Profession Installer frame-in-wing structures (4th category) in a single tariff qualifying directory. Installer of frame-and-walled structures How to undergo training on the installation of framework and trim structures
Training of the installer of frame-of-shearing structures in accordance with the order of the Ministry of Labor on the social protection of the Russian Federation dated March 10, 2015 N 150N "On approval of the professional standard" Installer of frame-and-shearing structures "," List of workers' professions, employee posts for which vocational training is carried out ", Approved by the order of the Ministry of Education and Science No. 513 of 2.07.2013, "On Approval of the List of Workers 'Professions, employee posts for which vocational training", the requirements of a single tariff-qualification reference book of works and professions of workers, the all-Russian classifier of workers' professions, employees and tariff discharges.
Modern construction requires compressed deadlines and energy-efficient solutions. Therefore, the erected frame buildings and structures today are increasingly competing with similar buildings from brick and wood. The use of frame-and-wing structures also found itself in the interior decoration of the premises - these are all sorts of plasterboard overlap using various metal profiles and wooden frames.
The basis of the profession of the assembly of frame-and-shearing structures is a device of enclosing structures, repair, reconstruction and finishing of the internal and external surfaces of buildings and structures using complete systems of dry construction.
The profession of the installer of frame-and-shearing structures involves the presence of the following knowledge and skills: be able to install single-layer, two-layer partitions, single-level and two-level suspended ceilings made of plasterboard and dry-fiber sheets on metal and wooden frames; Installation of internal partitions from cement plates of type on metal and wooden frames; marking of the installation locations in the design position of frame-and-wing structures using a manual tool; Installation of lighthouses; cutting plasterboard, hydro fiber sheet materials, guide and rack profiles of metallic and wooden frames; installation in the design position and fastening of guide and rack profiles of metal and wooden frames; Installation and fixing on a metal frame of plasterboard and dry-fiber sheets. Laying sound and thermal insulation materials; putty of uneven surfaces, gluing drywall and dry-fiber sheets; make the preparation of mounting, adhesive, waterproofing mixtures and solutions from dry construction mixtures on cement and plaster-based manually and mechanized method; polling and stirring solutions; transportation of materials used, devices, tools, inventory tables, stepladers, inventive stairs within the working area; Disassembly of simple structures in the production of repair work, etc.
To carry out the work, the installer of frame-and-shearing structures must pass vocational training, no more than 1 time per year and at least 1 time in 5 years undergo short-term advanced training courses in the amount of at least 72 hours in order to acquire new knowledge and skills and raising the discharge, Have a medical book with a lack of contraindications to work. It is important that for the work of the frame of frame-and-shearing structures, people under the age of 18 are not allowed.
Cost of learning and deadlines
Ano DPO "Comprehensive Training Center of Retraining Personnel" conducts vocational training in the following programs:
Form of study: Full-time, part-time, remote with the use of "Internet" -Technologies.
In the process of mastering the training programdeveloped taking into account the order of the Mintrud on the social protection of the Russian Federation of March 10, 2015 N 150N "On approval of the professional standard" Installer of frame-and-shearing structures ", the Order of the Ministry of Labor of Russia No. 513 of 2.07.2013" On Approval of the List of Workers' Professions, employee posts for which vocational training is carried out "for mastering working profession of the installer of frame-of-shearing structures The following questions are studied:
- Economics of the industry and enterprises
- Materials Science
- Electrical engineering
- Construction drawing
- Basics of construction production
- Labor protection and safety
- Mounting technology frame-and-wing structures
Classes are held in the educational class ANO DPO "Complex Training Center for Personnel Retraining, as well as through the" Internet "-tal site of the Training Center.
Upon graduation issued
- Certificate for each employee who has passed certification;
- Minutes of the Attestation Commission with a list of employees who have passed certification.
How to undergo training on the installer of frame-of-shearing structures
After passing vocational training (or in a specialized school, or the school center), the installer of frame-and-shearing structures requires an annual passage of short-term training courses in a volume of at least 72 hours no more than 1 time per year and at least 1 time in 5 years.
Advantages of working with ANO DPO "Comprehensive Training Center for Personnel Retraining"
- all training programs are developed by educators, taking into account modern educational and methodological materials using new technologies in training;
- for you, a convenient form of an electronic library for graduate materials has been developed;
- the cost of studying on the assemblyman of frame-and-shearing structures is significantly lower than other training centers;
- training takes place at a convenient time for you and in the form required for your organization.
