What makes the shelves in the bathroom. How to make a shelf in bathroom with your own hands: ideas, materials, installation. Brous rack for bathroom

Most bathrooms have limited free space, in connection with which there are difficulties with the placement of various bath accessories and cosmetics.

For these purposes, shelves and mounted stands are used. It is quite comfortable furniture, but it has several serious flaws.

Lack of mobility. The shelves are fixed to the wall, if necessary, transfer them to a new place quite difficult. On the wall will always be traces of fixation in the form of holes. In addition, if the shelves or mounted bedside tables were used for a long time, then they certainly change the shade of wall decoration. Eliminate traces of fixation of the furniture are very difficult, and in many cases it is impossible. Only the complete replacement of wall cladding can fully restore their original state. Making repairs due to several shelves is economically unprofitable, long and difficult.
The walls in the bathroom are often separated by plasterboard plates. This building material is very fond of professional builders: it is easy to work with it, it allows you to avoid laborious operations, perfectly levels the surface of the walls, engineering communications can be hidden behind the trim. But plasterboard has two very serious disadvantages: low moisture resistance and extremely low figures of physical strength.
You should not believe the manufacturers claiming that they learned to produce moisture-resistant plasterboard. Try to lower a piece of material into water and you can personally make sure that it means "high stability" to moisture. If the material does not have direct contact with water, then the process of wetting still occurs, only slower. And the second lack of plasterboard plates is very low strength. No special dowels can guarantee the proper stability of shelves and bedside tables recorded to the drywall wall.

Why do we recommend using racks? They can be installed in bathrooms with any wall decoration, they have their own bearing elements. In addition, this furniture is mobile, if you wish, you can not only move on the bathroom, but also use in other rooms. And last. In terms of capacity, diversity and functionality, racks are much ahead of all existing options for bathroom furniture.

Initially, one common and most important advice. A large number of engineering networks are concentrated in the bathroom: cold and hot water pipelines, sewage, electrical wiring, ventilation system elements, etc. Place the rack should be in such a place so that it does not limit access to networks. This is very important not only for maintaining pipelines, but also for the fastest elimination of various emergency situations. As for design issues, there are several options for placing racks.

Accommodation Stellage	Short description
	Allows Maxim to use the free space of the bathroom. Such a rack has three vertical supports, shelves in the form of triangles or sectors (segment) of the circle. Pretty functional furniture, but linear parameters are limited to the angle sizes. The disadvantage is substantial limitations in length and width, the rack is considered stationary.
	The rack is installed at the free wall, it is possible to transfer furniture to another place as needed. Dimensions are limited only by the wishes of users. The number of shelves is coordinated with the number of users of the bathroom.
	The location of the shelving is a niche indoor bathroom. Niches may have different sizes, racking is manufactured with these parameters. A fairly common option to install furniture. The advantage is the maximum stability, the drop in the rack is almost excluded.

Bathroom rack

In the article, we will not tell about the various design options for interior, there is only one universal council. Choose the option of the rack and its location that you like. The designer advice can listen, but your decision must be final. None of the advisers will use the bathroom, do not judge them, what you like and conveniently you personally.

Materials manufacturing racks

Adhesive plywood. In all indicators cannot be considered an optimal solution. It is not only expensive, but also badly tolerates increased humidity and temperature.
Laminated OSP or chipboard plates. Operating indicators of materials are somewhat better than that of plywood. Disadvantage - plates are afraid of direct contact with water. After breaking through the water in the bathroom, such furniture will have to be overhauled or throwing out. And another problem - these materials are manufactured using artificial resins, and all of them in one or another quantities are distinguished by harmful chemical compounds (formaldehydes).
Natural boards. According to professionals, the best material for the manufacture of racks. Even a long stay in water does not lower wood quality, after drying it is completely restored its initial properties. As for the price, the small volume of expensive material allows it to acquire it to everyone without exception to consumers.

It is on the last material for racks we will dwell detail.

To facilitate work and improve quality, it is desirable to have several home woodworking machines: a reysmaus, a circular saw, a manual electric saw. If they are not, then you can do all work manually, but it takes a lot of time and effort, and the quality will be noticeably worse. A set of carpentry tools is required in any case.

Important. Before starting work, prepare the workplace. It must be clean and smooth, provide convenient access to machines and tables. Separately store the finished parts, remove the garbage in a timely manner. Experienced carpenters know that the time spent on maintaining order, it is estimated at the production of work. In addition, this is safety.

Step 1. Draw a sketch of the future rack. Dimensions Choose taking into account the parameters of the bathroom and the features of the objects placed on the shelves. You can do all the shelves are the same, you can decrease some of them or increase in size. In the drawing, you need to specify linear parameters, these data will be required not only during the work of work, but also to count the number of sawn timber.

