Methods of interior decoration of houses from a bar. Interior trim of houses from a bar Interior decoration of the country house from a bar

The decoration of the house from the bar inside depends from time to time, the size of the house and the type of timberFrom which the structure is erected. All these factors affect the shrinkage.

Wooden black floor details are carefully treated with antiseptic. Then need a layer of waterproofing. The waterproofing layer is performed from rolled materials, rolling the strips with an outbreak. The next step is the laying between lags of the insulation floor.

Between wooden floors and walls leave a gap to the movement of the tree. Without technological clearance, the floor, expanding, will be stupid into the wall. A stress tree forms bugs, the locks will rise, disperse. Additional purpose of the technological gap - ventilation of underground space. The plinth is attached to the wall, without interfering with the tree expand and shrink when the room humidity changes.

Sheet material is used in the working area kitchens, Bathrooms, Bathroomsas the basis for ceramic tiles.

Laying tiles on a wooden base has its own characteristics:

• the base is checked on the creaking, mobility, disassembled and enhanced with any of the signs;
• the surface is ground before starting work;
• use glue with polymer additives or glue for wood tiles, improving tile adhesion with a surface.

Ceilings

The principle of the ceiling device of the house from a wooden bar coincides with the principle of the floor device. As a result, a warm and strong multi-layer cake from the sheat and insulation, laid by vapor insulation, waterproofing films, is obtained.

The ceiling insulate carefully, the main heat loss in the house go through the roof. The upper cover is performed at the construction stage of the house, called Chernov ceiling. The bottom surface of the ceiling, visible from the room, is called bearing.

Ceiling beams give the ceiling at home from a bar a non-standard original shape, give great space for fantasy. Ceiling beams usually remain visible decorative element. The beams are painted with impregnations on a tree or cubs with a variety of materials, decorating and decorating.

For ceiling design use:

• stretch ceiling, glossy, matte and patterned. The tension ceiling is not terrible shrinkage, the canvas elastic, stretched well;
• Sheets with subsequent color. LED tape will allow you to adjust the mood lighting shade;
• wooden lining, painted in light shades for color contrast with dark ceiling beams or in the same color;
• laminated panels from DVP, MDF, light and varied color, drawing;
• plastic panels For bathrooms, bathrooms, utility shops.

Stretch ceilings are not calculated for a minus temperature, applicable only in houses equipped with heating. Otherwise, the ceiling finishes at home from a bar is no different from finishing the ceiling of any other house or apartment.

note

The bay device over the ceiling beams reduces the height of the room.

Walls

The excellent wood texture of the walls from the coniferous timber does not need a finish, it looks natural. A tree is a universal material used in any style from modern to country. Wooden walls look appropriate in combination with stone and wrought elements, stainless steel and glass, organically fit into the interior design.

The non-psychic joints of the bar are closed with a decorative cord. The smooth, smooth surface is covered with colorless transparent paints or a slightly tinted, saving the texture. Water based lacquers will retain wood and pleasant coniferous flavor.

If the surface of the bar has a large amount of flaws, cracks - over the finish by any material without restrictions.

The walls of the brusade house are separated:

• plaster, smooth or embossed, with subsequent coloring or pasting wallpaper;
• plasterboard sheets with any finish finish;
• wooden clapboard, block house, timber imitation. The higher the types of wood, the less bitch.

The lining will retain the ecological style of the premises, the flaws will hide the flaws.

For fastening on the walls, nails are stuffed or screwed by a block of 40 x 40 mm with self-assembly. The bar is posted perpendicular to the shells of the trim.

The lining towards the bars is fixed, scoring in the castle at an angle of finishing nails or applying special metal fasteners, curvators.

If necessary, the insulation of or mineral wool is laid between the bars. Interesting effect of log walls creates semicircular shape block house. After mounting, the lining is painted on the design of the room.

Alight up to the ceiling also leave compensation clearance On the expansion of the tree when changing the temperature and humid regime and the possible shrinkage of the walls.

note

Frame from a bar or profile reduces the area of \u200b\u200bthe room.

