Poles for the fence from Evrohstaper. Classic in the new version: Construction of a fence from Ershrester with their own hands. The advantages of the fence from the European

The technology of construction of obstacles is the property of developers. No secrets, everything is available and open! I installed the frame and mounted filling from a professional flooring or stakenist. However, any amateurness when installing the fence is excluded. Retreats from step-by-step instructions will not bring more pleasant minutes later. How not to take advantage of useful advice!

Ershtroker photo

We are obliged to manufacturers and manufacturers of stainless steel products on our territory of our habitat with a wide brand program - the companies of Belgian ArcelorMittal and German ThyssenKrupp. The manufacturer of the manufacture of steel sheets was taken for the manufacture of steel sheets served as an accelerator of creating a metal stakenist.

Metal europeneur is a product of cold-rolled steel galvanized high quality - professional flooring, opened by an industrial method for individual elements (lamellas) with a polymer coating.

Sectional fences harvested from EvroShtnika are distinguished from existing structures, combining metal strength, durability of the constructive and unpretentiousness. Metallic stakenik became in demand due to the unimpeded air movement in sites and original appearance.

The cost of the fence from the European service is acceptable to acquire lightweight lamellae and structures from steel galvanized with polymer coating and increased rigidity. We will not hide, many collect the fence from Ershrester and mount themselves.

Useful advice

Ershtage profile is varied - from a rectangular section to a semicircular. The dimensions of the slats are in width from 80 to 128 mm.

If the Ershrester for you is still Terra Incognito, then this video is by the way.

Types of eurgaste

There are erupter of one-sided or bilateral attachment. For one-way attachment, the placement of the rail or lamella chapels is one-row with a gap, the bilateral fastening provides a double-sided location of the rivers in a checker order. Let's tell us, the European passman (side A) and (B side b) are used for traditional firmware with a distance between the lamellas up to 40 mm. For bilateral firmware ("blinds") use the parties a and b with a displaced lamella installation.

To establish a fence from Ershtrokenik, it is recommended to prepare a frame and consolidate stakes using the mounting clip on the columns.

Installation technology for fence

Enlarged, the technology of the fence device consists of stages:

at the selected level platform, the future location of the support pillars is scheduled.
under the reference pillars dig or drill holes in the ground to 800 mm deep
produce the installation of reference pillars with the fill of the hole with a concrete mixture, for brick columns, the masonry is organized
on the supports in the mounting cage, the transverse lags are fastened, which are provided for installation
mounting the stakeholder and its fixing on horizontal lags
the profile metal poles are installed cap.

According to basic technology, you can install the fence in certain methods.

methods of construction of a metal fence

There are fundamentally distinguishing methods for the device for a stakeholder fence:

metal pillars
fence with decorative brick columns
metalstock on a ribbon foundation
barriers with brick columns on a monolithic foundation.

Any method is possible for its own installation. Let's tell me that experts consider the fence on metal pillars by the budget.

Fence from Evro sweeper do it yourself

The installation starts from the mounting of the supports that can be set in the following ways: a driving or forging into a bored hole and concreting.

poles for the fence from Evrohstaper

Installation of support pillars consider the fundamental event when creating a fence. Installation options are possible: * Metal poles for fence or brick.

Metal

For columns, profile pipes are used everywhere with a cross section of 60x60x2, 80x80x3 and 100x100x3 mm, as well as screw piles D76 and D89. In practice, preference gives repetitive pipes with a cross section of 80x80x3, able to withstand the weight of the stakenice at maximum load.

For fastening, the lamellas use transverse frame logs from the profile pipe 40x40x2 or 50x25x2mm. Fastening the pillars is made by a drill and stake. The bottom of the hole under the post is strengthened, after installing the pipes, we fall asleep with gravel and tamper. The fastening of each lamella of the stakenice is produced by 4 self-plugs - 2 on the upper and lower lags.

