Fur braid on the steering wheel how to flash. Learning to make beautiful seams. Leather Power Planting

The steering wheel in the cabin is probably the most vulnerable part. It is most often exposed to pushing, stroking and even shocks. To be more conveniently managed by "Barank" to be more conveniently managed and maintain it safe and preservation, it is better to wear a fever. Safety of motion depends on the quality of the cover for the steering wheel. You can buy in any store, but whether it is suitable in size or color. You can do it easier to order a tailoring of the product in special workshops, but it will be very expensive. But there is also the third option - to sew a cover on the car's wheel hand.

Advantages of self-sewing cover on the steering wheel

If you need a pole for the steering wheel, you can make it yourself, using your hidden potential. Some probably will be surprised for what it is so complicated, because it is much easier to order it from masters who have experience in the manufacture of such products. The cover on the steering wheel will cost it cheaper. In fact, the car owner will pay only for the materials, and the manufacturing technology can be mastered enough.

The material from which the period is made can be chosen independently and make, for example, a fur case on the steering wheel, which will give a car dealership a little comfort and softness. More leather and leatherette are in demand. Thanks to its properties, they serve for a long time and create in the effect of completion.

Make a leather laptop on the steering wheel with your own hands is not so difficult, as it seems. The most difficult in the sewing process will end when you need to properly arrange the seams so that the product is spread. An independent tailoring of the cover on the steering wheel can also save time. In the workshop can be a queue and is not known how much will have to wait.

How to sew case on the steering wheel do it yourself

The car owner, who decided, must consistently perform three steps. First, make the pattern of the product, secondly, to connect all its parts to make the basis in the form of a circle, thirdly, dressing it on the steering wheel, pull and consolidate.

With your own hands to sew a cover on the steering wheel, just how to say the word "yes", if you do everything in consistently. First, the pattern is made with the help of fir-handed items. To do this, it is necessary to wind the steering wheel of the food film, and on top of a painting scotch. It turns out like a shell. Tows on top of it marker, labels are applied, where the elements of the pattern will be sewn: areas next to the knitting needles and the inner circle of the steering wheel. Then the "shell" is cut by a stationery knife for drawn tags and removed.

The pattern is not fully straightened, but to transfer it to the paper first on paper, and then it is not difficult for the material. At the edges of the outlined contour of the element, it is necessary to add 1-2 centimeters to process the seams. , you need to take into account their texture. For example, a fur strip will be made from a material that does not stretch at all, unlike the skin. If there is not enough laid centimeters for the seam, it will be difficult for it and fasten.

At the second stage, it is necessary to carefully braid all the elements so that the form of the circle is. Stitching is better to do with superproof synthetic threads. The resulting product must be put on the steering wheel, pulling along the outside and wrapping the material inside the rim. So trying on the case on the car's wheel, made with your own hands.

Before bonding a fever, you must first wear it, try to pull and cut off the extra flaps if they are found. If the sewn patterns approached in size, then at the last stage you just need to lace a cover on the steering wheel exactly as shoes are corded. Using the needle, the thread is in the stitch stitch, in advance made on the sewing machine.

There is a dozen seams with which the nepheet is fixed. The most common one is seam macrame. He beautifully decorates the places of tissue joints and prevents the spread of the cover due to its unusual plexus.

Publishing how to make a cover on the steering wheel, you can use another one of the proven options. Purchase a kit for sewing, which includes needles, threads, scissors and material that is pre-selected when purchasing. Most often, car owners choose corrugated skin of classic black color.

Features of having steering wheel

Having understood with the fact that you need to immediately learn some features of self-sewing. Before proceeding with the pattern, the steering wheel must be removed to be more convenient to clean it with a film and shook with painting scotch.

A fur neckline on the steering wheel has a less stretched texture, so when working with such a material you need to consider an additional 1-2 cm for seams. Otherwise, it is simply impossible to pull the overall. The fur case is the same as the leather, creates a certain aesthetics in the showroom, its manufacture should be as neat as possible.

Recommending how to wear a cover on the steering wheel, you need to turn it correctly by choosing a suitable seam for this. The problem may occur in those who, in principle, did not hold the thread and needle in their hands. In the independent sewing of the novel, you need tremendous patience.

