Vistak in the corner for the garage with your own hands. Vistak in the garage: varieties of structures and their features. Lighting the workplace

The garage is first needed to store the car. However, experienced, competent drivers use the room for technical inspection, repair work, car maintenance. And they know how to not only pour oil, but even to do and some kind of work quite complicated from a technical point of view, repairing their favorite cars. As a result, the garage turns from a simple repository to the real workshop. And here you should have all the equipment you need. The workbench in the garage in this case is simply necessary.

What is so useful workbench, what is it? The fact is that the workbench is a special desktop with a multitude of functions. On it can be effectively engaged in electromechanical, assembly and plumbing work. An excellent suits such a table for processing all sorts of materials. At the same time, each willing if it is responsible for the task, it will be able to make a reliable workbench in the garage with your own hands.

Let's get acquainted with the workbench closer. It is often customary to compare with a writing desk. It expands the possibilities of man as much as possible, because it provides an excellent opportunity to effectively use a solid surface for work. In this case, there is a sufficient number of sections to store the necessary items, tools and parts. It is such a real workbench, supplemented by numerous shelves and boxes, is most effective, convenient for work in the garage.

We list the basic structural elements of the workbench.

• Frame with legs is a carriage. It is she becomes the base on which all steel details are already fixed.
• The countertop must wash powerful, thick and durable. It will have to withstand the most serious mechanical loads, for example, hammer blows. Taken to make a tabletop from a thick wooden board or metal.
• The bedside tables usually have at the edges. Excellent when there are many drawers, shelves. In such sections, it is convenient to store the necessary details, compact spare parts, small tools.
• Additional shelf usually takes place directly under the table top. There are the logical to place those objects, tools, parts that are more often used directly during work on the workbench. They will be very convenient to take: everything you need will be in the free access zone.

Pay attention to an important point. When you put the table in the garage, you must take care of the level of illumination. Think over advance alternative lighting of the working area. For example, you can use different types of lighting devices. At the ceiling to install an additional light source, and to the wall or table to attach a rotary lamp with a directional beam of light. For more efficient work, as well as safety compliance with good lighting is necessary.

Types of workshops

Before installing a specific workbench in the garage, it is worth understanding which kinds of such desktops are. It is customary to divide the workbench on the plumbing and workers.

The joiner's workbench has a wooden countertop. Frame can be made of wood, metal. Of course, a wooden tabletop, whatever thick it is, is still very vulnerable. Work on such a workbench with metal items is inconvenient. The surface of the wood countertop is damaged by a metal chips, it is difficult to remove numerous traces of the machine oil. Unfortunately, the service life of such workbackers is small.

A larger workbench in the garage is suitable. It is he who attracts reliability, durability, increased resistance to wear and versatility. The main secret is a durable metal countertop. It can be comfortable to work with details from any materials, in particular, from metal. On cleaner workbenches, they grind and cut, accurate and saw. The advantage of the workbench also in its sustainability, because when working with metal details on the tabletop sometimes it turns out a large pressure. The tools are better stored on the shelves, drawers of the workbench.

Materials: Tree and Metal Competition

Want to make a workbench in the garage yourself? Then you will need to choose the main material: such tables are made of metal and wood. As a result, ready-made structures are distinguished by the level of reliability, stability. Of course, the metal workbench is more functional, steady, durable.

We will pay attention to the main features of workbenks from different materials.

• In the process of making a workbench, it is easier to work, of course, with a tree. It is enough to stock up with hammer, jigsaws, screwdrivers and a grinder or hacksaw to make a wooden workbench quickly enough.
• Metallic working table is noticeably more complicated because you need to be able to process metal, as well as carry out welding. It is quite difficult to work with iron blanks. It is advisable to have at least minimal skills. In addition, special equipment will also need.
• When experts compare metal and wooden workbenches, they note: the wooden table is less durable, but the metal is too heavy, not as convenient during operation.
• Optimal solution - Combined workbenches. You can make a wooden countertop, and then further cover it with a metal layer. And then you can safely work with the metal, use vice.

You want to have your own workbench in the garage, you wish to make it personally, but are not going to use too often? Then it will be an optimal option for a traditional wooden desktop. Just make a tabletop thicker, reliable. It is very important to provide resistance to mechanical loads.

Preparatory process

We find out how to make a workbench in the garage with your own hands. First you need to prepare for work. First of all, determine the optimal design, size and form of your future workbench. Suppose sometimes the optimal version becomes the placement of the workbench in the corner of the garage. This will allow rationally to use the space and create a comfortable working area.

