Lamp made of concrete with your own hands. Stylish luminaire made of concrete with your hands Step by step master class with photos

Lamps made of concrete

how buy pendant concrete chandeliers, concrete lamps: concrete lamps, cement lamps - "heavy", but the amazing beauty of the loft.

For you it is wild - buysuspended concrete chandeliers and lamps made of concrete? Concrete lamps, cement lamps -this is a business card once a wild, incomprehensible, but in demand in our time is the loft. And, yes - massive concrete entertaining form looks very noously (even above his head)! In order to chandeliers I.lamps made of concretethe space was not lost and did not "pressed" with their urbanism, we recommend buying chandeliers , floors and desktop lamps from this material are to use them as a source of lighting, decor element in spacious rooms with high ceilings.

Suspended concrete chandeliers and concrete lamps- Although heavy in weight, but easy to design.

Perfectly combined concrete lamps With wooden, metal structures and give the decor a sense of completion and some kind of warehouse negligence.

Loft originated in the 40s in the states and was the usual style of industrial buildings, factories, factories. All production then (in other matters, as it now) was transferred beyond the city.

Large areas needed to somehow put in order and fill out, therefore preferred high, heavy, simple lamps as lighting items and decoration items.

Lamps on a concrete ceilingthey tried to fix it so that they do not interfere with production, but at the same time they fully covered the space.

Lamp under concrete, Bra From such a coarse material - it was sometime and cheap, and angrily.

In the 50s, Loft was recognized by Bogoe, the Bomond of the West.

Lamps for concrete ceilings in the loft Not just hung in modest workshops of artists and sculptors - they were the owners of "elite housing".

Not everyone could buy a shine from the building material. Buying such a plan was considered exquisite, expensive, revered!

Concrete lamps, cement, concrete lamps and concrete chandeliers from our company Retro Lux are high quality lamps and at affordable prices.

Concrete chandeliers and lamps to buy And create an atmosphere of zoning spaces so easy! It is important to observe minimalism in furniture, use natural materials or natural in the room decoration, and place light sources over some particular subject (picture, sofa, table).

Lamps under concrete Decorate beams, pipes, bearing walls, bricks.

Why decorate? Because some parts of residential or industrial premises leave "as is", without changing them into them.

If this iron plumbing pipe is left, they do not mask, do not paint, do not trim.

If it is a brickwork or carrying wall - refresh its transparent paint and emphasize the lighting device in the Loft style. Lamps from cement Harmoniously looks with large windows-shop windows and huge doorways in the room or indoors and with the "native" objects in the interior.

How to make a lamp made of concrete or concrete chandelier? Concrete lamp do it yourself It is impossible to create - it requires a whole technological process, so we recommend that you do not feel good luck, but to trust us! In our products there are no flaws, inaccuracies, negligence! Each commodity unit is a whole creation of industrial style! The right to an error in which no!

Do you want to buy lamps from concrete and idealize industrial lighting?

Be prepared for what you need will be stocking a significant number of lighting devices. Do not forget to buy table lamps - they are indispensable in local lighting!

If you want to buy retro suspensions, retro sockets, retro switches, and maybe you need a retro wiring - try to buy it all with us! Retro lamps will also be interested - we strongly recommend looking at the pages of our catalogs!

Suspendedconcrete lamps buy It is also worth emphasizing a certain area indoor. In the loft style it is important to send light as it comes from shop windows, it is necessary to lend a part of the room.

Tree and concrete lamp In the shape of a black, white or beige bowl perfectly completes the country style, minimalism or classic in your apartment.

If you are interested built-in lamps in concrete- then when they are installed, leave all the attachments, knobs, frames and fittings.

It reminds how the sophods of warehouses, shops, factories are located.

Lamps from cementor Concrete lamps? Buypracticality, reliability you can with us! They do not give cracks, do not overheat, do not lose their pristine shape and are withstanding to mechanical effects.

Such concrete pillar lamp hang without problems (as an element of outdoor lighting), it is attached to the institutions of Ander Ground, he preferred men in their bachelor's apartments, and modern families are simply crazy about.

Want to b.etone lampgarage.loona.buy Or are still inclined to a wider choice of lighting products of various manufacturers? We will delight you with various models, forms and flowers at an affordable price! Because loft - more than industrial style!

Source: http://retro-luxe.ru/svetilniki-iz-betona.

Concrete Lights Street for Garden and Home Photos

Among lovers to make their own hands, concrete became a fairly popular material due to its low cost and ease of use.

Concrete lamps are very heavy and cold, but this fact does not affect the versatility of such devices, they will perfectly fit into any interior design.

To this end, designers create various forms from cement, they are originally decorated and painted, giving it such shades as gold, silver or copper.

It is worth noting that the lamps made of concrete, made by the hands of designers, are very highly valued, so not everyone has the opportunity to acquire such a luxurious product. To save your money, you can create this light source with your own hands.

Concrete lamp using package

Before proceeding to the manufacture of this type of lamps, it is necessary to prepare the following materials:

milk box. An important condition - the package should not pass moisture, otherwise the concrete is lost its strength. The larger the lamp is planned, the larger the package should be selected;
a bottle of plastic in which the light source should be placed;
dry mix for concrete.

First of all, you should get rid of the bending edges of the packaging and install a plastic bottle into it. Next, you need to drill holes in the resulting design.

Then the bottle should be fixed using a bolt, traveled through the drilled holes and consolidation.

Use electrical appliances just as before, and pay 2 times less!

You can pay for light by 30-50% less depending on what exactly the electrical devices do you use.

To preserve the moisture resistance of the packaging of the connection site, it is necessary to handle the sealant.

Thus, we get the foundation where concrete will be poured. The dry mixture is divorced by water according to the rules described in the instructions for it.

Here the main thing is to prevent excess fluid.

The consistency of the finished solution should be similar to sand test. Therefore, water should be poured gradually, with each particle of the mixture should be wet.

After cooking, concrete should be embedded in the previously made shape, tightly pressing enough, thereby eliminating the formation of empty seats.

For a complete drainage product, the package must be carefully shaking.

All tools after use you need to immediately wash, otherwise the concrete mixture will grab that it will make it removing almost impossible.

After two days (so much requires that concrete hardened) from the package should be rid of, and bolt to unscrew.

To give the concrete lamp originality, it is recommended to make additional holes in it. This will help dispersing the light flux.

The light source is placed in the plastic bottle, which is then connected to the switch. The finished device can be placed both on the wall, and hang under the ceiling.

Lighting device using bottle

Suspension lamps from concrete are not less popular. This device is easily manufactured independently.

For this purpose, such materials are used as a sand-cement mixture, which has in its composition gravel, water, a network source, electric shuffle, selflessness (designed to work with wood), a pair of plastic bottles (different sizes), a bulb cartridge, and additional devices : Knife, drill, carving tube. First prepare bottles. To do this, cut them down their bottom and drill holes for the carving tube.

