Homemade things with their own hands. Useful homemade for home - do it yourself. Collection of photos of country homemade

Nothing brings joy into the house as a thing created by her own hands. True, different homemade for the house not only fill the life with bright colors, but also give the interior uniqueness and some highlight. And certainly about such a thing (let it be a little bauble) it is impossible to forget. And it is not so important that it is homemade wood for home, from paper or plasticine. Options and methods of manufacturing various things - millions, and today we will look at a few of them. So, how to make interesting homemade homemakes?

Shelf of tin jars

It would seem that such a little thing is a jar of coffee. However, even from it can be made a beautiful, comfortable and useful shelf for storing economic stories. Often in such tanks are kept various souvenirs and memorable photos. Practical benefits from this homemade a little bit, but such jars look very harmonious.

Details about the procedure for making this craft

1. First, in the jars, the drill or a special knife-plowing holes (in the upper and lower 3, 3, and in the walls of all others are 2 points).

2. Next jars are bonded among themselves. Nuts and short-sized nuts are used as fasteners. By the way, to obtain the desired (beautiful) result, you will need to have at least 5-6 such jars.

3. After in the tanks, a hole under the screws is made. In the bottom of the jars located in the upper part of the design, 1-2 holes for fastening the shelf to the wall are made. Finished homemade is screwed by a screwdriver or a screwdriver. For this, a dowel is driven into the wall.

Everything, now homemade for the house is introduced into the case. Be sure - a different little thing in such jars is definitely not lost. Thus, you kill two hare at once - decorate the interior and get rid of the mess in the house.

Homemade for home - how to make a clock on a CD / DVD disk?

The clock on the CD is also a very interesting and original interior decoration option.

As can be seen, the design of this device is very original, and therefore it will be organically looked against the background of any interior (perhaps it will become its highlight). Made such "smart" homemade houses for the house in minutes. In more detail about all stages, we will tell you a little lower.

So, how to make homemade hours do it yourself? To begin with, you will need to prepare the appropriate materials - CD / DVD CD (the design of its front part is chosen at its discretion) and the cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the latter item does not have any chips and scratches. To facilitate the work, you can purchase ready-made clock and then simply replace the standard dial.

Must be a shooter, otherwise the homemade will not work. You should also make numbers. Their total of twelve pieces should be. It can be cardboard, paper, or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of skin or tissue and superchalter type "moment". The main all this design will be the CD. We will redo it in the first place.

First you need to place the disk on twelve equal parts and glue the numbers to the marked points. At the same time, the sectors should not go beyond the outer diameter of the device. How are homemakes are made for home? After the sectors, proceed to the hour yourself - remove the arrows and place them exactly in the center of our disk. By the way, in front of their fastening, you can stick some interesting photo on the disk, which will make the design of the clock even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue on them and gently arrange the item exactly along the entire surface of the filling elements. The same shooter mechanism is attached to the back of the disk.

What to do next?

So, the base of the clock is practically ready. The next step is to do the holes in the device along the contour of the shooter. The field of this disk is installed in the case. The mechanism itself is displayed out through the hole and closes tightly. Now, with the help of wire, the stop is made, which is glued to the back cover. So that it is more durable, rushing a piece of fabric or skin on top of it. It will make the emphasis not only strong, but also beautiful, since the extra part of the wire no longer gaps on the clock as before. All, homemade hours from the CD successfully manufactured. It remains only to insert a battery of the AA type and set the time. By the way, the battery can also be made with your own hands.

How to make an energy source from lemon?

As we know, this fruit contains a lot of acid, respectively, with the correct actions, the lemon can be turned into a real mini-battery.

Of course, the charge from such a "battery" is not enough for the work of household appliances, however, for the operation or charging of the mobile phone of this current is enough.

We make homemade homemade - Preparing tools for transformation of lemon into a source of constant energy

During the work, you will need such tools like a knife, soldering iron, drill, iron pin, as well as several pieces of copper wire in isolation. Among other subjects, it should be noted the need for a single glass or a glass, a pair of wooden sticks and the same number of stationery buttons. And, of course, the main source of energy we will have lemon. An orange can also be applied, however, the acids in it are much smaller, so the charge will be minimal.

