The hunter must necessarily need a rifle and knife. If there is no different opinion about the use of first questions, then there are different opinions regarding the second. Some believe that the knife is necessary for achieving and cutting a shot animal, as well as to protect against the attack of the beast.

Other this item is used primarily to chop branches, cut bread, open banks with canned food and perform different economic work, and the cutting of the game is already on the occasion. Thus, it turns out that there is no universal blade. Hunting can create any man.

What is a product

Hunting knife is cold weapons with a short blade. Blade and handle are its main elements. To protect the palm of the hunter from damage at the time of applying, the product has a catcher, that is, the limiter. Homemade hunting knives look very stylish. The photos presented below are clearly demonstrated.

In order to make weapons, you need to decide first of all, with the shape of the blade and handle, choose the necessary materials, as well as set a list of tools and equipment that will be required to perform specific operations. The manufacture of hunting knives is not available to everyone.

Features of the creation of Klinka

For this subject, an more important feature is the ability to cut, than to carry stakes. For this purpose, the blade is performed curved and bent up. The bending of the cutting edge should be quite large, which allows one movement to make long cuts. This greatly facilitates the process of cutting production. Hunting knife blade shape is of great importance.

Such a cold weapon has a shank for handles from a single metal blank. The sharp edge of the blade edge is called the blade. This is the cutting part of the knife. The opposite edge is always stupid, it is often referred to as a volat.

Stiffness and Length Knife

To give the clinch rigidity make special grooves in the metal part of the product. Such recesses are called shares. They also reduce the weight of the subject. The widespread belief is that domes are intended for the removal of blood, is deeply erroneous.

The length of the blade is performed from 12 to 15 cm, width - from 2.5 to 3 cm. Hunting knives are better to do in drawings. But some hunters prefer to wear two types of cold weapons. One blade is used for cutting production, and the other - for household needs. Not everyone knows how to make a hunting knife.

Choosing materials for manufacture

Metal for the blade should be durable and not subject to corrosion. Very well established itself instrumental steel made of pendulum pyl pendulums, and it's not so difficult to get it. From carbon steels it is worth noting the brand. It has the necessary hardness, it is well holding sharpening, it has a high corrosion resistance. How to make a hunting knife to serve for a long time, tell me below.

Even the most perfect blade can become ineffective and useless without reliable and comfortable handles. It is it that provides the right possession of such a weapon. There will be a blade knife to move in the right direction or go to the side, the hands will be tired or not - all this depends largely from this detail. The handle of the hunting knife must be properly and conveniently lying in the hand, and here is her beautiful finish - the case is secondary.

Accession of the handle

The handle can simply fit on the shank or attached to it using rivets. The first option looks more attractive. The knife shank is performed as a narrow rod. Part of it can go beyond the limits of the handle. Threads are cut on the protruding part, with the help of the nut, the handle is attached on the shank, pressing it to the limiter. With this method of fastening, the base can be made from a set of separate rings. The closure nut is often called the knob, and it usually gives an attractive appearance. The short shank handle is simply planted and glued.

The rivet item is done otherwise. A knife shank is performed in the form of a handle, that is, it is flat and wide. Holes are drilled in it. The lining on both sides is symmetrically applied to the shank, rivets are trimmed into the holes. Fastening is obtained very durable.

Hand: Material

Material for the manufacture of handles should be durable, comfortable to the touch, do not calm your hand, do not be soaked with blood and do not try to fingers from the cold. The basic requirements are also small weight, ease of processing and accessibility of acquisition. It is probably not advisable to produce exotic materials for hunting knife.

The best raw material for the manufacture of handles is a tree. Billets are made of dense varieties. Very good details are obtained from maple, ash and apple tree. Coniferous trees do not apply. Birch is taking the so-called kapa, that is, the growths on the trunk. In the workpiece there is a hole for the nozzle on the shank. If it is planned that it will go beyond the limits of the handle, then the hole is made through. Its diameter should allow the shank to enter the handle so as not to split it.

Advantage of Beresta

An ideal material for the handle is considered a berson. In order for the product to be softer, the raw materials are heat treatment in hot water for 2 hours. It can be said, it is simply boiled in a large saucepan with water, then thoroughly dried. The finished sheet of barks are cut into small plates of rectangular shape. The size of the details should be slightly more than the sizes of the future handle. Next, the plates on one are put on the knife shank.

Holes in rectangles need to be done immediately before their nozzle, since the cross-dimensions of the shank do not remain constant. Barriest scored is compressed with a nut, which is screwed on the thread at the end of the shank. If necessary, the records are added until all the berson denies a single dense briquette, and under the nut, there will be several thread turns. With the help of a sharp knife and the handling file, the desired form is given. In the final version, the handle is polished with a shallow eye. Lucky and paints are not needed. It is always nice to make a hunting knife with your own hands. The drawings will help to determine the shapes and size.

