Door options in the bath. Requirements on the design of the door to the steam room. What are the manufacturer's options

In standard baths there are 2 doors: entrance and door to the steam room.

If you decide to build or more old by type, you should know that they also differ from the number of doors in the bath. For example, in the Ban "On white" it is best to apply a single door to a single door, and in the bath "in black" the bivalve door is best. The height of the thresholds is no less important. It must be about 15 cm., Sometimes even 20 cm. This is important at. In another case, you can simply make more windows.

Naturally, it is better to do from the tree. The usual size of the door in the Ban 80 centimeters width and 150 centimeters high. The door box is done in such a way that the door can open out, and not insight.

For even better thermal insulation, the door is insulated with special modern thermal insulation materials. Also recommended to insulate the bath ceiling - it will reduce heat loss. Doors are needed so width so much heat out through them. Another useful property of the door is that it should not be volumetric and massive, since the goal of the door is good thermal insulation. Strength is not very important, because with an accident it will not be so easy to break.

If glass doors are used, then they must be made of heat-resistant glass (8 mm). For glass doors, high-quality box is required. For its manufacture, use technology that allows you to split a tree with the help of a special safe and heat-resistant glue "D4". Due to this glue, the service life of the glass door is significantly increased. Veneered or solid wood for such a door will not suit, because due to the high temperature, the box can be deformed.

The structure of windows and doors should meet such requirements: 1. Do not heat up; 2. Do not deform due to temperature difference and high humidity.

To ensure the doors, the maximum dense fit to the impeller and the safety of heat, set the combined doors (wooden with glass).

What makes the door to the bath?

For the right choice, focus on your needs, and the general requirements that are provided to. The optimal choice will be a wooden deaf door made of linden, pine or cedar. Its wood will perfectly keep warm, has a long service life, and does not respond to the temperature difference.

What should be the door leading to the bath? Wooden deaf doors are made only from high-quality tree. It should be from the south side (so it will not foul oblique rain), and should be on the knaps. The door on the swords is distinguished by special strength and low heat resistance. To give such doors of shine and special beauty, you can paint them with varnish or olifa, which now exists different colors. Wooden door can be easily made it yourself.

Experts recommend choosing glass doors, as they retain much more heat in the steam room than any other doors. The design of such a door is very diverse. You can choose a mirror door or with a pattern. There are silhouette doors in which only the outlines of the shape can be seen. Such a door makes it possible to look after the children, but it will not work off through such a door.

It is customary to do the doors with steamer, frame (70˟140 cm) and insulated by foam, felt, pacles, or mineral wool. Frames on both sides need to be sewn planed fitted boards. The slots between the jambs and doors are leaving the special tube of rubber, which is nailed to jambs around the perimeter. If the slot is still large, the tube is nourished to the doors, and to the jamb.

For such a door you need:

Planed boards with a thickness of 4-5 cm.
On the edge of the boards, make a sample of a quarter or tower.
Boards need to be put strictly in one row, tightly compress and align.
Apply a label for grooves. Perform grooves need in the form of truncated cones. Acceptable depth - in ½ or ¼ board. The base of the grooves is 50 mm, and their upper parts are no more than 35 mm.
The grooves should be chosen in this way: according to the applied saws with a degree - awards at an angle of 45˚ performing 2 drank a depth of 0.25-0.50 of the thickness of the boards.
To comply with the same corner of the corner, the grooves are focused on 45˚.
A tree between the cuts to remove the chisel. When sampling the grooves you need to make a very smooth bottom.
The swords can be used at once of several types: ordinary, trapezoidal or influx. For the manufacture of the key often use bars that will be equal to the thickness of the board used for the production of the canvas, and in length - longer than 10-15 cm. It is better to use thick swords, they will work less during operation.
Dial on the knapboards, but not completely in order to schedule and check the protrusions.
Eliminate all the shortcomings and remove the swords.
Now you can finally cut all the ends on the cone.
The next stage is to crop the doors of the coal.
Flip the door and very carefully put on the surface.
Use waterproof glue, or bring the veneer to the board. This will increase the service life of the door and ensure high reliability of fasteners.

Landing doors

You can also make a paral door. It can be solid or lattice, it all depends on the destination. For their manufacture, we need bars that are fastened with special glue to each other. Then it is necessary to align the front side. For decorations use Phaneur or tree leaf.

The paving door will become more reliable if applied brazen together with glue for fastening the bauses. But it is necessary to consider that the holes for the impudent must be drilled (strictly 10-15 mm). Begroes are made of solid wood. Length - shorter openings by 5 mm. For stronger mount, use carpentry glue, especially for this purpose.

Written doors

You can make a panel door with your own hands. For it, use a simple bar, where you need to choose a chamfer and calave. Kalevka's sample can be carried out on a separate bar, and on the strapping. The depth of the grooves when sampling is 1.5-2 mm, the panel is inserted into it. So that the door was reliable and strong, use a panel with a thickness of up to 5 cm, and for the inner door - 8-22 cm.