Finishing with plasterboard sheets hobs electrical wiring, engineering network pipes. Plasterboard is easy to put off, bending to give a semicircular shape.

In rooms with high humidity use moisture-resistant plasterboard. Sheets durable, will withstand the weight of the tile and stone.

Stone brings interior natural beauty, comfort, harmoniously combined with a tree. The coarse texture of natural stone is unique, suitable for the selection of the fireplace area, framing door openings, indoor angles.

Artificial stone is easier, when laying the wall with a mesh does not enhance. The tiles of the right shape, the same thickness, easier fit.

Rooms decorated with artificial or natural stone brightly illuminated. The lack of light will make the interior coarse and gloomy.

Decorating houses from a bar inside in the photo

The design of the premises reflects the inner world of the inhabitants. Classic or Modern, Ecological style or country - Interior decoration of the house from the bar is limited only by the preferences of the owners.

Wood is widely used in housing construction as the main material for walls, overlap and floors. In our country, chilled horses were distributed everywhere.

A new material came to shift a new material - the Bar profiled. It is more convenient and manufactured in work. The decoration of the indoor space of the house from the bar is made at the request of its owner and is not mandatory.

Wood itself has an excellent texture and unique properties in decorating. The bar passes a preliminary and finishing processing on industrial equipment.

After grinding and applying special primers and varnishes, the surface of the material does not need any decorative coatings. However, this does not mean at all that in such houses it is impossible to make finishes to their taste.

There is a completely natural question: how to separate the house from the bar inside, and what material is better to use? Reply to it at the same time and simple, and difficult. The reason for this is that in such houses you can use almost any finishing technology.

The difficulty lies in the fact that it is necessary to ensure reliable insulation of wood from moisture. Based on this, the use of methods with plaster or putty is not recommended.

Selection of material for finishing

The pars profiled in the section represents a practically perfect square, in which the opposite sides are flat, and on the mating surfaces are made from one edge of the groove, from the other - the comb.

These elements are necessary to ensure the tightness of the joints. Straight square angles are beveled along the entire length of the bar. The connection of parts of one row in the corners of the structure is performed by means of special cuts.

Smooth sides of the bar, after their qualified laying form a practically perfect plane. It does not need some preliminary preparation and alignment. So, for example, lining, plastic sheets, MDF panels and drywall can be screwed directly to the bruus without a special frame.

Practice shows that even unqualified workers, which, in fact, is the overwhelming majority of homeowners, can perform all work independently. The inner space of the house is formed by three planes: gender, walls and ceiling.

The finish of each of these surfaces has its own characteristics. Simple observation shows that exactly the bottom plane deserves special attention.

Finishing flooring

The location of this surface is such that it needs additional hydro and thermal insulation. The construction of the house from the bar provides for the presence of a power kit, to which the draft floor from the board or plywood OSB is laid. On this surface, another carrier design is made and the decorative flooring is laid.

In the deployed form, the work program has this kind:

1. On the surface of the draft floor we laid waterproofing material. This may be: and rubberoid, and film polymer membrane;
2. Mount the power kit from a bar of a rectangular cross section of 50 × 100 mm mounted on the edge. This design has a different device depending on what is expected as an finishing coating. Under the ordinary board, the timber is installed in parallel with increments of 500 mm, and under Phaneru - squares with a side of no more than 500-600 mm;
3. Special attention should be paid to the fastening of the power set to the floor, it should be quite reliable and completely eliminating the possibility of even the minimum movement of the elements. The best tool to achieve this goal will be self-tapping screws of the appropriate size;
4. In the free space, we lake the insulation: foam, matte from mineral fiber or rolled glass cooker;

1. Cover by another layer of the steam files from the film membrane;
2. We produce flooring of a clean coating from the material selected in advance.

Useful advice: Well in the house made of natural wood, the floor of the board, laid with their own hands, is lacquered. When laying such a coating, there is a need to create dense contact between individual floorboards. It is possible to achieve it by applying wedge technology.

