Wooden rack do it yourself drawings and schemes. Wooden rack with their own hands. What is needed for the manufacture of rack

Do you need to streamline personal belongings? You do not have a specific place to store them? Then you need a rack. This is the most simple and practical way to solve this problem. The rack will be useful not only in the storeroom, as many believe. Its use is practical in the garage, and in the library, and in the office, and even in residential rooms. In order to make a rack, do not need superpowers, and you will not need special tools either. If your tools are limited, then you can make a rack from those materials that you have at home.

Development of drawings

For successful drawing development, you should definitely measure the place where the rack must be located in the future. If you need to make it for storing tools or conservation, then it is not worth it with forms. It must have a standard height that allows you to make the space of the pantry or garage. For convenience it is better to make it up to the ceiling. The photo shows an example of how a typical drawing of a rack for a garage or storage room may look like.

As for the width of the shelves, it all depends on those subjects that you plan to store them. If we are talking about the storage of cans and books, then you will be quite a width of 25-30 cm. As for the storage of the tool, then it should be repeated from its volume, the width of the shelves must match it.

The length of the shelves, as well as their width, also depends on those subjects that will be stored on them. For example, if items are light, one shelf can reach up to 1.5 m, and if you need a bookshelf, for the sake of long-term maintaining the integrity of the rack, each shelf should exceed 90 cm long. If you plan to store a heavy tool on racks , it is better to make a project, taking into account this fact. In the process of making a rack, you will need to strengthen the frame of the metal profile.

Sometimes the rack is used to store different items in residential areas. In this case, it is better to take care of creating an interesting form of this design. So, you can and decorate the interior with a new piece of furniture and functionally fill the space.

Materials and tools for manufacture:

Reiki for the manufacture of crossbars and planks.
Bar used as a temporary backup.
Shelves - in their quality can serve as a plate MDF or chipboard, plywood.
Dowel and screws.
Screwdriver, and better screwdriver.
Level.
Roulette.

If you decide to use chipboard or MDF slab as shelves, then you need to make sure that it is cut into the desired size. Often such services are provided in specialized stores.

We make the base of the design

The first thing you should do before starting to install any rack - it is to place the wall. Wooden bars are best suited for the facilities of carrier supports. The deposit of success will be the installation of a solid base of the rack. If the rack is designed for the entire height of the room, then the reason is important to fix it to the floor, and to the ceiling. If we talk about wooden bars, then they can be either square or rectangular shape. Here everything rests on the size of the finished design, the depth and width of the shelves.

The frame must be twisted with self-drawing, and the corners increase with special planks. Wonderful if the foundation can be fixed to the wall, then the rack will be particularly stable, but in this case there will be no possibility to establish the rear wall on the construction itself.

It is very important to monitor that in the process of mounting the bearing supports are always located vertically. Side transverse discolutions provide greater reliability of the rack, which makes the construction more hard. It is especially important to take into account these factors if the rack is exposed to extensive loads.

Install the box and shelf

At this stage, the rack can be seen in advance prepared chipboard or MDF plates, which should be attached to the bars - from below, on top and sides. The result of the work will be a finished box without the rear wall. But if you have a desire, then you can make a design with the back wall, here you can be guided by our own wishes or objectives of the application of the rack. In general, the simplest design may consist only of bars and shelves. Bruks and shelves can be painted.

With a standard height of the room, it is most practical to install 6 transverse shelves. You can determine their height independently. Recently, racks with the asymmetric arrangement of the shelves are popular. The average regiment is subject to the greatest loads, so it should be particularly strong. For better fastening the shelves, you need to use metal corners.

Another important detail: the thickness of the shelves should be 4-6 mm less than the length of the self-built itself, which the shelf with the bar is connected to each other.

The design will endure even heavy loads, if you secure the corners. To achieve the best results, it is important to check the level of each shelf before it is finally fixed. Angle compounds must be strictly at an angle of 90ᴼ.

Near the finish. Fresh facial panels

If you crossed the rack of the MDF or chipboard plate, then at the end of the trim, you need to stick to all the ends of the details a special melamine edge. It will be possible to make it using an ordinary iron. Stay on treated with sandpaper (fine-grained) end edge and smooth it with a hot iron. Extra edges cut off the stationery knife.

Some shelves can be closed by attaching beautiful doors to them. This type of shelving can be used every day, and its neat appearance will be a good and original decoration of any living room.

