How to dock laminate between rooms, without spoiling aesthetics of the appearance. How to dock laminate between rooms how to connect different laminate beautifully

Solving how it is better to poison laminate, the masters proceed from the structure of the connected materials: the same type of strips easier to assemble into a single canvas than, for example, to fit them under the tile and linoleum. The profile market offers a number of devices that facilitate the design of the floor from different coatings.

Before docile laminate between rooms, it is important to take into account the optimal conditions for applying this method of laying outdoor finish:

difficult laminate plots are easier to combine among themselves in the doorway than to spread the solid.
to ensure the possibility for the natural temperature expansion of the slats, the rows every 7-8 m should contain compensation gaps of 1-1.5 cm width;
if different panel types are used in different rooms, the lock connections may not coincide;
the zoning of the room also implies a thorough design of the joints so that the selected shades and the textures of the lamellae are harmoniously combined;
if the podium is scheduled, without such a framing the stage will look inactively.

The locking connection is distinguished by reliability and durability, it tightly holds all the details of the coating. At the same time, depending on the temperature and humidity conditions, the laminate is capable of changing the dimensions, it is narrowed and expanding. Deformation gaps make it possible to preserve the integrity of the wood structure when changing the microclimate. If it is competent to dock the material, the site of the slot will be masked, which falls on the doorway.

How to keep laminate?

The compound can be performed with the use of thresholds, adhesive compositions, cork compensators, mounting foam. The choice depends on the type of coating and features of the room.

Castle method

Relevant with respect to the same planks coinciding in height and structure. Castles in the lamellas taken from one party will exactly coincide, so this method of finishing is applied in small rooms that do not need additional deformation gaps in need.

Connecting Planks - Moldings

The most common elements attracting cheap, simplicity of installation, widespread on sale. Depending on the execution, the product can be glued or fasten over the gap to be hidden between different format covers. Such a slit will be enough for the natural expansion of the lamellae, the wood structure will not breed and get out.

The thresholds are made of a wide range of materials, the most universal - metal with a variable length. They help to docile a variety of coatings, including laminate with linoleum and ceramic tiles.

Cork compensators

Usually allow them to combine the lamellas, less often they are used to work with the incomprehensible types of outdoor finish. Due to the soft tube structure, you can lay the coating without gaps: when the wood expansion, the compensator will compress, and during the shrinkage of the panels, the material will find the source form.

The product is introduced after the completion of the floor assembly: a small spatula will help to put it in the remaining cavity. Cork is difficult to see if you do not know exactly where it is, as it coincides with the basic finish. If necessary, the compensator is tinted with paint or marker.

Foams and sealants

Used infrequently, as the surrounding surfaces are stacked. Their advantage - the ability to mask the cracks of any width, with their help you can dock the plots of complex shape. Important after applying to remove excess composition, otherwise traces will remain. In this case, it will not be possible to dismantle the surrounding panels without destruction, the sealant will not allow the wood to expand, so the method does not apply in extensive premises.

Often connecting components are supplied with the laminate party. They fit perfectly with the layout of different materials, although they are an order of magnitude more expensive to universal planks. Such elements produce only large brands producing laminate.

Types of connecting thresholds (planks)

Depending on the material, the product is divided into:

laminated. The pressed wood chips are based on, a laminated coating is provided that imitating the texture of the lamella. With their help, it provides aesthetic docking, but they are vulnerable to moisture;
rubber. Usually have an angular execution, apply for the design of the faces of podiums and stairs. Rubber is devoid of sharp edges, durable and durable;
metal. They are made of aluminum, steel, brass, the outer decorative layer is performed in wood, gold, silver gamma. High strength allows them to be used in zones with large patency;
wooden. They are less common due to the high cost of the material, they are used to decorate the area of \u200b\u200bthe conjugation of areas collected from natural wood. We need careful care, regular grinding and updating layer of varnish.

