Chaise lounge with her hands drawings. How to make a comfortable chaise longue? From wooden lattice

The country season is nearing and it's time to think about creating a deck chair with their own hands. It will allow you to enjoy the rest in nature fully.

The chaise lounge in French means a long chair. This is a chair for a relaxed rest. It can, at the request of the owner, change the position of the back.

Sun beds are widely used on the beaches, by the pools. In the household plots, dachas.

Sun loungers are made of various materials:

tree;
plastic;
aluminum;
rattan;
pVC pipes;
sturdy fabric.

Wooden lounge chairs are most popular and environmentally friendly. They are distinguished by the variety of shapes and structures. The disadvantage of monolithic wooden sun beds is their weight. But this problem is solved with the help of wheels.

Plastic lounge chairs are characterized by light mobility, ease of care, relatively low cost. Their minus is short-life.

Fabric sun beds are universal and comfortable. Their frame is made of wood, metal or PVC pipes. They are easy to add up, do not occupy a lot of space.

Rattan deck chairs perfectly look at the Nature Low. They differ in environmental friendliness. However, their purchase is expensive. With sufficient skills, the rotangy suits just weave yourself.

In the article we will tell you how to create wooden deck chairs with their own hands.

For durability of spent efforts, the materials used must be processed.

The tree from moisture, harmful insects, rot, mold will help protect antiseptics and special impregnations. Processing is best done before assembling design.

After mounting the sun beds, wooden parts should be covered with primer, olphoua, varnish or paint. So you will extend the service life of your masterpiece.

Fabrics also worth protecting from rain and sun. Save their brightness and service will help water-repellent impregnations. Their action lasts 2-4 weeks.

And, of course, remember when working a well-known Russian saying. Measure seven times, cut off one.

Monolithic deck chair

Solid models are characterized by severity. Therefore, to facilitate carrying the wheels add to the headboard. Further instructions will help make a chaise lounge on wheels with their own hands.

You will need tools:

electric jigsaw or hacksaw;
drill;
screwdriver;
self-tapping screw;
sandpaper with small grain;
waterpas;
roulette.

When choosing a tree, pay attention to the coniferous rocks. They are sold at affordable prices, characterized by increased water consistency.
For lounge chairs, materials are needed:

the glued plate of wood, its thickness should be 2 cm and more; The thickness of at least 2 cm.
boards with a thickness of 0.25 cm.
wooden timber with square cross section 50x50 mm;
4 wheels with a diameter of 10 cm;
corners to strengthen the bed;
door hinges;
varnish or paint.

We offer you to make a chaise lounge according to this scheme.

Legend:

Front legs.
Legs rear.
Carrier longitudinal.
Bearing backrest.
Popper focus.
Bearing transverse.
Fixing plank.
Support rack for the back.
Wheels.
Fork bar.
Plates backing.
Seat planks.
Contrast reference bar.
Fixing plank.

You can independently determine the size of the desired deck chair and make calculations. Either use the standard size of 60x190 cm. It is the most optimal and ergonomic for the average adult.

Hand chair assembling on wheels

We put the base frame from the bars. Introduce the bearing parts with corners, similar to what fix the base of the bed.

We are wearing the resulting frame, pre-prepared and sandy boards.

We make brucks for legs for legs. Their height varies usually in the range of 5-10 cm. Choose comfortable for yourself and households.

Drills a drill hole, retreating 5-7cm from the ends of the longitudinal sides. Fix the legs with long bolts. Horizontal side by controlling Waterpas.

We screw the wheels to the center of the legs bolted with a diameter of 30mm.

We proceed to cutting the elements of the lattice. I cut off the 4x60cm board with an electric bitch.

With the help of self-tapping and screwdriver, we screw the rail to the chaise lounge frame. Since the boards are not screwed up close, we use struts to obtain smooth gaps.

We should have two details. Smaller is intended for the head of. We connect both lattices with door loops. Under the opening part, install the bar for the support.

It remains to open the flaws of production. Apply primer for wood. Painted in your favorite color and chaise lounge with your own hands ready.

For a more comfortable rest, you can sew additional mattresses suitable in size to the lodge.