Photo

As it often happens that things in the house are becoming more and more, and there are no places for storage. Then we start to invent the most unthinkable options - we put things in the boxes, bags and hide away from the eyes. And in fact, just need to get a rack.

The same principle acts in greenhouses - seedlings and seedlings need proper care and rapid access, which can be provided by making a rack from bars on their own.

The greenhouse is needed so that even in the cold season you can grow vegetables and fruits, greens and even flowers. The temperature in the greenhouse may be like in subtropics, which means that even pineapples can grow with proper care!

But mostly in the greenhouses are growing simpler vegetables and fruits, which are found in markets and shop shelves at any time of the year. On racks, it is convenient to grow greens, flowers, some types of seedlings and seedlings.

Consider more than several types of greenhouse activities:

Greens(See) - the cost of the beam of greens, of course, is not too high, however, this type of product is in demand daily, throughout the year.

Growing greens in a greenhouse, you should know that it does not come to the conditions, it will be enough to maintain temperatures up to 19 s and additionally highlight up to 14 hours a day. The period of time for which the greens is completely ripening, is quite small, and this means that when maintaining the right conditions for the year it is possible to collect about 10 yields.

Another advantage is that greens are profitable to grow on racks, because it can be placed tightly to each other and place in several tiers, which will save space and grow a product in large quantities.

Flowers(See) - In the greenhouse, you can grow garden or indoor. Garden less demanding, but after cutting they have a very short implementation period.

It is also worth thinking in advance about who will implement your products - you will do it yourself or sell dealers. On different racks, several types of plants can be placed immediately, for example, one rack is fully allocated under violet, and the other for flower seedlings.

Saplings and seedlings It is very convenient to post on racks, but you need to know that such racks should have high picking boards.

Build a rack in a greenhouse

In order to make a rack from a bar with their own hands, you don't need a big luggage of knowledge and tremendous experience with furniture. It will be enough to have all the necessary materials and tools at hand, and follow the action algorithm.

Such a rack allows you to save finances, because the price of materials that are needed for self-making are significantly lower than the ready-made factory furniture.

We will need:

Wooden square sequence at least 30 by 30 mm.
Wooden rails for additionally strengthening the design.
Boards of chipboard, plywood, natural tree, in general, everything that can make the shelves.
Screwdriver, screws and dowels.
Roulette, pencil.
Waterpas (level).
Wooden or electric jigsaw for greater convenience.

Important! Selecting the material, do not forget that the rack will be in a greenhouse, under the influence of light, water and temperature, and therefore it must be strong and durable. As an option - a protective coating can be applied on wooden parts.

In this article you have the opportunity to get acquainted with several photos of how preparation for work should look like.

Creating a drawing needs to be armed with a tape measure and a simple pencil to choose the size of the future rack suitable for your greenhouse. The width of the shelves can vary in different limits, but since plants will be standing on these shelves, it will be enough 60-70 cm.

The length should be selected depending on how much seedlings you plan to arrange on one shelf. If its weight is too large, the long shelves will be fed up so that it does not happen, stick to the recommended length of 80-90 cm.

Calculate the height of the estimated design can be measured working surfaces in the house, this is done so that the row on which you plan to transplant, move or fertilize the plants corresponded to your growth.

Typically, the lower shelf is made at such a height so that the necessary things needed in the greenhouse for it, such as fertilizers, gloves and other garden equipment. If the rack is planned to put flowers, then it is better to make low onboard, it will greatly simplify to plants.

After all the wishes are taken into account, and the parameters are mapped to draw the drawing. Usually a schematic pattern indicating all sizes is quite enough.

Go to the main process

Further instructions are not particularly difficult. Let's start with the installation - the carrying support is made from a wooden bar, it will be guaranteed that the base of the rack will be durable.

In order to fix the bars with the baseboards, the screws are best suitable for 3 cm. In the installation process you need to remember that carrier supports should be placed only vertically.

When finally ready the base of the rack is moving to the installation of the box. The material prepared for this purpose is attached to the bars below, at the top and on the sides. As a result, it turns out a box, but without the rear wall.

After the box is ready to set the shelves. For accuracy and convenience, you should make small marks on the side sides of the box, they will indicate the places where the shelves will be located. Shelves are fixed in the same way using self-tapping screws, but you can choose, for example, metal corners.

The crossbars are attached from above to them, which will be supported by the shelves. The largest load usually falls on the shelves located in the middle, so it is possible to additionally strengthen it.