The following forms of profiles are distributed:

straight. Standard variations, in demand for the design of joints between coatings with one height;
transitional. Designed specifically for working with multi-level materials;
corner. Are used to combine perpendicular surfaces, for example, when finishing stairs, podiums;

Using the final slats, decorated the edge of the last laminated panel.

Nuances Mounting Connecting Profiles

The quality of the final joint is affected by the smooth of the draft coating: the differences in height are extremely undesirable. The maximum allowable deviation from the horizontal in this case is only 2 mm.

It is important that before laying the laminate and all components acclimatized in the room for 48 hours, otherwise the risk of swelling of the coating, even with observance of deformation gaps.

Installation is made at the plus air temperature. The lamellas and zones of the joints in the studio apartment are desirable to focus along the lights falling into the room, in this case the compounds will be less noticeable.

Options and Technology Docking

The process of registration of connecting zones varies depending on which materials to work with. Most often the problem of pairing laminate in two adjacent rooms, and when laying the floor in the studio, wood coating can be combined with linoleum and tiles.

Between rooms

Algorithm use of the thresholds:

The connective planks and the doorway are measured. It is important to make sure that the threshings not only fit into the input zone, but also completely covers the entire length of the compensation clearance.
The bar is applied to a future location, a markup is applied through the holes in the product: holes under the dowels in the draft base will be drilled on it. The attachment points should not affect the laminated base, they are prepared in the center of the gap. You also need to circle the location of the thoroughbre.
In accordance with the markup in the draft floor, the holes are formed, while the diameter of the drill is selected in accordance with the dimensions supplied with the connecting plate.
The holes are placed in the holes, the threshings are placed on top.
The bar is fixed with self-pressing, gently screwing them down and tightening them tightly in plastic dowels.

Cleaners with hidden fasteners are assembled as follows:

By analogy with the previous case, measurements and marking are performed.
The exhaust of the product is equipped with a groove, in which the hats of the screws are placed with already twisted dowels.
In accordance with the markup form holes.
The bridges hold over the disguised gap, while moving a dowel with self-taverns in the groove so that they fall into the hole created by the perforator.
The bar is closed with a hammer through a folded cloth or a wooden bar so that it is close to the level of laminate.

Also there are thresholds on self-adhesive tape, they are easier to install, but the risk of their displacement during operation is great.

With tiles

If in priority metal thresholds, the algorithm of their installation is described above. Also, you can use the cork compensator as a docking profile.

Procedure:

For the neat introduction of a flexible cork compensator, it is cut off not only along the length of the doorway, but also in the height of the floor covering so that it does not perform over the laminate and tiles.
After laying the laminate using the construction glue, the connecting element is fixed. First, the black base is covered with adhesive composition, apply a cork bar, but at this stage it is not pressed.
To compact the gaps, the acrylic sealant is applied, then the retainer is pressed to the laminate and the rough floor. Excess sealants are removed with a damp sponge, the surface is screwed down with a dry vet.
On the other hand, they laid ceramic tiles.

Such a docking method is advisable not only from the point of view of aesthetics, it allows you to protect the floor from water penetration, increase the operational resource of coatings.

With linoleum

Materials have different thicknesses, so here it is necessary to visually smooth the difference in height. Multi-level joints are easier to organize with the use of metal thresholds - this classic way forces even beginners.

If you want to equip the floor without deviating from the horizontal, you can put the tight material under thin linoleum and use a convenient T-shaped molding when connected.

Before those who independently puts the laminate in their home or apartment, often the question often arises: how to make a laminate and laminate or laminate and laminate and the other flooring so that the joke look neatly and prevented free move.

How to connect laminate

For a start, let's figure it out in what cases you have to perform laminate connections.

Why need a connection

It is not about the standard assembly, when each panel is connected to previously laid. And about those situations when you have to use a special connecting profile for laminate.

The need for this occurs:

When moving from one room to another.

For reference. The fact is that the locking of the laminate is sufficiently dense, it does not allow separate panels to "walk" freely with humidity and temperature drops.