Practical advice. Buy better planed edged boards, it will speed up work. The thickness of the boards is within 20 mm, the width is 15-20 cm. For bathrooms, it is recommended to use coniferous woods, they work better in conditions of high humidity. Coniferous lumber in their composition natural resins that prevent rotting processes.

Step 2. Start cutting material according to the drawing data. Planculate with this calculation to reduce the amount of unproductive waste. If the length of the sawn timber does not allow them to be used to the maximum, then you can change the size of the rack, at this stage it is not too late. All changes must be fixed in the drawing, do not keep up with memory. Often there are situations where necessary for one or another reasons to take a break in the work, a full-fledged changed drawing will help to avoid annoying errors.

The boards may have minor damage to the side surfaces, this is not a problem. During the assembly of the shelving, the defective surfaces are installed on the back of the furniture.

Cutting is much better to make a pendulum saw. It accurately withstands the cutting angles, leaves even edges. In addition, it is one of the safest woodworking machines. And plus - the pendulum saw allows you to regulate not only the cutting angle, but also depth, which makes it much easier to prepare the combination of separate wooden parts into a single rigid design.

Practical advice. If you have a lot of the same in size of the blanks, then never measure them separately. Use the first as a template and all subsequent make it on it. In this way, it is possible to avoid minor scatter in length resulting from errors in the measurement.

Step 3. Start the markup of the blanks under the connection. Before that, carefully sort them into account, taking into account the location of the front side, do not forget that all small wood problems need to be placed on the back side. Collect the same in size to collect together, align their ends with the coal and squeeze two clamps. Make the labels of each workpiece, they will be completely the same, which will facilitate the process of assembling the rack. According to the drawings under the square, make labels on the ends of the blanks. On these labels, it will be done by drinking boards for connecting the shelves.

Step 4. Make the same operations for vertical racks, pay attention from which side it is better to choose in Polterev.

Practical advice. Askolnik apply only on one side of the board. The fact is that the planes may have a slight deviation from parallelism. If you apply it from two sides, then the markup will be stamped.

Step 5. Drinking landing sockets for the shelves is much easier than electric jigsaw.

Before starting work, check the tool cut, it should be exactly 90 ° to the side of the board. Use only a good and adjusted tool, otherwise avoid marriage will not succeed. The marriage will always need much more time than on the preparation and testing of the tool. If you do not have an electric jigsaw, then the cuts can be made by a manual saw, but for this you will need to have more practical skills. Pay attention to the illumination of the workplace. The lack of light increases the likelihood of errors and very tires the eyes.

Duties jigsaw a little worsen the appearance of the cut, there are always small chips. If you want to have the perfect view of the shelves, then use a saw for figure cutting.

Step 6. Check out the condition of all billets. When detecting roughness or chipping slightly polish their sandpaper. At the same time, clean the pencil lines of the markup, if you cover the furniture with a transparent varnish, they will be noticeable.

Step 7. Start assembling the rack. Insert the propellers in the shelves into the cuts in vertical racks. Do not forget to keep track of what way the workpieces are turned with problem places. When you all sizes and cuts did correctly, the details will be increasing with a little effort. For assembly, use a wooden Cyan or an ordinary hammer. But between the details and the tool, be sure to make a laying of a small cutting board. This will exclude the appearance on visible surfaces of dents.

Practical advice. In inexperienced masters, the connection in Poltera is often turned out to be loosened that the rack is caused. In such cases, the assembly needs to be done using joinery glue. Large gaps after drying the adhesive will have to be embedded with special smeasters or sealants.

Step 8.. Screw the side boards, top and bottom to the collected shelves. You can fix them with ordinary self-drawing, pay attention to themselves from stainless alloys. Side surfaces can be collected on the clutch, but it is much more difficult to do it. Inexperienced masters do not advise you to use the clutches. So that the self-tapping screw is easier to screw, first drill in a hole with a diameter of 1.0-1.5 mm in a diameter of a diameter of 1.0-1.5 mm.

At this, assembly work on the manufacture of the rack is finished. Clean it from dust and cover with varnish, mourn or paints.

Brous rack for bathroom

By complexity, this option of making a rack is almost no different. But the appearance is completely different, you can choose from two options. A set of machines, tools and fixtures are the same as in the previous embodiment. For the manufacture of the rack, the bar is 45 × 60 for carrier racks and boards for the shelves. The optimal height for the rack is considered 1.5 m, the width of the shelves and the distance between them are adjustable independently. Works should be started from the drawing. Draw it as much as possible with the indication of all sizes and connectors.

Step 1. Sort the sawn timber, check their quality. Conduct the ends of the racks along the length, cut them off at an angle of 90 °.

Step 2. For rails, it is possible to use a timber cut in half the thickness. Cut the ram with a circular saw, work very carefully, do not forget about safety technician. Use wooden chopsticks for feeding a bar, do not keep your hands in the saw cutting area.