Simple lyrzhak

To create a deck chair from a tree with their own hands you need the following materials, as well as tools:

roulette and square;
pencil;
saw;
electric drill;
screwdriver or screwdriver;
screws, self-tapping screws and studs for fixing;
sandpaper or grinding machine;
putty for wood;
paint.

The paper uses wooden bars:

for the backrest of the lounge chairs take boards 5? 10 at a length of 88 cm - 2pcs, 39 cm -3pcs, 60cm-1 cover;
2 longitudinal bar for a frame of 215 cm long;
2 transverse timber -50 cm;
6 legs -35 cm;
13 seats for the seat of 2.5? 8? 60 cm;
6 Reques for the back - 2.5? 8? 88 cm.

The first priority is to create a very durable frame. We take two parts with a length of 215 cm, connect them with screws with half-meter transverse parts.

Go to the seat. Take all the rails of 60 cm. Attach them to the frame with self-draws, leaving small gaps. In order for the lumeges to be smooth and the same, use strips with a thickness of 1 cm.

Create legs sun bed. To give maximum stability, the chaise longue, "in the legs" nourish two legs at once. In the headboard one. The instructions are 35 cm height brus. But you can choose a comfortable height for you.

We make a back of 2 boards in size 88 cm and 3 - 39 cm. The resulting frame is obliged to easily enter the base, leaving a small gap between the structures.

Reliably fix the longitudinal planks. We twisted them for a more beautiful view.

We attach the back to the base of the sun bed. To do this, drill holes, retreating from the edge of the seating 9cm. Fix with studs.

We are at the heart of a chaise lounge 2 groove for support bars. The first recess 5x10 cm should be approximately 9 cm from the hairpin. The second 20cm from the first. But its depth will be only 5x5 cm.

In the first recess is inserted with 60cm horizontally. To change the position, the plank is transferred to the second recess vertically.

Sand all roughness, shortcomings. Treat. Cover with paint or varnish. The chaise lounge is ready for his own hands.

Video garden sun bed do it yourself

Tissue chaise lounge

The chair with a frame, ancillable cloth, is one of the most convenient, budgetary types of chaise lounges. It is convenient to add it, easily transferred. Can be stored in flat form. It takes little space.

To create a deck chair, you will need:

bolts, nuts with a diameter of 8cm;
small nails with round hats;
round-section sticks (1pc. -65cm, 2pcs- 50cm, 2pcs-60cm);
rectangular bars with a thickness of 25x60cm (2 pieces of length 120cm, 100cm and 60cm);
filty, sandpaper with small grain;
glue;
durable material with a size of 200 by 50 cm.

Carefully choose the materials so that your work is not in vain. Bars from solid wood breeds are perfect for sun bed. Stop the selection on:

birch;
oak;
beech.

Fabrics choose with maximum strength. Great fit:

tick for mattresses;
tarpaulin;
canvas;
camouflage;
denim.

These materials have increased wear resistance and serve for a long time. Go to the creation of a deck chair with your own hands. The basis consists of three frames:

A.1200x600 mm.
B.1100x550 mm.
V.650х620 mm.

Cut the boards of the desired length. Grind sandpaper.

In longitudinal bars, we make indents 70 and 40 cm, drill the hole drill with a diameter of 8mm, like the bolts. Ground a round nadfyl.

We make cutouts in the details of B. They will change the position of the back afterwards. To do this, step up 7-10 centimeters. It is necessary to cut 3 or 4 recesses. Well grind.

According to the scheme, drills in holes for connecting parts.

We collect the base of the sun bed. Rama A and in connect with screws. Then we connect the frames A and B. The tips of round rivers for greater reliability lubricate the PVA before assembly. Sun lounger is ready.

Now you need to sew the seat. Attach the material to the sun bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Side edges. Thus, you will increase the wear resistance of matter. The chair will look more accurately.

Favorite fabric base for sun bed. Wrap round rakes on the details of A and B. nail small cloves with round hats. Chair is ready.

Council. The edges of the tissue base can be made in the form of loops. In this case, the seat is simply striking on the rail.

Tissue chaise lounge with their own hands. Model 2.

For this chair you will need:

wooden rails in size 2x4 cm. Two rails with a length of 122cm, 112cm, 38cm. One thing is 61 cm, 65 cm, 57cm. And four rails in length 60cm;
reiki size 2x6 cm. For one 61 and 57cm;
65cm of a tree rod with a diameter of 1.2cm;
cutting fabrics with a length of 137 cm and 116cm width;
bolts, washers, nuts, screws;
glue;
round feet, sandpaper or grinding machine;
electric drill.