Finishing Ceilkov

This surface in the houses from the bar is formed by the supporting beams of overlapping and the boarding line between them. The decoration of the brusade house inside the ceilings is mainly reduced to their grinding and opening with special primers and varnishes.

In the bathroom or in the kitchen, air humidity is improved, and wood overlapping needs additional protection. The film suspended ceilings from PVC can cope with this task.

Selection of textures and colors is determined by the overall style of design of this room. The choice of films for the ceilings is huge and allows you to harmoniously enter them in almost any interior.

Tip! Before installing such a ceiling, work on the installation of waterproofing should be performed. The membrane of the polymer material is best suited. It is fixed to overlapping using rails and screws.

This will avoid the formation of condensate on a wooden surface. The price of this operation is relatively low, but the defense is reliable.

Wall decoration in a house from a profiled timber

Given the decorative properties of this material, you can generally leave everything as it is, after careful grinding and opening with protective varnish. However, in some rooms with high humidity, ceramic tiles on the walls will not look too much.

It is impossible to store it on wood, therefore it is necessary to first create the basis for it. For these purposes, there is a plasterboard moisture resistant, mounting which can be directly to the bruse or to the supporting structure from the steel profile.

There is a detailed instruction for working with this material, the repetition of which in this article is inexpedient. The second version of the decoration with the frame looks more preferable, because it will allow electrical communications to be secretly placed.

conclusions

How best to do it is described in detail above. The video in this article will help to visually demonstrate the processes described, which will allow to get a complete picture of them.

- Interior decoration of walls of a wooden house from a bar of plasterboard

In our time, the construction of wooden houses their interior decoration becomes especially popular. They are attractive to their qualities, such as environmental friendliness, aesthetics, comfort of living in a good wooden house. As an example - compare your personal feelings from finding a brick house or a tree house. I am sure that
The second option will choose the absolute majority. But when building a house from a tree, some factors should be taken into account on which the durability of the structure and the convenience of your stay in it. And now we will consider in more detail, a rather important question is the interior decoration of a wooden house.

1) Features of the interior decoration of the walls of a wooden house from a bar

To start the interior decoration of the walls of a wooden house from a bar only follows after a more detailed study of technology, methods and their advantages. It is very important that the materials of the interior finish passed the air. In a wooden house, this should be taken into account not only when interior decoration, but also in the outer one. If finishing
The materials of the sheat will not pass the air, in the rooms of the house there will be an elementary effect of the greenhouse. To avoid this and provide a normal microclimate in the house, you will need to make additionally forced ventilation. This will require additional cash costs and an increase in building and finishing work.
The second important point in the device internal decoration of a wooden house - use light finishing materials. This will help avoid additional load on the walls and foundation.

2) When you can start the inner decoration of the walls of a wooden house

The decoration of a wooden house can be started only after the final active shrinkage of the wooden log cabin. Be sure to take into account the material from which house is built. A more accurate ending shrinkage will depend on the average air temperature, humidity and climatic features of the area.
Final shrinkage of walls from:
- glued bar - after 3-4 months
- ordinary timber or brica - after 1 year

It is possible to start the finish of the inner walls only after their complete cacopa.
The canopate walls are performed by two stages:
- The first caisp of the walls of the house should be made 4-6 weeks after the assembly of all
walls.
- The second time canopate walls in 5-8 months.
For the cacopa of the walls, it is necessary to prepare the heat insulating, sealing material. Usually use pass or jute. Starting the pant of the walls of a wooden house, it is necessary to do it at the same time from the inside and from the outside of the walls. Having finished the insulation with a pantry on the one hand, immediately need to move to another, it is necessary to do this immediately to avoid possible skewing of the walls.

When all work on insulation work is finished and the walls are cocoon on both sides, then the building itself is raised by several centimeters. After some time - up to two weeks, the height will become the same and the material of the cacopa is condensed. It provides a dense, complete fit of the material of the cacopa to brothers, increasing this thermal insulation of the house and necessarily preventing drafts.

