We make your hands the ceiling "Starry Sky". Starry sky at home: beauty and calm sky on the ceiling do it yourself

Look at the stars before bedtime - that romance, which most of us, having not even roof, but just a ceiling above their heads, have long been deprived. If you dream at least about the attic bedroom, but so far these dreams have become a reality, the starry sky can be treated on the ceiling. Methods are somewhat, the most popular and spectacular we describe below - choose suitable and forward, to the stars!

Painting with fluorescent paints

With the help of glowing paints, you can make not just a starry sky on the ceiling, but a whole space! True, for this task you will need any artistic abilities or a guest artist. With simple asterisks, any newcomer will cope in drawing.

There are several options for implementing this idea:

• Draw in conventional fluorescent paints. Then the drawing will be visible even during the day or in the light of ordinary lamps, and at night will become luminous and acid-bright under the light of the UV lamp.
• Draw invisible fluorescent paints. The day the ceiling will be the same white as usual, and when the UV lamp is turned on, the drawing will show itself in all its glory.
• Draw with luminophore paints. In the afternoon, this drawing will be barely noticeable, as the paint is almost transparent. She absorbs day and artificial light, after which it glows in the dark without UV lamp. The more the light got the drawing, the brighter and it will shine longer in the dark, so the idea is suitable only for solar or permanently illuminated premises. Of the minuses - the reduced brightness of the glow and only two colors (blue and yellow-green).

To simplify the task, you can first print the card of the star sky or liked the space of space on the self-adhesive film and apply to the ceiling, and then separately add luminous paint on asterisks and comet. Instead of a film, you can use a tension ceiling with a photo printing of the night sky.

Ceiling panels with built-in backlight

The ceiling panels "Starry Sky" is a large flat lamp that is mounted on the ceiling almost like a chandelier. The panel causes a drawing of a night sky or space, and the light is located inside, which highlights the drawing and revives it. The side sides of the panel are also shoved muffled light, often color, which helps to visually dissolve the boundaries of the lamp.

With such panels, you can cover the entire ceiling, but then the light will be too bright and not suitable for the bedroom. Therefore, one panel is usually mounted.

Fiber fiber fiber

Fiber optic threads stretched through a stretch ceiling very realistically. To do this, you will need to install the light generator in a convenient place: the threads will eat from it. The tips of the threads are removed through holes in the stretch ceiling, each tip forms an asterisk. The threads can be brought to a big length - the effect of comets is possible - but it is possible and not at all through the canvas, only the tips in it: the light will be softer and mysterious. For the brilliant effect on the tips of fiber optic threads, you can wear crystals.

The method is very laborious, without professionals, it is not enough here, and the price will be rather big.

LEDs in a plasterboard ceiling

With the help of LEDs, you can decorate part of the ceiling by stars. Small LED light bulbs are attached in advance prepared holes of the plasterboard design, and then connected to the general wiring. To avoid unnecessary brightness, the light saturation regulator is connected.

The way is expensive and complex in installation, as well as too bright for use as a night light in the bedroom, so LED stars usually make out the living rooms and use them as the main lighting.

Modern technologies that allow changing the color of the lamps and even create the visibility of movement, can make your starry sky on the ceiling by a real masterpiece - as in this video.

Photos: Potolok-zvezdnoe-nebo.com, Potolokspec.ru, Davner.ru, kaksdelatpotolok.ru, koffkindom.ru

Decorating the ceiling surface with the "Star Sky" system - an original and spectacular solution. Installation work can be performed. Check out the existing installation techniques, select the most appropriate and stick to our instructions.

The content of the article:

Properly organized indoor lighting can perform different functions. Bright spotlight is considered suitable for the working environment. Soft and muted usually used to create a romantic mood. Some types of lighting are the main in the room, others are exclusively decorative. The second option is the "Star Sky".

Methods for mounting the starry sky on the stretch ceiling

Such lighting looks very impressive in the dark. It is used for an additional bedroom or living room decor.