Manufacturing process:

Pre-process all the details of the future chairs. Collect them with the help of a machine or fine-grained emery paper. Cover with special impregnations that protect the tree from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbar from the bottom of the legs helps to fix the position of the back. Make them. Either slots by recovering from the edge of about 20, 25, 30 and 35cm.

Drill holes for bolts in the backing frame. To do this, on each side, measure 41cm.

On the frame of the seating, retreat from the top 43cm. Make holes.

On the details supporting the back, drill holes in the center of the edges.

All holes are treated with a rounded clock.

Installation of the model

First collect the back of the back. A 61 cm long strainer will carry a large body load. Secure it as securely as possible. Leave a small gap between two slats. Through it will be leaving the fabric.

Collect the seat. Fold it with a backrest frame. Between them be sure to put the puck. Build a frame with bolts.

Council. So that the nuts are not quickly cleaned, tighten on top of the additional lock nut. For greater reliability, put wrenches on glue, varnish or paint. First tighten the nut. Then weaken it slightly so that the parts are free to rotate.

Set the detail of the backup support using wipers and bolts.

Sand all flaws. If desired, you will walk or paint.

Bend the fabric in half, go back from the edge of 1.5 centimeters. Remove. Bend the edge of the material for the rods, which fix the cloth between the straps. Purchase.

Now shave between the planks. Secure the rod. This installation model allows you to shoot a washcloth without much effort.

Chaise lounge from polyvinyl chloride

Another example is a cloth with a fabric base. Only in this case wooden rails are replaced by PVC pipes. The sizes of the chair may vary.

In this model of the chaise lounge, they used with their own hands:

2-time pipes from polyvinyl chloride;
M-shaped connectors - 8 cover;
T-shaped connectors - 6 cover.

First, connect for the vertical strip PVC pipe 30 and 45 cm using the T-shaped connector. On the ends, dying g-shaped connections. Similarly, connect the second vertical.

Now you need to connect two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped compound, which in turn should be directed into the structure. The second side consists of two 30santimeter pipes combined by the T-shaped adapter, deployed at an angle of 45 degrees from the long side of the bar.

Do not hurry. Accurately measure the pipes. As a result, you should have a rectangular design.

Now is the time to make a connection on which the seat will rotate. To do this, insert a 5 cm pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Long sides make analogously to the vertical section using pipes 30 and 45 cm with a M-shaped connector. For transverse crossbars, use a solid tube with a length of 30cm. And also consisting of 2? X in 20cm with T-shaped adapter.

You did everything right if you got a rectangle in a rectangle.

The seat is located between the long section of the vertical section and short horizontal. Set up the level of comfortable tilt for you. Measure the distance between two free T-shaped adapters. Cut the pipe of the desired length. Insert the rear backup.

Make fabric flow measurements for your chair. Use dense fabric. For example, sail, tarpaulin, jeans. Side the edges, and secure the cloth on the chaise lounge. Enjoy the rest.

Chaise lounger

A durable, light chair is quickly going and disassembled. It is convenient to take with him in nature. The model is so simple in the manufacture that even novice masters is suitable.

The collapsible chair consists of 2 parts:

backs, covered with dense, wear-resistant cloth;
wooden seats.

In addition to the tools, the following materials are used:

2 legs for the back of the size of 20x40x800mm;
2 seats legs - 20x40x560mm;
2 lower crossbars - 10x50x380mm;
1 upper crossbar - 10x40x380mm;
1 crossbar for seats - 20x40x300mm;
5 RECEK-20х40х400mm;
coverage of matter - 600x500mm.

The order of assembling a portable chaise chamber is depicted in the diagram.

First, parts are connected using self-tapping and screwdriver.

The workpiece is processed and varnished.

While the frame is dried, the fabric is fed and the fabric is stitched. Then it is nailed with the help of brackets and a construction stapler to a wooden billet.

Connect the back and seat chaise chandelier.

Enjoy your holiday in a new armchair.

Pay attention to another interesting lounger model in the video.