• Choosing a place to install the workbench is one of the most important tasks. The level of illumination is of great importance. Think what natural light will be. The best option is when the light falls straight or on the left side. When it comes to artificial lighting, it is necessary to organize everything competently. It is advisable to make the upper light, as well as install an additional source of directional lighting of the working area.
• Performance of work on the workbench, the level of comfort largely depend on the height of the table top. We must calculate the optimal height in advance. Just stand straight and arms bend in the elbows. Imagine that you are relying on the workbench. This is the distance between your hands and the floor and is the optimal height of the workbench.
• You don't need a width too big. Excellent if a person can freely reach the opposite edge of the table top. Good size - 50 cm in width. Length can be done much more. The longer the table, the more details and large-sized tools on it can be decomposed.

A good solution is to equip the workbench with the necessary tools. For example, fasten the jigsaw on the table top, circular saw.

We select tools, materials

Immediately clarify the list of materials and tools. For work, you need a drill and a welding machine, a roulette and a level, a bulgarian with an electric jigsaw. Be sure to store the following materials.

• Steel strip and corner. Thickness should be 4 mm.
• Anchor bolts, screws and screws.
• Square tube with a thickness of 2 mm.
• Steel sheet to make holders for drawers and countertop. The optimal thickness is 2 mm.
• We need guides for boxes.
• For the table top you need to take a massive wooden board with a thickness of 50 mm.
• The walls of the boxes, the tables are made of plywood with a thickness of 15 mm.
• For registration and increasing operational properties, paint is also needed by wood, metal.

If you make a workbench from these materials, it will be very durable, durable and stable, convenient to operate.

Collect your hand brazed workbench

Consider an algorithm for making a brazing workbench.

1. First take four supports. They are made from the steel corner. The legs fasten with top welding.
2. We need hard ribs. At a distance of 12-15 cm from the floor level, you need to privar small fragments of the corner.
3. To secure the boxes, the shelves weld additional racks.
4. Then comes the time of manufacturing table top. You can take oak boards. They must be tightly fixed on the frame. The best option is to do in advance along the perimeter of the carcass hole for bolts.
5. Boards also need to drill. In holes should be good bolts.
6. Already secured the lid? Now it's time to sow a metal. It is advisable to use galvanized iron. It is fixed with self-draws.
7. Metal edges Process with a file.
8. Separately make shelves, countertops.
9. Collect all the workbench completely.
10. At the final stage, wooden elements need to be treated with special compositions to prevent the formation of fungus and mold, as well as antipirens. You can optionally place the desktop using.

When you want the workbench to stand as securely as possible, you can attach it to the floor, welding metal corners to the legs.

If you will suit the maximum responsibly to the task, you will comply with the technology and use useful advice, your workbench will not yield to the finished desktop desks from the store.

Video: Learning the process of making a workbench in the garage

Want to clearly consider all key points, the algorithm of work in the manufacture of the garage workbenches? Now you have a great opportunity to see all useful information on video.

Here you just feel the direct member of the events! It will be possible to estimate the complexity, work order. The rollers focus on all the most essential nuances. After viewing, if you reaches the case responsibly, you are quite able to install such a functional desktop in the garage with your own hands.

Good luck to you! Have a reliable, efficient workbench in the garage. The work with him will turn into pleasure.

Today's our review for men of masters or car enthusiasts. It will be about organizing the main workplace in the garage or a workshop - a convenient and functional workbench, which has sufficient strength and all necessary devices.

What do we want from the workbench

For most garage - not just the place of storage of the car, and the most real workshop. Unlike the workplace in the apartment, in the garage there is work with massive and bulky details, often dirty. It is also fairly often to bend and edit metal, use electric arc welding, reliably clamp the part with clamps or in the vice.

The main requirements that should be made to the garage workbench are massiveness, strength, resistance to pollution, surface stability to heat and shocks. In addition, the workbench must be compact and, if possible, as much material consumption as possible.

It is desirable that the workbench had a simple assembly scheme, implying easy dismantling. The workbench should not be largely dependent on the surrounding capital structures, for example, to fit and concrete legs to the floor is not recommended.