To disassemble how to sew a cover on the steering wheel is easy. It is necessary to determine what material there will be a hauling of the steering wheel, stock patience and proceed to work. Owing on the steering wheel Case made by her own hands, every driver can rightly be proud of his creation, while decently saving on a purchased model or order in specialized workshops.

Imagine that you decided to upgrade your car's salon. The covers for seats made of genuine leather, pulled the front panel, ceiling, doors, and even the handle of the gearbox. But your new interior will look unfinished until you change the appearance of the steering wheel. The easiest and fastest way to do it is to wear a steering fell.

What is needed for steering

Surely you have more than once asked: And why do you need a neglection, if the steering wheel can be just painted in the desired color? To begin with, it performs a decorative function. You can choose the appropriate material and color gamut and refresh the car's interior. There is a napkin and other useful functions. For example, it increases the thickness of the steering wheel, making grip more convenient. The material under your hands will be soft, and in cold weather heavier than the original plastic steering wheel.

In addition, the pole protects the steering wheel itself from mechanical damage: scratches, chips, pulp. If the material has deteriorated during operation, the overtake is easy to remove and install a new one, while the steering wheel itself will have to restore long and carefully. If you got a used car, whose steering wheel can no longer boast the factory type, such a cover will help to hide all the flaws.

Another important feature: the pole will provide reliable grip between the surface of the steering wheel and your hands. Your palms do not slip at the time of controlling the car, and therefore travel will be safer.

The appearance of the steering wheel became much more expensive, it looks like on cars the class above. I would also like to especially note that the steering wheel became thicker, not so slippery, as before, and most importantly - now he is pleasant to the touch. In a word, pleased with what happened, including the price tag and ease of installation.
Arsenyhttps://www.drive2.ru/l/3031715/

Views

Choosing a fever on the steering wheel, you will face a large variety of materials. Among the most popular species can be allocated as follows:

natural and artificial leather feet;
fur strings;
wire shafts;
silicone linings;
poropolone covers.

As a separate category, useful benefits can be allocated: in addition to their basic functions, they have a number of additional benefits. These, for example, include covers on the heated steering wheel and massage linings. Consider each of the types of more.

Leather boobs

As we have already noted, the skin for the manufacture of feet is used both natural and artificial. Of course, genuine leather will be stronger, soft and pleasant to the touch than artificial. However, its price may be 3-4 times higher, which makes it inaccessible for a variety of motorists. As an artificial (it is also called ecocuses) and genuine leather have good performance. Such a material will not fill in the sun and will not swell from entering the moisture. He is not afraid of temperature differences.

Usually leather covers choose male representatives. This material looks solid and expensive, fits into the interior of any car. The leather case can become a good gift for the holiday.

When choosing such a fever, give preference to perforated skin. It is softer to the touch and better passes the air, creating a breathable effect.

Fur

The fur used for steering fells can also be artificial and natural. Natural fur is better retaining heat in cold weather. Although, if you do not ride in the cities of the Polar region, the artificial material will cope not worse. Often, when manufacturing covers, sheepskin is used.

Artificial fur with a long pile is often stained in bright colors, complement funny elements. The use of such a cover will be issued in the owner of the car with a cheerful and carefree personality. Such pants most often choose young women.

Braided covers

Wires from the wire covers are also called retro-fellows, because they were very popular in the middle of the last century. Now such pants use those who want to stylize their iron horse under the classic car of the times of the Soviet Union.

Wicker covers retain their main functions: protection of the steering wheel from damage and from scoring hands. At the same time, their price is much lower than that of leather and fur analogues. The most popular material for the manufacture of wicker covers is the usual wire with insulation, which is found in the garage almost everyone. Some craftsmen make nurses from hard and thin linen rods.

Wire lamp can be ordered in special workshops, and you can make it yourself using weaving schemes. Using different colors, you can create your own unique steering design.

Silicone and foam covers

Often, silicone or foam rubber is used for the manufacture of steering fever. Manufacturing technology helps to make covers from these materials inexpensive, but perfectly copier with all tasks. The color gamut of such feet is very diverse: you can meet both calm pastel shades and bright neon tones. Color pattern, and transparent silicone to protect your steering wheel, but will open its original appearance.