Therefore, the perimeter of the room is left damper gaps between the coating and the walls - the free space for the expansion of the laminate.

If you do not leave it every 7-8 meters, there will be no place to expand the laminate, and in the connecting places it will take it.

And in order not to make a connection in a prominent place, it is usually suitable in doorways.

When finishing large areas. The reason is the same - the device of damper gaps.
When used in one room, different types of flooring or different types of laminatewhose locks do not coincide.
With floor level drops. For example, if you need to separate the podium or staircase laminate laminate.

When specialists are engaged in decoration, we do not even think about such trifles. But if the repair is done with your own hands, even such a simple task, as the connection of the laminate between the rooms, can cause difficulties.

How to issue a connection

Fortunately, all these little things have long been thought out, the solutions are found, and we can only take advantage of them. Almost all laminate manufacturers produce various components for it.

In addition to both the plinth, the connecting plan for a laminate, which is often referred to as a spawn or connecting profile.

Types of connecting planks for laminate

By purchasing laminate, you can learn from the seller and the presence of the connecting elements necessary in your case. They differ in both the shape and the material from which are made.

Form of profile

Depending on the purpose, the connecting planks are divided into the following types:

Direct (connecting) profiles - Used to design, located with it at one level.

Transient profiles - Connect floor coatings located at different heights.
Corner profiles - Designed for the design of the junction of mutually perpendicular surfaces on stairs and podiums, decorated with laminate.

In addition to those listed, there is also a final profile for framing the open edge of the laminate.

All these products are performed not only the decorative function. The instruction on the software requires the expansion seams, and the connecting profiles allow you to make them hidden, imperceptible look.

Materials manufacturing

Connecting profiles are made from different materials depending on the purpose.

Laminated - Made from pressed wood fibers and are covered with a laminated film with a decorative pattern.
The drawing is selected in accordance with the laminate decor. Since to connect the laminate between the rooms is required as soon as possible, this kind of profile is most often used in the doorways.
Metal - They are made of aluminum, brass or stainless steel and are coated with a decorative film.
They are distinguished by increased strength, so used in places with high permeability.
Plastic - Soft and flexible profiles, most often used for registration of curvilinear joints. Their main advantages are a wide variety of colors and a low price.
But the service life of plastic profiles is relatively small.

Rubber - This is most often angular profiles intended for fastening on the stairs. They allow you to walk on them more secure, preventing slipping.

Installation of connecting profiles

All listed connecting elements are supplied with an additional fastening rail for hidden editing.

For reference. Metal profiles can be installed in an open method with dowels and screws.

The fasteners are included in the product package, and in the metal bar, mounting holes are made in production.

How to mount profile, you can look at the video presented on this page.

The fastener rail is mounted to the base for glue or screws. Moreover, the second option is considered more preferable, since it makes it possible to re-install and has greater durability.

The sequence of installation of the connecting profile is as follows:

The fastener rail is installed next to the edge of the coating and fasten with screws.
From the rails begin to retain the second coating.
The decorative bar is installed in the fastener rail guide and snap the hammer through it through the wooden bar.

Conclusion

The quality of repair and the impression of the created interior is largely dependent on such small things as the design of joints, angles and transitions.

The photos presented in the article confirm this. Using the connecting elements specially created for this, you will not only achieve the excellent appearance of the laminated flooring, but also extend the life of its operation.

When laying a laminate, it is often necessary to dock it with another flooring on the border of the premises or zones. Sometimes in the places of its laying from the floor there are pipes of heating or water supply. Finally, the shakes of the floor and walls are inevitable.

Since laminate is subject to temperature expansion, its connection with other materials should not be tough. In the same time, the joint must be sealing or covered on topSo that he carefully looked, and so that the gap remains in which the garbage will be clogged.

Sealing of laminate junctions with other floor coatings

The need to join two types of laminate or laminate with other floor coatings usually occurs in doorways, as well as in the area divided by the area. The width of the compensation gap at the coating joint is calculated according to the principle: 0.5-1.5 mm for each meter of the joint.