Useful advice

The selection of the cross-section of the profile pipe as the reference pillars must be confirmed by an approximate calculation, the initial data of which are the parameters of the overall length of the fence and the number of columns. The number of necessary lamellae is calculated by dividing the length of the fence on the width of the lamella, taking into account the width of the gap between the slats. For bilateral installation, the result obtained is doubled.

metal Stakenice Fastening Methods

There are several ways to horizontal and vertical fastening of a metal stakenist: using welding and using special fasteners and holders. Fasteners X-brackets allow you to fasten the lag horizontally on vertically mounted support pillars.

Step-by-step instruction

Step 1. Installation of bearing support pillars.

Step 2. Installation of transverse lag according to the estimated height and weight of the fence.

Step 3. Fastening Chatter

Step 4. Installing plugs on profile pipes.

The placement of the metal eurbate on metal poles is the most affordable way.

Useful tips on the installation of Evrivnika are shown here.

More time-consuming and costly consider the method of installation on a ribbon foundation, especially if brick poles are involved.

Brick

To install brick columns for the fence, it is necessary to build a formwork and the base under brickwork due to the solid weight of the entire design. Ribbon monolithic foundation will allow you to build fences with a height of up to 5 m, with a well-chosen pattern of Ershtroker, the fence has a presentable view.

Step-by-step instruction

Step 1. Marking of a plot for brick poles

Step 2. Digging of trench with sand and rubble

Step 3. Laying reinforcement and installation of support pillars with subsequent fill of the foundation concrete

Step 4. Bind of each reference pillar brick

Step 5. Installing the elements of fastening of transverse lag

Step 6. Cullen fastening Staketin.

Fastening the transverse lag for the installation of the stake on the brick poles and the supporting profile are produced on special brackets using dowels and self-tapping screws.

The device of the brick column for the fence is shown in the video.

Any owner of a private house or cottage prefers a durable and modern type of fence for its site, which will successfully fit into the local corner of nature. At the same time, the most important tasks with which you have to face in the selection of material: low price, practicality and reliability.

The most convenient option that meets all requests is the fence from Ershtroker's own hands. Similar to it wooden stakenik It has lower strength and shelf life, as well as requires constant care and staining.

Ershtroker opposite not only durable, easy to care, does not need to be processed by antiseptic, painting, but also retains a beautiful, aesthetic look. A significant advantage of such a fence is the simple design and the ability to quickly mount the fence with your own hands, which significantly reduces the cost and speeds up the whole process.

Galvanized steel fence is a more upgraded version of the metallic stakenice and is characterized by good purgeness, low weight, high fire resistance, long service life, optimal random indicators and strength resistant to corrosion.

For all the indicators, the fencing from the erupper is the best alternative to other types of fences and therefore deservedly became the most popular of all materials that many private sections and even cottages are decorated.

Types of eurgaste

Fence "Chess"

According to technological processing and production methods, several types of erershther are distinguished.

According to edge processing methods there is a stakenik (rack):
- with a spangled edge of the section; The rooted sections of the section increase strength and give a more attractive appearance of the product;
- with unenvocated. The product with non-spangled edges has a lower price, but not very attractive appearance.
By the method of manufacture distinguish:
- Processed rails. With the individual cutting of each part, to improve the quality of the product produced, each individual rail is treated on a rolling machine. Such processing eliminates the jar on the edges and increases the price of the finished product;
- Unprocessed rails. With mass production, the rail is cut from a solid professionalist. The ends of the stakenice do not pass machine processing, which reduces their quality and cost.
By method of staining:
- one-sided polymeric painting;
- two-sided polymer painting.

Powder staining provides plating on two sides the same, smooth paint layer. With one-sided staining, the back side remains matte, and the cost of the product is significantly reduced.

Options for a fence from Evrohstaper

Options are based on the form of the rail and come:

straight;
wave, step 50 mm;
wave, step 25 mm;
two waves;
with one-sided firmware, step between rails 40 mm, 18 pieces of lamellas on the span;
with bilateral firmware, step between slats 70 mm, 29 pieces of lamellas on the span;
in a checkerboard.