Tip! It is worth noting that the self-tapping screws that are used to connect the shelf and timber must take 5-6 mm more than the shelf thickness.

Since the rack will be installed in a greenhouse, then the additional finish is not required by it, except for longer operations should be covered with a design with protective means. In general, on the attached video, this article features the process of creating a rack from a bar, which is done in several stages.

How to propose racks in the greenhouse

There must be passages between the racks, it may be one or more. The width of the passage depends on whether you will use the additional inventory, such as a wheelbarrow.

For normal walking is enough 50 cm, and for cars - about 60 cm. Also placing the racks, it is worth considering the watering system that needs access to plants, and placing additional lighting.

Usually, for such needs, one shelf on the rack is distinguished, where no more than 3-4 plants should be placed. It is additionally fencing it from all sides, and the lighting in the quarantine zone is too strong. If negative changes in new plants occur, then after a few weeks you can transplancing them on the main racks.

And in conclusion

As can be seen, the process of manufacturing racks from a tree is quite simple, and even a person who has never been faced with such works that has never worked.

The main thing is to remember several non-hard rules:

Choose only carefully dried forest, with minimal moisture.
The knots on wooden bars, the weakest places, therefore, than their smaller, the stronger will be more reliable.
Use additional impregnations for wood. They will remove the tree from the appearance of mold and bugs.
Each plank must be fixed with a minimum on two screws. Only so you can get another design that will not be fused.

Here in principle, and everything, you can buy all the necessary materials, prepare the tool and forward, to the high rank of a homemade master.

The most practical and simple design for storing a variety of things and items in the dwelling is the rack. It can be installed not only in the storage room, but also in any other room, ranging from the cabinet and ending the bedroom, as well as on the closed balcony or in the garage.

Racks - different performance and options

When the apartment or house does not provide special places for storing things, working tools, books and other little things, the dwelling is very quickly lit. Well, if the living space allows you to install an additional chest of drawers or a closet, equip the storage room. But in many apartments such a possibility simply no. Their quadrature is not designed for a large number of furniture. In such cases, it makes sense to independently make a compact compact and at the same time a roomy rack, using the wood material affordable and easy to manufacture it.

Wooden rack is structurally a product with special racks, which are fixed by the shelves. The number of the latter can be any. On the shelves, you can store relatively small items - tools used by domestic masters, dishes, all kinds of trinkets. With proper design of such a design, it is without any problems even in a very modest dwelling. In addition, wood products are suitable for any interior of the house or apartment. The natural wood fit harmoniously into the classic decor of the room, and in the new-fashioned variants of its arrangement, be it Provence or Country.

Homemade racks are divided into several types. Each of them has its own characteristics. For example, stationary products are mounted "by century" in one place. They are constructed in the form of a durable frame with a multitude of crossbar and several racks, allowing you to mount the desired number of shelves. Similar design describes mobile racks. But, in contrast to stationary, they are necessarily supplied with wheels. With the help of the latter, the described furniture without difficulty moves throughout the dwelling. Such an option will suit people who constantly change the interior of the house, rearrange the items in it.

In small quarters, we recommend installing mounted shelves from a tree. They allow you to rationally use the existing area by optimizing the existing space. Mounted facilities typically include a small amount of shelves fixed on the walls. If you need a rack exclusively for small items and things that a person is used every day (hygiene, dining room, kitchenware), you can make a rotating design. It can be mobile, and stationary. Rotating racks are most often placed in kitchens and in toilets, mobile - in bedrooms and children's rooms, installed once and forever - in libraries. Hinged structures are allowed to be mounted in any rooms.

Preparation of materials for assembling construction - where to start?

Making the structures you are interested in, according to specialists, best of all of high-quality boards (timber) from red breeds, oak or more affordable pine. The use of articles from chip wood materials (chipboard) is not welcome due to a small period of their operation. Such blanks make sense to use only in some cases. For example, when a temporary construction is built for storage.

Selected woody material should be well dried. Optimally, if its humidity is not more than 12%. Before assembling the board are mandatory are soaked with special compositions and solutions-antiseptics. If the rack is planned to be installed in the bathroom or in the kitchen, the blanks are additionally treated with water-repellent mixtures. After applying these compositions, the board must be left for a couple of days in the room where we will mount homemade furniture. During this time, they are acclimatized to the humidity and temperature available.