Basis of workbench: frame and legs

At first, you need to collect the lightweight frame - the basis under the tabletop. It is four corners of 40x40 mm or 50x50 mm facing internal regiments to each other. You can split short segments of welding ancake: a special structural strength from the frame is not required, but an arbitrary number of jumpers is desirable to add. The length of the table top can be any, even though in the whole wall, and the width is such that to the corner of the wall you can easily reach your hands. In the upper part of the frame forming the inner cavity, it will be subsequently gaining an array of the table top, and the external shelves will serve as a plane of the support on the underlying elements.

If there is an acute question of lack of space in the garage, it needs to be addressed immediately. The best wall for the placement of the workbench is the one that is directly opposite the gate. It is easiest to roll the car on a halfway back, so there will be a lot of space for work and free passes on both sides. Therefore, on the end wall you feed the corner of the outer shelf upwards, the level is 50-60 mm below the desired height of the working surface. The height of the workbench is individual for everyone, but usually 100 cm is deducted from human growth.

If the workbench from the angle to the angle, then on the adjacent walls, also navigate the corner length in the depth of the tabletop or a little less. The mounting to the wall is performed by anchor bolts and quite often, it is desirable to each masonry element, that is, after 20-25 cm. Optimally, if each meter is welded by 30-40 cm to a downward and attached anchor.

Place the framework on the reference corner, then proceed to install the supports. It is advisable to make them oblique that the lower ends of the legs rested into the angle between the floor and the wall. In this place, a lining from a cut of angular steel is installed. In the upper part, the leg is joined with a frame of 50-80 mm from the edge, but not directly, but is welded to the plate, which is then fastened with bolts. The slanting legs will save more space for the entrance of a passenger car.

Adjust the table on the level is very simple. The longitudinal plane is set to the corner mounted on the wall. To get rid of the rod of the table, you just need to push the oblique leg a little deeper, slightly pushing the cutting angle with a grinder. After the manufacture of all the mounting elements in them drilled holes:

• to fasten the frame with a corner under the M12 bolt every 50 cm;
• for fastening the frame with legs - under the M10 bolt, four pieces per plate.

What should a tabletop

Before assembling the countertops, you need to make all the elements of the base with bolts, inserting them from top to bottom. The tightening is performed final, the caps will subsequently drown in the table top array.

The main filler for the countertop is solid wood or chipboard sheets. The first preferable in terms of the massiveness and ability of the wood array is good to extinguish the vibration of the strike. The thickness of the board should be such that when laying into the frame, its plane performed quite a bit above the corners. The perfect option is to use the boards of the same thickness as the outer size of the corner. At the same time, each plate before the set should be brought to the plane to perform only 1-1.5 mm.

When the tabletop set, the direction of the sheet - across the length of the workbench. The boarding shield must be tightly allocated, for this, a small bar is temporarily screwed to the last attached board, for which a new plate is pressed by a church clamp. Boards are attached from below through the corner of the frame, along the pair of self-tapping for each side.

If there are bolt hats on the way, try on the board and knock on it with a hammer so that the caps are left dents, and then select the grooves with a large drill and a chisel or a feathery drill. Do not forget to shoot a chamfer on the ends of the boards, because the corners have a rounded pairing between the inner shelves. When all the boards are typed, the surface must be aligned with a grinding machine, draining the wood to the level.

After the set of boards, deal with the surface coating. It is optimal for this, a hot-rolled sheet with a thickness of 2.5-3 mm: such a workbench can be used as a welding table, edit tin on it, shed any liquid. The heat resistance is provided by a magnesite sheet or asbestos cloth, which is placed on top of the boards. In this case, the thickness of the sawn timber should be less than the usual. The subclass can perform over a frame by 1-2 mm, after the upholstery of the metal it will not be a problem.

Metal needs to be laid with an indent from the rear wall of 10-15 mm, you can temporarily fix a small wooden bar. After that, the edge of the sheet is pressed with clamps and is recovered down evenly along the entire length. Rib Corner will provide a beautiful straight corner.

After the bend, the remote bar is removed by the wall, and the sheet is pulled out a bit on itself, the board will start under it and the holes of 7-8 mm are drilled in 50 cm. Through them, there are places in the corner of the frame, in which the openings of 5 mm are drilled and the thread M6 is cut. The sheet is attracted to the frame with a bolt with a semicircular hat, here the fixation is needed for high-quality metal sowing. After recording the bottom angle, perform the leaf mount from below by analogy with the end of the table top, but now you need to make cutting under the legs and secure in a checkerboard with end bolts.