What entails not passing the advanced training on a period of more than 5 years?
Unified Tariff Qualification Directory of Works and Professions of Workers (ETKS), 2019
Issue №3 ETKS
The issue was approved by the Order of the Ministry of Health of the Russian Federation of 06.04.2007 No. 243
(Editorial: orders of the Ministry of Health and Social Development of the Russian Federation of 28.11.2008 N 679, from 30.04.2009 No. 233)
Installer frame-in-wing structures
§ 147a. Installer of frame-and-walled designs of the 3rd category
Characteristic of work. Installation of single-layer, two-layer partitions, single-level and duplex suspended ceilings made of drywall and dry-fiber sheets on metal and wooden frames. Installation of internal partitions from cement plates of the AquaPanenel type on metal and wooden frames. Marking of places of installation in the design position of frame-and-wing structures using a manual tool. Installing beacons. Cutting of plasterboard, dry-fiber sheet materials, guide and rack profiles of metallic and wooden frames. Installation in the design position and fastening of guide and rack profiles of metal and wooden frames. Installation and fastening on a metal frame of plasterboard and gypsum fiber sheets. Laying sound and thermal insulation materials. Screaming of uneven surfaces, glittering drywall and gypsum fiber sheets. Preparation of mounting, adhesive, waterproofing mixtures and solutions of dry construction mixtures on cement and plaster-based manually and mechanized method. Focusing and mixing solutions. Transportation of materials used, devices, tools, inventory tables, stepladders, inventive stairs within the working area. Disassembly of simple structures in the manufacture of repair work.
Must know: Methods for mounting single-layer, two-layer partitions, single-level and two-level suspended ceilings made of plasterboard and dry-fiber sheets on metal and wooden frames; Rules for mounting internal partitions from cement plates of the AquaPanenel type on metal and wooden frames; Methods and methods of markup places of installation of frame-in-wing structures; Rules cutting sheet materials, guide and rack profiles of metal and wooden frames; Purpose and methods of preparation of mounting, adhesive, waterproofing mixtures and solutions made of dry construction mixtures on cement and plaster-based; appointment and rules for applying tools used, fixtures and equipment; The rules for transportation and storage of materials, parts, devices and tools within the working area.
§ 147b. Installer of frame-and-wing structures of the 4th category
(introduced by order of the Ministry of Health and Social Development of the Russian Federation of 30.04.2009 No. 233)
Characteristic of work. Installation of three-layer, multilayer partitions and multi-level suspended ceilings made of plasterboard and dry-fiber sheets on metal and wooden frames. The device of the prefab "dry" floor based on two-layer, multilayer gypsum fiber sheets or cement plates of the AquaPanenel type. Alignment of the surface and leveling of dry fridge under the floors. Installation of outdoor structures from cement plates of the AquaPanenel type on metal and wooden frames. Installation of outdoor facades like "warm wall". Installation of puzzle plates. Marking of places of installation of frame-in-wing structures using a laser instrument. Facing the surfaces of the rooms with frame-in-wing structures made of plasterboard and dry-fiber sheets on metal and wooden frames. Facing the inclined surfaces of rooms with plasterboard and gypsum fiber sheets. Facing the surfaces of mansard premises by plasterboard and gypsum fiber sheets. Installation of frame-and-wing structures of a complex geometric shape into a design position. Installation and fastening of guide and rack profiles of metal and wooden frames of a complex geometric shape. Framing of door and window openings. Performing simple work on the repair of trim, facing, floor bases.
Must know: Methods for mounting three-layer and multilayer partitions, multi-level suspended ceilings made of drywall and dry-fiber sheets on metal and wooden frames, outdoor structures from cement plates of the AquaPanenel type on metal and wooden frames; The order of the device of the prefab "dry" floor based on two-layer, multilayer and gypsum fiber sheets or cement plates of the AquaPanenel type; Methods of facing the inclined surfaces of rooms with plasterboard and gypsum fiber sheets; rules for marking places of installation of frame-and-wing structures using a laser instrument; rules for the installation of metal and wooden frames of a complex geometric shape into the project position; Rules for reading work drawings; Ways to perform simple work on repairing trimming, facing, floor bases.