Instruction

First, lemon is cut in half. It is necessary so that it gives more acid necessary for lemon is fixed in the glass so that it does not ride on the table. Next in its pulp, copper and iron pins are inserted throughout the perimeter at a distance of 0.5-1 centimeter. "The minus" we will have an iron, but "plus" -med.

All pinways are attached to the wires of the wire. They will perform the function of the power supply connector. All items are connected sequentially.

At the final stage, sticks are inserted into the battery compartment. It is important here to observe the polarity. Contacts are pressed against the contact group. The container remains open throughout the device charge process.

So, we found out how to make useful homemade for home with your own hands. Successes in your endeavors!

Homemade for the house is small popular among urban residents.

After all, today the market of all sorts of goods is represented by the broadest assortment, among which it is easy to choose something suitable for themselves.

However, in order not to spend the extra amounts of money for trifles, as well as to improve their own skills of skills, you can create all these items with your own hands.

Among useful homemakes for the house can be found as such:

• designer elements that will fit into your interior in the best way, because you will create them, pushing out our own wishes;
• household items that you no longer have to buy in the store;
• homemade for home will be decorated for the appearance of the apartment or.

Homemade for home

Homemade with their own hands can be the most different. From beauty to practicality in their development there may be one step, and that proof is an interesting shelves from cruel cans from coffee. For such a craft you need:

• several tin jars (at least 6 pieces);
• glue;
• drill or other tools that can be done by holes in banks.

We begin the creation of a homemade shelf from the hardening. On the back (day) of each jar, you need to make an opening that serves as a fastener to the wall.

However, do not necessarily do in every bank on the hole, but if your regiment has large sizes, there must be at least 2.

Instead of glue, you can use the drill and drill in each jar in the hole, which are bred by nuts and screws with each other, but with glue, of course, it is easier to work.

To the homemade for the home unexpectedly did not fall apart, already on the wall, it should be used very durable glue, for example, the one that is used in the repair of shoes. Can consist not only of tin cans, but also from glass.

Glass cans can become a useful homemade homemade for storing small things.

Useful homemade home - house for a cat

If there is an animal in your house, and somewhere in the storeroom or the old monitor dust, which is no longer working for a long time, either will never be used, you can quickly make a house house from it.

To do this, it is enough to simply unwind screws from the device, remove the body and separate it from the insides, including the screen. Next, we connect the details of the housing with the same screws, thoroughly wipe the monitor from dust and proceed with decorating.

As an ornament for a cat house, you can take the usual paint, which covers the entire surface of the house you created. But there is another way: take watercolor paints and show off the former monitor with patterns at its discretion.

Hanger - homemade with your own buttons

For seed hairs, we need:

• buttons for homemade;
• aerosol paint;
• super glue;
• hanger.

You can cover the hanger with a cloth and sew buttons on the fabric, looks too beautiful enough.

Thread hangers

It is the hanger itself. You need dense threads that you wrap the hanger and get a wonderful homemade home made by your own hands.

To secure the threads, add glue PVA on the hanger.

All homemade homemade is very helpful, as they give a new life to old things and make beauty and creativity into your home.

The exceptional positive results of regular visits to the baths are known to everyone, but there are little attention on the variety of bath accessories. And in vain. Properly chosen broom will help bring the body's body. For example, brooms from linden are soothered, and colds prevent colds from fir.

Almost every second owner of a country estate eventually makes a decision to build an artificial reservoir at the local area. And this is not surprising at all, because the crystal clear water that shifts from the sun's rays allows to relax and get a lot of pleasure from staying at the cottage.

Dream catcher - Talisman Indian tribes, protecting people from evil spirits. Initially, he was a complex weaving from coarse fibers, hair and threads that were placed around a java ring with colored feathers.

Chairs bags or any other furniture similar type is a popular element of the interior of rest rooms, zones of waiting, reading rooms and cinemas. Frameless furniture is perfectly obtained to create design projects in kindergartens or individual development schools.

Generations of people have always changed each other, but the children of the modern world differ significantly from the previous ones. Despite the established stereotypes that the new generation leads something bad, the generation of NEXT is gifted children.

Any curtain will look much more graceful and more careful if you pick up suitable pickups for it. They can be performed from various materials for any interior style. Therefore, it is possible to pick up suitable in the furniture store or do yourself. The choice of curtains and pickups to them in stores is very large, the prices for them can also be different, depending on the fabric and the fittings used.