The bulb cartridge is fixed with nuts and screws on both sides, so the base for the lamp is considered prepared.

The next step implies the preparation of the cement-sand mixture, after which it must be fill in the base (using a spoon) for the lamp, slightly pressed.

This method of laying concrete contributes to the removal of excess air, and also provides a uniform distribution of cement.

When concrete becomes solid, plastic is removed using a knife together with self-drawing.

The uneven surface of the concrete must be treated with sandpaper, which has a grain value 120.

The last step is to connect the cord to the light bulb and to the voltage source. Considering the mass of the concrete product, you should make sure the strength of the attachment.

Concrete lamp

Such products fit perfectly into the general type of garden sites. In addition to its main lighting function, they perform the role of a decorating element.

The material for it serves as a sheet of plywood whose thickness is 12 mm.

Multiple varnish coating will allow finished products to gain shine and flicker. The wiring of the concrete lamp can be organized with the help of foam or corrugated pipe.

The most optimal is the first option, at the expense of which the mass of the lamp is significantly reduced, and concrete costs are reduced.

For foaming foam, glue is used. In addition, another advantage is the simplicity of material removal.

In the event that fragments remained, the disposal of which is difficult, it is recommended to use acetone that fully solvent foam.

The next step is to create a formwork inside the product. For this purpose it is possible to use both plywood and cardboard.

The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezium, which will ensure the ease of its removal.

Fontoam grooves for wiring are laid in the openings.

As a cement mixture, the use of both finished and manufactured independently is allowed.

When selecting the second variant, the M-500 cement is used in combination with sand (one to three ratio). The additive can serve as gravel or crumb of granite (one part).

Diluting the mixture, it is necessary to achieve a sand dough consistency. At the next stage, the concrete is laid in the formwork.

concrete lamp for the garden do it yourself

To make the mixture more tightly, a vibrational grinding machine should be used.

The product filled with a concrete mixture should be covered with a plastic film with a polyethylene film. This will exclude the possibility of water leakage from concrete, as well as give it strength.

After solidification, the formwork is removed, the lamp is grouped, and the lamp is installed.

Such a material as concrete today applies not only for construction purposes, but also to decorate the interior, representing an original and stylish decorating element.

The main advantage of the above-described concrete lamps is not only an unusual design, but also simplicity of self-making.

In addition to the lamps due to the ability of this material, various forms are created a variety of vases, tables and chairs, flower pots.

Source: https://lustrypro.ru/svetilniki/svetilniki-iz-betona.html.

From concrete to paper: Luminaires from unusual materials

Folding origami lamp, a lamp with a plateon from plaster and a lamp with an inflatable light bulb from rubber - gathered ten models of lamps made from unusual, and sometimes shocking, materials.

Concrete

Suspended lamps with concrete base Latitude are inspired by the traditions of Scandinavian design.

In the Beton collection (in the brand assortment, there are also lamps from marble and ceramics - Marmor and Keramik) - five models of lamps, and every distinguishes its form born from a particular association.

In the photo above, for example, the AIR model ("air"). All models except the MAKT lamp ("power") can be performed in one of three colors: white, gray or black. MAKT - only gray and black.

Accessories to choose from - from brass or aluminum. Lamps are manufactured at their own studio production in Moscow.

Wood

Lamps made of wood - not so rarity. One of the most interesting ways to use wood managed to embody American designer John Prokaryo.

He learned to do - under strong exposure to a pair - ash and oak plate plastic. Each bending of a wooden tape is unique, which means that the creation of two identical luminaires is impossible.

In addition to the tree in the design, a matte plexiglass is used, which closes the strip of LED ribbon - the light source.

The designer admits that the idea came to him when he pondered over the flexibility, muscles and bones.

Paper

The paper lamp came up, of course, the Japanese is very strong in the country of the rising sun of the Origami tradition. A series of paper lamps in-Ei Designer Issi Miyaka created for the Artemide factory.

The name of the series is translated from Japanese as "shadow-dimming", which means that the main topic is the game of light and shadows.

The material that designer used for light origami consists of innovative fiber - recycled plastic. Outwardly, it is very similar to paper, but much more practical and stronger.

In-EI lamps are easy to add up and also easily unfold - you can learn the origami skill.

Minerals.

Lindsay Eidelman's Catch Rock Lights Plafof, although it is made of the usual glass, resting on an unusual basis - an unprocessed mineral.

To choose from it can be either a tiger eye or malachite. Each such lamp is manufactured manually to order - all models are unique.

For the first time, Catch Rock was presented at the Milan Design Week in the Nilufar Gallery.

Rubber

Making inflatable lights with LEDs came up with a graduate of the Eindhoven Academy of Design, the young conquistor of the Spanish design of Nacho Carbonell.

The role of the flask performs a plastic bag, which is inflated with an activated LED.

Such a lamp is not heated and not beats, it is easy to transport and mount it, and you can control the light at a distance, through wireless technologies.

The modern polymer makes the Formafantasma company, and the prototype serves as a "rubber" material of the XIX century, which was obtained in the processing of insect excrement.

Plaster

In addition, Nacho Carbonell loves to look at its lamps, as in living organisms.

To create their lamps-trees Light Mesh, he invented a special plaster from sand and a textile hardener, which are applied to the steel grid.

The coating is obtained by sand color, it crept in places and the lumen is lit with warm soft shine.

Nylon

Incredibly durable and durable nylon is one of the most tempting materials for 3D printing.

Swedish designers Regine Kavikkioli, Roman Yurt and Michael Kennedy used him to print her POLLEN LAMPS - lamps, which visually repeat the unusual forms of pollen, if you look at it under a microscope. As the basis, the designers chose birch, dandelion, sunflower, herbs and ash. From January to August, 20% of Switzerland residents suffer from allergies caused by flowering plants. POLLEN LAMPS performs including the educational function: people for the first time can see how pollen looks actually.

Soft polyurethane

The use of a rubber substitute, soft polyurethane, as the main material for creating a lamp allowed German designer Simon Frambahu to completely revise the functionality of the lamp.

Its lamp is similar to the rubber heating. It not only shines, but has a pleasant textured surface that I want to touch - this is a kind of, the ability to "feel the light".

In addition, to use Soft Light as a pillow (literally, "soft light") can be thrown on the chair, hang on the back of the chair or shut down the gap between the wall and the bed - in a word, wherever not enough both heat and light.

Papier mache

"The ability to do something from nothing - this is what determines the aesthetics of Romanian design," the founder of Dizainar's design bureau, Mikhn Ghildus, is sure.

In confirmation of these words at the iconic exhibition IMM Cologne in Cologne, he introduced a lamp "from nothing", or rather from papier-mated paper in a compound with plaster and glue.

The unusual choice of material "balances" the simple form of the lamp: the light is lit inside the hemispheres of the moon. Will not be surprised if this subject will be able to repeat at home.