After a complete shrinkage of the walls, after the caulk, for good isolation, you can walk the sealant along all the seams on top of the cacopa.

3) Preparation of walls before finishing

Before starting the inner decoration of a wooden house, look at how the walls are folded. If everything is done carefully, the insulation does not stick out of the joints, then it is possible that the walls are not needed in any premises. And it will be better to avoid cash costs to apply high-quality paintwork products, while retaining a kind of color in the interior of a wooden house.

4) Interior decoration of the walls of a wooden house from a bar: Options

It is best for finishing wooden walls inside the house suitable:
- decoration of walls with lining (various colors and forms)
- finishing with wall panels
- wall covering plasterboard
Under all listed materials it will be necessary to make a frame over the entire surface of the walls. Make the base, frame, better from the tree. Casting walls on the frame has such advantages:
- There is no need to level the surface
- creation of a gap for air circulation (this is very important for the house of wood)
- It gives the possibility of laying additional thermal insulation.
When performing the interior decoration of a wooden house, it is important to leave the gap between the ceiling. It will be necessary, given the various deformations and a possible microfer. The width of the gap is from 2 to 4 cm, it can be closed with decorative ceiling plinth.

- Interior decoration of wooden house walls

When finishing walls with clapboard, it is possible to use a material from various wood species, various types of lining. Share the lining on the transverse profile.

Fasten the lining in several ways:
- on beammers
- on self-tapping screw or nails at an angle
- on nails in the ramp (not very practical due to aesthetic considerations)
The first two ways to attach rather labor crews. Mounts are naked so as not to damage the facial surface of the lining. With the internal decoration of the walls, the construction stapler with brackets also use, using braces with a narrow back and long legs. All used elements for fastening should be made of stainless steel.
Lining made of wood, as well as wooden walls allows shrinkage. To avoid this, apply the chamber drying material.

- Interior decoration of wooden house wall with wall panels

Very good finishing option and a great opportunity to diversify the interior and create your personal and unique indoor view. It is very widely used by designers, for additional opportunities in the design of residential premises.

The interior decoration of a wooden house from a bar with wall panels is a different type:
- plastic
- Wooden
- MDF.
- Bamboo
- leather
When fastening the panels themselves, you need to follow the manufacturer's recommendations. Facing fits on the penetration of the walls of the walls. Depending on the panel material, the attachment methods are quite diverse, so before purchasing the selected material, it should be familiar with its features.

– internal finish wall Wooden at home of bruus Plasterboard

Application for trimming of drywall is a fairly common phenomenon. Pretty lightweight material, simple installation of the panels themselves and quite affordable to the common consumer price. Choosing plasterboard walls for interior decoration, follow the following recommendations:
- Plasterboard material is not durable and can be easily damaged. Finish
Plasterton is recommended to apply no earlier than 1.5-2 years after
Buildings at home.
- It is necessary to strictly follow and not allow wetting material or high humidity.
- If the trim of the walls of the plasterboard do immediately after construction, then
Fix the sheets on the floating frame, then the decoration and the base at shrinkage will be
Move separately and it will not allow surface damage.
- to prevent the disclosure of the joints or cracks on problem areas, it is necessary
It will sink them with a reinforcing grid of polymeric material.

When making a frame for fastening sheets, it is recommended to use rails and bars from a tree. The use of a metal profile will require a waterproofing device - the rules for using different materials with different humidity properties and characteristics require a waterproofing device.

In what cases the external covering house from the bar is really needed. It is known that wood even durable, including glued bar, is subject to rotting processes, can swell under the vision of rainy weather conditions, can negatively respond to aggressive environmental impact. Save walls will help the walls of the walls.

Why is it necessary?

The house from the bar is aged, who has lost its original beauty or new, recently erected, requires outdoor protection. Not to mention that after the cladding, its appearance will significantly improve. The tree requires constant attention, every 4-5 years (deadline) is required to handle its protective equipment, maintaining wood health, invest money, spend time. The sheath will save money and strength you need to do it without postponing.