To all those who like to make an independently, this article will be very busy and interesting for reading. Let's talk about how to proper furniture. It is necessary to say it immediately, not easy, but still, if you attach your hardworking, zeal and fantasy to it, then everything will be successful.

A competently designed project and properly selected building materials are able to turn the staircase with a turn to the home decoration and provide access to the second floor. The constructed magazine staircase will be appropriate in any interior and will significantly save space.

Water is a substance without which life on Earth would be impossible. It is used every day, and in large quantities and for different purposes. In addition to ordinary household needs, water is also able to provide special aesthetic joy. For example, you can go fishing, on the sea or on a picturesque lake somewhere in the mountains.

According to the results of many experiments, it can be seen that the personnel production of unique and non-standard souvenirs is very exciting and interesting work. It contributes to the development of flexible thinking, creative taste and aesthetic imagination.

Participation in such a cognitive process can even with small kids, because the manufacture of crafts from the subwoofers does with their own hands for a long time, even not perpetual and not very obedient guys.

For the manufacture uses any materials of natural and artificial origin. After all, the healthy raw materials are always available and does not require any wretched.

And the masterpieces, which are made with no longer necessary, or not suitable materials, are fully competitive with store analogues, as they have no analogues. Such products, organically fit into any interior, which will add to him an exquisite originality.

What crafts can be made of girlfriend

• a variety of photo frames;
• stands for hot cups;
• many different toys;
• scenery for every taste and color;
• keys holders;
• original souvenirs in quilling technique;
• different candlesticks;
• skillful crafts for flower beds and garden plot;
• designer suits and dresses for matinees;
• registration platform for children;
• elegant scenery flowers;
• interesting decorations;
• and many other diverse designer masterpieces.

To make it easier to make souvenirs with your own hands, a photo of crafts from undergraduates that can be found in the worldwide network will help this. You do not need to copy, you only need to understand the technique of work and fulfill your own.

In the same principle that cards are made, it is possible to make a bright panel with paper and cardboard. But in this case, that the souvenir looks complete, it is also necessary to think about the frame that can be made with different material.

Instructions for crafts from girlfriend

Let us consider in more detail on the example of crafts from plastic bags - an air serpent that the kids like so much. For manufacture, it is necessary to prepare:

• 2 packages with polyethylene;
• 2 ships;
• scotch;
• black marker;
• scissors;
• leske, which can be seen with strong threads.

The process of creating a masterpiece:

Straighten the package and put ships on it, as if a cross, but the longitudinal should be third above, from the middle. Now, with the help of the marker, it is necessary to carry out lines, which connect the ends of the speakers.

Then, it is advisable to cut the figure what happened. Scotch tape shrinks to the package.

From the second polyethylene package, you need to cut a piece, in a width of 4-5 cm, any length - for the tail of the snake. It is possible to make a tail from a few short pieces of packages, having previously combined them with tape. After that, you should bind the tail to the lower half of the volatile snake.

At the end, it is necessary to make a hole in place, where the spats are crossed, and reliably tie the line there. Ready!

Step-by-step manufacturers for beginners

For the work of the crafts - the goose from the kinder-eggs, you will need:

• yellow testicles with kinders;
• buttons: 1 for nasal, 1 for the tail and 2 for the eyes;
• ribbon;
• awl;
• elastic thread;
• glue.

The process of creating a masterpiece:

Preheated tille, all eggs are pierced, one opposite hole.

Then there is a rubber band from the tail to the head. Next, it is necessary to put a button-nose and turn the gum in the opposite direction, through another hole.

Since both ends of the thread appear in the tail, it is advisable to fasten them using a button. Now you need to glue the eyes and strengthen the goal, which is on the pitch of the caterpillars. Thus, it is possible to make a whole family of such caterpillars.

Master classes on crafts from girlfriend

For the cardboard Christmas tree you need to cook:

• cardboard;
• glue;
• scotch;
• paints, markers, pencils;
• scissors;
• sequins, stickers, or something else - for decorations.

The process of creating a masterpiece:

Cardboard must be folded in half and cut where it bends. Halves that came out, again bended in half.

On one part, from the opposite side of the fold, half the Christmas tree is drawn.

