Armrests for cars - how to make this "thing" convenient? How to make an armrest in your car a folding armrest in the car with your own hands

how to do LOKOVAN do it yourself? how make an armrest in machine?

Probably, every car enthusiast thought about how to highlight his car against the background of others with various parts, spoilers and other elements of tuning. How to make your own how to make a leather armrest in the car with your own hands for. Yes, perhaps these details and will give sports with your Iron horse, but it will not add comfort and power. Therefore, it is worth thinking over a more practical version of tuning, for example, an additional armrest.

Such a thing will not only hide a lot of "little things" (keys, documents, etc.), but also make the interior of the car more interesting and unique. How to remove your hands Valve Err? - Forum. And about how make an armrest in machine, Our today's article will tell.

Preparation for work

How to start the manufacture of this item? Start best with measurements and drawings of the car armrest. Before performing the work, carefully measure the distance between the seats on the front row, after which you enter the obtained data in the notebook. Based on measurements, you will get a future picture (drawing) of your armrest. Remember that this scheme is a particular importance, since it is precisely for these values \u200b\u200bthat you will manufacture the item. It is also worth considering that the distance between the seats can differ significantly even in similar brands and models of the car. Useful information on how to repair the tire with your own hands with the help of healthy tools. Each vehicle has had to face the repair of wheels and car tires. Thus, if your friend has exactly the same car (on the brand, model), then it should not be measured in it. Pump functions in car design. How to replace your own hands: Tools, nozzles, additional pump. Video Guide to Remove and Replace Brake Pads and Audi A4 B5 Discs (AUDI A4 B5) - How to repair cars with your own hands - video and articles. Be sure to calculate the distance only on your machine.

It is important to remember that in addition to the backs of the driver's and passenger seat in the car's cabin there are such important details like a hand brake lever and a seat belt. When measurements, consider these features, since otherwise the armrest will not give you the opportunity to fasten the belt normally or turn on the "handbrack". After all this, you can safely start work.

How to start the manufacture of a car armrest?

Read the same way

Everything is very simple - for work you need to take any saw tool on a tree (for example, an electric jig) and woody sheet.
The latter can be obtained from the old DSP cabinet door. It should mark all the important measurements according to the drawing and cut through the contours.

And now the assembly

A more complex process will be the assembly of the armrest. To do this, you need to mark the details and drill holes for the screws. Next in the box are made by sweat. At the final stage of the assembly, the external side of the design is polished using coarse sandpaper. But on this, our works on the manufacture of armrest do not yet end. We also have to sew the whole design with fabric overflow.

Decorative sheathing

How to shelter armrest naughty hands? Start best with the choice of material. How to make car repair repair with your own hands. Body repair with your car already. The final choice here depends on the brand and prestige of the car. For example, if you do armrest on Gazelle do it yourself, it will be the most reasonable to see his dermatitian. How to make a armrest with your own hands on the Mitsubishi car installed in the car. The same applies to domestic cars. Made armrest (VAZ 2107) It is recommended to see the cheapest material. For larger pathos and chic you can use Alcantra. How to make wick at home? Fitil for. How to install and remove the door trim in Skoda Fabia. If you decide with your own hands to replace the door trim in the Skoda Fabia car, it is better to do everything in such a sequence:. The skin is not recommended as a upholstery - it is very expensive, and besides, not every car enthusiast copes with it, sheathing armrest naughty hands.

1. Clay to do leather armrest in machine Naughty hands From plywood skin

Make armrest In the car at home. On a cardboard pattern, blanks from plywood 10mm, a frame assembly.

Armrest Naughty hands For Renault Sandero Stepway

My instagram: Cheat followers in Instagram here:

As for the color of the material, it is black armrests for most cases, black armrests fit into the interior. If you want to be original, experiment with the colors of the trim - most often in the elements of the machine interior, black and gray shades are echo.

Read the same way

The sewing process itself occurs through contours using the architecture of PVC. As a rule, this work will take no more than 20-40 minutes of time from the motorist.

Make armrest on VAZ do it yourself: Production of the lid.

