Metal carved platbands on the windows. Instructions for finishing window slopes with metal. How and what to fix platbands in a wooden house

Galvanized steel platbands covered with a layer of polymer coating are becoming increasingly popular in the construction of housing and non-residential buildings. This type of fitting elements is intended for upholstery from the outside of window and doorways. The EUROMET website presents high-quality dobors and platbands, which you can at an affordable price wholesale and retail.

Metal framework for windows and doors of all sorts of colors:

perform a decorative function, give the building a completed view;
close the slots between the window / door and the wall, preventing drafts;
increase the degree of noise and thermal insulation.

Steel challenges are perfectly combined with metal. The building decorated in a single style looks harmonious and exquisitely.

Why it is worth buying metal platbands

Finishing slats for edging window and door openings are made of plastic, wood. However, metal products have a number of advantages in comparison with analogues from other materials:

wide selection of color solutions;
long service life;
resistance to ignition;
attractive view;
easy to care.

The feature of the platbands - in the individual manufacture of four slats strictly according to the size of the opening. Instead of the bottom can be installed. Installation is carried out on the spot.

Tubes on the windows in Moscow from "Euroma"

The company produces shaped elements from high-quality galvanized steel with a thickness of 0.5-0.7 mm. Metal products are protected from the effects of unfavorable natural conditions by several coating layers:

galvanized;
primer;
anti-corrosion protection;
polymer layer;

Prints are made of steel of domestic production. Product quality meets standards and that.

Why it is worth ordering fit products

Price of platforms available due to its own production. You do not have to pay extra mediators.
We work for an individual order, we will help you choose products, ideally suitable for the facade of color and size.
In Moscow and the region, we organize our own delivery. In other cities of Russia, send by commodity and transport companies.

If you are looking for where to buy ready-made platbands on the windows, contact Euroms. We will create facade elements as soon as possible and offer additionally accessories for fastening.

Hide

The platbands are needed not only to decorate the window, giving the facade of the designer species that allows you to implement any ideas, but are decorative protection of seams from the freezing and negative impact of natural phenomena. Metal platbands are high-quality, reliable material capable of protecting the window seams well, make them hermetic and decorate the window itself.

Coolband as decoration

Many seen vintage wooden buildings decorated with carved platbands outside. Such decorations are made manually, they may have a rather complicated drawing, turning a boring house into artwork. A piece of fairy tale can be created using and metal platbands on the windows. Any patterns can also be cut on them, but, unlike wood, metal is a more reliable and practical material that can withstand any loads.

If wooden products are poorly tolerated, you need constant care and are not too long, then metal analogues are deprived of these shortcomings. It is enough to use a stainless metal or regularly paint the product. Tubes on metal windows can completely replace wooden elements. You can independently cut the desired pattern using flat metal sheets, while, unlike working with a tree, you do not need to have a thread skill on it or have special tools.

With metal sheets, it is much easier to work: they will not require drying, special conditions for this, they will not require the use of lacquer, which fades in the sun, because of which it has to update it. After installation, metal platbands will not need additional care, perfectly fit into the design of the facade. Installation of metal slopes will also not cause any difficulties.

Features of rough material

The thickness of the suitable sheet of iron is from 0.40 to 0.70 mm. Such sheets at the factories produce rolls up to 50 meters long. The width of the product is 1.25 m, it is not always possible to paint the sheets, as you can buy an already painted product of the color and shade you need. In order for the material when transporting not damage, it is protected from scratches with a special film, which can be removed if necessary. The metal is quite durable and flexible, so it does not cause difficulties when working with it.

What if the wall is brick or from the block?

Not always the slopes are mounted on a wooden structure - sometimes the owners want to make a more decorative brick house. To do this, you can also use metal slopes. The device of metal slopes in this case is no different, but the use of nails will have to be abandoned.

Before mounting in the walls, it will be necessary to drill holes for dowels. Use preferably materials at least 6 cm long, otherwise the risk of design and from the wall will appear. After the holes are ready, you need to insert plastic blanks in them. In the mounted slopes, screwdrivers are also drilled in advance: make sure that all holes strictly coincided.