Dried fish

Icelanders were inventive than all. At the international exhibition Design March in Reykjavik, Dögg Design Designers presented a series of suspended lamps from dried fish.

The designers caught in the coastal waters of the fish themselves were separated independently, and then dried them through the old technology peeped in local fishermen.

As soon as the fish gained a structural form, it was stuck with light bulbs, thereby turning from the trophy to the design.

At the same time, the smaller designers Dögg Design wanted someone to shock: their lamp is only a tribute to local traditions and fisheries embodied in the subject of homemade.

Source: https://design-mate.ru/read/objects/fixtures-from-unusual-materials.

Concrete lamps

Designers increasingly began to use concrete as a material for creating lamps and chandeliers. Despite the heavy weight and coldness, such concrete products are suitable for any interior.

To do this, it is enough to give cement suitable shape, elegantly arrange it, paint in gold, silver or copper. If there are some skills and knowledge, create lamps from cement with your own hands.

This will require minimum of materials and time. Below is several remarkable ways.

Lighting device from cement using a package

To create an original lamp, you will need:

milk box to create formwork;
plastic bottle for connecting the light bulb;
dry mixture of cement to create a suitable form.

The size of the cardboard box does not have a fundamental value. It all depends on what value there should be a lamp.

The main thing is that the package is waterproof, since the concrete is expanding the strength characteristics from excessive moisture. Bending edges of the box need to trim and put a plastic bottle into it.

The design should be secured by bolts that are taped in the previously done nail or hole screwdriver.

Dry the mixture should be diluted with water according to the instructions on the package in which it is sold. It is important not to pour excess water. The fill thickness should be similar to the cookie test.

When the desired consistency is achieved, the prepared form is filled. In the process of laying the concrete, it is important to suggest it well in order not to form emptiness.

At the end, the future lamp should be thicker. These actions will allow remove residual air.

Used utensils, the tool immediately must be cleaned and thoroughly washed from concrete. Otherwise, everyone will have to be thrown when the mixture hardens.

The finished shape is left for two days, as the concrete needs to be seized. Then the package is removed and the bolt is unscrewed.

So that concrete lamps look original, and the light was more scattered, you can drill several holes in them.

In the prepared shape of a plastic bottle, a cartridge with a light bulb is inserted, the wires are connected to the switch, and the product itself is suspended under the ceiling or wall.

Lamp using a bottle (suspended)

Creating a concrete lamp using a bottle.

Others, no less interesting, are suspended concrete lighting devices. Products are easily made with their own hands.

This will require a durable cement-sand mixture with a stone or gravel as a filler, a small amount of water, a rosette, cord, a switch, a wood screw, two plastic bottles of different sizes, a lamp cartridge, auxiliary tool in the form of a knife, drill, tube with Thread.

At the first stage, bottles are prepared. They are cut from the bottom, the holes for the handlebar tube are drilled. The cartridge is fixed with nuts and screws on both sides.

In this way, a form for a luminaire of concrete is prepared. After that, you can begin mixing the cement-sand mixture. When the mixture is ready, it is necessary to fill the shape with a spoon, slightly squeezing from the edges.

After hardening the concrete plastic is cut off with a knife, and the screws are removed. Since the concrete will have a rough form, it is recommended to inhibit its surface with emery paper with grain size 120.

At the last stage, the cord is connected through a metal tube to the cartridge and to the switch. At the end it is important to test the attachments well so that they can withstand the considerable weight of concrete.

In this way, concrete lamps for the ceiling are manufactured.

Concrete garden lamp

Concrete lighting devices for the garden look very well. They perform not only the main purpose, but the space is perfectly decorated. They are quite simple can be made with their own hands, it suffices to follow the instructions below.

At the first stage, it is necessary to make a formwork from a plywood sheet with a thickness of 1.2 cm. It is important to design the form so that at the end it was easy to disassemble.

If you repeatedly open the lacquer formwork, ready-made concrete lights will get the corresponding flickering shine.

At the second stage it is important to carefully consider the way of conducting the wiring. Two options are offered:

Use a corrugated pipe from plastic as an internal formwork.
Creating a shape for a wire from foam pieces.

The second method is more acceptable, as the weight of the lantern decreases and cement saves. You can connect the foam with each other with a special glue.

After pouring the concrete, the material is easily separated. If pieces remain in hard-to-reach places, there is always the opportunity to use acetone.

As a solvent, he easily corps foam plastic.

Formwork for the lamp from the box from under milk.

Internal formwork is created at the third stage. For its manufacture uses plywood or cardboard. It is important that the wall thickness is more than 2.5 cm.

In the opening, the grooves made of foam for wire are laid.

The cement mixture can be prepared from the finished dry mixture, but self-preparation is allowed. For the second method, it is recommended to use the M500 cement in the Sand ratio as 1: 3.

As an additive applies gravel or granite crumb. One part of such a filler is sufficient. Water should be added until the mixture is not too dry, and not too wet, with the consistency of the dough on cookies.

It will be the fourth stage.

On the fifth stage, the formwork is filled with a ready-made mixture.

To do this, first the cement is stacked in hard-to-reach places so that the edges of the lamp were smooth and smooth. Then the rest of the formwork is filled.

So that water does not come out of the concrete, and he gained the fortress, after filling and the tamping it is necessary to cover it with a polyethylene film. In such a form, the future lamp is left at a minimum of three days.

Output

Concrete has long ceased to be a building material used exclusively for the construction of buildings, fill the screeds, the establishment of the foundation.

Today it is used in decorative purposes.

Cement is suitable for creating beautiful and original vases, candlesticks, chairs, garden tables and flower pots.

This material is distinguished by affordable, low cost and ease of use. And most importantly - to create decorative masterpieces, a sufficient minimum of materials and a completely affordable tool.

Source: https://kladembeton.ru/izdeliya/obshie/svetilniki-iz-betona.html

How to make a concrete lamp

Among the homemade craftsmen, the most popular consumables is concrete, from which you can make a variety of a variety of interior items, for example, a decorative lighting device. This building material is quite convenient in use, while inexpensive. Luminaires made of concrete are quite heavy, but it does not affect their functionality. Such decorative products are perfectly suitable for any design solutions when designing the interior of the premises.

With the help of a concrete solution, designers create interior items of a wide variety of forms, paint and decorated with additional accessories, give the product shades of gold, silver, copper and others.

It is important to note! Concrete illuminators of handmade experienced designers are quite expensive. Therefore, not everyone can afford to decorate their home with such an exclusive interior item.

In order to save your home budget, you can independently make such a lighting item.

Concrete illuminator with their own hands using the package

Before you begin to make a cement-building lighting device, it is worth pre-prepared for this event - to collect all the necessary consumables and tools.

For the manufacture of a concrete lamp, the following materials will be needed:

Milk cardboard package (the more the illuminator is needed, the larger the volume there must be a package).
Plastic bottle for placing light source (light bulbs).
Dry concrete mix.

Step 1

It is necessary to free up a package from under milk and trim its bending edges.

