How exactly cut off the plastic window sill. DIY window sill, the ideas of using the windowsill The work process is reduced to such stages

Repairs in the house - the case is very and very expensive. But if the owner has at least minimal construction skills, and there is a couple of sensible assistants on the pickup, then most of all works can be performed on our own, spending only building materials (and saving about the same amount that would have to pay to hired masters) . For example, with such a thing like a windowsill, you can easily cope with your own.

Tip: Before you begin the manufacture of the window sill, make careful measurements of the place in which it will be installed. And even better - draw a sketch with all the fasteners and recesses. So you will get a more visual picture and you can avoid possible errors.

How and from which materials to make a window sill

The windowsill is not the thing that can change every five years, along with wallpaper. Once installed, it must serve not one decade. Therefore, a number of requirements are presented to it:

reliability and strength;
moisture resistance;
resistance to heat and sunlight;
attractive appearance and ability to save it for a long time.

For window sills, they usually use three types of materials: plastic, stone and wood. Consider the advantages and disadvantages of each of them.

Plastic window sill

If you have a question about how to make a windowsill do it yourself, then plastic is not your option. In his home workshop, he will not withdraw him, so those who decided to install a plastic window sill simply buy the finished block of suitable shape and color, cut it up to the desired size and put the stubs on the ends.

Plastic window sill is the perfect option for those who want to get decent quality for a small price. It is not afraid of water, does not fade in the sun, durable, looks good in the room and easily fits into any interior. There are only two disadvantages of it: the insanity of the material and is not too much a margin of safety. Plastic is fragile enough, and from a strong blow or large loads can crack. Therefore, it is necessary to handle such window sills and carefully.

Stone window sill

The windowsill of natural stone looks very beautiful, so he choose those who want to create something unique. The stone window sill is not afraid of any loads, perfectly tolerate contact with water and sun. And the builder's master is quite able to make it with your own hands.

To make a stone side of the stone, you will need a special composition consisting of decorative cement and marble or granite crumb. Such a mixture can be purchased in a construction store or order directly from the manufacturer, especially if you need some exclusive composition.

You can calm the sub-circuit board in two ways: in the workshop or right in the window opening. In the first case, you will be easier for you to get the same blanks and to handle them better. The second method automatically removes the problem how to install the windowsill do it yourself, but it makes it difficult to grind and polish.

To lowten the windows plate, a formwork is needed from boards, chipboard, osp or fat plywood. If the edge should be figured, use the profile of the desired form. In order to increase strength, the windowsill reinforced with a wire mesh with a thickness of 1-2 mm with cells of about 5x5 cm. When the stove freezes, it is grinding with electrical grinders. Bulgarian is also suitable, equipped with a special disc. After that, the windowsill are treated with impregnation, strengthening the surface.

Tip: If you need a few identical sides of a small size, make them in the workshop. And there are large massive blocks right in place. So you will avoid the difficulties associated with the installation, but at the same time save on delivery.

Wooden window sill

Wooden window sills are usually installed not to disturb the single style (for example, in a chopped house). But remember that the tree is afraid of moisture, may be swallowed from heat, and the bugs are vullecents very much. To avoid these troubles, you need to very carefully process the wooden window sill with all sorts of compositions and protective impregnations.

For such window sills, only solid wood species are used. In the factory setting, wooden window sills are made in the form of a set glued slab from different wood species covered with varnish or thin layer of plastic.

At home this slabs is unrealistic, so it can be replaced by a single-replete well-dried board with a thickness of 4-6 cm. If it does not work out to find the board of the desired width, you can connect two or three narrow boards together with glue and brazen.

Tip: In order for the wooden window sill with time not "led", connect the boards in such a way that the direction of fibers in them was in different directions.

How to install the windowsill

The windowsill (the windows board) is installed not only for beauty. His main purpose is to divert and reset the condensate emerging in the room so that the moisture does not flow along the walls. This should be considered when installing the windowsill do it yourself: he must play the wall and have a small tilt (about 1 degree) towards the room. In addition, it is very important to give the right shape of the edge of the board or make a special groove (tear).

First of all, you need to prepare a place - dismantle the old slab (if the windowsill is performed), align all the corners and surfaces, and thoroughly clean them from garbage and dust. After that, the windowsill is set to its place, align the level and temporarily fixed with wooden wedges.

Final stage - consolidation. But each type of window sills have its own characteristics.