§ 147B. Installer of frame-in-wing designs of the 5th category
(introduced by order of the Ministry of Health and Social Development of the Russian Federation of 30.04.2009 No. 233)
Installation of suspended ceilings from acoustic plasterboard sheets. Fastening carcase profiles to the base ceiling with special suspensions. The device of niches, false columns, internal domes and arches from plasterboard and dry-fiber sheets. Installation of ventilated facades of buildings using cement plates of the AquaPanenel type. Sealing angular joints, seams between facing plates and tapping places with putty. Grinding of seams after shtlivania. Installation of protective corner profiles. Cutting and manufacture of elements of frame-and-wing structures of complex geometric shapes. Cutting and making elements of complex design frames. Production of templates of individual elements of frame-and-wing structures of complex geometric shapes. Selection and acquisition of materials and details in accordance with the project manufacturing project.
Must know: the order of installation of suspended ceilings from acoustic plasterboard sheets; Methods for fastening carcase profiles to the base ceiling; Methods of the device niche, false columns, internal domes and ardines from plasterboard and gypsum fiber sheets; The order of sealing angular joints; Purpose and methods of making patterns of frame-in-wing structures of complex geometric shapes; Rules of cutting and making elements of framework of frame-in-wing structures of complex geometric shapes and complex structures; Rules of selection and acquisition of materials and parts in accordance with the project work project.
§ 147 Installer of frame-in-wing designs of the 6th category
(introduced by order of the Ministry of Health and Social Development of the Russian Federation of 30.04.2009 No. 233)
Characteristic of work. Installation of raster and rush suspended ceilings with styling of sound and thermal insulation materials. Installation of ceilings of curvilinear and broken forms. Selection of decorative materials and facing of frame-and-wing structures using decor elements. The cutting and manufacture of individual elements of the non-type frames of frame-in-wing structures of complex geometric shapes. Facing of complex, non-type units of conjugates of various frame-and-wing structures in accordance with working drawings. Installation of additional frameworks for mounted and technological equipment. Production of patterns for curvilinear and broken shapes of the sheatting of frame-and-wing structures. Calculation of the required amount of materials for relevant frame-and-wing structures. Reference quality control and volumes of work performed. Maintaining profit-expenditure and executive documentation.
Must know: the order of installation of raster and rack suspended ceilings; Methods of mounting ceilings of curvilinear and broken forms; the order of selection of decorative materials; Methods for performing decorative facing of framework framework-in-wing structures; Basics of design and technology cutting and manufacturing individual elements of non-type framework framework-and-wing structures of complex geometric shapes; Purpose and methods of making templates for curvilinear and broken shapes of the conveying of frame-in-wing structures; rules for conducting the performance of the quality and volumes of work performed; Rules for maintaining profit-expenditure and executive documentation.
Approve
The president
Onno "National Association of Self-Regulatory Organizations
A. S. Pushkin
JOB DESCRIPTION
installer of the basic frame-in-wing designs of the 3rd category
Divisions "Gypsum Technologies"
1. General Provisions
1.1. This, job description defines the functional, job responsibilities, rights and responsibilities of the installer of the basic framework-and-wing structures of the 3rd discharge of the Gypsum Technology unit (hereinafter - the installer of the basic frame-and-wing structures of the 3rd category) Onno "National Association of Self-Regulatory Organizations (hereinafter ).
1.2. A person satisfying the following requirements for education and training is appointed to the position of the assemblyman of the basic frame-in-wing structures of the 3rd category.
Special conditions of admission to the work of the installer of the basic frame-in-wing structures of the 3rd category:
1.3. The installer of the basic frame-in-wing structures of the 3rd discharge should know:
1.4. The installer of the basic frame-in-wing structures of the 3rd discharge should be able to:
1.5. The installer of the basic frame-in-wing structures of the 3rd category is appointed and exempt from office by order of the President of the Institution in accordance with the current legislation of the Russian Federation.
1.6. The installer of the basic framework-and-wing structures of the 3rd category obeys the president of the institution and the head of the Gypsum Technology unit
2. Labor functions
3. Official duties
4. Rights
The installer of the basic frame-in-wing design structures of the 3rd category has the right to:
4.1. Request and obtain the necessary information, as well as materials and documents relating to the activities of the installer of the basic framework-and-wing structures of the 3rd category.
4.2. Adjust the qualifications, undergo retraining (retraining).
4.3. To make a relationship with the divisions of third-party institutions and organizations to address issues within the competence of the installer of the basic frame-and-curious structures of the 3rd discharge.