Step 2.

Further, a plastic bottle is inserted into the box and through the through hole will be drilled. To conveniently do it, it is recommended to pre-with a nail or a knife in these places to do small holes.

Step 3.

Insert a bolt and secure it to secure it.

Important! Concrete lamps must have a fairly sealed case. He should not pass moisture. Therefore, the plots of pillars of the package with the bolt are necessarily embarrassed by the sealant.

Step 4.

Preparation of cement mixture in accordance with the instructions from the material producer. In this case, the main thing is not to add extra water.

The finished solution should resemble the dough, kneaded for cookies.

At the same time, the mixture should be thoroughly mixed so that there was not a single dry grain.

Step 5.

The free space between the bottle and the package is clogged with a concrete mixture (it is definitely well pressed - there should be no hollow plots). To get rid of the bubbles formed with air, the workpiece must be carefully shaking.

Important! Immediately wash the container in which the cement mixture was preparing, otherwise, when it grabbies, it will be quite difficult to remove it.

Step 6.

We need a product to give time to dry - the concrete must take good, that is, the whole moisture should come out of it. To do this, you may need about two days. After that, the box from the milk is removed, the bolt is twisted.

Step 7.

In the obtained billet from concrete for the illuminator, you need to drill holes of one or different diameters.

Step 8.

The light is placed inside the housing, the wiring is made, the connection with the switch is made.

A unique lighting device from concrete is ready for operation!

Concrete illuminator with their own hands using plastic bottles

No less unique are lamps from concrete, made on the basis of two bottles of plastic of different volumes.

Consumables

Two plastic bottles of different sizes.
Light source.
Cartridge with a cord.
Cement mix.

Tool

Electrock with drills.
Self-tapping screws.
A sharp knife.
Thread tube.

Concrete lamps do it yourself

Recently, concrete has become a popular and fashionable addition to the interior. As a decor element, he entered the design with the Loft style in the 50s of the last century.

To date, it is possible to make tables, dishes, chairs, facades of furniture, sinks and more from concrete.

In this article we will tell you how to make a table lamp of concrete with your own hands.

What is concrete?

Concrete is an environmentally friendly product that can be recycled and reused. Concrete preparation recipe is simple enough. All you need is cement, crushed stone, sand and water.

The exact ratio of all components of the solution is very important, since the strength of future products depends on this. The main component of the concrete mix is \u200b\u200bcement.

When choosing its brand, it is necessary to determine the level of load and the impact of external destructive factors.

concrete lamp do it yourself

Pay attention to the water that you will be added to the concrete mix. If there are components in its composition, violating the structure of concrete, it is better to refuse it. Perfectly suitable river or lake water.

Speaking about the ratio of proportions, they can be viewed on the reverse side of the packaging. Remember that this ratio is quite conditional, so an unexpected result may turn out without accurate calculus.

Concrete in the interior of the living room, 40 stylish photos

Concrete lamps in the style of loft do it yourself at home

To create a concrete lamp with your own hands at home, it is best to use a decorative concrete.

This concrete includes natural components, so it is safe for health.

In addition, decorative concrete allows you to imitate various coatings: wood, stone, decorative tile, brick and much more.

No matter what concrete you use, it is recommended to sift it before mixing. It is important to use a construction mask that protects the respiratory tract from harmful dust.

What is needed for the manufacture of Loft lamp with their own hands?

Concrete is perfect for the embodiment of creative ideas.

Despite the coldness of the material, such products bring comfort, heat and complement any interior style. Also concrete can be combined with other materials.

In the manufacture of a concrete lamp you can give any color using special dyes for concrete.

The main advantage of concrete is naturalness and environmental friendliness. It can be easily made independently without using any special materials, tools and accessories.

How to make a desk lamp with your own hands? You will need:

durable cement-sand mix;
drill;
cord;
cartridge for the lamp;
thread tube;
two plastic bottles of different sizes;
self-tapping screws.

The first thing to do is to prepare bottles. To do this, cut the bottom and drill holes in the caps of the bottles. The size of the opening should be so that you can insert a thread tube.

Then insert the tube into the resulting holes and fix its position using nuts. Get the resulting design on the bottle. Use screws to stabilize bottles.

In this way, a form for a luminaire of concrete is prepared.

How to make a bottle lamp with your own hands

Now you can start mixing concrete. The main thing is not to overdo it with water. The mixture should be like a dough for cookies.

Mix it thoroughly so that each grain of the mixture is wet.

Remember that all concrete work should be done in gloves, as concrete is very dry skin, and concrete dust is not output from the lungs.

The resulting concrete lay out the form. Use a large spoon for filling the shape.

Shake and squeeze a bottle slightly after each spoon to make sure that the mixture is distributed evenly.

At the end, shocked well. This will help remove extra bubbles.

Do not forget to immediately wash the dishes in which you missed the concrete. Otherwise, it will quickly grab, and it will be extremely difficult to remove it.

After a couple of days, as soon as the concrete hardens, you can cut the plastic bottles with a knife and remove the screws. Since concrete will have a rude shape, its surface is better to pass the sandpaper with graininess in 120.

The last step is to attach the cord through the metal tube to the cartridge and switch. Make sure that the lamp is well fixed and fasteners will be able to withstand the considerable weight of concrete.

Loft-style interior - arrangement tips

Ordinary concrete, which has an unsightly gray color, is not particularly beauty.

Concrete color

Concrete design optional should be gray and dim.

Thanks to modern technologies, mineral pigments and metal oxides, you can give products from a concrete of any shade.

Dyes are distinguished by durability and will not lose the tone during operation.

Concrete color can be changed by various methods. You can apply a layer of paint to the ready-made product or make coloring additives at the mixing stage of the components.

Board lamp loft do it yourself

You can also make a concrete lamp using packaging from under milk or juice. The principle of manufacture is still the same: pour the shape of concrete and leave a place for the cartridge. After a couple of days, remove the packaging and get a gorgeous decoration for your home.

Concrete lamps are creative, fashionable and durable. What is wondering if you already have cement, such a man-made product will cost you much cheaper than the purchase lamp. Do not be afraid to dream, fantasize and incarnate your ideas!

All the well-known concrete, it turns out, is not so pronounced to be the riser of exclusively dirty buildings. This is a very artistic material from which interesting crafts are turned on in masterful hands.

We are ready to visually confirm the said. Watch photos, dear readers.

Rooms for houses

Such a pretty thing can be placed in your garden (found on Chezlarsoon).

Pens for boxes

To make these things, you will need, of course, concrete itself, screws and small cardboard boxes, for example, from under the light bulbs. Everything is very simple (found on Projektila and SignedBytina).

Bottom for vase

Not every interior is suitable for the designation design. However, the novelty and the idea of \u200b\u200bthe idea from being not less (Found on AdailySomething).

Clock

The thing is easy to manufacture. Any form and design. It is only necessary to find a suitable mold, pour into it a solution. After drying it, the mechanism is joined (found on Instructables).