The easiest way to mock plastic window sill. After it is based on the level and fixed, the board and all empty spaces need to be sprinkled with water from the spray and pour the mounting foam. So that in the process of frosting the foam, the windowsill was not deformed and did not cross the arc, there are load on top of top (for example, 5-liter water bottles).

To securely fasten wooden window sillYou will need metal corners. With one edge, they are attached to the windowsill, and the second - a dowel to the wall. One will need two or three fasteners. Empties are poured by mounting foam, and subsequently plaster.

The most difficult installation stone window sill. It is hard to work with it not only because of the big weight, but also because of the brittleness: due to a random strike, even not very strong, a trace or scratch may remain on polishing, and then a piece will fall off at all.

To securely secure the stone window sill, you will need any adhesive composition on a cement basis. It is either injected with a mounting syringe into a slot between the window and the windowsill, or at first trying the plate, make the markup, cause the solution and set capital.

If a niche for a radiator or himself be under a stone window sill, it needs to be additionally strengthened by the brackets. To do this, in the windowsill, drill the nests in advance, in which the fastening anchors will be adopted.

In this article we told how to make our own hands, standard windowsill. But if you wish, you can turn it into a comfortable and wide writing desk, a roomy checker or combined with a sink. The main thing is to think about the design in advance.

Good repair!

The owners of small apartments know perfectly well as every see useful area is important, but what happens to a creative approach when it comes to the windowsill? In most cases, it is limited to the fact that the windowsill becomes a place for flowers, and few think about how to make a desk from the window sill, which is able to make a great performance of the working area in the kitchen or the workplace in the room.

The desk from the window sill is suitable for a room with a small square.

You should not neglect the possibility of optimizing the living space, in addition, this will require a minimum list of tools and materials:

a ram for installing legs and a windowsill strengthen;
chrome metal racks;
plastic plugs and holders for racks;
mounting perforated profiles;
self-tapping screw;
pVA glue;
antiseptic impregnation;
mounting foam;
glossy or matte enamel;
putty on a tree;
emery skar;
pencil, ruler, cord, roulette;
electric jigsaw;
hacksaw;
bulgarian;
drill;
plane;
paint brush, spatula.

The most successful point to make the desk from the windowsill will replace the old window on the plastic (if it was not replaced earlier). The work of specialists is suspended before the installation of the windowsill and slopes.

The structure of the future table is based on a pine furniture shield with a size of 38x600x2000 mm in size, and the base will be the window opening with a width of 1800 mm.

The thickness of the bar for each case is individual and must allow windows to move freely, without touching the table covers.

Sequence of work

Before proceeding with any installation work, it is necessary to determine the dimensions of the future design so that it is convenient in the work and did not interfere with the passage. Be sure to consider that in most cases, heating radiators are placed under the windowsill. It will be difficult to call comfortable stay at the table when the knees rest in the battery, and the elbows hang. After all measurements, you can move to the markup of the main sheet.

The front edge of the window sill is performed on a large radius arc. Take a long twine, one end securely fix the walls, bring a pencil to another. Out of the opposite wall, put a furniture shield. Tension the cord, swipe the arc on the surface of the shield, which is equal to the radius of the room length.

The bottom of the cover requires the reinforcement of the bar, since the table stand will be attached to it in the future using long screws. Slap bar feed the antiseptic and dried. Stick bars to the shield with the help of PVA glue.

The desk from the window sill need to paint, and then cover with varnish.

After setting the glue, drink a tabletop at a certain radius with the help of an electric batch. Additionally, screw the long screws into the bars, thereby amplifying the adhesive connection of the bar with a shield. Select the length of the self-samples so that when screwing it off, they did not damage the table cover. Next, processed the edge of the plates of the plane, polish sandpaper (grain 60). For the convenience of work, the skirt is glued to a wooden small bar.

Considering the question of how to make the table from the window sill, it is necessary to take into account the fact that the radiators located under the window perform the heating function not only the premises, but also the glass package, thereby protecting it from frost and fogging. Therefore, in the tabletop, directly above the radiator, do several ventilation holes so that warm air can rise freely upwards. In the case of ignoring this recommendation, the dampness will be disturbed by the microclimate of the room, and the windows board will gradually come into disrepair. Upon drilling, experts recommend using a pen drill capable of forming holes with a diameter of at least 3.5 cm.

