MK frogs from mounting foam. Garden sculptures and crafts from the mounting foam. Tools and materials

Sculptures for the garden from the mounting foam. "A FOX"
For the manufacture of figures you will need:
Mounting foam
Pistol for mounting foam.
Cleaner for mounting foam. (We will need to wash the gun, and for cleaning the hands)
Cotton gloves, not one pair.
For the manufacture of this figure, I used the usual empty bottle of kefir.
1 Pour sand into the bottle (for severity, so that the figure did not demolish the wind). Perfect completely surface bottle. Attention! It is necessary to properly gradually, layer behind the layer, give time for drying each layer. Save foam about 10-15 minutes.
2, 3 for the manufacture of paws, tail, I used the tube with a prolit wire. Stick the tail (on it the entire figure), paws (tube), set the desired bend, interpret the joints of the joints. Neck: Paste a tube from under toilet paper, replenish. Dry out

4 Conduct paws, tail.
5 For the manufacture of the head, you can insert something round, replenish. Ears: cut from dense cardboard, soft plastic. Crighted the ears in place, clean, dry. Mustache: cut into a thick fishing line, sneaking with black paint from the cylinder, insert. Eyes are rubber balls painted by the same paint.
Sculptures from the foam to pee with oil paint, from above can be varnished (if the figure is painted not white paint, since the lacquer gives yellowness).
Sculpture from the mounting foam in the garden! "Kolobok"
For the basis of the kolobka, I took a Christmas tree toy, you can plastic ball, something round. Cap ball, with a gradual drying layer per layer.

The handles are made from the tube with the proliferation of the wire. Set bend, replace. Kosyanka is also foam. "Ears" on a shell: cut from cardboard leaves, embed, clean. Sharp knife cut eyes, mouth

.
Inside the legs, ordinary wooden lumps, spending the desired shape.

Scroll to oil paint, can be covered with varnish.

Reading time: 6 minutes

Landscape designer with experience in 4 years

The household plot should be well-groomed, beautiful. Jewelry for the garden is now at the peak of fashion, entered into mass production. They can be made independently using sealant for construction work. What properties of this material, and what kind of garden figures from the mounting foam do it yourself crawl craftsmen?

Pros and cons of work with mounting foam

Like any material, the foammetics has its advantages and disadvantages. Advantages:

Easy.
Applied on any surface.
Amenable to adjustment.
You can make small and large crafts.
Wear-resistant products, moisture resistant.

Mounting foam figures

Disadvantages:

Sunlight and precipitation negatively affect the material, it darkens and cracks. A paintwork is applied to the finished product.
The balloon can not be heated, it is under pressure. Otherwise there will be an explosion.
The sealant is porous, plaster, gypsum are applied to the finished crafts.
The foam is not mounted with water with water, only acetone, kerosene or other solvent, while the composition is not frozen.

What can be made from the mounting foam

With this material make a variety of decorative figures so that the garden plot or the cottage looks original. What crafts from the construction foam do with their own hands:

With a smooth surface - mushrooms, frogs, gnomes, storks, bunches, christmas toys.
With textured relief, repeating the skin of animals - fox, donkey, dog, fish, horse, hedgehog.
In the form of household items - decorated ball, vases, vases, country lanterns, volcano.

Kolobok from mounting foam

Tools and Materials for Work

Home conditions will not interfere with making high-quality, beautiful ornamental decorations for the garden plot. To work with the mounting foam, simple infringement materials are needed. The main list of tools for making crafts:

Foam for mounting. In cartridges with a tube or gun. Pistol is more convenient.
A sharp greasy or stationery knife - trim up too much.
Protective gloves. It is better to take latex, they are more durable than fabric.
Emery paper for polling products.
Paints and brush for decorating.
Cleaner.

Tools for working with mounting foam
For the skeleton of garden figures use:

plastic bottles;
cans;
rigid wire;
wood suites;
rubber hoses of different diameters;
adhesive tape;
if the axle is plated, then you will need a nail to connect to the layers among themselves.

