House for Barbie with his hands from cardboard. Puppet lodge with your own plywood hands: Scheme and step-by-step instruction. Big house for dolls from boxes with your own hands, step by step with photos

22.07.2019

Girls adore to play dolls, and so that the game is even more interesting and realistic, a house is needed for dolls. In the stores of toys you can find houses for Barbie, but they will cost they will be unnecessarily expensive.

The optimal solution will make it possible to make a dwelling for dolls yourself from undergraduate materials - for example, out of boxes or plywood.

The house from the box does not require material investments at all, and the version of the plywood sheets will also cost the minimum amount. Toy furniture can be bought, so do it yourself from matchboxes and other suitable materials.

So that the puppet housing is realistic, it can be saved by real wallpaper, use for the floor linoleum, and for carpets - pieces of suitable fabric.

Master class number 1. Cardboard box house

The house in which the entire doll family will fit, you can make a cardboard box, as the author of the GOOBLA offers from Yaplakal.com.

Any large box from under household appliances is suitable: an old TV, vacuum cleaner or microwave. The more the box will be, the more the design it turns out, so it is recommended to choose the most as much as possible.

Materials that will be needed for work:

big cardboard box;
glue;
stationery knife;
trimming wallpapers;
color and white paper;
match boxes;
styrofoam;
fabric flaps;
foil.

1. The empty box must be put on the side of the empty side to yourself. One of the side walls will become the ceiling, the bottom - the floor, and the bottom of the box is the rear wall in the dwelling. One wall will not be, as it will not be played.

2. Next you need to cut windows in the walls using the stationery knife. Previously, it is necessary to make a pencil drawings for windows. So that they are the same size and were at the same level, use a ruler. Cut an arbitrary number of windows, depending on your ideas about the design of future rooms.

3. Windows must be saved with white paper to make the impression of the windowsills and window openings. Glaping the windows can be dense polyethylene from files for documents.

4. Windows must be issued both outside and from the inside. You can use white paper.

5. In order for two rooms to be downstairs, you need to make a partition from a piece of cardboard. You can glue it with thick paper, which will replace the building corners in a paper house. You can also arrange the ceiling on the second floor. To do this, use the remnants of real wallpaper.

6. Then you need to attach the basis of the second floor. So that it keeps well, you need to use the same principle of corners. The walls in the house are embraced by ordinary wallpaper.

7. Paul on the second floor can also be saved so that it looks organically and well kept. You also need to put the wall on the second floor, which will be divided by two rooms.

8. Outside, the design can be saved with paper so that the house looks beautiful. Use wallpapers that mimic natural exterior decoration.

9. If there are no such wallpapers, you can cut "bricks" from colored paper. Shooting blocks on a white background, you will get a brick wall at home.

10. Do not forget to wake all the outer walls so that they look harmoniously.

11. After the "finishing" work came to an end, you need to leave the design for time to dry the glue. It will take a couple of hours or even less.

12. When glue reduced, you can continue to work.

13. There must be a roof in the house. We make it from cardboard. So that she glued well to the base, the ends need to bend.

14. The roof also needs to be saved on all sides so that it corresponds to the house. In the attic you can make an attic: cutting out the window, glue the balcony railings and add other items if desired.

15. Furniture is also made from cardboard, matchboxes and girlfriends. Calculate the headsets can be colored paper. Food cut out of plasticine.

16. For the bathroom, use foam, the plumbing is well obtained from it.

17. For the mirror in the bedroom and a foil is suitable for a bathroom, and for carpet - a piece of suitable fabric.

18. Dresser, bed and table is made from match boxes, sofa from foam.

19. House with a balcony and attic Ready! It's time to populate characters.

Filling a house

From trimming of Tulle, excellent curtains are obtained, which can be fixed on rigid wire cornices.
As a carpet, a round or square piece of fur fabric or any other dense with patterns or one-photon is excellent.
Sofa and sleeping pillows can be fill with sintec or cotton.
Pictures for decoration The child can draw yourself. Then neatly cut down and get them on a dense cardboard that will mimic the frame. By width and length, the cardboard must have more pattern.
Upholstered furniture can be fascinated by self-syntheps or cotton, the frame will have to do from plywood.

All sorts of materials are suitable for puppet furniture bases - from paper to plywood trimming. The most realistic looks at the plywood options.

№2. House of plywood

A real mansion where you can settle all dolls is a dream for many children, especially for girls.

If you can make a crayle and you have a little free time, you can build a realistic home for plywood dolls, as the joker from Yaplakal.com did. The author sat in one week.