The entire design of the armrest is practically ready - only the cover remained. She needs to pay special attention. Armrest It should not be tough, so it is necessary to apply foam rubber to give it softness. If this is not at hand, it is quite suitable for ordinary body sponges as an alternative. Just one armrest It will take no more than 4-5 such rocals.

So, where to get started? The first thing to the surface of the chipboard is applied glue, after which the sponges or a piece of foam rubber are placed here. After drying the adhesive of the washbasin of the washcloth, and the extra pieces are cut down with the help of stationery scissors.

In order to our armrest It was as smooth and elastic as possible, it is necessary to cut a rectangle from the subtle felt and nail it on both sides of the design.

At the next stage, felt is glued to sponges and is trimmed.

How to install hinges and furniture magnet?

In order for the lid during the ride constantly did not open, you need to keep it. This article contains a detailed photo report how to heal the steering wheel with your own hands using a screwdriver. Castle B. armrest We are unlikely to install, but a furniture magnet - just right. After installing this element, you can start the mounting of the hinges. As with your own hands you can make a puller of silent blocks, which tools for this may be required and how to save on repair, find out right now. We are fastened with self-tapping screws.

Read the same way

Further, all items pass the centering procedure, and the cover is finally screwed to the main part of the armrest. But that's not all. How to make a wick for a candle depending on which in the candlelight from the bee wax is better. To make the magnet to hold the cover, on the reverse side of the design you need to install a small metal element (plate). The search for methods and options, how to make an armrest in the car with your own hands, if it is not allowed there on a staffing schedule, occupy many motorists, whose convenient fit. We place it strictly over the magnet, otherwise no functionality will bring it. The puncture of the tubeless car tire happened. How to make the repair of beless tires with their own hands? At the final stage, sharp edges of the armrest are sharpened with a file. The same applies to the lid.

How to install the armrest do it yourself In the car?

This is perhaps the most responsible task for the motorist, because how correctly the box will be installed, the ease of use and the duration of its operation as a whole depends. The task becomes more complicated by the fact that when installing the car owner can easily spoil the parts of the cabin. How to make candles with your own hands: Detailed. It is also unacceptable to apply the so-called "collective farm tuning" inside - this will only aggravate this situation.

How to mount armrest owl hands In the car? For the very same installation of this item, you will need to have the following set of materials:

One polypropylene tube with steel inside.
Stud M8 long in 100-110 centimeters. We will need it to attach plastic in the cabin (in all the car under the decorative plug, the plastic is holding on very short bolts, so we will extend them).

That's probably all that you should buy to install the armrest in the car. By the way, to achieve reliable fastening under a decorative plug, it is recommended to drill another hole (in the total number you will have 3).

Installation steps

Cropped studs are inserted into the holes. From the reverse side of the plastic, a metal plate is placed and then the whole design is spinning with a wrench.

Next, a rectangle is peeling from the plywood board, which is then squeezed by dermatitin. It should also drill a few holes. Mount the item in place and put on polypropylene tubes. Next on the box is noted and the hole is cut off, after which it is installed in place. It follows it with reinforced washers and nuts. All at this stage the question of how to do armrest naughty hands, can be considered closed.

Read the same way

POST Views: 2

Perhaps, every car enthusiast dreams of a car, favorably different on the background of a faceless gray mass of similar models. The desire with convenience, comfort moves on its motor transport makes car owners to look for original design solutions, one of which is the armrest.
The armrest in the car is a thing, purely individual, requiring a special approach. Most accessories offered by automotive machines are standard and calculated on the large number of car brands without reference to their constructive features. For this reason, the armrest is best done independently. The exceptions are cases where the armrest is an additional option in the configuration of the car or it is possible to buy it from official dealers under a specific brand.
Consider as an example one of the armrests made with your own hands at home.
To do this, we will need: a plywood sheet, a thickness of about 1.5 cm, nails, plow joinery glue, foam rubber, leather (natural or leather).
Manufacturing process:
1. Consider the necessary dimensions in the estimated location of the armrest and make stencils. For the greatest convenience, it is best to use cardboard, due to its strength and ease of use. We try stencil. We introduce adjustments.
2. On the basis of the stencil cut the detail of the armrest. It is recommended to use the electrolovka. The resulting details are processed with a file or grinding paper.