Step 3. Cut from the slats of the rail, dimensions according to the drawing. Measure exactly with the help of a roulette and a square. We have already mentioned that the segment of the billets is very convenient to make an electric pendulum saw. If you are engaged in the independent manufacture of wood furniture, then such a saw must be in the workshop.

Step 4. For fastening the crossbar on the racks you need to make rugs. The width of the propilov should be equal or to be slightly smaller than the width of the cross. Depth cut no more than half of the rack thickness.

Practical advice. To facilitate and accelerate the application of labels for the propil, first mark one side, and then apply the workpiece to it in width and apply the second label.

Step 5. Make the cuts on the racks. It is better to use stupid. This is a rather cheap, but very useful device. The cutting angle is adjusted and its depth is easily controlled. Stuslo has a saw with small teeth, which improves the quality of the ends. The depth of the cut will be slightly less than the thickness of the plates.

Step 6. Acute wide chisel Choose in the racks of the grooves under the cross. The chisels hold a flat plane to yourself, tapping the hammer on the handle, remove the pipes from the slots. If the bitch got caught, then reduce the width of the cutting tree, work with the chisel more carefully, do not rush. If the technology is violated, a large crack may appear, the rack will have to be selected. Check the chisel groove. It is not worth seeking to achieve great accuracy, this part of the groove is hidden crossing. The main condition is the depth of all grooves at the highest point should be the same.

Step 7. Connect two racks cross. Put them on the smooth table and with the help of the hammer put the cross in the prepared places. To increase the strength of the connection, screw the screws to the crossbar. Length depends on the thickness of the cross. But it must be remembered that for all the hardware hardware there is one universal rule: the thickness of the part connected must be no more than two thirds of the length of the methome. For example, if the thickness is crosslinked in our case, 20 mm, the length of the self-samples should be more than 30 mm. Of course, it is necessary to pay attention to the end of the self-drawing does not pass the racks through.

Practical advice. To eliminate the likelihood of splitting thinly connected elements in them, it is recommended to pre-drill holes with a diameter, somewhat less than the diameter of the methome.

Before twisting, it is desirable to fit the saddle and the alternate glue.

Screwing samorezov

Step 8. If you have a manual milling mill, you can make a figure with a figured cutter on the outer parts of the rack. The second sidewall of the rack is made in the same way. Next, you can begin to make the shelves. Boards are required from 20 mm thick, the width depends on the assignment of the rack and should be indicated on the previously drawn drawing.

Manufacturing shelves

Step 1. If the boards are not prepared, then it is necessary to climb them on both sides through a furious machine.

Practical advice. For those who have the desire to make wooden products in the domestic workshop, professionals strongly recommend buying one of the types of combined woodworking machines. They work from voltage of 220 V, perform a lot of operations, and in terms of the quality of the surfaces of the surfaces are not inferior to modern industrial equipment.

To improve the appearance of the shelves, treat their surface with a portable manual milling.

Step 2. Spice the places of adjusting parts with carpentry glue and fix the elements with self-draws. By the same algorithm, fasten all the shelves. Give the time to completely dry the glue, it will take at least 24 hours.

The glue is applied by a brush

Step 3. To improve the appearance of the shelving, all self-tapping screws need to be replaced with wooden clutches. The diameter of the clutch depends on the size of the furniture. Prepare a drill to drive holes under the clutch. Its diameter should be slightly smaller than the diameter of the clutches. Make a drill torque of drilling depth. For these purposes, you can simply wind at the desired distance from the end of the raspberry scotch tape or the isolate.

Remove the screws

Step 5. Slucik and hole squeeze glue for wood. Install the slot into the hole and score it in place. Surplus glue once remove the sponge moistened in the water. Remember that high-quality glue after drying is very difficult to remove from the surface, in most cases later it will be necessary to close the pollution sites.

Installation of ducts

In this way, fasten all the shelves on the rack.

If there is no desire to engage in the installation of the clutches, then during the connection, the screws need to make a larger diameter holes for their head. After twisting, the holes are closed with a putty on the tree of the appropriate shade.

Step 6. Finish finishing works. Clean the rack from dust, problem spaces are grinding with grinding. The collected rack can be left untreated, he will look very original and fashionable, many designers advise that way. But we recommend separating the external surfaces at least two layers of transparent varnish. Such a coating not only protects sawn timber from the influence of moisture, but much simplifies the process of furniture care. The fact is that the surface of the raw boards is quickly dirty, it is possible to remove stains only with grinding or full of painting. Conclusion: It is not always necessary to listen to the opinion of the designers, they do not use the shelving, they see it only in the picture of the design project.

Video - Rack do it yourself

The full operation of the bathroom is impossible to present without the presence of various sanitary accessories and accessories that optimize space and facilitate our lives. The most popular objects in the bathroom are all sorts of shelves and lockers. Sometimes there is not enough funds to purchase all these accessories or the products presented in the market are not suitable for a specific space in size or design.

