Homemade 6 caliber barrel from the pipe. Sniper rifle from PVC pipes

Question: What is it?
It turns out that it is homemade weapons managed by Sony PlayStation, created by the liberation army of Syria.
I am not a specialist in military equipment, but even to me, LAMERA, in this it becomes clear that the rebels were able to do what the bright heads of the military, inventing combat terminators could not think.
And just a PlayStation, a Chinese calculator, a car battery, a bunch of wires and two strange pipes, apparently, and shoot enemians.
This is what I am all what, although here on this site we try and not touch politics, well, not our, but when the media is breeding people, they say such as they are struggling with the hated government, I want to smile for some reason.

And the most interesting thing is that the script is repeated, nothing new. In Libya, everything also took place in the same way.

If they remember the news of hostilities in Libya, then the most popular weapons did not have a kalashnik, but old Japanese pickups, in the body of which installed a machine gun. And all this was done in small workshops, who were engaged in the repair of tractors and cars before the war.

So as not to be unfounded, I would like to bring the link to the source, but there is no such. This is an all analysis of the situation and quite possibly erroneous assumptions, but continue further.
Somehow in one interview showed how some master makes his cars. Before creating another masterpiece, he browsing Hollywood militants and already on the basis of them creates their miracle weapon. The main thing is that it looked more troubling and conquered.

By creating another armored vehicle, the mechanic complained that the Chinese pickles were very unreliable and when they were inspired by armorphestin, they sometimes could not be touched from the place, and they could not go on them, so it was just before journalists.

Yes, and all these homemakes are not designed for fighting. Well, think about how the rifle can be made from the plumbing pipe, and even so that it shoots.
Although, in such super techless weapons from the pipe, the system itself can recognize the enemy, to restore the sight and shoots. 21st century however!
The main thing is that the pipe for such weapons was from under hot water.

Today we will look at the unique design of the gas gun, which works on alcohol. This is a miracle of technology from PVC pipes and various components for them. The device works on liquid fuel, the author uses isopropyl alcohol. However, almost any combustible substances can be used, ranging from alcohols, ending with cologne, sprays or even gasoline.

A feature of the gun is that it does not need regular refueling after each shot. The power system is designed so that on one refueling you can make 40-50 shots. Special sponges are installed inside the gun, thanks to which the alcohol evaporates, these pairs are subsequently ignited.

The system is equipped with forced air supply, it makes the gun more powerful, as more air means higher compression. Air is injected with a special pump, it is enough to make 6-10 presses for a shot.

List of materials and tools used by the author for homemade:

List of materials:
- 30 cm 3/4 "PVC;
- 30 cm 1 1/4 "" PVC;
- 1 1/4 "" x 3/4 "" sleeve x 3;
- 1 1/4 "" Tee X 3;
- 1 1/4 "" adapter with a threaded compound;
- 1 1/4 "" ELBOW;
- 1 1/4 "x 1" "Threaded sleeve;
- 1 1/4 "" Threaded plug;
- 1 "" Threaded plug;
- 1 "" x 3/4 "" sleeve x 2;
- Lighter (piezoelement);
- paint at its discretion;
- kitchen sponge;
- thin rod of steel;
- cheap pump for pumping balls (or similar)
- Optical sight (optional).

List of tools:
- adhesive gun;
- drill;
- tape;
- metal hacksaw;
- pliers;
- Wires.

Gun manufacturing process:

Step one. Production of adapter
First of all, it will be necessary to make an adapter, thanks to which the blowing can be connected with hand. This adapter is made from the Squa PVC pipe. The problem is that this adapter should not pass the air and expanding gases into the handle, so it must be sealed. To solve the problem, the author rows one side of the tube with a tape, and then inside pours hot glue to about ¾. When the glue will cool, you will have an excellent cork.

Step second. Preparing the workpiece and glue the basis
Pick all the necessary blanks, like the author in the photo. Then they will need to just glue with good glue. As a result, you will have an almost finished rifle, it remains only to establish all the necessary "authorities".

Step Three. We prepare a place under the "trigger"
As a chicken for this gun, a piezoelement is used from a lighter, which clicks when clicking and emits a spark. Under it tediously drill a hole in the handle. The author apparently did not have a drill at hand, and he decided to pay plastic, heating the nail of the burner.