Such materials will be needed for work:

two 8 mm plywood sheet;
electrolovik;
furniture cloves;
acrylic sealant;
termoklay;
pieces of linoleum and wallpaper;
acrylic paint.

Instructions, how to make a house for dolls do it yourself from plywood:

1. The construction scheme is developed. As a basis, you can take a simplified plan of the real home. It is important to correctly calculate the proportions in order not to be mistaken in size.

3. The design is assembled on furniture carnations of small diameter. For reliability, you can wash the seams with acrylic sealant, this technique will add strength designs.

4. In size, the house is quite large. Sizes: Height - 1000 mm; width - 1100 mm; Depth - 400 mm.

6. Inside the house is flooded with remnants of paper wallpaper, and the ceiling is painted with acrylic paint in tone.

7. Linoleum is glued to the floor with a thermal stitch. If you do not have linoleum residues, you will fit dense wallpaper or fabric suitable for the floor. You can also organize carpets instead of carpet or linoleum.

8. Puppet furniture can be purchased in special toy departments.

9. Housing lighting with LED lamp:

10. In the house you can make rooms to taste: for example, bathroom, living room, kitchen, bedroom, etc. Depending on the acquired furniture.

In the house with such dimensions, the dolls of Barbie and the models of dolls are excellent.

Floors can be any quantity - depending on the size of the dwelling.
In cardboard houses you can make the door, just cutting it into the wall.
Large houses can be made of several cardboard boxes, gluing them with each other side walls.
As a basis for the house, a small book rack is suitable, for example, from IKEA. In this case, you do not have to make anything, you just need to cut out several windows and put in a few walls.
To the base of plywood or shelving, you can fasten the wheels - so it can be moved.

The big advantage of houses for dolls is that they can be masked with their own hands, if, of course, the future dwelling for dolls should not be a gift.

The kid can help you get the walls at home by wallpaper, arrange furniture, invent accessories. This is a great way to get close to the child, and also help him show creativity and realize fantasies.

In addition, a dollhouse that you did for a child yourself, children will love much more than the most luxurious purchase option.

The dream of any girl is a big beautiful dollhouse, equipped with all interior objects, very expensive pleasure.

Not everyone can buy it in the store.

However, you can make a puppet lodge with your own hands, and if you attract your daughter to the process, the joint work will bring the pleasure of the whole family.

In order to proceed with the manufacture, you must first resolve the issue with the size and material of the future design. Then make a project of the house, make drawings for drinking or cutting, thinking out and pick up materials for finishing, consider bonding options and setting the entire structure. It is important that she was stable and could withstand small "shocks."

The size will depend on the height of dolls, which will "live" there, as well as on the possibilities of the room. After all, the apartments on half the room will take too much space, limiting the hostess.

At the same time, a very small design will be more complex in manufacturing and finishing, because it is not easy to work with small details.

For ease of use, the height of the ceilings is installed at the level of double-growing dolls, then it will be easy to move it on the rooms and installed inside. Higher ceilings are just welcome, they will make the game even more interesting.

The depth of the rooms is determined on the basis of the growth of dolls and the need for a free space for items inside the house. On average, it is 30-45 centimeters, but may be more. The width is calculated on the basis of the number of rooms for dolls and room volumes.

The shape of the house is usually reminded by a rectangle, elongated in height or width, it all depends on the manufacturer's imagination. For a large design, you can use furniture wheels that are screwed from below and make it easy to move the housing for dolls to any place.

You can create a project on paper or using modern technologies, in the program on the computer, which will calculate the number of materials needed for the building.

An example of a standard Doll House Project:

In many ways, the size depends on the material, since not every raw material can save the shape and withstand the load. Let's try to consider houses from different materials.

Plywood or laminate

Plywood is a very good choice for making a puppet house. It is well holding the shape, strong enough, it is easily fastened with glue or self-tapping screws. It is convenient to work with it using standard tools, only after completion of the work it is desirable to clean it with a skin to make it smooth.

Phaneru is convenient to decorate with paper or cloth, and it is also durable. Laminate has similar properties, which is also often used to create a puppet apartment.

Example of a puppet diagram:

To create you will need:

laminate or plywood, with a thickness of at least 7 mm;
pVA glue, it can be replaced with carpentry;
electrolovik;
wallpaper remains that will be used to decorate walls, furniture items, and for sex you can use the self-adhesive film;
pencil for applying marks;
roulette or centimeter.

