The table for camping foldable do it yourself. We save the place and create comfort by making a round sliding table with your own hands on a detailed drawing. Important moments when choosing hiking tables

Folding table with your own hands - an indispensable piece of furniture for those who love to relax in nature. The presence of such an object of furniture allows you to spend a picnic with comfort, placing food and drinks are not on the litter, but on a comfortable table. The sweat of this homemade folding table from the tree will not take much space in the car, and at home it can be hidden into the case from the rug for yoga and hang on the wall.

We make a table-roll

To make a wooden folding table with your own hands, you need to purchase pads with a round cross section for the manufacture of legs, as well as planks like parquet for future table tops. In addition, you will need bolts for connecting design details. Before starting work, it is recommended to draw the drawings of the future product with the size of all elements.

The thickness of the legs should depend on the degree of load, which will have to withstand the finished table. The height of the legs is determined by user preferences. In most cases, it is 70-75 cm. Billets need to be cut into so as to get the pads of the desired length. Then the blanks for the tabletop are cut. All sections of cuts should be treated with coarse sandpaper, as sections formed by saw, differ in irregularity and can injure man.

At the next stage, you must make the worktop yourself in accordance with the prepared drawings. Most masters prefer to make it square or rectangular, although on this technology can also be made a round or oval countertop.

It will take a nylon tape for operation (similar to those used for the manufacture of pens of sports bags and school ranks). From the tape should be cut off two fragments, equal to the length of the future table top, and then the edges of these fragments should be treated with fire.

Boards Countertops should be located at the same distance from each other (this is relevant for both rectangular and round items). To achieve the desired result, you can use two small planks that need to be laid between the connecting boards. Homemade boards are put on the underside up and nylon ribbons are attached to them with a bracket and hammer.

On the edges of the design, in accordance with the drawing, two removable wooden planks are placed with pre-drilled holes for the bolts to which removable legs will be attached. Thanks to these dors, the table top will turn out to be durable and will hold the form.

At the next stage, inside the wooden legs need a drill to make holes, and then set the thread for bolts.

Now the design is ready.

In the assembled form, such a homemade table looks like an ordinary stationary, and in the disassembled it is easily wounded into the roll, the legs and side powder are inserted into the roll. Now it can be put in the rug and hang on the wall.

Collapsible table from old toaster

Very easy and fast, without special drawings, you can make a square or round collapsible table from the old stuff and any material that is suitable for the manufacture of the table top. Such a product can be stored on the wall in the garage or utility room.

To work, you will need an old Soviet stool with unscrewing legs.

From the stool you will need only a silhuman frame, which should be unscrewed from and divided into 4 equal fragments using a metal hacksaw.

After that, it is necessary to make a tabletop of an arbitrary shape (square, rectangular, round). For these purposes, any healthy material is suitable - chipboard, plywood, a piece of plastic windowsill. The size of the countertops can be arbitrary, but before assembling the product it is recommended to prepare its drawing, it will help to avoid errors when performing measurements.

It is possible for example, take two pieces of plywood with a thickness of 1 cm, glue them with each other with PVA glue, and then bother with self-draws. After that, the corners of the product must be rounded with a jigsaw so that sharp corners of the countertops did not become a source of injury. The round table should also handle the edge so that it is smooth and safe enough. The finished tabletop must be covered with a veil and two layers of varnish, and then leave for complete drying. At this time, it can, for example, hang on the wall, attaching a special looping to it.

When the countertop is completely dry, it is necessary to attach 4 parts of the sawn stool frame to its corners. The indents from the edges are calculated in such a way that the protruded legs do not protrude beyond the edges of the table top. Wood legs can be made of a bar with a round cross section or a tap polypropylene tube. You can also take ready-made legs from the old table or tube TV.

To work, the M10 threaded stud will also be needed, which should be divided into 4 fragments of 8-10 cm. Then it is necessary to wind up the heel to the heel so that the hairpin turns tightly into the propylene tube or the hole drilled in a bar for future threads. If necessary (to increase the volume) on top of the heel, you can wear a piece of garden hose. This design should fit the legs tightly into the hole. It must be placed strictly in the center.

The stud should perform from a pipe of about 1.5 cm - this is the honor that will be screwed into the Silmic Frame.

Then the space between the stud and the pipe wall should be pouring epoxy resin, and leave one day until complete solidification.

The product is ready! Such a table can be easily placed in the trunk of the car or hang on the wall.