For the manufacture of doors, it is sometimes used by Faneru, a board, wood-chip or fibrous sheet.

Bath entrance doors

For outer doors, you can use a floating panel of 44-50 mm thickness. Or thick or thin boards.

Between the layers it is recommended to lay insulating material (as on the floor). In order to fix the sealer in the strapping, on the edge you need to choose grooves and ridges. Familly is performed at the desires of the host: with one, or on both sides. The fililene can insert into the frame, and then this frame is mounted in the strapping. So the doors are attached more originality and unusualness.

Pilenka with figs (Figure-sided ends), made from shields that are obtained when gluing with each other of boards with a width of 40-50 cm. After that, make the shape of the fililene for bath doors, and such a shield is carefully plasted. On these labels make trimming. Before inserting into the strapping, you need to handle the edge edges.

Pilenks are produced for less than 2 mm distances between the grooves through the fact that wood will inevitably quiet over time. For the upholstery of the doors from Pilenk, it is necessary to take a bar 54x110 mm. Bruks are placed and carefully plane. If you plan to glall the doors, then you need to endure the placement of the fold. And then you can already start drinking the peoples and spikes, and the sample of the groove and fold.

Accessories for bath

Popps and door handles are best made from wood (at least indoors) to reduce the risk of burns. Sometimes they make handles from plastic, it becomes dangerous in that it can melt. For their manufacture, small lumps remaining after the manufacture of doors are ideal. Showing a fantasy, a handle can be given a different interesting form and design, a stroke, or exhausted something out of it. Instead of a tree, you can use bones or deer horns, for example. Below can be installed a metal hook, and from above the lock - the valve must be necessarily made of wood. It is strictly forbidden to put an English self-haul castle in the bathhouse. By logic, the risk will be reduced to be locked in a room where very high temperature.

Loops for doors should be made of stainless material (perfect - from brass). Typically, the doors are attached to 2 loops. But if the doors are made of thick and heavy wood, you can try to install them on 3, and then 4 loops.

Doors from modern materials

Now use heat-resistant plastic or glass. They do not require special care, are also durable and are not dedicated to temperature drops. Doors from such materials are distinguished by a wide range of color gamut, and a variety of patterns and finishes. But minus them is that they do not contain any beneficial properties for the human body. Of course, it is impossible to make such a door with your own hands. It is more realistic to order the manufacture of the door, or buy already ready. The door under the order has the advantage that you can independently choose the color, shape and package of doors.

Do not forget that absolutely all doors in the bath must be processed by moisture-resistant mixture and an antiseptic designed specifically for processing saunas and baths. Now it is known about what the door is consisting of a bath.

When installing the door installation, you need to remember that over time the door will undergo a sediment. To open the door as well, as first, you need to leave 3-4 cm of the gap between the walls of the house and door boxes, the emptiness of which should be inspired.

In order for the temperature in the bath or sauna to keep at the desired level for a long time, it is necessary to choose correctly and install the doors that lead to the steam room, and in the bath itself too. Since the bath and sauna - premises with non-standard conditions and tasks, then the equipment for them is not quite common.

There are no features. It is required to maintain heat and protect against thieves. Because the doors to the bath from the street can be installed any, even metal. The main thing is good thermal insulation: it is impossible to produce heat. But with the Iron Door there are problems. They do not lead them, they do not swell, reliable and well hold heat (if well insulated). But in the winter, opening and jumping to cool, you will definitely close it - not to dry the same bath. But back, if you touch randomly to the surface, then you will say instantly. Here is a review about the entrance metal door in the bath:

I have an inlet metal door in the bath. With the opening and closing of any problems. But in a good frost, I'm talking about it. Jumped out of the wage - everything is fine. And when it came, touched by accident and everything, instantly example. It is good that hand, although there was no joke too.
Metal steel door to the bath - reliably and warm, but you can try

Such a problem is solved: it is trimmed outside a wooden rail or clapboard, covered with varnish. No problem.

In general, there is nothing better in thermal insulation than a well-made cloth from the array. Thick board (you can take a gender tipped) perfectly keeps warm, and even suitable for style to most country baths. There are those and on sale, but if factory billets do not trust, you can make an outdoor door to the bath yourself. If you need a good insulation, you can knock down two shields, between which to fill the bars, the gaps are filled with insulation. Then both shields to connect and arise the perimeter with a thin strip. It turns out warmly, economically and reliable.

But the wooden entrance door in the bath is not without flaws: she rotates and swells. With rotting you can fight impregnation and antiseptics. With swelling not to cope in any way. This case was in the bath near Archangelsky:

We arrived at a friend to the cottage in the bath. The door swelling and did not want to open. With my attempts, we pulled off the handle, then got the mount from the car, they set off. Caught, leave, and cannot be closed - the castle inside. Well there was a sledgehammer and nails. Scored. And then a friend and says, and how then to open? Invented this: I will bring the iron handle, we will be screwed up with healthy self-drawing, tie to the car and turpentine. So did, but the doors had to change.