Installation of tabletop installation in the corner of the wall of the corner of 25x25 mm on the Plinth manner is completed. Through the holes every 25-30 cm, it is attracted to the wood of the countertops with self-drawers, and then attached to the wall anchor bolts after 50-70 cm. If you want to cover less rust, remove the sheet before fastening it to the end, warm the soldering lamp and soda Cotton rags, abundantly moistened in spent mineral oil.

Boxes, doors and all for storage

When the base of the workbench is ready, you will easily complement it with the necessary niches, shelves and other places-equipped places. In the lower zone, it is convenient to weld to the legs with a disclosure corner, which is enough to simply want the board's board shields. The location of the cascade will make everything stored on them well visible and easily accessible.

Under the main working area of \u200b\u200bthe workbench, it is recommended to choose one or two spills between the legs and organize the exit shelves on the upper part of their part of the keyboard. These shelves are very convenient to equip organizers for the most frequently used tool. Since the load on the exit mechanism is moderate, you can use furniture guides full extension, welding under the table a couple of corners to secure them.

Another convenient zone for storing a fool's smallers is a wall opposite. It is very useful to fasten the perforated panel, where the hooks are conveniently suspended both with power tools and hammers, hacksaws, consumables, and other, including several portable posts with sockets. More or more qualitative to organize space will help one or a pair of shelves, fixed by 5-10 cm above your growth. The bottom plane is conveniently used to mount the lighting, the shelves themselves are a classic "long box" for all useful in the perspective of the trash.

Lighting the workplace

The sources of light should be seriously considering two options: ceiling fluorescent lamps into two lamps or LED lights. The main advantage of the first is low cost, but by negligence mercury tubes it is easy to smash, plus such lighting requires periodic repairs.

LED spotlights are somewhat more expensive, but much longer and less voracious. Of the shortcomings, it is also possible to highlight a sufficiently sharp light that discardes the contrasting shadows. This is solved either by installing matte diffusers or light guides, or an increase in the number of lanterns to 5-6 pieces and the intersection of their light flows. Do not forget about a small portable lamp, which should always be at hand, and an additional desk lamp.

Vice, stops and other devices

As a conclusion, we will give a couple of tips: what and how to complete the workbench for comfortable work. The first and most obvious - plumbing vice. They must be sufficiently massive, the garage is recommended for a solution of sponges at least 15 cm. Please note that it is necessary to mount a vice through the table, providing from the bottom side, a response steel plate with holes. The optimal location is 100-120 cm from any of the corners of the workbench, while it is desirable to provide additional holes so that the vice can be rotated at right angles.

The second unchanged attribute is a metal cutting stove. It is not worth purposefully splitting the table coating, especially if there is a heat-powder gasket. The optimal sizes of the plate - 300x300 mm with a thickness of at least 20 mm. If you are experiencing difficulties in the selection of such a thick metal, weld together several thin plates, having previously pulled them with bolts.

Depending on the sphere of your hobbies, carpentry, a removable mandrel for tin works and several stop-up stoppers, can also be useful: corners with pins, which are inserted into the holes in the worktop with tweaks twisted at the bottom. It is also very useful to take place under the clean and subtle work, putting a glass of glass on a spring rubber lining there.

The primary task of the vestica for the garage is the creation of an ergonomic workspace for plumbing and carpentry work. The article tells about the varieties of work desks and the characteristics of their designs. The following material contains information about the pluses and minuses of wooden and metal models and about the features of their configuration. You will get acquainted with the criteria for choosing equipment and the organization of the workplace.

Full order in the workplace Source Mcahamilton.org.

About types of workbackers

Car owners regularly face the need to perform a variety of repair work. For anyone who is engaged in carpentry and plumbing (no matter, on a professional or amateur level), the competent equipment for the workplace helps to distribute strength and time economically, and also provides the best result. The role of universal equipment suitable for operation in the garage conditions is suitable.

Initially, the workbench arose as a carpentry workplace intended for wood processing. With the emergence of a variety of (including electrical) equipment and separation of professions, the workbench began to specialize. Today, in addition to carpentry, there are carpentry and plumbing workbenches, as well as combined varieties.

The great-grandfather of modern models Source Pinterest.com.

Basic equipment

The vestacle in the garage is called an equipped desktop, consisting of various modular elements, which include:

Metal carcass (table). Its design is designed for solid weight, from 70 to 300 kg (depending on the model). Tables designed to work with heavy and large details (for example, wheels) are strengthened by additional diagonal compounds.