The manufacturing process consists of the following steps:

Drinking the wall of the design of plywood in size in the drawing.
Selecting places where windows, doors will be, drinking them.
Collection of construction with carbon black and small carnations.
Roof construction, its design. The roof of the house can be covered with corrugated cardboard and coloring, soaming thus tiled.
Fastening the design to the base is a piece of plywood having a little large sizes. This is necessary to impart the design of greater stability and the possibility of an additional decor. For example, on a wide surface in front of the house, you can organize a veranda or flowerbeds.
Decorating the inner and outer sides of the walls, gender. Sometimes it is more convenient to salary the inner walls before collecting the house, then there will not be visible joints, but in this case it is important not to make large screws, disrupting the proportions of the design.
Arrangement of furniture.
Interior decoration with small details: curtains, rugs, tablecloths and other things.

An example of a step-by-step house of house in the photo (instruction for dad):

Project Marking of the Future House Drilling Saving Revision Flying Filed Putty Grinding Finished Walls Painted Painted Details Marking for Fasteners Assembling Assembly Finished Design Interior Balcony Room

Plasterboard layouts

Plasterboard is also a popular material because of its strength and low cost, because it often remains after repair in the form of small pieces that have nowhere to attach. Barbie's house is the perfect option for this. However, it is harder to fasten it, the adhesive is good here, it will be necessary to align the place of the cut to reduce the consumption of the means.

Self-tapping screws twisted in metal corners will be more efficient. But they will need to take small sizes or then sprinkle the tips sticking outside.

The scheme of working with plasterboard is similar to the design of plywood, the tools for it are needed the same. Therefore, you can use the scheme above.

Styrofoam

This material is also from the discharge of the budget remaining after the purchase of household appliances or other goods. His only disadvantage is fragility, so it should be carefully working with foam.

For work you will need:

polyfoam, preferably large sheets;
toothpicks, bamboo sticks (remain from sushi sets);
glue pistol;
several wooden lines;
corrugated cardboard;
wallpaper remains;
sponge of foam
remnants of ceiling plinths;
accessories for creating an interior.

The manufacturing process will be presented in stages:

Project development, drawing up drawing.
Cutting foam according to the drawing data, it is better to do a hot knife, then the foam will be less crumble.
Cutting future windows, doorways.
Assembly. To do this, you will need toothpicks that need to be broken in half, copper pieces of foam, between them, apply glue and press it tightly.
The gluing ceiling and floor occurs also with a glue gun, only to harden the designs need to be strengthened. For this, bamboo sticks are used, which are glued to the foam in the form of transverse beams.
Separately built an inter-storey staircase, it is made of wooden lines or the same foam, and the railing of toothpicks or bamboo sticks. After that, ready to go into the design.
Production of the roof, material for which foam or corrugated cardboard can serve.
The decoration from the outside includes painting the entire building of the acrylic paint, which is convenient to apply a foam sponge with light tangent movements. Outside, a balcony that is assembled similar to the stairs can be performed.
Finishing from the inside, it uses pieces of wallpapers and colored paper for it, from the ceiling plinth, you can cut window sills and other interior details. Curtains, carpets, small decorations will add comfort designs.
Arrangement of furniture, settlement.

Bookshelf or rack

It is not necessary to purchase materials for the manufacture of housing for dolls, sometimes it is enough to use interior items that are no longer in the go. So, the old bookshelf or the cabinet may well become housing for Monster High or a small princess.

At the same time, the scope of work will be minimal: it will only be necessary to close the rear wall of the house and equip the internal contents. Details such as the roof and chimney, for the design, standing at the wall, can generally be drawn or depicted with adhesive tape.

Old cabinet or chest

Old bedside tables, dressers, wardrobes from wood can also be used in the attic or in the basement. They are much better suitable for large dolls and require minimal processing.

Internal shelves, boxes can be removed by creating thus large rooms. Or, on the contrary, add partitions between high ceilings under the height of the dolls used. And of course, finishing, which will give the product a finished look.

Cardboard

The popularity of cardboard is quite explained, it is inexpensive, easily going, is always available. True, this design is short-lived, because the cardboard breaks and rifles. Therefore, it is better to use corrugated cardboard that is used for packaging.

The house from it is going to quickly and easily from the primary materials:

corrugated cardboard;
finishing elements;
fabrics and other things.

Tools that will be needed in work:

drawings, detail templates;
knife, tassels, paints, pencils, markers;
glue pistol;
rule and others.

Photo scheme:

Photo of a house:

The assembly process is simple and similar to other constructions, but the cardboard has some features: it is easily lightning, so it is necessary to crush it carefully. Bashed better with glue, with this edges are not trimmed, but bend inside and act as a fastening element.

