VEGA gas flow water heaters are designed to heat the economic water at home and in enterprises. In water heaters of this type, the installed water temperature is automatically maintained at a given level, regardless of the amount of water of the selected water.

Prices for columns Gas Mora Top Vega 10, 13, 16

Benefits

• minimum dimensions
• uncomplicated service
• automatic work
• gas savings up to 10%
• high efficiency - up to 92%
• the most economical method of heating DHW
• smooth power regulation
• maintaining the water temperature set

Dimensions

• one of the most compact water heaters in the market
• heater height - 592 mm (VEGA 10); 659 mm (VEGA 13, VEGA 16)
• heater width - 320 mm (VEGA 10); 400 mm (VEGA 13, VEGA 16)
• heater depth - 261 mm (VEGA 10, VEGA 13, VEGA 16)
• the minimum diameter of the smoke channel - 110 mm

Comfort

• VEGA flow water heater is equipped with a combined reinforcement from the German company MERTIK, which allows the inclusion of the column already under 2.5 l / min.
• MERTIK fittings is also equipped with a function of automatic maintenance of the set temperature, which is very important when water pressure drops in the water supply.

Economy

• In the discharge of VEGA gas columns, the highest efficiency in the world is highlighted, and almost 92%.
• Thanks to a small, but highly efficient heat exchanger begins to heat the flowing water by 15% faster than any other column.

Reliability

• Unlike all other manufacturers who use similar armature designs, the combined MERTIK fittings used in our columns - another design solution, due to which the moving parts do not work in a water medium, which is prevented by the common problem of all columns, namely the water flow in a loose The place of attachment of water and gas valves, requiring as a result of the change of a whole node.
• Heat exchanger tubes inside are equipped with special turbules preventing precipitation on the inner walls of the heat exchanger and providing quick water heating.
• The heat exchanger is made of tubes with a diameter of 18 mm, which not only significantly prevents salt precipitation, but also effectively cools the walls of the heat exchanger without overheating the casing of the column.

Safety

• water temperature limiter, preventing water overheating in the heat exchanger
• fuse in the reverse thrust of combustion products, preventing the penetration of gases into the room in case of clogging of the chimney
• flame fuse provides good and flexible burner
• the column will not allow the launch of the main burner in the absence of water

Execution

• piezoelectric ignition
• removal of combustion products into the chimney with the minimum diameter of the gas neck
• natural gas

Accessories

• connecting set of steel flexible hoses, incl. nuts 1/2 "and seals (not a composite column delivery)
• crimple for serving the diameters of the chimney and the gas neck ROS-110/120 and ROS-110/120 mm (not included)

Mora Top gas columns are collected in the Czech Republic completely from European components, comply with the best European samples on environmental standards. Gas flowing water heaters Mora Topthey are distinguished by very high reliability and durability, superior to European counterparts. Water heaters have several degrees of protection - from insufficient thrust, lack of gas, the oscillation columns - from the overheating of the heat exchanger. Only in the water heaters with the constantly burning stall of the Czech company is installed thermorel to overheat the heat exchanger. The device will not work in the absence of water in the column. Available water heaters with a capacity of 10, 13, 16 liters per minute with a piezo (constantly burning stall) and electronic ignition. Gas columns Mora.have a rather high efficiency - 92.5%. The main, gas-water node is made in Germany, a well-known supplier of components for gas equipment MERTIK MAXITROL.

Discounts and promotions

Our company provides a 100% discount on the delivery of Mora gas water heaters within the Moscow Ring Road with a comprehensive delivery order and installation at the same time. After installation by the specialist of our company, we undertake commitments to carry out warranty repairs for 2 years in accordance with the manufacturer's conditions prescribed in the warranty card for Mora's equipment. With a bore 100% payment of the ordered gas column Mora of any modifmission is provided with a 5% discount, the price is fixed on the day of payment. After payment is a contract for the free supply of equipment within one week within the Moscow Ring Road.

Technical characteristics of gas water heaters (gas columns)

Name	power, kWt	Production at 25c, l / min	Gabarites, mm.	Type of ignition	Weight, kg	Price, rub.)
	17,3		592x320x245.	piezo		20200
	17,3		592x320x245.	electron. Batteries		22800
	22,6		659x400x245	piezo		22000
	22,6		659x400x245	electron. Batteries			659x400x245	electron. Batteries		26000

After installing the gas column Mora, our company draws out all the necessary documents that can be provided with the auditory organization. And also, as a service authorized center of Mora, we carry out free repairs on the manufacturer's terms.

For the supply of hot water and the heating of a private house, the most popular equipment is a gas column. It is available to almost everyone and does not require much costs. But it is necessary to choose high-quality equipment. After all, the comfortable atmosphere in the house and security depends on it. In this article, consider all the advantages and disadvantages, as well as the peculiarities of the Mora gas column.