In addition to the boards, we will need metal corners, clamps for shelves, plywood sheets, plans for the construction of crossbars, legs on wheels (if mobile design is planned), brush and varnish for wood coating, fastening screws, joinery glue. The tool for making racks is needed the easiest. There will be a hammer, drill, grinders and an electric bike. Do not forget to take a pencil and roulette. Without them, we will not be able to mark the markup and make the drawings of the design. And without these operations, a really high-quality rack will not work.

Sizes and drawings of homemade structures - Let's listen to specialists

To assemble a practical and convenient design, you should decide on the place where it will be mounted. Measure the parameters of the site allocated for these purposes and strictly focus on them when designing the rack. If the work on the creation of the rack is performed for the first time, and the design itself is intended for storing cans with routines, rarely used items and working tools, it is better to design a simple structure. No need to invent frightened forms. Do not try to decorate a purely practical design. For the manufacture of such racks it is enough to decide on its height and width of the shelves.

If the homemade furniture will be part of the original room interior, it will have to approach the issues of its design more creatively and much more responsible. It is necessary to think about not only its size, but also a decoration option, consider different schemes for designing structures by choosing the best of them. It all depends on your personal preferences, ideas about beauty and financial opportunities. From the tree you can create very unusual structures, which will decorate any dwelling.

Schemes for arrangement of homemade fixtures and drawings for their manufacture can be the most simple (Figure 1). It is not necessary to have skills in the field of engineering graphics. On the drawing you just need to correctly indicate the dimensions of the planned design. And then build it strictly on them.

1. Determine the width by taking into account the available free space in the room. Nuance. The width of the shelving takes 7-10 cm less than the width of the free square. This is necessary so that all assembly works take place in the most comfortable conditions.
2. The width of the shelves expect, based on what purpose they will be used. If the rack is needed for storing large objects (car tires, heavy tools), we take the maximum value (it is limited only by the carrier facilities of the structure). When small things with a small mass are saved on the shelves, the width of 25-40 cm will be enough.
3. The length of the shelves is also selected taking into account the dimensions of the items that will be stored for them. Tip: Do not make the shelves longer than 150 cm. With an increase in their length, the risk of deformation and destruction of the shelving increases.
4. The optimal depth of the shelves is 50 cm. If this recommended size is exceeded, you may have difficulties with the delivery of things.

The height of the shelves take up 30-60 cm. The lower shelf is usually done deer than the rest. It is convenient to store heavy tools and large-scale items. And the upper sections are designed for shoes, clothing, bulk, but light boxes and things.

We make elements of the shelving - the main stage of the work

The rack is made with their own hands according to a clear algorithm: first we cut separate parts of the design, and then we collect them together. Starting work should always be with the preparation of the lower basis of the structures of interest to us. It needs to be made from a massive board. Its thickness takes such that in the resulting shelf it was possible to screw the three-chamber self-tapping screw.

To increase the strength of the base, it is desirable to fix the pieces of timber in the lower part of it. Their length and width take the same. Installation of bars perform across the base shelf in 50-100 cm increments. Now we make side racks (in fact, walls). Use a timber or boards. If we want to save on materials, we use Fanur instead (choose products thickening).

The width of each plywood rack must be equal to the width of the bottom board. But their height is not limited to anything.

Next, on the inner sides of the side walls, we put the marks for the placement of the shelves. We choose their height. Most often, homemade craftsmen make the shelves of the same size, which is wrong. It is better to design them in different ways. Then we will have a truly spacious design that allows you to rationally store things with different geometric parameters.

The next stage of work is the manufacture of shelves. They should enter the rack freely, but at the same time tight. The thickness of the shelves is 2.5-5 cm, the width is equal to the depth of construction. It will correctly be stopped by each shelf by transverse bars (by analogy with the lower base). They are easy to nail with small nails. After that, we make the back of the rack, which it leans to the wall.

If you satisfy the color and texture of the wall in the room, the back of the design can not be installed. In other cases, we make it from chipboard or plywood. Use expensive boards there is no particular sense. We have prepared all the necessary elements, which means that you can start assembling the structure. We will not call any special problems.

Assembling the system for storing things and items - difficulties is not foreseen!

The connection of individual parts of the rack is allowed to be performed convenient for the home wizard. Some use nails and self-tapping screws, others prefer glue. The choice is yours. The assembly is starting with the attachment of the back wall to the bottom shelf. This procedure is better to produce self-stakes. It is clear that when the rear wall in the homemade cabinet is not provided, we skip this stage, and the assembly works are starting from the installation of shelves and side walls-racks. On the latter we have markup. We install holders on the made markers. For their manufacture, materials such as plastic and metal are used.