4.4. Take part in the discussion of issues included in its functional duties.
4.5. Make proposals and comments on improving activities on the entrusted area of \u200b\u200bwork.
4.6. Apply to the relevant local governments or to the court for resolving disputes arising in the performance of functional duties.
4.7. Use informational materials and regulatory documents necessary to fulfill their job duties.
4.8. Certification in the prescribed manner.
5. Responsibility
The installer of the basic frame-and-wing structures of the 3rd discharge is responsible for:
5.1. Failure (improper performance) of its functional duties.
5.2. Failure to comply with orders and instructions of the President's institution.
5.3. Invalid information about the status of assigned tasks and orders, violation of the timing of their execution.
5.4. Violation of the rules of the internal labor regulation, the rules of fire safety and safety regulations established in the institution.
5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.
5.6. Declections of information that became known in connection with the performance of official duties.
For the above violations, the installer of the basic frame-and-wing structures of the 3rd discharge can be attracted in accordance with the current legislation, depending on the severity of the offense to disciplinary, material, administrative, civil and criminal liability.
This official instruction was developed in accordance with the provisions (requirements) of the Labor Code of the Russian Federation dated December 30, 2001 No. 197 of the Federal Law (TC RF) (with changes and additions), the professional standard "Installer of frame-and-shelf structures" approved by the Order of the Ministry of Labor and Social Protection of the Russian Federation of March 10, 2015 No. 150n and other regulatory and legal acts regulating labor relations.
Characteristic of work.
Installation of three-layer, multilayer partitions and multi-level suspended ceilings made of plasterboard and dry-fiber sheets on metal and wooden frames. The device of the prefab "dry" floor based on two-layer, multilayer gypsum fiber sheets or cement plates of the AquaPanenel type. Alignment of the surface and leveling of dry fridge under the floors. Installation of outdoor structures from cement plates of the AquaPanenel type on metal and wooden frames. Installation of outdoor facades like "warm wall". Installation of puzzle plates. Marking of places of installation of frame-in-wing structures using a laser instrument. Facing the surfaces of the rooms with frame-in-wing structures made of plasterboard and dry-fiber sheets on metal and wooden frames. Facing the inclined surfaces of rooms with plasterboard and gypsum fiber sheets. Facing the surfaces of mansard premises by plasterboard and gypsum fiber sheets. Installation of frame-and-wing structures of a complex geometric shape into a design position. Installation and fastening of guide and rack profiles of metal and wooden frames of a complex geometric shape. Framing of door and window openings. Performing simple work on the repair of trim, facing, floor bases.What should know:
- methods for mounting three-layer and multilayer partitions, multi-level suspended ceilings made of plasterboard and dry-fiber sheets on metal and wooden frames, exterior structures from cement plates of the AquaPaneley type on metal and wooden frames
- the order of the device of the prefab "dry" floor based on two-layer, multilayer and dry-fiber sheets or cement plates of the AquaPanenel type
- methods of facing of inclined surfaces of rooms with plasterboard and dry-fiber sheets
- rules marking places of installation of frame-in-wing structures using laser instrument
- rules for the installation of metal and wooden frames of complex geometric shape in the project position
- rules for reading work drawings
- ways to perform simple work on repairing trimming, facing, floor bases.
Order of the Ministry of Labor and Social Protection of the Russian Federation of March 10, 2015 N 150
"On approval of the professional standard" Installer frame - trim structures "
In accordance with paragraph 16 of the rules for the development, approval and application of professional standards approved by the Decree of the Government of the Russian Federation of January 22, 2013 N 23 (Meeting of the legislation of the Russian Federation, 2013, N 4, Art. 293; 2014, N 39, Art. 5266 ), I order:
Approve the attached professional standard "Installer frame - trim structures".
Registration N 36573.
Installer frame - trim structures
Professional standard
Registration number 417.