Gas column device

Mora gas column is a flow water heater. It consists of the following elements: Gas burner, water-gas fittings, an outstanding device and heat exchanger. In a small and aesthetic case, all equipment elements are hidden along with safety and regulation equipment.

With the help of a gas burner, a safe burning of gas is ensured, while heating water in the heat exchanger. After the plumbing crane is closed, the gas supply stops, and the burner goes out. Razhigig in the gas column can be two types: electric and piezoelectric. In the first form for ignition sparks use electric batteries. And in the piezoelectric method, after pressing the button, the stall is set up, and the burner is in turn from it.

After opening the water tap and changes in the pressure in the heating system, the ignition is carried out using a gland device.

Advantages and disadvantages

With the help of a gas column, Mora can be heating at home, as well as the supply of hot water. The principle of work is pretty simple: after opening the crane, the burner ignition occurs with the stamp. And she heats the water in the heat exchanger.

Water heats up, passing through the pipes of the heat exchanger, and enters the heating system and hot water supply. If you close the crane, the burner goes out, and the column stops working. Mora gas column multifunctionality provides uninterrupted heating and hot water supply in the house.

The main advantages of the column are its economy and small sizes. Even the advantages of the gas appliance can be attributed:

• No noise while working.
• The heat exchanger will not flow over time. Since it is made of copper.
• High equipment efficiency. Even if the water pressure is from 0.2 atm.
• High efficiency. It reaches 94%.
• The design of the burner is qualitatively thought out, as well as the protection of the stamp from various contaminants.
• Safety system.

The disadvantage is the problem to find details to old models. Although the gas column of Mora is cheaper than their analogues, many marked its high cost.

Features of the gas column Mora

Mora's flow water heaters have unique properties and are in demand in the modern market. In the water heater, you can allocate the following features:

• Thanks to the design of the heat exchanger, heating rate is provided 15% higher than from other manufacturers;
• German high-quality fittings are used, which includes a column with a flow rate of 2.5 l / min;
• If water consumption changes, the temperature is automatically supported;
• The neck of the gas plant has a diameter of more than 115 mm;
• And the diameter of the tubes is 18 mm. Inside the tubes are the turbulators that impede settlement of scale;
• Thanks to the heat exchanger, overheating is not allowed;
• The operation of the burner is controlled by the fuse of the flame;
• It is equipped with a "dry start" fuse. This means that the burner will not be lit without water;
• Thanks to the reverse thrust fuse, harmful substances are indoors. Therefore, the water heater can be installed anywhere.

The cost of gas columns Mora does not exceed the cost of analogues that have lower technical specifications.

Installation

Before installing the gas column, you must select a location where it will be located. The room must necessarily be equipped with high-quality ventilation, and the walls are made of non-combustible materials. Set the column is usually not difficult. Consider a step by step process of installing a gas column Mora:

1. First of all, the equipment is attached to the wall.
2. Next apply regular brackets that are included.
3. It is necessary to pay attention to the strength of the wall.
4. Next, you can produce pipes of hot and cold water pipes.
5. It is recommended to install input nozzles before the locking reinforcement.
6. It is also desirable between the instrument and the wall to arrange a gasket of non-combustible material.
7. Next, the flue of the chimney is performed. The diameter of the pipes should be no less than the diameter of the output hole of the device. Chimney must be made of a material that is not affected by high temperature and combustion products.
8. The last item is the connection of gas. Such work is better to entrust specialists.

What to do if the gas column does not ignite

Consider various solutions if the column has ceased to heal. First of all, it is necessary to check the external damage or leakage. Damaged, maybe power cable or device case. Next, check the pressure of cold water and the presence of thrust in ventilation. If the column is electrical, then you can replace the batteries.

If you do not understand the gas columns, it is better to seek help from specialists.

If all of the above methods did not help, then you need to perform the following steps:

1. It is necessary to clean the membrane and filter from various contaminants. To make it enough to wash items to wash under high water pressure.
2. If you notice any breakdowns on the membrane or deformation, then it must be replaced. Higher service life at silicone membrane.
3. If the gas column begins to burn with cotton, but after that it fades, then you need to clean the walled filter.
4. Next, you should replace the solenoid valve.
5. If the sparks are sparking during ignition, but the column does not light up, then it is necessary to clean the electrode of the ionization sensor.

But do not forget that all procedures can be carried out only after turning off the gas and water. If all actions have done, and the column never started to heal, then in this case it is worth contacting a qualified master.

Water heater Mora can work on liquefied fuel or natural. Violated the work of the column can only with the wear of the details of the device, the absence of traction in ventilation or when using poor-quality tap water. Small faults can be corrected independently.