If there is no special load on the shelves, we attach plastic holders, otherwise metal. And already on the fixed elements put the shelves. Then we take the screws and connect the lower base into one frame with the side walls. It is very important to achieve the perfect evenness of the corners of the design. Additionally, you can bore the base and racks of metal. So we will significantly improve the strength of the rack.

Some self-taught masters do not consider the holders quite reliable and prefer to install shelves on another technology. She is more laborious. But the finished construction is becoming more stronger. Technology involves fastening the shelves directly to the racks on the side of the rack. The operation is performed with a partner (not to cope yourself) according to such a scheme:

1. Connect the base and side walls.
2. One person brings the shelf to the place of fasteners, inserts it and holds it tightly.
3. The second fixes the shelf with self-draws on the reverse side.

The operation needs to be performed very carefully. The slightest break - and the appearance of the self-made rack will be spoiled. To avoid this, the installation process and attachment of each shelf should be carried out using the construction level.

After assembly, the design, in principle, can be put on the place intended for it. But experts advise additionally cover it with a lid, which is installed above the upper shelf. Such an add-on protects the rack and stored things from dust. The lid can be placed on the glue either fix it with nails, screws. It will also not hurt to make our feet on small rollers. It will give the opportunity to move the rack on the dwelling.

If the production of the rear wall or shelves was used by chipboard (chipboard) or other products from compressed sawdust, it is advisable to decorate the design. The easiest option is the salary of the parts of the rack of the melamine film. It is fastened with a slanting iron on the chipboard, with which before this remove all the roughness with the help of sandwich either grinding. Wooden materials from which we made our home closet can also be treated with varnish or verses. Then the rack will look elegant and respectable.

All photos from the article

The straight and corner rack from the tree with their own hands sooner or later makes many garages, workshops, sheds and basements. And it is not surprising, as such shelves are an excellent solution that allows you to place tools, various things, stocks for the winter, harvest and other supplies in the desired order.

Of course, you can buy ready-made feeds or order their manufacture in special organizations, but the price of self-collected designs will be an order of magnitude lower. Moreover, homemade racks can be adapted to the features of the room in which they will be placed.

So, let's try to collect the rack in the garage of the tree with your own hands, but before that we will define the choice of sawn timber, which is advisable to use when assembling.

Choosing materials

The basis of any rack, regardless of where it will be located, are shelves. It is for them that the beneficial cargo that is customary to be stored in various utility rooms will be located.

Such requirements are presented to the shelves as strength on the break, resistance to excessive humidity and low temperatures, characteristic of the utility premises during the cold season. On the other hand, the shelf intended for use in residential premises should be beautifully beautiful.

Therefore, the cutting board is the best material for the manufacture of the shelf. Characteristics of the edged board are presented in the following table.

Type of wood used	Coniferous breeds - larch, pine, spruce; Large breeds - aspen, birch, beech and oak.
With GOST 8486-86 and application	Sorted variety - automotive shipbuilding; Grade first - production of furniture, automotive industry, construction work; Grade Second - construction, furniture manufacturing, automotive; Grade Third - Production of Furniture, Production of Tara, Construction; Fourth grade - manufacture of containers and packaging.
Humidity of the edged board	Raw - over 22%; Raw - antiseptics treated; Dry - up to 22%.
Standard sizes	Standard length - 6.4 and 3 meters; Thickness - 150, 100, 50, 40, 30, 25 and 22 mm; Width - 200, 150 and 100 mm.

For the manufacture of the shelving, dried boards with a maximum width of what is on sale and with a thickness of at least 3 cm.

Tip: Lumber Better to acquire unlighted, since their price is an order of magnitude more accessible to the cost of trained lumber.
It will be possible to obfinate and process the wood properly.

So, we decided on the choice of sawn timber, it remains to choose the appropriate drawings of the shelving with their own hands from the tree on them to make the necessary structure.

Projects racks that can be collected independently

In this article, we will look at the features of the assembly of the feeds of several types, namely:

modifications with metal sidewalls (relevant for garages and basements, where the increased structural strength is important);
modifications with wooden sidewalls (can be applied both in the utility and in residential premises;
modifications, where metal brackets are performed by the reference designFastened on the wall.

