Puppet house of plywood as. How to make a puppet house from plywood. Step-by-step instruction of manufacturing and assembling plywood house

All photos from the article

In this article we will look at how to make a puppet house from plywood. Early, you can always go to the toy store and buy a ready-made model there, but there are several reasons for not hurrying with such a decision and still take into hand tools with the goal of creating a small miracle for your child. So, proceed.

General provisions

To begin with, let's deal with the motivation, why at all it is necessary to take for the manufacture of a house for dolls with your own hands:

Advantages of their own manufacture

Saving. The price of factory models is high enough, while homemade will allow to significantly save a family budget;
Uniqueness. The project you realized will be the only one in its own way, your daughter will definitely not meet the same toy in his girlfriends;

Compliance with desires. In your doll house there will be exactly the rooms, such shades and such decorations that the child will wish;

Tip: Connect your child to work, it will allow you to spend more time to spend time and make a homemade toy even more beloved.

The advantages of choosing plywood

So, why it should be done with your own hands, and not run to the store, we figured out. Now let's decide on the material.

The wooded plate consists of several glued sheets of wooden veneer, which determines the presence of the following advantages:

High strength characteristics. Durable children's toys are always much longer than their garlands;
Easy processing. Plywood is easily sawn, painted, dried, milling and fixed by nails or self-drawing;

Aesthetic appearance. The top veneer has a beautiful original textured pattern and a pleasant eye with a warm tint;

Low thermal conductivityThrough what warm to the touch. For a child, this is an important factor;
Relatively low cost. Wood-layered stove does not differ high cost, besides, it will take quite a few material to perform the task under consideration.

But, speaking of the advantages of plywood, it is necessary to mention and its possible disadvantage that has an important meaning. The glue used during the production of the wood-layered plate may contain formaldehydes with high toxicity.

Therefore, be sure to pay attention to the appropriate labeling and select an environmentally friendly product, because it contacts your child with it, and the following marking will help you:

Getting to work

The instruction begins, as in most cases, with the preparation of all necessary accessories that you may be needed in the process of implementing a conceived project:

Step number 1: Preparation of accessories

The required number of plywood sheets is 5-7 mm thick;

Lobzik on a tree sawing;

Joinery glue to create a roof;

PVA glue for fixing decorative elements;
Assembly tape;

Paint and brush;

Segments of wallpaper with small pattern;
Cardboard corrugated type for roof;
Tree rules that will serve as stairs;
Pencil and construction roulette for applying all the necessary sizes;
Self-adhesive film with wood pattern for floor formation.

Now you need a drawing of a puppet house of plywood with dimensions to prevent errors in the assembly process and get a truly beautiful and functional design.

Step number 2: Drawing

Drawings of a puppet house from plywood can be borrowed from the Internet, along the way, making their own adjustments, or draw everything yourself.

It is noteworthy that the installation of the front wall can generally refuse that there were constant free access to the house.

Step # 3: Assembly

Having everything you need at hand, including drawings of a puppet house from plywood, proceed to the main task:

Location on a sheet of plywood all parts of future housing for dolls;
According to the markup, cut the walls and other structural elements with the help of an electric bike. Also create window and door loops;

Sand all the ends to eliminate the possibility of getting an injury on sharp edges of cuts;
We smoke the joints of the elements of the middle of the structure and connect, fixing the location of the compound by assembly tape;
Next we glue the back wall. Here you can already do without scotch. The protruding glue carefully remove with a clean vet;
Then, with the help of an adhesive solution, all internal partitions are mounted;
We produce roof installation;
From the prepared cardboard, we cut a small "tile", after which we stick it on the roof and stain with the help of brush and paint in the desired color;
Prayer or salary chunks of wallpaper wall, giving them an aesthetic well-groomed look;
On the floor glue a self-adhesive film, creating the illusion of a real wooden coating;
Cutting on small parts Wooden rules and assemble stairs from them;
Mount the staircase span, we put the furniture and hang curtains. On this, the process of assembling a puppet house from plywood is over.