The limiter does not allow the hand to shift to the blade. It is attached to handle. The limiter is installed only single. The cross is applied in the way, many hunters prefer a special limiter not to install at all, and the hand is protected through the protrusions on the handle. Such knives are more convenient to remap the skin from the animal and ferment it.

Basic Operations for Production of Knives

The manufacturing process includes several stages. Consider how hunting knives are made with their own hands (the photo will allow to estimate the laboriousness of the process).

The knife is ready. It remains only to put it in reliable sheath. Manufacturing hunting knives can be a good business.

The hunter must necessarily need a rifle and knife. If there is no different opinion about the use of first questions, then there are different opinions regarding the second. Some believe that the knife is necessary for achieving and cutting a shot animal, as well as to protect against the attack of the beast.

Other this item is used primarily to chop branches, cut bread, open banks with canned food and perform different economic work, and the cutting of the game is already on the occasion. Thus, it turns out that there is no universal blade. Hunting can create any man.

What is a product

Sketches of self-made knives

Hello, friends!

Today I want to tell about how to make various forms and designs of knives. It is known that a knife, it is not only a cold melee weapon and an indispensable hunting attribute, (I intends that I do not mention the kitchen utensils, as a domestic necessity), but also an integral part of our historical past, its pride and beauty.

In principle, an ordinary sharp piece of iron has no value. If you just sharpen a steel plate, then it will remain a conventional acute steel plate, a soulless tool of the cutting of a lively and inanimate flesh. The value of the present work of art is the soul that the master invested in its product. And this concerns not only cold weapons, but also any other human activity. Each thing made with love and inspiration laid a particle of the soul of the person himself and therefore she herself is a little alive. Ancient masters knew about it well and gave their blessing names, regarding them as a certain living substance.

In our technological time, everything is delivered to the stream: a detail to a detail, a screw to the screw and get the most necessary, but a completely soulless article. However, some irrepressible creative individuals are still engaged in the manufacture of living things. I hope that you also belong to you, readers of this article. Below I posted drawings of knives of various configurationsThrough which you can make your "live weapon". From what material to make weapons on this site already mentioned a lot, in articles, etc., but maybe someone has its own offers.

And so in these drawings there are only common sizes: length, width and height, everything else do your taste, I just want to show what form can be made knife. I know one person who is just obsessed with. He coped in twenty years a huge collection, ranging from coarse and clumsy first crafts and ending with an amazing beauty, I would not beat the word, masterpieces. Moreover, this man as he asked him, did not sell, not a single knife, and to order to do it categorically refused.

Now he is already retired, all the walls of his apartment are hungry benches on which his homemade pets are located. Sometimes he takes what kind of a knife and for a long time he considers, at times something whispering and strokes him. You do not think, he did not go roof, he is a normal cheerful and talkative old man. Just probably he really wrinkled his knives and belongs to them, as a living, but frozen in space and time beings.

Many men like to have a beautiful and at the same time a reliable knife. A special subject for pride is the subject that is made independently. The process of creating such a product with your own hands can take a lot of time and effort, but at the same time fascinates. A person is given unlimited versions of the handle and blades, everything depends on the imagination. Help decided on the choice of knife drawings.

It is important to understand that each knife is adapted for a particular sphere. Butcher, fisherman or hunter, will use completely different tools. Therefore, when choosing a drawing, it is first to determine the purpose of using. It is also necessary to pay attention to the size so that the tool is convenient to use its host. You can borrow some part from the drawing or an entire element. The drawings will help to realize the idea and make you the happy owner of a new knife and cause delight from friends and acquaintances.

Types of knife

On the scope of application they are divided into several categories:

• throwing;
• tourist;
• hunting;
• fishing;

For lovers, throw knives, one will be little, and the purchase of a set can do quite expensive. Therefore, everyone can try to make themselves. We describe several examples that are popular.

Metal knives "Cobra" are made in the city of Zlatoust by the company "gunsoyechnik". Drawings of knives of various models are in public Internet access, but at the moment there is only one officially produced. The fact is that the developers made a choice towards the manufacture of one, but worked and well-balanced knife. The factory product is painted red in order to be easier to find.

Metage knife "GOOD" company Rosarms, the drawings of which are also easy to find, is carried out from the company Zlatoust Steel. The original find in design is the use of ordinary lace as the handle. From the same manufacturer there is another knife for throwing "blow". Increased size and weight allow it to throw it for longer distances.

Requirements for knives for tourism, fishing and hunting recommended the use of stainless steel, find a sketch is not difficult. Handles to perform aside, as the overhead elements during operation can split from loads. A tourist knife may include several blades and tools that can come in handy in the hike. Options for hunting and fishing should be sharp throughout the long time so that the person with their help can efficiently separate meat or fish.

How to use drawings

First of all, you need to print a sketch of cardboard or tight paper. The scale of the drawing and the knife must be one to one. If the workpiece will do another person, you should set out all the requirements and specify the dimensions in the drawing. Cut the stencil and lean to the metal sheet, cover it with kerner or marker. Cut the blank with a margin of 1-2 mm and then remove excess with a file or another tool.