Useful benefits

The useful covelaces, as mentioned earlier, can be attributed to the heated raids. Material in their manufacture can be used any, but most often it is natural or eco-leave. It is enough to connect the wire from the cover to the cigarette lighter, and you are provided with additional heated palms.

Massage inserts on flaps are usually made of rubber. Special relief affects certain points on the palms, improves blood circulation, thereby preventing fatigue and pushing hands.

How to choose a fence on the steering wheel

By purchasing a fever, it is not enough to choose only the color and material. It is very important to determine the correct size and form of the part.

In size

The case must necessarily approach the steering wheel. If you choose too small, you will not be able to tighten it, and too big will be ugly hang and form folds. To find out the diameter of the steering wheel, use the meter ribbon.

The measured row of steering covers is represented by the following types:

S is the smallest size, suitable for steels with a diameter of 35 to 36 cm, is usually used on small machines, like an eye or Tavria;
M - the average size for steels of 37-38 cm, occurs on most modern foreign and domestic cars with the body type sedan, hatchback or electionback;
L is a large size, designed for steers, whose diameter is 39-40 cm;
XL - steering wheel diameter 41-43 cm, is usually found on UAZ and Gazelle cars
2XL - this size is found in some import trucks, the diameter of the steering wheel is 47-48 cm.
3XL - for steels with a diameter of 49 cm, occurs from domestic kamaz.

It will be more reliable if you manufacture a cover yourself or order it in a special workshop. Professionals will accurately measure the diameter of your steering wheel and prepare a hatch, ideally suitable in size.

On the brand and car model

To find out the diameter of your steering wheel, look at the instruction manual. In different models, the diameter may differ slightly. If you do not want to risk with a selection of a cover on the wheel room, use the finished solution: you can find special rags made by lecture for most popular cars. Whether in the search bar, the request indicating your model and choose from a variety of options proposed.

By purchasing a cover in this way, you can be sure that it will fit not only on the diameter of the steering wheel, but also in the thickness of the rim, as well as the arrangement of the spokes and buttons.

By sight

Everything is simple here: they determined the size and model, followed by the visual selection. First, decide on the material. Skin, fur or modern synthetic materials will create a fundamentally different image to you and your car. Think out the color gamut of the salon: if it completely covers the skin of black color, then the bright pink long fur will look ridiculous. If insertion inserts inserts of red, beige, blue or other contrasting shades in the trim, the steering wheel in a similar gamma will support the color solution.

How to make it yourself - instruction

If you do not want to spend money on ready-made pants, you can make it with your own hands. To do this, you will need a standard set of sewing accessories, the material itself for the nearest, pattern, as well as a little time and patience.

Materials and tools

First of all, prepare all the necessary materials and tools. These include:

selected material for a new case;
old case (if any);
food film;
malyary Scotch;
marker;
tailor chalk;
sharp tailoring scissors and stationery knife;
special threads for working with skin;
sewing machine suitable for working with leather (or for the material you choose);
glue.

The process of creating a cover for the steering wheel

The process of creating a steering wheel will differ depending on whether you are going to close the needle cover. If not, it will be much easier to make it.

Member tape measure two main parameters: the length of the circle of the steering wheel (future length of the product), as well as the circumference of the rim itself (future width of the product).
Based on these figures, cut the skin strip of the corresponding length and width. If you use the skin, which is characterized by high elasticity, retreat about 1 mm inside the part. This will allow better and tighten the resulting cover on the steering wheel.
Pull the detail with a sewing machine at a distance of about 3 mm from the edge on both sides.

If you want the cover to cover the needles, you need to make a pattern for the future pattern. This is done as follows.