Important! Sewing a brusade house follows after 2-3 years of shrinkage, the exception is the glued bar, which practically does not change its forms.

However, only competent lining at home will be its protection. The main advantage of the wood is its ability to breathe. Proper finish is to maintain the strength of the bar, creating a microclimate of wood-friendly wood.

The wooden structure is needed, first of all, to protect against moisture. Increased moisture creates conditions for the formation of fungal formations, mold. The processes of rotting are capable of turning the tree into the root in a short time. The level of moisture of the walls after shrinkage is 10-12%, the development of fungal colonies occurs when its level reaches 22%. The walls swell from oblique rains, fogs, during the snowmast, wood, as the pump pulls moisture and transmits it to interventory insulation. Parachi saturation occurs from the inside of the house.

Wall protection - ventilation, vaporizolation. The use of diffusion membranes, with a plurality of micro-rocker, windproof, repulsive drops of moisture and vapor insulation, non-transmitting water vapor films - be sure to correctly cover the walls.

Important! It is impossible to use polyethylene, biting the design tightly, not allowing to breathe wood. The use of ordinary spanbond, megazoles and other vapor insulation membranes is preferable, by the way, they are not much more expensive.

Mandatory is a device of ventilation gaps in any form of finishes that contribute to the output of moisture, free air circulation.

To improve the framework, on which the finishing material is mounted, you should use a wooden timing with a cross section of 4x5, 5x5. To create the recommended value of the ventilation gap in 4-5 cm, you should use the counter rail from the same timber. The ventilated facade suggests the presence of holes covered with lattices that provide free air intake.

Important! The use of a metal profile is not recommended. Metal freezes, when thawing there is a condensation that fills the inner space of moisture.

As a heater is preferable to flax or jute. Mats from these materials are not cheap, but their use justifies completely. Mineral wool eventually seek, artificial polymeric materials, not breathing, are not too useful for health, natural insulation serve for a long time, protect reliably.

What properties should the materials be posted?

Many materials are a lot of materials. But those who have important characteristics for this purpose are necessary:

• low thermal conductivity;
• high fire resistance;
• biological stability;
• inertia to chemical environments;
• air permeability.

This is worth adding the simplicity of installation and low cost. Aesthetic advantages of materials I have not recently.

For the facing of a brusade house, the construction market offers different options today, only some of them are considered. It:

• block house;
• professional flooring;
• siding;
• brick;
• thermopanels.

These materials have undoubted advantages, have drawbacks. Everyone has different costs and operational parameters. Each type of finish can be used for a brusade house, from the point of view of preserving walls, their protection.

Benefits Block - House begin with appearance attractiveness. This is especially valuable for those who would like to preserve the appearance of a wooden structure. Block House by manufacturing method:

1. wooden;
2. metallic;
3. vinyl.

The first is made of natural wood, by treating the "square in a circle", spill the external semicircle logs, soaked with special compositions, are segged, excluding any deformation. The disadvantages include the weight of the finish, creating a serious load on the foundation and carrying walls, which should be considered when finishing the old houses, as a rule that do not have foundations.

Metal block - House imitates the tree, is steel or aluminum. The explicit plus of the material is durability, resistance to wear, inertia to the solar rays, biochemical aggression. Modern manufacturers offer a variety of colors, sophistication of textures, the buyer is provided with a decent choice.

The vinyl block is manufactured from PVC, its advantages are durability, light weight, resistance to temperature differences. The disadvantages should include the fragility of the material, especially in conditions of severe frosts. Aesthetic data is acceptable.

Installation Block - House is produced on a wooden frame, installed on a pre-prepared and trimmed by membrane film wall.

Important! The timber used for the frame requires additional processing by antiseptics and antipirens. The residual moisture of the bar should not exceed 12%. If the weight of one stick is noting - you need to dry.