Wall-mounted Gas Flow Water Heaters Vega Max

Vega. Mach is designed as an ideal replacement for old types of water heaters of Mora 370, 371, 5502 A 5505. The connecting dimensions remain the same - this is significantly saved by the time and cost of replacing the old water heater.The wall gas water heater is designed to heat water in homes and offices with a thermal power of 17.3 kW, with water consumption of 10 liters per minute.

Wall gas flowing water heaters Vega

with electric closure

VEGA flowing water heaters - brand new "star" products of the Czech company Mora-TOP. Vega is one of the three bright stars of the summer-autumn triangle - with its brightness of many times greater than the brightness of the sun. Due to the minimum sizes, modern design and exceptional technical parameters, VEGA water heaters exceed all similar products available on the market.

Wall gas flowing water heaters VEGA E
fromelectronurgist

VEGA E flow water heaters are completely new "star" products of the Czech Mora-Top. Water heaters are designed to heat the economic water at home and in enterprises. Equipped with a battery pattering. 2 batteries K20 1.5 V. used as a source thanks to the minimum sizes, modern design and exceptional technical parameters VEGA water heaters exceed all similar products available on the market.

Wall gas flowing water heaters Vega

VEGA flowing water heaters - brand new "star" products of the Czech company Mora-TOP. Vega is one of the three bright stars of the summer-autumn triangle - with its brightness of many times greater than the brightness of the sun. Due to the minimum sizes, modern design and exceptional technical parameters, VEGA water heaters exceed all similar products available on the market.

Wall gas flowing water heaters VEGA E
fromelectronurgist

VEGA E flow water heaters are completely new "star" products of the Czech Mora-Top. Water heaters are designed to heat the economic water at home and in enterprises. Equipped with a battery pattering. 2 batteries K20 1.5 V. used as a source thanks to the minimum sizes, modern design and exceptional technical parameters VEGA water heaters exceed all similar products available on the market.

Gas Column "Mora" - Czech production product from Mora-Top, which has been producing heating and water heating equipment for almost two hundred years. In the review, we suggest considering the most popular line of columns of this brand, learn about their key characteristics and familiarize yourself with the opinion of users. So you can conclude - whether to buy a "Mora" column or continue the search for another brand products.

A little about the company

The Mora-Top began its 185-year history of Mora-Top as a subsidiary of Mora Moravia JSC. And since 2003, Mora-Top became independent. In the spring of next year, the construction of the plant began in the Czech town of Destroy. Power occupied 5,000 "squares" and was built less than a year so that in the spring of 2005 the world saw the first flow gas water heater Mora, released in a new factory.

Today, the company has a fully established technological chain of manufacturing techniques, including:

• Technology for the processing of copper and the manufacture of heat exchangers, as well as stamping, degreasing stage, soldering and staining.
• Production of thermoelements of construction.
• Assembling finished products within the mounting line.
• Mandatory instrument testing.

Basic line of columns Mora

Gas water heaters are represented by a number of lines, consider the most popular of them, stopping on the characteristics of individual models.

Vega Max

Wall-mounted Vega Max columns came to replace the old Mora® devices 370, 371, 5502 and 5502. What is their main advantage: the connecting dimensions have not changed, so those who have an old column has already served their time, will easily replace it with a new heater .

Suitable for both residential and non-residential premises with a thermal capacity of 17.3 kW. Consumption is 10 liters per 1 minute.

High quality parts are installed in heaters:

• Water-gas fittings Mertik - German production.
• Gas and ignition burners, heat exchanger from copper Czech manufacturer.

On a note! Copper pipes of the hot water apparatus are distinguished by a large diameter of 18 mm and a thick wall in 1 mm.

These devices are equipped with automatic support for the temperature mode of water, without binding to its volume. There are options for both Piezorozhig, so with an electric ignition (from two batteries / batteries of type R20 by 1.5 V).

All gas devices are highly safety, therefore, if there is no water stream, the gas valve does not work and the combustion products will not be powered into the room.

Vega.

Wall-mounted heater Mora Vega 10 and its "counterparts" from the Vega line are positioned by the manufacturer as a completely new "star product".

Interesting! The manufacturer's website mysteriously indicated that "Vega" 10 is one of three bright stars (most likely, we are talking about three versions - 10, 13 and 16), constituting the summer-autumn triangle, and its brightness is many times more than the sun .

Minimal dimensions that combined with the ultra-modern design solution of the housing, supplemented by the impeccable parameters of the heater, make these boilers among the best among the analogues, which today are presented on the market.

The advantages of the ruler

• modest dimensions;
• simplicity in technical and user service;
• full automatic operation;
• resource savings up to 10%;
• Efficiency up to 92%;
• the most economical way to ensure a DHW (hot water supply);
• smooth regulation of power modes;
• maintaining a user-chosen water temperature.