Tightly wrap the steering wheel of the food film.
On top of the film, cover the greasy tape into several layers. It should cover the entire surface of the steering wheel, without gaps. Pay special attention to the knitting needles.
Marker Spend a line in the center of the inside of the rift of the steering wheel. Now you denote the place of the future seam. Divide the steering wheel on the sections from the knitting needles. If you wish, you can make only one seam - central, but in this case you will have to try to very much when lacing.
Stationery knife cut the greasy tape for the designated lines and remove it from the steering wheel. You got peculiar patterns.
Apply the resulting patterns to the involving side of the material from which the case will be made. With chalk gently transfer the contours, observing all the bends.
Cut the resulting item. If you use the skin, which is characterized by high elasticity, retreat about 1 mm inside the part. This will allow better and tighten the resulting cover on the steering wheel.
Pull the detail with a sewing machine at a distance of about 3 mm from the edge on both sides. If you wish, you can sew part of each other.
Melt the edges of the details with a thin layer of glue and fix on the steering wheel. If you did not stitch them earlier, watch the joints be invisible.

Making patterns for steering wheel

Sew a hatch with your own hands will be much easier if you already have an old case. All you need is to resort it on the seams and move the contours to the new material, and then cut, strain and put on the steering wheel.

How to wear and lace a fear

Now you have to wear and lace the resulting felling. This process will differ, although not drastically, depending on whether the cover suggests the closing of the helm of the helm.

Methods of installation on the steering wheel with the knitting needles and without them

The main difference is the need to dismantle the steering. If the length is not designed for the needles, you can fix it, leaving the steering wheel in your place. But to install a cover with a material for the spokes, you will have to remove the steering wheel with a regular way.

Before dismantling the steering wheel, do not forget to turn off the battery. If its housing contains a airbag, then leaving at least 5 minutes before starting to disassemble the steering wheel.

For sale there are one-piece covers that do not need to be launched. They wear on the top of the steering wheel, and then with an effort stretched onto the whole wheel. It is desirable that at the same time someone helped fixing the pad at the top. Otherwise she can slip. The edges of such a cover will clounce, and you will not have to spend precious time on the lacing.

If you made a fever with your own hands, or bought an option involving lacing, you will have to fix it yourself. It is quite a long, but absolutely simple process. You do not need to be able to sew and make beautiful stitches, because everything you need is already ready.

If your case is made of genuine leather, soak it in warm water for 15-20 minutes. This will increase the elasticity of the material.
Arm yourself with a sewing needle. It should not be especially thick, as you have to skip it under threads.
You will not need to calculate the material with a needle. Pay attention to the line you (or the manufacturer) made in paragraphs No. 3 and 7 of the instructions for making patterns. Skip the needle under stitches and tighten the material.
Start from the bottom of the steering wheel and move counterclockwise. It is most convenient to do the first screed at the beginning of one of the lower spokes.
Carefully straighten and slightly pull the material. Try to avoid folds and distortions.
Treat the entire seam in this way. On the spokes you will have to fix and turn the thread. You can estimate the required length and the number of threads in advance, measuring the distance between the knitting needles.
When the nepheet is fully fixed, scatter it again and dry it. After that, the material will make the steering wheel tightly.

If in some places it does not work perfectly stretch the skin, warm it up with a regular hairdryer. With increasing temperature, its elasticity increases.

She put on the steering wheel, put the seam in the center, began to understand the thread. I decided to sew through one, just looked like sheltered leather rudders on the machines from the plant. As a result, the hour and a half or two works and the steering wheel is ready. Threads still remained meter. Now it looks at all as a native, on the steering wheel all the village. The result is very pleased, the steering wheel has become more convenient and pleasant to the touch.
Tyoma Vorobyovhttps://www.drive2.ru/l/422671/

Video: Installing a strip on the steering wheel

Types of Rule Wheel Lace

Change the lamp is extremely harder than to cord boots. You can use threads to tone material. In this case, there is not a big difference, which method you will cord a fever. But if you want to give your Ruly an unusual look, use the threads of one or more contrasting colors. Bright threads can be used at the stage when the item is striking.

The screed of the patch can be made in several ways. Who is more convenient and nurser. I used the easiest thing when the thread is running in each seam, an igniting the outlet along the contour and tightening it on the like shoe lace. The thread was the same color, the decision is temporary - so I did not show off. For the future there were plans to use a red thread for a screed. But, for this, at least normal skin is needed + additional covering at least the automatic transmission lever. To finish the key elements did not differ from each other.
mAA.http://mysku.ru/blog/aliexpress/17827.html

Some lacing implies the simultaneous use of two needles with threads. Carefully read and select a scheme that suits you the most.