After everything is ready, the design is placed in its place and is screwed. Working with the slits occurs in a similar way. You can use silicone sealant: colorless will be most convenient, since it does not have to pick it up, but if the wall and slopes are white, you can apply white. The installation foam is not recommended. It cannot resist moisture, requires protection from weather conditions and has an attractive appearance.

Make decorative and functional platbands on metal windows you can easily. This will not need to have an expensive tool or carpentry skills.

Today, buy plates on windows in Moscow offer many companies. They can be purchased as standard, but can be ordered individually. Of course, while the cost of the product will increase, but they will mostly satisfy the needs of buyers. The market suggests to buy window platbands from wood, but the demand for them in Moscow gradually decreases. This is due to the high-cost material, as well as with the increasing popularity of metal-plastic windows. Inexpensive costs of PVC, material easier in care. Affordable prices and metal platbands on the windows.

Omnipresent plastic

Sale of platbands on the windows of plastic beats all records. Here are their advantages:

beautiful design, uniform color and the wealth of color solutions, is available imitation "under the tree";
in Moscow, you can order products of any configuration;
resistance to aggressive external environment, moisture, temperature fluctuations, insect damage;
deformity of deformation;
long service life;
simple care;
low weight;
no need for additional processing or finishing;
low prices.

Buy plaque on the windows in Moscow is very simple, just as easy to install them. Plastic products on the adhesive composition in a short time are mounted. There is also the opportunity to order inexpensively where you can hide the wiring. If the house is separated by vinyl or metal siding, then they will need special plastic platbands on the windows, the price of which is slightly higher than the usual. From simple models, they differ in a thoroughly thought out installation system. Higher cost - on non-standard profiles, such as carved.

Metal profile

Metal platbands on the windows - a good choice! This finish is practical and durable, beautiful and affordable. And carved platbands on the windows, the price of which will be slightly higher from the value of standard models, will create a unique appearance of any home. They make them from thin collecting non-ferrous metal and decorated in any color solution. To buy window preferred, rather than from PVC: they have the same advantages plus possess additional benefits. For example, they are not lit, resistant to mechanical damage. The only drawback is that their installation will take longer and will be a bit more complicated, so it is better to contact the specialists. Also, masters need to be performed correctly to measure the openings, because if the plastic is easy to adjust to the desserved dimensions on the spot, then cut a profile from the metal at home is quite difficult.

What products to give preference to solve the buyer, having studied well everything for and against.

Metal-plastic windows are a multifunctional contemporary product for glazing window openings. The final stage of the installation of plastic windows is the finish of external slopes. For this purpose, various finishing materials can be used: plaster, paint, PVC panels, drywall, but most often metal finishes are made. Installing the metal slope to the window can be done with your own hands.

The function of slopes

Finishing windows outside the discovery from metal performs decorative and protective functions. By installing the slopes on the windows with your own hands, you can close the installation seam and thereby protect it from the effects of precipitation and direct sunlight.

Metal slopes perform a protective and decorative role

Mounting foam used for sealing the junction between the frame and the window opening is a porous vapor-permeable substance that passes through itself moisture from the room. As a result, moisture and condensate settle on the surface of the slopes of windows, which leads to the formation of mold and the destruction of the integrity of the structure. Moisture from the street can penetrate the mounting seam and cause fogging and freezing windows in the winter.

By installing metal slopes on the windows, you can not worry about these troubles, as the metal is durable, durable and unpretentious material with high operational indicators.

Purpose

Metal external slopes perform several important functions:

The metal finishes should be installed immediately after mounting the windows to exclude the absorption of moisture by mounting foam. If it is impossible to produce in the near future due to work on the facade finishing, the mounting seams on the windows can be temporarily close by polyethylene.

Advantages over other materials

There are several types of finishing materials using which, you can give the window to the window to the final appearance. This is plaster, plasterboard, plastic and paint. But in its technical characteristics, none of these materials can be compared with metal slopes. Solving the question, how to make slopes, it is necessary to study the characteristics of the finishing materials.

The polymer layer of steel slope protects the product from rust

When using plaster, you need to be prepared for the fact that over time the plastering layer cracks. Moisture getting into the resulting slots between the window frame and the plastering layer can cause the appearance of mold.

Plasterboard as finishing material for slopes is suitable only for internal works. Even gvlv plasterboard is not able to withstand direct impact of atmospheric precipitation. In a short time, it will swell, lose its appearance and collapses.