The pitch of the clamp 50-60cm, the counter mustache makes the same cross section or 30x40mm from the bar, are installed on the windproof layer. Installation of panels Block - House starts upwards. Follow the horizontal installation. The lower part of the building (minimum of 30cm from the Earth) is trimmed with a stone or base panels.

Block - House is equipped with comfortable lock connections, mount panels to the crate can be klyaimers, self-drawing, galvanized nails.

The main advantage of the professional flooring is its price. Just like all the materials considered in the article, it is easy to install, and therefore is popular with those who do it with their own hands. In addition, professional flooring is durable, has good performance, low weight, not particularly increasing the load on the bearing walls and the foundation.

Manufacturers offer monophonic sheets or with a pattern that imitates the tree. Sheets are produced thick from 0.8 mm to 1mm, the height of the corrugation ranges from 8mm to 35mm, the sheet width is also different from 1076x1035 to 1200x1150 mm.

What is a facetl, this is a steel corrugated sheet with an external coating, the front desk connects two types:

1. zinc;
2. polymer.

Quite often used coverage - galvanized. It is applied in the process of rolled sheet by hot application. The use of such a professional sheet is unlikely to decorate the house, dull colors, boring grayness even for the fence is not suitable, in addition, with time, the material becomes vulnerable to corrosion, the only advantage is low cost.

Tip! It is better to use a polymer coating straightener, its cost is not much different from sheets with galvanized, but the benefits are much higher.

The combined coating of zinc with aluminum eliminates these flaws. Professional finish acquires quite decent technical characteristics, resistance to biochemical exposure, abrasion, anti-corrosion properties. Polymer coatings with similar chemical and technical indicators look more attractive. Polymers are applied on top of galvanized. Plasticize the layer in 175 microns protects against ultraviolet, polyester adds gloss with surfaces, the Purally significantly improves the strength of the sheet and its appearance.

We are trimmed by a straightened surface of the walls on the principle of the ventilated facade. If necessary, lay a layer of insulation, mandatory vapor barrier and windproof. Mounting can be mounted on a frame of a wooden bar or metal profile.

Profile step 60cm. First install brackets with self-leveling function on the self-tapping screw. Installation is made on one vertical. P-shaped vertical profiles are put on the brackets. Then fasten the insulation, vaporizolation. Then the professional sheet is mounted. Fasten with screws with hats and washers.

Important! A compensation gap needed to extend the material under the influence of heat should remain between the Hat and Proflist. Dogs are installed at the joints to hide them.

The mounting on the ram is similar, only instead of P-shaped profiles set the bars set on the edge.

The base of large sizes in principle is not needed, but its presence is important in terms of the aesthetic perfection of the facade.

Siding clamping

Refers to the most popular types of facade. The material is relatively not expensive, possesses all the necessary technical and operational advantages. Suffice to say that it serves such a finish up to 50 years. Houses are covered with siding look attractive, neatly.

Initially, it makes the mandatory preparation of the walls, extract unnecessary parts, remove lights, lowers, window sills, remove nails. Gaps and cracks are poured with sealants. The timber is treated with antiseptics, impregnation with protective properties that extend the life of wood.

Tip! It is better to use silicone sealants, with solidification, they areolating the cracks from moisture, fasten them, enhancing the sparesiness of the tree.

For a frame, it is preferable to use the 40x40, 40x50mm reached by an antiseptic from rotting and microorganisms. When installing, you need to monitor the lines so that the surface of the siding is perfect, use the level.

The insulation is laid between the cutting racks, the vapor insulation membrane film is mounted on top. Then set the crate to obtain a ventilated facade. The bar for her can be smaller than 30x40mm.

Siding installation starts from the starting panel. All subsequent planks are installed with a gap for thermal expansion. Corners are equipped with special elements, as well as separate details will be needed for the framework of window and doorways. Manufacturers believe that for montage of siding, sufficiently castle compounds that are equipped with all the planks, however, the practice shows that additional fixation does not prevent self-drawing.