Table top For carpentry and fitter work. Depending on the functions performed, it can be made of galvanized or stainless steel, chipboard, plywood. The storage margin of the countertop is calculated in order to withstand dynamic and shock loads, contact with chemically active compositions.

Accessories. The workbench serves not only the working area, but also the place of saving tools, spare parts and other equipment. Therefore, the required components of the design - the cabinets, screens, drivers (retractable boxes), shelves, hinged holders.

Each thing in its place Source intestroy.info.

Selection Criteria: Wood or Metal

For many motorists, the garage is the second home, so they approach its arrangement with due attention. The acquisition of workbench is especially responsible for the acquisition; The criterion for choice can be the goal for which it is intended. In most cases, such equipment is established to perform the following works:

For regular technical inspection and state support car.

For small locksmiths, small repair, corrections of defects related to the service of the house and the preservation area.

If a plumbing or joinery is part of your hobby.

The first question that gets up when choosing is the material of manufacture. There are wooden (most often homemade) and metal workbenches offered by various manufacturers, both domestic and foreign.

Workplace for the soul Source NW1AB.RU

Wooden workbenches

Wooden workbench in the garage, made in whole or in part of the wood, is suitable for periodic and short work with simple details; It is bad for treating complex metal components. The frame of such models is performed from the wood of strong rocks (beech or oak) and fastened with self-draws. The stability of the table is ensured by additional struts, transverse or x-shaped. Wooden models are usually equipped with shelves or storage boxes. Wood table top on the edge is frozen by metal.

The common model is the design of two massive tumb, interconnected by the worktop. This option looks quite practical because it solves most of the problems associated with the placement of instruments. Despite the relative low cost and good (although somewhat limited) functionality, many believe that the workbench in the garage from the tree has significant cons:

Wooden plumbing table not designed for serious load.

For enhanced exploitation The service life of the frame is significantly reduced.

Wooden workbench Source whilesafe.blogspot.com

On our site you can find the contacts of the construction companies that offer the service of metal structures. You can directly chat with representatives by visiting the exhibition of the houses "Low-rise country".

Table area does not be placed Several types of equipment at the same time.

Wooden surface table top under the action of chemical agents (colors, solvents) and metal dust over time, it comes to dissent, and traces of oils remain forever.

Wood - fire hazardous material; In combination with a chemical collection located in the neighborhood, this property increases multiple times.

Metal workbenches

To assemble a functional plumbing table of metal, special equipment and metal skills will be required (fragments are connected by welding). Metal models collected in workshop conditions have a solid design and modern design. Despite the higher price due to the cost of metal and a more complex assembly process, metal equipment has a lot of advantages, including:

Long service life. Stainless steel models can boast a period of impeccable service in 50 years.

Metal workbench source SHKAF-NSK.RU

Large selection of models And their complete sets. Manufacturers offer options both universal and narrow specialization.

Multifunctionality. You can perform any types of work, including the turning, cutting, grinding.

Mobility and compactness. Many models can be disassembled (fully or partially), and if necessary, add new tools (vice, clamps).

Small weight When saving strength. The countertop is resistant to deformations and damage (scratches).

Minimal care. The design is characterized by increased resistance to corrosive processes and does not need painting. Cleaning metallic dust and chips from the surface of the countertop does not take much time.

Video Description

About the review of workbenks in the following video:

Parameters of the workbench

To determine the size of the workbench, it is necessary to understand what area in the garage you are willing to allocate under the workplace. The choice of design for the arrangement of the garage is based on several indicators:

Depth. Most garages have modest dimensions. Taking into account this restrictions for applying at home, plumbing workbenches with a depth (width) of the tabletop not exceeding 0.5-0.6 m.

Length. An important parameter that should not be reduced without an extreme need. The longer the countertop, the more convenient to perform locksmiths on it, install auxiliary tools. If it is assumed to use a circular saw or an electric jigsaw, these works will also have to highlight a part of the table top. Practically, most of the owners of garages prefer to set the workbenches of length of about 1.5-2 m.

Compactness is one of the advantages. Source koffkindom.ru.

Height of workbench in the garage. Determined by the convenience of the owner and depends on its growth. On average, the arrangement of the tabletop is considered at the level of the middle of the brushes of the hands (if you stand nearby).