At the next stage, the installation of a manufactured table top in the opening is carried out. From the side of the window, the design will support the bars, from the opposite side - metal connectors having perforation. The profile is lowered at an angle of 90 °, screw one strip to the wall, another to the shield. After installing the shield, fill in the entire space by mounting foam. Give her to capture and fill the seams between the slopes and the windowsill.

Properly installed windowsill can withstand a load of up to 50 kg.

Prompt the surface of the table. After drying, paint the table top into the selected color using enamel with the mark "for internal work." After that, shook the slot under the table and put the flooring.

The design of the table requires an additional support, the role of which will perform chrome tubes. The length of the tube should allow the legs tightly leaving the floor surface. In the legs from the bottom edge insert the plastic plug. Flange with holes attach to the top end of the rack. At the bottom of the tablet, you will drive and drive the nests for the screws. Screw the legs to the table.

Secrets of a window sill

The installed countertop should at least several millimeters enter the window frame. The filled gap between the frame and the tabletop will have an untidy look and quickly cracks.
Shake with a frame must be treated with a sealant. Remember that during the offseason, in the absence of heating, the window will fogging, and the moisture will fall under the tabletop.
Countertop from plywood Be sure to be soaked twice. If the countertop has a scaled back edge from MDF or HDF it also needs to be protected from moisture.

The design that managed to make is able to withstand the weight of the laptop, folders with papers, books, flower pots. Such an unconventional solution is able to make its highlight to the situation, make the interior original and special.

Writing desk-window sill - how to make it right? 80 photos of the best ideas

An excellent stylistic solution for owners of small-sized apartments is the transformation of the windowsill in the useful area.

It helps rational use space, as well as resolve the issue of the location of a convenient workplace for all family members.

In addition, the installation of the table - the windowsill does not require long time and large financial investments.

What is the convenience of the windowsill countertops

The idea of \u200b\u200bturning the window sill to the working area is applicable for any room: kitchen, bedrooms, office, children's.

Such a table will find active application not only from schoolchildren or students, but also other people whose work requires direct seating at the table.

This subject of the interior has a number of undeniable advantages:

High lighting. The use of a desk lamp is required much less frequently, mainly in the dark. However, if the windows overlook the sunny side, it will be necessary to equip their blinds.

Heat source, comfortable for legs. The radiator of the heating system, located under the window space, does not create interference for the location of the legs, at the same time warming during the cold season. For convenience, you can build a special stand.

Saving free space, which, as a rule, in modern apartments is too little.

With the help of their own ideas or design solutions, the most unconventional ideas can be realized, while as a result, it is not just a desk-window sill, but a functional object, which is a certain interior decoration and at the same time retaining its direct purpose.

Materials for the manufacture of a window sill

To create countertops mainly use the same materials as for the usual window sill. They differ only by dimensions: a wider plate is required for the table.

For the manufacture of multifunctional windowsill, suitable:

laminated chipboard / MDF panels;
natural woody array or stone;
acrylic.

Each of the materials has its own characteristics.

Laminated plates (chipboard or MDF) are the fiscal option, differ in a large variety, imitating the most different material. In addition, they can easily with processing, providing the ability to create a windowsill table with their own hands of absolutely diverse shape.

The most preferred is the material sheet, the thickness of which varies in the range of 15-19 mm. The disadvantage is low moisture resistance. In this case, the use of additional processing in the form of plastered and further staining is recommended.

Wood (an array of oak, pine, ash, beech) looks more aesthetically, it will be hidden, and also needs antiseptic processing against pests and humidity.

Natural stone is heavy enough, so when mounting such a countertop, additional supports will be required. So that the natural shade remains longer, such a window sill is treated with a polymer.

Artificial stone (injection marble, acrylic, quartz) - a practical choice: inexpensive, durable and simple, does not need special care.

All the above mentioned materials, providing a rigid and durable design, are excellent under the windowsill table. Weigh everything and against when choosing the basis for the interior, since its functionality and durability depends on this.

Writing Desktop Writing Technology

The creation process includes compliance with several requirements and consists of the following steps:

Preparatory work. First of all, it implies with the need to replace the window canvase. In case there is no such need, it should carefully dismantle the existing windowsill.

In the absence of this skill, you should resort to the help of qualified specialists. With the reluctance to perform such laborious work, you can consolidate a new part to the old window chandelier by liquid nails.

Decide on the most suitable size and color solution. Do not forget about the necessary set of tools for further work.

The next stage implies the calculation of the size and shape. The most convenient way is the use of the stencil.