Bog of different types of laminate

The need for a joint occurs if:

Laminate with different locking systems
The difference of the height of the coatings is formed
Designer's jack, curvilinear
Laminate is the podium or steps
The area of \u200b\u200bthe room exceeds 64 m² and the coating can not be done solid, additional compensation seam is needed.

In these cases, for decorating joints used special connecting planks (thresholds, moldings). This is the optimal solution for laminate butts.:

It remains a gap for temperature fluctuations
The bridges protect the ends of the laminate and closes the gap from above, preventing garbage from entering it

Planks-thresholds differ in configuration and allow solving different tasks:

Straight - for sealing the joints between coatings on the same level
Aligning - for connecting coatings with a small (up to 4 mm) height drop
Multi-level - for joints with solid height difference (up to 2 cm), may be coal, rounded or more complex shape
Corner - for joints of mutually perpendicular coatings (steps, podiums)

They are made from different materials:

Laminated, from pressed chips covered with a protective-decorative film. Usually selected in the tone of the laminate and allow you to make a bog as imperceptible
From an array of wood - Dear, elite
Metal, aluminum, steel, brass with anodized coating. These are the most durable linings that can be used in places with high permeability, some of these products can also be bending for cryvolyline joints.
Plastic (PVC) - flexible beams, ideal for decorating curvilinear joints, differ in variety of color gamut. Available at the price, but are short-lived
Rubber usually come angular

Laminate and tile jack

For the junctions of the laminate and tiles, you can use the same thresholds that to decorate the joints between the two types of laminate, selecting them according to the junction configuration. If the surfaces of the tile and laminate are on the same level, the height difference is absent, you can make a joint without a melting:

If the length of the joint does not exceed 2 m, and the width of the seam is 3 mm, it can be filled
Longer and wide seams are filled elastic members (silicone sealant, mounting foam, liquid cork)
Long smooth seam without drops of thickness fill cork compensator, It is permissible to use it with a slight drop of coatings

Technique docking laminate and tiles in detail is described.

Bog of laminate and other flooring

Laminate butts with parquet, linoleum usually closed with thresholds, more often aligning or multi-level. Less frequently between laminate and linoleum is poured with transparent silicone glue, this option is used if the coatings are on the same level, and the sections at the junction are perfectly smooth. At the edges it is necessary to stick a painting tape, so that the adhesive composition does not hit the surface of the coating.

If a laminate and carpet is combined, a sufficiently rigid substrate is usually the thickness of the thickness of the laminate, and the carpet itself is laminated with the alumina itself. If they are joined, it is necessary to use a transitional multi-level thoring.

Installation of browsing

Here are some varieties of items by ways of installation:

Two-shaped T-shaped for hidden mounting, fastening screws (self-drawing)
Single-line with a Christmas tree dowel, whose caps are inserted into the groove from the wrong side of the clad
Single-part for open fastening screws, comes with ready-made mounting holes and screws with decorative hats
Z-shaped multi-level, with a zigzag leg, the paw of which is attached to the base of screws or glue
Flexible brass or aluminum, with one-sided paw, divided into many sections
Flexible polymer doubles, from the groove and tabs
On self-adhesive basis

Self-adhesive thresholds are usually used if the base is loose, and fifty fasteners are problematic, as well as on top. Before their surface installation, it is necessary to carefully clean and degrease, remove the protective coating from the bottom, attach the threshings according to the markup and press well.

Two paw pads are mounted in such a sequence:

Placed the place of the junction
Based on the holes with a diameter of 6 mm on both sides of the seam in increments of 20-30 cm
Plastics dowels are clogged into the holes
Installation rack is installed in place and attached to a concrete base with self-draws with a length of 60 mm, to a wooden - 45 mm
Outdoor coatings are stacked over the paws, the seam between them should be wider than the assembly groove
The floor of the decorative plank is inserted into the mounted groove, with light blows, it is driven into place. First, the bar is partially interpreted along the entire length, with gradual progress from one end to another, then you need to repeat the operation, and only on the third goal to score it to the whole depth

If the open-fasteners are used, floor coverings are first stacked firstThen the necks are applied on top and markup is made, the holes are dried in the base locations, the dowels are installed in them. The thresholds again stacked and fixed with screws.