How to make figures for the garden do it yourself

Before starting work, carefully examine the application guide printed on a package with substance. Inside it is liquid, but as soon as it comes into contact with the stream of air - hardening, forming a dense foam. Fully freezes for twelve hours. Simple rules for the manufacture of figures:

It is impossible to work on the street at a minus temperature.
Be sure to put gloves, toxic foam.
The working surface is prepared in advance, checking paper or oil.
Before use, foam shake.
When working, the cart holds down. This does not go out, and more material is used.
First applied the layer, after frozen - the next one. Otherwise, the design will fall apart. Everyone freezes for 15 minutes.
For weighing the frame, sand, earth, pebbles or pebbles are taken.
The surface of the mounting foam is sticky, it takes to 12 hours to frost. Therefore, be careful if the material fell on the skin, use acetone.

Mounting foam lizard
Determines the appearance of the crafts from the mounting foam frame. Before you start, look for the image of the figure, the scheme. Decorate the product after installation, strengthening and weighting of the base. Foam is evenly distributed, giving the product the necessary forms with their own hands.

After a complete hardening of the sealant, the sharp knife is cut off extra details and irregularities, and join where necessary. Apply putty so that the product will crumble. Collect sandpaper by leaving the surface without roughness.

Mounting foam donkey

Covered shape with a thin layer of transparent varnish. The dryer is applied to the dried formation. This increases the wear resistance of the sculpture from the mounting foam. Artificial flowers, beads, LED bulbs are used to decorate the finished design.

Mushroom

If you never made crafts for the garden plot from the construction foam with their own hands, then it is best to start with an ordinary mushroom, and then develop creativity. The construction is based on a simple plastic bottle. The primer will also need.

Mushroom from mounting foam

How made mushroom made of foammetics:

In the container fall asleep sand, pebbles for weighting. This is a future leg.
Cove the preparation of a layer of foam, to make a thickening for stability.
From the foam cutting the mushroom cap. The lid should not be perfect, asymmetry will give naturalness.
It is used to apply a sealant in the form of a cone or hemisphere.
Then join both parts with copper wire and glue.
After drying, it is gently cut off the protruding parts, to predelve to remove the pores.
After drying the primer, the statuette is grin, covered with varnish in two or three layers.

Gnome

Garden gnomes are classic statuettes for decorating a nursery. For the manufacture of fabulous characters, except foam, you will need:

big plastic bottle;
slices of wire;
building gypsum;
acrylic paints;
newspaper.

Garden dwarf from mounting foam

After preparing the workplace and tools, proceed to work. What to do:

First, fill the bottle with a weighting agent so that the figure gains stability.
Apply the foam layer.
Indicate the place where the handles are legs, the gnome cap.
Mix on a wire newspaper.
Split parts.
After drying, the details cut into a sharp knife, removing extra pieces.
Eyes are inserted (sold in the decor store).
Treat the shape of emery paper to full smoothness.
The face and handles of the man cover the bandage moistened in the gypsum solution.
Apply gypsum with a thin layer.
Leave to dry out for 24 hours.
Finished dwarf coloring acrylic to your liking and apply a protective agent. Insert a flashlight into hand, then the figure will decorate and light up the plot.

Frog

Make a garden frog from foam for mounting easily. The main thing is to follow the instructions.

Production of frogs from foam

How to do:

To the pan and the tin can be applied a layer of foam and leave on an hour and a half to set. Pan is a blank for the torso, and for the head uses a jar.
To glue both parts with each other.
On the design, apply a dense layer of foam, and while she sticky, to form the outlines of the amphibian.
Twist the wire and insert where the frog is the upper and lower legs.
Covered foam.
Eyes are made from twisted wire, drawn.
After drying out the product, paint acrylic paints and put the lacquer.
Frog - perfect decoration for garden plot. You can install it next to the pool.