The installation of the stretch ceiling "Starry Sky" is performed in several ways:

• Optical thread. Lighting equipment is expensive, but it is absolutely not heated, and the fibers are performed only light (no current). The service life of products is about 10 years. In this case, fiber optic differ in low power consumption. In general, other disadvantages, except for high cost, non-optical threads were found.
• LEDs. Optimally suitable for creating colorwomen. Can change color, almost not heated when working, economical and safe. However, compared with the term of the tensioning structure, the LEDs are short-lived. They will serve about 5-6 years.
• Luminescent paint.. In this way, you can create not only the shape of the starry sky on the stretch ceiling, but also draw planets, comets, moon and other space objects. The paint will be visible only in the dark. The advantage of this method is in the ability to apply to the surface of any color and with any image. The disadvantage of this method is the impossibility of adjustment. Luminescent paint glow can not be turned off if desired.

There are other ways: phosphoric stickers, photo printing, art painting, Swarovski crystals, however, we consider the most common.

Star sky on the stretch ceiling of fiber optic

The design is a light generator with a remote IR receiver of the control panel and a beam of threads of different diameter. The projector can choose a single-color, creating white glow, and color. The latter can be used to create different effects.

Installation work is performed as follows:

1. We design the arrangement of stars. From it will depend on the length of each thread. Almost 700 fibers with a diameter of 0.75 mm are placed in one cable. The optimal density is 80-150 threads per 1 m 2. At the same time, one star may consist of even 15 fibers to ensure flickering. You can also make stars of different diameters.
2. We make the layout of the canvas around the perimeter of the room. The distance from the basic ceiling when used fiber should be more than five centimeters.
3. We equip the place of installation of the projector for the starry sky in the stretch ceilings. To do this, you can make a plasterboard design under the ceiling or a special niche.
4. Fix baguettes to pull the canvas.
5. Under the ceiling, we fix the usual fishing grid for fixing the fibers so that they do not create pressure on the canvas. For the same purpose, the sheets of plywood can be used, which are attached to the additional framework.
6. Take the thread and plug them to the projector.
7. Fix in the profiles of the canvas.
8. Soldering iron with a needle at the end we make holes in the stretch ceiling and produce fiber, fixing them with glue.
9. Speakers cut off and gently grind.
10. If desired, the opening can not be calcined. In this case, the light of stars will be more muted.

Please note that the fibers need to work very carefully. You can not allow the beggars or damage to the threads. This will inevitably lead to loss of light or equipment breakdown.

Using fluorescent paint for the starry sky on the stretch ceiling

This method is suitable for both a monophonic canvase, and for multicolored, because the paint is invisible. In addition, its use will cost much cheaper than the arrangement of the starry sky for another technology.

In the process, adhere to the following instructions:

• We draw on Watman or dense cardboard the shape of the objects that will be on the starry sky.
• Fix baguettes and stretch the ceiling.
• After pouring the canvas and ventilating the room with luminescent paint, the objects are applied. You can do painting both on fabric and film coatings.

How to make a starry sky from LEDs on the stretch ceiling

Usually, LED lamps are used in conjunction with fiber when mounting the stretch ceiling "Starry Sky". LEDs are distinguished by bright light, therefore are optimally suitable for creating several large stars or moon.

Selection of LEDs for Starry Sky on Stretch Ceiling

The flicker mode is created using a special controller. It should not create a sharp and discouraged flashing. Optimally use model with a smooth transition.

The frequency of flashing should not be 0.5 Hz (1 in 2 seconds), 2 Hz (2 in 1 second) and 7 Hz (7 in 1 second). These frequencies correspond to the alpha and teta-rhythms of the human brain and may cause nerve disorders and even epileptic seas. When choosing a projector, you need to pay attention to the noise issued when working, especially if the installation is planned in the bedroom.

As for the color of the stars, it is possible to create different color effects of the starry sky using the RGB controller in the stretch ceiling. However, it is necessary to carefully approach the selection of colors, because each shade has its psychedelic effect: Salad and green - relaxing and soothing colors, orange and yellow - mentally neutral, turquoise and blue - pacifying tones, blue - straining color, red - alarming and exciting color .