To bend the cardboard correctly on this place, you need to spend something pointed, but not cutting, for example, a pencil. A groove is formed, according to which the material will easily bend.

Cut details like windows are better than a stationery knife on the outlined lines.

Boxes

Cardboard boxes is the easiest way to assemble a dollhouse for a girl. To do this, you will need to go to the black outlet of the nearest store and dial closest boxes. This will allow faster and easier to collect a house.

Then you need to be copped with a glue or bilateral tape. Cut windows and create an environment. External finish can also be performed from boxes, such as a balcony or terrace.

Fabric

The fabric house is a good option for a small room, as it can develop and clean for a while. For its manufacture, a dense fabric will need with various drawings and the skill skill.

The design is collected from the fabric according to the scheme. Each element is sewn separately, then turned out and fastened into a single house. To seal the walls, you can use a cardboard or a plastic mesh, which is placed inside, they will not give the walls to bend, make all the product more durable. However, the house with a cardboard can not be washed.

Video lesson on creating a house of fabric and cardboard:

How to make a staircase for a house or castle?

The staircase in a puppet house is one of the most complex elements, a real task for dad. The easiest way to make it from cardboard or foamflast. The first can be simply bend to the desired position, and then strengthen the intermediate parts using the same foam.

Wooden staircase can be made of two lines and several strokes. On the rules at equal gaps, it is necessary to apply small cuts, in which at an angle of about 45 degrees are inserted from small pieces of wood, which are attached to glue into one and immediately into the second line. Wide rules can perform the role of railing.

The foam staircase can be cut out of a piece if there is a sufficiently large bar. It is placed at an angle and a hot knife drank steps. Real masters can build a staircase from wooden bars on special drawings.

Examples of stairs in the photo:

Interior arrangement - Toy furniture and decor

Interior arrangement is a real holiday for the girl, so it is worth inviting it to help in the design of the interior and the manufacture of furniture. The latter can also be very diverse. The most accessible option is a cardboard.

For decoration will go all that is in the house:

wallpaper remains;
pieces of fabrics;
beads;
artificial flowers;
toothpick;
cardboard boxes and so on.

It all depends only from the manufacturer's imagination. Beautiful curtains, bedspreads, tablecloths, even paintings on the walls can be made independently. It will not require a lot of time, but will delight and help attract the girl to work on home and sewing.

Video lesson to create furniture from plywood:

Video lesson for the creation of foam furniture:

Lighting

Make lighting in the house seems almost impossible, because the connection to the network and the presence of wires is far from safe. Especially if the dwelling is made of wood or cardboard. In case of closure, a fire is possible.

However, there is a simple secure solution - small LED bulbs running from batteries. They have a very small tension, and the fastening is simple - with the help of bilateral tape.

Creating a housing lighting for dolls:

Making a puppet house - a fascinating and long process in which not only parents should participate, but also their children. Even a small child can make small details or hold the tools. At the same time, collaboration unites, and the surveyed skills are aroused by children much faster and the process will be interesting.

Examples of puppet houses in the photo.

Despite the abundance of new-fashioned toys, flooded children's departments, the dreams of little girls remain unchanged from generation to generation. And one of these dreams will definitely be a puppet house. With your own hands, this toy is easy. And the joy and delight of the little princess will delight the masters. To create a puppet dwelling, it is enough to arma with infirred materials and inspiration.

The best gift for daughter will be a puppet housethat will make your own dad. Before starting work, it is necessary to determine what the construction will be. To create it, almost any materials will be suitable, from cardboard boxes to foam. However, it is worth taking care of the durability of the structure, so that she did not let down in the most responsible moment.

The most practical and hardy is the house of laminate or plywood. It is more difficult to make it, but the applied efforts will pay off more than, because the product from such a material will be difficult to distinguish from purchased.

The construction itself is a box without anterior wall. Inside this box provides small branches that play the role of rooms. Sometimes the house is made through, but it will be more practical to equip the back of the back wall.

For aesthetic appearance in the "state of rest", the house is equipped with anterior wall, which is attached with the help of door capekers. Such a house can be closed so that the puppet interior does not climb the girl's room.

Some masters prefer to make a house on wheels. This design can be moved around the room or apartment. In this case, the front wall is simply needed, in order to move, the sofa or the merger itself was lost.

Plywood, laminate or tree

The house from the laminate will become a real masterpiece, so it is necessary to approach its creation seriously. To begin with, it is worth choosing a drawing or draw the scheme yourself.