Video

Mounting foam is a unique building material that is widely used for installation, sealing of structures and increasing their thermal insulation. Lovers of jewelry for the garden expanded the scope of application of this building material. Garden figures from the mounting foam with their own hands will easily make every owner of a country house or a country area. In this article you can see the photo ready-made crafts, as well as popular sculptures from the mounting foam.

1. Small weight.
2. Convenience in work (applied to any surface, it is easy to cut).
3. The ability to make crafts of any size.
4. Atmospheric precipitation and temperature differences do not affect the finished product.

Terms of use of mounting foam for garden sculptures

If you have never worked with mounting foam, we recommend reading the instructions from the manufacturer. Do not forget that foam inside the cylinder is a liquid mass, and when contacting with air, it begins to harden. Complete frozen occur after 10-12 hours. Working with foam, use personal protective equipment. No work is advised at a minus air temperature.

Before each application of the mounting foam, the cylinder shakes well. During work, keep the cylinder with a cap down so that the gas does not come out of it and the entire foam could be used. It is not necessary to immediately apply a lot of layers, since the uncomfortable will fall off. Do everything gradually, subsequent layer apply at least after 10-15 minutes from the previous one. For the convenience of applying, use a special pistol.

The appearance of the figure from the mounting foam directly depends on the type of frame. It is worth finding a picture of the shapes or make a sketch to take into account all the nuances and the finished product it looks like a wooden or gypsum sculpture.

For the manufacture of a frame, you can take different materials, for example, plastic bottles or iron cans are suitable. There will also be wooden planks, fittings and wire. So that the sculpture is sustainable, you need to fill it with sand.

Now you can proceed to decorating the crafts of the mounting foam. Equally distribute foam foam, given the future reliefs of the crafts. When it completely freezes, it will be possible to remove unnecessary parts with a stationery knife and correct defects. If necessary, add foam to places where you forgot or want to fix something in the craft.

Protect the mounting foam from destruction will help the layer of spitels. In order for the garden hand to be smooth, gripped by sandpaper. Now take acrylic paints and cover the shape. Preferably two layers and more. To extend the service life of the future masterpiece, it is filled with varnish.

Cead figures can additionally reorganize the most different materials, such as beads, flowers, or make LED backlight, so that the sculpture glows at night.

In order to make a snail for the garden, you will need half a foam balloon. Shipping the table with a liner and start applying foam for the base of the snail. When the first layer will snack a little, apply the second and insert a bottle of kefir in order to make a snail neck. Cover the neck too foam and shape your head.

Make horns snail and slightly elongated fruit. After that, you can start making a shell. To do this, a round foam ride is applied to the body of the snail. Now insert a bucket that will be intended for colors and turn the garden craft to the original flowerbed.

Marker notes where you begin and ends the snail shell, and make curls. When foam is completely dry, polish the product. It remains to decorate the snail and garden bearing ready.

Materials:
- old saucepan;
- iron can:
- oil or acrylic paint;
- foam balloon;
- Wire;
- Beads.

1. Separately fill the pan and the jar and let dry.
2. Bank is a head, and the pan is a frog torso. Create these parts with wire and fix foam.

3. In a place where the frogs should be, secure the wire and also cover it by mounting foam.
4. Now give the shape of the head and torso to be like a frog. Make the lower legs.
5. Paint the craft with paints and then insert the eyes. The frog is ready, now it can be placed near the reservoir in the garden or near the pool.

To make a garden figurine fox, you will need a plastic bottle. Fill it with sand or pebbles, then the wind will not be able to turn your product. Popular bottle, but not immediately a thick layer, and gradually, making a pause of about 15 minutes to set the foam.

For the manufacture of paws you can use a rubber tube. So that the paws were flexible, insert the wire into the tube. The tail can also be made from the tube that will need to be well to be out. For the neck, use a cardboard cylinder from under toilet paper. At it, install some round blank for the head.