Similarly, the markup is carried out under single-maintained thresholds with secret dowels. The thresholds are installed so that the dowels got into the holes, and is nailed with a queen.

It is best to use the thresholds, too, brand as laminate. Quick STEP produces laminated and aluminum multifunctional thresholds, with which you can make joints between different coatings, including multi-level. Their decorative bar consists of several segments, deleting separate segments, you can change its configuration.

If the bridges are mounted with a zigzag leg (one paw), the coating of greater thickness is first stacked. Then next to it is mounted with self-draws or on the glue of the plank paw to the side opposite to the laid coating. On top of the foot laid a thinner coating. The top of the plank with neat blows of the hammer in 3 receptions is hesitated to the necessary height, so that its edges have pressed both jammed coatings.

To close the curvilinear joint, you must first perform the markup on the floor, in accordance with which the profile of the flexible impression is disintegated. Metal threshing can be bent using a special tool, as well as manually, with a knee support.

The polymer groove that is installed in the installation seam is bent during the installation process and fixed to the base screws (the dowels are inserted into the holes). The top, the decorative part of the plastic threshing acquires the plasticity in the heated state and retains the shape-given shape after cooling. You can soften insert with a construction hairdryer or by placing 15-20 minutes to the water heated to 50-70 °. The insert is gradually pressed into the groove and carefully pressed.

Laminate junction with vertical surfaces

In place of the junction of laminate with a wall
installed plinth. It performs a double function:

Covering compensation clearance
Decorates the joint, giving the situation a completeness

Also inside the hollow plinth can be a box under hidden wiring.

The plinth cannot be attached to the laminate, only to the wall, and a small gap should remain between its lower edge and the surface of the laminate, so that nothing prevented the temperature expansion of the floating coating.

Laminate is well combined by plinth from MDF. If the walls are smooth, you can use a traditional wooden plinth, fastening it with self-draws or soak on glue. With a significant curvature of the walls, a flexible plastic plinth is suitable, which is attached to clips or "petals" to the base, screwed to the wall by self-draws.

The joints of the laminate with columns and other architectural elements are also decorated with a plinth or special linings of a suitable form.
If at the site of laying laminate from the floor, the tube of communication comes out, in the panel, it is necessary to cut a hole in the panel by a template for it, and leave the compensation gap of 10-15 mm.

After laying the laminate, this clearance is closed by a special decorative detachable lining of suitable color and shapes. If the form or location of the pipe (pipes) does not allow the use of lining, the gap can be filled with silicone sealant.

Video

Installation of different types of aluminum thresholds

Sealing of the junction of laminate and tiles flexible hempore

Registration of laminate jacks with Quick-Step accessories. Installation of thresholds, pads for pipes, plinth.

Outcome

Laminate joints with other coatings should be placed so that it remains the possibility of its temperature expansion. For these purposes, elastic fillers of seams (sealants), cork compensators are suitable, but in most cases the seam is covered on top of a decorative fitting of a suitable configuration. There are thresholds that allow you to put the coatings with the difference in heights.

The location of the laminate with walls, columns and other architectural elements is decorated with a plinth, and it must be attached to the vertical surface. The junctions of the laminate with pipes of communications are usually closed with special decorative sockets.

When arranging the house, there are work with the floors. They laid different materials. Today, the most common laminate. Since it has many advantages. The main one is attractive

Calculator calculating number

Appearance and long service life. His choice is rich enough, so you can pick up for every taste and to any interior. The room in which the laminate is packaged will be cozy, comfortable and beautiful.

Laminate with laminate can be performed in different ways.