It is not worth limiting the own fantasy. You can, for example, to build another fireplace from match boxes, lay carpets from pieces of fur or wool, install a gym or even pool. All in your hands. The main thing is that the result is pleased with the daughter.

Conclusion

The process of creating a puppet plywood house is simple and very exciting, especially if you connect to him and the child itself. As a result, an inexpensive original beautiful structure will be released, which gives rise to proud of the work done. The main thing followed outlined recommendations and be careful.

Video This article will give you the opportunity to get acquainted with some additional materials regarding the information provided.

Become a wizard for a child, embody a child's dream into reality! If you have aroused after reading questions on the topic, then you can ask them in the comments.

In children's stores you can find a wide range of toys, including puppet houses of various sizes. Such a toy is the dream of every girl. Such a house can not only be purchased, but also to build yourself. The original puppet house from plywood can be made in just a few days. This will allow not only to save, but also make such a toy that will fully fit the wishes of the baby. After all, the child can take an active part in the manufacture, express his wishes and help decorate. For its manufacture, they will need plywood sheets, scheme and sketches, as well as simple materials and tools.

Plywood House for dolls - Great toy for every girl

Stores toys offer a wide range of houses for dolls. However, the independent production of such a toy from plywood has a number of significant advantages:

Manufacturing on an individual project. The main advantage of self-making is an opportunity to make a house like this girl sees. At the same time, it is possible to take into account the desired size, quantity and design of rooms, layout, furniture features and additional decorative elements. Such a toy will be unique.
The ability to make a house of any size. Its dimensions depend only on the wishes of the child and the presence of a free space.
The use of collaboration with the child. If you build a house with a child, you can not only make a really beautiful and unique toy, but also a pleasant time to spend time with the baby and strengthen family communications.
The development of creative abilities and skill work with plywood. You can make the manufacture of a house with the whole family. If your daughter can express your wishes and decorate the rooms, then her brother can help in assembling the design itself.

Puppet house with original plywood furniture

There are many materials that can be taken as a basis for the manufacture of a puppet house. However, the plywood is most often used for these purposes. This is explained by a number of benefits of material for assembling a toy house. These include:

plywood is pleasant to the touch material, always warm, like all wooden toys;
under the compliance of the construction rules, the finished design will be released durable, and can be used even for the most stormy games;
plywood has a low cost, so it can be built in an inexpensive house, unlike the finished shopping option;
to work with plywood require accessible tools that will be found in each house;
the surface of the plywood itself is smooth and aesthetic, so it will not be necessary to further decorate the surfaces.

In addition, plywood is a safe material. However, when it is elected, it is necessary to pay attention to the labeling. The application of impregnating glue includes formaldehydes that are dangerous to health. Therefore, only the material with the E0 marking should be used.

Production of drawing

To build a house from plywood, you will need a detailed drawing with the sizes of all parts. First you need to decide on the exemplary design dimensions. Its size should be based on the wishes of the future hostess, as well as the size of the room in which the house will stand. In addition, it is necessary to think about the product shape and its style in advance.

Drawing of a puppet house

If a finished drawing is used, then it is necessary to remember that when changing the size of certain parts should be proportional to other dimensions. If the drawing is drawn up independently, it is necessary to include such data:

The rear wall should have a form of a rectangle or pentagon. The last option is preferable, because it will make it possible to make an original roof with beveled edges.
The base that should be slightly larger in width than the inner space. This will help to simplify the construction of the construction.
Overlapping the second and third floor that must have the same size and be slightly less than the base.
Side parts.
Partitions between rooms.
Elements for the manufacture of roofs.

Details of the assembly of a puppet house from plywood can be found from the video:

The dimensions of all elements can easily calculate alone by drawing a sketch on paper. To simplify work, you can use ready-made schemes by making the necessary adjustments.