But another review about the wooden street door to the bath:

I have a wooden door outside of the bath. But I did in the mind: dry wood, which I was impregnated before I did, and after. But on the door: both the hydrobrier, and the insulation, and the foil outside. The casing from two sides is made independent.

The third option - the entrance door to the bath is plastic. If there is no questions to ensure the safety, then this is a good option. And the color can be made by order: exactly under the tree. The imitation is so good that while you do not hold the hand, you will not understand that it is plastic. Their cost is higher than white for the door for about 2 thousand rubles.

Plastic entrance doors to the bath - another opportunity

There is still an option: a frame door, but the frame of steel is also welded outside the metal sheet. Inside a good insulation, on both sides - a plating board or block house. A wonderful option for those who love to do everything with their own hands. In principle, you can order the manufacture of the entire design, or only the metal part (and the door box too).

What door to put in the bath to the street, decide for yourself. A sufficient number of options for choice is, and all (or almost) arguments are also shown.

In Moechny

The doors to the washing room from the rest room or the pre-tribades make ordinary sizes, perhaps less width - to at least instill humidity, which inevitably increased in such a room. The width of the door to the washing compartment is desirable 600 mm.

There are also demands for resistance to moisture: you need to consider this factor. If you choose a tree, then leave a larger gap between the door and the door box. In normal interior doors, it is 2-3 mm, and when installing the door to the washing, it is worth making at least 5 mm. Otherwise, the smell door simply will not open or will not clog.

Good in this sense of the door canvases from glass: what kind of humidity it is absolutely anyway, the dimensions remain unchanged. They necessarily need to be transparent, rather - this is an exception. They make them of a special heat-resistant glass, they fight quite difficult, sold usually complete with hinges, and often with the door frame. So in terms of installation and operation problems should not be. People use years and satisfied. Glass doors in the washer is the innovation that got well.

Sometimes put in the washing and plastic doors. They are good in this room: the heat is kept, moisture is not afraid. There are not only white color, but also "under the tree" so the interior will not spoil. Not everyone is just an idea to use plastic in the bath. In principle, although there is plastic and in the Russian steam room on the windows and nothing, does not melt.

Place the loop better outside, i.e. from the sink

Doors in steam room

Here are already the difficulty begin. Conditions that are created in this room, far from normal: high temperature and humidity. In addition, to release steam for the time of the procedures is very undesirable. Based on these requirements, the door height is selected. Consider more.

Couple in the steam room accumulates under the ceiling. The normal thickness of this layer is 60-80 cm. It is so much enough for a normal guar, with the condition of its periodic update (you need to update during the procedure). Here at such an altitude - 60-80 cm from the level of the clean ceiling and should be perturbed (the top edge of the door).

Let us give an example. With a ceiling height of 230 cm, we obtain the height of the bathhouse: 230 cm - 60 cm \u003d 170 cm. But it is better to leave a larger pocket for couples. In general, the normal height of the door to the steam room is not higher than 160 cm.

With all that, you need another high threshold - about 20 cm. It performs not one task:

Does not let the cold air when walking there and here.
Prevents drafts on the floor.
He serves as an insure from the impact of the top of the pitch: raising his leg, the person instinctively bends below. So high threshold - remedy for cones.

The height of the door in the steam room was determined, you need to solve with a width. Here all at your discretion: you can make wider than the standard, and for a lot. It will be more convenient to pass. With a door height of 160 cm, its width can be 130 cm - it is more convenient to go. With the size of the door to the bathroom, the baths were determined, but when planning it is necessary to consider that they should only be opened from the wage. This is a security requirement: if necessary, knock it out easier.

With the materials for the door to the pile of disagreements does not happen: wood. There may be a matter of breed. Some do not put coniferous, as they have a lot of resin, and hot resin is not a joke. But if it is a Russian steam room, then the temperatures capable of "paying" the resin in it does not happen - a maximum, to which the traditional air heats up is 70-85 ° C. So for the Russian bath fit and spruce. For saunas - only deciduous rocks, but about the doors in the sauna - just below.

Here is a review of an experienced fan of a bath from Chelyabinsk:

All in my bath, except for the floor (larch) and the ceiling (aspen) made of pine. On the walls of a pine circular board. The resin is only in two places, and then in the corners, where her presence is absolutely not annoying. Doors - from the pine imitation of the bar, the jamb - from the thick board, there are no flops. The window - pine under varnish, does not flow, shelves and one of the pine - a board 50 * 150 mm. Feelings are excellent. I often have guests: cold, run out. All perfectly.

So it is possible to use pine forest in the steam room. Nobody died.

The dimensions of the door to the steam room are determined on the basis of the height of the ceiling and the "workers" of the Conditions

What door to put

It will be about the steam room and what type should be the door leaf. Many put deaf, motivating it with thermal conductivity. But from the point of view of security, it is desirable to see at least a silhouette of a person in the steam room. If someone becomes bad, it will be possible to react and come to the rescue. With a deaf door in the steam room there is no such possibility.

What other options can be?