The use of plastic panels for finishing outdoor slopes leads to the fact that plastic flashes in the sun and acquires an unpleasant yellowish tint. And with a sharp decrease in the air temperature, plastic becomes fragile and can lose its integrity after a minor mechanical impact. Therefore, plastic is better to apply to finish internal slopes, especially in the kitchen room.

Metal slopes are not exposed to atmospheric phenomena

The advantages of metal slopes are obvious, since the material of their manufacture is galvanized steel, which at the production stage is covered with a protective polymer decorative layer. It protects products from corrosion and rust.

Pros and cons of the material

Despite the fact that the outer metal slopes are more expensive than other types of finishes, their positive qualities. This drawback is covered with interest:

It is recommended to mount a noise absorbing tape with slopes

Of the minuses, you can note the high cost and the presence of sound effects arising from drop drops or hail onto their surface. You can cope with this, if used when installing metal slopes, a special noise absorbing sealing tape.

Another minus of the metal slope is the impossibility of its installation in the opening of arched form.

Preparation for installation

Installing modern metal slopes on the windows with your own hands will require the preparation of special materials and tools for carrying out this type of work:

metal sheets;
level;
fasteners;
mounting foam and silicone sealant;
screwdriver and bits;
laner knife;
scissors for metal;
roulette.

Surplus mounting foam need to cut

The preparation of the surface is that construction dust and contamination is removed from it. Surplus of the mounting foam are cut with a painting knife, and the seams and joints are processed using silicone sealant. Installing metal slopes on the windows with your own hands should be made after drying the seams.

Sequence of work

Installation of metal slopes on the windows involves performing memory. The width and height of the product will correspond to the internal and external parameters of the opening. The manufacture of the upper, lower and lateral metal elements is made by cutting them out of the harvested metal sheet in accordance with the obtained measurements.

At the second stage of the work, a low-rise installation occurs, the horizontal position of which is controlled by the construction level. The lower joint of the wall and the window frame is equipped with a special thermal insulating material and a diffusion tape for noise reduction and moisture protection..

First you need to install

During the attachment of the mounted, the mounting foam is applied to the window opening and on the sow from the inside. So that it does not be bent due to the expansion of the foam, it is tightly pressed for a while. After the tint is fixed, start assembling metal slopes.

Before installing metal slopes, you need those places in which they will contact the window frame, handle the sealant.

Metal slopes are fixed using mounting foam

First, the side elements are installed in compliance with the desired slope from the inside out. The upper and lower parts are adjusted by knife depending on the level of inclination.

Side elements must be installed in a vertical position and attracted with screws. The upper part is adjusted under the side elements. It is leveled relative to external corners and is fixed with self-draws.

At the final stage, all seats are processed by sealant.

When installing the slopes on the facade of the professional flooring, horizontal jumpers are used

In the case when the facade of the house is trimmed by a profile, when finishing window openings, it is necessary to use horizontal jumpers. It is a side shelves made from the proflist, which on the one hand are fixed to the wall, and on the other - to metal profile. Steel platbands give the facade completion.

If within the house you can allow a variety of interior design options, then outside the possibility is significantly limited. In addition to the original color of the painting of walls or material that can be separated, it is difficult to come up with something else. In the old days, this question was solved with the help of platbands on the windows, which served as a real decoration of any home, showed the mastery of the host or master of the Creator. Such a tradition reached the present day, although partly and changed.

Features

The platbands were traditionally used in wooden houses. They helped decorate the windows and effectively add the composition of the facade. With such elements, you can enlarge the window opening visually or reduce it. Initially, the design of the house was given great importance, each owner sought to show the individuality of its structure.

With the help of platbands, you can achieve a different effect.

Visual decoration of the house, giving it a special color and charm, the opportunity to highlight it from a number of standard.
Giving the window of another form with the help of platbands of different configurations, values \u200b\u200band pattern. The small form window can be made great if you use openwork designs.
Creating a holistic composition of all elements of the facade. The use of identical platbands on the windows and doors allows you to make a completed home design.