Sheets fold together and cut on the drawn line; So two identical Christmas trees are obtained. Then you need to hidely mark the middleings of both ends.

On one Christmas tree, there is an incision from the tops to the middle of the midline, and on the second - from the bottom to the middle. Now, it is advisable to insert Christmas trees in cuts, and one magnificent tree is obtained.

For greater stability of the Christmas tree, the scotch is used - both halves are glued.

To decorate the Christmas tree, pencils, markers, sequins, paints, etc. are used. At this stage, everything is done that only prompts the imagination.

Conclusion

Every parent, who loving his child, sooner or later thinks that the baby is useful to do at least something, with his own small handms.

After all, the kids are more and more gadgets, and real fascinating classes have a much higher value. That's why the manufacture of crafts from undergraduates will become an ideal occupation for kids and adults.

Photo of crafts from girlfriend

The summer cottage is the territory where it is possible to give itself freedom to carry out numerous experiments and torturing. This is manifested not only in the interior design, but mainly in the design of the garden or the garden. The inventive and ingenious hosts are not long been guided by expensive and standard methods for the arrangement of their sites, since there is a lot of alternative solutions in fact for all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Non-standard designs are an excellent opportunity to create an interesting garden design, garden, cottage plot.

This variety of beds in most cases is used to grow decorative plants or spicy herbs.

Materials for manufacture:

The length of the drainage tubes is regulated in accordance with the wishes of the landlord. However, it should not be made bulky beds, because they may complicate movement on the territory.

Creating a garden

Stage 1. Create a container. To do this, we take the drainage pipe, cut down along and put on two sides with special plugs.

Stage 2. We take prepared metal holders, put them on the resulting carcasters for the beds.

Stage 3. We do in the pipe hole. They are made in those places where metal fasteners will be.

Stage 4. Delighted through the cable holes made or durable rope.

Stage 5. Fix the cable / rope with fasteners.

Step 6. Fill out the seeds obtained by clay and soil.

Stage 7. Look at the garden beds.

Stage 8. Let the pipes to the selected place. Sometimes there is a special wooden crossbar for this, or rather the design in the form of the letter "P".

Stage 9. Alternatively, you can make a special design for pipes.

Important! The gardening from the drainage tubes is not distinguished by resistant to a strong impetuous wind, so it should be selected for it, which is not blown away from four sides by the winds. Otherwise, the frame quickly collapses, with all your efforts.

The garden, made of a plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting outwardly. You can make such a bed in a couple of hours.

Materials for manufacture:

• durable polyethylene film;
• sewing machine;
• priming;
• seedling.

In order for the garden to turn out to be strong, it is recommended to pay special attention to the thickness of the polyethylene film, which in this case will act as "frame" design. The minimum film thickness is 0, 2 millimeters.

The process of creating a polyethylene bed

Step 1 . Cutting 2 rectangular segments of the film, the size of which corresponds to the size of the generated bed. For each side, you should leave the allowance equal to one and a half centimeters. The recommended bed diameter is twenty centimeters.

Step 2. We cross the rectangles among themselves, leaving unconceded only the top of the bag.

Step 3. Send a handle to the future bed, the strength of which will allow to withstand the weight of the bag filled with soil. It should also be considered that when watering the weight will increase.

Step 4. Fill the bag of fertilous land.

Step 5. Make horizontal cuts on a bag in twenty centimeters. They are needed in order to plant seedlings in bed.

Step 6. Space seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple actions, you can get cheap and useful beds.

An integral element of each country area is a compost pile. This is a place where all sorts of biochemical reactions occur, providing fertilizer creation.

To create fertilizers that will satisfy all requirements for them, you should thoroughly consider several key steps: creating a container and directly correctly manufacturing the most compost. We will tell about each of them.

Stage 1. We take eight reference columns of the same length.

Stage 2. Processing the bottom of the wooden columns by motor oil or tar.

Stage 3. Drop the columns to the ground so that they are reliable and stable. If the compost box is located next to the fence, then 4 columns (that is, one side) you can attach to the fence. This will avoid the need to dig 4 yams.

Stage 4. Between each two neighboring columns you feed the crossbars in such a way that in the end it turned out three independent sections. Be sure to leave the slots that will perform the functions for ventilation holes.

Stage 5. In two sections, horizontally nail the boards up to half the pillars height. In these places it is assumed to create two small doors.