The diagram of the puppet house from plywood with their own hands provides for the size of the walls and the mark of window and door openings. Of course, the parameters of the house can be changed at its discretion, observing the proportion. You can also add rooms or balconies. It all depends on the wishes of the small customer and the amount of free time.

So, it will take to create a house:

Durable material, such as plywood.
PVA, as well as joinery glue.
Electric jigsaw.
Roulette, ruler, pencil.
Material for finishing walls and floor in a house. Self-adhesive film is suitable.
Wallpaper.

For drawing the same details, for example, interior partitions, you can use paper clay. The rest of the details of the house are drawn on paper, then transferred to Phaneur. From plywood cut the walls of the house. On the cut parts mark windows and also cut them, cut the doors.

To assemble the details will help the joinery glue. You can strengthen the design with small cloves, which is especially relevant for large houses.

There is no sharp necessity in the roof, but its presence will be the logical conclusion of the construction. You can also wake it with cardboard and draw a tile on it.

The assembled house should be glued to a piece of plywood, somewhat wider than the base of the house itself. This will give him stability. Slices of plywood sticking on the sides can be beat. For example, make a lawn, covered with artificial grass.

Cover walls with wallpaper is advised even before the house assembly. You can do it in the finished design, but it is much more convenient to collect already fastening details. The same applies to gender. However, it should be borne in mind that the glue "Caprisen" to some surfaces.

You can decorate the interior of the house at your discretion. Food furniture, textiles and rugs come in handy. You can also leave the interior question open, so that the owner took up its arrangement personally.

Plasterboard and other materials

If the plasterboard remained after repair, the fate itself ordered to create a masterpiece for a small princess. Of this durable and serious material, you can make a real building with many floors, bathroom and kitchen.

Of the benefits of the material, it is worth noting the ease of construction and the white color of the drywall, thanks to which the house will look neat. Plus, the comparative purity of the process is also considered. For example, work with foam will necessarily bring a small snowfall in the workshop.

With the help of drywall, it is possible to make partitions between rooms and toy furniture. Clear such walls with wallpaper very convenient.

Air housing for Barbie

A wonderful house for dolls can be made of packaging foam. You can give such a toy for older girls, because the foam is very fragile and not suitable for kids games.

Necessary materials:

Making a house for dolls should be given the age of its owner. To save place in the nursery, the house is advised to do high. The attic room in it should be about the level of the child's eye.

Step-by-step instructions for creating a light house:

An interesting idea for making a house will be a printout of various elements on the printer. For example, the picture depicting the sea depths, glued to the transparent plastic, will play the role of aquarium. You can also print landscapes and simulate with their help window openings. Dolls will like the mountain view or sandy coast.

Other options for building

To create a dwelling for dolls, it is not necessary to be a wood master or buy foam sheets. You can settle toys in a house created from girlfriend.

Carton boxes

You can make a puppet house out of the box. With your own hands, this design is interesting and simple. It is enough to glue the boxes one to another, considering the growth of dolls so that they all are placed in the room.

Whatever thickness is a cardboard, a house from it requires compliance with certain rules. Interior partitions in such a building are needed. They will play the role of bearing walls. The more the rooms will be on the same floor, the stronger will be the design. In the role of a column, you can use empty sleeves from paper towels. They will support the ceiling at home.

Aesthetic appearance of corrugated cardboard can be corrected using a fabric that is covered with walls and floor in a house. Also with the help of fabric wallpapers hide the jokes of cardboard.

Racks and bookshelves

To create a house, you can use ready-made bookshelves or racks. All work on such a project comes down to designing the interior, since the walls and roof in the construction are ready.

It is best to paint the shelf in white or any light color. You can also draw curly ivy or other architectural vegetation on the housing walls.

Cheer the walls inside the rooms can be paper, wallpaper, self-adhesive film. For flooring, you can use pieces of carpet.

A heavy wooden design is advised to tightly move to the wall. As a back wall, you can use a plywood sheet, nailed to the shelving itself.

mobile version

If the children's room is not enough space to install a cumbersome design, you can make a house from compact materials. For example, folders for documents.

This will require four cardboard folders. Each page decorate the wallpaper printed on the printer. You can also add textile appliques in the form of furniture or curtains.

Before you make a house for dolls, let's measure future tenants. Note the growth of the doll, cut off the top of the folder in the form of an acute roof. If toys are too high, the top edge of the folder is left square.

In one of the walls you can make a hole window. Moving details will be perfectly looking, for example, a table.

For those who want to make a house for dolls with their own hands, step-by-step master classes and ideas on the decor of the miniature interior will be useful. Camping such a house will enjoy the whole family.