With the help of platbands, the window openings can be protected from the negative impact of environmental factors.The seam between the frame and the house can have small gaps, in which moisture falls during the rain, and the dirt is clogged with strong winds. All this contributes to the development of harmful microorganisms that destroy the wood. Therefore, the frame begins to pass air, which significantly reduces its thermal insulation qualities.

The platbands are closed by the same gap and do not allow you to get to it or moisture or dirt. In addition to the obvious advantages of the platbands there are also negative factors. You should also know about them by planning the installation of such parts on the windows of a wooden house. These include several factors.

Active reaction of decorative elements on weather conditionswhich contributes to damaging the material. So that this does not occur, it is necessary to treat products with a special substance, which significantly increases the service life of the platband.
The need for constant care.Tubes should be painted annually or varnished. If this is not done, then the product begins to crack. As a result, instead of decoration it will only spoil the appearance of the house.
When planning the manufacture of platbands, you need to choose the correct material for them. If this is not done, it is unlikely to succeed proper effect. If it is difficult to cope with such a task alone, it is better to enlist the support of the professional.

Now there are products from modern materials that may have the most diverse appearance. In this case, care is much easier. They are not affected by the environment, they are not terrible moisture and even cold. They do not crack from time to time and reliably serve for many years. For connoisseurs of aesthetics, this is not the best option. But for those who want to decorate their home, diversify the appearance of the facade, this is what you need. It is such a product that will create the necessary appearance, and it will not require increased attention.

Views

The species variety of platbands is huge. It lies in the drawings that are applied to the tree, the form of the product itself. In addition, modern technologies allow you to create window decorative elements from a wide variety of materials.

If we talk about the appearance and patterns, then several types are distinguished.

RubberBy which you can create elegant and beautiful images.
Openwork which are characterized by bizarre forms capable of selecting the hand of the wizard from other options. They have the form of a solid cloth on which the pattern creates.
Carvedcapable of creating a unique appearance and protect the window opening.
Overheadwhich have a design complex form, as the carved element is superimposed on the plate. Such products can be created separately or as an ornament for available platbands. In this way, it is convenient to update the already available decorative elements.
Simple, which have a smooth surface. They have no patterns. In shape, such elements may be different (with rounded edges, smooth, narrow and wide).

When choosing a material for a platband, it is important to understand that it should serve the protection of the window, and therefore it is not worth a hurry with the purchase of material without knowing its features.

The most popular decorative platbands are made of wood. They fit beautifully in the design of the facade of a wooden house, so still do not lose their relevance. So that such details serve as long as possible and correctly performed tasks set before him, they need to be processed correctly.

If you do this processing, the tree will not rot, the moisture will not cause him damage. In order for the wooden platbands for a long time remaining beautiful and decorated the house, they are best open with varnish. To date, there is an alternative, which can replace both varnish. This is a substance based on wax. Both options retain the appearance of the tree, give it a more elegant appearance, significantly extending the service life of the platbands.

In addition to wooden, there are still decorative products on the windows made from other materials.

MDF

MDF panel has a laminated coating. Usually such platbands have a form of a plank with a pattern under natural wood. Flowers and textures can be quite a lot, you can easily pick up the frame for the window opening of any wooden house.

Plastic panels

Products from plastic panels are considered the most modern, because they are easily and convenient to care for them. This option can be chosen by those people who have no time to care for their own home, but they want to see the beautiful structure that you can admire. Most often, plastic platbands are used for metal-plastic windows. However, the latest trends have shown that they are well combined with wooden structures, fully fulfill their task.

Polyurethane

Polyurethane platbands can also be used on windows in wooden manors. They are distinguished by light weight and ability to deformation, which makes it possible to encourage them in the right direction. It is quite simple to install such elements, and the timing of their operation will delight anyone.

PVC

PVC products are considered the most common to date. You can find a variety of such casters in white and a wide variety of color variations. Install the product from the street, it easily copes with any weather conditions. The advantages are the abundance of colors and forms that can be given to such a material.

Styrofoam

Polyfoam can also be used as a material for the manufacture of platbands. For this purpose, a dense variation is suitable, which will not differ as the same strength as a metal platband. This is the reason that this kind of product is not used in countries with high seismic activity, where even the slightest oscillations of the earth's crust on the windows would appear. The color of such decorative elements is white, but with the help of paint, you can change it, picking up under the estate.