Kentucky chair

The original view of the chaise lounge is possible to make it yourself. Suiter is going from bars. Convenient, just folds. It takes a minimum of place when stored.

For chairs you will need:

4khmillimeter galvanized wire;
16 brackets;
bruks 30x55 mm.

Before starting assembly, it is recommended to process bars to protect against ultraviolet rays, humidity. Choose an oil-based simile and wax. Well suitable "Beyz". You can take parquet oil. Apply a means using a sprayer or brush.

Installation of the chair Kentucky

Drill holes. Their diameter should be slightly wider than the thickness of galvanized wire. Sand all irregularities and roughness.

Fold the details according to the photo and start riding a wire plank.

Lock it with brackets.

Council. Instead of wire, use galvanized studs. They are attached nuts and washers.

Lift a skip. Kentucky chair is ready for use.

Original chaise lounge

The company Design Koalition has developed an unusual chaise lounge with a canopy from a fabric that will enjoy the rest in nature even on a hot day, closing from the scorching sun. The cost of such a sunrise is 5970 euros. We will tell you how to save and make the original chaise lounge with your own hands.

To create a sun bed you will need the following materials. As well as tools:

2 plywood sheet 2 cm with a size of 160x180cm;
6 Round cross sections with a diameter of 30mm and a length of 92cm;
12 slats from plywood residue 94x10cm;
dense tissue width from 92cm;
building glue;
screws;
roulette;
cardboard for layout;
circular Saw;
electric drill.

Transfer the scheme to cardboard or tight paper. To facilitate the task, you can pre-draw it on 10 per 10 cm squares. The template makes it easy to correct all the shortcomings on paper. Subsequently, you just enter it 2 times. And perhaps you taste and make several rest chairs.

We carry the drawing on the sheets of plywood and cut out the side parts of the disk or ribbon saw. In places of compound with a round bar, cut out the deepening with a diameter of 30mm.

Grind all irregularities and trim defects.

We collect a tough design. The ends of the bar lubricate the joinery, or the PVA. We insert the timber in the groove and screw the screws. The place of the joints can be additionally treated with glue for maximum reliability.

Now it is necessary to put the design on the side. Put cradle at the places of gluing. And give a completely dry chaise longue.

We start screwing the planks to the ribs of the design. At the same time, we make an indentation between them with a length of 10-12 cm. Tighten the screws with deeper, so that their caps do not cling to the fabric and did not tear it.

Spread the product again. Now hide the flaws of the assembly.

Wood with a putty for wood hide all screws of screws in fabric tension places. Prayes chaise longue.

You most likely noticed that in the description there is only an approximate width of the awning. The fact is that you can independently decide to cover the chaise lounge in a completely cloth, or only make a canopy. Decide yourself. Measure sizes and sew awning.

Council. Fasten the awning is better on ties or velcro. This will allow you to remove the fabric at any time and wash it without problems.

Berezova Lyryzhak

I must say that our Russian craftsmen are distinguished by ingenuity and creative approach. This chaise lounge is made with his own birch logs. It is distinguished by the Russian folk flavor. Perfect for garden sites.

The paper uses:

logs with a diameter of 75-120mm;
drill and drill set;
electric saw;
brackets and selflessness;
marker;
isol or chalk for drawing.

We proceed to the creation of a deck chair.

We saw the trunk on a log of 45 cm long.

On the floor, the line of the future sun bed with the help of chalk, or sample it isolate.

We put the logs according to the scheme. Drills the hole drill and connect the logs using long self-tapping screws. We use the end key.

We turn almost the finished product. Test. Eliminate flaws.

For greater stability, the rear side is fixed by the brackets.

The monolithic birch chaise lounge is ready to delight you and your guests.

Unusual sun bed for giving on their own

Sunbed from pallets

One of the most budget chairs is made by its skillful hand from the pallets. What it is? Pallet or pallet - stand, which is designed to transport cargo.

Sunbed from pallets with your own hands video.

Now you have several options for making deck chairs with your own hands. Select a convenient design for you or acceptable by cash costs. When choosing sizes, consider that the wife, your children will be resting on the sun bed. Adjust the width and height for general needs.