There is always a way out! You can make such products with your own hands, taking into account the individual features and specific size of the room.

Of course, without competent drawing, the necessary tools and materials we can not do. Therefore, first of all, it is necessary to determine what type will be the future product (straight, corner, built-in, closed or open), and from what material (wood, glass, drywall and others). Depending on this, the following tools may need:

perfederator or screwdriver (screwdriver);
level and roulette;
saw on wood (metal);
a hammer;
billets from the selected material;
fastenings and brackets;
screws, dowels and corners;
for shelves from wood - primer, paint, varnish;
various additional details (hooks, moldings, holders) and other decorative components.

This list is not exhaustive, in each case there may be completely different devices, materials and fittings.

How to make a shelf in the bathroom with your own hands?

No matter what the future product is, there is a general sequence algorithm:

The material is selected from which the product will be manufactured, after studying all its operational characteristics.
A plan of the upcoming works is drawn up: it is necessary to make a sketch of the future design, in accordance with which all the necessary materials and tools are purchased.
Work on the processing of material: creation of fastening, addition to prepared accessories.
Installation of the shelf to the selected place and checking the stability of the product.

Stock Foto Original shelves in the bathroom made with their own hands

Shelves-banks
From mosaic
Suspended on twine
From old boxes
Built-in
Braided baskets
Outdoor option

From wood, dvp and mdf

Choosing a tree in the quality of the material for the future, it must be remembered - it should be of the highest varieties. The future product will consist of plates interconnected by small square blocks.

Before starting work, it is necessary to make billets from the tree or MDF required length and quantity (the wider it will be a product, the more it will be necessary). Then it is necessary to prepare the appropriate wood tool (carpentry set, screws on wood, dowels for fastening the shelf on the wall, special glue, paint or varnish).

Start mounting:

Each rail is made at the edges of the mark with the help of a construction pencil.
With the help of special glue on the marks, blocks are placed, which must be all the same size.
In the center of each block, there are also marks, on which holes are drilled (simultaneously with the rails) with a drill.
The design is assembled into a single whole. For this, you will need long screws that are squinted into the holes and screw in the screwdriver.
After collecting the design, it must be fixed to the wall. But before this product, you can give a noble view by treating varnish or special paint. To install the shelf, it will be necessary to prepare a level and roulette. After accurate measurements and applying marks on the wall, you must drill holes and insert the dowels in them. In order to carry out the installation of the shelves, they will also need special attachments installed on the design itself.

This version of wood products perfectly suitable for room with high humidity, because liquid will not accumulate on it. So, how is the angular regiment in the bathroom do it yourself? Read more about it.

Angular type

If there is a free angle in the bathroom, then you can make a small one. Materials for its independent manufacture can be: wood, chipboard. It is necessary to produce an angular design in two consecutive stages:

We prepare the details. The selected material should be a thickness of at least 6 mm. To begin with a sheet of paper, the middle is marked and the circle is drawn. The radius is selected depending on the size of the shelf. After that, you need to attach a circle to the workpiece and cut with a jigsaw. The circle is divided into four identical parts with the help of the square, each of which is cut off with a hacksaw. As a result, four angular shelves should be.
We make grooves in the rail. Wooden rail should be attached to the angle where the future regiment will be located. Then the boundaries of the upper and lower shelf are placed. The middle shelf will be placed in the middle, so it is necessary to measure the same distance. After all markups are made, you need to make grooves in which the shelves will be inserted. To do this, attach the shelf and outline with a pencil from two sides. According to the specified labels, it is done propyl, the depth of which should be no more than half of the rail. Duties are made for each shelf, which should be included in the grooves with difficulty. Similar actions must be done with the rest of the shelves. If necessary, you can passion edges.
Install the angular regiment. There are several installation options. The first: using fastening bolts. Second: mount on mounting glue. To do this, you will need a special glue by which the wooden rail will be connected to the ceramic tiles. A layer of glue is applied to the back surface, and that the rake does not slide, you can use two-way tape, which is glued in three places - at the bottom, at the top and center. After drying the adhesive, shelves are installed in the suited grooves.

Before mounting the shelves, they can be treated with moisture-resistant paint or special film. This will make a product more durable. You can show fantasy and take advantage of various decorative elements or restrictive sideboards.

The next video will not only tell, but also show all the stages of manufacturing an angular shelf in the bathroom with their own hands:

From glass

If the choice fell on the glass, then it is necessary to remember that the material should be a thickness of at least 5 mm. You can buy already ready-made glass of the necessary sizes, and you can order crucible and processing in a special workshop. In addition to conventional transparent glass, you can find a material with a matte coating, in different colors and with a variety of texture. Alone or in the workshop glass is cut in the desired size and form. It is also necessary to process the edges of the glass in order to avoid possible cuts.