Metal

There are still metal platbands that are considered the most qualitative in terms of protecting the window from environmental impact. For their production, metal sheets are required with a small thickness, which makes it possible to produce the structures of various shapes. The advantage of this option before the same plastic consists in the stability of the material to mechanical damage. This makes the service life longer.

To impart fresh and interesting appearance, iron products can be painted, and the appearance of the house will immediately transform. The popularity of this type of product is also created by price, which is rather low, taking into account all the positive qualities of the material.

To install metal products, it is extremely important to measure the window correctly so that without any work to install them. If there is a desire to establish unusual metal platbands, you can order carvings that will be interested in looking at the facade of the house.

Inside, it is also possible to provide something like that to create a holistic image of the structure on each side. Usually, external and internal platbands are quite different from each other. This is due to their functions. Facade decorative elements should combine aesthetics and quality. Otherwise, they would hardly be used to decorate the room.

Sketches

The use of platbands on the windows of a wooden house should put the structure completed, to make it more beautiful. Therefore, simple glossy panels are unlikely to fully cope with such a task. It is best to choose carved elements or make them yourself.

With the complete absence of skills to work with wood, it is better to choose the first option. But for lovers of manual labor and original products, the ideal solution will be the work on the sketch.

First of all, you need to decide on the selection of the pattern, which will be on the platband. For this you can use books, Internet. You can come up with a sketch yourself. As soon as the perfect option is found, you need to increase it to a natural scale and print. All patterns should be cut and are accurately transferred to the cardboard, with which the main job will be. Detail of the cardboard must correspond to one part of the platband.

It must be placed on a piece of wood and circle with a pencil drawing, which will continue to go clipping. To correctly pick up the drawing on the platband, it is worth making the drawing of the whole house using all decorative elements. If the finished option turned out to be beautiful, and all parts are harmonized with each other, then the idea was chosen correct, you can proceed to its embodiment.

For some houses, simple platband options are suitable (for example, if the estate was provided in the style of minimalism during the construction).

If there is a desire to create something ambitious and beautiful, you need to choose wide planks and start creating. For the manufacture of good platbands, it is best to choose a pine (especially those planks where there are practically no bitch). As tools that use in the process of work, you need to have a smooth starter logo to manually cut all the necessary parts. In addition, it will be useful:

feather drill with a diameter of 12 mm;
screwdriver;
sander.

The active process of working on platbands on the windows begins immediately after the whole drawing is transferred to the future product. First, they are taken for the inner part of the picture, making openwork details. To make the process more convenient, using the drill you need to make several holes in the board, which will be located on the pattern circuit. Drinking the pattern itself is made using an electrolybiz, which is inserted into the finished hole. Next, simply lead along the contour, cutting the necessary part.

As soon as the inner part of the picture is ready, you can proceed to the outside. You need to do two inscribed (at the beginning and at the end of the product) to make it easier to navigate in work.

It is important to pump it with one movement, without stopping, so that the finished platband turns out the most figured. Such a sequence of actions is inherent for each part in the overall design of the coating on the window canvas.

The resulting product is still far from what should be. Therefore, you need to use a grinding machine, clean it all irregularities and roughness. Only after this stage part of the structure is treated with special solutions. After that, it can be ready to use or paint for a more original appearance.

How to make your own hands?

The manufacture of platbands for a wooden house with their own hands is much more interesting than a banal purchase of such elements in the store, because you can choose the drawing that will answer the spirit of the owners themselves and emphasize the design of the facade desired by the residents of the house.

You can pick up a wide variety of options.

Flat cornice. In this case, the platbands symbolize the wealth and style of the house. Use them for beautiful and elegant buildings made in strict style.
Arched prime.The platbands that are supplemented from above will be the perfect addition to the window openings that have a non-standard rectangular shape, but the round upper part.
Using patterns and threads. The platbands of such a plan will be able to give home elegance, make it unusual and beautiful.
Using attached elements. These are the details that the product is complemented after it is performed. In this way, you can add something that did not work out initially. The use of hinged parts makes the design volume and more interesting.