Before making the starry sky on the stretch ceiling, you need to think over the other light sources. To do this, you can use point lights, backlighting individual decor elements, such as mirrors, or stationary chandeliers. In any case, the Starry Sky is a decorative effect, and the main lighting in the room will still be needed.

With the help of a properly selected flickering of stars, you can even create the effect of the movement of cosmic bodies.

Instructions for mounting the starry sky from LEDs on the stretch ceiling

If you decide to install a stretch ceiling with a starry sky effect, follow the following instructions:

1. Preparing a scheme-drawing of accommodation on the ceiling of individual lamps.
2. Fix in a special ceiling niche LED projector and eight-section controller-breaker for the effect of blinking.
3. We glue to the basic coating with construction silicone LED lamps. Plus diode usually has a big length and is indicated by the key.
4. We put on every conclusion of the Cambrick. This is a special insulation tube.
5. Check the serviceability of the system.
6. At a distance of 15-20 cm from the lamps fix the baguettes for the canvas.
7. We stretch the ceiling. It is desirable to choose a translucent film to create an original effect.

By creating LED flickering, you can use individual items to create the moon and other space objects.

How to make the starry sky on the stretch ceiling - look at the video:

To equip the Stretch ceiling "Starry Sky" with your own hands - easy, but quite expensive. The cost of fiber optic threads is almost 10 times higher than the middle price of the canvas itself. However, such an effect will help create a romantic situation and surprise guests. Adhering to instructions, all installation work can be performed promptly and efficiently.

Everyone likes to look at the Star Sky. It fascinates beauty, pacifies and configures on relaxation. Sometimes I want all this beauty to be on the ceiling above the bed, then you could admire it all the time. Modern high technologies can provide a realistic picture of the starry sky right on your ceiling. And you can enjoy the wonderful view of the night sky at any time.

If you find out in detail the process technology, you can create a starry sky on the ceiling with your own hands. Even if you are limited in the means - not trouble, because there are different options for mounting such a design, designed for any wallet and taste. There are inexpensive ways, and there are quite expensive and difficult with flying comets and special effects. How to collect such a starry sky with your own hands, consider further.

The easiest version of the star ceiling

The cheapest way to create constellations on the ceiling is to draw them luminous paint on its surface. It is convenient for the low ceilings for low ceilings, as the construction of more complex structures requires an additional decrease in its level.

To add a white ceiling of originality, you can draw it not only the starry sky, but also clouds flying comets, airplanes, etc. It is possible to perform a drawing using a graphic editor. Then take it to a firm that prints images on Oracal film. This self-adhesive film is quite strong, convenient when installing. It is the maximum in the width of about 2 m, so the image will have to be divided into elements.

Before printing the image, type a test sheet should be printed to check the brightness and quality of the paints. If the print quality arranged you, then proceed to print your drawing.

At the initial stage, it is necessary to prepare the ceiling, align it and squeeze. After the ceiling is dry, proceed to gluing the film. It is pretty easy to do: you need to tear the protective bottom layer and attach a sheet to the ceiling, pick up and rolling with something to get a smooth image and so that the air leaves from under the film. The canvas join each other by the allen.

The next stage is the applying of glowing stars on the ceiling. To do this, take luminescent varnish or paint. Caedically draw on the ceiling of stars in the form of points or klyax of various sizes. As a result, it turns out that the day will be visible in the afternoon, printed on the film, and at night glowing stars will appear.

This method will cost within 100 y. e., and you can make it relatively simple and fast, especially if you call for help relatives and friends.

Stretch ceiling with star sky

A more complex system with shining stars will be able to imitate the mounted ceiling with threads that freely spend the light. It can be done using plasterboard sheets, which will serve not only by the base for the starry sky, but also the place where the wires can be hidden. For the construction of such a ceiling, you will need:

• light generator;
• flologist with photo printing or without;
• fiber fiber;
• lED controller;
• remote.