Stand for tablet

The basis of the product is the usual bucket from under popcorn.

Crafts in framework

Concrete is great for small crafts. Molding, solution, for some time drying, and now in the hands of the original thing. It can be decorated with a frame (found on Skonahem).

Heart shaped handles

Hooks

Light bulbs-hooks - such a project, perhaps, one of the most interesting things. Why? Yes, because the idea of \u200b\u200ba new life of ordinary old things in itself is always attractive.

And the functional component of the crafts is also substantial. On the fixtures you can hang even enough heavy things - coat or cloak (found on the Instructables).

Refrigerator magnets

Non-reliable subject. The main thing here is to press the magnet before the concrete finally freezes (found on the athomeinlove).

Silence for tables

The strength of products is obvious. And after drying, they can be diversified with bright paint (found on LoveAndlavender).

Cutting board

The final stroke when creating such a household item should be Okurization so that the board becomes perfectly smooth (found on adailysomething).

Candlestones

An ordinary cardboard box made from under milk (found on Chezlarsson).

You can play with forms and sizes of products (found on InmyownStyle).

To create original crafts, absolutely any techniques will be useful - coins, adhesive tape, plastic cups, baking molds (found on Sayyestohoboken, Signepling and Naver).

The bottom of the plastic bottle (found on ELLASINSPIRATION).

And then the master found the use of a simple tin can (found on Monsterscircus).

A little fantasy, and here you have an original thing (found on Nimidesign).

Concrete pots for plants

Items can be any shape, different colors (found on Ruffledblog).

A few triangles joined and made a template. And already on it, this is the subject of the interior (found on AbeautifulMess).

And again on the creation of a pretty thing inspires the usual plastic bottle. It is convenient to vary the height of the product (found on HandmadeCharlotte).

Flowers in concrete! Yes, still stylish asymmetry performed. Such a bauble is good as a gift (found on Site).

But examples of symmetric pots of any shapes and sizes. Looks beautiful, quite modern.

Concrete lamps

Another bright idea. When the form under the base of the lamp is chosen, then you only need to gain patience. We'll have to wait a bit until the solution freezes (found on Pastill).

Concrete is great for decoring lighting. It is durable and stable. In addition, with the design, there is an opportunity to add to experiment, the casting exactly that I want (found on Site).

For this lamp you need only an air ball. Then do not forget to do the holes for the wires and align the surface of the sponge (found on ELinsvra).

A lampshade of such a form will look good in the kitchen. It can be painted in favorite color (found on Esmeraldas).

Concrete and plastic bottle are simply created for each other. So many interesting options. The bottle is beneficial to the fact that it is convenient to remove the wires through the neck (found on Brit).

Original table lamp

To make such a miracle, you need to prepare a clean small plastic bottle with a handle, a cartridge with a wire and sandbetone in proportion of 1: 3. Just do not make the concrete too thick, it will not be registered normally in this state. It is better to add plasticizer for better plasticity.

Before molding, do the hole in the bottle for the wire, as shown in the photo. Passe it along with the cartridge and accurately complaint concrete. Here the wire goes through the canister handle. For the platform, cut the plastic canister and carefully pull the resulting lamp. If desired, the appropriate lampshade is desired.

Ready lamp without lampshar

Create a lamp on your own

We will proceed to the manufacture of a lamp from concrete. Our instruction describes only the principle of work, and forms can take what your soul you want.

Classic concrete lamp

Concrete lamp in kitchen interior

To create such a lamp from concrete We will need:

As a form, the lampshade from "IKEA" was used, for itself can take absolutely any shape. But note that, most likely, after the fill, it will not be suitable for anything, and it will have to throw it out.
Special cement mix for modeling. But on the expanses of the post-Soviet space, it is difficult to find it, so you can take ordinary cement, and fine-flow sand. Yes, and the price of homemade solution is much lower than a special cement modeling mixture. Optionally, you can add a plasticity plasticity and pigment.
Polyethylene film.
Cartridge.
Emery or sandpaper. But it is best to get a manual grinder with a disc on concrete.
Metal cap from chandelier.
Transparent building glue or liquid glass.
Screwdriver and pair of self-tapping screws.

The manufacture of the lamp is conditionally divided into the following stages of work:

We spend the future formwork for concrete from dust and dirt.
Cooking a concrete mix.Exemplary proportions of cement and sand 1: 3. The amount of water with a plasticizer (or without it) should be so that the mixture is in consistency as in the photo.

Attention! All concrete works in gloves. Best if they are supplied from the respirator and safety glasses.

Concrete is much dried with skin, and cement dust is not output from the lungs.

Consistency of the working mixture

Gently and evenly apply the resulting solution on the inner side of the formwork.

Application of concrete

Now it is necessary to dry concrete well.To do this, tightly cover the form with polyethylene, and after a day you can try to reciple. If the concrete will be pulled out bad, leave for a couple of hours and try again.

Drying of concrete plafmon

Forming Product

With the help of grinding, bring the resulting lamp to a neat state.

Grinding concrete

I will postpone in the direction of the plander and take the second part of the lamp.Customize the metal part from the chandelier under the resulting concrete product and install the cartridge in it. If the idea arose to leave one cartridge - drive her away. The bulb cartridge simply will not stand the weight of the concrete lampshar.

Mounting design lamp

Insert the resulting system of fastening and lighting into the ceiling, we mount everything on the ceiling and enjoy the result.

Ready lamp

Attention! If you do not have a suitable form for a ceiling, it can be created independently of thin plastic. It is cooked from all sides of cement paste (cement + water), dries and the finished lamp is obtained.

Plastic concrete lamp shape

Lamp in the garage style

The video in this article will tell in detail how to make such a lamp on its own.

Floor lamp

In the image and likeness of the previous master class, you can make a lamp of an interesting round form. A dense air ball will act as a formwork.

It just needs to be deceived by cement mortar, but not the latter and not solid layer. So the ball simply will not stand the weight of concrete. We wait until the layer is dry, piercing the ball, insert the plane and admire the wonderful suspended lamps.

Lamps from Sharikov

Luminaire projects choose the model in the shower

Such products will also perfectly fit into the landscape of any subsidence, giving him lighting, and decorating with its bizarre forms. The most remarkable product from concrete is not only the fact that from it you can create the most unimaginable forms, but also the fact that they will delight the eye of any dozen years old.

And the concrete has an excellent feature of good workability. Everyone, if desired, armed with non-hard materials and a violence of fantasy, can create a unique project worthy of modern exhibitions. In our publication, we collected simple and interesting ideas of lamps from concrete made by their own hands.

Concrete is a unique material. From it you can cut out anything, to apply an interesting texture or stick to the brilliance and paint. It all depends on fantasy and preferences.

As you can see, the form of concrete lamps can be different. A little diligence and in life, even the smallest of your fantasy is incarnated.