It is necessary to determine the location of the battery in order to properly cut holes for air intake and the process of heating the glass package.

Direct installation of the product itself. Support should be carried out on bars and perforated connectors. The mechanism of the product is recommended to determine using a special level.

Available empty space should be filled with mounting foam. After careful drying, the joint should be treated with helium sealant.

Empitches the creation process setting the legs.

Caring for this product must be appropriate and depend on the type of material. It is better to abandon the use of hard brushes and alkaline detergents to extend the life of the window sill.

The windowsill - the table is a profitable and original choice, allowing you to create a convenient workplace without serious material investments.

Stock Foto Written window sill

At first glance, this is a simple task.

But hundreds of people are looking for information not only how to cut off the plastic windowsill across, but also to cut it along. And people ask whether it is possible to do it without removing from the window that is, on the place.

In this article we will share your experience and answer all the questions.

Marking

Having draw a line for which we will cut. Be careful if the film is moving away from the plastic, it is better to completely remove it. And on the windowsill glue the painting tape, which is convenient to draw a line.

Native factory film slippery. It is hard to draw in it hard.

Pencil for this purpose does not fit at all. The trait from it is barely visible. The gel handle leaves a clear markup, but at the moment she was erased. Ballpoint handle is better - it is not erased, but people of the older generation will be not visible.

Draw marker with alcohol marker. The line will be noticeable and not lubricate.

How to cut?

There are only 3 tools for our work.

Electropolitanzik

You can cut with different saws. Let's see how each of them works.

A leg with large teeth and with a wiring (when the teeth look slightly in different directions). When cutting the jigsaw twisted, the chips will be visible on the plastic. With properly experience, the quality of work can be acceptable, but still such a pink is not suitable for plastics.

With medium teeth and no wiring. The cut goes smoothly, the jigsik jerks less. Zzabrin little.

Pillet for metal with small teeth and a small wiring. Cuts to cut long. The cut turns shaggy, with small jar. They can be corrected, but it will take time.

Tackle: Take a canvas with medium teeth and without wiring. This is the most optimal option.

Bulgarian (USM) for cutting windows

If you do not have an electrolovka, you can cut off a small machine that can be kept with one hand.

Disk for Bulgarian Take Slim: 1 - 1.6 mm.

Cut this tool easily. Rez high quality, smooth. Also, the grinder can be removed the extra millimeters to fit the two windowsill one to one. Lobzik this will not do this.

But there are also disadvantages: you can not bring out everywhere and the tool creates a lot of shallow dust.

Renovator for cutting windowsides

If the window sill is already installed and the wall is located with the edge, and it is necessary to cut off 8-10 mm, to do it with a jigsaw or an ushm.

It is necessary to make a square or complex hole in the already installed windowsill. It is impossible to make it a jigsaw and a grinder.

For such cases, you will need a universal cutter (in a common rotor). With it, we use only two canvases: 25 mm with medium teeth and a small pink 10 mm for metal.

The pink is bigger than the rather fast reserves of good quality. Not everywhere it will be convenient to operate with a large saw, so small too come in handy for cutting the squares.

Careful with lining

Inside all windowsides there are vertical ribs and hollow space. When installing from the edges of the windowsill attach end pads to hide the ribs of stiffness.

At first glance, the pad can correctly stand. But if you look at, the gap will be visible between the surface and the end lining.

Buying plastic, you need to follow, and by what overlays you buy. For the products with a direct bend, the nose is needed its own lining 90 degrees. For the windowsill with an angle of nose 95 degrees needed its own.

Then the torment will rise evenly and do not have to lure the gap with a sealant.

How to cut off along without removing the window

Imagine that we are dealing with the kitchen window. You bought a new refrigerator. When opening the door of the refrigerator constantly knocking on the spout of the window sill.

There is a desire to spill part of the plastic along the front side. Unfortunately, this is difficult to do.

You can sprink it along, but only from the part that goes under the window.

You need to pull it out, freeze from the inside and put it back. Often it is a difficult task.

If you still need to cut off the nose, or cut into such a zagulin as in the photo.

You can use the end overlays of a long 60 cm. The lining need to cut off the ends and you will get a strip of a little less than 60 cm. If you manage to cut off the strip neatly, you can build a planned design of several pieces without dismantling.

This method is complicated, requires great care and experience, so it is impossible to call it successful.

Usually the installation of the window sill, plastic slopes and low tide occurs immediately after the window is mounted. In most cases, it makes it a brigade of builders specializing in metal-plastic structures. But there are cases when there is a need for installing the windows plates with their own hands, and how to do it right, consider in the article.