Any family loves to leave on nature, and for this you need a table and chairs, lightweight and folding designs that are easy to put in the trunk of the car.

Foldable design has its advantages and features.

But, if you know how to keep a tool in your hands, you will not make a folding table for the street with your own hands.

Starting with the selection of the material from which you can make this design.

If you do not have experience with metal and plastic, for which a special big set of tools is needed, you build a construction from wood - It is simple in manufacturing.

A simple picnic table can be made of boards, bars, plywood or chipboard.

Wood mass benefits:

naturalness;
environmental friendliness;
durability with proper processing;
does not cause allergic reactions.

But there are disadvantages:

wood is afraid of dampness;
it may be swarming from sunlight;
it affects the temperature differences;
it can spoil insects.

For this reason, it will be necessary to carry out additional processing from rotting, exposure to moisture and insects so that it does not change its appearance with time.

Metal - excellent, durable material, which has both advantages and disadvantages.

From the advantages can be called: environmental friendliness, long service life, aesthetic appearance.

Disadvantages:

need a special set of tools;
if you choose a thick metal, the design is sufficiently heavy;
from moisture, the metal may be subject to corrosion;
requires certain skill and additional processing.

FROM plastic It is much more difficult to work, but it does not have such flaws like metal, and wood, and it does not require additional processing.

Council. In addition, the table can be combined, for example, a tabletop of wood, and metal legs.

What material to choose to solve you, we will look at the manufacture of a folding table for a picnic from a tree. For him you need to cook:

wooden glued shield or paneur;
bars for legs;
washers reinforced;
corners for furniture;
furniture hinges;
nuts;
rivets;
black screws.

Dimensions and drawings

The table can be done in any configurations, it can be:

square;
rectangular;
round;
oval.

Table can be done on the frame that is easy to developand, if necessary, drives to the right position.

Important. The main role in this design is the legs. The competent calculation of thickness and length, the correct formulation of fasteners will provide ease of folding into a compact position and good stability of the table.

Create drawing You can independently, based on your needs, given the number of people who will sit at the same time at the table.

But you can go on a simpler way to find a suitable drawing on the Internet.

Important. Folding part (legs), you need to make shorter the height of the structure, otherwise it will be impossible to fold the table.

Instruments

To quickly assemble the table, the following tools should be prepared:

hacksaw or electrolybiz;
screwdriver or screwdriver;
emery skar;
roulette and marker.

Council. If you use the power tool, then it will work much easier and faster.

How to make a folding tourist table?

For the assembly of a wooden, folding table for a picnic, we present the following instructions:

Finish treatment

In order for the wooden surface to serve for a long time, it needs to be well handled. Algorithm Action Next:

Council. If there is no varnish and moroli, you can soak the oil and paint with paint on the wood of any shade.

Photo

Picnic tables can be the most different. For example, like these photos

Useful video

Another option of the folding table for picnic can be seen on the following video:

Conclusion

As you can see to make a homemade folding picnic table, it is not difficult if you act according to the instructions. It is only important to comply with safety techniques when working with power tools and carefully customized parts.

In contact with

Wooden folding table with your own hands, drawings, diagrams, detailed description of the product, whose feature, is a side of the table top, where the legs are hidden in the assembled form.

Let's look at the design of the table in the context, where the assembly units of the product are depicted:

1. Table lid (table top).
2. Frame (carrier frame).
3. Legs.

Table of table. And its main overall dimensions are shown in the figure.

Table cover

The countertop is made of glued wooden skulls interconnected on the rail. On the perimeter of the lid is fixed by "P" a shaped aluminum furniture profile in size 2 x 20 x 20 (mm).

Reference:
When connecting wooden parts of the furniture shield on the rail, you should follow the following dimensions:

BUT - Wood width of a wooden furniture shield
S. - Wooden furniture plank thickness thickness
SO. - Shield thickness after machining
Sp. - Pasting for mechanical processing
Sh - Edge thickness
SI - The thickness of the groove and rail
L. - Width Reiki
LI - Groove depth

A \u003d 12 ... 150 (mm)
SO \u003d S - 2 SP \u003d A ... ⅓ a \u003d 12 ... 60 (mm)
SP \u003d 2 ... 3 (mm)
Sh \u003d si \u003d ⅓ so
L \u003d SO.
Li \u003d ½ L + 1..2mm

Carrier frame

Comprises:

1. Cross Tsarga.
2. Longitudinal Tsarga.
3. Confirmate 7 x 50 (mm).

The inner surface of the transverse king, along the entire length, is plane at an angle of 10 °. From the inside of the longitudinal king, two recesses for the fastening of metal corners are molded. Longitudinal and transverse tsargi connect with each other with Evrovintage (confirm).