The handle is most often made of wood that blends little and has sufficient strength. Suitable for this:

• birch;
• nut;
• iron tree;
• heather and others.

If the handle is overhead, then the rivets of a small diameter will be required. It is possible to make them from the brass rod.

From the tools you will need:

• drills and Zenker;
• sandpaper for coarse processing and zero;
• electric drill;
• vice;
• files;
• a hammer.

The technological process of manufacturing a hunting knife with their own hands consists of several stages.

1. It is necessary to transfer the drawing with all sizes on the metal plate.
2. Cut the blank on the contour, run away too much and drill holes for rivets.
3. Make the cutting edge of the blade. Secure the future knife in the vice and a file, at a certain angle, run the metal. Repeat the process on the reverse side, if required. After processing with files, complete the process with emery paper.
4. Turn the blade into the furnace or on the fire within 15 minutes. To do this, place the metal blank in the immediate vicinity of the coal or other heat source. As soon as the metal becomes red, you must pull out a blank for a few seconds. Checking the heating should be using a conventional magnet. The heated metal ceases to reach the magnet. In this case, heating must be stopped.
5. Lower the hot blank to the oil down the cutting part. Immersion is not completely completely, but only on 2/3. To keep in this position is about a minute, and then slowly immerse in the oil completely.
6. Make a vacation in the oven at a temperature of 400 ° C for 45 minutes.
7. Perform a finishing processing with emery paper or other means.
8. Make a handle from wood on a sketch, drill holes for rivets.
9. Imprease the handle with special solutions to increase the service life.
10. Build all parts.
11. Polish handle.

On this manufacturing process, and we have a beautiful and reliable homemade knife.

Be able to manage or just buy for your money. But what if you do not want to spend your money? That's right, you can print your knife with the help of drawings.
Naturally, this knife will not be in the game, but at least somehow you can rejoice.

Drawings of knife

If you want to print a knife, and then it will qualitatively draw or make a knife from corrugated cardboard - then for this we attached screenshots, and with their help you can first print knives, and then do what you want. I will say right away that make a real copy of the knife is not so easy, so tune yourself to the fact that you are good. Having made a knife, throw in the comments links to photos and the best I will publish in the article.

Knife butterfly drawing

This knife will make the most difficult. Therefore, I advise you to first make some simple knife, for example - a hunting knife. The butterfly will do the most difficult, because you will need to come up with something in order for it to spin. And it will not be so easy to do it.

The screenshot is made of real size, so that you do not seek unnecessary sizes. Printing the knife, you yourself will be able to measure what you need.

Hunting knife kc

The drawing of the hunting knife is simpler, so it will be easier to do. However, with the handle will have to go a little and ideally make it out of wood.

Bayon knife kc go

It is also not very difficult to do it, so in a couple of hours you can make the beauty that you can admire the days.

Knife Cerambitus drawing

By the way, this knife is very easy to do, although it might and seem otherwise. For 2-3 hours of work, you can make it and paint in the right color.

Bayonet knife m9 drawing

It is as easy to do, like a cembiton.

The real dimensions of the drawings I could not accommodate because of the big weight. Therefore, I poured all the drawings on the Yandex drive from which you download pictures in a few minutes.

If you really make some kind of knife according to these drawings, then throw off the links be sure to comments.

Knife with a blade hook

The drawing of this knife is shown below.

Tiley knives

This drawing can also be printed and perform it from plywood.

Fake

The drawing for fakes by the way is also quite complicated.
Photos of small size so that you can comfortably watch them from a mobile phone. To see and print the real dimensions of the drawings you need to download the archive from the Yandex disk.

Production of kitchen knife

Remembering many of all cold, piercing - cutting, unexpectedly noticed that there is no sensible in the kitchen Kitchen knife. Well, then, then proceed to its manufacture. Initially, we will define the workpiece: you can take steel 65g or 95x18. Other options do not consider, due to their smaller quality and low prevalence. If there are problems with the workpieces and subsequent quenching, you can simplify the process using a fragment of a saw blade for a knife, or another metal-cutting tool.On the emery circle, give the iron the desired form. Pre-pump the contour of the knife on the template. I use for this carved patterns from fiberglass.

Deleting excess metal, bring the shine with a circle with sandpaper.

Drilling two - three holes with a diameter of 3 mm for fastening, we get this:

Now it's time to take up the handle. Someone uses plastic for these purposes, who Caprolon, who plexiglas who are metal. But the best results are obtained from a simple tree - and firmly, and faintly, and nice to keep. Wooden leg is taken for the workpiece from the chair.Cuts in half in half,

These two halves will be a knife handle. Mounting make on the rice of aluminum wire.

Tightly applying them to the gland, drill the mounting holes and plan on the screws M3 for subsequent processing.

To give the pre-shape of the handle, use the abrasive sharpening circle.

Already something similar to the knife. Now you can replace the screws with rims.Finally, we give the shape of the handle with a rashpyl and polish the strip of the sandpaper, first coarse-grained, and then smaller.