How to choose a windowsill

There are different reasons why desire or the need to install the windowsill with their own hands:

The window is in good condition, and the windows stove is spoiled (drank, scratched, melted, burned down, etc.).
The old window sill was set wrong.
There was a desire to install the windowsill of another color. For example, after repairing indoors, the PVC color plate is not suitable for the new interior.
There is a need to replace the windows plate on a wider or narrow. Wider the windowsill put in the event that it needs to put a large number of items, for example, pots with flowers or seedlings. The narrower window sill may be needed if it is too wide prevents the free movement of warm air from the battery up and the air cycle in the room during the cold season. At the same time, warm air from the battery does not heat the window, it "sweats", the dampness and even fungus appears.
It is difficult to find a wizard that will take such a small amount of work as the installation of one suboolent plate.
Install the windows plate is not at all difficult at all, while you can save money that could be spent on the work of the wizard.
It's just nice to do something useful with your own hands.

Important!A wide window sill visually increases the room and its useful area.

So, if it was necessary to replace PVC slab, you need to know that the windowsill differ:

flowers, except for light and dark shades, there are imitation of stone and valuable wood;
sizes: width from 110 to 800 mm, length from 4050 to 6000 mm, thickness from 18 to 22 mm;
firm and country-producer;
price (from 3 to 20 dollars per stranded meter);
the quality of the material is polyvinyl chloride, including resistance to wear and scratch, resistant to heat, moisture resistance and steaminess, resistant to ultraviolet, environmental friendliness, strength.

Did you know? Polyvinyl chloride has very widespread use. PVC even make condoms for people with allergies to Latex.

In addition to directly the windows, you must purchase two end plugs, which are installed on the side slices of the windowsill at the final stage of the assembly work. If there is a need for a direct or angular connection of two windows, one should purchase a universal corner connector for PVC plates.

Required tools and consumables

For high-quality installation of plastic slabs, the following tools and consumables will be needed with your own hands:

Metal square.
Marker or pencil.
Roulette.
Primer.
Bulgarian, electric lobby or hacksaw.
Perforator (not necessarily, only if the material of slopes is dense concrete).
Chisel and hammer.
Brush.
Building level.
Construction foam and pistol.
A set of plastic substrates or wooden bars.
Cement, gypsum solution or glue to install bars to the necessary height or to raise the level of the base.
Sealant.
Malyary Scotch.
Stationery knife.

Installation process

Regardless of whether the suboolent plate is installed by a specialized assembly brigade or a newcomer in this case, the entire process of installing PVC plates can be divided into several stages.

Preparatory stage

It follows the place where the PVC plate is planned to be placed, namely the lower part of the window opening and side window slopes. The windowsill should be a bit into the wall on the sides, therefore, in the slopes it is necessary to cut the connectors with a depth 1-2 cm on each side to start a plastic plate there. To do this, the windows canvas are applied to the wall and make marks for feeding with a pencil or marker. Next, the grooves are gently choose so that the windowsill freely in them entered them. This work requires accuracy to do after not to restore roughly damaged slopes and not close large holes in the slopes.

Important! In order to minimize the procedure for restoring slopes, it is worth treating them as careful as possible in the process of mounting the windowsill.

If the angles of slopes were aligned using metal perforated corners, then it should be carefully cropped with a metal corner with a grinder. Bulgarian is also advisable to make a horizontal washed in a slope. The rest of the deepening in the wall is convenient to do with the help of the chisels and the hammer. These tools are most suitable if the plot material is the gypsum plaster. If the slopes are made of concrete, then the deepening in the slope should be made using a perforator. The side grooves in the slopes serve as an additional support for the sides of the windows.

The bottom of the window opening and the coaching profile, which is located under the window frame and is used for mounting the windowsill, should be cleaned of pieces of plaster, concrete and bricks, which appeared in the process of creating grooves in the slopes. After that, with the help of a brush, all the remnants of garbage and dust. Purified surface should be moisturized. It is necessary for the best hitch of the mounting foam with the surface on which the bottomroom canvas will be located. It is desirable not just wet the surface with water, but to use primer for these purposes. The soil strengthens the surface, dusts it and moisturizes at the same time. The brush is generously applied to the surface of the ground, impregnate all the fots, bulges, pores, cracks.