Glass doors. They are very optionally transparent. Matte, tinted, with different drawings or without. The main thing is that the silhouette was visible. Nothing more needs.
Combined. In this case, make an insert from tempered glass. For those who worry about the temperature or preservation of steam, you can put double glass (too opaque). In order to see the movement of a simple narrow long strip. Where to place it is a matter of taste.

When choosing a door, do not forget about this aspect. Still, high temperatures, humidity, hot metal objects and not only. Increased risk area.

conclusions

Doors in the steam room and saunas are selected in different ways. In Russian steam room, they are low and wide, and with a high threshold. In the sauna - the height is not regulated, but the ventilation clearance under the door is required.

Estimation of the centuries of the bath was considered the main attribute of Russian culture. And there is no more useful construction in the modern world, which would combine so many useful functions. To get across and have a good time, there are baths and saunas, which should be built on all safety rules. It is especially important to install high-quality doors both at the entrance and indoors. They must comply with all standards and requirements so that in an emergency not to become an obstacle for vacationers.

What should be?

As for any other door, a number of requirements are made to the constructive characteristics of the door frames and baths for the bath. They must be durable and safe, so as not to create a potential danger to those who are in the steam room. For example, they should not have elements capable of cracking at high temperatures.

Conventional doors that are ideal for installation in urban apartments or office premises are not appropriate here. In this case, special designs are needed for certain technologies and from suitable materials.

Basic Requirements for the doors for the steam room:

They should maintain heat inside the room and not pass it into other rooms. Therefore, there should be no cracks and cracks in the canvas and it should be mounted closely in the doorway.
The design should be hermetic, and the canvas itself must be firmly inserted into the door frame.
The product must be manufactured from such a material that is not subject to deformation from constant high humidity and temperature drops.
The door frame in the Russian bath, in contrast to standard sizes, should be slightly lower. It usually has a height of not more than 1.5-1.8 m, and its width is 0.60 m. Such dimensions provide free movement between rooms and maintain high temperature in steam room.
Interior products in closed spaces must be installed on an approximately 10 cm of the floor to carry out ventilation between the rooms. If a ventilation system is provided in the bath, then the clearance is not needed.
Street door should be especially strong. Its optimal height should be 180 cm to fit into international standards.

Exterior door structures must meet all safety rules, and therefore they must be opened out. This will help prevent the possible negative outcome of the events, because in case of an emergency, it is much easier to go out through the door that opens from ourselves.

Materials from which the canvas and loops will be created should not reassure and burn human in contact. And to provide additional security, you need to make a window in the door that leads to the steam room.

Production of baths for the bath in compliance with all requirements will help protect the construction and inside people. The same rules also relate to windows.

Materials

The door to the bath or sauna should be strong enough and durable, even a few years later, she saved his original appearance. It should be resistant to moisture, temperature and pressure drops. Among other things, it is important that it personifies reliability and security. Therefore, only some types of materials capable of resolving the exposure to bunny conditions are suitable for such difficult requirements.

The real Russian bath is always built of wood. All elements in it are wooden, and therefore the door leaf is made of natural wood. It should be moisture-resistant and heat-resistant, have an attractive design and characteristic to affect people's health.

Wooden designs are an environmentally friendly product.and therefore absolutely safe for use. They have low thermal conductivity, which helps not produce couples from the steam room. The warm sauna should hold high enough to keep the heat for all visitors to get well.

Traditional wooden products look beautiful and make a pleasant fragrance of wood, which allows you to relax and get a pleasant feeling.

But besides numerous advantages, wood still has some disadvantages. For example, its constant finding in a humid environment can deform and seat the design, which will make owners change the spoiled door. And the tree is often the place of breeding insects and the formation of fungus. Therefore, it is very important before installing the door to the door with a special composition.

Most often in the manufacture of wooden canvases for bath structures use Lipon. It has high performance characteristics that are necessary for premises with high humidity and frequent temperature differences. Of the linden and larch, the best products are obtained, which also possess a low price.

Another suitable breed - aspen. The aspen box meets all the requirements, does not dissipate and does not crack over time. The same qualities have both alder.

To improve the human body, it is best to use cedar products. And if you want to facilitate the visual perception of space, then it is better to use Abash.

Of course, naturally possesses natural oak. It has a unique structure, and therefore costs more than other tree breeds. Door boxes from oak look massively and kindly.

Glass doors are manufactured from seasoned glasswhich has high strength. It pushes moisture well, stealingly tolerates high temperatures, not deformed and does not crack. Glass products are distinguished by increased safety and at the same time have a low cost, which makes it possible to install them in modern saunas. Glass is a material that does not need constant care. Sometimes it is enough to wipe the glass to wash the glasses.

Combined structures combine glass and wood. Such a combination allows you to get a beautiful and convenient product that meets all the necessary requirements. It consists of a canvas of a wooden frame and a glass insert, which can have absolutely any sizes.

Metaldoors are best installed at the entrance to the structure. Metal has high strength and stability, and therefore is able to protect any room from drafts and other weather phenomena. Wrapped with a metal with a clapboard or array and adding heat-insulating material, you can get a beautiful and functional product.