Stores offer customers a wide range of all sorts of toys, including puppet houses. To get one of them dreams every girl, while parents can easily make a beautiful and durable house for dolls in just a few days. Moreover, the child will be able to take an active part in the process and express all his wishes about the size and design. To make a puppet lodge with your own hands from plywood, you will need a scheme that you can draw yourself or find it ready on the Internet.

Making a drawing of a puppet house from plywood with the size of all design elements

The toy house and plywood can not be built without a detailed drawing, on which the dimensions of all its parts will be applied. To do this, you must first determine the approximate dimensions of the future at home, and imagine what it will be forms.

Reduced or increasing the design, it should be remembered that all sizes should also be changed proportionally.

The house consists of such parts:

Rear wall: has a pentagon shape. Its side sides are 76 cm, and the base is 106 cm. The upper side is an uneven triangle whose vertex is located at an altitude of 91 cm.
Gender: It has a rectangular shape. Its dimensions 106x38 cm.
Overlapping the second floor: a rectangle with dimensions of 104x36 cm.
Side wall (2detali): It is a rectangle 36x76 cm.
The inner wall on the right side: 25x50 cm rectangle.
Interior wall on the left side: rectangle 25x43 cm.
The left side of the roof: a rectangle of 76x39 cm.
Right side of the roof: Rectangle with parameters 45x39 cm.

How to make a house for dolls with your own hands from plywood: step-by-step guide

Changing the parts with an electrolybiz or hacksaws need to be carefully treated with sandpaper with fine spraying, and then start assembling. At this stage, the windows of arbitrary sizes are cut and also carefully processed by sandpaper.

Making a house step by step:

To the base, side walls are attached with the help of self-tapping and construction glue, and then overlapping the second floor and internal partitions.
The roof is mounted.
A decorative tile is pasted on the roof made of cardboard, colored paper or other materials.
Next, the house is painted with paints (acrylic, gouache, watercolor);
Rooms are flooded with wallpaper, cloth, film.
Floors are covered with linoleum linoleum, laminate, carpet, felt.
Furniture and interior items are disposed.

Near the house you can make a small kindergarten placed in a box in which trees cut from cardboard will grow.

If the parts were not very smoothly and the gap was formed between them, then it can be smeared with a putty on the tree, and then paint.

How to assemble a house of plywood for children with their own hands easy and fast

A small plywood house designed for games will have to do any child. After all, he will have his own personal space. Collect the most such design is easy, if you pre-make drawings, and cut the items.

What will be needed for work:

Plywood sheets whose thickness is at least ten millimeters. The required amount is easy to determine by folding all the areas of future parts.
Bar for frame size 40x40 or 50x50 mm.
Plexiglas or plastic for windows.
Canopies for doors.
Finishing materials (wallpaper, non-toxic paint, putty).

From the bar and plywood are made blanks and squeaks sandpaper to full smoothness. The frame is collected from the bar, and plywood blanks are attached to it. Next, windows and doors are installed. Then the house can be painted outside and from the inside or wake up with wallpaper. Furniture is entered. From the remains of plywood you can make scenery and install them around the house. Children's game house is ready.

Fasteners must be hidden so that the child can not be injured.

We make a lock from plywood with their own hands: drawings and recommendations

Plywood is one of the easiest in the processing of materials, so it can be made from it not only simple houses, but also beautiful castles for princesses and knights. To do this, we need to be patient and carefully draw every detail of the future castle. Drawings are performed by analogy with drawings of a dollhouse, but towers, balconies and terraces are added to the details. On the thematic sites there are a lot of interesting models that are easy to build yourself.

Tools required for work:

Pencil simple;
Line (simple and figured);
Electrolovik;
Screwdriver or screwdriver;
A hammer;
Sandpaper;
Tassels;
Fastening elements.

For the fence of balconies, you can use sticks from ice cream.

Beautiful Furniture for Plywood Dolls: Drawings and Methods

From plywood you can make almost any furniture in a toy house: beds, tables, chairs, wardrobes, sofas, shelves. The furniture made in drawings is obtained quite large, so it will suit both for the Barbie doll and for the puffs.

Details of furniture can be glued or combined with self-drawers and furniture cloves. Plywood is mainly taken, about 4 mm thick.

What you need for the manufacture of furniture:

Pencil and paper;
Lobzik manual;
Small sandpaper;
Liquid nails or joinery glue;
Paints and varnish.

When assembling small furniture, it is better to use glue, because the fasteners can damage the parts.