Materials and tools

Making a house of plywood is a multi-step and complex process. One of the most important steps is to prepare and buy the necessary materials and tools. If you do this in advance, the process of making a house will pass faster.

For work it will be necessary:

Plywood. Main building material for making a puppet house. To calculate the required amount, it is necessary to calculate the number of parts and their area, add all the data according to the drawing. The resulting value should be rounded into the biggest. For a small house, there are three sheets on average, and for a huge palace for dolls, you may need up to ten sheets of material.
Corrugated cardboard. It can be used for the manufacture of the roof. This material can be replaced by a conventional cardboard or plywood.
Electric jigsaw. The optimal tool for working with plywood. Allows you to quickly cut the details of the desired size with the minimum risk of cracking and chip.
Carpentry glue. Excellent option for fastening parts from plywood. He dries quickly, does not have an unpleasant smell and does not leave marks on the material.
Mounting tape. It is recommended to use as an additional means to secure parts, especially in places where the strength and reliability of the design is required.
Saws. The main elements of the design for reliability can be further secured with the help of self-tapping screws.
Sandpaper. With it, it should be cleaned all the edges of the material to prevent injuries and cuts.
Roulette, ruler, simple pencil.

Additionally, you should prepare materials for decorating a house. To do this, you can use wallpaper or films that mimic them, colored paper and cardboard, film as an outdoor coating. You can also use pieces of linoleum, fabric, felt, laminate. Additionally, paints and glue will be required. Plexiglas or plastic should be inserted into the windows.

Making a puppet house of plywood

For the manufacture of a puppet house from plywood, first of all, it is necessary to transfer images from a sketch for Fanur. For this, the drawing elements should be printed or drawing manually, after transfer them to the sheets of material.

Cut parts should be used with an electrolovka, after which the edges need to be carefully treated with sandpaper, so that the edges of all parts are smooth and smooth. If the diagram does not indicate the windows, at this stage they need to be noted on the billets, cut and also handle emery paper.

Simple version of the doll house

After that, you can go directly to the house assembly:

With the help of construction glue and self-tapping screws, it is necessary to attach side walls to the base.
On the side walls it is necessary to mount overlaps of the second and third floor, as well as all the inner partitions. If the parts were cut not very carefully, and the slots were formed between them, you can smear them with a special putty for wood, and then paint.
A roof is installed, which can be cut from corrugated paper and the same plywood. If paper is used, it must be painted in the form of a tile. When using plywood on the roof, the roof tiles are pasted, which must be cut from colored paper, cardboard or other decorative materials.
Installation of interior decoration. For flooring, pieces of linoleum, carpet, felt or tissue can be used. Walls are covered with wallpaper, colored cloth, film or dyeing with a gouache.
Making furniture. For a house of plywood furniture is best made from the same material. In some cases, the use of finished furniture, which can be bought by sets or separately in children's toys stores.
Staining at home. It can be painted in various colors of gouache or watercolor. However, plywood is aesthetic material, so you can leave it without staining.

Additionally near the house you can make a small kindergarten, in which cardboard flowers and trees will grow. It will give toys even more gentle and beautiful appearance.

After assembly, the design will only decorate the inner space

Domika design

After making a frame, a frame should be decorated with various materials, as well as put the dolls in the rooms. At this stage, you will not need instructions, you can decorate a house in your own taste. However, useful tips can help in this:

walls and floor of a wooden house do not necessarily be decorated or placed by decorative elements;
for swing windows and doors, special small metal door loops should be used;
windows should be decorated with cloths fabric so that there are curtains.

In the finished house you can arrange your favorite dolls and other toys. Make a house from plywood is easy, and the joy of a child from owning such a toy is invaluable. Beautiful puppet house will also become a real decoration of the children's room.

Examples of a puppet house do it yourself from plywood

Any girl dreams of a house for his dolls. Now there are a huge amount on the shop counters. But there is such a pleasure for weekly, and the assortment of the same type.