Technical clearance. For high-quality cleaning, it is convenient for the lower part of the design to be raised above the floor by 15 cm.

Strength. Welded structures with a support frame of 6-8 legs have the necessary strength. Since most of the car maintenance work is plumbing, the metal workbench will be the best choice.

Functionality. So that the work was comfortable, the spacious countertop is not enough. The racks, shelves and boxes are most importantly acquired. All of them must be placed at a convenient distance from the working area; Well, when a tool, power points, materials and containers for small items do not interfere with performing work, but are always at hand.

Video Description

About the locksmith workshop in the following video:

Organization of workplace

In the average garage there is not a lot of free space. In addition to compactness, the criterion affecting the desktop parameters is the amount of work you are going to devote your time. If it is assumed that you will not only drill and score nails, but also to engage in more complex manipulations, it is worth thinking about a larger table. Periodic processing of parts or blanks is more convenient to perform if the vice and machine for sharpening or drilling are in the assembled state. The garage owner will have to find a solution for several more tasks:

Storage. Due to the limited space, another important task is assigned to the workshop - ensuring convenient storage conditions. The correct workbench is used not only as the desktop, but also as a convenient capacity of consumables, spare parts and tools.

When everything is at hand Source tr.pinterest.com.

Choosing a place. A specific garage task is the choice of space for the desktop. Two conditions must be observed. First, the distance between the car and the workbench and shelves in the garage should be at least one meter. The second condition is that you should be convenient to work next to the car, without risk damage it.

Connections to the electrical stroke. Electrification should be safe, taking into account the effect of dampness and aggressive liquids, ordinary for garage works. Wirch must be laid in a fireproof corrugation or hide in the shoes. If your electric booster has a metal case, it is mandatory to ground it.

The car should not be a hindrance Source yasminroohi.com.

Lighting. Given that there are always shadow zones in the garage (from the car, shelves and racks), the combined system from several light sources, intended for different tasks, will always be a practical option. Above the workbench, in the area of \u200b\u200bwork, it is convenient to install a bright rotary lamp protected by lampshade. Lamp can be made removable; It is also convenient to integrate it in the workshop, and not fasten on the wall - if you want to move the table, there will be no problems with electrification.

Features of models

The workbenches manufactured by the serial way are convenient because their characteristics are set during production and correspond to their purpose. Depending on what technical conditions, one or another workbench will work, various models can have the following parameters:

Material table top. Moisture-resistant plywood or MDF coated with galvanized metal. The thickness of the table top varies in the range of 24-30 mm.

Professional approach source Extxe.com

. Serial models allow a load of 300-350 kg. The workbench of the reinforced series is designed for 400 kg or more.

- 20-30 kg, on a retirement shelf - up to 40-50 kg.

Protection. Castle, key or: high secrecy (pin) can be installed on the end.

Accessories. A variety of shelves, holders, screens and hooks.

The workbenches of the factory manufacture are delivered in a disassembled form; According to the design, they can be divided into three groups:

Besmumboy. An ideal small workbench for a garage of modest sizes. Easy in the assembly design is characterized by a sufficient size of the working surface, which, if necessary, consists (folding workbench). Stability is provided by adjustable legs. Bleightwork models can additionally be equipped with drawers on bearing guides.

Video Description

On the organization of the workplace in the following video:

Singleumbany. Reliable prefabricated design with a reinforced table top and weighing 96-105 kg. Such a workbench is equipped with both a comfortable working surface and a platform with drivers (drawers on ball guides having different heights) or shifts of the stop-up type. Boxes are blocked by the central lock. Some models are equipped with a toolbar.

TwoTuby. The weight of such models is 100-115 kg; They are completed with two drivers with different in height boxes. The maximum permissible load on each box (with a uniform distribution) is 30 kg. The kit may include a perforated screen - a panel intended for placing holders and hooks.

Combined workbench Source searsoutlet.com.

Conclusion

The desktop for the garage is a type of industrial furniture, which should have an increased wear resistance and be comfortable in everyday use. These properties help the owner fully focus on work, thereby reducing the risk of random injury. The garage workbench will be as efficient as possible if its characteristics (load capacity, dimensions, equipment) will correspond to solved tasks.

People engaged in professional or amateur carpentry and plumbing work, it is recommended to equip the workplace with special construction equipment. It is best for these purposes a homemade built-in workbench, to which special vice and a reliable protective device are attached. About what is the workbench, how to make it and collect - tell me below.