3. Close the obtained parts or nail with small cloves. Note that when using nails on the surface of the tree, cracks and faults may occur. Therefore, it is necessary to use nails carefully. Let's time to frozen glue.

Their design, sizes and depth can be selected arbitrarily.
5. Press the skin armrest. For this, the skin is lubricated with joinery glue and gently stretch to the surface of the armrest so that the folds, bloats and air bubbles are not formed. After that, smoothed the skin hot iron - thus glue dries faster and evenly distributed over the surface, without leaving the folds and jams.

6. Increase the lid. The total length of the lid should be slightly more of the armrest long. Before covering the lid, it is best to put a piece of foam rubber.

7. Rinse the loops to the lid and to the armrest case, we produce installation in the car.

Salon of any car must be as comfortable for the driver, because some users spend a few hours without rest. Therefore, any little thing becomes an important and weighty, for example, an armrest that can reduce the voltage in the hand, remove the load from the shoulder and relax elbow. But not all cars are produced with this element in the cabin. Many car owners are trying to create armrests for cars with their own hands and even quite successfully.

What is he - the right armrest?

The idea to create an independent element for the location of one of the driver's hands is not deprived of meaning. Buy such a factory design is not the easiest undone. It is expensive, it is difficult to find a design with suitable sizes, corresponding to the design and the internal functionality that you need. Output one - to delve into the manufacture of armrests for the car and try your strength in this exciting business.

We need a "right" armrest, in the design of which all the nuances will be taken into account, its ergonomics is brought to the maximum value, and will fully correspond to the internal decoration of the car. To do this, you will need to pay attention to the following points:

the presence of a separate storage compartment of important trifles that can be easily and quickly found;
the ability to put a water bottle or a cup with tea / coffee;
the presence of a sliding and folding mechanism to impart mobility design and access to manual brakes and a safety belt latch;
the use of soft but durable materials that will ensure a comfortable and convenient arrangement of the hand.

It is such an armrest in the car we and we will do.

Stages of creating construction

There are several schemes for creating this design. Some of them are simpler and easy, and others are too complicated and incomprehensible. We tried to create such a work plan that can be mastered even inexperienced in designing a car owner, not to spend a lot of time and get a reliable product that will satisfy all the above requirements.

Remove dimensions

Here you need to show maximum attentiveness and concentration. The accuracy of measurements of distances and sizes of a place for a future armrest will affect the parameters of the finished design and its location. It is necessary to conduct these actions only in your car, because in two machines one brand there may be inconsistencies in the salons.

All data that you will have to be obtained should be recorded, it is better to make a sketch of the future product. Thus, measurements will not be confused, will be clearly, carefully and without errors are recorded. You will need to measure the following parameters:

at what distance from each other are the front chairs;
find out the distance on which the location of the driver's hand is most comfortable (sit in the car, one hand takes the steering wheel, and the second lead to a relaxed state and put in the usual position);
include the handbrake and measure the distance from it to the back of the back of the seat on the seat (the comfort of the back of the seated passengers cannot be ignored);
take into account the distance between the Safety Safety Safety Mechanism.

Spend a visual comparison of the location of the future design and its dimensions, stopping on the handbrake. Interested in the mutual location of the handbrake and armrest. If the last element goes to the territory of the handbrake, then at the size of the size of the size, the height of the brake lever rise will be measured.

Project creation

So, the measurements are recorded and tested, the time has come to creating a paper prototype of the future design. Do not be lazy and make several options that will reflect the armrest for the car in various angles. Transfer all sizes to each drawing and make sure that they are full compliance.

Now you can proceed to the markup of parts and the shallow drawing of each element, which will be a future design. Special attention is paid to the following points:

indicate the dimensions on each element, if it is figured, then we determine the radius;
we note the mounting locations, select the method of connecting one elements with others and indicate the length of the self-tapping screws, if any;
calculate the distance that remains to the edge;
for the upper part, which will serve as a support and lid at the same time, you will need to place the location of the fastening with a swivel-folding functional (you can make a sliding top, but it will be somewhat more complicated).

We are determined with the fastening method

Think over the way of fastening. Auto-shifters can be tightly planted between seats or fixed thanks to special attachments.