Work in the fresh air brings a lot of pleasure. But if you have to deal with a serious project requiring considerable physical efforts, then a sense of fatigue arises at the end of the day. You can quickly restore strength in different ways. One of them is a rest in a wooden chaise lounge with a glass of a cool drink in his hand. Such furniture can be purchased in the furniture cabin or make it yourself.

Types of designs

Traditionally, chaise lounges for giving are made in the form of structures resembling chairs, in which the upper part is similar to the back of the chair, and the bottom - on a small sofa. The main advantage of such models is the ability to change the position of the back. Depending on the execution, several types of chairs can be distinguished:

in the form of a rocking chair;
suspended;
anatomical;
folding.

In order to facilitate the movement of wooden chairs in the design, special wheels are often added, which allow you to deliver them to any place.

Special view of chaise lounges are anatomical adaptations for giving, which exactly repeat the bends of the human body. It is possible to talk about their convenience and practicality after purchasing such furniture items.

Some manufacturers are trying to offer and non-standard wooden chaise lounges for giving, so attract designers to work together to create adaptations for recreation unusual forms. Such models are more expensive than usual, but if you want to surprise guests with bizarre forms of the chaise lounge, then you still have to think about buying such furniture.

Due to the presence of suspended fastening, sun loungers allow the owner to swing, resting on it. To install such a fixture on a metal frame, a retainer is used, which provides it with high reliability. You can place a similar structure in a shady spot or can be installed at the top of a special part in the form of a small visor. Swinging in such a chaise lounge will bring only pleasure.

Instead of a stable thorough support in the design of a lounger, you can add rounded feet-hoops. Then it can be used as a rocking chair. This model can be installed anywhere. If you wish, it can be folded and transferred to another part of the site or a special place that was selected for recreation.

It is no coincidence that more and more dacities are thinking about the manufacture of a lounger. This device attracts them with its functional features:

Garden lounger provides the most comfortable conditions for the spine and the muscles located next to it. In the middleback position, the spinal muscles are most relaxed, which are exposed to a particularly high load when working in beds.
Sun loungers are not only distinguished by ease of use, but also easy to fold, allowing them to transfer them from one place to another.
Features of the design allow the owner without much effort to change the tilt of the back from the sedent to the lying position.
Beautiful decoration of the country area, which will look great not only in the garden, but also on the veranda. The chaise lounge is able to give a country house stylish and beautiful view.
An excellent way to relax people of different complexes. Due to the high reliability, such fixtures with ease will withstand up to 100 kg of live weight.

Selection of material

Traditionally, chaise lounges for giving are made of wood. They are distinguished by environmental safety, ease of operation and a democratic price.

But wood is not the only material from which the chaise lounge can be performed. Also for their manufacture manufacturers use other materials:

plywood;
the cloth;
corrugated cardboard;
lamps;
wooden pallets;
rattan;
plastic;

Plastics is often chosen for the manufacture of chaise lounges, which are installed next to natural reservoirs and in the pools.

Advantages and disadvantages

The tree is popular as the material of making deck chairs for giving due to the presence of the following advantages:

low price;
availability;
ease of care;
ecology.

The only drawback is low resistance to rotting, which can be enhanced by special processing.

Often sun loungers for giving are made of metal, which has the following positive properties:

high strength;
a minor weight, which can be achieved through the use of an aluminum frame in combination with a tissue middle.

To make such a chaise lounge, the owner must have a welding skills to create a frame. It is still necessary to handle anti-corrosion compounds, otherwise it will last long.

Plastic structures include the following advantages:

low weight;
unusual design solutions;
lack of need for special care;
low price.

Plastic sun beds have very low strength, poorly withstand the aggressive effect of climate. Not everyone has enough experience and knowledge to independently build a sun bed from this material for giving.

Preparation for work

Before proceeding to the manufacture of a deck chair, you need to think about the materials and tools that will be needed to create it. Much here depends on the selected model. The option is fairly common when the chaise lounge is made of mixed materials - wood and matter. To get a reliable and attractive type of fabric chaise lounge with a wooden frame, you have to prepare the following:

durable fabric (denim, tarpaulin, canvas) 2 m long and 50 cm wide;
3 pairs of plates 0.25 x 0.6 cm long 62, 110 and 120 and cm;
wood rails 2 x 2 cm (one 65 cm long and two to 50 cm);
pVA glue.