Everything is good and put the sculpture appearance of the fox. After that, paint the figure with oil paints and cover the lacquer. Take into account that if the paint is white, then the varnish will give her yellowness.

A plastic ball can be used as a frame of a kolobka. Install it on some kind of support, for example, on a jar or bowl. Apply now the foam, waiting for each layer drying. To make the handles, insert the wire.

Kosynka also form out of the foam, and the ears can make from cardboard. When the foam dry completely, cut the eyes, mouth and nose with a stationery knife. Make the legs from wooden boards. It remains to paint the crawl and bun - ready!

Interestingly, from the mounting foam, not only garden figures can be made, but an uoriginal lantern, which will give your preservation area of \u200b\u200bexclusivity notes and helps to arrange a Japanese-style garden. To make a lantern rack, take the pipe that you need to be allowed from the bottom and install on a flat wooden base. For the lamp bowl, you can use a plastic bowl that needs to be secured from above.

Now pour a foam in layers, waiting for a partial drying of each layer. Comeume a drawing to design a lantern, draw a scheme and embody the idea using a mounting foam. In the center of the bowl, you need to make a hole so that you can fix the cover with self-tapping. Insert the bars in the bowl and throw them.

Screw the lid to the bowl. Now cut down a smaller square from the chipboard. On the one hand is a snag, and on the other, fix the rack. In the center of the squares you need to make a hole to insert the luminaire on the solar panel. Wire hide.

After that, a roof is made from a large piece of plywood, which is installed on the rack. To make a relief drawing, it turned out beautiful, draw it first with a marker on the surface of the lantern, and then carefully cover the foam.

Garden figures from the assembly foam Master Class

The finished product is completely painted. To install it, you need to wear a pipe a little in the ground or make a small flowerbed around the lantern.

Figures from the mounting foam do it yourself Will help transform any garden plot. Not even possessing the skills of the sculptor and the artist, you can make a beautiful sculpture that will revive your exterior.

From the mounting foam can also be used to decorate premises or facades of buildings.

Each dachnik wants everything to surround him both in the house and in the site, looked beautiful, and the price of this beauty was small. Such a desire and becomes the reason that everyone tries to equip comfortable and beautiful paths and lanes in the garden, elegant swelling, stylish and bright flower beds.

One of the types of similar landscape decoration can be garden figures from mounting foam and other materials.

Note!
Fashion for similar came from the countries of Europe, where residents, in such a way they decorate the plots in front of their own private house.

For professional designers, such products appeared on the modern market, such as form for figures, etc. But if you plan to decorate your own cottage figures, then additional financial spending are completely optional, it is quite possible to do with the tools and materials that will be found in every home.

Materials for manufacture

In fact, garden figures with their own hands from the mounting foam can be made using virtually any materials, even such as:

Tree branches;
Plastic or glass bottles;
Building garbage or residual building materials;
Small wood residues;
Gypsum, etc.

Tip: Do not throw such things, considering them simple garbage.
From these materials, you can build enough interesting and unusual figures for the garden from the mounting foam.

Different garden crafts with their own hands from the mounting foam and other materials possess their advantages and disadvantages:

Metal sculptures look very beautiful and original. Such products are often made by professional masters, since it is quite difficult to make such, so it is better to elect the materials to choose the materials easier;

Many believe that wood products on the countryside will look much more aesthetically and natural. Of course, they are extremely beautiful, but to make them, you need to be a real master, and such skills are not available to everyone who wants to decorate their own yard;

Today, self-made artworks made of tires and plastic bottles are huge popularity.. On our site you will find very interesting ideas for similar sculptures, including gnomes, and fabulous characters, and fish, and exotic plants, as well as creative compositions from various figures.

In this article below we will reveal all the subtleties of the personnel structures of such products as the features for the garden from the foam with their own hands, the most budget option. For example, consider the process of making unusual figures of the MOAI, which have an ancient history and the deepest meaning.