Options for fences from European, photo:

Stakenik with one-sided firmware.

Fencing from the stakenice with double-sided fierce

The fence from the European staggering order.

The cost of the fence

The average cost of one stakenaker's route meter depends on the method of processing, coloring, height, the installation method (independently or to order), the number of meters of the very fence, sizes of the stakenant (length - 50 cm - 3 m, width - 8 - 11 cm).

Depending on the width and length, the staketin on one-line meter of the fence may be required from 6 to 8 pieces. Depending on the type of material, the manufacturer's company varies the quality of the finished product, the height of the plank, the thickness of the coating.

Given all the factors the price ranges from 500 to 1000 rubles per meter mandaring fence. For the possible delivery to the remote region or in the city, the price of 25 to 30 rubles per kilometer.

Nuances selection of materials

The installation of the fence with your own hands is a responsible business, so when choosing a material for your fence, it is necessary to take into account all the advantages, a number of advantages, differences and varieties of the erupker.

The material should be very durable and rigid to withstand significant loads, surface pressure, the effects of a number of unfavorable conditions, including weather.

It is necessary to take into account the simplicity in the conditions of self-mounted fence. The stakenik, fixed by self-drawing, does not need additional fixing, so any damaged item is easy to replace independently.

The value of the stakenice is manifested in large designer capabilities that allow you to mount with your own hands with one and on both sides of the fence, as well as choose any color you like or a combination of several. If necessary, refresh the appearance of the design can be repainted in any other color.

In general, a rather large design is relatively low weight, which greatly facilitates the installation, transportation, installation, affects the quality and relatively low price.

High-quality material used in the production of Ershtroker - galvanized cold-rolled steel is well opposed to adverse weather influences and has a long service life about fifty years.

A large range when choosing sizes allows you to select the height of the fence, the gate is almost for every taste and requests (from half a meter to three meters of the length of the stakenice).

The most common form of racks of the P-shaped configuration, however, there are other known varieties: a direct P-shaped structure, an arcuate form with a bend inside and arcuate with a bend outward, triangular shape and in the form of a trapezium.

Instructions for independent production

Fence from Ershrester with their own hands is fast, efficient and convenient. But before starting work on installing the fence, it is necessary to clarify all the rules and norms taken in your area regarding the location and construction of the fence, so that it subsequently did not have to dismantle it. It is worth clarifying where the gas pipeline and municipal lines are passed to not damage them or not tan. To avoid, the risk of incorrect installation should carefully read the instructions developed by the manufacturer.

It is necessary to purchase the following materials for the installation of the fence: a cross-square slap (one span two pieces), a profile pipe (as intermediate columns), self-tapping screws, hardware, shovel, boring, roulette, measuring level, sledgehammer, drill, sand, rubbank , cement, primer and finishing paint.

Before starting the construction of a new fence, it is necessary to clear and place the perimeter of the land plot on which the installation will be made. From the site remove all unnecessary items, garbage and what will interfere. Installation of the fence with your own hands is performed in several stages:

At the first stage, make the markup of the length of the site, using the level, pegs, rope. The predetermined distance between the sections columns is chosen from 1.5 to 2 meters. Now that it is known how many sections and pillars will be easy to calculate the amount of materials required for operation. It is necessary to take into account the density of placing the rails and the distance of the gap between them. To obtain the required total number of materials for one section, the required total area is divided into two and multiplied by the number of sections.
Prepare poles for pillars. With the help of a shovel, manual or automatic gasoline drill in the ground, there are pins for pillars in a depth of 55 cm. If the fence of a large perimeter or during the cold season, the frozen soil, such a yamobur is indispensable in operation.
Bearing poles are installed in the prepared holes.. In the center of the deepening of the pit, the pipe is fixed in perpendicular position and a sledgehammer is driven down to 1.1 m. Then the crushed stone fall into the pit and the concrete is poured. To check the exact position of the installed pillar use the construction level. The procedure is repeated for each individual pillar.
When installing a crossbar, the lower fixed is 30 cm from the groundand upper 30 cm from the beginning of the design. The instructions describe the fastening of the transverse lag in detail. As a rule, the installation starts from the bottom lag, and its ends are inserted into the pillar lock rings. Start the installation from the first lower lag and gradually move up. The installation of the upper lags is produced later.
At the next stage, a stakenatnik is fixed with the bottom of the design on the crossbars. Rakes are fixed on an equal distance from each other - 4-5 cm. Since the panels from Ershrester are attached to transverse lag, they start from the lower crossbar, consistently approaching the central lag, and then the last part is installed on the upper log.
Using glue and screws, mount the stacked bar. Self-tapping screws should be included with the fence. But if you need to buy a self-sufficiency yourself, it is better to consult a specialist with the purpose of buying a high-quality tool. Sometimes glue uses for attachment.
Mounting the gate - the final installation stage. Before installing, the carrier poles are mounted for the subsequent attachment of the gate themselves. Install the gate, in accordance with the accompanying manufacturing instructions and pay attention to the details when setting the bracket, looping, latches.
After all ground all fence, and after a day, proceed to painting.

On the photo one-sided attachment from the plates of contrasting colors.

If you decide which fence is better suitable for the house or country phasenda, the Ershrester will not only perfectly fit into the natural landscape, but for many years will delight its modern, decent view and family, and all your neighbors.

Thanks to a large set of options for color gaps, constructive types of fence, you can make a choice for your taste and significantly transform, as well as emphasize the individuality of the appearance of your site. Practicality, reliability, availability in price made Ershtroker quite popular material not only from private owners, but also owners of office buildings.

Video instruction

Options for installing a fence from Ershrokel - on video. Material from the channel fence pro.

As for the advantages of the metallic stakenik (it is also called the "erupkener"), the advertisement is largely justified. Before dealing in the nuances of the construction of a fence from this product, it is necessary to understand that it represents.

By and large, these are metal stripes that have a protective layer of polymer compositions. There are no standards for their manufacture, but the most common samples with such linear parameters are most often: length - from 150 to 300, width - 10 (cm).

Consider the main varieties of "EurShtage", which is used to build fences:

According to the production technology:

Cutting sheets of professional flooring ().
Individual production of samples by rolling on the mill.

In the end parts:

Cropped.
Spilled (rounded).

By protective color:

One-sided.
Bilateral.

By material:

"Ocinovka".
Copper (value is very high).

Now it will become clearer how to build a fence from Ershtrokenik do it yourself.

Selection of materials

Naturally, the speech will first go about supports (pillars). Given the aesthetic attractiveness of the "EurShther", the choice is advisable to stop on metal blanks. What to use? Most often, the owners of the plots under the columns acquire a profile tube (with square cross section) or.

The last option is more convenient because it eliminates the need to perform a significant amount of earthworks. The total cost of such a fence will be cheaper, since building materials will not be needed (cement, crushed stone, PGS) for concreting of the opened parts of the supports.

As guides, the strip iron or the profile tube of a small cross section can be used. By the way, such lags are available. Their length is from 2 to 12 m, so it is easy to choose the required amount.

Marking of the territory

The distance between the columns is chosen depending on their height and the total design of the site. The recommended interval between them is about 1.8 m. When it is increased, there is a risk that the fence will "play".

Installation of support

Simple work - piles are screwed into the ground. If pipes are used, the wells are digged, after which the support is falling asleep with solid fractions (crushed stone, brick or concrete battle), the entire mass is rambling and poured with cement mortar. For the gate and gate, it is advisable to install "your own", personal pillars.

When using pipes, it is preferably to the bottom end to weld the metal plate. It will help more firmly fix the support in the soil.