Do not do during this work and without certain tools, and among them should be mostly those that any owner has at home or can acquire:

nuts with suitable bolts;
roulette;
corolnic;
feet;
sandpaper with minimal cross section;
electric saw;
drill.

If there is a desire to make a chaise lounge from other materials, then a completely different amount of consumables and a tool kit will be required. To make products from metal, do not do without a welding machine and a grinder. When creating structures from rattan, jute and or vines, there will be special devices for weaving.

It is desirable before starting work to find as much information on the manufacture of a garden lounger with their own hands to learn about all the intricacies of the workflow and thereby avoid possible difficulties.

Now that everything necessary for work is prepared, you can move to the consideration of the process of creating a long chair from a wooden material. The choice of wood is quite logical, since this is the most affordable and environmentally friendly material. It can be freely acquired, not carrying significant cash costs. There will be no difficulty when working with a tree, even among lovers, who, with minimal skills, working with this material can create something with their own hands.

Order of work

The process of manufacturing a sun beds does not deliver the complexity of the landlord. If you come to the point with all seriousness, you can make a beautiful thing. The manufacture of a deck lounger looks like this:

First of all, it is necessary to make basic frame elements. Of the available lumber, you need to make boards with the following dimensions of 400 x 2.5 x 8 cm. Additionally, it will take three bar 400 x 5 x 10 cm. In addition to them, you need to make two fixing studs.
Each wooden carcass detail must be cooled to polish and cover with a special impregnation to protect against mold and rotting.
The frame is made of a wooden bar in accordance with the selected scheme.
For the construction of a seat for seating, you need to cut the boards with a length of 60 cm each. Their number can be anyone and depend on the size of the gap between the boards. For standard models with dimensions 60 x 200 cm, no more than 13 boards are most often required, which are placed with an interval of 1 cm from each other.
Using the screwdriver, the boards must be attached to the frame, following the wooden segments, there are strictly parallel to each other.
We begin to mount the legs, pre-laying each of the same length, which should be 35 cm. If desired, the chaise lounge can be made slightly lower. Prepared bars must be consolidated from the head of the head and in the legs. From the side of the head, the legs can be made single.
For the manufacture of the back, you will need to make a frame that should be freely logged in a design made at previous stages. The frame should have the following dimensions - two segments of 88 cm and 3 pieces of 39 cm. Do not worry about the fact that around the perimeter of the back inserted into the frame, there will be gaps. They are needed for free folding back.
Directly on the reference frame, you must fix the rails of the required length. They can be installed as across, fixing on the main part and along. During mounting, the self-tapping screws, having to sleep in the body of a tree. This will make the use of a chaise longue more secure. So that the product looks attractive, the upper part of the rail can be rounded.
To ensure the most reliable fastening of the back to the base, it is necessary to pre-hold through holes in these parts, retreating from the edge of 9 cm down. They need to insert fasteners and secure.
Before installing the supports, you will need to cut the grooves in the main design - 2 pieces on each side. The first is made at a distance of 9 cm from the stud with dimensions of 5 x 10 cm, and the second is cut with an indent of 20 cm from the first, the dimensions of which should be 5 x 5 cm.
To regulate the position of the back in this model, a wooden bar is used 60 cm long. It must be installed in the first or second groove, which allows you to transfer the product from the half-time position to the position of the half.
The final stage is the finish of the product. You can use the ideas borrowed from ready-made drawings or make a product with the help of available materials. The chaise lounge for giving can be painted, handle varnish or arrange using decoupage techniques - any of these options will change the appearance of the deck chair and extends its service life.

The method described above is not the only way to make a wooden chaise lounge. Other options are also possible - for example, use as the basis of a metal frame from an old clamshell.

Care of the finished product

The service life and the functionality of the country lounger largely depends on the competent care for it. For many years he has brought the owner only pleasure, the following activities should be held regularly:

wet cleaning of textile elements;
lubrication mechanisms of folding;
timely painting.

Many of our compatriots who have in the property of giving, in different ways arrange their vacation on it. Often they can have wooden chaise lounges in the sites, which provide them with excellent conditions for recreation. For the most part these are self-made structures that can be made with your own hands, not even possessing experience in the construction industry. Thanks to the simplicity of the design of the chaise lounges can be made from the girlfriend. But it is still not worth starting without drawing.