We suggest to please the child with a gift made by your own hands. This will allow you not only to save money, but also make a house only in your own way.

In addition, it will be a great pastime for the whole family per hour of leisure.

There are many special training programs for the manufacture of doll houses with their own hands. You can use a wide variety of building materials: boards, fane, chipboard, laminate, cardboard, etc.

As a rule, the front wall on the puppet houses do not do, or make it a removable or opening, so that your child can carry the dolls there, change the situation in the rooms, to be seen.

Choose the material - and we will teach you how to make a puppet lodge with your own hands!

Puppet houses from plywood and laminate

These are the most popular materials. A distinctive feature from "fellow" is stability and longevity. It is easy to decorate both outside and inside. But the manufacture of such a house requires male strength.

If you try, then such a house will not distinguish from the store.

Schemes and drawings can be found on the Internet, but if technical deposits are present, you can try to draw it yourself. On the Internet there are photos of ready-made puppet houses.

For the manufacture of a house we will need:

plywood is thickening (from 7 mm.);
electric jigsaw;
glue;
floor self-keeper;
pieces of wallpaper;
roulette or ruler;
a pen;
scheme;
a little fantasy and patience.

We proceed to work, before it determined with the size of a doll house (they will depend on the dimensions of the residents):

from plywood or laminate, drink the walls of the future at home;
drink windows and doors in them;
glue the walls among themselves, it is also fashionable to use construction nails or brackets;
we make a roof, it can be flat and lowered. To give a real view, you can use corrugated cardboard, and then paint it;
we fasten the resulting design with the foundation - sheet, great than the house itself. On an unused plot, you can make a flowerbed, sidewalks, a platform, parking;
glue wallpaper and stelim floors;
we furnish the house furniture;
you can also add curtains made of pieces of fabric, bedspreads, palaces, etc.

Doll houses made of drywall

Many household parents after repair leave the remaining building materials to dust on the balcony in the hope that they will someday be useful. Their hour has come! Of the drywall, a great dollhouse can be obtained.

There is a good house from this material by the fact that it is very easy and easy to assemble. But, at the same time, it will be necessary to contact him - it will be quite fragile.

The scheme of such a house is no different from the product from plywood or laminate. But to collect such a house is much easier, and the options layout are much more - with the help of partitions, the premises can be divided.

Foam houses

To build such a house we will need:

Note!

sheet foam;
glue;
wands for canapes;
line;
bamboo sticks;
cardboard;
pieces of wallpaper and fabric;
paint;
sponge for washing dishes;

Pinnotes for ceiling

Getting to work:

we make a scheme;
cut out of the foam wall;
we produce doors and windows in them;
we connect the walls with the toothpicks, then squeeze the walls between themselves;
for the strength of the roof, we first set the bamboo sticks over the walls, and only then we glue the roof to the walls;
from wooden lines or the same foam we make a staircase;
for railings, you can also use toothpicks;
in addition, at the request of the foam, you can also make a balcony, massandra or even a terrace;
krasi house;
inside, decorate the house as in the previous description.

Dominics from bookshelves and cabinets

The house from the old furniture will not make any difficulty - after all the walls are ready.

It remains only to cut into them windows and doors, and think about what to make a roof, if necessary.

It can be performed from the materials described above. We put the furniture, let's let the cat - with the newsself!

Houses from Cardon

For such a design, we will need:

Note!

cardboard;
templates of house details;
scissors and stationery knife;
gouache or watercolor paints.

Build a house:

if you have a big piece of cardboard, then you do not cut it, and bend in places according to the scheme, and then glue its components.
we establish interroom partitions from cardboard, they will serve not only to distinguish between space, but also fasten the frame design.
start repair and setting!

House of boxes

The easiest and fast option. It is enough to choose the desired number of boxes (depending on the number of rooms), fasten them with each other with a stapler, pre-laying them on the side so that the top of the box serves as an outlet.