Legs

Consist of:

1. Leg.
2. Crossbars.

The crossbars are made of wooden cuttings Ø 16 (mm), which are inserted with a small tension in the holes of the legs, pre-on the surface touch of parts, is applied fine layer of glue.

Wooden folding table with their own hands or the order of assembly according to the drawings:

1. Prepare the necessary material.
2. Let's make assembly details.
3. We collect assembly units.
4. We produce finishing processing of assembly units and apply a decorative paintwork.
5. Tree screw screws 3.5 x 16 (mm), we will attach a four metal corner of 26 x26 x30 (mm) to the bearing frame.
6. The legs will be attached to the carrier frame, with a small tension bolts furniture with a semicircular head and a square headrest 10 x 50 ... 60 (mm) according to the "Bolt - Washer" scheme.

The figure shows the design of the carrier frame with legs folded.

The figure shows the design of the carrier frame with legs in the unfolded form.

7. To metal corners, screw screws with a hidden head of 3.5 x 12 (mm), we screw the worktop.

Wooden folding table assembled. Yes, and also, in this design, you can envisage the legs of the legs. Send us your considerations, all ideas will be published on the pages of our site with copyright.

How to seek bracks for pod.
Stalls, or stones with brazed nodels
It is used in the options. Above
Came of Especially this ecoon
META. It is easy to see for a robby, in Vide
The "books" or with stacking beds.

Extre "Book" in the one's vision remains in the room,
the table with folding legs is usually removed into the storage room.

Therefore, the appearance and design of such tables may noticeably
differ.

You may have a question why the table has such a strange form in the photo
countertops? The fact is that this table has a rather narrow specialization.
It serves as an additional insert between two round tables, see
article Round table on one leg.

When all three tables shifted together
the surface of the table top is 950 mm width. and almost 3000 mm long. .

In the manufacture of folding legs, the tabletop shape does not play a special role,
therefore, it is also possible to make legs and for the usual table.
with a rectangular countertop.

The total length of the table top is 2000 mm. , width 950 mm. . If exclude sharp
"Tails" The length of the table will be 1050 mm.

Wooden folding table with your hands drawings

Table height 760 mm.
Of course, you can make a worktop of any size you need.

When calculating legs need to look two positions, it is the total height of the table
and swelling countertops. Here the table is wide, so the sinks are made at 100 mm. .
And yet, the distance between the legs cannot be less than the length of the legs, otherwise
the legs simply will not be in place.

How to make a small table with folding legs, look
article Coffee table.

Table legs.

The legs are made in the form of frames collected on spikes, material of birch.
Frames from bars 60 mm wide. and 30 mm thick. . It turns out
classic assembly, top horizontal jumper - Tsarga,
lower - pod.

For fastening legs, I set two transverse table top
bar.

Bruck width should not be less than the width of the legs, i.e. 30 mm. .
The thickness of the bars of one 20 mm. other than 50 mm. . Delta of thickness of 30 mm.
we need so that the legs in the folded state do not interfere with each other.

For this table, one paired leg turned out to be a width of 750 mm.

and 720 mm high. .
Another feet of 750 mm wide. and 690 mm high. . This is based on thickness
countertops 20 mm. , I remind the overall height of the table is 760 mm. .

The legs to the transverse bars are fixed on the piano loops. The loop is necessary
drown so that the legs in the unfolded state of the whole edge rested
in the edges of the bars. If the legs are hanging on the loop, the table will turn out
very unstable.

In order for the table to be stable legs need to be deducted.

Here is shown
the easiest option. Birch board 100 mm wide. with stamped by
the thickness of pride and depth washed 50 mm. . On the prodes are also made
powered in the middle of the upper edge of a depth of 10 mm. .

The table assembled in this way is hard with transverse loads,
but with longitudinal slightly walks through the flexibility of the legs.

For little
the table of one transverse pride can be enough for a large
table fastening is better to strengthen.

In fact, this table when installing is clamped from the ends of two
sufficiently massive round tables, and therefore it's just to walk
nowhere. Actually, I wanted to make a more complex and rigid design.

Folding can be not only tables and chairs, see how to make
floral shelves from the stepladder.