Concrete lamp

Such products fit perfectly into the general type of garden sites. In addition to its main lighting function, they perform the role of a decorating element. Following the further recommendations described, these lamps can be quite possible to make themselves. First you need to make a formwork. The material for it serves as a sheet of plywood whose thickness is 12 mm.

When creating a form, it is necessary to ensure the possibility of its light parsing. The foundations of the base are desirable to cover with varnish, which will then disconnect it from solid concrete. Multiple varnish coating will allow finished products to gain shine and flicker. The wiring of the concrete lamp can be organized with the help of foam or corrugated pipe. The most optimal is the first option, at the expense of which the mass of the lamp is significantly reduced, and concrete costs are reduced.

Garden concrete lamp

For foaming foam, glue is used. In addition, another advantage is the simplicity of material removal. In the event that fragments remained, the disposal of which is difficult, it is recommended to use acetone that fully solvent foam. The next step is to create a formwork inside the product. For this purpose it is possible to use both plywood and cardboard.

The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezium, which will ensure the ease of its removal. Fontoam grooves for wiring are laid in the openings. As a cement mixture, the use of both finished and manufactured independently is allowed.

When selecting the second variant, the M-500 cement is used in combination with sand (one to three ratio). The additive can serve as gravel or crumb of granite (one part). Diluting the mixture, it is necessary to achieve a sand dough consistency. At the next stage, the concrete is laid in the formwork. First of all, it is recommended to fill out hard-to-reach places, and then the rest of the space.

concrete lamp for the garden do it yourself

To make the mixture more tightly, a vibrational grinding machine should be used. The product filled with a concrete mixture should be covered with a plastic film with a polyethylene film. This will exclude the possibility of water leakage from concrete, as well as give it strength. After solidification, the formwork is removed, the lamp is grouped, and the lamp is installed.

Such a material as concrete today applies not only for construction purposes, but also to decorate the interior, representing an original and stylish decorating element. The main advantage of the above-described concrete lamps is not only an unusual design, but also simplicity of self-making. In addition to the lamps due to the ability of this material, various forms are created a variety of vases, tables and chairs, flower pots.

Lighting device using bottle

Suspension lamps from concrete are not less popular. This device is easily manufactured independently. For this purpose, such materials are used as a sand-cement mixture, which has in its composition gravel, water, a network source, electric shuffle, selflessness (designed to work with wood), a pair of plastic bottles (different sizes), a bulb cartridge, and additional devices : Knife, drill, carving tube. First prepare bottles. To do this, cut them down their bottom and drill holes for the carving tube.

The bulb cartridge is fixed with nuts and screws on both sides, so the base for the lamp is considered prepared. The next step implies the preparation of the cement-sand mixture, after which it must be fill in the base (using a spoon) for the lamp, slightly pressed. This method of laying concrete contributes to the removal of excess air, and also provides a uniform distribution of cement.

When concrete becomes solid, plastic is removed using a knife together with self-drawing. The uneven surface of the concrete must be treated with sandpaper, which has a grain value of 120. The last step is to connect the cord to the light bulb and to the voltage source. Considering the mass of the concrete product, you should make sure the strength of the attachment.

Step-by-step instruction of the manufacture of the lighting device

Step 1

It is necessary to free up a package from under milk and trim its bending edges.

Step 2.

Step 3.

Insert a bolt and secure it to secure it.

Important! Concrete lamps must have a fairly sealed case. He should not miss moisture

Therefore, the plots of pillars of the package with the bolt are necessarily embarrassed by the sealant.

Step 4.

Preparation of cement mixture in accordance with the instructions from the material producer. In this case, the main thing is not to add extra water. The finished solution should resemble the dough, kneaded for cookies. At the same time, the mixture should be thoroughly mixed so that there was not a single dry grain.

Step 5.

Important! Immediately wash the container in which the cement mixture was preparing, otherwise, when it grabbies, it will be quite difficult to remove it.

Step 6.

Step 7.

In the obtained billet from concrete for the illuminator, you need to drill holes of one or different diameters.

Step 8.

The light is placed inside the housing, the wiring is made, the connection with the switch is made.

A unique lighting device from concrete is ready for operation!

Concrete lamp using package

Before proceeding to the manufacture of this type of lamps, it is necessary to prepare the following materials:

milk box. An important condition - the package should not pass moisture, otherwise the concrete is lost its strength. The larger the lamp is planned, the larger the package should be selected;
a bottle of plastic in which the light source should be placed;
dry mix for concrete.

First of all, you should get rid of the bending edges of the packaging and install a plastic bottle into it. Next, you need to drill holes in the resulting design. To facilitate this process, it is recommended to make holes in these places in advance using a nail or screwdriver. Then the bottle should be fixed using a bolt, traveled through the drilled holes and consolidation.

To preserve the moisture resistance of the packaging of the connection site, it is necessary to handle the sealant. Thus, we get the foundation where concrete will be poured. The dry mixture is divorced by water according to the rules described in the instructions for it. Here the main thing is to prevent excess fluid.

The consistency of the finished solution should be similar to sand test. Therefore, water should be poured gradually, with each particle of the mixture should be wet. After cooking, concrete should be embedded in the previously made shape, tightly pressing enough, thereby eliminating the formation of empty seats. For a complete drainage product, the package must be carefully shaking.

All tools after use you need to immediately wash, otherwise the concrete mixture will grab that it will make it removing almost impossible. After two days (so much requires that concrete hardened) from the package should be rid of, and bolt to unscrew. To give the concrete lamp originality, it is recommended to make additional holes in it. This will help dispersing the light flux. The light source is placed in the plastic bottle, which is then connected to the switch. The finished device can be placed both on the wall, and hang under the ceiling.

Step-by-step master class with photo

1. Cut the bottom of the greater bottle.

2. Drill a drill or make other ways to open the lids. It is more convenient to work when the covers are dressed on the bottles. Remember that the holes should be located strictly in the middle so that the thickness of the plaffron is the same on all sides. The hole must have such a size so that the tube is free to pass into it.

3. Secure the tube on the bottom of the bottom bottle.

3. Attach the top bottle.

As a result, you should get this design:

4. Refix on the sides of the bottle with screws. This will avoid displacements.

5. Prepare a concrete mix. Fill the form. During work, do not forget to shake the bottle to provide a dense adjacent concrete. Also, it can be raised with a wand.

Council. If you want the surface of the lamp to be smooth, use a thick concrete. Liquid consistency will help create an unusual surface effect covered with sinks.

Council.To pour concrete more conveniently, you can install bottles on a tin jar (as shown in the photo below).

6. After the concrete is tamped, you can remove the screws and spend the trimmer, pressing on a smaller bottle. Observe accuracy so that the center does not shift. Form the edge.

Council. The edge can be both smooth and asymmetric.

After the partial drying of the concrete (depends on the brand used), you can carefully remove the bottles. Do not forget that at this time the lampshade fragile and it is easy to damage it

8. Align small flaws of the surface with sandpaper.

9. Clean the wire with a carton in a ceiling, connect the system to electricity

.... And enjoy the result.