Loves From clapgood in that they are able to hold heat inside the room and at the same time not to pass the external noise and sounds inside. If they are pre-treated with a special means, they can resist the effects of moisture. The main advantage of the lining is at its affordable price, and the ability to paint it into any shade makes products from the lining most in demand.

Steel structuresdifferent with increased positive qualities. They are stronger than iron products and have greater resistance to external influences. The steel door should be installed only at the inlet to the bath, since it is capable of heating hard and can burn people who are in the steam room.

In no case cannot be used plastic as the main material for this web. When heated, it is not only capable of molting, but also to allocate toxins that are harmful to the body.

As an alternative to he can use foamed PVC.. Such products are resistant to moisture and to the formation of mold and fungus. Many people use pen designs, which allows you to combine the interior of the room.

Considering the numerous reviews, it is safe to say that it is better for bathing structures a osinovaya, lime or oak door fit.

Designs

Relatively recently, only wood, which has high-quality characteristics, was used for the manufacture of bath doors. Currently use other materials that allow you to create an ideal box.

On the device, the panel and shield door are isolated. The panel has a complex device and consists of four elements. But the shield is filled with wooden slats, veneer or MDF.

Wooden designs for the bath can be two types: deaf and combined. The deaf door completely consists of wood, and the combined is a door leaf with a glass window. Also products can be input and interior. To enter, you need to pick a massive and strong door with a metal box, but the inner canvases must have ease.

For a bath space, it is necessary to choose the right cloth that will be easy to open and close. It can be sliding or swing doors. They are suitable for this structure for all security requirements. The main thing is that the swing box with the seal must be opened out.

In door stores you can find the perfect model that will meet all customer requests. This refers to standard sizes, but non-standard products must be made to order.

Wedge canvases are considered the best option, which easily withstand temperature and humidity drops. The wedges located on them allow wood to maintain their primary appearance and prevent its deformation. With proper care, wedge products are capable of listening to thirty years.

Choosing or manufacturing the door design to enter the bath, you need to think about its insulation. This is important because most of Russia is in harsh climatic conditions.

It is very important to choose the right canopies, because inside the steam room there should be no elements capable of harm. Therefore, it is best to pick up a box with hidden loops, and you can buy a door with absolutely any canopies to the entrance.

The door construction in the bath must be focused on complete sealing. Therefore, it must minimize heat from the wage when opening and protecting the pre-air from getting cold air. To fulfill these requirements, the perimeter of the box should be covered with thermal insulation upholstery.

Features of the type of room

As a rule, the bath consists of several rooms: washing, steam room and pre-bankers. Sometimes it can accommodate the pool. For all these zones, doors are needed that perform certain functions and relevant standards.

Thus, the entrance door for a log bath must be quite reliable and strong so that neither burglars or drafts cannot penetrate inside the room. Therefore, on the input of the building you can install any box consisting of durable materials. The only thing that metal doors will be warm from the inside, but cold outside. This nuance often delivers inconvenience to people who love to run into the street after the steam room.

The canvas made of natural array has the best thermal insulation characteristics and can be perfectly fit into the interior of the bath building. Many craftsmen can completely build it with their own hands. The main thing, at the end of the work, process wood with an antiseptic and paint and variation.

To prevent possible deformation of wood, it is necessary to acquire a product framed by metal. Such a frame will reliably fix the wooden cloth and helps to avoid problems with opening and closing the door. After all, often wood design swells and makes it difficult for people a free passage to the street.

You can install a standard box to the wave room or in a pre-banner. In these zones, it is not so important to preserve heat, so narrow and low models will not be needed. By installing wooden products, it is necessary to ensure the gap of 2-5 mm between the web and the framework. This is important in order for the wood swelling, it was possible to open and close the door without much effort.

For the washing and pre-bankers, it is good to install glass models. The heat-resistant glass is not deformed, does not deteriorate and does not crack. Thick glass can withstand even a very high temperature and maintain heat indoors.

Often, plastic models, imitating natural wood, are often selected for these functional zones. In this case, the plastic copes well with its main tasks: the protection of the space from cold air and keep heat inside.

Choose the door to the steam bath or hamama is much more complicated than in the sink. This is due to the unstable temperature and humidity inside the steam. For it, it is necessary to pick up a low and narrow door so that when the design is opened from the room, it has passed a minimum of heat. In addition, it is necessary to install a high threshold that will not allow the ingress of drafts and cold air flows inside the pair room. Its optimal height should be 15-20 cm.

Choosing a product manufacturing material that will close the steam room, it is better to give preference to a natural tree. If it does not reach the temperature above 85С, then coniferous breeds can be used. For other cases, only deciduous woods are suitable.

On the front of the construction is also very important to install a good door. It does not impose increased requirements, but it must have high strength. Its standard sizes are 50 × 50 cm, which is quite enough for the room under the roof.

Registration

Decorating bath doors - an important point in the design of the construction. After all, not all the decor methods are suitable for premises with high humidity. For example, wallpaper or vinyl stickers will be inappropriate here, since after a short period of time they will simply dug.