Side selection is great. Excellent properties, hygroscopicity, inertia to biochemical exposure, durability, plastic siding is distinguished. Its price is quite accessible to average income. The disadvantage is fragility, especially in frost, the average resistance to burning. Metal siding is distinguished by increased wear resistance, does not fade into the sun in contrast to the plastic. Durability and ability to maintain a primordial look - its special advantages. Disadvantages - higher price, high weight. Wooden siding does not use special demand. Such protection requires constant care, antiseptic machining, protect the tree by wood is not reasonable. Joke Trim Toculation There is a special siding - base.

Finishing brick

The lining of the brick is the construction of a considerable weight barrier. Planning such a facing follows in the design stage. In addition, a competently equipped ventilation system is required to release a bar from excessive humidity. It is advisable to use brick facing only if the house is laid out from the bar with a cross section of 150x150, saving on the walls of the walls, you will have to spend money on additional insulation so that the family has not ruined the family budget.

The foundation should be wide so that the area of \u200b\u200bthe sole withstand the total loads. Ventilation gap with a width of at least 50mm to the width of the insulation layer. Ventilation holes are required, equipped with lattices in the second row of masonry every 10 meters.

Fasten the brick to the brusade wall with the help of ties - metal elements, one of which is lit into the seam of the masonry, and the second is clogged into the bar. On 1m in the length of the brick 5 connections, in the height of the communication, they are mounted for each 5th row.

Important! Facing bricks only after a complete shrinkage.

The house after the trim looks presentable, solid. Its operational characteristics are rising.

Facing a house of a bar of thermopanels

New technologies are gradually entering our lives. The sheathing of thermopanels is not only at times improves the characteristics of the house, it radically changes the appearance of the structure, turning it into a fabulous terme.

The material replaces the brick, stone, does not require insulation, the multi-layer porous structure reliably protects the walls from moisture, frost, and other environmental impact. Parosolation and windproof is not required, everything is provided in the structure of the panels. To establish thermopanels and forget for many years about the problems of the facade, paying, however, decent money for the material is a reasonable decision.

Installation can be cleaned with a wet method (thermopanels are glued to the surface of the wall), can be installed. The mount is produced by tight docking of the panels among themselves, fixing self-draws.

The choice of material for the cover of the house from siding is diverse. What is better for you - decide!

The interior decoration of the wooden house is a rather time consuming process, and depending on the goals set, it will require you from certain material costs.

The volume and nature of finishing works will largely depend on a number of factors, such as:
House new or it is an old building
The material of the walls of your home is made of a rounded log or glued bar,
One or two floors in the house.

Proper preparation for finishing: materials and tools

Before proceeding with the interior decoration of the premises, it is necessary to think about the work plan well, that is, to accurately calculate the amount of material and its approximate cost, so that in the future it did not have to redo and carry extra costs.
The most important element of the interior is the walls, as they occupy the largest area of \u200b\u200bthe house and their decoration pay attention in the first place.
If the new and just built, then the decoration of walls from wood will require mainly high-quality processing, and it is worth producing it in the following sequence:
1. Initially, the surface of wooden walls must be cleaned by sandpaper, removing all small scratches and small contamination. Emery paper No. 1 will cost $ 280 per meter square or from 100% for a petal emery circle for a regular drill.
2. Be sure to treat the wooden surface with an antiseptic agent at the rate of 200 ml per square meter, while the cost of a standard canister in 5l you take offense only at $ 350.
3. Further, they stick through all the chips, scratches and cracks to give the pristine tree tree. Here it is necessary to apply only a special putty for work on a tree, which is released in the colors of the invoice of any tree and simply need to be chosen into the tone of your texture. At a cost of putty from $ 250 per kilogram you will need not very much.
4. If necessary, we produce tinting of wooden walls, as in the photo. To do this, get tinting oils or solutions. It will cost you from $ 3 per kilogram of simple wood oil or 7,50₽ for toners with special wax additives and various fixers. The consumption of tinting oils will be about 250-300 grams for a coating for two passages. Let the price do not scare yourself - it is worth it. As a result of a simple ordinary pine, you can get walls from expensive and rare wood species, for example, complete imitation for antique pine, light or dark oak, dark tick, or even a red tree.