Consider what kind of mounted ceilings are suitable for creating a starry sky on its surface:

1. Hinged ceilings made of PVC film are used most often, as they are easiest to be applied to the photo printing. According to the structure, the film can be a glossy or matte. The canvases are most popular, which, with the help of photo printing, apply drawings with the image of space.
2. Tissue mounted ceilings are distinguished by the fact that their drawing is used as a sample of fiber-optic string. The picture of the starry sky is applied to interior stamp. The advantage is the fact that the tissue ceilings can be applied to the telescope. And also that there is no need to heat the cloth before it is installed.

Pretty ceiling version using fluorescent paint

Hinged ceiling Similar to the previous option can be covered with Oracal film. Stretch ceiling, however, will be required, however, it will take about 30 mm space. Any picture may be on the canvas: the sea, the green forest, the clouds, etc., the tops or smears of glowing paint are applied on it, which will shine in the dark as the stars.

It can be done differently: type the night sky with space objects on the canvas and decorate their luminescent paint.

The construction of the construction of the stretch ceiling with a starry sky on a polyvinyl chloride film is made according to the following steps:

• using the level, the lowest angle in the room is determined, measured 30 mm and put the label;
• copy the mark and all other angles and connect them to the reference level;
• with the help of screws for the marked line, the profile is fixed under the stretch ceiling;
• it is important to intend profiles in the corners correctly;
• the heat canhell heat the room;
• unwind the cloth of the mounted ceiling from the film;
• material is warm to optimum temperature;
• fasten the first corner of the canvas in the baguette, snapped into it the fastener and stretch the film to the opposite corner diagonally;
• the opposite corner is also fixed and the remaining two is similar;
• after all the angles are fixed, the edges of the canvas are fixed using a construction spatula;
• on the finished fixed tension ceiling with special glowing paint applies stars, comets, planets, etc.

In the afternoon, paint will be unclear, and with the onset of twilight on the ceiling will begin to appear shining stars.

Pretty ceiling option with fiber and light generator

Play the way to create a starry sky on the ceiling using fiber optic threads and a light generator - a rather difficult task. If you order specialists to fulfill such a decision, work will cost several times more expensive than the components of the system.

The projector or the light generator serves as a light source, it is hiding under mounted ceiling or for furniture, and sometimes in another room. If the projector is installed under the web, then the rays need to be directed parallel to it and perpendicular to the fiber-optic threads.

Halogen projectors have a lamp with power up to hundreds of watts. The period of operation of this light bulb is small, so the device must be installed in an easily accessible place, where it can be easily changed. The projector can create a uniform luminescence of the end parts of the filament of fiber and produce the effect of shimmering stars, it is achieved using a special shiny element. There are projectors that are highlighted with fiberboard only with white light - monochrome, and there are those shine at once with several colors.

LED projectors do not require light bulbs much longer than halogen. They can only emit one or different colors. There are also models that smoothly change the color or static burning.

To create additional special effects, you will need to still install a laser projector. Using it on the ceiling, you can simulate the following phenomena:

• flying comet;
• starley;
• movement of galaxies;
• starred explosion;
• glow of some constellations;
• the movement of the planets around its axis;
• polar Lights.

Fiber optic - the next important item of the starry sky on the ceiling. Bundles of threads made of fiber fiber connect to the projector. The end parts are permeated through the tension ceiling web. To create one square meter of starry sky, up to 140 holes for threads are made. Of course, the owner himself can change the number of holes depending on personal preferences. Through each hole, it can be done up to seven hundred threads. Stars may consist of 5, 9, 17 fibers. It is also important to cross section of each fiber optic thread.

After you have decided on the projector, fiber optic and materials for the stretch ceiling and purchased them, you can start mounting.