A simple deck chair made of wood. How to make a chaise lounge with your own hands, photos, schemes, deck chaise lounge drawings, video.

Chaise lounge is an indispensable attribute of garden furniture for summer holidays on the bank of the river or in the country. You can make it yourself, in this article we will look at the process of making a simple and practical folding chaise chain chandelier.

The design is quite simple, make a folding chair - the chaise lounge will not be much difficulty.

How to make a chaise lounge: drawings.

The figure is given a drawing of the folding chaise chairs, if necessary, the sizes can be changed a bit.

1 - Rake 20 x 50 x 1300 mm - 2 pcs.

2 - Rake 20 x 50 x 1930 mm - 2 pcs.

3 - Rake 20 x 50 x 590 mm - 2 pcs.

4 - Rake 20 x 50 x 580 mm - 1 pc.

5 - Rake 20 x 40 x 520 mm - 2 pcs.

6 - Rake 20 x 40 x 560 mm - 2 pcs.

7 - Fabric 530 x 1400 mm - 1 pc.

8 - Screw M8 x 50 - 4 pcs.

9 - Screws 6 x 45 - 2 pcs, and 6 x 60 - 8 pcs.

Schema of folding lounge chair.

How to make a chaise lounge: materials and tools.

For the manufacture of a deck chaiseing, it will take wood from solid wood: - Birosis, oak, tees, nut, ash, beech, pear, elm or white acacia.

The solid woods are processed harder, but the chaise lounge will be durable and serves you for quite a long time.

Also, joinery glue will also be needed for fastening the fasteners.

From the tools you will need:

Wooden hacksaw.
Drill with sweepers.
Chisel.
A hammer.
Sandpaper.
Dug.

How to make a chaise lounge.

We heat the rails of the desired length according to the drawings, the edges of the rivers are desirable to round. Weching the rails emery paper.

The figure shows the frames "A" and "B" and the tilt regulator "B".

We collect the frame. Reiki Breppy with a groove compounds on joinery glue, connections should be durable and not fused.

On the frame "b", we cut the groove to adjust the tilt of the seat chaise chandelier.

Drills holes for fastening the diameter of the holes under the bolts of 8 mm.

We connect the frames "A" and "in" screws through the holes, then we connect the frame B.

We collect a frame.

We try cloth, stretch, wrap on the crossbars and we are sewn by hand or a sewing machine.

Chaise lounge chair is ready!

Making a chaise lounger video.

Main advantages

In its own functional purpose, lounge chairs are the same seats, but more stable and low seats. They can be resting in a half-round position, which allows to relax the spine and all groups of muscles as much as possible.

The indisputable advantage of the chairs is a comfortable form. The garden armchair can be folded so that it can be sitting or lying on it depending on the personal preferences of the person.

Traditionally, the summer beds are made of wood, because it is ancient times considered the most environmentally friendly, economical and easy-to-use material.

Sun loungers are ideal for watching nature, because they have low weight and very comfortable. Therefore, it is not surprising that many owners establish them in their garden or in the country. Such furniture can stand on the street throughout the summer, and during the winter period it can be removed into some suitable room, for example, storage room.

Most often, garden sun beds are made of materials such as:

wood;
plastic;
rattan.

If you do not have a desire to spend time and strength on an independent assembly of a garden sun bed, you can always order it in the furniture cabin.

Types of designs

If you finally decided to go to the manufacture of a lounge chair, then at first you will not hurt to get acquainted with the main types of sun beds for giving. There are quite a lot of them, so only the most popular:

These are just some of the sun beds that can be purchased for giving. If you wish, you can independently make a chaise lounge in the form of a swing, as well as using ordinary branches of trees as a material. It all depends on your preferences.

Manufacturing a wooden chaise lounge

To begin, you need to prepare a specific set of materials and tools that you will need for the manufacture of a homemade chaise chain:

self-tapping screw;
electrolovka and screwdriver;
boards for a frame of a frame of 2.5 cm wide;
bar 40x40 mm for frame;
corners for bonding boards (4 pcs.); Wooden plates with a thickness of 20 mm.

Going to the store for boards and stoves, we advise you to choose a material made of coniferous wood. It is much better to carry the negative effect of precipitation and has an excellent fragrance.