Moreover, the manufacture of such sculptures will cost a dacket just in a penny. You may like the idea of \u200b\u200brecreating a small piece of Easter Island at your own country.

Production of "Defenders" of land in its own area

In the ancient times, the sculptures of defenders-giants were quite popular. This is clearly evidenced by colossiles from Easter Island. Our ancestors always believed in the extraordinary power of majestic sculptures.

The echoes of such a worldview can be found in fairy tales where the giants are found, helping the chief hero. You can also meet with majestic defenders in the work of world-famous writers.

Well, if you wish to protect your plot from evil, then install garden sculptures from the mounting foam with their own hands endowed with a deep meaning. In this article we suggest you to take up the manufacture of colossus, of course, not in full growth.

In fact, it would be just a huge figure, the installation and manufacture of which would be related to the rental of heavy loading and labor. But to build shapes for the garden with their own hands from a small foam forces forces to each dac.

There is no need to make a full-scale model. Even substantially reduced garden figures from the mounting foam will be favorably looked, and maintained its main functions, such as suggestion of mystical trembling and protecting the site from "evil spirits".

Note!
Man-made colossiles can be beautiful plants.

Tools and materials

To build figures for a garden from a mounting foam, you need to purchase or receive the following materials and tools:

Construction foam;
5 liter bucket;
Container for plants in diameter coinciding with a bucket;
Reinforcement wire;
Grid;
Polystyrene bar;
Paint water-emulsion

Manufacturing technology

In order to make a colossus for its own garden, the following instruction must be implemented:

Wrap a mesh bucket into two layers and secure the edge;
From polystyrene foaming the nose of the eyes and lips of the coloss;
Wrap the grid lump and attach to the workpiece with the wire;
The gaps between the elements thoroughly fill foam, after which the entire blank is filled with the maximum layer;
Give the figure to dry during the day;

Council. Show patience and do not touch the figure as long as possible.

With the help of a sharp knife cut shape, it is necessary that the crafts for the garden from the mounting foam have acquired a more smooth finished form;
From above, the sculpture must be painted with waterfront paint. Staining should be made at least three layers.

From above such a craft from foam for the garden is installed container with plants, after which the keeper of your garden can be considered ready and he will gladly begin his duties.

Note!
According to the principle of the manufacture of small colosue, it is possible to build sculptures of various types.

Finally

DIY for the garden from various materials will be able to make your plot not just beautiful, but also original. In addition, such decorations will not be expensive. Engage all your creativity and fantasy, select the most suitable model and create a copy of it for your own area.

And the video in this article will be another instruction of how cheap and original decorate the site near your own country house.

Country plot, favorite garden is not only a useful area for various landings and buildings. Here the owners can fully embody their creative ideas. Some delated the area of \u200b\u200bthe original fence, others will install bright and funny garden figures. Available material for creating crafts - mounting foam. This habitual sealant is found in every farm.

Preparation, tool and rules

Foam does not require great physical effort. Crafts are easy to correct - cut up too much, add missing volume. At the same time, there are certain requirements for working with this material.

The figures are made in the open air (but do not act for minus weather). The finished product is not afraid of temperature drops, moisture ingress, but it is better to avoid long-term exposure to direct sunlight.

Transparent varnish will create additional protection from weather conditions. More often use furniture varnish, but applied ship.

It is more convenient to take the mounting foam for winter work - it is better holding the form during the manufacture of crafts, and also more adapted for the conditions of the street.

Mounting foam for winter conditions will be better to keep the form

The material is dumping, so it is worth taking care of gloves (2-3 pairs) and working clothes, as well as about film or other platform protection.

Foam sticky, which means that the solvent is useful for cleaning the hands and surface.