Laying this coverage is quite difficult and must be carried out correctly. Otherwise, the laminate will look poorly and will decrease its service life. It is very important not only to consider the basic work on laying, but also additional. So, almost all floor coverings form joints that need to be hidden. Basically, they appear at the intersection of different rooms. After all, each of them is covered.

The connection of the laminate and laminate is not enough. Since it needs to be done neatly, so that it does not form a tubercle, which will create obstacles to move people. In addition, it should be quite unclear. Otherwise, the room will not only be uncomfortable, but the look will deteriorate.

Connections: When is it necessary?

As experience shows, specialists with this work can cope quickly and efficiently. Basically, problems arise when a person performs all work on its own. This is simply explained. He does not have the necessary experience and work skills. Therefore, it is more complicated. But you can always take advantage of the advice and prompts of professionals who have already taken into account and thought out.

The design of the compounds is very important when the floor is arranged. It allows you to firmly consolidate the planks of the coating, as a result they will not be able to move in mechanical exposure and other factors of impact. Such a laminate will last much longer.

When performing compounds, it is important to understand that they mean not those joints that are obtained between the tiles when they are styling, but those formed with the material that was laid for a long time. Also, there are a number of cases when it is necessary to conduct this procedure. These include:

The compounds that came between the rooms;
When laying a floor in a room with a large area;
Stacking different materials in one room. It may be a laminate, which is characterized by color, view and other. These are mainly carried out for zoning;
When finishing steps, thresholds and other drops that are on the floor.

Laminate Laminate Connections: Methods

The compound can be carried out in different ways. The most common use of planks. They form a mix of laminate locks. You can buy them in the same store, where both the main material. It should take into account their differences. They are of different shapes and materials.

So, highlight straight, transitional, corner and final. The first are used in the arrangement of laminate connections with laminate or with a different coating. For example, when making a tile connection and laminate, if the joint was formed due to the drop in the floor levels, then it is better to apply transition strips. Corners are used when working with steps or with the arrangement of podiums. After laying the main coating is made, the edge will appear. They look not aesthetically, so they need to be hidden. For this apply the final profile.

These additional materials serve not only as decorating. Also, they will make all the expansion seams hidden.

Laminate Castle Connection: Plank Materials

Planks that are used in compounds are made from different materials. They can be laminated, that is, they are obtained from wood and top covered with a special film that performs the function of scenery. The choice of such profiles is quite large. It allows you to choose the one that will most like the main coating and after installation will not be noticeable. Basically, such compounds are made in the doorway.

Another option of profiles is made of metal. Basically, these works are used brass or aluminum. They are very durable, so they recommend using them in those places where high passability.

You can also apply plastic profiles. They are distinguished by increased flexibility and softness. Therefore, it is suitable for uneven joints. In addition to these advantages, this material has low cost and a large selection of shades. But the period of its operation is significantly inferior, which is a disadvantage.

Rubber profiles are better suitable for the corners. In addition to the main functions, they will make a much safer movement.

Types of Laminate Connection

There are different types of compounds. The most common castle. It firmly fixes the panels. Even with significant mechanical impacts during operation, they do not change their position. At the same time, such a connection without additional effort, as it disassembles and is going. In this case, the so-called click locks are used. They can be reused up to five times.

Another advantage of such compounds is that it has a high tightness indicator. So at elevated humidity, its properties are not violated. This does not affect the process of his disassembly. It goes easy and simple.

Also used adhesive compound. But this method is rarely found, it is not very practical, so over time goes to the back plan, yielding new ways to fastening. To perform this type of lock, glue, which are lubricated by the planks and are applied with the help of the hammer.

This method is not very practical. Since it does not allow to replace one of the laminate boards or perform its shared repair if necessary. And the process of removal of the floor covering is quite complex and long. In addition, the low mobility and flexibility of the joints can be caused by the fact that it breaks.

Over said it follows that it is necessary to accommodively approach the main work on laying the flooring, but also additional, such as connections.