Macrame lacing looks rather unusual, therefore it is often used when fixing the steering wheel. The thread is running under stitch, stretches to the opposite side, and then passes under the stitch located one above. Thus, a diagonal lacing is obtained through each second stitch on both sides. The thread is tightly tightened and seam is formed.

Video: Soo Macrame

In order to make a lacing, called sports, it is necessary to start weaving the previous method, and before the final tie to put the second thread, which in the same way will pass under all missed stitches. Such a double macro and is considered a sports lacing.

There is a second version of the sports lacing. With it, only one thread is used, and it is done in each stitch, without skips. After tightening the seam looks very interesting.

Video: second velocity

And also there are ways of lacing, for which the initial line does not need. Thread holes are made through a special device. These seams include pigtails, tree and some others. Weaving schemes you can understand by studying the following image and video.

Video: Show "Yelochka"

Video: Show "Cross"

There is nothing complicated in the technique, there is nothing difficult, we cling to the needle first a loop on one side of the fever, then to another, then again on the first and so on. I first just "laid" a fever, and after everything "launched" has already stretched the thread. I did it for several reasons. Firstly, from the first site, it will not be possible to delay, because the opposite end of the pole is not fixed, and, secondly, since the scotch does not stick, the edges of the poles were very much walked along the steering wheel.
SC0RPI0N.http://mysku.ru/blog/aliexpress/34499.html

Remember that the sides of the material need to be pulled only after you skip the curning thread under all the necessary stitches. So the shaped seam will be even. In order for the result to be better, practice on the strip of the neck before putting it on the steering wheel. If you are satisfied, what the selected seam looks like, boldly install the case on the steering wheel.

Make a fever on the wheel of a car for almost anyone. If you do it for the first time, stop at the case without a spice. If you already have experience of having other details, you can choose more complex materials and methods. As for the lacing process, he takes more time than forces. If you or the manufacturer bothered in advance about the line on the details, everything that you have, it is to be trained under the stitches the thread so that you are moving your favorite costers. And the variety of seams and weaving will help make your steering wheel unlike others. And if you make a fever on the steering wheel so simple, then why not save on the services of automobile studies?

Hello, dear readers! Surely, many of you consider the car - not a luxury, but simply a means of movement, which should be without unnecessary features and frills. At least, such an assertion can often be heard in a circle of motorists, however, it is impossible to say whether it is true of reality, because what driver does not want to secure the most comfortable travel conditions, even if there are short distances.

At a minimum, this is manifested in the usual cleaning of the cabin and washing the body of the machine, and if there is also free money, then the fantasy can take off very high.

Quite often, the process of improvement concerns not only the "appearance" of the vehicle, but also its internal contents, which includes car interior items. One of the most notable and frequently used such objects has a steering wheel. Therefore, it is not surprising that first of all it is considered as an object for modernization, but about how it is possible to do this, we will tell you today.

1. Leather steering braid - Comfort and beauty combination

Agree, we are accustomed to see the leather braid (cover on the steering wheel) in the salons of expensive foreign cars, and, in addition to it, leather seats and the pebble of almost the entire internal body space are usually coming.

Naturally, the first thought in mind, after such a spectacle there is a price issue. Yes, it is really not suiced, but still, it is not worth loaning at cost, because it is just a stereotype: since the leather interior, it means a dear foreign car. In modern reality, there is a mass of substitutes that distinguish from the present material is very difficult and if you only care for aesthetics, then this option is simply wonderful suitable for owners of any car, no matter what is new or old.

In the case of a braid steering wheel, genuine leather will not only help decorate this car item, but will also add a couple of positive moments into the quality control quality. The fact is that the leather covering, unlike the plastic, is capable of passing the air and moisture (the drops will not accumulate on the surface of the steering wheel), and this will help to avoid slip, if your hands suddenly stand back. In winter, thanks to the leather coating, the steering wheel becomes warmer and pleasant to the touch, since this material is better preserved heat. Strengthen this effect is not a problem, it is worth just to buy a braid with perforated leather.