I. General information
Type of work (group of classes) | |||
OKZ code | Name | OKZ code | Name |
7129 |
Assignment to the types of economic activity | |
OKVED code | Name of the type of economic activity |
43.3 | Works building finishing. |
43.9 | Specialized construction works. |
II. Description of labor functions included in the professional standard (functional map of the work activity)
Generalized labor functions | Labor functions | ||||
The code | Name | Qualification level | Name | The code | |
Device of frame-and-wing structures (Kok) from sheet and slab materials and designs from plaster discs. | A / 01.4. | ||||
A / 02.4. | |||||
A / 03.3. | |||||
Finishing of the inner and outer surfaces of buildings and structures using construction leafy and slab materials, ready-made compositions and dry construction mixtures. | V / 01.3. | ||||
In / 02.3. | |||||
In / 03.4. | |||||
V / 04.4. | |||||
Device of frame-and-wing structures of complex geometric shape | Production of curvilinear and broken elements Kok. | C / 01.4. | |||
Installation of frames for COC complex geometric shape. | C / 02.4. | ||||
Saving frames Coke construction leaf and slab materials, curvilinear and broken elements. | C / 03.4. |
III. Characteristics of summarized labor functions
3.1. Generalized labor function
Installer of basic frame-and-wing structures of the 3rd discharge. | |
Installer designs made of plaster discsorbing plates of the 4th category. | |
Secondary vocational education, additional professional education (advanced training programs, professional retraining programs for workers' professions). | |
- | |
Other features | - |
Title of the document | The code | |
OKZ | 7129 | Builders - installers and workers related professions that have not included in other groups. |
ETKS |
§147A-147 |
|
OKPDTR | 12334 | Frame manufacturer. |
18174 |
Labor function
Labor function | Name | The code | Level (Site) Qualifications |
3.1.1. | Installation of metal and wooden frames Kok. | A / 01.4. | |
3.1.2. | Installation of construction leaf and slab materials Kok. | A / 02.4. | |
3.1.3. | Device of designs from plaster discogeneous plates. | A / 03.3. |
3.2. Generalized labor function
Possible names of posts | Installer for working with ready-made compositions and dry construction mixtures of the 4th category. |
Installer for working with ready-made compositions and dry construction mixtures of the 5th category. | |
Indicator-facing 4th category. | |
Installer on the device of dry team screeds of the 4th category. | |
Installer for repairing the COC of the 4th category. | |
Factory on repairing trimming COC 5th discharge. | |
Requirements for education and training | |
Additional professional education-advanced training program. | |
Requirements for practical work experience | The existence of professional activity experience in real production at least three months. |
Special conditions tolerance to work | The passage of compulsory preliminary (upon admission to work) and periodic medical examinations (surveys), as well as extraordinary medical examinations (surveys) in the manner prescribed by the legislation of the Russian Federation. |
Other features | - |
additional characteristics
Title of the document | The code | Name of the basic group, positions, profession or specialty |
OKZ | 7129 | Builders - installers and workers related professions that have not included in other groups. |
ETKS |
§147A-147 |
Installer frame - trim structures. |
OKPDTR | 12334 | Frame manufacturer. |
18174 | Frame collector in the production of hypsobeton panels. |
Labor function
Labor function | Name | The code | Level (Site) Qualifications |
3.2.1. | Perform finishing work using finished compositions and dry construction mixtures. | V / 01.3. | |
3.2.2. | Device of frameless facing of walls from construction leaf and slab materials. | In / 02.3. | |
3.2.3. | Installation of dry team screeds (floor bases). | In / 03.4. | |
3.2.4. | Repair of the COC, floor bases. | V / 04.4. |
3.3. Generalized labor function
Possible names of posts | Installer of frame-and-wing structures of the complex form of the 6th category. |
Requirements for education and training | Secondary vocational education. |
Additional professional programs - advanced training programs. | |
Professional retraining programs by workers professions. | |
Requirements for practical work experience | At least one year of work on the third qualifying level on the assembly of kiss-and-wing structures. |
Special conditions tolerance to work | The passage of compulsory preliminary (upon admission to work) and periodic medical examinations (surveys), as well as extraordinary medical examinations (surveys) in the manner prescribed by the legislation of the Russian Federation. |
Passing an employee of an instruction on labor protection, fire and electrical safety. |
additional characteristics
Title of the document | The code | Name of the basic group, positions, profession or specialty |
OKZ | 7129 | Builders - installers and workers related professions that have not included in other groups. |
ETKS |
§147A-147 |
Installer frame - trim structures. |
OKPDTR | 12334 | Frame manufacturer. |
18174 | Frame collector in the production of hypsobeton panels. |
Labor function
Labor function | Name | The code | Level (Site) Qualifications
4.2. Names of organizers - developers
|