In addition, you need to think about how to seal the upper ends of the pillars, otherwise water will begin to accumulate. Options - screwing mugs from metal, install plastic "plugs".

Fastening guides

Basic - two; One top, the other below (horizontally). If the fence is high enough, then in the center it is worth paving the third metal strip. It will perform the rigid rib function, since the metal stakenik itself has a small thickness and the mechanical exposure is deformed.

Guides are welded to supports, so they are previously aligned by level or level. Another question is at what height to position them? Typically, the bottom is attached to about half the meter from the soil, and the upper one is 25 cm below the top cutting of the fence. Although this is just an example, and the master produces installation, conforming to the specifics of work.

Prior to this stage, you should make marking of the guides and drill holes for fastening the fence planks.

Painting Karcas

Considering that the fence is located in the open sky, it is better to use paintworks with an acrylic basis. Previously all "iron" degreases and processed by primer. This ensures that the paint will fall smoothly and staying for a long time.

Installation Staketin

They are fixed by self-drawing. Considering their number, it is advisable to work. As the planks spread around the perimeter, the owner decides himself. But here you need to take into account the height of the fence and what is behind it. If the beds, then the gap between stakes is desirable to do more (it will cost about 1,150 rubles / mp). This will additionally increase the illumination of the adjacent territory. The installation of "deaf" fencing will require more metal slats, fasteners elements and will lead to an increase in the cost of the structure (up to 1 900 rubles / mp). Therefore, you need to choose the optimal option based on the specifics of the site.

Spare gate and wickets

How to do it depends on the design. Fastening loops or on bolts, or welding. If everything is done carefully, then such a fence will not require even cosmetic repairs of 25 years, at a minimum.

Useful tips:

If you allow financial opportunities, it makes sense to buy ready-made frameworks (lags + supports). The fastening of all elements is made by bolts.
To exclude damage to the protective layer of slats by self-drawing in the process of fixing the staketin, under the head of the fasteners elements you need to put plastic rings (gaskets). Moreover, the hardware is taken only galvanized.

It is completely easy to erect a fence from Evneshster, although in the process of performing work, certain skills will be required. By choosing the Ershtroker for the fence, you can safely protect the plot from extraneous penetration and transform it. However, before the start of construction, the fence is to familiarize themselves with important nuances and moments, which will be discussed in this material.

Fencing of a country house

It is worth noting that the Ershtroker is largely superior, although it is so understandable. However, still stands in detail on the features and advantages of this material to realize all the benefits of this choice:

Fences from this material are fairly easy to install, and in strength they are not inferior to many analogues. In addition, this material does not need periodic processing in order to extend its service life, as in the case of wood. The impact of moisture, the cold and the sun does not harm the European passman.
You can purchase this material of different colors, which will increase the aesthetics of the landscape. Also on sale there is a stakenat on a different form for the construction of the original fence for the cottage or at home. To give the original type during construction, you can lay stakeholders in a checker order. As a result, it turns out a design called "", which looks unusually and very original.
Simple installation and construction are provided by ease of material and other features. Installation of fence is carried out using welding or ordinary self-tapping screws. As a result, it turns out a fairly strong design, which looks rich.
Due to the ease of material, the bearing poles for the fence can be installed at a greater distance from each other. This will undoubtedly affect the cost of construction, of course, for the better.
Such a fence skips enough air and light, even if it comes to chess laying. This is a great option for building on the plot. In this case, the plants will receive a sufficient amount of sunlight and fresh air.

Beautiful hedge from Ershrokel with brick columns

The above description fully explains why this material is so big popular today.

Fencing of a private house

Preparatory work

Before starting any construction work, it is necessary to make marking and accurate calculations.

Before proceeding with the calculation of the value of the material, as well as its quantity, you must first determine:

what kind of installation of the boom from the erupteer will be selected;
at what distance from each other will be the Metal Planks of Ershtrokenik;
the frequency of the fence.