If you decide to stop on dense fixation, it will be necessary at the bottom of the design to prepare grooves corresponding to the details in the area of \u200b\u200bthe intended installation site. Immediately need to decide and take into account its thickness at the markup of the project.

Machine self-fastened - the task is not simple, but the result is worth your effort and spent on this time process. The elements of the armrest in its lower part must be tied to constructive elements of the internal furniture of the machine or to pre-created fasteners.

Every my own solution must first be transferred to the drawing, and only then implement. So you can avoid mistakes and inaccuracies.

Choose materials and complete the work

To create body and reference parts, you can choose any wood based material. Its thickness must be at the level of 8 mm. In the absence of roundings, you can not limit yourself in the choice of material, otherwise it is better to stop on plywood, which can be stuck under the influence of water vapor. To cut the composite elements of the design of the necessary shape under hand you need to have a hacksaw, and even better an electrolovka. For the trim, any material that will see you will be suitable. But remember that it should be resistant to wear, have a resistant color and approach the machine design.

So, the details are cut and prepared for the assembly. Make in advance patterns on paper for upholstery material. Using glue or fixing elements, we collect our homemade armrest in the car. If there were no errors not allowed, the problems will not arise.

According to the previously made patterns, cut the elements for upholstery and secure them with a furniture stapler or glue. We are engaged in a lid, which should be soft and a bit round. It will take foam rubber or ordinary sponges for washing dishes. We place the selected material, glit and cut off the unnecessary elements. Cover the felt that we carefully glue around the edges. It remains to cover the finished armrest and.

Some of this work may seem complex, impracticable and very long, but it is difficult to start just start, and then work will boil. We will not have time to come together, as the car will already stand a new armrest with a universal design and organization of the internal space. Try yourself and tell your friends how to make an armrest in the car.

The comfort of the owner of the car depends on the driver's seat. Armrests for cars are an important component of ergonomic space. When the driver's hand has a support, it helps to relax muscles and remove the increased load on the back muscles and the elbow group. Due to this, the driver's fatigue is reduced.

In addition, in the compartments of armrests, you can store different small things that may be needed on the road (water bottle, charging from the phone and so on). If the car is not equipped with armrests, then you can buy them separately. However, universal products of this type are quite expensive, therefore many prefer independent manufacture of armrests. This will require special skills or expensive materials.

Remove mercies

Production of armrest with your own hands is worth starting from the drawing. It can be found on the site manufacturer's website, but it is better to produce all measurements yourself. To do this, you will need a regular ruler. For homemade products need to be measured:

The distance between the front seats (measure the safety belt locks so that they are freely fastened).
The height on which the driver's hand is in a relaxed position and during the control of the car. To do this, you need to take a hand for the steering wheel and mark its position.
Between the back of the back of the seat and the activated manual brake (to avoid an unpleasant situation).
The size and height of the handle of the hand brake, as the armrest will be located above it.

You also need to think about whether the armrest will be equipped with an additional small compartment for the smallest elements. In the process of measurement, it is also worth considering that the armrest will be placed by the foam rubber, therefore it is worth it to take this thickness from the measurements obtained.

After that, it is worth making a drawing in different projections and, based on it, make a test version of the armrest for a car from cardboard. If the layout approached, you can proceed to further manufacture.

What materials are required

Before making the armrest, you must purchase material for its frame. DUE boards are best suitable for this, with a thickness of at least 0.8 cm, but not more than 1.5 cm. The optimal version of 0.8-1 cm, then the product will not look cumbersome and it will be easy to decide in conventional foam, without fear that the product will quickly come into disrepair.

If we talk about the trim for the armrest in the car, it all depends on the financial capabilities of the master machine and the interior of the cabin. However, if the work is performed for the first time, it is not necessary to use the skin, as there is a big risk that the car armrest will be needed. For VAZ auto, the optimal option will be velor or Alcantara (artificial suede). The material is better to acquire with a margin.

When everything is ready, you can proceed to the assembly.

Making framework

To make the armrest correctly need to transfer the drawing to the phaneer and carefully cut all the necessary items (it is best to use the logsik).

After that you need:

Pour all acute parts and irregularities. The sheathing should not go away from the first careless movement.
Mark the places where the inner partitions will be connected to the sidewalls. Basin elements are best manually by self-draws. If you use nails, the chipboard can crack.
Stripping the already assembled design again.