Stage 6. The remaining section will be a large door, so you should navigate only one board. It should be located at the very bottom in a horizontal position, that is, as ordinary crossbar.

Step 7. Install the covers. To do this, you can use one large one-piece board.

Stage 8. Install the workpieces prepared in advance.

Stage 9. We provide doors with handles and leaks.

Stage 10. We process wood using special impregnations.

Stage 11. Color the box in any color that matches preferences.

Many gardeners mistakenly believe that any components can be hung in a compost bunch. In reality, "ingredients" should be carefully chosen to create the right biotrement.

Among the required components of the compost heap, the following components:

• peat;
• ash;
• needles;
• tree branches;
• leaves;
• hay or grass;
• wood ash;
• roots of plants;
• raw vegetables and fruits, etc.

All items in randomly mixed in a heap. To accelerate chemical reactions, it is recommended to cover a bunch of tarpaulos (this is especially true in the absence of a box).

A trip to the cottage with the family suggests the presence of entertainment elements on the site that will delight children. The most common way to take young dachensons are swing.

To build a swing on your own - the task is not easy, but quite perfect. Of course, you can always take a stick, tie it with a rope and hang the design on a tree, but it is difficult to call full swings. Real craftsmen prefer to build comfortable designs with a comfortable seat for seating.

Constructive components:

• two logs;
• durable rope.

Indicators:

• log diameter - 85 mm;
• length logs - 700 mm;
• distance between ropes - 500 mm.

Creating a swing

Stage 1. Extend the ropes between the logs.

Stage 2. Watch the ropes each log.

Stage 3. We release the rope out.

Stage 4. Tighten the ropes on 3 nodes.

Stage 5. Fix the swing on the tree.

Important: Such swings are calculated only per person.

Garden Material Garden

There are several types of garden tracks that can easily be done with their own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Will withdraw the space with corrugated stripes.

Step 4. Color the paint path.

Step 5. Sprinkle a stone crumb.

This is an economical option for those who do not want to break their heads and spend time on a full-fledged garden path. The tire track is usually used for gardens, as it is easily fit into the ground.

Stage 1. Drag the plugs in different colors.

Stage 2. Dump a small trench.

Stage 3. Drive support to strengthen the future track.

Stage 4. Construct formwork using boards.

Stage 5. Install the struts on the edges of the trench.

Stage 6. We put in the ridge of the trench crushed stone and carefully tamper.

Stage 7. We make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press the traffic jams in an arbitrary order. It is interesting to watch even colorful stripes.

These are the most simple and rapid ways to make a garden track, not acquiring expensive materials.

Tools do it yourself

The expression "in the farm will use everything" turns out to be more relevant when it comes to canices. From this plastic container, you can make a large number of indispensable tools that are actively used in the process of dacha.

For the manufacture of this tool, we need only a sharp knife and directly container.

Stage 1. Cut the bottom of the canister.

Stage 2. We note on the container the cut line for the scoop so that the knob from the canister is a handle of the future tool.

Stage 3. Cut off the extra material.

Due to these simple actions, we get a great scoop with a comfortable handle.

Materials:

Manufacture

Stage 1. Carefully my canister so that there is no smell in it.

Stage 2. Cut the vertically to the canister into two parts.

Stage 3. On the table, we make a groove using a woodworking machine.

Stage 4. We apply glue to the Faneur and insert the canister into the lower part.

Stage 5. Color the resulting shelf with a canister.

Of course, such a design will not withstand greater weight, but it is quite good to store small parts.

Materials:

• 40 kanisters;
• scissors;
• rope;
• paper;
• marker.

Stage 1. I pierce the top of the canister.

Stage 2. We make stencils from paper.

Stage 3. Apply it to the canister, we supply the marker.

Stage 4. Cut large holes with scissors.

Stage 5. We fold the prepared canisters into several rows, taking each row by waying the rope under the tank handle.

Stage 6. We reinstall all the rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to lean to the wall, then weiss it to the surface.

Stage 8. We put heavy items in the lower row - stones or bricks.

The result is quite a spacious and functional rack that will help get rid of the question of storing many small details.

Be destroyed and bold in the incarnation of your ideas. Good luck!

Video - homemade for giving with their own hands

Video - do ourselves for giving