I think, no one will argue that keep the wheel covered with skin in their hands - much more pleasant than any other material, in particular plastic (soft skin helps to avoid the appearance of corns from constant contact with solid and inconvenient material). However, there are some drawbacks in this accessory. First of all, it requires significantly more attention in terms of care and if you want this detail of the interior of the car for a long time, always having a presentable look, you will have to stock special means.

Using them for regularly wiping the surface of the leather braid, you thereby protect it from drying out, which contributes to more rapid wear and the appearance of cracks. In principle, instead of special. Funds for these purposes are suitable for other liquids that have alcohol in their composition, and if they are not at hand, then in the extreme case, you can use conventional wet napkins, the main thing that the material would not have lack of moisture.

With proper operation and proper care, leather braid can last up to 5 years, after which the material, nevertheless, have to be replaced with a new one. Currently, the range of this product is just huge. Manufacturers, depending on the color, design and style, are offered various leather braid options. You can choose a model for those who prefer a classic strict style (in addition to lacing), as well as for those who are interesting sports or more glamorous notes in the design of the vehicle salon. Usually, such a leather case is sold complete with all the materials you need (laces, threads, buttons and instructions with a detailed description of the installation process), so if you decide to buy a similar accessory, you will not have any problems with these problems.

2. How to make a fever on the steering wheel with your own hands?

In the case when for some reason, you could not choose to choose the appropriate model of the braid (did not like the color, style, design, no desired size or just want something extraordinary), it is quite realistic to make it yourself. First, shared with the color and texture of the leather material. The most optimal option, in this regard, is perforated leather, which is a softer and elastic material, and it is easier to work with it than smooth. True, the latter is at least susceptible to rapid wear. Skin thickness should be chosen from 1.2 to 1.4 mm.

And so, for work you will need: a piece of good leather material, threads, needles, scissors, and ... Exposure, especially if before, it was not particularly sewing. Before starting work, the steering wheel is better to remove, but considering the complexity of this process, it can be limited to dismantling interfering parts (for example, adjustment buttons or airbags). Before performing these actions Before Disconnect the battery.

Like any other sewing, the creation of a leather braid on the steering wheel will not cost without the design of the pattern. It is easy to make it, it is necessary only to cover the steering wheel with a food film, winding up the paper tape from above (you can use a painting tape) and draw the seam marker on it, then cutting the design on the applied markup. For cutting, it is best to use a sharp stationery knife, which will cut, and not tear tape and film. As a result of the actions, you should have at least three pieces of the stencil (all these parts should be numbered, so that then it will not encounter with the consequences of the wrong sequence of stitching).

Next, we take them and apply to a dense cardboard or other thick paper, we supply the marker and cut out the pattern, leaving 5 mm on the seams on each side on the seams (whatever the material is able to stretch better, leave 3 mm in places of skin). Note! When the developed layout will be transferred directly to the skin, when marking on the material on the sides it will be necessary to add 1.5-1.7 cm.After all these actions, all the parts obtained are applied to the steering wheel and check whether everything coincides, cutting off the extra parts before the mark. If all is well, then all the details are folded in the desired order and stitched.

When crossing pieces between themselves, it is better to use a sewing machine and synthetic threads (better categorous), the seams are then obtained smoother, more clearly and most longer serves. In addition, such a seam will simplify the task of tightening the finished braid on the steering wheel, since the loop openings will be ready. Of course, it is possible to try to do it manually, but in this case the process will not be so easy, as it may seem at first glance, therefore, it is worth first to practice on a cheaper material (leatherette) and if everything works out, then with a clean conscience to move to the skin . If the result of "training" did not meet your expectations, it may be better to use the help of the staff of the nearest atelier.

3. What is the quality of the result dependead?

A positive result of any work is a combination of all successful stages. This statement concerns and creating a steering braid. What is finally ensured in the correctness of all previously completed actions, the general "fitting" of the product should be implemented, then fix it on the steering wheel. Ie, the last stage will be the immediate handleka steering wheel.

Remember! From your patience, accuracy and scrupulsiness in this matter, the quality of all work depends largely. Conduct the steering wheel as follows. To begin with, we apply the pieces of the billet to the steering wheel together, following what they are set to symmetrically (you need to focus on the inner side of the steering wheel). Then the steering wheel, above the seams, connecting individual parts are marked with a marker.