First of all, the projector is installed in a suitable place. If it is put behind the plasterboard canvas, then in a convenient place of the ceiling make a hole so that it can be easily reach from there. Then make markup under the baguette lowering the mounted ceiling by 150 mm. Above the fasteners are stretched by a mesh with small cells parallel to the ceiling plane. Through the mesh holes, the parts made of fiber for marking the future drawing. After that, the room warms up, take the canvas and attach it to the first corner. Then make holes in certain places under fiber. Dumplings can be made with a soldering iron with a spin or needle at the end. In these holes, the intended number of fiber-optic threads do, they should hang out at least 16 cm. From the wrong side, they are cut and leave only about 3 mm. Then fasten the cloth in the corners, the holes are performed and all the threads do. After that, they fix the cloth completely along all walls.

Upon completion of the installation of the ceiling, you can fix fiber optic bundles with superclaim, but it is optional. The thread cross section can be different - the larger the diameter, the larger the star it turns out.

Another option to implement the starry sky on the stretch ceiling is not to stretch the fiber across the cloth, but place the end parts of it from the inside of the fabric base or film. Of course, the stars will not be so bright, but in the daytime there will be no sticking threads on the ceiling. To make a star glow brighter, you just need to apply fiber with a cross section that is thicker from 1 mm.

Embodiment of the starry sky on the stretch ceiling using LEDs

This method is an improved version of the previous version. In addition to the tips of fiber fiber filaments, LEDs are fixed. They can have different power and allow space objects to shine more richly light, and do not spoil the general view of the ceiling.

If you apply the version of the starry sky without the filament threads through the cloth, the LEDs will also provide a brighter glow.

RGB controllers are available on sale, with the help of which the color of the constellations can be changed and create interesting special effects. A special remote remote control is bought to control such a starry sky.

Use Swarovski crystals for ceiling Starry sky

For luxury lovers, there is a way to decorate the ceiling and give it an extraordinary radiance of stars with the help of Swarovski crystals. They greatly dispel the light coming from filament from fiber. The crystals are attached to the canvas using reinforced rings. Punches of fiber optic threads with LEDs are inserted into the crystals. This complex of elements provides a very beautiful and natural radiance of constellations on the ceiling. The size of the diameter of the light spot from the Swarovski crystal is from 10 to 30 cm. In the daytime, they also look very impressive and original. The perfect canvas for the design of such a ceiling is suede.

Which of the listed options to choose, solve only you. Of course, the more the cost of the stellar ceiling, the greater the effect you will receive. If you do not want to search for a separate light generator, a remote control, fiber and other elements, there are whole kits that are already equipped with a certain set of details for different taste and wallet.

Despite numerous attempts to conquer space, distant stars still look at humanity with a mockery: they will not open their secrets to anyone. Russery of glowing points on the dark canvas of the sky is not different as magic, do not call. And from the "piece" of space with Miriadami galaxies on her ceiling, few people refuse.

Star sky is a popular and very spectacular way to finish the ceiling today. However, obviously fearing the big waste, many connoisseurs are wonderful refuse to decorate their home. The article will tell you how to make the ceiling of the starry sky with your own hands, without resorting to expert services.

The basis for mounting the starry sky

Practices converge in the opinion that the best basis than the design of the stretch ceiling, not to find for the starry sky. They explain their position like this:

• stretch ceilings make it possible to work on an ideally smooth surface;
• using the PVC film and photo printing, you can achieve colorful realistic effects that affect the imagination not only at night, but also during the day;
• stretch ceilings have long won consumer confidence in their practicality and ease of installation. And they are like their reliability in abnormal situations (for example, when flooding from neighbors from the top floor).

Plasterboard suspended ceilings are also good as the base for the starry sky, only require more effort, time and additional expenses: they need to be painted or glued specially prepared film.

Methods for installing a starry sky on the ceiling

A variety of options for creating such beauty exist thanks to a huge range of modern finishing materials that satisfy the possibilities of any wallet. What is the most convenient and appropriate method, you must decide for yourself. Note that different installation options give different effects depending on how much the ceiling is the starry sky in the execution you selected. Let's get acquainted with both cost-effective installation versions and a premium ceiling decoration.

Optical fiber

If you, by all means, decided to make a star ceiling with your own hands, but do not possess special skills, try working with fiber. This is a fairly simple way to see a night flickering sky without leaving home.