You also need to prepare the lid (its length should be a little more product itself). It will be attached to a small loop (loops are suitable for the doors of a small locker). But it is recommended to establish it at the final stage.

If the fitting was successful and the armrest firmly stood between the seats, you can move to the next step.

Sheaving

First you need to make the design softer. To do this, it is necessary to cut pieces of foam rubber, which will correspond to the upper parts of the armrest. Zones that are attached to the seat to cover the foam rubber not necessarily, at the bottom of the armrest comes into contact with the elements of the seat adjustment. If the foam rubber is in this place, it quickly breaks.

For upholstery it is necessary:

Loading places in which the foam rubber will be and glued it.
When the material firmly sticks, you can cover it with felt (this is optional).
Clean the design of velor or leather design. It is best to use a building stapler for this. If you use glue, then in the future there may be a question how to drag the material.
Make the same manipulations with a lid.
The interior of the armrest is covered with fur or any other material.
Install a furniture magnet. This is necessary in order for driving around the bumps, the armrest has not accidentally opened. For this, the magnet is installed on the product cover, and the metal element in the armrest itself.
Install the loop by connecting the lid and the main design. The mount is also carried out with the help of small screws.

The final stage

At this stage you need to install the prepared product directly in the machine itself. To do this, it is best to use a polypropylene tube with a steel rod and an M8 stud intended for fastening plastic elements in the machine.

After that you need:

Insert hairpins into the holes.
On the reverse side, install a metal plate and fix the wrench.
Put from plywood rectangle, shelter his dermatitin and make a couple of holes in it.
Install the item and put on the tube.
Mark on the armrest of the hole and do them.
Install the finished product between the seats and secure it with nuts.

Fastenings can be developed at their discretion. Some car owners and simply fix the armrest between the seats. If it keeps tightly, then additional manipulations may not be required. However, it is worth pressing the product several times to make sure it does not fall.

If, when using the carved armrest, the auto owner is discomfort, it is better to remove it or remake it.

The armrest is a very comfortable thing inside the car's cabin. Some company produce their cars with already installed armrests, but sometimes the owners have to search, make and install these items with their own hands. This also applies to VAZ 2110.

It does not matter, today there are many options for various armrests, which will be able to satisfy you at a price, functionality and quality.

Views

Severe two types of armrests presented on the market:

Universal. They can be installed on almost any car, since dimensions and fasteners are designed in such a way that the driver has the ability to install without unnecessary manipulations.
Model. They are manufactured by the plant and third-party firms for specific cars.

If you take into account the designs, there are also two types here:

Without a bar;
From the bar. These are structures with a lifting top, under which are located compartments for storing all sorts of smallest things.

Today we will look at several different options for armrests that can be installed on your VAZ 2110.

Chinese Universal Armander

The manufacturer is definitely not known, but there are similar designs in almost all stores of automotive accessories. The main difference is the five-way decorative hatch from above. For installation, self-mains are used, which the design is fixed on the tunnel.

The advantages of this solution include:

The presence of a bar;
The presence of a convenient cupboard;
Attractive appearance;
A wide palette of colors;
Affordable price is about 500-700 rubles.

But there are also disadvantages that many will make refuse such an option:

No access to buttons, it closes;
Quality is far from perfect. You can make much better, but alas. China is China.

Product company Delta Pro

In general, it turned out a good armrest, a little better than the previous version. But there are a number of comments. For example, if you open the lid, you can notice how it starts to walk. Therefore, problems arise with closing clarity. It is possible to buy it, but then we advise you somewhat modify the design by gluing the vibration insulating material, to improve the lid fastep.

Standard installation is carried out on the tunnel of the tunnel.

Benefits	disadvantages
There is a spacious tank	Quality does not reach the desired or even average
Attractive product appearance	Access to buttons is closed
The affordable price is up to 700 rubles	Fastening failed
____________________________________	Used thin plastic that can be damaged

Armster.

The notorious company Armaster, which specializes quite a long time on the manufacture of various armrests. In their assortment, you can meet a number of universal designs. The possibility of their installation to different models is due to the use of individual attachments for each vehicle.