Initially, the workbenches were used as equipment for the manufacture and grinding of products from a wooden material. The main task was to strong fixation of the part and the subsequent processing. Such workh is called classic. Time is changing, and the modern workbench is a universal equipment that has many functions and appointments.

table of table.

Garage workbench Features and types

An ordinary workbench consists of the following details:

• volumetric tabletop in several centimeters thick (up to 10-15 cm);
• base in the form of a frame on protruding legs;
• the second shelf below the table tops (serves to store instruments, spare parts, additional materials);
• retractable boxes or shelves that increase the surface and storage area of \u200b\u200bthe workbench.

Modern construction equipment is improving every day, it also affected the workbench. Despite the fact that the main purpose of the device is manual grinding and the manufacture of parts. By appointment, today, the workbenches for the garage, made with their own hands, are of several types:

• for universal processing;
• locksmith and carpentry;
• carpentry.

flooring table drawing

Garage workbench designs

The material from which the workbench is manufactured is also different. Most often, the workbench is installed in the garage or other utility room (in the shed, workshop, storage room), where the area of \u200b\u200bthe room is small.

If you are going to install equipment. For a start, decide for what purposes it will be intended:

• small repair or small locksmiths;
• we will constantly use it (hobbies, home service or plot);
• to support the technical condition of the car.

Installing the workbench, choose a place in the room, which will be:

• compact and stable;
• universal;
• well covered;
• carry out storage functions;
• safe place for you and others;

The standard workbench has a height size of up to 900 mm, and the width and length, depending on the installation site, can be from 1200 mm to 2500 mm and, respectively, from 300 to 1000 mm.

example of workbench

Wooden or metallic

Choose a suitable garage workbench for your size and taste on various construction sites. Here is a large number of drawings.

By choosing a choice between these materials of the manufacture, you should define the appointment of the future workbench.

Wooden model

For simple parts that are not spent extra time, a wooden workbench is suitable in the garage on the frame of the tree of strong rocks or a bar assembled with their own hands into a rectangular design and fixed with the help of self-tapping screws. So that the base fastens well, the wooden struts between the legs are inserted into the base of the structure. They can be attached at the bottom of the additional shelf for storage.

The body of the countertop is assembled from the material of the selected tree (the beech, oak, oak) and two sheets of plywood fit. All parts are fastened with the help of glue and screws and are trimmed along the edge. For safety, when working, the edges of the table top are separated by metal sheets, leaving flights from the wall side.

Note! In the construction forums there are drawings of the workbench for the garage with their own hands, in which two stands are recommended as the basis, bonded with each other with a massive countertop. Such a design solves all problems associated with storage and placement.

However, the wooden workbench has its own minuses:

• the equipment is not designed for severe power load;
• it is difficult to place at the same time several desired devices;
• the base material may not last long;
• the wooden surface is exposed to oils, paints, cream appear;
• there is a risk of fire.

Wooden workbench

Metal workbench

It is no less difficult to assemble the metallic basis for the future workbench. To collect workbench in the garage with your own hands, it is necessary not only to know how to cook the basis of the future equipment, but also possess the skills of working with the metal. Therefore, to assemble a metal workbench, you should have not only necessary equipment, but also by special knowledge.

But, despite the complexity of the assembly - the advantages of making a metal workbench:

• reliability;
• compactness;
• the ability to hold any load;
• mobility movement of the workbench for the garage (you can add, disassemble, add additional items)
• structural strength;
• the possibility of configuration of additional elements (vice, clamps);
• many functions performed (sniffing, grinding, cutting);
• the smooth surface of the countertop does not allow the metal dust and chips;
• saving time and cost;
• easy to care.

Metal workbench

How to make a wooden workbench

An alternative option is inexpensive and easy to operate equipment - Wooden table workbench, made in the garage with their own hands. To make it, you will need:

• board with a treated surface, 40-50 mm long;
• rectangular Brous Box;
• self-tapping screws, nails screws.

Tool:

• screwdriver or screwdriver;
• saw (manual or disc);
• hacksaw;
• roulette.

Important! Before making, be sure to prepare the material. The tree should be completely dryed before the reason for the future workbench will be cropped.