In another embodiment, the transverse frame is glued. This frame is also
installed on the loop from the bottom of the table top and when placing the table
falls between the legs. In this case, the thickness of the transverse bars to which
fasten legs, it is necessary to increase with the calculation to the central frame
she laid under the frame of the legs. At the same time, the prodes must be installed
clamps.

The easiest lock is a self-tapping screw or confirm
twisted outside, through the pod to the end of the central frame.

Another option, instead of one big longitudinal central frame
two drop-down tsargi, here too need to think about the fixing of the Tsarga
to the legs.

Instead of all this, you can install two hips, from the bottom from the middle
countertops Again to Plogs, Ukos are also attached
to the tabletop on the loop.

Commenting and posting links is prohibited.

Table step chipboard, table on kitchen from chipboard, photo of inexpensive table, table folding from chipboard, photo folding table in the kitchen, table price for kitchen

Best photo selection: folding table for kitchen

It is necessary to clarify what sizes of the folding round table for the kitchen will have, if you push it, as it may turn out that in a small kitchen

Of course, the buyer himself decides, from what material it is better to have a table in the kitchen, but it is important to take into account the strength of the design and durability.

oak, I will buy a table from an array for kitchen, kitchen table catalog, tables for living room, oak tables, folding tables, buy folding table, tables

Care table 1.2, photo folding table, folding table, flattening table, post-standing table, table in the kitchen

Cant-2 Wenge table, buy oak table, buy a table in the kitchen, photo and price of the table, folding tables, table folding from dubby, folding table for kitchen, table

Table Cheremosh-1 apple tree, wooden table, wooden table, buy a table from an array, tables from an array, table manufacturers from an array, table not folding, table

An interesting decision was offered designers of the Furniture Manufacturer CANCIO Having created a folding kitchen table Pilot.

Compact design assembled

Universal color for folding dining wooden table oval shape is a democratic white. In any color kitchen interior palette,

Table Scyth Rambler, photo folding table, folding table, folding table price, post-standing table, table in the kitchen

Fashion on artificially aged things have long attracted all lovers of beautiful and bright things, and this table is one of the most vivid representatives

Table dining Charlin.

How to make a folding table with your own hands?

Buy table dining, buy table in the kitchen, buy a table in the dining room, buy a wooden table. Online store furniture boom

The round bar table is bought, as a rule, for cafes, bars, restaurants cafe. Standard execution of such tables of frames from

Glass table TB008-5 Champagne Kiev, buy kitchen glass table TB008-5 Kitchen champagne, dining folding table ML 308-5 champagne,

Wooden oval dining table sliding on metal legs in the middle of the kitchen of which is made in gray

Ruta-2 table (ivory), table folding, folding table, table wooden, wooden table, one hundred oak, oak table, table in living room, table on the kitchen, tables from

Type: dining (folding) Material Table topics: MDF Case material: Tree.

Support material: Tree. Color supports: bleached oak. Edge Material: MDF

How to make chipboard with chipboard with their own hands

We had it at the beginning "small" factory computer table that was adopted in Prague.

But over time we realize that this table in our small room takes too much space (more than a meter from the wall). I had to cut him into pieces and make a night table for him.

And at this point, for collecting here, there is such a simple small folding table that you can fold on request, freeing the space in the room. I do not pay attention to the bad calendars, I covered them (during the photo session) with a hole in the wall, on which there was a permanent monitor of the CRT.

This is actually the size of our counters only for clarity, and these sizes and forms are not categorically respected.

The leaf was bought in Obi, I do not know, but, in my opinion, it was originally 90x60 cm. And after the blade spots the edge and cut a small niche behind the back of the chairs, the size of the table was 90x56 cm.

Then, with sandpaper, wrap the wand, the processed ends of this sheet. After that, the red back is painted, with the exception of the back side, as it will be attached to it.

The table was attached to the wall with a chopstick of 45 × 45 mm, because the wall is very soft (chalk) and not quite smooth.

On the wall there are four screws with self-locking screw about 8-10 cm long. Screws are screwed into the base so that self-tapping screws do not stick. After the iron is tightened to the wall, the steaks are glued with glue gluing. Before you have an electric monitor, this column served as a small window frame, which was parked in a vertical position, in the special pockets of the heater, mice and keyboard.

The hinge suspension was attached to the meter, and then on the stick on the wall.

The counter-edge of the meter is supported by two pieces of such chains at the edges.

The length of these segments is chosen by hooks on the wall and corners on the table. This means that the table is built strictly horizontally (plane), and then we measure the length of the chains.

Some such hooks with a thickness of 3.5 mm were wrapped in the wall through the foot.