The company did not bypass the model of the VAZ 2110, for the owners of this car can only be grateful.

To the strengths include:

Attractive appearance, very harmonizing with a lounge dozens;
Quality on conscience, no complaints about assembly;
There is a convenient, spacious bar;
The sheath is made of soft, attractive material;
The bar inside is soft, pleasant to the touch.

There are no minuses as such. Besides prices. It is about 2,000 rubles today. Yes, you can spend 700 rubles to dubious China, but you can pay more, but get a really good, comfortable armrest. The choice is yours.

Alamar

Alamar is becoming more popular every year and in demand. Especially among the owners of domestic cars. There are armrests, head restraints, europes, mirrors and more are present in their assortment.

If you take the statistics of buyers of armrests for VAZ, then the firm Alamar appears most often. The company has its own website where you can place an order for your taste and wallet.

Considering the models specifically for the VAZ 2110, you can make some conclusions regarding the advantages and disadvantages of these structures.

The positive parties include:

A good thoughtful design that many will appeal;
The mount is carried out directly to the driver's seat, so when moving the seat, the armrest will also move, which is convenient for the driver;
The range is presented in a wide colors palette. This makes it possible to choose a product under the color of your salon, a car;
Attractive price;
The armrest can be folded back.

As for the shortcomings, only one substantial minus can be distinguished here - the absence of a bar. So to accommodate all sorts of little things you will have to look for other places. In general, Armnotes Alamar produces a very good impression.

From priory.

If you have ever ride in the cabin of priors, the direct heir to VAZ 2114, then probably drew attention to the armrest. Pleasant appearance, good performance.

The advantages of the option with the installation on the "top ten" armrest from priors are:

The presence of a good bar;
Attractive appearance design;
Good quality, if you compare with the first options presented.

As for the minuses, here he is alone - problems with searching. Although today, the age of the Internet and online stores, it will be not so difficult to find it.

For installation, you will need to make a pair of holes for fastening bolts. Nothing difficult if the hands grow out of the right place.

Bar Console "Dozens"

There is such an armrest in the market, which is called "Console Bar for VAZ 2110". The problem is that it is pretty hard to find it.

But if you manage to find, consider what you're lucky. This is due to a wide list of advantages. Although with one amendment - is suitable for low drivers, because in practice the armrest turns out to be too low.

Now go through positive qualities. These include:

Attractive appearance of the product;
Originally thoughtful design;
The presence of a bar. Only it is immediately advised to modify by sizing inside with some material so that the contents do not thunder while driving;
Affordable price. Today it is sold about 200 rubles.

But we highlight a couple of flaws.

Problems with search. It is not easy to find, there is far from every store. We advise you search the Internet.
Low position. If your growth is from 180 cm, you can not rely on, you will not be able to lean.

For installation there is a mount of three screws. Because if you decide to install, then with a suce's longest operation. The product already includes sections with a rack for fasteners. Required fasteners are included in the kit, do not have to look for anything.

Do it yourself

Many car owners understand that indeed what they want, find it difficult to find on the market. Especially when it comes to this time and model VAZ 2110. We will be frank, now the creators of accessories are concentrated on the manufacture of products for more modern models.

If you don't like anything among the available assortment, you can go through independent creation of the desired armrest.

Making options with their own hands of such a mass. But the basic principle is as follows:

From the sheet of plywood, blanks are cut, elements of the future armrest;
Plywood segments are connected to each other with metal corners;
If plywood wet, it can be beaten and make a more original top cover;
Panels are shed;
Under the top of which the hand will fall, the foam rubber is inserted, the sheathing is performed by any material like. Suppose it may be leatherette;
Fastening elements are performed according to your car;
There is an option easier to take an old armrest and pick up the fastening elements. Actually, the case is done.

The presence of armrest in the car significantly facilitates the management process, because at the time the hand can be put on the stand, give it to relax, and not to keep them all the time on the steering wheel.

In addition, armrests with bars make it possible to place a lot of trifles that may be needed at the most unexpected moment - flashlight, batteries, matches, lighter, spark plugs, chewing gum, garage keys, etc. Bardac is not bottomless, but clogged such trifles door Maps do not really want.