Given the thickness of the glass and further operation, decorative brackets are selected. You can find small holders in size or in the form of profiles. The market presents a large range of similar accessories.

Brackets differ depending on the type of fastening:

with the drilling of glass (for wide shelves in which you need to make a hole for the bracket);
without drilling (suitable for shelves, which have a width of no more than 20 cm).

After that, the holder of the shelf must be fixed into the wall with a drill, and then place and fix the prepared glass into it. For more reliable attachment, you can use rubber gaskets. And in order to prevent the drop in items from the shelf, you can install a decorative limiter on the edge.

About how to make shelves made of drywall in the bathroom with their own hands, you will learn further.

In more detail about the process of manufacturing a shelf of glass will tell the following video:

From drywall

The production of shelves from this material is one of the most unemployed and inexpensive options. In addition to the drywall itself, there will be special profiles for fastening, which can be purchased at any building materials store (CD and UD). With their help, you need to construct the core, and copold with its special self-draws.

If plasterboard is used in the walls of the bathroom walls, then you can immediately make a niche for small shelves in which all accessories will be stored. However, the material itself does not have resistant to moisture, therefore, after mounting the frame and its cladding plasterboard, it is necessary to use another finishing material, such as a ceramic tile.

The shelf of plasterboard can be supplemented with glass shelves, which are attached to decorative holders. An additional decoration of such a shelf can be the LED backlight, which will require an aluminum profile for fastening.

About how to make built-in shelves from tiles, wood and other materials in the bathroom, we will told finally.

The next video will dedicate you in the subtleties of the manufacture of the shelves with their own hands from the plasterboard. Believe me, your bathroom will look just wonderful with them:

Built-in product

This type of shelves is made in the wall niche or under the bath.

In the first case, the most optimal option is the manufacture of shelves from drywall, which are then burst with ceramic tiles. How to make a frame and shelves made of plasterboard was mentioned above.
For the manufacture of built-in shelves, you can also use glass or wood, and using special holders to install them in a niche.
Shelves can be built into the space under the bathroom, which are closed with a special screen. For their device, you can use already ready, which are attached to the side walls. Thus, a full-fledged locker is obtained, in which business products can be stored, household chemicals and other accessories.
There are other options for the shelves on their own on their own with which you can find on sites dedicated to the products and accessories for the bathroom. The main thing in this matter is not to limit yourself with simple decisions, and find a fresh idea and embody her!

High-quality furniture in the bathroom, allows you to create a strong and practical interior. Here for each little things there is a certain place. Due to this, the room seems spacious and cozy. Modern technologies offer our attention a huge variety of furniture attributes. It has unusual forms and sizes that perfectly fit into any zone of relax.

Surely many consumers prefer the presence of homemade structures that will reflect the subtle taste of their owners. These items are filled with meaning and spiritual warmth.

Beautiful bathroom shelves with their own hands, allow distribution of household trivia. Thanks to them in the interior space, all the details are in place.

What are the advantages of homemade shelves?

Homemade shelves have a number of advantages than flaws. These include:

interior decoration. On the Internet there are hundreds of shelves for the bathroom, which allow you to choose the appropriate option for any space. Homemade structures are neatly fixed on the wall surface;
here you can select any material and coating for the manufacture of the structure;
in the structure of the suspended shelves, up to 6 elements may be present.

In the process of manufacture, it is important to consider the weight and items that will be located here. Before proceeding with the construction of the structure, it is necessary to deal with the type of shelves for the bathroom.

Types of products and their applications

There are several types of shelves. They differ in their structure and application area in the interior space. These include:

Removable products. They have a minimum weight and have good mobility. They can be placed in different parts of the bathroom. This option is ideal for various redevelopments.
Suspended models. They are most often used in small-sized spaces, where every cm plays an important role.
Corner shelves. This species is also used in small bathrooms. They are neatly fixed in the angular parts of the room.
Outdoor structures. The model is suitable for spacious rooms. There is a spacious storage system.
Stationary shelves. This option is not subject to dismantling. They are fulfilled at the initial stages of finishing work. The structure includes drywall and ceramic tiles. They help to make a strong base, which will serve quite a long period of time.

Materials for the manufacture of shelves

What can make the shelf in the bathroom? Most often for this use:

plastic;
tempered glass;
stainless steel;
wood;
panel chipboard and MDF.

Choose suitable components for shelves, it is necessary to consider constant humidity. The optimal option is considered plastic and chipboard panel with protective coating. These materials are able to withstand daily injection tests.

Master class on creating a shelf for the bathroom

We bring to your attention a detailed instruction how to make an outdoor shelf with your own hands. The design will consist of 3 departments. Before proceeding with the design of the design, it is necessary to prepare the following materials and tools.

For this we need:

building level;
roulette;
a hammer;
hacksaw;
screwdriver and screwdriver;
wooden boards;
detailed drawing of the future product;
fastenings and brackets;
spacure solution;
acrylic paint;
brush;
saws.