Council. If you do not like the protruding tube, you can cut it with a hacksaw.

In preparation, the master class is Ben Uyeda.

Candlestones

In the case, the ordinary cardboard box from under milk

You can play with forms and size products

To create original crafts, absolutely any techniques will be useful - coins, adhesive tape, plastic cups, baking molds (found on Sayyestohoboken, Signepling and Naver).

Used bottom plastic bottle

And then the master found the use of a simple tin can

A little fantasy, and here you have an original thing

Stylish lamp made of concrete with their own hands

Italian designers have already long delight buyers with interesting things made from concrete. They like to take the material like concrete, whose application is strongly limited, and use it in a non-standard way. We suggest you try to make your stylish luminaire made of concrete with your own hands.

Materials:

Quikrete 5000 concrete mix is \u200b\u200ba mixture of stone or gravel, sand and cement, which is characterized by excellent strength. To mix a small amount required for this project, simply add water and stir.
Socket
Switch
Two plastic bottles (from a two-liter bottle and a small bottle for floor liters)
Thread tube (can be purchased, or take from the old lamp)
Self-tapping screws
Drill (for drilling holes)

INSTRUCTIONS:

1. Prepare plastic bottles. We take the knife and scissors, cut off at the bottom of the bottom.

2. Drill a hole in bottles covers. The easiest way to drill when the plug is screwed into the bottle. The hole should be sufficient so that you can insert a carving tube.

3. Insert the tube into the resulting holes. Use nuts on both sides to fix the position.

4. Hound the resulting design on the bottle.

5. Use screws to stabilize bottles.

6. Mix the concrete. We use a large spoon for filling the space between the walls. After each spoon, we shake the bottles and slightly compress to make sure that the mixture is evenly distributed.

7. Remove the bottles. As soon as concrete thickened, we cut the plastic bottles with a knife and remove the screws. You can cut off part of the metal tube, but this is an optional step. Metal looks canceled.

8. Grind. In this case, emery paper with graininess in 120 was used to smooth sharp corners.

9. All. Finish our lamp. Insert the electrical cord into the hole of the metal tube. One end of the cord is connected to the cartridge with a light bulb, and the other to the electric fork. Make sure that the lamp is well fixed and the mount will end the load.

You can experiment with different bottles.

Equal Bog
What is added to the solution for the fortress
Loft concrete plaster
Silicate brick brick cellar
Is it possible to make a laying in the rain
Casting concrete
Box for switch
How to fill the floor in the garage except concrete
Sealing well from groundwater
Impregnation Color for concrete

Concrete pots for plants

Items can be any shape, different colors (found on Ruffledblog).

A few triangles joined and made a template. And already on it made this subject of the interior

And again on the creation of a pretty thing inspires the usual plastic bottle. Convenient in that it is possible to vary the height of the product

Flowers in concrete! Yes, still stylish asymmetry performed. Such a trinket is good as a gift

But examples of symmetric pots of any shapes and sizes. Looks beautiful, quite modern.

The idea to make a lamp made of concrete painted me when I designed the light in the country, and tried to create lamps in 3D style. By this you implement an excellent idea regarding the creation of three-dimensional design.

I ran into a problem how to pull out ready, the cast concrete lamp from the form you will do. The more advanced your project, the hardest will pull the finished product intact of the form. Also think about weight. You want to use concrete as far as possible, but the more subtle product is, the harder it is necessary to make a form. By the way, I do not recommend using a fane with a thickness of less than 20 mm.

The shape of the lamp from concrete must be made so that all of its parts and side can be dismantled. Sketch the sketch of the shape, slide the sizes, determine the locations of the mounts and the screeds and proceed to the manufacture.

Laccurate:

- In the manufacture of shape, all sides of the formwork should be covered with a thick layer of varnish. It creates a smooth surface that is a rack to water and which will protect the shape.

Wiring:

- It is important to schedule the wire laying. You can use polystyrene foam, having routed it in shape, pour, then drag the wire and install the cartridge

Where necessary, polystyrene foam can be glued to form, as it is easy to remove, as soon as the concrete freezes.

Preparation for shape disassembly:

- Before you get concrete, you must cover all sides of the form by any type of oil.

Concrete and fill:

- I used Sakrete and Quikcrete concretes with equal results. For my lamp from concrete, I used approximately one 80 pound bag. The cement mixer is very useful, as it will allow you to get the correct mixing sequence. It must be done so that the mixture is medium, not too wet and not too dry. As a rule, more complex forms for pouring require more liquid mixtures.

- Make sure the fill will occur slowly when you start pouring concrete. Use a small bucket or a similar container. Use your hands to check and move the concrete to make sure it gets to all the corners of the lamp of the concrete. In addition, if you use polystyrene foam, make sure that it remains on the place that is intended.

- If you use the brand of brand Oscilliating or similar, it is necessary to force concrete to vibrate. Vibration improves concrete fluidity and helps filling out emptiness / air holes that could be in casting. You can notice that the concrete decreases slightly, which is a sign that the emptiness was filled.

- When the form is filled, cover it with a plastic film to hide it during the day or two. If you want to give a fixture from concrete additional strength, it is necessary that the concrete slowly frozen. I usually try to leave a formwork for 2-3 days before trying to remove it.

Removal formwork:

- It is the most exciting, but it should be slow and carefully. Try to start with the simplest sides

Return sides or flat surfaces. This will give you a general idea of \u200b\u200bhow concrete froze. Perhaps you should allow him to stick a little longer. It will be easy to say after inspection of a flat side.

- Some sides of the formwork may need a small use of force, so have a rubber hammer and tapping slightly to force the parties to tear off.

- polystyrene foam can be removed, breaking it with a suitable tool - a screwdriver or something like that. If you are admored, you might burn it.

- Concrete will be still wet, but you can, or give time to him still caress, or start mounting the lamp from concrete and make wiring.

That's how the lamp is made of concrete! Did you think it's hard?

Decorate the garden with concrete lamps

From such a durable material, like concrete, just sin not to make lamps for the garden. The principle of manufacture is still the same: we find an interesting shape, clog the concrete into it, leave a place for the cartridge, we invoice and get a gorgeous and useful decoration for the garden.

If you have a little concrete solution left after filling the form of the lamp, do not hurry to throw out. It can be consumed with the mind. For example, make a ashtray. Pick up an interesting shape and fill it with a solution.

Concrete ashtray

Doesn't the ashtray need? Make from the rest of the concrete here is such a cute miniature flower pot.

Cotton Flower Pot

Concrete lamps are fashionable, creatively and durable. What is interesting, in some cases, especially if you already have cement, such a man-made miracle costs much cheaper than the purchase lamp. Dream, fantasize and incarnate your projects!