This will allow you to open the front wall at the right moment to make the permutation, to strengthen, etc.

Cut the windows and doors. We proceed in the design of the frame.

Note!

House of folders for papers

For it, four folders are needed. We glue them from the inside by wallpaper or printed on the printer with sheets of decor and household appliances in the plane.

Cut in the windows folders, set the folders vertically, fasten them with the clips that each folder are available. Your house is ready.

Fabric house

This option is good because it practically does not occupy space, it can be addressed at all.

With the help of a tight piece of fabric, we make the back wall - it will serve as a foundation. We sew a rectangular base for a house. We make pockets to which the cardboard will then be mounted for floors. To both corners of the pockets are drift.

It remains only to sew pockets with a rectangular basis from one edge so that the testers are from the reverse side. Floors with ribbons and sew the rear walls. We make a house and start playing!

You can make houses from other materials - the main thing to show fantasy! He will be a wonderful gift for a boy - after all, you can build a garage, parking, etc.

Stock Foto Puppet house do it yourself

The dream of any girl is a big beautiful dollhouse, equipped with all interior objects, very expensive pleasure.

Not everyone can buy it in the store.

However, you can make a puppet lodge with your own hands, and if you attract your daughter to the process, the joint work will bring the pleasure of the whole family.

In order to proceed with the manufacture, you must first resolve the issue with the size and material of the future design. Then make a project of the house, make drawings for drinking or cutting, thinking out and pick up materials for finishing, consider bonding options and setting the entire structure. It is important that she was stable and could withstand small "shocks."

The size will depend on the height of dolls, which will "live" there, as well as on the possibilities of the room. After all, the apartments on half the room will take too much space, limiting the hostess.

At the same time, a very small design will be more complex in manufacturing and finishing, because it is not easy to work with small details.

For ease of use, the height of the ceilings is installed at the level of double-growing dolls, then it will be easy to move it on the rooms and installed inside. Higher ceilings are just welcome, they will make the game even more interesting.

The depth of the rooms is determined on the basis of the growth of dolls and the need for a free space for items inside the house. On average, it is 30-45 centimeters, but may be more. The width is calculated on the basis of the number of rooms for dolls and room volumes.

The shape of the house is usually reminded by a rectangle, elongated in height or width, it all depends on the manufacturer's imagination. For a large design, you can use furniture wheels that are screwed from below and make it easy to move the housing for dolls to any place.

You can create a project on paper or using modern technologies, in the program on the computer, which will calculate the number of materials needed for the building.

An example of a standard Doll House Project:

In many ways, the size depends on the material, since not every raw material can save the shape and withstand the load. Let's try to consider houses from different materials.

Plywood or laminate

Plywood is a very good choice for making a puppet house. It is well holding the shape, strong enough, it is easily fastened with glue or self-tapping screws. It is convenient to work with it using standard tools, only after completion of the work it is desirable to clean it with a skin to make it smooth.

Phaneru is convenient to decorate with paper or cloth, and it is also durable. Laminate has similar properties, which is also often used to create a puppet apartment.

Example of a puppet diagram:

To create you will need:

laminate or plywood, with a thickness of at least 7 mm;
pVA glue, it can be replaced with carpentry;
electrolovik;
wallpaper remains that will be used to decorate walls, furniture items, and for sex you can use the self-adhesive film;
pencil for applying marks;
roulette or centimeter.

The manufacturing process consists of the following steps:

Drinking the wall of the design of plywood in size in the drawing.
Selecting places where windows, doors will be, drinking them.
Collection of construction with carbon black and small carnations.
Roof construction, its design. The roof of the house can be covered with corrugated cardboard and coloring, soaming thus tiled.
Fastening the design to the base is a piece of plywood having a little large sizes. This is necessary to impart the design of greater stability and the possibility of an additional decor. For example, on a wide surface in front of the house, you can organize a veranda or flowerbeds.
Decorating the inner and outer sides of the walls, gender. Sometimes it is more convenient to salary the inner walls before collecting the house, then there will not be visible joints, but in this case it is important not to make large screws, disrupting the proportions of the design.
Arrangement of furniture.
Interior decoration with small details: curtains, rugs, tablecloths and other things.