The ceiling need to install a projector that works from a halogen or LED lamp from which the nutrition of hundreds of filaments from fiber optic. With luminous plastic threads, the ceiling is powered by imitating the accumulation of stellar points at the night sky.

Advantages of optical fiber

1. Not a source of ultraviolet.
2. Not exposed to heating.
3. Does not miss the current.
4. It has a long service life (more than 10 years).
5. It is characterized by modest electricity consumption (10 - 50 watts).

Disadvantages: High cost. For example, a beam of flexible LEDs, consisting of 188 yarns, and the installation of this fiber optic system into the surface of the suspended ceiling "turns out" in the amount of about 7500-26000 rubles.

How to make a stellar ceiling based fiber?

First of all, check out the list of necessary materials and tools:

• lED or halogen generator;
• a beam of long optical LEDs;
• plasterboard, supports and profiles for mounting suspended ceiling;
• watman high density;
• glue;
• cable;
• acrylic paint;
• screwdriver;
• drill;
• brush and paintopult.

note

1. Burning the LEDs is too impossible. To avoid this, you need to calculate the maximum possible radius of the bending of the fiber fiber thread, namely multiply its diameter by 10. So, the maximum arc radius for the LED 0.8 mm will be 8 mm.
2. The permissible heating temperature of the optical fiber is no higher than 70 ° C.
3. Contact threads very carefully to not harm them. Mechanical damage strongly reduces the quality of light.

How to make a suspended ceiling of the starry sky from the wholesale fiber

1. Make the ceiling markup to install the frame, using the profiles intended for drywall. Then attach the projector to the ceiling surface. Now collect the frame for the suspension ceiling.
2. Drill in drywall holes in size of 1.5 - 2 mm. For efficient design, each square meter should have to 65-80 such holes. Ready? Start inccribed fiber optic threads into the holes: a different amount in every hole to achieve a more naturalistic and spectacular effect. As a result, you should get a canvas, combining both the large bright clusters of celestial luminaries and modest lonely sprockets, giving a barely noticeable glow.
3. Cut the frame with plasterboard sheets, after selecting where to leave the hatch in order to get to the projector. Connect the bundles of fiber to the projector.
4. When the main, time consuming, part of the work is completed, time to paint the ceiling acrylic paint. For consumer effect, make an additional backlight using the LED ribbon around the perimeter of the room.

Listen to the Council!

Create a pattern by template is more convenient with a tight watman sheet. Apply on the paper the desired shape and cut out the drawing. Now glue the desired Watman to the ceiling by paint tape, and paint the surface of the ceiling through the needlework stencil using a brush or ankle.

Installation of stretch ceiling Starry sky from fiber

The principle of installation is the same as in the case of a suspended ceiling, but some differences are still available.

1. So, attach the projector to the ceiling. In the perimeter of the room, set the profiles for the installation of the stretch design, pre-retreating from the ceiling surface by 5 to 7 cm.
2. Using the drawing, make the starry sky projection on plywood or plastic sheets. And some advise for this purpose to use a network woven from the fishing line. When the projection is ready, drill on a piece of holes, inserting several fiber filament into each hole for each hole. Then the sheets are broken with threads attach to the concrete surface - make the so-called false ceiling. Connect the thread to the projector.
3. Now do the installation of the tension ceiling cloth. With the help of an air gun, he heat the PVC film, stretch it and mount it into profiles. In the stretched canvas, make holes - for this you will need a small soldering iron with a wire at the end. To do not look for a thread for a long time, turn on the projector. Now pull them out through holes in the stretch ceiling, cutting superfluous. By the way, the canvas can be left and the whole, but the glow of the thread will not be so bright.
4. If you want the most spectacular to issue a tight ceiling of the starry sky, the cost of materials should not confuse you: you will have to additionally buy LED lamps and reflectors. They will be large and bright stars on your ceiling. Do not forget to leave a hatch for servicing the generator. The design of the starry sky with the window in the stretch ceiling demonstrates the scheme.