For all parts of the furniture, you must first draw and cut the pattern. Then climb it on plywood and pubesome cutting the design elements. The edges are squear. Details must be combined with each other, and then paint and cover with varnish or using a stapler to hammer with a cloth.

Making a house of plywood for dolls with your own hands (video instruction)

From plywood you can make durable and beautiful toys that will delight the child for a long time. If there are drawings, free time and the droplets of patience, it will not be difficult for even those who have no skills in this matter. And manifesting a fantasy you can create real masterpieces that will cause surprise and delight not only in the child, but also from others.

Probably there is no little girl in the world, which would not dream about a doll house. You can buy a variety of toy cottages in stores that look like real. It is worth trying to make a house with your own hands. A mini-house is designed for small dolls, other toys that the child plays. It can be made of a beautiful box with compartments, plywood, fabrics. The house will also perform a small cabinet for toys.

Making a design will not take much time, forces will require the minimum amount of materials, the child will definitely be delighted! An easy way to please the baby is to make a house for dolls with your hands from cardboard, boxes, plywood. How to do it - we will tell below.

Suspended house from the box for Lalalupsea, other small dolls

What will take:

square box;
color Scotch, adhesive tape;
pVA glue;
scissors;
colored paper scrapbooking.

How to make a house - step by step

Outdoor cardboard house do it yourself

Before proceeding with the work, choose the suitable house drawings, it is worth understanding which material it is better to use how to cut holes, glue the rooms so that the design is durable, stable.

How to choose a cardboard box?

Important material - boxes, or rather, the cardboard from which the boxes are made. The difference in various types of cardboard is presented in the photo below:

The designs from the cardboard shown in the left shot are durable, stable, are not deformed under the weight of subsequent floors. The floor from the cardboard shown in the right picture can be pricked under the weight of the next floor, you will have to start working again.

How to cut the rooms?

Cut rooms not easy. After reviewing many photos of houses, it can be seen that some holes have a frame. This is the most convenient opening option. Remove the whole side - error! Such a room will tremble, fall apart, looks unsightly. Frame (although without the bottom) need to be cut in cardboard boxes that need to be combined, increasing the interior of the rooms. To understand what it is about, it is worth seeing visual manuals in the form of drawings below.

This is how the room from one box is created: you need to designate the future hole for access, leave 5 centimeters for the frame, cut the hole.

Step-by-step housework drawings consisting of two boxes

Room connection - wall crosslinking

For a dollhouse does not fall apart, you need to provide a solid connection of the rooms. Reliable way of connecting rooms from cardboard boxes - stitching.

Required:

gypsy needle
thick thread
pliers.

Stitched cardboard with the simplest big stitches.

Regardless of whether the boxes with an open connector are combined or with the opening of the door, always follow the rule: stitch on the edge!

It is necessary to "immobilize" the boxes in the workplaces, where they can be shifted under the influence of the applied adhesive, it will be difficult to work, it is easy to spoil the final result. Below are 3 examples of stitching rooms.

	2 boxes are connected in the drawing without holes. You need to "grab" in several places the middle, so that after gluing the cardboard does not move.
	On the second drawing, an example of stitching boxes with a hole is shown. Note. On this and the following drawings for better visibility of the seams "hidden" some of the walls of the rooms.
	The third drawing shows an example of stitching boxes with a hole for the door.

Complete ceilings with floors

Seam the ceiling and floor need close to the edge - this is a single rule for walls, ceilings.
There is a second rule: it is necessary to immobilize "chatting" elements - parts indicated in the figure below:

Now we start sewing. First, the outer edges are sewn, then internal.

At the end, we fix the chatting items, sew along the line of their contact.

Attention. Cutting elements located on the floor of the upper floor and on the ceiling of the lower floor, if they do not overlap, we like each. The following schemes present such situations. i:

What to do if the chatting elements do not touch each other, and it turns out a hole?

If the situation occurs on the ceiling - nothing terrible.
If the hole is obtained in the floor - it must be closed.

There are 3 ways to close the hole.

The first is to choose another box.
The second is to rotate the cardboard box 180 degrees vertically (the hole moves to the ceiling).
The third is to fill the hole, you need to insert a piece of cardboard of the appropriate size (the same thickness that the entire cardboard), then sew, as shown in the diagram below.

Forms and sizes

The above is the main knowledge about the sewing of a puppet house from cardboard boxes. Which option to choose depends on the builder. Choosing the boxes, you can manipulate the dimensions, distribution of rooms, create a tiny single-storey house or a huge multi-level villa. Below are several schemes depicting the addition of the following floors of a doll house. Boxes can have different heights, width, depth, giving a house special form.