Also, if you do not want that the seams would perform, you can do in them deepening, but after that you will have to constantly use the braid, since without it the steering wheel will become completely unattractive and shapers. The next step is the lacing of the leather braid, which is carried out by analogy with the lancement of the boot, only the thread, in this case, is in the loop of the seams on different sides of the product.

Tip! If the braid stuck to the steering wheel is not tight enough, then to avoid scrolling, it is necessary to strengthen it, the thin layer of epoxy resin applied to the steering wheel.

In addition to the absorption, you can still fix the product with a firmware method, taking into account the material thickness (skin). If it is not thick enough, the braid can be broken into parts. Do not try to tighten the thread from the first time, I better doing a few loops selected in advance, go back then back and tighten the first loop. So, sticking to the specified tempo, move on.

If the skin is hard and badly calcined, you can slightly moisten it with water, thereby increasing elasticity. However, when drying it, it is rented back, and this can not be taken into account, since after a dense stitching, the dried product can crack. When the braid is fully pulled, all the elements taken earlier are installed on the previous place. Now, you can evaluate your new leather steering wheel.

Taking some experience in this business lay out the algorithm in relation to our restyled steering wheel.

First remove the steering wheel from the car, here it is. On it we celebrate a white pencil seam places docking parts of the skin

Cutting the groove so that the seams are then cut into them, it is scary to cut, but you need to do it badly, so that it was good

wind the food transparent film - it is a sublayer for the future pattern

purchase all painting tape it is the basis of the pattern

Draw on the pattern where the seams will pass

Cut the seams on the lines.

carry the pattern on the skin

After cutting out the skin for stitching the ring for fitting on the steering wheel, yes, before applying the pattern, it is necessary to take into account the direction of the stretching of the skin, so that the braid is not stretched along the tape, and across the opposite.
Stitch parts on this important so that the machine cleaned the sewing tie 5 mm

we try, pay attention to the fact that the seams exactly fall into the cuts in the bubble

Upon fitting, we carry out the dotted lines of the seams with the steering wheel on the subject of exact coincidence and the allowance of the skin while tagging on the steering wheel, if everything is fine, we flash and cut the allowance, we are tightened.
When the ring from the skin is stitched and the diameter is adjusted, it is important that the dotted lines ie the stamps line coincide with the inner edge of the steering wheel "such a tubercle from which at the plant is removed" with a streamer, in a free state with a slit 3-4mm

At the screed, shules are detected with seams in the field of steering wheel, so you have to break the machine seam and restore, threads after the machine must be left with a reserve.

Here is a map of the seams from one of Tunig Atelier.
the first 5 seams are made using a sewing machine, that is, straight, the line is tightened with a thread, and from 6 and further- in manual

That's all ready, write it easier to do.
Work is performed in one day.
Materials: automotive skin 0.4 kV / m-350rub
threads 150l Lafsan- Others are not suitable weak,
sewing machine for seams such as Macrame or Sport, like me,
it is possible without it, if the seam is a pigtail, like on the Japanese.
much perseverance and desire to achieve results.

In addition to the design element of the car, the braid for the steering wheel made of genuine leather has a number of other useful qualities. First, such a leather case is always "warmer" of the plastic surface of the steering wheel or covers from synthetic materials. Secondly, the thickness of the steering wheel increases, which reduces the fatigue of the fingers.

The steering wheel is completely easy to make it yourself. You can not buy the skin in the store, it is enough to disassemble an old leather jacket or a bag, carve three pieces with a size of 40 cm per 9 cm and sew them together. The leather lacing can be cut into spirals, which will significantly reduce the skin consumption for the manufacture of the cover.

Initially, you need to measure the diameter of the steering wheel and its thickness. The length of the braid can be calculated by the formula from the course of geometry for grade 7 (2PR) or measure a centimeter tape. The average value of the braid length for the steering wheel of the passenger car is within 120 cm, and the tight of the steering wheel girth is approximately 9cm. But since you will sew yourself, then do not hurry to sew all parts of the cover in a circle at once. It is better to fit the cover on the steering wheel before making the last seam, cut extra centimeters, then it will be tightly sitting on the steering wheel, with a slight tension, which is desirable for such a tensile material as genuine leather.

