Ball valve Danfoss JIP-FF. Ball valve steel JIP-FF fl Danfoss Ball valve flanged jip ff

JiP Premium all-welded ball valves made of carbon steel with standard bore

JiP Premium ball valves are two-position shut-off valves designed for use in heating and industrial installations for liquid media. Leakage class A according to GOST R 9544 “Shut-off pipeline valves. Classes and standards of tightness of closures "(2005).
JiP Premium steel ball valves are mainly designed for water of external and internal heating networks at a temperature
coolant up to 180 ° С, including for water in the circuits of heating networks in accordance with the requirements of PTE:
Requirements for the quality of network water,
Rules of technical operation of power plants and networks of the Russian Federation (PTE) p. 4.8.40.
JiP Premium ball valves can also be used in water-glycol refrigeration systems.
The fully welded steel body of the valves meets the modern requirements for fittings used in heating systems and provides a high degree of safety.
The valve body is made of carbon steel and is not protected against corrosion. Therefore, to prevent corrosion, the valve should either
install in a dry room, or cover with moisture-proof insulation, or apply paintwork materials to the surface of the crane, provided for by the project of the facility.

The valves are equipped with a unique stem seal, which, unlike most analogues from other manufacturers, does not contain
rubber, which loses its properties over time under the influence of high temperatures and pressures. JiP Valve Stem Seal
Premium consists of several layers of Teflon and graphite and guarantees complete tightness and unlimited service life of this
crane assembly in conditions of high and varying temperatures.
The self-crimping design of the ball seal, which is a special lens springs with two carbon-fiber-reinforced fluoroplastic rings, provides the necessary tightness of the valve closure and optimal torque
the moment required to turn the ball. In the basic version, the valves have a standard passage, but have an increased
throughput in comparison with analogs due to its design features (smooth entry and exit, cylindrical insert in the ball, etc.).

Main characteristics

Nominal bore: DN = 15–600 mm;
Nominal pressure: PN = 16, 25, 40 bar;
Medium temperature: from –40 to 180 ºC;
Minimum ambient temperature: –40 ° С1);
Minimum storage and transportation temperature: –50 ° С;
Heat carrier: water or water-glycol mixtures with glycol concentration up to 50%.

In 2014, the production of ball valves with connecting dimensions of branch pipes and flanges in accordance with GOST begins. These cranes have
in the designation of the code number the letter G. Compliance of the connecting dimensions with the GOST standard makes it possible to simplify the design and installation of cranes.

Nomenclature and code numbers for ordering
Ball valve JiP Premium FF type flanged (flanges PN = 16 bar) with handle

Nominal bore D y, mm	Code number	Nominal pressure Р у and maximum working pressure Р р, bar	Temperature of the transported medium, о С		Conditional throughput K vs, m 3 / h
			T min.	T max.
65	065N4282G	16	–40	180	200
80	065N4287G				470
100	065N0240				640
125	065N0845				1080
150	065N0850				1900
200	065N0855				2300

Ball valve JiP Premium FF type flanged (flanges PN = 25 bar) with handle

Nominal bore D y, mm	Code number	Nominal pressure Р у and maximum working pressure Р р, bar	Moving medium temperature, о С		Conditional throughput K vs, m 3 / h
			T min.	T max.
15	065N0300G	40	–40	180	11
20	065N0305G				15
25	065N0310G				34
32	065N0315G				52
40	065N0320G				96
50	065N0325G				184
65	065N4281G	25			200
80	065N4286G				470
100	065N0340				640
125	065N0945				1080
150	065N0950				1900
200	065N0955				2300

Material of the main parts of the crane

Work zone

Unlike most analogs from other manufacturers, the maximum operating pressure of ball valves does not drop with an increase in temperature within the stated operating temperature range (–40-180 ° С). This is ensured by the design and thickness of the body, the choice of materials of construction, and the absence of rubber in the stem seal. Below is the working area of JiP Premium WW ball valves (welded ends), with the maximum pressure of the flanged versions being limited by the nominal working pressure of the flanges.

Overall and connecting dimensions

drive.