Luminaires made of concrete with their own hands. Master class from Ben Uyeda

Let's look to the truth, design lighting can cost considerable money. Instead of spending money on a new ceiling lamp, you can make yourself a whole set of stylish concrete pendant luminaires from one bag of concrete mix and old plastic bottles.

Concrete lamps, necessary materials:

Quikrete 5000 concrete mixture and its analogues (you can also try mixing various concrete colors for a 2-tone effect)
Two plastic bottles (one large and one smaller. Large is selected, based on the desired form of the lamp and its size. If you want the lamp to be smooth, without patterns, you need to choose a container without embossing. An excellent option can be the usual two-liter bottle)
Selfless
Thread Tube 3/8 Inch Diameter and Nuts
Cartridge
Switch and cord (because The lamp will be heavy, use good flexible cables for lifting and conveyor systems)

Instruments:

Scissors
Rechargeable drill with standard chisel diameter 3/8 inch for drilling holes in lids
Grinding circles
Cutting wires

Step-by-step instruction:

Use scissors to cut off the bottom of a large bottle.

Drill the hole in the bottle cap using a drill. It is easier to drill the hole when the covers are spinled on the bottle. The hole should be large enough to insert a metal tube.

Now it's time to connect two bottles. Insert the tube through both covers and use nuts on both sides of each lid so that they are firmly kept in place.

Then use the screws for fixing bottles.

Now prepare the concrete mix and fill out the form. We recommend using a large spoon for filling out the form. Shake and knock on the walls of the bottle after each spoon, so that the concrete is evenly distributed.

We are almost finished! It's time to remove the bottles of the form. Unscrew the screws. You can use hair dryer for heating plastic, making it softer will be easier to remove.

Credit wires and twist them together, make sure the suspension is securely fixed, connect the construction to electricity

Ready!

As it turned out, even from that, at first glance, coarse material, like concrete, you can make a beautiful lamp that will perfectly complement your interior in Loft style.

Lamps from concrete video:

Glass, concrete and LEDs in this product are combined to get a modern, original and stylish lighting element that will become an excellent interior addition. Details of the process of its manufacture in the given master class.

Materials

To make a LED lamp with your own hands, prepare:

LED garland;

Glass cylindrical vase 26.5 cm high;

PVC pipe;

Concrete mix;

Fantasy saw;

Thermopystole and hot glue sticks;

Food film;

Isolent;

Hacksaw;

Stationery knife;

Grinding machine;

Plastic bottle;

Foam adhesive tape;

A piece of plywood or wooden board.

Step 1. Cut from PVC pipe a piece of approximately 13 cm high. This will be a form for the concrete base of your lamp. Adjust it yourself alone. The diameter of the pipe for this project will depend on the diameter of the vase you have taken. Detail does not need to handle PVC, it will become the outer wall of the form for a concrete base.

Step 2. From concrete to make the cylindrical base of the lamp with a blank recess inside. For its manufacture, you will need a small plastic bottle that needs to be trimmed in a height of about 2 to 3 cm below than the outer part of the form.

Step 3. In the upper part of the concrete base, the lamp should be a small rim, to which the vase will be installed. To make it rush from the inside of a piece of prepared PVC pipe foam adhesive tape.

Step 4. The bottom part of the form cover the food film and fix it with a tape.

Step 5. Inscribe a concrete mixture with water in the ratio indicated by the manufacturer of the mixture.

Step 6. On a piece of plywood, put the prepared part of the pipe. Right in the center, put it inverted upside down, cropped and empty plastic bottle.

Step 7. Gradually, start pouring a solution of concrete into the form. Periodically knock on the PVC pipe wall with a rubber hammer so that the parts of the solution settled to the bottom and did not rise. As the material fills, the plastic bottle can be pushed up. Take a nail and lower it to the bottom.

Step 8. Take the grinding machine and with it, create vibrations, for shrinkage of a concrete solution. During this process, continue to keep the bottle of the nail.

Step 9. Leave the entire design until complete drying. This process can take several days.

Step 10. The resulting concrete base for the lamp you need to get out of the form. To remove the concrete layer from the bottom of the bottom part, gently knock on it with a hammer.

Remove the form will be easy if you have previously smeared it with oil. If concrete you poured into an unprepared form, make two small cuts on it with a hack or saw, and remove the PVC part.

Step 11. Collect the resulting workpiece with sandpaper or grinding machine using the nozzle with graininess 60.

Step 12. At the top, drill the hole to turn it into it, connected to a fork or other power source. From the bottom of the bottom, make a small groove under the wire. So the base of the lamp will stand on a flat surface steadily.

Step 13. Grind the wire into the harvested hole and fix it in it using hot glue.

Step 14. Connect the LED Garland to the Wire. Carefully send it to the vase. This is pre-wrap the product to any cylindrical subject. Cover the concrete base with an improvised glass cap.

For the manufacture of the original lamp with their own hands, we will need:

1. Cement + sand.
2. Electric wire and cartridge
3. Plastic bottle made of mineral water on 2 liters and more thin by 1l.
4. Tube with carvings and nuts. This tube can be purchased in lighting shops, or get from the old chandelier.
5. Selflessness

Initially, it is necessary to choose plastic bottles from undermines or any other drinks. The bottle of 2 liters will serve as an external form of the ceiling, so if a bottle with different embossings, they are imprinted on the lamp. A 1 liter bottle must be chosen without embossed (smooth), but such a diameter so that an energy-saving lamp can fit inside.

After they decided on the choice, cut off the bottom of the 2 liter bottle.

In the covers, drill holes for a metal tube

Nuts roll the covers on both sides so that they keep in place. The distance between the lids should be two more than the distance between the walls of the bottles.

Use self-tapping screws to secure the form.

Prepare a cement solution (finished cement-sand mixture or sand cement in a 1: 2 ratio) and fill out the form. Concrete, under consistency should be thick, then the surface of the lamp will be smooth. If the solution is more liquid, then many small shells will appear on the walls.

It is necessary to take into account when the solution is more dense, it may be loosened, and emptiness will form. Therefore, it is necessary to ram with a solution with a wand, after each swelling. You can use the primed vibrating means (handmade massager, etc.). After the solution is covered and tamped, you can unscrew the screws and once again gently tumble so that the center is not disturbed.

After the cement is dry (1 week in the shade), remove the bottles, only the act must be neat, because cement, still fragile and easily damage the front part.

All the edges of the lamp process the sandpaper.

It remains only to connect the cartridge to the lamp. I want to note that hanging the ceiling on the wire is very risky, and sooner or later the wire can be transferred under weight. Therefore, I recommend using a decorative chain for hanging.

Decorative lamp made with your own hands, ready to decorate the interior.

You can do two-color lamps. For this purpose, cement solutions from white and gray cement are prepared in different tanks. After that, they are mixed with each other for a few seconds (but not allow mixing to a homogeneous color), and is poured into forms. Additionally, you can use colored dyes for concrete on the technology of marble from concrete, and make bizarre patterns.

Good luck to you in your work.