Iron and glass designs do not need additional decoration, since they themselves look very aesthetic. And it is difficult to decorate metal or glass without special equipment.

At home it is possible to make a carved cloth. For this purpose, two methods can be used: invoice and on the surface of the tree.

With an overhead method, carved elements are used, which are mounted on the canvas with glue. This method is good because it is not necessary to remove the product from the loops for him, and the patterns themselves can be purchased in the finished form.

Carving on the door canvase is a complex and painstaking job. You can use deaf and slit threads. Carved doors, as a rule, set the construction at the entrance to add it a luxurious and kindup.

It will be very organically to look in the bathhouse structure under the antiquity. Such a design will create a village atmosphere of past centuries, which will allow urban visitors to feel like real villagers. The tree can be independently. To do this, you may need a simulator or brash technology.

Often, the owners of the bath buildings think about whether it is necessary to paint wooden door leafs, because inside the structure a constant high humidity that can damage paint. Designers are advised to paint the wood with a paintwork, which is able to withstand any external influences.

In any case, wooden products need constant care. From time to time it is necessary to update the lacquer layer, and after a few years it will be necessary to completely restore the canvas. To do this, you will have to fully consider all layers of paint or varnish and cover the new tool.

Examples

There are a huge number of different design options for doorways in baths and saunas. Some people do not seek the originality and set standard boxes that are not highlighted in a general background. But there are those who any premises seek to do unique, and therefore invent a variety of methods of decorating door structures.

Cloths with images of soared people and even animals look original. The proportion of irony will add a chubby peasant, watering himself from the jug. A slim girl in a towel will add the feeling of the beautiful.

It is not necessary to install a rectangular door in the paired. A glass model of an oval or zigzag form looks very original. Of course, this option requires a thorough redevelopment, but it looks very impressive.

Often the wooden canvas inside the structure is decorated with carvings. These may be unusual patterns or specific images. For example, a very popular image of the steering wheel or sea wave. Marine themes as nowhere is relevant for baths and saunas.

If glass is selected as the main material for the door item, you can choose a model with an unusual pattern. Very beautiful looks stained glass glasses and mosaic from multicolored pieces. The main thing is that the glass is strong enough and fit for mounting in rooms with a constant change of temperature and pressure.

It is quite interesting to look smooth canvas with inscriptions characterizing the purpose of the room. These may be simple words, and there may be phraseological circulation, prompting the purpose of specific zones.

Whatever do the door to the bath, it is important that they consist of moisture-resistant and hermetic materials that can withstand constant pressure. It is desirable that the minimum of steel elements that are inclined to fusing.

On how to choose the door to the bath, see the next video.

It would seem: the entrance to the bath is not a steam room, temperature and humidity should be ordinary, but no, humidity and here will be increased. And this factor will definitely affect how the entrance door to put into the bath, and what to choose a rest in the room. Regarding the entrance doors in the bath: options are not so much. And everyone, of course, will be their pros and cons.

Entrance doors to the bath: what are there? What entrance door to put in the bath?

Well, here's actually the options:

doors plastic entrance to the bath, with a reinforced profile;
entrance door to a bath from a tree;
metal.

Of course, the country house usually put metal at the entrance. About how much it is increased in the bath - Read on.

Plastic doors input in bath

The first thing that comes to mind when it comes to plastic is that it is easy to hack. Yes, this is a fair concern when it comes to say, about interior models from it. But the streets are made with enhanced profiletherefore there will be nothing easy in such a hacking.

A bit more: inside the case of such a model is inserted steel closed contour, the thickness of which is 2 mm. In addition to protection, it attaches great rigidity and prevents the provision of providing design with thermal expansion.

Advantages and disadvantages of entrance doors to a bath from the street made of plastic

This can look like a plastic street door for a bath (with a mirror double-glazed window)

List the main advantages This type:

Resistance to temperature drops - This plastic is designed to be frost outside, and inside the heat. They are kept.
Moisture resistance - Plastic is not afraid of water, does not rot, not rust.
Tightness - Excellent property when you need to protect the bath from the "unauthorized" drafts that blow warmth.
Heat Protection - due to air chambers inside the plastic heat transfer is very low.
Color variety - there is a good look Fine imitation.

Disadvantages:

Relatively high price. It will cost much cheaper, and the metal are different, there are those that are at times cheaper.
Linear expansion of PVC - This is when the plastic is processed under the high temperature. In the cold, the compression occurs, which increases the fragility. There is also a seasonal change in linear dimensions when expanding or compressed. All this is "treated" with the reinforcement of the structure, in particular, a closed profile.

OUTPUT: High-quality plastic will cost expensive, it makes no sense to put any meaningful.

Useful video:

Despite the fact that the roller about the plastic door to the house, and even with glass, also bivalve, tips, which are given on the choice - delta, it is worth listening to them.

Entrance door to a bath from a tree

Wooden entrance and baths are much more likely than others. Here the role plays tradition and cost. This variety is the cheapest.