Stock Foto Cardboard house design

Puppet house plywood, photo

Plywood house - a real challenge. With plywood it is more difficult to work than with cardboard. It is worth preparation for the work in advance. An important plan, a house design drawn on a sheet with sizes. Below are instructions, how to build a puppet house from plywood.

Project preparation

The project is advisable to draw on a sheet into a cell. Scale may look like this: 2 cells on a sheet \u003d 10 centimeters. So easy to calculate the real size of the house. The house can be made small or more design - with 2-3 floors.

A small house in the diagram has dimensions: width - 60, height - 57 centimeters.
The large house, presented in the picture, is in a height of 120, in width - 80 centimeters. Depth - 22 centimeters.

Calculation of the number of materials required tools

Below is the calculation for the production of a large house.

Necessary materials:

hardwood plywood 4 mm thick, sizes 90/22 centimeters (side walls) - 2 pieces;
plywood 4 mm, sizes 80 × 22 centimeters (lower and upper part of the structure) - 2 pieces;
plywood 4 mm, sizes 79.2 × 22 centimeters (floors) - 2 pieces;
plywood 4 mm, dimensions 50 × 22 centimeters (roof) - 2 pieces;
plywood 4 mm, dimensions 30 × 22 centimeters (interior walls) - 2 pieces;
plywood 4 mm, dimensions 60 × 20 centimeters (front wall with chimney);
laminated fiberboard 3 mm 120 × 80 centimeters (rear wall);
acrylic paint for wood.

Tools and accessories:

adhesive for wood;
hammer, nails;
lobzik;
sponge roller;
line;
pencil.

Step-by-step instruction

Painsel painting. Plywood elements need to be covered with acrylic paint. The finished product is painted much more difficult. Gypoallergenic paints are now available, dried in 20-30 minutes. Paints are non-toxic, there are no smell, they can be used indoors.
Construction of a rectangular carcass. When the paint is driving, you can proceed to the construction of a rectangular cottage. You will need: plywood 4 mm, sizes 90 × 22 cm (side walls) - 2 pieces; Plywood 4 mm, dimensions of 80 × 22 cm (lower and upper part of the structure) - 2 pieces. On tangentials of individual elements of plywood, it is necessary to apply glue, comparing them with each other at right angles, fasten the connection with small nails. Plywood 4-mm is very fragile, so the accuracy of ripping the nails is important. Attention, the use of glue is necessary! Without its binding properties, nails will fall out of plywood, work is placed.
Construction of individual floors. The next step is to attach the shelves that will serve as a floor for individual floors. Shelves consist of 2 sheets of plywood size 79.2 × 22 cm each. In the project, each floor has a height of 30 cm. On a rectangular design, measure 30 cm from the base, then another 60 centimeters from the base. Draw a horizontal line, noting the location where the first shelf is attached, draw it with glue, attach to the shelf line. Make a similar work by 60 cm from the base. Then attach 2 shelves with nails to the side walls.
Rear wall cutting. It's time to make the rear wall of the laminated fiberboard with dimensions of 120 × 80 cm. On the long sides of the plate, measure 30 cm from the top edge. Mark the center of the upper edge is the future roof. Spend 2 lines from the top of the roof to the places marked at an altitude of 30 centimeters from above, the contour of the triangle will turn out. Using the jigsaw, cut out along the drawn lines shape of a house.
Fastening the back wall. The edges of the fiberboard are covered with glue, attach to the house, fix with nails.
Roof. For the roof, 2 pieces of plywood 50 × 22 centimeters each were used. Lubricate the triangular edges of the Fiberboard and one shortest edge of plywood glue. Get the roof to the edge of the house, connecting both plywood leaf at right angles. Strengthen the design of nails.
Chimney. Of the plywood size of 60 × 20 cm, cut out the shape of the chimney with the fragment of the facade. Do not forget to cut the bathroom door. The first element must be glued, then kilgle to the edge of the upper shelf and roof.
Separate walls. The last stage of construction is the insertion of separation partitions forming separate rooms. Use 2 plywood 30 × 22 centimeters. You need to place the plywood in the space for the choice between floors. You can freely move them, changing the size, the location of the rooms.

Below is several unique puppet plywood houses made by hand.

Wooden house - master class

The products below will require experience, skill. A house of a tree will be able to make dad who will not regret the time, forces to please the baby.

Bag house with your own hands - Photo

The next house will be able to make mom. Original idea - Bag House. It is not difficult to sew it. The girl's bag will be able to take in the kindergarten, playing with girlfriends for a walk.

Video