The manufacture of the shelf is divided into several stages:

On the surface of wooden boards make marking. Here we celebrate the height of the future design and its width. Next, with the help of the hacksaw drink each element. As a result, two reference bases and three elements of shelves should be obtained.

After that, go to the installation of the shelf in the bathroom. Here we will need angular fasteners and self-tapping screws.

On the side of each detail we strengthen one fixer. After that, we connect all the details among themselves. Holes in the places of fasteners are smeared with a putty and leave until complete drying.

The final action will paint the entire design. For this, the brush is applied a thin layer of acrylic solution. When it dries, go to the subsequent layers of decorative base.

Stock Foto Shelves for bathroom with her hands

In the bathroom, everything should be at hand: soap, toothpaste, shampoos, numerous cosmetic jars and other little things needed for hygiene, beauty and comfort. Where to place the whole set so as not to break the design and not clutter a small room? The shelf in the bathroom can be made of affordable and practical materials. It will become not only a convenient location for storing bath accessories, but also a stylish element of the decor of the room. From the proposed options, everyone will find what to taste and forces.

Shelves made of drywall in the bathroom with their own hands: step-by-step instructions with photos

If the idea to equip the bathroom with spacious "repositories" came during major repairs, then you can include a shelf or niche plaster plans. Using this lightweight material, it will not be difficult to obtain original and functional shelves on empty places - above the bathroom, in the corners, above the washing machine and the toilet. The main thing is not to forget that only moisture-resistant plasterboard is allowed in the bathroom.

Moisture-resistant plasterboard for the bathroom

Plasterboard is different sizes: from 2 to 4b5 m long, and a width of 1.2 to 1.3 m. The thickness of this material varies from 6 to 24 mm. Think over the load that will fall on the shelf and buy the appropriate material. To work on the installation of shelves from plasterboard, you will need materials and tools:

galvanized profile, preferably 50x25 mm;

Types of galvanized profile

rail guides;
plasterboard;
reinforced grid for fixing putty;
self-tapping screw;
screwdriver;
putty knife;
level;
primer.

This is incomplete, but the main list of materials that you may need. After building a sketch, calculations and measurements, we proceed to the installation.

Drawing with ceiling shelves made of drywall.

The first step of building the shelf will be the fastening of the profile in accordance with the drawing.

Mounting profile for drywall

After fixing the profile, create a framework frame, i.e. Freakim guides.

Guides are longitudinal and transverse rails. Here again you need to remember the load on the shelves. If the load is not small, then the rail must be attached carefully, and the jumper is inserted between the profile and the guides.

The next step start to mount plasterboard. First, the top covering.

Sewing shelves with plasterboard begins from above

Krepim all the other sides from above-down.

Shelf shelves Gypsum Carton

We begin finishing the finished design of putty. The first step is to apply a reinforcing set of all joints and angles.

Application of the reinforcing mesh on the joints of the sheets of plasterboard

Fort the surface is uniformly. Putty-soil will not only give the surface to a homogeneous appearance, but will additionally protect against moisture.

Protecting the surface of plasterboard

After drywall dry, it is necessary to take a shallow sandpaper and start the finish finish. For example, stick the tile or just paint.

Capital Outdoor Plasterboard Locker

Choosing the shape of the shelves, it is recommended to pay attention to the niches - they look much more effectively solutions and visually do not reduce the space. If you wish, the niche can be added to the backlight, having received the original design and cozy bathroom.

Spacious niche in the bathroom wall

Quickly and clean: Shelves for a glass bathroom

The main advantage of glass shelves is that they are literally dissolved in space and do not reduce the visual area of \u200b\u200bthe room. It is also important that the glass is not afraid of high humidity, it is easy to clean and is not covered by stains after contact with detergent. To equip the bathroom with glass shelves, it is not necessary to wait for major repairs - their installation is not associated with dirty processes. Glass furniture looks stylish and does not require special skills and professionalism in order to make it with their own hands.

Glass shelves look stylish and fit into any interior design.

First of all, you should buy a glass with a thickness of at least 4 mm and cut it into a glass workshop on the pieces of the desired dimensions. Instead of traditional transparent glass, you can take a color, texture or matte, mirror or plexiglass - it all depends on the individual preferences and style of the interior.

Brackets and glass are chosen to taste and taking into account the style of the interior

The thickness of the glass and taking into account the general direction they select decorative brackets. By design brackets for glasses can be in the form of small elements and in the form of profiles. The choice of this accessure cannot but rejoice: there are chrome holders, bronze and gold, painted in black or trendy bright color. By type of fastening, holders are distinguished with the drilling of glass and without. The first, as a rule, suitable for a shelf width no more than 20 cm. For wide shelves, the brackets are more suitable to which the glass is screwed through the hole drilled in it.