Why the hooks did not impress me with their appearance to secure the chain on the table, I decided to use the usual railway corner located under the table.

The first was drilled by a 2-3-meter drill with a series of holes in the table, then with the same drill, diagonally selected jumper between the holes. Upon returning the opening with a naked file was slightly trimmed. Thus, we received two longitudinal openings for corners in DSP. Before fixing the corners under the table, the turnips rounded the file (one that is always in front) in the corners.

Then disconnect one link from the chain and place it at the angle.

Massage does not concern the back of the head (if you are sitting back to it).

From tin here is curved, no twisted roll. For which the rack is kept vertically and at the same time at some distance from the wall, which is parallel to the wall. It works perfectly and quite reliable.

After buying this LCD screen (by the way, there is a photo with an old monitor in a diaphragm), the table stopped to fold, because the new monitor was giant and did not hang in the wall.

Thus, this new Benk always settled on this table. They also had to cut a small wall so that the monitor wall moves a little longer than it was installed.

If you decide to draw the same or similar folding table, think about the intended download in advance.

For example, if you want to jump or sit on it, then the chain is better to take immediately, so it is desirable that the links on it are sealed.

Transformer table do it yourself

The same applies to the rest of the structure, hooks, corners, hinges and a table that can be cut thicker and stronger.

In general, the table is very attractive, he does not bother his legs, because he has no legs.

If the so-called window threshold (bar) runs a little more, you can switch it and before this LCD screen. Also at the bottom of the table (bottom) you can stick or tie an image or poster, it is desirable to repeat the circuits of the table (so to speak, for harmony). After raising the table, you do not need to admire the clean and boring chipboard plane. Thus, like the button, it is possible that two birds with one stone, in a composite state, the image is displayed, and in the disassembled form of the grass of the table is straight for its direct target.

Other sites sites

When copying materials from a website you need an active link to the website www.mihaniko.ru.

Make a campaign table with your own hands - and Ida in nature

When someone begins to talk about the "approach" of the tourist or fishing season - it causes it only a smile.

Avoid tourists and fishermen do not recognize any seasons - any weather is good. The main desire. Sit with a fishing rod at least over the hole in the ice, even on the green shore of the lake, decompose a snack and a little hot - not on Earth, understandable, and not on ice. The table is needed by sure, and the compact and lightweight. And it is best to make a similar campaign table with your own hands.

We offer to make such a campaign table

They are sold in a variety, but we need:

Suitable in size, not standard.
Inexpensive.
Multi-purpose.

The optimal size in the unfolded form was introduced to us: the length is 1000 mm, the width is 580 mm and the height is 530 mm.

In folded form, it looks like a suitcase with dimensions, respectively: 580x500x80 mm. In the drawings, the draft, raw option is visible, and how to do it - we will now understand.

Matching table in folded form

List of essential materials

There is everything extremely simple, because we make a table marching, not a parade.

Therefore, we take the phaneer of 10 millimeter thickness and the birch bar with a cross section of 30x30 mm. From plywood we cut two table tops 500x580 mm, and the bar cut as follows:

500 mm - 8 pieces, table legs and false parts of the frame under the table top.
520 mm - 4 pieces, the inner parts of the frame under the worktop.

Opened table

Since our minimum fittings and fasteners, we will buy them at the same time in order not to go to the store twice:

Self-tapping screws 4x25 mm
Self-tapping screws 4x50 mm.
Loops - butterflies, with a scope of 60x60 mm.
Hooves Furniture printed, not angular, plastic - 4 pieces.
Furniture iron handle.
If there is a handle from the old sac bath, folding, you can use it.
Stages "Suitcase". They are not sold in furniture fittings, but in the department of accessories for leather goods. You can also use locks taken from any serving suitcase or old sewing machine. We took from a compact film projector.
Furniture screws (or bolts, if already in the farm) 8х70 mm - 4 pieces.
Nuts - lamb, respectively, m8 - 4 pieces.

Use of fittings and fasteners

To make a campaign table with your own hands in the draft version - you need the minimum of the tool.

Separate items to allocate it - we will get out of the cabinet as needed.

Chernovaya assembly of a hiking table

We collect the frame, tightening them with a self-drawing of 4x50 mm, one for each angle.

In the outer parts of the frame under them, it is advisable to drill through holes with a dimmeter of 5 millimeters in order not to split the bar. This fastener for the frames is quite enough - the main load will take on a plywood countertop.