The sealant is applied by layers, giving each layer to dry well (at least 15 minutes). On average, the time of complete drying is 10-12 hours (the big size figure will take up to a week). After drying, you can handle the product - cut off, priming, painting. For the "sculpture" you need a sharp knife (the stationery is suitable), and for the manufacture of a frame - wire, plastic bottles, old unnecessary dishes (pans and so on.), Nails, fishing line, etc.

For the decoration of crafts and protection against external weather conditions, we will need shtclox and acrylic paint. If the product stands on the street, then the paint must be appropriate for external conditions of use. The layer of the shtlotka lines the surface of the figure. For work, take care of a suitable tassel, winds, sandpaper for grinding, water sprayer.

Making figures from mounting foam

To work with complex forms, certain skills are needed, so it is better to start with simple spherical or oval figures (splitting, mushroom, decorative boulder).

Decorative boulders may not just decorate the plot, but also close unsightly economic details

Kolobok

For the manufacture you will need:

styrofoam;
cement mortar;
paints;
gypsum shtackel;
mounting foam;
knife or cutter.

So, proceed:

You can create a ball only from the sealant, but saving something rounding something more economically for the base, for example, a plastic ball. It is covered with foam, and when it gets dry - cut out the muzzle, make the blanks of the pens out of foam and insert them with wire.
The ball becomes like a born - appears face and handles
The bow is cut out too out of foam.
Foam bowl decorates boloboque
The handles and bow are covered with foam, the legs are created from her.
Sembling legs create a foam volume
After grazing the sealant, the craft is sprinkled, the muzzle is corrected, then coated with cement mortar and finally form a smile of a kolobka. Again apply a layer of putty.
After the putty, we wash the cement mortar and again put sand
Now the figure must be painted. It is important to wait for a complete burner, otherwise the paint will feel bad.
Barrock becomes bright
In order for the glitter's aircraft and is better preserved the brightness of the color, cover the battlefish.
Here is a funny and bright character turned out

Mushrooms from foam

Just make both foam mushrooms. Homemade mushrooms will be revived by the plot, add mood. You can install one figurine, and you can "plant" and a whole mushroom cleaner.

Mushroom Polyanka pleases the eye and hosts and guests

Borovik

For the manufacture you will need:

plastic bottles and cardboard box (frames for legs and mushroom hats);
wallpaper glue;
putty;
acrylic paint and primer.

Manufacturing process:

Video: How to make a mushroom from foam

Having mastered simple forms, you can take the tasks more interesting and more interesting. There are many examples - from decorative vases and realistic animal figures to fabulous characters. Everyone will choose a sample to taste, but you can try to create something unique.

Photo Gallery: Examples of other crafts from mounting foam

Giraffe and donkey are suitable for decorating the playground Vase from foam adds severity to the port of the bear - more complicated in the manufacturer

Processing and decoration of foam figures

Crafts from the mounting foam not only paint, but also covered with various decor.

Decorated balls

The basis for the ball can be made in the same way as the born - apply a sealant on the plastic ball. In this case, the drawing will have its own texture that will only be emphasized. Well fit glued necklace tops, beautiful river pebbles, etc.

Another option is to use an inflatable ball that is filled with foam from the inside. This solution will allow you to achieve a smooth outer surface. Start the finished glass decor - and the handicraft will be spectacular and even glamorous.

Smooth surface and exquisite decor make a ball especially elegant

Very attractive looks like such balls laid down on flowerbed, lawn or entrance to the house. Another option is to put them on the elevation, as in the video below.

Video: Garden ball made of mounting foam

Figures of animals from foam

Animal figures can be processed to create a smooth surface or vice versa to emphasize the texture to convey the fluffiness of the skin of the animal.

Foam texture perfectly transfers animal skin fluffiness

Coloring crafts, try to use different shades, make smooth color transitions to achieve a natural effect.

Additionally, various materials are used - branches, wire, stones.

Roe

First you need to assemble the frame of the girlfriend - plastic bottles of various sizes, sticks and tubes.