5. In conclusion, we apply a protective lacquer, which at 250 g / m2 consumption for two passages will cost an average of 500.00 per kilogram of high-quality varnish. If you have not been tedoving, you can buy a wood lacquer with a light tint, which will allow you to correct the texture of the existing tree without unnecessary costs.
For the production of the interior decoration of the walls of the new wooden house from the profiled bar, you will need a minimum of tools:
spatulas
emery paper number 1
painting rollers,
Pilented brushes in size of 1-2 inches,
rag
solvent.
As a result, the finishing of the inner walls in the house with a total area of \u200b\u200b100 m2 will cost you about 40 000₽, and with a toning of $ 60,000, which is not very expensive - only 300₽ for the meter of the surface.

Features of the interior decoration of the wooden house from the bar

If the house stood not one year, the interior decoration will be submitted by part of the repair work and will require several large labor costs and considerable expenses than in a new house.
Since the main disadvantage of the wooden walls are shrinkage and drying, as a result of which cracks and cracks appear that need to be chopped.
For the sealing of large cracks, it is best to use specialized acrylic sealants that are designed for wood work, which will allow you to make the cracking of the crack at one time with the surface of the wall, as in the photo. The tone of the sealant should be selected according to the color of wood, so as not to have additional costs. The price of a capacity of 25 kg of liquid sealant begins from $ 8500 and it will be enough for 140 meters of shallow seam, which will increase the total cost of working on a 60% meter.
After processing large cracks and cracks, we produce further finish, for any other wooden design:
shit
we clean
toniruem
Varnish.
But unlike the new house, you will have to spend more time and forces for grinding in order to achieve an ideal result.
If it still does not help hide the basic defects of the aging of wood, then the walls instead of varnishing can be painted with alkyd paints, and this method of finishing will not be so demanding to prepare the surface of the walls and significantly reduce, first of all, common labor costs.

In the case when the walls of the country house from a bar for some reason cannot be returned to the "life" with light cosmetic actions, then their surface should be covered with a completely new material.
The most accessible and frequently used are:
lining
block house,
Plasterboard.
The most inexpensive wall-cutting walls for interior decoration is distillation, and the effect of a new home can be achieved if you use a board with a timber imitation. Depending on the profile and variety of wood, the cost of lining ranges from $ 150 to $ 25 per square meter of finished product. It should be borne in mind that it is quite easily mounted and does not require special costs of preliminary surface preparation.

Alteration of the old house: an extension from different wall materials

Blockchaus is somewhat more expensive than simple lining, but at the same time almost completely repeats the wall of the rounded house. Keep in mind that as a finishing material, the blockhaus is more complex in installation and requires certain skills and experience when working with it. It, as well as the lining mounted on any wooden wall without special training. Prices for block chas start with 350.00 / m2.
Plasterboard, as material for wall decoration costs only 50.00 / m2 and has no restrictions for use in wooden houses. But it requires additionally creating a carrier frame, as well as a preparatory putty and finishing painting, which increases its final surface cost up to 1000.00 / m2.

Popular projects on our site

Typical Contractor Errors when interior decoration of a bar

The largest feature of wooden houses is that throughout its entire period of existence, they are as it were "alive" and depending on the time and environmental conditions, one way or another, are able to deform.
So, the new house from the bar is able to give a thorough shrinkage in the first year after the construction. The poorly dry bar can not only shrink across the trunk, under the action of the weight of the whole design, but can also be significantly deformed along its axis, making the work of the interior decoration of the premises is very short-lived or to demand special additional work when conducting them.
It is believed that the house made of wooden materials in ages of 5 years or more, allows for the use of non-deformable materials for its interior decoration, such as plasterboard and ceramic tiles.
It is extremely recommended to use for houses from a bar with internal wall decoration, so-called wet work, for example, plastering walls, as it is fraught with the occurrence of the cracks on the surface of the crack.