Dimensions devices

• Height: for VEGA 10 - 59.2 cm, for 12 and 16 - 65.9 cm.
• Width: For VEGA 10 - 32 cm, for 13 and 16 - 40 cm.
• Depth: For VEGA 10 - 26.1 cm, in versions 13 and 16 - similar.

It is one of the most compact water studies on the market, which also differ in the smallest diameter of the smoke channel, which constitutes only 11 cm.

Comfort level

• The flow heaters "Vega" 10, gas, equipped with German reinforcement, thanks to which the technique launches already under water dummy only 2.5 liters per 1 minute.
• This reinforcement provides for the autoinage of the specified temperature marks of water, which is especially relevant in the instability of the pressure (pressure) in the water supply network.

Parameters of economy

Columns, such as "Vega" 10, have one of the highest performance of efficiency around the world - almost 92%. A small but quite effective heat exchanger warms the incoming water by 15% faster than any similar device of another brand.

Reliability

Design solutions and innovations provide maximum degree of reliability of all Mora Top units:

• Moving parts of the device are fenced off from the water medium, therefore the flows are excluded in non-tight places of compounds. In other leakage devices, it is possible that it is necessary to replace a whole gas-water node, and it costs a lot of money - sometimes up to half the value of the entire instrument.
• Inside the heat exchanger in the tubes there are turbules that repel the scale from the walls of the unit, thereby speeding up the heating and extended the duration of the device.
• The diameter of the heat exchanger tubes, equal to 18 mm, not only does not give the salts to settle on the walls, but also contributes to the cooling of the walls of the entire node, excluding the overheating of the casing.

Security parameters

For security purposes, such moments and design features are provided:

• Water overheating limiter in the heat exchanger.
• The fuse of the reverse thrust of the combustion products - he will not get to get into the room if the chimney clogs.
• Special fuse of a flame that ensures the health of both burners (basic and fastened).
• If there is no water stream, the device will not start the burner.

Additionally

Also series aggregates are equipped with some technical solutions to facilitate operation:

• Piezoelectric ignition.
• The removal of exhaust combustion products through the chimney having a minimum diameter of the neck (gas) is only 11.5 cm.
• The possibility of using natural gas.

On a note! Units, in the title of which there is a prefix "E", for example 10 E, equipped with an electric vehicle.

Overview of popular models

Vega 10.

Specifications
Type of water heater	forthy
The method of heating	gas
Performance, l / min	10
Thermal power, kW	17,30
Pressure at the entrance, atm	from 0.20 to 10
Type of combustion chamber	open
Type of ignition	piezopodzhig
Gas control	there is
	yes
Water heater control	mechanical
	there is
Protection	from overheating
Installation
Dimensions (SCHVHG), mm	320x592x26.

Market value ranges from 11,500 to 13,800 rubles.

Based on user reviews, we revealed the strengths and weaknesses of the column.

Benefits:

• reliability;
• long batteries are not discharged;
• miniature sizes;
• efficiency;
• automation;
• simple control.

• the column is demanding of water pressure;
• difficulties in the supply of communications;
• overcharge;
• some details are made of plastic, so short-lived.

Vega 10 E.

Specifications
Type of water heater	forthy
The method of heating	gas
Performance, l / min	10
Thermal power, kW	17,30
Pressure at the entrance, atm	from 0.20 to 10
Type of combustion chamber	open
Type of ignition	electrophiggig
Gas control	there is
Automatic maintenance of water temperature at the output	yes
Water heater control	mechanical
Restriction of heating temperature	there is
Protection	from inclusion without water, from overheating
Installation	vertical, lower eyeliner, fastening method: Wall
Dimensions (SCHVHG), mm	320x592x26.

Price from 12,700 to 22 000 rubles.

Many users converted only on positive qualities, such as:

• stable work;
• reliable design;
• simple control;
• small dimensions;
• efficiency.

Mora Vega 13.

Specifications
Type of water heater	forthy
The method of heating	gas
Performance, l / min	13
Thermal power, kW	22,60
Pressure at the entrance, atm	from 0.20 to 10
Type of combustion chamber	open
Type of ignition	piezopodzhig
Gas control	there is
Automatic maintenance of water temperature at the output	yes
Water heater control	mechanical
Restriction of heating temperature	there is
Protection	from overheating
Installation	vertical, lower eyeliner, fastening method: Wall
Dimensions (SCHVHG), mm	400x659x261.

The price policy of outlets varies: from 12,500 to 20,4000 rubles.

As you can see, the promises of the manufacturer are large, and user feedback is ambiguous. But remember that the health and durability of such an appliance primarily affects compliance with the installation and operation rules.