Finished panels

It is nothing more than round discs with a photo printing of space galaxies. They, as a rule, are equipped with 150 - 200 bulbs. The dimensions of such panels range from 120 to 150 cm in diameter. It was not difficult to hindow the design to the ceiling, it would be for what to buy - the cost of the panel exceeds 26,000 rubles.

Stickers

If you have already decided for yourself that you do not afford the ceiling of the starry sky, the cost of phosphate stickers will certainly please you - this is the most budget and pretty beautiful version of the sparkling stars of the ceiling. Figures, during the day you absorb the light and give it at night, made from plastic or paper. To glue them to the ceiling, any special skills from you will not need.

Art painting

Do you draw well? Then what is the case - are armed with acrylic paints and the ceiling! Also, the drawing can be applied by spraying paint from the airbrush. Even if you can not boast artistic talents, there is still an outlet! Choose the picture you like, make a photo printing from it and plunder the ceiling by the film.

Luminescent paints and glowing wallpapers

And paints, and the coating applied to fluorescent wallpapers, quite usually look in the afternoon, the light is emitted only in the dark. What is not the starry sky?

LEDs

If you want to imitate the starry sky using LED lamps, make a certain number of holes in the plasterboard ceiling (as much as you need is idea). One hole is intended for one LED lamp. By changing the direction and adjusting the brightness of the lamp, you can create absolutely different compositions every time. The system of several light bulbs control the controller.

"Strong" parties of LEDs:

• can arbitrarily change color;
• economically consume electricity;
• practically not heated;
• perfectly fit the role of colorwomen for home parties.

A significant drawback of LED lamps is their short-life (about 5 years) compared with tension and suspended structures.

If you still doubt whether you can decorate your dwelling ceiling Starry sky, video may help you make the right choice.

Each of us considers their home a quiet harbor, in which you can relax after a busy working day. Therefore, we are trying to choose such design solutions when it would be construed, which would contribute to a comfortable stay. One of the best ideas for relaxation are glowing stars on the ceiling - the ceiling "Starry Sky". Mysterious flickering of distant planets is perfect for both bedrooms and a bathroom and a nursery. The ceiling "Starry Sky" in the nursery will absolutely provide a great mood to the child.

In order to recreate the starry sky effect on the ceiling there are many ways. They differ from each other visually and, accordingly, the cost of each of them directly depends on the materials used.

So, the shimmering ceiling can be done using:

• stickers;
• finished panels;
• luminescent paint or varnish;
• luminous wallpaper;
• fiberboard;
• swarovski crystals.

Each of these methods is distinguished by the complexity of fulfillment and temporary costs and cost. Also, by using various methods, the ceilings will flicker completely differently. Consider the positive and negative sides of each of the above methods.

Stickers and finished panels

These two methods are simpler and cheap. Ready stickers can be bought at the stationery store. Phosphoric stars can be paper or plastic. Simple phosphoric stars are glued to the surface at your discretion. Thus, you can create any drawing.

A little more complicated, but, nevertheless, also an easy-to-install star ceiling in the form of a finished panel. Such panels producers produce large round discs with photo printing in the center. The diameter of such a panel from 1.2 to 1.5 m. There are several design options on sale. Installing such a "starry sky" on the ceiling is similar to the installation of an ordinary chandelier. The only disadvantage of the finished panel can be called its rather high cost.

Plastic stars to create constellations on the ceiling

Draw paint

Another simple and inexpensive way to turn the ceilings to the "Starry Sky" is considered to apply a drawing with luminous paints or varnish. The advantage of this method is that it does not require the installation of special ceiling structures. Thus, it protrudes one of the optimal options for apartments with low ceilings.

Such an execution technique requires a responsible approach. Before creating a "starry sky" on the ceiling with your own hands, the surface must be perfectly aligned with a putty or plaster. Given the fact that the day of the ceiling in the form of a starry sky will be unremarkable, white, you can apply one trick. In any graphic editor performs a drawing for the sky.