Despite the widespread view that laying of the laminate is a simple and unemptent process, certain difficulties in the installation process of the coating often inevitably occur. Particularly often people face a problem in the case when you need to connect one laminated coating with another. Such situations often arise, because in some cases the same model of laminated sex is rarely placed in all rooms at home.

The laminate with laminate is to be allowed, as a rule, only in two cases:

When the laying of coatings in different rooms is made and it is necessary to docile them beautifully so that there is no sharp transition;
When within one room you need to make a beautiful transition from the coating to the coating (for example, to zonate the room).

It is worth noting that in recent years the connection of two types of laminated floors has become a common designer solution that allows non-standard and originality to the interior of the room.

If in one room or at the junction of adjacent rooms, it is assumed to further connect two laminated coatings, then it should be envisaged that the draft floors were perfectly smooth.

If the draft floors are smooth, then you need to consider the fact that different laminate can have a different thickness, which varies from 6 to 12 mm. The optimal option is the purchase of floor coatings, substrates, thermal insulation and sound insulation materials of one thickness. In addition, technological pie (substrate, insulating layers, film, etc.) should also be made according to one technology so that there is no longer the slightest drop in height. It is also not recommended to keep laminated floors from different manufacturers, which will differ in the class of wear resistance and, as a result, operational period.

How to connect laminated coatings?

In fact, there are several sufficiently simple and simple ways to connect "Laminate Laminate". The most common of them are:

The easiest option is to lay two types of laminated floors from one manufacturer. In this case, as a rule, the laminate and in the first, and in the second case there will be the same system of the lock connection, so it will be extremely simple to docile the panels of two different species. An excellent option in such a situation is the acquisition of various decors (for example, dark and light) from one collection of a particular manufacturer. True, this method is suitable if the laminate is kept in the same room.

If the compound of laminated coatings is carried out at the junction of two rooms (for example, in the doorway), then between the materials it is necessary to provide a technological gap. If it is not, then the likelihood of the formation of defects, bloating and decline in the life of the laminated gender is great.

Using thresholds. In most cases, to connect two laminated coatings, use the threshings. With the help of modern docking profiles, smooth and low-net transitions between two types of coatings can be made. Thresholds also allow you to form a small gap, which is necessary for the temperature expansion of the wooden material. Connecting thresholds can be made of plastic, metal, wood - the selection of one type or another will depend on the stylistic solution in the room and the preferences of the owners.

In addition, many manufacturers of laminated floors together with laminate produce connecting thresholds. Of course, they will cost much more expensive than traditional options presented in specialized stores, but from the point of view of style and harmony of the transition, this solution will be as correct as possible. Such products can be found from QUICK-STEP, PERGO, TARKETT, EPI, Alloc and other major manufacturers from companies.

Not so long ago, cork compensators appeared on the construction market, with which you can easily connect two different models of laminated floors. The main advantage of this method is the lack of a gap as such. Cork insert completely fill the gap between the materials. The laying of the cork insert is carried out after the installation of laminated floors. The compensator is enough to cut, approximately fit under the size of the gap, then insert.

In most cases, an externally cork compensator will be invisible in the transition, because His shade is neutral. If the insertion from the tube is noticeable and rushes into the eye, then it can be painted using a suitable color marker or special paint so that it turned out more or less similar shade.

The use of construction installations and sealants, which in stores are presented in a wide variety, for connecting two laminates, is not a very frequent solution. At the same time, with their help, you can remove the bog between the panels of different dimensions.

The main disadvantages of such a solution to create a connection between the coating are: dismantling the panel without damage, which come into contact with the sealant, will not be carried out; In the presence of sealant or foam in the junction between coatings, the material will not be able to expand at temperature effects, which will cause damage to the boards and reduce the deadlines of the floor operation.

Conclusion

By and large, special problems when connecting two types of laminated coatings should not arise (especially when using the clad and cork compensator). In the event that it is necessary to roll up the floors without using any additional funds, or work must be carried out in a large room and the junction should turn out to be long enough, then the process is best entrusted by specialists. In addition, a professional approach is needed if there are serious differences in height between two coatings.