An example of a step-by-step house of house in the photo (instruction for dad):

Project Marking of the Future House Drilling Saving Revision Flying Filed Putty Grinding Finished Walls Painted Painted Details Marking for Fasteners Assembling Assembly Finished Design Interior Balcony Room

Plasterboard layouts

Plasterboard is also a popular material because of its strength and low cost, because it often remains after repair in the form of small pieces that have nowhere to attach. Barbie's house is the perfect option for this. However, it is harder to fasten it, the adhesive is good here, it will be necessary to align the place of the cut to reduce the consumption of the means.

Self-tapping screws twisted in metal corners will be more efficient. But they will need to take small sizes or then sprinkle the tips sticking outside.

The scheme of working with plasterboard is similar to the design of plywood, the tools for it are needed the same. Therefore, you can use the scheme above.

Styrofoam

This material is also from the discharge of the budget remaining after the purchase of household appliances or other goods. His only disadvantage is fragility, so it should be carefully working with foam.

For work you will need:

polyfoam, preferably large sheets;
toothpicks, bamboo sticks (remain from sushi sets);
glue pistol;
several wooden lines;
corrugated cardboard;
wallpaper remains;
sponge of foam
remnants of ceiling plinths;
accessories for creating an interior.

The manufacturing process will be presented in stages:

Project development, drawing up drawing.
Cutting foam according to the drawing data, it is better to do a hot knife, then the foam will be less crumble.
Cutting future windows, doorways.
Assembly. To do this, you will need toothpicks that need to be broken in half, copper pieces of foam, between them, apply glue and press it tightly.
The gluing ceiling and floor occurs also with a glue gun, only to harden the designs need to be strengthened. For this, bamboo sticks are used, which are glued to the foam in the form of transverse beams.
Separately built an inter-storey staircase, it is made of wooden lines or the same foam, and the railing of toothpicks or bamboo sticks. After that, ready to go into the design.
Production of the roof, material for which foam or corrugated cardboard can serve.
The decoration from the outside includes painting the entire building of the acrylic paint, which is convenient to apply a foam sponge with light tangent movements. Outside, a balcony that is assembled similar to the stairs can be performed.
Finishing from the inside, it uses pieces of wallpapers and colored paper for it, from the ceiling plinth, you can cut window sills and other interior details. Curtains, carpets, small decorations will add comfort designs.
Arrangement of furniture, settlement.

Bookshelf or rack

It is not necessary to purchase materials for the manufacture of housing for dolls, sometimes it is enough to use interior items that are no longer in the go. So, the old bookshelf or the cabinet may well become housing for Monster High or a small princess.

At the same time, the scope of work will be minimal: it will only be necessary to close the rear wall of the house and equip the internal contents. Details such as the roof and chimney, for the design, standing at the wall, can generally be drawn or depicted with adhesive tape.

Old cabinet or chest

Old bedside tables, dressers, wardrobes from wood can also be used in the attic or in the basement. They are much better suitable for large dolls and require minimal processing.

Internal shelves, boxes can be removed by creating thus large rooms. Or, on the contrary, add partitions between high ceilings under the height of the dolls used. And of course, finishing, which will give the product a finished look.

Cardboard

The popularity of cardboard is quite explained, it is inexpensive, easily going, is always available. True, this design is short-lived, because the cardboard breaks and rifles. Therefore, it is better to use corrugated cardboard that is used for packaging.

The house from it is going to quickly and easily from the primary materials:

corrugated cardboard;
finishing elements;
fabrics and other things.

Tools that will be needed in work:

drawings, detail templates;
knife, tassels, paints, pencils, markers;
glue pistol;
rule and others.