Design Maybe next:

shield with a solid filling with an array;
combined (with metallic amplification).

We do not consider as options empty carcass - They are only suitable as interroom. And the variations of the shield with solid filling are fat chubbed board (40-50 mm), and furniture shield.

Specialists are recommended for those doors that are subjected to precipitation, do not use shponov. (Do not swing!) On the surface. Waterproof (not to be confused with moisture resistant) plywood The coating is better than a veneer.

Tip! Protect input visor If there is no terraska. And from oblique rains, it is recommended to make the entrance to the bath on South side.

Pros and disadvantages of the entrance door for a street bath

pros Obvious:

Low thermal conductivity Tree that retains heat inside.
Ecologicaly clean Material, without excretion of harmful substances.
Cheap Compared with metal plastic and metal.

Minuses Also visible:

Wood fuel.
Susceptible rotarymay be amazed mushrooms, insects and rodents.
Changes overall dimensions Under the action of moisture (swells, does not climb in the opening).
Deformed (Corresponding).
Disgust Forming slots and cracks.

Well, the entrance doors for the bath from the street can be protected impregnations - from moisture, mushrooms, fire. And the tree dissipates from incorrect drying, Therefore, in the bath you need a good and correct drying after the procedures (worse than dried, but quickly fastens). Dimensions from water does not change (almost does not change) linden, But it is very soft, it is unlikely to suit at the entrance - this is low wear resistance including.

Entrance Doors for Bath Metal

Since the door at the entrance has the main function Prestressing penetration inside strangers, That metal for this is best used. On the other hand, what to steal in the bath? Unless to fear what the lacquer smells. So, is a question of priorities. Because metal has its drawbacks.

Video

What are good and the bad metal doors at the entrance to the bath

About dignity We have already decided.

Doors for the bath: what better?

Already more than one century, the classic Russian bath is still popular among lovers of "hot steam". She triggers all the cold, and fatigue, as hand removes. Many today build the baths in the country areas using modern technologies. Even the doors, and those are selected taking into account fashion trends. What options for door structures are offered by bath manufacturers, what to choose how to determine the optimal option of door cavals?

Basic doors requirements in the bath

In the bath usually set several doors, unless of course, it is not a wooden log house, heated "in black" (he has only one door). At the same time, it is not necessary to purchase expensive structures, especially for home bath. A strong, reliably closing wooden door will also be a good option. If you spend some time in search, you can choose an entrance door worth up to 3500 rubles.

Since the operating conditions in the bath are different from ordinary rooms, and special requirements are subject to doors:

They should not be heated.
It is extremely important that the doors fit tightly to the door frame. It will help keep warm inside the steam room.
Doors must withstand high temperature mode.
Do not collapse from moisture.

The main function of the doors in the bath is to hold heat, so for the steam room, for example, they are made of size, less than standard. It is also desirable that they are single-handed, and not bivalve. Opening such a door more convenient and safer.

For reference . ON SECURITY SECTION All doors in the bath must break out. This is due to the fact that if the door suddenly swings, then a simple pressing on the canvas will help to open it.

Types of doors for a bath - compare and choose

Special latitude types of door structures for baths do not differ, it can be:

Doors from the wood array (deaf).
Doors from lining (deaf).
Combined, wooden and glass.

Since the doors in the bath are installed, both outside and inside, then we have to figure out what doors, and in which of the situations will be better. The decision on the choice is not such a simple, as it may seem at first glance. Different materials can serve for a long time in one room and quickly come into disrepair in another. The correct choice and installation of doors in the bath will be the key to preserving the temperature at the optimal level in the steam room and the pre-tribades, as well as the long service of the door itself.

In terms of thermal conductivity, wooden doors are there are no equal, they preserve heat perfectly. But their advantage is not only in this. The tree is a noble material, pleasant to the touch. It is distinguished by a harmonious texture and a pleasant natural color. Traditionally, the array doors are used as an entrance door, since a one-piece board fits perfectly into a common style composition of a wooden bath. In addition, such doors can be installed in the steam room.

The only condition when choosing a material:

For classic Russian bath Doors and deciduous, and coniferous rocks are suitable, as the room does not heat up to the melting point of the resin (from wood).
For sauna Doors are recommended only from the decodes of deciduous trees (due to the high temperature regime).

Note . To protect the tree from the effects of moisture, the entire design is impregnated with special compositions, antipirens and varnish.

Of course, wooden doors are not devoid of shortcomings and most essential of them - swelling. But this is a completely solved question. Enough when installing doors, leave between the door blade and a box of 5-6 mm on the gap.

Glass doors in the Russian bath began to be used relatively recently, giving the preservative interior of the preservative.

And such innovation quickly passed, because glass has quite a few advantages:

He does not care what humidity in the room.
Glass is not afraid of high temperatures.
Misses natural light.
Visually expands the space.
Not deformed and does not change in size over time.
It has a relatively small weight.