We are screwed to the frames of 4x25 mm with the frames of 4x25 mm, and the plane is also drilled - the plane of the drill - a five and a gazon.

Under the screws (bolts) drill in the overhead parts of the hole frame with a diameter of 8 mm, retreasing at the inner corner of 15x15 mm. They must coincide with similar holes in the legs.

Before putting the loops - butterflies, put the legs as you can see in the picture.

They should not get on top of each other with a decomposed countertop - why the extra thickness? The loops also screw 4x25 mm screws, simply folding the table halves. Drilling under the hand - and a table in the draft version is ready, but!

Stuffed legs should not fall on each other

Processing of a hiking table

It is perfect that we all coincided and so wonderfully develops and reveals.

This process is still possible to enjoy only at home, in a dry, well-ventilated room. In such a form, our table will withstand two, maximum three excursions in nature.

After you have to do a new, which is pretty hurt.

Matching table ready, but it should still be processed

Water is present everywhere and friendly with wood, only while the tree clings to the roots behind the earth.

Blowjob, blackening and so on - on a deformed table, even to put a jar for worms for worms. Therefore, we treat it and at the same time slightly strengthened.

Before the ideal smoothness, the details can not be grinding, the main thing is to get rid of potential zoom.

But to miss and proceed with exemplary care - in order to serve for a long time and regularly.

For anti-inflict and antiseptic processing, we recommend "Pinotex" and any of its derivatives.

They are not only fighting wood and plywood, but also tonnow the table in the selected color - options mass.

The ends of all the bars and plywood countertops advise before the final varnish to impregnate with Olife. To do this, heat the olive on the water bath to the maximum fluidity (do not think to do it on an open fire or boil it!), And literally launched it with a rigid brush into all the edges absorbing water.

After that, it's good to dry all the details and proceed to the varnish.

Laco does not need to "pour" the surface - it is also necessary to rub it.

How to make a folding table with your own hands: 2 master class

It is better to cover two or three times. You have already understood how to make a campaign table, it remains to realize that this necessary and convenient item will really go with you in multi-day trips. And no one will offer him vodka with pepper or tea with Malina, when he gets sick - the table must be put in a impermeable "Spa Tander" in advance.

Appropriately decorated and processed, it will last you for many years.

And by the way: not only legs are placed inside it. And the wife does not climb in life to look for a snack in something so much glamorous.

Now for a complete set I decided to make a tourist simple table - clamshell. Such a table in folded looks like a small plywood suitcase. The design design of the table includes the manufacture of tabletops from plywood. This material has sufficient strength, and its proportion is quite acceptable to use as the main material for such a variant of portable furniture. The plywood suitcase is convenient in carrying, in the car's trunk takes a little space.

For its manufacture, prepared tools and purchased the necessary materials.

Tool

So, the furniture assembly scheme is based on materials from plywood and a wooden bar, it took the appropriate tool:

drill;
electrolovik;
screwdriver;
wrench for 6 mm;
chisel;
level;
roulette, square, ruler, pencil.

Materials

Bursed the materials according to the list compiled by me:

plywood sheet 140 x 70 x 1 cm;
bar 800 x 4 x 4 cm - 1 pc.;
plastic handle - 1 pc.;
castles for a suitcase - 2 pcs.;
fastening screw-screw 100 x 6 mm with gripping under the wrench - 4 pcs.;
nut - lamb Ø 6 mm - 4 pcs.;
furniture loops - 2 pcs.;
screws 30 mm - 30 pcs.

Hiking furniture decided to make from two folding tabletops in size 70 x 70 cm each. The height of the legs determined 60 cm so that they are freely placed inside the suitcase. At the same time, such a height of the legs should ensure the comfortable position of the person sitting at the table on the usual stool.

After the preparation for the assembly with their own hands of the homemade hike table was completed, proceeded to step by step execution of the items of this Instruction.

Step-by-step instructions, how to make a tourist table

The sheet of plywood sawed by an electrolybiz into two parts with dimensions of 70 x 70 cm.
Bar sawed on segments for subframe: 70 cm - 4 pcs., 620 - Piece, and for legs 600 mm - 4 pcs.
From segments of a bar 70 cm and 62 cm collected 2 subframe, connecting them with screws in places of conjugation.
From above on the frame put Phaneru.
Plywood sheets with a screwdriver secured with screws around the perimeter of the frames.
The chisel made in the back of the adjoining frame to each other of the recess of 2 mm for furniture loops.
The loop placed in the deepening and secured them with screws.