In the drawings offered in the article, the structural features of the structure with the indication of the main sizes are depicted. Consider in more detail how on these schemes make shelves for storing various things.

Make a rack with your own trees from the tree is not difficult. It is important to have a set of simple wood tools and have a small margin of knowledge and skills on working with a tree. The choice of size, the design of the shelving and its finishes is depends on the requests and capabilities of the master.

Made wooden racks with their own hands make it possible not only to save finances, but also take into account the features of the room. Before starting all the work, it is important to have answers to several main questions.

Criteria for the choice of design, sizes and materials for the manufacture of improvised shelving

It is important to determine here:

goals and opportunities;
the place where it will be installed;
definition of sizes;
purchase of the necessary materials and fasteners for the manufacture of the structure.

We will analyze each of the points more.

Design options depending on the purpose and place of installation of furniture

There are several options here:

If the rack is required to be installed in a basement for storing pickles or in the garage, you can make a simple design of thick bars and boards. In this case, the strength of the structure is important.
The rack is necessary to accommodate books. Here you will need to use strong challenges from a bar and plywood shelves or chipboard.
It is required to make furniture for the kitchen or hallway. In this case, a large stock of the strength of the design is not important, it is necessary to make a beautiful, air construction.

Determination of design sizes

Based on all the above items, the size of the room, where it will be installed and individual queries, you can decide on the design dimensions, make it drawing and make the detail of the entire design.

In any case, it is necessary to prepare 4 side parts, several longitudinal jumpers and the material on the shelves, finishing the entire rack. Paintwork materials will be added to this, possibly varnish and impregnation.

After completing all the operations listed, you can answer the question: how to make a rack for your home.

Step-by-step manual manufacturer

For example, consider the manufacture of rack with shelves for the room. This is not the most difficult, but not an easy job. We accept arbitrary dimensions:

width - 1220 mm;
height - 2130 mm;
depth - 440 mm.

Preparatory stage of work

For work prepare:

sidewalls 2 pcs 2130/440 mm;
for the upper and lower non-removable shelves, we will prepare a 400/1180 mm fane;
if you want to close the back of the rear part, you can prepare the fiberboard or thin paneur, the size of 1220/2130 mm;
we will have 3 shelves, for them we will prepare the phaneer with a thickness of 19 mm, measuring 400/368 mm;
we divide on 3 compartments, so we prepare 2 partitions from plywood 400/1660 mm;
decorative stops 38/1143 mm;
details for closing the Niza and the top of the rack 90/1220 mm;
for fastening shelves, you can use wood rack or fastening furniture corner.

We will need a sufficient number of self-tapping screws, decorative furniture nails, ornamental clips that mask the heads of self-tapping screws.

Assembling stellage

We proceed to perform the main part of the work. In order to make a wooden rack with your own hands, you will need to perform a cycle of operations:

we clean all the details of the emery paper, pay special attention to the personal parties;
on the sidewalls, fix the furniture corners at the places of attachment of the upper and lower fixed shelves and fix them on the self-tapping screw and glue PVA;
to give the design of greater stiffness, decorative trim, fix on the back of the shelving sliced \u200b\u200bby the size of a sheet of fiberboard or thin plywood. Placing a detail at the same distance from the edge, we simulate a diagonal of the rack. Fix the backdrop on furniture nails with washers;
we set the cabinet to the vertical position and fix the brackets to fix partitions and fix them on the tapping screw and glue;
now we fix the upper and lower decorative rack of 90/1220 mm in size, fix them with self-draws and closed the caps with clips;
having placing the place of attachment of the shelves, on the screw of the maintenance corners and install small removable shelves with the stops in the front;
in the middle we make a big clearance for the placement of outerwear. On special attachments fix the tube for hangers.

Wooden rack made by hand ready. It remains once again to skill surfaces, erase dust and paint furniture in the desired color. You can use various versions of verses and the lacquer design. In this case, you will have to clean the details of the shallow eye several times.

It is better to just paint into any suitable color with various enamels or paints. All prominent hats of self-tapping screws are closed with clips selected.

This is not the easiest option of furniture made of wood. If you need a simple option for the garage, you will need 4 racks from the bar and fixed shelves to be bonded with jumpers. For the manufacture you will need a simple tree knife, hammer.

Making a little simple for cellar or garage, taking experience, you can try to make designs with decorative trim, wood carvings. It all depends on your abilities and opportunities. Good luck.