Flanged ball valves with connecting dimensions in accordance with GOST

The weight of the valve in this table is indicated for flanged versions PN 40/25, for versions PN 16 it is less.
The weight and dimensions of the valve DN = 250–600 mm are indicated for the PN 25 version, including the weight of the manual gearbox.
drive.
ØD * - nominal diameter of the hole in the ball.
n is the number of holes in the flanges, where two values are for PN 16 and 25, respectively

JIP Reducer Ball Valve from the leader in the production of valves Danfoss is designed for water and gas supply systems. Accordingly, the working medium of this device is water and gas. Cranes with a JIP gearbox are successfully used at the maximum permissible medium temperature from -30 ° C to + 180 ° C. The two-position device provides both opening and closing of the medium flow in the pipeline.

Jip crane structure

Mechanical control (reducer) allows you to fully control the process of opening / closing the flow of water or gas. The locking element (ball) made of stainless steel allows the valve to be used for a long time: the service life reaches 10 years or more. The JIP ball valve is attached to the pipelines by means of steel flanges, which provide high tightness in operation, as well as strength and ease of installation. We offer JIP gear valves and other ball valves at competitive prices.

Ball valve JIP FF DANFOSS is a shut-off valve for engineering systems with a liquid working medium. This two-position valve is made of steel and is flanged to the pipeline.

Specifications

Diameter: 15-200 mm;
Maximum coolant temperature: 180 0 C;
Throughput: 11-2300 m 3 / h;
Working pressure: 16, 25, 40 bar.

Code number	Type of	Du, mm	Ru, bar	Kvs, m3 / h
Flanged JiP-FF ball valve with standard bore handle; material - carbon steel; Tmax. = 180 ° C
065N0315	JiP-FF	32	40	52
065N0320	JiP-FF	40	40	96
065N0325	JiP-FF	50	40	184
065N4281	JiP-FF	65	25	200
065N4286	JiP-FF	80	25	470
065N0340	JiP-FF	100	25	640
065N0945	JiP-FF	125	25	1080
065N0950	JiP-FF	150	25	1900
065N0955	JiP-FF	200	25	2300
065N4282	JiP-FF	65	16	200
065N4287	JiP-FF	80	16	470
065N0240	JiP-FF	100	16	640
065N0845	JiP-FF	125	16	1080
065N0850	JiP-FF	150	16	1900
065N0855	JiP-FF	200	16	2300
Flanged ball valve JiP-FF without gearbox with standard bore, flange for electric actuator; material - carbon steel; Tmax. = 180 ° C
065N0332	JiP-FF	65	25	200
065N0337	JiP-FF	80	25	470
065N0342	JiP-FF	100	25	640
065N0347	JiP-FF	125	25	1080
065N0352	JiP-FF	150	25	1900
065N0357	JiP-FF	200	25	2300
065N0362	JiP-FF	250	25	5100
065N0367	JiP-FF	300	25	9100
065N0372	JiP-FF	350	25	7000
065N0377	JiP-FF	400	25	10 400
065N0382	JiP-FF	500	25	23 700
065N0237	JiP-FF	80	16	470
065N0242	JiP-FF	100	16	640
065N0247	JiP-FF	125	16	1080
065N0252	JiP-FF	150	16	1900
065N0257	JiP-FF	200	16	2300
065N0262	JiP-FF	250	16	5100
065N0267	JiP-FF	300	16	9100
065N0272	JiP-FF	350	16	7000
065N0277	JiP-FF	400	16	10 400
065N0282	JiP-FF	500	16	23 700

Advantages of JIP FF DANFOSS models

The welded steel body makes the crane very robust and reliable.
The drain seal is made of graphite and Teflon and does not contain rubber, so the valve remains tight even after many years of use.
The design features of the crane endow it with a higher throughput than most of its counterparts.

Applications

Ball valve JIP FF DANFOSS is mainly used in heating systems and water supply systems. Steel taps are designed for purified water and glycol solutions only. Other liquids can corrode the valves. They are not designed to be installed in pipelines carrying gases, steam or drinking water.