In the corners, the frames made a drill of 4 through holes Ø 6 mm.
In the upper ends of the legs, 4 screw screws screwed up a spanner.
On the one hand, the frame side has secured a plastic handle with screws.
In places, the tabletops, the bags of suitcase locks attached screws to Ramam.
Screw screws of the legs drove the threaded ends into the angular holes of the frames.
From the outside, the threaded ends of the fastener secured with lamb nuts.
Put the table on the legs and the level checked the horizontal countertop.
Then he removed the legs, put them inside the tabletops of folding furniture.
The countertops folded, closed the locks. The table accepted a march.

In order to make sure of the assembly of furniture for tourism, again it collected and checked all the attachment nodes. That's what happened in the end.

Cost of materials

At the end of the work, the costs of materials were calculated to make folding furniture:

plywood sheet 140 x 70 x 0.9 cm \u003d 150 rubles;
bar 800 x 4 x 4 cm \u003d 8 m x 110 rub. \u003d 880 rubles;
plastic handle - 1 pc. \u003d 15 rubles;
castles for a suitcase - 2 pcs. \u003d 20 rubles;
fastening screw-screw 100 x 8 mm with gripping under the wrench - 4 pcs. \u003d 20 rubles;
nut - lamb Ø 8 mm - 4 pcs. x 2 rub. \u003d 8 rub.;
furniture loops - 2 pcs. - 10 rubles;
screws 30 mm - 30 pcs. in stock.

TOTAL: 1103 rubles.

Labor costs

On the cutting of the plywood sheet and cutting the bar, the electrolybiz spent 1 hour. Table assembly took 2 hours. Total time to manufacture with your own hands the sliding table was spent in the amount of 3 hours. During the work used a respirator and safety glasses.

For those who have little experience in assembling furniture, it will be useful to see the corresponding video, and then start work. Such furniture will be indispensable for a tourist departing for a picnic in nature.

For modern urban apartments, folding furniture is very relevant, because it saves free space and does not lose its functionality. Dining table an integral attribute of any housing. It should be large enough to allow the whole family to be satisfied, as well as take guests. In the case of a dining, as it is impossible, the option of the sliding table will have. In folded form, it can be a small table for everyday use or just a tab.

Of course, the collapsible table can be purchased in furniture stores or order, but this is quite expensive and may cause serious damage to the family budget. Why not make a folding table with your own hands? Despite the fact that its mechanism is not from the lungs, nevertheless the manufacture of such an item under the power of any man. The main thing is the desire and some patience.

Decided to make a kitchen table with your own hands? We advise you to look at the option like a clamshell. Such a dining table will fit perfectly in the interior of the city apartment and will not take much space. Its mechanism, despite the seeming complexity, is very simple. The only thing, indeed, it is worth paying attention to this manufacture of details.

Before making the book a book with your own hands, as in any other case of creating homemade furniture, prepare the drawing.

Homemade folding table consists of the following details:

A - countertop, 700x670 mm (recommended material thickness - 20 mm, it can be MDF,
Chipboard or hollow shields, at your discretion), 2 pcs.;
B - cover, 700x200 mm (the material is the one that was used for tabletops), 1 pc.;
In - leg, 720x200 mm (tabletop material), 2 pcs.;
G - Tsarga, 638x190 mm (tabletop material), 1 pc.;
D - lower shelf, 628x190 (tabletop material), 1 pc.;
E, w - Bars horizontal and vertical, 500x40x25 mm, e - 4 pcs., W - 2 pcs.;
H - moving leg, 720x40x25 mm, 2 pcs.;
And - piano loops, 4 pcs.

Scheme of work:

After the drawing of the book table is prepared and all the necessary details will be filled, do not forget to treat them with melamine film. It will protect the spins from moisture and will protect you from the toxicity of the material.
Start the assembly from the connection of parts from, w and e (moving leg and bars). To do this, it is best to use the connection of deaf straight spikes. This design is supplied with a rubber or metal button.
Connect the parts in, G and D. This is a tabletop, leg, kard and lower shelf.
Fix the lid (parts b and c) to the legs. Here we recommend using round spikes.
Attach a piano loop with a moving foot with a moving leg, then all connect the table with a foot.
Using the drawing, all work work on both sides.
Now you can paint your dining table with varnish.

The table-book size "with a very serious table for banquets" is made. As you can see, it's really not difficult.

Folding Table Transformer

Previous option, of course, is not the only possible mechanism. The kitchen table can be sliding. When a small table by unacceptable manipulations is moved to large sizes.