Cut out and collect material for a wooden workbench one person will not be a lot of work. The main rule is to comply with the sequence at the assembly stages:

1. The first thing is made by the vertical legs of the future design.
2. The next step is the assembly of two spatial devices. To do this, connect the base of the table surface and frame. The resulting design is the finished bed.
3. In the selected place in the garage we install a tabletop. Fix it using a bar from the back for a sustainable position and rigidity. Attach carefully - watch not to get into the location of the crossbar in the frame.
4. In conclusion, in the bottom we put the shelf. Board can be taken a small thickness.
5. We process the entire wooden surface with a special fireproof composition and water-based varnish.

Note! In the manufacture of a wooden workbench, it is unacceptable to use nails. Use screws or screws.

wooden workbench drawing

How to make a metal workbench

Before taking optional, determine the height on which it will be located. Standard height - 90-1000 cm.

You will need:

• metal corners;
• the profiled pipe with a diameter of 50-60 mm is 30-40 mm (it will be a framework framework from it);
• metal sheet (base table top 3 mm);
• dry cutting board 40-50 mm;
• guide roller wheels;
• bolts, nuts, screws;
• sheet of plywood or cooker OSB for boxes and walls.

Instruments:

• bulgarian;
• apparatus for welding;
• roulette;
• electric drill;
• screwdriver;
• screwdriver.

Assembly stages:

1. Begin to collect the base of the desktop from welding all metal components (legs, jumpers, corners).
2. Elements that will be in the horizontal and vertical part are additionally equipped with shakes for greater strength.
3. The table top is cut from the metal sheet on the specified sizes and is welded to the pipes. Then, with the help of screws, it is screwed to the resulting base.
4. Bend corners as guides before installing the shelves and drawers.
5. Roller wheels welded on the bottom of the boxes increase the stability of the workbench and allow you to fix and push the boxes without effort.

Drawing of metal workbench

Output

Collect and install the workbench in the garage only if you know how to use the welding machine in practice and are ready to follow safety rules when working.

Washmarket workbench is a working desk with a wide range of destination. It allows for clearance, repair, electrical work, processing of various materials. The workshop should be in any domestic workshop. The masters prefer to design it with their own hands to make the most convenient for themselves.

• nuts and screws;
• fire and hammer;
• paint with brush.

The lockable workbench device is a rigid metal base (made of corners or a square tube). To arrange a worktop, it is better to use a 50-millimeter bar. The steel plate with a thickness of up to 6 mm is stuffed on top of it. To fasten all metal parts, use welding, but you can also screw the bolts.

Installation of the workbench frame and base-top

Before proceeding directly to the assembly, look attentively on the prepared drawing. Make sure that the size of the future workbench fit into the size of the room where your plumbing tool will stand (garage, shed or workshop). Installation of the table begins with the creation of a frame:

1. Cut 4 legs of the same size from the corner.
2. Connect them at the top of horizontal crossbars from the same material. Use welding. As a result, a rectangle must be rectangle (top view) of the specified size.
3. Additionally, make a rigidity line, once again covering the legs in the same way with horizontal jumpers at an altitude of 15 cm from the floor.
4. If you have a cabinet with boxes from the table of workbench, then you will breed a couple of additional supports for it.

After that, you can start assembling countertops:

• make around the perimeter of horizontal metal crossbar holes for the bolted compound;
• cut the boards along the length of the table;
• put them with each other without cracks and lumen, secure in this position;
• make holes in wood coinciding with holes in the corner.

Council. From the upper side of the opening boards must have extensions. They will deepen bolt caps, so that the wooden surface of the countertop remains smooth.

Final stage assembly workbench

The table top will be ready after the plating with the metal. To do this, simply cut the fragment of the required size from the prepared sheet and secure it on a wood basis with the help of self-samples. Please note that after their screwing in the metal there may be burrs. They should simply write to the file.

If you have provided in the design of the workbench boxes or shelves, take advantage of the simple technology of their manufacture. The usual 15-millimeter plywood will be suitable as the material. Boxes are harvested on screws. One account for about 15-20 pcs. Shelves are easier to attach to the corner, but for the boxes will have to additionally buy guide strips - Salazks. They are welded to the frame.

The same plywood can be seen the side sides of the table and make the screen on its back side. For greater stability, the wizard is recommended to attach rectangles or pieces of corner from below to the supports. In this case will help the welding machine. If necessary, screw the vice to the workbench. Finally, process all steel paint structural elements for metal to avoid rust.

Make a workbench for metal work is not very easy, but it is quite possible if it is responsible to go to the case. But you will make sure that no purchased table is compared in quality with the product collected by your own hands.

How to make a workbench: video