Photo scheme:

Photo of a house:

The assembly process is simple and similar to other constructions, but the cardboard has some features: it is easily lightning, so it is necessary to crush it carefully. Bashed better with glue, with this edges are not trimmed, but bend inside and act as a fastening element.

To bend the cardboard correctly on this place, you need to spend something pointed, but not cutting, for example, a pencil. A groove is formed, according to which the material will easily bend.

Cut details like windows are better than a stationery knife on the outlined lines.

Boxes

Cardboard boxes is the easiest way to assemble a dollhouse for a girl. To do this, you will need to go to the black outlet of the nearest store and dial closest boxes. This will allow faster and easier to collect a house.

Then you need to be copped with a glue or bilateral tape. Cut windows and create an environment. External finish can also be performed from boxes, such as a balcony or terrace.

Fabric

The fabric house is a good option for a small room, as it can develop and clean for a while. For its manufacture, a dense fabric will need with various drawings and the skill skill.

The design is collected from the fabric according to the scheme. Each element is sewn separately, then turned out and fastened into a single house. To seal the walls, you can use a cardboard or a plastic mesh, which is placed inside, they will not give the walls to bend, make all the product more durable. However, the house with a cardboard can not be washed.

Video lesson on creating a house of fabric and cardboard:

How to make a staircase for a house or castle?

The staircase in a puppet house is one of the most complex elements, a real task for dad. The easiest way to make it from cardboard or foamflast. The first can be simply bend to the desired position, and then strengthen the intermediate parts using the same foam.

Wooden staircase can be made of two lines and several strokes. On the rules at equal gaps, it is necessary to apply small cuts, in which at an angle of about 45 degrees are inserted from small pieces of wood, which are attached to glue into one and immediately into the second line. Wide rules can perform the role of railing.

The foam staircase can be cut out of a piece if there is a sufficiently large bar. It is placed at an angle and a hot knife drank steps. Real masters can build a staircase from wooden bars on special drawings.

Examples of stairs in the photo:

Interior arrangement - Toy furniture and decor

Interior arrangement is a real holiday for the girl, so it is worth inviting it to help in the design of the interior and the manufacture of furniture. The latter can also be very diverse. The most accessible option is a cardboard.

For decoration will go all that is in the house:

wallpaper remains;
pieces of fabrics;
beads;
artificial flowers;
toothpick;
cardboard boxes and so on.

It all depends only from the manufacturer's imagination. Beautiful curtains, bedspreads, tablecloths, even paintings on the walls can be made independently. It will not require a lot of time, but will delight and help attract the girl to work on home and sewing.

Video lesson to create furniture from plywood:

Video lesson for the creation of foam furniture:

Lighting

Make lighting in the house seems almost impossible, because the connection to the network and the presence of wires is far from safe. Especially if the dwelling is made of wood or cardboard. In case of closure, a fire is possible.

However, there is a simple secure solution - small LED bulbs running from batteries. They have a very small tension, and the fastening is simple - with the help of bilateral tape.

Creating a housing lighting for dolls:

Making a puppet house - a fascinating and long process in which not only parents should participate, but also their children. Even a small child can make small details or hold the tools. At the same time, collaboration unites, and the surveyed skills are aroused by children much faster and the process will be interesting.

Examples of puppet houses in the photo.

Hello everyone! Tell me when you give your crumbs to the toy, do you think where she will live? Believe me, the baby thinks exactly about it. And all because he projects his life on them. He is played during the day, like a toy, but the evening comes and the little must go to the crib. What about his ward? What to do with him? To deliver your child a pleasure, continue the game and teach Karapuz to order, let's find out how to make a house for dolls from the box with your own hands.

Preparation for the creation of an apartment for dolls

Before proceeding to work, decide what exactly you will create. In the box "Walls" already exist. It remains to make them similar to the place of residence. Dimensions of the house can be different: it can be a two-story or one-story, with one or more rooms; Brushed homemade or purchased furniture.