Depending on the taste of the owner, it may be a pure sky, sky with stars and even the heavenly arch, made in 3D format. In a specialized company, the image will be transferred to the film, it is desirable not to save and choose a film used in external advertising.

Its main advantages are considered:

• strength;
• excellent color gamut transmission;
• easy sticking to the surface.

Creating the sky on the ceiling with paint

Do not forget to take into account the fact that the maximum width of the film is only two meters. As a result, the image should be divided into several parts and then stick to the ceiling as accurate as possible, so that the joints of the joints are not visible.

Experienced masters can recommend to pre-print a small image fragment. This is explained by the fact that the finished palette may not fit your expectations on the monitor screen. Perhaps it will be necessary to slightly adjust the color gamut.

When everything is ready, you can proceed to pasting, which is performed elementary. On its back side, a protective tape is placed, which is pre-filmed before pasting. To prevent the appearance of air bubbles under the film, it is necessary to walk with a roller or a soft cloth.

The docking of individual fragments is better to carry out a mustache so that there are no white lumen.

When the pasting is finished, dots or blots, imitating stars are drawn with luminescent paints or varnishes, it is these painted places that will make the ceiling by children's mysterious starry sky. They can be drawn chaotically or imitate whole constellations and galaxies according to the scheme. After performing all the work, you will get the sky, on which the first stars perform with the onset of darkness.

Glowing luminous wallpaper

Also one of the common ways, how to make the ceiling "Starry Sky" with your own hands, stacking of luminous wallpaper. They are presented in a large assortment in specialized stores. Selecting the most suitable option, stick on the ceiling wallpaper and enjoy the result!

Glowing wallpapers on walls and ceiling

Using LEDs

The ceiling with a starry sky, the basis for which the LEDs or fiber serves is somewhat more expensive. In addition, it is difficult to make it enough to do it, so specialists are most often attracted for such work. In suspended or stretch ceilings, the masters are made by multiple holes through which the LED light bulbs or fiber opens, imitating the ceiling with the stars at night.

In the case of the use of LED light bulbs, they should be connected to the control, with which it will be possible to change the brightness and direction of lighting. And when using a multi-colored composition, the controller changes and the color of the entire panorama - the stars shine on the ceiling as you like most.

The obvious advantages of this method are:

• small electricity consumption;
• the possibility of mounting a multi-colored design;
• durability;
• the ceiling material is completely not heated.

LEDs for the creation of "Star Sky"

For those who like to arrange parties in their home, a certain plus will be the opportunity to use a wonderful light music.

Fiber optic to help

Especially bright and colorfully stars are shine on the ceiling, equipped with fiberglass. To make such a ceiling in a nursery or bedroom, you will need:

• stretch ceiling;
• light generator;
• fiber fiber threads.

A halogen or LED lamp is installed in the light generator. You can additionally install the light filters by which the ability to change the color of the stars and their brightness will appear. Some models allow you to create a motion or flight effect. Small dimensions of the light generator allow it to hide it in a closet or special shelter from plasterboard.

The next step is to connect to the device for flexible fiber defined diameter.
Before mounting the stretch ceiling at the level above, it is necessary to equip one more frame from sheet material or fishing network. This is necessary in order for heavy fiber fiber threads to be pressed on the construction of the stretch ceiling.

On the frame distributing the lighting threads, laying out the stellar pattern on the surface. After that, the stretch ceiling is mounted, the tissue is warming up, and the holes are done in it. Approximate their density 80 pcs. per 1 sq.m.

In the hole stretches fiber. It is fixed with glue, unnecessary ends are trimmed with nipples.

Illumination of Swarovski crystals

The projection of the starry sky on the ceiling with the help of Swarovski crystals looks unusually spectacular. Crystals are attached to the ends of fiber fiber threads and create a unique, scattering light of shimmering stars. The crystals on the ceiling "Starry Sky" in the nursery look unusually beautifully. This is primarily due to the fact that the crystals on the ceiling surface are visible in the afternoon, they are very beautifully reflected in the sun's rays, playing in all sides with multi-colored glare.