Important! In order to do not blow from under the windowsill, it is necessary to check the quality of the foaming of the window frame and, if necessary, eliminate all the shortcomings at the preparatory stage of the work.

Underlooking the windowsill

AND maus is a ready-made sub-mounted canvas, it is necessary to cut out a blank for the windowsill. To do this, you need to calculate the length and width of the future window sill. The length of the windows plate should be greater than the length of the surface for the windowsill, and go beyond the slopes. The length of these protrusions depends on the individual taste preferences, usually 5-7 cm on each side, but it can be limited to a protrusion of 1-2 cm.

The width of the workpiece is calculated by summing:

windows surface widths;
depths on which the stove is started under the window in the coach profile (usually about 20 mm);
the protruding part of the sub-beam, which should not be more than 100 mm, so as not to prevent the passage of heat from the battery.

At the edges of the windows, it is necessary to cut rectangles that interfere with the cloth under the slope. The plastic cloth is cut fairly easy. Cutting tool You can choose any: grinder, hacksaw, electrolovka. All jar, irregularities and other small trim defects will be covered with end plastic lining.

After the workpiece is ready, it must be done on the spot, that is, put on the lower part of the window opening and start in the deepening of the slopes and inside the underlying profile. If at fitting some inaccuracies are identified, they should be eliminated until the final mounting of the windowsill.

Installation of strip

Some installers install the windowsill strictly perpendicular to the window, a metal square is used to control. However, most experts believe that the correctly installed windows plate must have a small degree of inclination inside the room so that in the event of a moisture appear it flows down.

To fix the desired option to install the workpiece of the windows plate, it is necessary to put plastic gaskets or wooden bars along its plane. Their sizes should be selected so that the surface of the PVC plate is perfectly smooth. To install one windowsill, you need a minimum of 3 supports (one in the middle and two closer to the edges). The distance between the supports should not exceed the half-meter. In order for gaskets or wooden bars not to shift, it is desirable to glue the silicone sealant, a gypsum or cement solution.

Important! The process of fitting and installing PVC windowsill must be constantly monitored by the construction level.

The supports of the subcast plate should be placed on such a level so that when using the windowsill, the gaps between the windowsill and the window frame do not appear. If the support is compliance with this requires above 40 mm, it is unacceptable. A layer of foam exceeding 40 mm will not be high quality, it will be emptiness, it will not be able to withstand the necessary load, as well as thermal insulation properties will be insufficient. In this case, before placing lining under the submap slab, you need to raise the level of the lower part of the window opening. It can be done by cement or plaster plaster, bulk floors, etc.

Installation

At the preparatory stage of the installation of the subcast plate, we cleaned the lower part of the window opening, strengthened and moistened to the primer. By the time the windowsill, the primer was already dried, and for better adhesion and accelerate the process of hardening the surface foam, with which the mounting foam should be inhibited. Consequently, it is necessary to moisten both the lower part of the window opening and the lower part of the windows plates. PVC stove is covered with a protective film. The edges of the windows, which will be mounted under the frame of the window and in the openings of the slopes must be cleaned of the protective film.

On the other parts of the windowsill, the film is preferably preserved until the end of all repair work. In order to do not blow up from under the windowsill, the first thing is necessary to make a slightly to fit the space between the lower part of the window opening and the windows underground profile. Then the foam is applied with a wide strip under the far edge of the windows, and then dense stripes on the entire plane of the base. For the convenience of applying foam, additional extension nozzles are used.

Important! The height of the foam should not be greater than the level of supported under the windowsill supports. When swapping, the main thing is not to overdo it.

When frozen foam increases in volume on so much that it is capable of raising the windows and up. To prevent such a nuisance, on PVC slab, you need to put any cargo. Control is desirable to put something flat so that the weight extends evenly. The cargo should be put on the inner edge of the window sill, as the outer edge and so will be securely pressed by the window block.

Check deviations

We check again, there is no slot, it is exactly installed by the windowsill, Are the same protrusions on the edges, whether the necessary slope is kept. In the case of the detection of small irregularities during the first two hours after installation, they are simply fixed enough. Perhaps you need to make several shocks with a hammer in the desired direction, and the formation of pits or bugs can be aligned with the movement of the cargo on the surface of the subscal plate.

Seeling gaps

Clauses and cracks appear in the joints of the windows and slope, the windows and windows, as well as windows and slopes. Obviously, it is advisable to correct such drawbacks after all the basic elements (window, windowsill and slope) will be installed.