Step fourth. We produce piezoelement
Piezoelement can be found in many lighters, very often it is found in pocket, as small in size. It will take two long wires to solder if there is no. One wire is soldered to the already existing, and the second to the lower metal part. Wires must be very well isolated, since the spark can punch, not reaching the destination.

Pitch fifth. Breeping piezoelement
Install the piezoelectric element in the place prepared for it and go well with hot glue. Since it is pressed quite tight, it is extremely desirable that a piezoelectric element be resting on something.

As for the wires, they need to be brought into the combustion chamber. Run ends for a couple of millimeters so that when you press on the piezu between the electrodes I spark. Secure the wire with hot glue outside for tightness.

Step six. Production of "heat sink"
Assigning this detail I could not understand. It is quite possible, it is just an element of decor. To make this item, you will need a piece of PVC pipes in diameter more than a blow. Print the template that the author attaches and stick it to the pipe. Then simply impert the holes. To remove uneven edges, use a sharp knife and sandpaper.

Step seventh. Krepim "Heat sink" on the blow
There are traffic jams on this detail, they will serve the holes in the diameter in the diameter. Then put on the "heat sink" on the blow.

Step eighth. Arrangement of the air supply system
For air supply, you will need a small pumping for balls and other plastic. Secure it on the casing of the rifle as the author did. You can fix with hot glue, carefully insulate the glue the pump in the gun in the gun. The pump must be equipped with a check valve so that the pump does not release air.

Step ninth. Silencer for rifle
Of course, a professional sniper rifle must have a silencer. The author makes it from two PVC pipes of different diameters. At first, we take the pipe of the small diameter and drill in it a large number of holes. From the diameter, the location and quantity of the holes will depend on the sound of the gun when shot. This tube is installed inside the tube of a larger diameter, which has a plug on both sides.
Clean the holes from irregularities using sandpaper.

Step tenth. Manufacturing of the stop
When the rifle is shot, there is a return to the shoulder, so there should be a good support. We take two PVC tubes, heating the burner and make them flat. Well, then we welt them under the desired angle and fastened to the cannon.

Step 11. Tactical Rails
Secure tactical rails on a rifle for attaching sight and other devices. The author for these purposes used hot glue.

The weapon presented in the photos is not a supervalted sniper rifle at all. On the contrary, this is a gun that can be made from a piece of conventional tap pipe, and to use it, sometimes a small boat was even required. But with the help of such a device, you can beat all the hunting records, without exaggeration, knocking down the ducks with dozens.

A manual firearm in Europe is known from the Middle Ages, and all this time it was used not only in the war, but also for hunting. It was in pursuit of the game hunters used the greatest hand "guns" of all ever existed in the world.

Still a century ago hunting on wild birds, mainly on ducks and geese, gave food not only on the tables of aristocrats, but also was an important help for ordinary people. It is the hunters on waterfowl feathers and invented how to kill them at once dozens. The secret of success is hidden in a long trunk (up to 3 meters) of a large caliber (up to 5 cm). Such a smooth-bore rifle shooting a shot, previously called the "clarition" or "Gun or Punt Gun).

Unique rifles hunters often did their own hands. As a trunk, a Street Lantern Post could serve, and even a sufficiently thick tap. The trunk was attached to the handle-butt. True, from such a weapon to shoot from the shoulder, few people drowned - dislocate guaranteed. The main effective way of hunting is to firmly attach a "clarition" to the boat and lay down the flock of feathery on it.

Successful hunting with the world's largest manual weapon looked as follows. The hunter, sitting in a boat with a "clarition" installed, slowly and quietly made his way among the thickets of the cantham, listening to the sounds. He was required to "calculate" the location of the flock of ducks. Approaching close enough, he directed the nose of the boat in the direction of the flock and kept the pennate. Birds rising in the air stunned the sound of a shot and immediately hundreds of lead crushers, common weight in the shelter, killed them. After a successful shot, the hunter could well pick up with him until sheltered ducks. True, not all birds were suitable for food, because The fraci in meat could be too much.

Too successful hunting for feathered, naturally, could not but affect their quantities. The massive genocide of ducks managed to stop, only forboving the "clarification" at the legislative level. So, in the United States, a giant shotgun was "banned" in the 1860s, but for a long time was widely used by poachers. And in the UK, the "clarification" is used so far, the truth is the caliber is not more than 44 mm.

Huge shotguns are "clarifications" were produced in the Russian Empire on weapons plants in Tula, Klimovsk and Izhevsk. And in the next review you can learn about