In addition to the skin, you will need a blanket for holes and cords, approximately 2 - 3 meters long. Both can be bought in the store, especially since the pass is inexpensive, but you will come in handy more than once. You can make a narrow leather strip instead of a headband and use it not only to lace a cover, but also to decorate the surface of the braid. The cover with such a lacing will be significantly softer at the connection site, and its appearance will be more solid. About how to make a lacing from the skin, we will tell a little lower.

Since the steering braid should have at least one compound, we recommend immediately divided the total length into three equal sections of 40 cm (approximately). First, a long piece of leather (120cm) can be cut only from the whole skin. And secondly, the skin pieces can be combined, for example, two gray, one black or otherwise. You can even make 5-7 or more sectors, but this is already at your discretion.

You need to connect three or more covers in the sewing machine. Two layers of thin skin can easily flash any sewing machine. The only thing to pay attention to is to plant the upper layer. To reduce it to rise under the paw a narrow strip of newspaper or tracing. After the seam is made of paper can be easily removed.
See Skin Recommendations.

Another moment. Points on the wrong side need to be molded with rubber (or for the skin) glue and press for a few minutes. To the seam almost did not stand out, it is possible to knock on it with a hammer or handles of large metal scissors from the wrong side.

Connecting seam with the face of the braid can be decorated with decorative two lines, approximately 0.5 cm on each side of the connection line. But it is better not to do this, because the connection from this will not be stronger, and even on the contrary, the set of proof needles will weaken this section of the skin and with time the breaks can be formed in this place. It looks quite well the braid connection and without a finishing line (photo).

Jump holes for lacing with a blank. Choose the distance between them yourself, but consider which 1cm is too small, and 2 cm is a lot. Be sure to mark the layout of the holes with chalk (on the involving side) or helium pencil on the front side. Holes on both sides should be symmetrical, pair.
See braided belt with your own hands.

This scheme contains ways to perform a lacing. Choose any of them and first try it on the braid without a steering wheel and without tightening the cord. Then pull the braid on the steering wheel, placing the docking seams symmetrically. For example, one seam at the top two on the sides. By the way, the wheels need to put even that the steering wheel is exactly like with a straight movement.

The easiest way to perform the lacing is shown in this scheme. By the way, think about what you will start the cord in the holes of the braid. You can make a hook from the pin, you can buy a special needle with a big ear. In the store of sewing accessories, you can buy a special device for inventing fine gum, cords in a row, belt, etc.

Immediately do not tighten the lacing too much. It is better to do this when the entire cord or leather strip will be completely braided into the case. Then gradually tightening each stitch can be evenly and gently tighten the entire lacing.

Strips for lacing from the skin look on the steering wheel will be much more interesting in the cape cord. But for such a lacing will require 2-3 meters narrow leather strip. It is not always possible to carve them out of skin residues, especially if you make a braid of small pieces of skin. Then take advantage of these tips. Take the skin area in diameter 8-10 cm. Tie a helium handle to the needle (scotch). Put the edges in the center of this piece so that the pencil also concerned the skin surface. Start drawing a spiral with a pencil, combining the needle with an already painted by a spiral line. It will be a guide for the needles. Thus, you can carve out a rather long part of the lacing from a small piece of skin.

The width of the leather strip to perform the lacing must be at least 3-5mm.

5. Cord for wheel braid

Performing skin lacing has a number of technological difficulties. It is not enough that the lacing is quite difficult to cut perfectly smooth narrow stripes, and then need to be connected together.
In addition, it is quite difficult to stretch into the holes, and so that it does not turn inside out, which will rush into the eyes. After all, in genuine leather, the wrong side has not only a matte unprocessed surface, but also a completely different color.
Therefore, it is possible, much easier and easier for you to sew a braid for the steering wheel of two, three skin pieces, break through the holes, and the lace to perform the usual kapron cord under the skin color.

We offer you several ways, as quickly and just make a case for the phone with your hands from genuine leather.