Separation of gaps is carried out with the help of silicone sealant, which is applied with a thin strip in the joints of the joints. The edges of the surfaces that the sealant should not get, it is advisable to take the painted scotch in advance. Moreover, the surplus sealant and the greasy tape should be removed immediately after applying the sealant. After its drying, it will be much more difficult to do, and the result will be less neat. Excessive dry foam under the submap slab should be removed. Foam is easily cut by a stationery knife. The resulting recess should be filled with conventional plaster for the walls.

Excessive foam under the submarines should be removed so that the thickness of the plastering layer is at least 1 cm. Such a layer will be securely lying and not sold at further work and operation.

Installation of presses

At the final stage, the side edges of the window sill are protected by end plugs, and the windowsill itself cleaned from the protective film.

What to wash the windowsill

When ordinary home remedies, such as: Soap, soda, vinegar, dental powder, chalk turned out to be powerless in the fight against pollution to help special chemicals will come. The choice of modern household chemicals can cope with any pollution on the plastic surface. You only need to correctly formulate your problem to the seller-consultant in the household chemical department, emphasizing that it is necessary to determine the plastic cleaning agent.

Careful operation and regular care will help avoid problems associated with laundering complex pollution. The main thing is not to use metal scrapers and abrasive drugs: they leave scratches, in which the dirt accumulates.

Install the windows plate with your own hands or use the services of a specialized building brigade - to solve you. In fact, the process of installing the windowsill is not complicated, however, it requires or acquiring the necessary tools, consumables (the remains of which can no longer be useful) and work skills. If the first attempt to install PVC slabs with your own hands will be unsuccessful, then the total expenses for an independent installation may be much larger than the wage of the wizard.

Video: how to install the windowsill do it yourself

Was this article useful?

Thank you for your opinion!

Write in the comments to what questions you did not receive a response, we will definitely react!

37 once already
helped

Plastic windows in recent years have become an integral element of any interior. Regardless of the style of the room, it put energy-efficient plastic windows and window sills from the same material. It is durable, and thanks to a large assortment of decorative films, and very beautiful material firmly entered our lives. The article will discuss how to lock the plastic windowsill correctly.

Advantages of plastic windowsill

Most popular materials for window sills: wood, plastic and stone.

Wooden window sills are too picky and require constant care. In addition, over time, they dissolve or damage from frequent staining.
Stone window sills are definitely durable and beautiful, but very expensive and independently install them.
Plastic window sills are not just durable, light and beautiful, according to its technical characteristics, they best coincide with windows from PVC profile, which will make care of them simpler.

In addition, the operational period will be the same, therefore, mounted the window, slopes and window sills, do not have to replace or restore some one element.
If the window frame has lamination, the same film is selected for the windowsill.
Thanks to its properties, plastic is resistant to moisture, so even with a possible condensate on the windows it will not start rot. With regular care, it does not form mold, as the surface does not have microcracks.
Lower price than a wooden or stone window sill of the same size.
Resistant to aggressive chemical environment.
Thanks to the light weight and plasticity of the material, it is easy to cut and installed independently without special tools.
Plastic window sill is not a cast stove. It consists of transverse cameras. This not only reduces the weight, but also serve as an additional thermal insulation.
More expensive model PVC windowsill have a special coating that makes it resistant to high temperatures and mechanical damage.

The lack of them is only one - low strength.

How plastic window sills make

There are no official classification of plastic windows, but conventionally divided into several types.

Standard plastic window sills. They are most popular. They are made in white color, width from 20 to 100 cm in increments of 5 cm. It has the lowest resistance to mechanical damage.

Thermo and shockproof plastic window sills. Rationally mount them into wide openings that perform the function of the working surface. For example, when the kitchen windowsill is used as a table. Special strength of the product gives lamination with a special film.
Laminated window sills. They are more beautiful, but their characteristics remain the same. Films not only give the color to the windowsill, but can imitate natural materials (stone, wood). Despite the fact that the lamination method is reliable, a number of manufacturers offer window sills, which have an acrylic layer on top of the lamination. In this case, the surface strength rises several times (however, as cost and weight, too, that there is no advantage of it).
Panels are made by extruding the extruder PVC billet. The surface is laminated by the film, which gives the windowsill, smoothness and further protects its surface from damage. The windowsill thickness varies from 1.8 to 2.2 cm.

How to choose a plastic window sill

At first glance, all the windowsill are the same and there is a desire to acquire the cheapest. But professionals know several nuances that will help choose the highest quality product.