As a rule, metal strips are located with a small gap from each other.

However, you can choose the gap at your discretion. But at the same time it is necessary to observe one simple rule: the distance between should not exceed their widths.

Fence

Before starting construction, you need to determine the width of the spans. There are no strict restrictions on this issue. The width of the span each determines in different ways, however, it is necessary to observe symmetry.

Installation of the fence involves the use of the following materials and tools:

the shovel and the boring will help me out the trench for;
the self-tapping screw and the welding machine will help to establish a fence from Europropyl;
you will also need a high-quality screwdriver, guides and metal strips, hammer, roulette and so on.

Hedge and Gate from Ershrester

From materials will be required:

hollow tubes, the size of the cross section of which will be 60x60 mm, taking into account the ease of metal;
20x40 mm, which will be used to attach metal slats;
ershrester, the thickness and form of which are chosen individually, since for further construction these indicators practically do not play any role;
from which the wicket will be built;
paint, if the metal framework for the European officer is planned in the future in the future;
primer, cement, sand will be needed for.

The building materials market is growing and enriched with new and new types of products every year. With the development of technologies, materials are becoming more contemporary, and their advantages compared to competitive are indisputable. Among such products and the European serviceman.

EUROPEATER fence for a private house

What is so good the material where it can be used and how to use? Consider more.

Features of the material

Ershtroker is a metal sheets of a width of about 10-15 cm and a height from one and a half to three meters. The surface of the metal is galvanized and covered with a polymer composition to protect against the harmful effects of adverse environmental factors (rain, snow, frost, hail, fog).

It seems to be reminded, but has a number of benefits:

The wide possibilities of applying the material contribute to the rapid spread of the novelty among the owners of their own homes and various firms.

An example of the original fence for the cottage

The popularity of the stakeholder is only growing, so new colors and forms appear. If each section is manufactured separately, the material will cost more, but its quality will be significantly higher.

With a mass cutting of parts from one sheet, such defects may appear as burrs, jar and other small deformations.

Also can be different. If a powder method is used, each detail will be scratched uniformly on both sides. The one-sided version of the stakeholder is produced when the paint is processed only by the front side of the stakeholder, and the inner side remains matte-white.

Installation process technology

In the process of installing a fence from Ershtrokenik, several main steps can be distinguished:

Preparation for installation (calculation and purchase of materials, preparation of instruments, search for workers, if not planned independent installation of the fence);
Planning territory;
Mounting frame;

Each stage we describe in detail for a clear understanding of the entire installation process.

Materials

Materials will be needed:

Scheme of the fence section from Evrohstaper

They are in advance the height and width parameters and the width of the material are in advance, and when the calculation conditions are inserted (the length and shape of the perimeter of the area, the presence and amount of wickets and the gate, their width), the computer issues the exact value of the amount required for the installation of the amount of the amount of the number.

However, such calculators have a certain error, and when installing can often be noted that the material is not enough. Experts are recommended to add about 10% over the desired value to the calculated value of the value, so that the stakeholder is just enough. Let it be better to stay a little material in reserve than it is not enough.

After all, the order of a new partner party can entail many problems: long-term expectation of the completion of the manufacturing process (if the required material is not available), the differences in the quality of various parties (may be slightly different with the shade); It may happen that the purchased material was excavated without a residue and its further production is not planned at all.

An example of bilateral fencing from EvroShther

And the wines of everything will be improperly calculating using a universal calculator.

Instead of a calculator with the same success, you can use the simple formula for: each meter of the fence accounts for about 6 stakes (if the width of them is up to 15 cm) or 8 staketing (with a width of 10 cm). To calculate the length of the fence, the length of the perimeter should be subtracted the size of the gate length and wickets. So, without calculators and other special programs, you can approximately calculate how many stakes will be needed to install the fence of any length.

Instruments

To install the fence from EvroShtnik, you will need:

After everything is ready, you can proceed directly to construction work.