Sliding table with your own hands the perfect option for mastic hosts

To make a sliding kitchen table with your own hands, the drawings will definitely need. They can be found on the Internet or in magazines (who are used to paper sources). Those we offer will create a table with a tabletop in the assembled form 700x1200 mm, and in the disassembled - 700x1670 mm.

Materials and table tools do it yourself:

LDSP;
corner 50x50 (aluminum) 4 pcs.;
guides 2 pcs.;
legs (metal) 4 pcs., strong enough to withstand a large dining table;
6 locks (hereinafter will be described);
screw (10 mm);
saws 20x4 and 16x3.
thermopystole for gluing the edge, but can also be used iron;
drill;
electrolovik;
mill;
level, roulette and so on.

Operating procedure:

Before making a folding table, prepare the necessary details in accordance with the prepared drawings. Billets should be cut down and edged.

Nuance! The cut, made by the mill, is better than a jigsaw or saw, however, in this case, it is necessary to increase the necessary sizes to a couple of millimeters.

The next step will prepare a mobile mechanism. To begin with the outside of the corner, draw the line dividing its side exactly in half. Such a line will be needed at all corners.
With the help of the guide, mark the place of bonding of the corners and the guide.

Drill the necessary holes.

We fasten the design of two corners and guide bolts.

Place the resulting structures in front of them are movable parts of the guides inside. Now it is necessary to drill 4 holes in the movable parts of the guide from the outside, and in fixed - with the inner.

Tabletop blanks Place on the table the front side from ourselves, thoroughly alleged the edge. The obtained mechanisms are placed on top of the movable part inside and align their centers with a transformer table countertop.

The mechanism is screwed in self-drawing as follows: the movable part to one part of the table top, and still - to the other.

Screw the locks, connecting the edges of the tabletops.

Insert the table tops, place the insert between them and screw the missing parts of the locks to it. It should be possible so that the locks are closed without insertion and with insert.
It remains to fasten the legs and the transformer table with your own hands ready.

Tip! The sharp corners of the metal corners are recommended for safety purposes.

Probably, you will be interested in the question of how to make the table transformer round form. It all depends on the prepared drawings and your wishes. For example, you can make a round sliding table based on the same mechanism as in the previous version.

But there may be other more complex options.

In general, the transformer round table will fit perfectly in the interior of the city apartment, and such a table from the tree will become the perfect addition to the living room of the country house.

Retractable table, option for compact cuisine

How to make a sliding table for the kitchen do not secret. But how to be, if such a table is placed in the kitchen there is no possibility or not necessary. In such cases, you can make a retractable table. It can be completely removed after he fulfilled its role. Thus, you can save a huge space in the kitchen. This option is simply indispensable for small-sized kitchens.

However, the retractable table can be applied not only for meals. This is an excellent version of the auxiliary desktop surface (this option is widely used for computer tables).

Picnic Folding Table

Tables presented to this are full-fledged furniture objects. However, compact tables are needed in the country. Such a table should be convenient in transportation to fit easily in the trunk of a car along with the rest of the picnic accessories. Consider how to make a folding table - a suitcase.

Materials:

plywood 50x60 cm;
bar 30x30 cm 44 cm long (4 pcs.);
bar 30x30 cm 60 cm long (2 pcs.);
bar 30x30 cm long 52 cm (4 pcs.) For legs;
self-tapping screws, nails and furniture screws;
handle (you can use a handle from an old suitcase or purchase a similar), as well
suitcase latches (2 pcs.);
loops 60 mm (2 pcs.).

Operating procedure:

Collect 2 frames from plywood sheets and bars. All details secure self-drawing. Frames together connect with loops.
At the same distances, drill holes for fastening the legs. Similar to make both legs. Considering that they will be attached to the screws, the diameter of the holes should be slightly less than the size of the screws.
Attach the handle and latch. Folding table with your own hands will be ready when you screw the legs. To decompose it, you need to unscrew the last.

How do you understand this draft version. It must be made. To start, pollute all the details, and then paint into the desired color and cover with varnish.

A complicated option is possible. When the feet of the tables are attached on the folding structure. In addition, the countertop is made of rail, and its edges are froghed with aluminum corners.

Of course, such a folding table with your own hands make some more difficult, and it will be more weight.

We looked at how to make the table - a book, a pull-out table and a folding table with your own hands, options for tables for the kitchen and a picnic. How our advice you will choose to you.

The main thing is to carefully familiarize yourself with the drawings and our instructions.