The plastic windowsill must be made of high-quality raw materials, which passed quality check for human safety. This can be traced only by product certificate.
Also in the store must provide detailed characteristics of the material. They include resistance to UV rays (especially important for colored products), mechanical strength and resistance to condensate formation.

Having obtained all the necessary information, select the model suitable for design and size.

It is best to choose a white window sill. This is due to the fact that it is guaranteed not to fade under the influence of direct sunlight. And small scratches on it will be practically invisible, unlike color models.

Tip: Cheap plastic can be yellowed in a few years, so white window sills are recommended to choose from the average price segment.

The plastic window sill, regardless of the price and the manufacturer, is a panel, inside which the ribs of stiffness with a thickness of 1.5 - 3 mm and air chambers between them. It is the number of ribs stiffness and is responsible for the strength of the windowsill. Than their number is higher, the greater the load he can withstand.
The panel has a standard length of 600 cm. You can buy and cut them on your own, or order ready-made individually.

Tip: In order not to make a mistake in preliminary calculations, it is recommended to call the measurer.

The width of the panels is from 20 to 100 cm. Initially, the step to an increase is 5 cm, after 60 cm - 10 cm. Based on this, the inner size of the window opening (depth) is measured. Since the windowsill must act forward (but not completely close the radiator), add another 10 cm.
For example, the depth of the windowsill in the panel house is 15 cm, add another 10, and it will turn out 25 cm - the required width of the panel.

Preparation of walls before installing a plastic window sill

Before installing plastic windowsills with their own hands, you need to prepare the walls.

At first, from the window opening, they remove all the garbage and deemed it so that in the future the mounting foam had the best adhesion. It is especially important to do this if the installation is made instead of an old wooden window sill.
The side walls of the window opening are called slopes. Often the windowsill are placed simply from the edge to the edge, but it is wrong. The secrets of the window sill installation is to burst on the sides in the wall on the wall 2-4 cm. For this perforator, recesses are made.

What you need to install PVC windowsill

If the work is made in a wooden house, the number of tools will need minimal, in concrete and brick houses everything is more complicated.

Perforator;
bulgarian;
level 1 m long;
mounting foam and gun for her;
stationery knife;
wedges (from MDF, laminate or wood).

How to put a window sill on a plastic window with your own hands

Important: The windowsill should not close the battery. Violated air circulation will result in condensate on the windows.

Having accurate dimensions, the windowsill is cut off with a grinder to the necessary parameters, taking into account the protrusions along the walls by 2-4 cm on each side. If the window opening has a complex configuration, first on the cardboard the layout is cut and make fittings. If everything is suitable, the outline is transferred to the panel.
If the house is not new, and the opening is much lower than the groove under the frame of the plastic window, which is provided for the windowsill, first put the rusties to the desired height. The prepared windowsill are then introduced into the groove between the window profile and the foam to a depth of 2 cm.
After that, with the help of a level, it is starting to adjust its evenness. It is possible to do above or below by thin wooden wedges, which either raise or lower the windowsill until the desired height. They have them at a distance of 30-40 cm apart. In the future, they will remain inside the design and will play the role of retaining elements.

Tip: Install the windowsill need with a slight inclination towards the room, literally 5 mm. This will allow condensate to roll, and not to remain in the frame.

Then it is necessary to fit the space under the windowsill. It is best to use a two-component foam that does not expand. When using usual, you will have to fill the surface of the window sill with heavy loads. To do this, there are heavy bags with construction mixtures, large jars with water, etc.
After the day, the load can be removed, and the excess foam cut off the stationery knife.
Decorative plugs are worn as the final stage on the sides of the window sills.

The location of the window sill to the internal discovery of plastic windows is closed with corners.

How to fasten the windowsill to the plastic window photo

Tips for installing the windowsill plastic with their own hands

The process of polymerization (solidification) of the mounting foam passes much faster in a humid environment. Therefore, before filling the space under the windowsill foam, it is wetted from a sprayer or any other sprayer.
It is not recommended to pour too much foam. Since it has properties to expand several times and can pour out the window sill up, despite the cargo. To avoid this, there are small gaps that are guaranteed to close the foam, which are guaranteed to close when expanding.
If there is no possibility to start the window sill panel in the slopes and under the window profile, then it is customized perfectly accurately. All connections are treated with colorless silicone sealant.

Installation of plastic windowsill do it yourself video