chains to a solid bitch on a tree. Insert the tire insert the cache with the flower. Speak will look at hanging flowering plants.

Place the tire on the stand. Gently wrap it with a thick jute twine so that each row firmly lightened to the previous one. Fill the tank with soil and drop flowers.

Original furniture for giving can be made of wooden pallets. Sofas and benches, supplemented with soft pillows, will make rest comfortable.

Saturday evening, crouching to relax from garden affairs, look around around in search of material for original crafts for your site. Showing the fantasy and putting a little effort, you will turn your site into a cozy area of \u200b\u200brecreation or a fabulous kingdom.