What materials and tools will be needed for work:

Cardboard boxes;
Glue;
Colored paper;
Scissors;
Pencil;
Line.

When everything you need is assembled, you can start making.

First house

I recommend stretching on a small house from one room. Then he is not so sorry to throw it, and children quickly all bother. Look at what kind of cute and comfortable, although small. Pictures are increased by clicking.

But what a little cute house, even without wallpaper, it looks worthy, but what if you hang the curtains, throw a couple of pillows, lay a carpet? By the way, the carpet and pillows are easiest to do from felt. And not necessarily sew! Felt is easy to glue with a torque or hot gun.

As soon as you get tired, you can build at least a castle, at least a country villa. You already have experience, hand naked.

"Build" a house

From me a detailed master class with a photo. I hope he will help you!

Karapuz help will fully depend on how interested parents are interested and involved in the process. Therefore, manifest your creative processes, prepare a fairy tale or an interesting story of your crumb. Tell him a certain job or ask him about the crafts.

Furniture

Of course, the furniture dolls are simply necessary! Yes, and playing with an empty house is not interesting. What can you come up with?

Bedroom furniture

Bedroom furniture can be made of paper in origami technique, glue from cardboard and repent, but the most cozy and beautiful option is upholstered furniture from cardboard, foam rubber and fabric. It is possible to glue everything on the usual PVA, though to dry it will be long. Instead of the foam rubber, you can take a synthet or batting, on the extreme case of cotton.

Bed MK

Step-by-step photos of manufacture - increase when clicking:

Chairs

Photos are increased by clicking

Kitchen

The kitchen can be filled with a fridge, stove, worktop, beautiful chandelier and dining table. Cardboard and ice cream sticks are suitable as materials.

If there are 3 d handle, then you can make furniture from plastic.

Cardboard stove

Lockers

Lockers, shelves, fridge just make from cardboard. Bloom comfortably hot glue.

Furniture for kitchen

Furniture - chairs, the table is very beautiful from sticks from ice cream. You can cut such wands with large scissors, just carefully, they can crack in half. You can glue the glue times or hot.

Trivia for kitchen

You can land in the kitchen bird in a cage, put a box with fruit or with flowers. Detailed master classes in the photo. Increase in clicking.

Fruits, vegetables, dishes

Fruits, vegetables, dishes are easiest all make from plasticine. In order for the product does not get dirty and did not lose shape, it is covered with a transparent nail polish.

You can make vegetables from salt dough - They dry and look like a toy store. From Play Blowalso make meals, but after drying the play, it gives cracks. Therefore, I prefer to make salt dough: 1 cup of flour + 1 cup shallow salt + water, kneading very cool dough.

Also a very good option - air self-hardening plasticine (new material). It is cheap, bright when it is frozen elastic than it looks like a solid rubber. Lepim like from ordinary plasticine and leave to dry overnight.

Interesting ideas for a puppet house

Some toys are already included with the house, for example, the lol dolls it is just fabulous. From it you can copy some ideas. For example, the fact that the apartment is not limited to only the area of \u200b\u200bindividual rooms, and the lower floor usually performs. And you can do at all the courtyard in front of a house with a chaise longue and flowers.

Another interesting idea is a bag house. This option is especially convenient when you plan to travel with kids. It is only necessary to attach a handle and "shutters", which close the house, and the mobile version is ready.

If you like to sew, then the perfect version of the soft bag is a fabric house.

And one moment. Have you thought that your handicraft is just the beginning? Over time, all new and new rooms can appear in which other toys will live.

Create, please the baby and wonder how the talented kroch you have! I hope you enjoy spending time with your child, and you can develop your friendship with him. I suggest and with our site make friends so to always be aware of the last articles! Subscribe and receive messages about what you can read on the site. Do not forget to tell your acquaintances about what you will find out.

To new meetings. Bye Bye!