Geese glass perfect for small room

Fastening a glass shelf with their own hands is available to any homemade crappy, who has a drill and skills to work with this tool. The bracket is attached to the wall, and then insert the glass into it and fix the glass. If you wish, you can install a decorative limiter that will warn the drop in tubes and jars.

Original and easy: rope shelves from wood or laminate

For the design of the bathroom in the style of a country or with a sea bias, a simple, but practical suspension rope, whose shelves can be made of wood or laminated chipboard. The work will require a plank that you can buy in the store or search among unnecessary furniture. Excellent shelves will get out of the door of an old cabinet or chest, if you give them a second life with a decorative moisture resistant film.

It is even easier to use a laminate or parquet board as the basis. If these materials remained from repair - perfectly, if there is nothing in the house, then you need to go to the store and buy one board of moisture-proof laminate of suitable color.

Rope shelves forces to make even a woman

Looking at the photo of the finished shelves on the ropes, it is easy to understand the principle of their manufacture: in the boards drill through holes, through which the solid rope is passed from top to bottom. Under each hole, it is necessary to fix the position of the rope using a node or a wooden strut. At the top left the loop so that you can hang the design on the hook, and the lower ends fix the nodes and decorate.

This is how the shelf on the ropes is going without a nail and screw

If you like the idea, instead of the shelves from the chipboard, you can use wicker baskets - in this case it will be a small suspension locker, in which it will be convenient to store towels, means for the shower and other necessary things. In order for the rope structures not to look alone, in order to continue the cable topics, you can wind up a rope of several accessories, weave the rope holder for towels, suspend the mirror on it or make a frame from the rope.

Shelf in bathroom from plastic bottles with their own hands: video

Waste in revenues: shelves for bathroom from unnecessary things

A wide ceiling eaves remaining after repair can be used as small shelves for trifles. It is most practical to choose Moldings from polyurethane for this purpose and attach them to walls with liquid nails. Of course, heavy items on these holders are better not to put, they are more suitable for decor, souvenirs and small items.

Wide ceiling eaves withstand small tubes and decor items

Plastic pipes are another valuable material that can be turned into an original design for storing towels and other important things in the bathroom. Pipes can be the same or different diameter, they can be placed in touch with each other or at a distance, at right angles to the wall or under a slight inclination. If desired, plastic is sealed with a colored laminating film.

In the event that the elements will be placed on the wall separately from each other, each circle will be attached. Another option is to bind to each other, and then hang the finished design to the selected place.

Such a design can be made it from pipes, cans or hat boxes

If the house does not apply an unnecessary basket, it makes sense to look at it on the other side and turn it into a stylish miniature cabinet for towels. The basket can be attached straight to the wall or fasten on the holder. A wonderful pendant shelf will be out of 2-3 baskets that can be the same size or differ around the perimeter.

Round baskets in the role of holders for towels

Working with plasterboard requires experience - it is important not only with maximum accuracy to clear the whole design and collect it, but also correctly treat the material, given the increased humidity of the room. For those who do not have skills in repair work, it is better not to risk, and immediately entrust the complex process of professionals.

Video: Corner shelf for bath do it yourself

The comfort is created not only with the help of the proper bedroom equipment, living room, kitchen. A good apartment begins with an entrance hall, ends - a first-class bathroom. The comfort in the house should rule each corner in each room. Bathroom is not an exception to this rule. It is important to create such an interior to be comfortable to be yourself, inviting friends close to visit.

A cozy bath means not only the right plumbing, it is still a lot of additional accessories. For example, towel holders, bathroom shelves, paper hooks and bathrobes, towels themselves, soap accessories.

Beauty consists of small things that need to be carefully thought out to connect to a single integer, called their own home. Not in vain they say "My house is my fortress," indeed the place where the person hurries to come quickly.

Statistics show that for life, 15% of the free time, a person spends in the bathroom space, washing, having flimsy, having wrapped around. So, it makes sense, bring everything in such an order - so that it is necessary to be in sight, I did not have to spend extra time in search.

The Internet provides access for a variety of photo shelves for the bathroom, browsing which you can approximately decide with your wishes so that in the future to gain something like that.

They store creams, shampoos, balms, vegetable oils, masks, soap, toothbrushes, towels. Do not exactly copy the style seen in the picture, but it is necessary to repel from something.

Select accessories. Beautiful, unobtrusively, cheap ...

The offer of the products for bathrooms is so great that it is possible to get confused, just get lost. For a start, try to understand what material is closer to you.

After all, there are plastic shelves, wooden, metal (alloy of stainless steel, copper), glass, ceramic. Supporters of all natural generally are often looking for shelves from natural stone.

It is best to consult with a professional who is engaged in the equipment of the bathrooms. I decided to do everything yourself - be sure to learn to find out what modern shelves should be in the bathroom. Create fashion directories, articles of modern decorators, designer tips, magazine publications.