Stages of work

Now that you have everything you need prepared, you can go to the assembly of a wooden sun bed.

Previously, you should decide on the sizes of the garden chair. You can use the finished drawing or make it yourself. Usually, standard lounge chairs are 60 x 200 cm.

Now you can start making a frame. For him, they will need bars from which four sidewalls need to be made - two of them should turn out to be 200 cm long, and two more - 60 cm. Ready sidewalls are needed to continue to connect with each other with the help of mounting corners.

From the outside of the frame, it is necessary to sew a 2.5 cm width board.

We take long sidewalls and fastened to them with 4 legs, pre-retreating from the edge of 8 cm. The legs can be made of 10 cm long bars. For fastening them to a frame, we use the screws.

After completing the work on making the frame, we start collecting the grid. For it, we need wooden plates from which you need to cut the boards with dimensions 60 x 10 cm using an electroltrol bike.

Boards are fed to the chaise chaam chaise chaise chamber with self-tapping screws. Be sure to leave the gap between the boards approximately 1.5 cm. Then the lattice sun bed will look neat and beautiful.

If you wish, you can make a chaise lounge with an adjustable back. In this case, the grid must be divided into two parts. One of them will serve you as a sun bed, and the other headboard. Both parts mounted to connecting boards. To reliably connect the elements, the door loops are best.

To the headboard can be fixed in a certain position, a transverse bar should be added to the frame design from the inside. To it, with the help of self-samples, you need to attach the support rack for the head of the head. If you do not have such, then you can buy it in any construction store.

Now that your homemade lounger is ready for giving, it remains only to polish the boards, cover them with olphus or special paintwork material for moisture protection.

Creating a cloth

If a wooden folding chaise lounge for some reason does not suit you, then you can try to make a sunbed from the fabric instead.

Materials and tools

For the manufacture of a lounge chair from the tissue material, you will need the following:

bolts with nuts 8 mm;
a piece of durable tissue 200x60 cm;
rake round sections 2 cm thick (one bar with a length of 700 mm, two to 650 and two to 550 mm);
rectangular boards with a thickness of 30x60 cm (two boards with a length of 1200 mm, two to 1000 and two to 600 mm);
sandpaper.

For the manufacture of a skeleton bed, it is best to use tarpaulin, camouflage or denim fabric. They have sufficient fortress and resistant to wear.

Algorithm of action

Now you can go directly to the assembly of the sun bed.

As it was possible to make sure how to make a chaise lounge for giving from the fabric is not more difficult than a similar sun bed.

Purchase of garden chair

Perhaps some daches will not want to spend time and money for the manufacture of lounge chairs with their own hands. In this case, you can go to the store and buy a ready-made garden sun bed there. In the furniture salon you will be able to offer a choice of many such products. Surely among them you will find both budget options and unusual design models of sun beds for the street.

After studying the proposed options and comparisons, their characteristics will only remain to decide with the sum that you are willing to give for a chaise longue. The cost of such beds depends on the size and material of the manufacture:

wooden chaise lounges will cost you within 6000-15000 r.;
for sun beds from plastic you will have to give from 1500 to 9000 p.;
not too hit your pocket and folding frame chaise lounges, which can be purchased for 1350-9500 p.

When traveling to the cottage, the thought is heating the idea that they will have the opportunity at least a few minutes to lie in the fresh air and enjoy the surrounding nature. But in the forces of everyone to make your holiday more enjoyable if you equip a place for him in advance. To do this, you must have special furniture like a deck chair.

The easiest way to buy in the nearest furniture salon, although some owners often independently make a chaise lounge and thereby save a lot. You can do the same, especially since you do not need to have special skills and knowledge. Even the most ordinary wooden sun bed can be made from the material, which will certainly be found in any farm.

But you will have to prepare for this work in any case, because without the drawings you are unlikely to be able to do just such a chaise lounge, which you want, especially if you do not have the slightest experience in this matter.

The homemade chaise lounge for the cottage is much more preferable to the shopping bed, because you can decide how it should turn out, and at the end of work, decorate it at my discretion. Of course, it will require certain efforts on your part, but in the end all this will be compensated by the comfort, which will provide you with your homemade chaise lounge.

Chaise lounge with his own hands