Installation of glass doors in the steam room is convenient, comfortable and functional. Especially if the glass is transparent and allows you to control the situation. However, more often put stained, tinted or matte glasses that do not cause discomfort. But they also, with a poor health of a person, allow us to see it in a timely manner and to provide him with the required help.

Made doors for the wage with the use of heat-resistant glass, to smash which is quite difficult, but the care for it is extremely simple. It is enough to clean the doors with a sponge with soap or soda solution and no longer needed for them.

For your information . Castles on bath doors are not put, because even the best castle in conditions of high humidity and temperatures can fail at the most inopportune moment.

If we consider the shortcomings of such doors, the glass has a property to heat up, so it is necessarily equipped with a wooden handle. And of course the price. The cheapest and simple version of the glass doors will cost 16000-18000 rubles.

Russian Bath is an oasis of health, so only natural materials should be used for its arrangement. And the tree is one of them.

reference . With increasing temperature, the lining highlights nutrients that have a beneficial effect on human health. So, for example, Oak adds positive energy, the aspen takes the negative, Lipa improves the movement of energies inside the body and so on.

To cover the walls in the bath, the lining is used, which is thin wooden boards equipped with "groin-in-groove" type locks for a more dense fit of the panels to each other. Inside each groove remains a small gap, the capabilities of which are quite enough to compensate for the expansion of the board with increasing temperature and humidity. The best properties have lining from cedar and linden.

It is still used for lining of doors at the entrance and in the steam room. Due to the characteristics of the structure of the panels, of which they consist, the doors do not change the form when the temperatures and high humidity drops. In addition, they look quite attractive. Hollow inside, the doors retain heat due to air layer between the canvas, as well as the inner layer of foil and insulation.

4. Combined doors, wood and glass

There is an option of doors capable of combining several different materials into the original composition. So, in the combined doors, the power and beneficial properties of wood with beauty and glass hardness are perfectly combined. With their help, it is possible to place a room in a certain style, combining traditions and modernity. Combined doors are usually installed in indoor rooms.

For reference . Entrance doors to the bath and the steam room are not widely like in the house. A sufficiently small opening, so that a person can pass through him. Such dimensions of doors make it possible not to produce excess heat from the room.

Despite the fact that every owner himself decides how to build a bath, there are certain parameters of doors, verified by the experience of generations.

So, what are these optimal meanings:

Door height - 1500-1800 mm.
Width - 600-700 mm.
Thickness - 70-100 mm.

Another option of doors for a bath - plastic doors. Despite the fact that they do not enjoy special demand, their thermal insulation characteristics are quite high.

They are not afraid of moisture and can imitate a tree. True, there is a significant drawback - they are easy to hack.

Brief overview of the best doors manufacturers for baths in the Russian market

Our brief overview of the best companies - manufacturers of wooden, glass and other types of beds for baths are based on feedback on the Internet, their demand and surveys in social. networks.

1. Company AKMA - 25 years of history and experience

Created in 1991, Akma managed to achieve stunning results for a relatively short period. To date, it is the largest supplier of glass products in the territory of the Russian Federation. Through the use of high-tech equipment, all manufactured products meet the highest international standards.

Consumers are offered eight collections of glass doors for saunas and baths with engraving, fusing and all sorts of drawings. Using an integrated approach to solving problems, the company is taken for the manufacture of any non-standard products, including the doors of glass.

2. Doorwood - Doors for saunas of practical hosts

For 10 years of its existence, Doorwood was able to organize a full cycle of the production of door structures, starting with logging on its own sector to the production of products suitable for use in saunas and baths. The company produces doors from lime lining, glass and wood.

Each product is distinguished by originality and aesthetic attractiveness. You can choose the doors for the bath for every taste.

3. Aldovuda company - Doors for saunas and bath brand ALDO

The company has proven itself as a manufacturer of high-power glass of high-strength glass for saunas and baths under the brand aldo. Provided Warranty on products - 2 years. In addition to the production of standard products, the company takes orders for the individual manufacture of doors on the sketches and the size of the customers.

Regularly studying the latest fashion trends, its employees are developing a new range, taking into account new directions in interior design. Pleases the company's products with their affordable price.

4. ITS Sauna - the art of the design of the sauna

The main activity of the Moscow company ITS, established in 1991, is the construction of saunas and baths.

Moreover, they are equipped with products of their own production, to which such door structures include:

Deaf doors of lining.
Deaf doors made of massif (wood linden).
Glass doors.
Combined doors of wood and glass.

By purchasing doors for a bath from ITS, you can be confident in their high quality and reliability, since all models are manufactured using folk traditions and modern technologies.

5. Doors Bravo - customer selection

For 10 years of its development, Bravo's doors managed to achieve significant success in the production of doors. It occupies a leading position in the quality of products, a variety of assortment, proposed service and pricing policy available to different categories of consumers.

Due to the presence of a warehouse program, any model of doors can be purchased at the factory as soon as possible, without expecting the week execution weeks. All door structures are provided with a semi-annual warranty.

The story of the plot will tell about the intricacies when choosing doors for a bath or sauna