There is no universal material for products in the bathroom, but everyone finds one of the proposed ideal.

First, plastic shelves need to choose high good quality. Plastic can often crack under the influence of negative environmental factors. Poor-quality plastic - not aesthetic defects will appear, which will spoil the general view of the room. Use the seller, whether the plastic is high-quality, from which the goods have been completed, how long it can be operated, what weight will endure, it gives away high temperatures.

Although from plastic you can choose the most inexpensive and intricate shelves. Any shapes, colors, textures. Modern light industry does not cease to please us with new and new compositions for the manufacture of similar products.

Secondly, choosing a metal shelf, be prepared for possible manifestations, corrosion, soap divorce. But by purchasing a good detergent for such cases - you can always contain this organizer clean. A couple of right movements with a sponge, moistened with detergent - everything is clean, glitters, continues to delight the owners.

Stainless shelves for the bathroom - just perfect output, if you have a compressed, limited space, such as if the bathroom is combined. It is necessary to fight for each free centimeter to achieve greater ease, space openness.

Regarding glass and stone, too, should be immediately stocking detergent, cleaning arsenal, to combat divorce - the consequences of a constant steam indoors. But the visual enjoyment you get unambiguously. They always look high quality, more expensive than in fact.

The stone gives the interior of the premises of particular elegacity, idleness, majesty. This option will dilute the paint, add brightness, freshness, and will perform the main function - the storage of the necessary things.

How to increase the size of the room

It will not be secret that it is possible to visually expand the face with mirrors. What they are more, the more spacious becomes around. For you there is an excellent choice - a mirror with shelves in the bathroom. Usually they are different configurations - with doors, with a glass stand inlaid by broken glass or rhinestones.

There is an opportunity to choose how much the original option you are willing to see daily. Definitely - beautiful, multifunctional, because the mirror definitely should find his place next to the shower.

It is very important - if there are small kids, try to secure the mirror at a permissible level, so that it was unrealistic to accidentally drop it on myself. It is better to provide such a situation so as not to be grieving due to the consequences.

It is better not to put heavy metal objects on mirror shelves. With an inaccurate movement, it is possible to damage the integrity of the fragile glass. It is not necessary to overload such shelves, the connection between the elements is usually performed from rubber mounts, brackets - such quickly wear out.

One of the know-how is the so-called "built-in shelves", which are performed from the design of the drywall with other materials. Including mirrors, hardened with colored glass. Please note that only moisture-resistant plasterboard, which does not absorb moisture, is needed. Otherwise, you risk a long time to rejoice at the interior.

From moisture-proofing plasterboard structures, shelves under the bathroom are made, on which the washing powders are traditionally stored, soaps, cloths for cleaning, so on. It is not bad to make them hidden from prying eyes. No one can delve into your personal space. Girls are comfortable on such shelves to leave personal hygiene products, intimate accessories.

Not only in the material difference

By type of fasteners, it is customary to distinguish between a few more types:

Stationary. Such are installed on the floor, often higher than human growth, can accommodate a lot of useful on themselves. Additionally, they can be attached to the wall (in case of having small curious children) or screw in the hooks into the ceiling.

Usually made of wood, metal, plastic or combined materials. But this does not affect the capacity and other indicators. For large rooms - it is just perfect.

Hinged. From a small organizer for toothbrushes to full-fledged shelf systems for the entire length of the wall. By the way, it is such products that will help to delimit (zonate) a common space, not clinging to it. The same type includes shelves-drying, on which not only hygiene items can be placed, as well as wet washcloths, towels, brushes.

From the point of view of saving space, a favorable solution can be obtained 2 in 1. It is beautiful as possible. Drying will come in handy in any bathroom combined with a shelf for various little things - especially.

Corner shelves in the bathroom. Over the past decades, they have become the most popular among consumers of various classes. The practical, convenient device, with which you can increase the workspace, without reducing the total room.

There are copies that occupy a place from the floor to the ceiling, there are standard on 3-4 shelves. Must both inpatient and suckers. Usually there are two types of manufacturing material: plastic, metal. Less often meet glass, drywall.

Furniture on suckers - to be

Good designer solution - shelves in the bathroom on suction cups. For installation, you do not need to drill holes in the wall, fix additional hooks, disrupt the integrity of the coating. It is enough just to close the rubber suction cup tightly tightly, it itself will fix in the correct position. It does not require additional efforts from a person.

Suitable for those who are not always sure that it posted them as convenient as possible. If necessary, you can disconnect, transfer to another place, and there will be no traces of fastening on the previous one. It should be borne in mind that usually such shelves are made of light plastic alloys, respectively - are not designed for a large weight of accessories.

Each type of shelves have the benefits, the choice is always for the owner - what kind of bathroom needs it. The main types have already been discussed earlier, so there is something to think about what to choose from.