When going to make platbands yourself, you need to choose the correct material for the future product. It is important to pick up the color, based on the colors of each composite part of the house, find the perfect option to decorate this product. You can take advantage of the offers that are in construction stores and buy a ready-made option, which is much easier and faster. Installing such a platband will be simpler, as it already provides all the necessary fixing elements, and simplicity is provided.

If there is a firm intention to do everything yourself, there are several options for the manufacture of beautiful platbands.

Slit option- The product in which there is an inner drawing and beautiful border. Traditionally, such a platband has white or light color, it is attached to buildings with a contrasting tint of walls.
Overhead type thread It is created by cutting into individual elements and gluing them or navigation to a solid wooden canvas that will serve as a platband. This design of the design makes the drawing volume and at the same time air. With such lining, any platband can be decorated.

If the house already has carved platbands, but they require repair, you can remove the whole or part of the design and renovate it. If there is no way to repair some part, you can completely remove it, replace the new one. If there is a need to make fully new designs on the windows, you need to prepare all the necessary inventory in which:

lobzik;
plane;
schlifmashinka;
milling cutter;
sandpaper;
planks with a cross section of 30x100 mm.

This is what will be needed to create simple plaque. To start work, all future details are necessary to treat the plane, and then with the help of the cutter, give them a finished look. In order for the product a presentable appearance, it is squeaked by sandpaper. This is the easiest option of making platbands that does not require large skills and skills. If there is a desire to do something original and beautiful, it is worth choosing a carved type of product. For such work, you need to add more curly chisels to the main inventory.

For the manufacture of a platband, you can use two technologies (usual and overhead). At the first embodiment, the pattern is on the platband itself. When the second is made on an additional bar, which is then fastened on top of the main element.

For the first attempts on a tree cutting, it is better to choose the most simple design options so that you can easily cope with them.

If the platband is made by an overhead option, the work process will go in such a sequence:

processing of slats with a plane;
preparation of overhead planks with a thickness of at least 10 cm;
formation of the future drawing on the cardboard and its cutting;
transfer of drawing from a stencil on the patch bar;
the drill need to make holes throughout the figure;
with the help of the chisel, you need to finish all carved elements;
grinding finished lining;
fastening overlaid on a casing with glue or self-drawing;
collecting every detail of the platband;
installing the finished design on the window opening.

Installation of finished designs on the window can be carried out using nails, screws or glue. Most often, platbands are made from the sides and above the window, sometimes there are lower parts of the design. To properly and aesthetically docile the edges of each part, they need to trim at an angle of 45 degrees using a hacksaw or stub. If the wall is concrete, the dowels and screws are needed for reliable attachment.

To beautifully arrange a window of a country house, you need to know not only the basic information, but also some nuances, without which it may not be possible to create a truly wonderful sample of manual creativity. These points include several factors.

When choosing boards for making platbands, it is better to give preference to those options whose thickness will be equal to 3-4 cm. With thicker materials, it is much more difficult to work, especially figure cutting.
Starting the work on the carbar carving for the first time, it is worth taking a simple pattern and polish it, after which you can try something more complex and interesting.
In addition to the thickness of the tree for platbands, it is worth taking care of the correct selection of its width, because the main purpose of these elements is not so much in the decor, but in the protection of the window.

The platband must overlap the opening between the wall and the window frame.

When planning cutting out any drawings, it is worth it to position them on the board, so that they go along the fibers of the tree, and not across.
Selecting the drawing for the first attempts of the carbar threads, it is worth looking at something large with convex forms, which will not be difficult to do, and the result will delight with its beauty. If you choose a small ornament, in the event of an unsuccessful outcome, the platband will look inactively. It will spoil the impression of the external facade of the house.

Making platbands on the facade of the house - the process is long and requiring perfection. Therefore, it is worth a clearly appreciate your strength before being taken for work. The choice of a suitable material, the desired pattern, a successful implementation of it in life, is only a floor of the case. Next, an equally labor-intensive processing process is followed so that they serve long enough, while performing their functions qualitatively.

The final stage of work with these decorative elements is their installation. At each stage there is a certain choice, the result of all work depends on its adoption.

Beautiful examples

Planning the manufacture or purchase of platbands for a wooden house, it is worth choosing an option that is best suited for a particular structure.

With the help of the Internet and other sources of information, you can see the sketches of the drawings, already ready works, which will give food for reflection.