What can be made from the usual lighter. Crafts from lighters. Idea - what to do from the lighter from the gas

Surely every home has such unnecessary and seem to be completely useless ending disposable lighters. But who are these lighters, involuntarily attract the eyes and admire. Try and you give the second life with old lighters without gas!

Of course, the products from this material will not call, because for their manufacture you will need work with adult tools and glue. But the baby will be able to watch exactly how you create beautiful crafts Of the seemingly very unnecessary thing.

So in order to create crafts from lighters - The beautiful lampshade you will need old one-time lighters in quite significant quantities. With the help of bruises, grind their multi-colored plastic parts into small pieces, hinged pieces of each color in separate bubbles.

Now make sections for lampshar, they can make them make it possible from old DVD podcasts. Inside each section should be glued with transparent plastic, which will hold Kroshevo from lighters. To subsequently glue the sections among themselves in the form of a cylinder, use glue for plastic.

Now inside each section, it is necessary to fall asleep pieces of lighters of a certain color and inject gel glue from the syringe. Rice the filler surface and wait until the glue dries. As a result, beautiful multicolored "glass" sections are obtained, in which the light comes from the light bulb perfectly.

Also, from disassembled lighters you can make the original motorcycles.

Perhaps someone is surprised, but such devices are not chosen for the manifestation of their creative potential, since their parts will be able to become details of a full-fledged designer. For example, the most common way for what can be made from a lighter is, or rather, of several copies of this accessory, it is the manufacture of miniature motorcycles that can become a decent decoration of a private collection, and even take part in some unusual competition. Moreover, you should not fear that it will not be able to cope with the task, because this process is not only easy to perform, but also very fascinating and often develops to the most present hobby. But before you begin to design this remarkable thumbnail, you should carefully disassemble the lighters up to the smallest details.

To do this, first remove the metal head of the device, wheel and gently descend the available gas in the pre-prepared container. It is important to dismantle all the components of the elements in full target and preservation, and they need to be added according to individual groups, carrying out, a kind of sorting. After that, they start assembling a miniature motorcycle using almost every item as a spare part to it. To do this, first perform a diagonal connection between the two metal heads, for which it is done in one of them through a hole with a hot needle for a future fastening. As the most fastener element, the heel is used with a spring on it, which is also taken from the design of a disposable lighter, after dismissing its protective covers.

The fastener is formed from the plastic fuse, by cutting its ring into two parts by cutting it. Thanks to this part, it is possible to connect the steering part made of disposable lighters metal heads, with a wheel for which a silicon wheel hidden under this head is used to burn sparks. To provide rigid fixation, the connection of the data of the elements is subjected to a soldering, for which it is possible to use a candle flame or, to an extreme case, gluing by means of a two-component polymer. After the work is finally done, proceed to the manufacture of the steering wheel of the motorcycle, for which it is possible to use the straw-used straw used for supplying liquid gas. And only the upper part of this device is suitable with a characteristic rounding of a larger diameter at its end.

The total length of each steering branch should not exceed five millimeters, and to insert them with a narrower part in the predetermined holes in the "steering column" whose role is played with metal heads lighters interconnected with a springs with a spring. It should be remembered that these metal plugs are installed in the latter queue, and they are given such a functional and aesthetic load as the imitation of the front bumper, which for a more massive type is made double, planting both plugs one to another. The back of such a wonderful vehicle in miniature can be decorated with one or two "turbines". For this purpose, studs with springs, which were used earlier as an auxiliary connecting agent will begin again. Such crafts are able to maintain equilibrium and freely move along the horizontal surface.

If you wish, they can be painted in any other color after squeaking, degreasing and primer, using enamel or even decorate their side or front panels using miniature thematic stickers in the form of flags of some country, sports emblems of motocross, etc. Amazingly, But a disposable lighter is a much more multifunctional device than you can think at first glance. For example, it is possible to make such interesting children's crafts, like a self-stitch (in the form of a matchman or even a mini-crossing), a water gun (water is refilled into a lighter using a one-time syringe) or mini-petard (in this case, you need to be Extremely careful and perform the craft only together with adults, carefully following all the points of instructions).

Good time of day, ladies and gentlemen 🙂 With the onset of cold weather, it became more time for creativity, that's a new one under the tree. This time I decided to do the original lighter "bubble" in the style of the steampunk, as always did his under the tree Without any drawings with a minimum idea in complete improvisation.

Initially, did from an ordinary transparent bubble from under some kind of medicine. From the sheet brass cut two strips to make the clamp.

On the neck, the bubble arched two halves of the clamp.

Drilled holes for fasteners of two halves together, after started thinking about the lid,

The lid decided to lay from brass coin. Flying with all identification signs, drilled a pair of holes for wicks and silicon wheels. After began to wise, as it all together to connect ... From the same leaf brass cut the plate and treated it diligently nadfil. Then betrayed the elegant form of the part, fed to each other. Whiled all together. The most important detail of my lighter was released.

Naturally, if there is no gasket between the metal part and the glass bubble, then the whole liquid will simply follow. Initially, I wanted to make a gasket from the original cover of the bubble, but by spoiling a couple of pieces decided that the tailing with the lid would not suit this to take the rubber gasket (I think I don't remember from the mixer, I don't remember exactly), in general, as the native has become in place. The nail of the "bubble" program, as early, was said (initially there was a simple transparent bubble), somehow did not fit into the idea ... Break All home first aid kits found a handsome from brown glass and mosaic formed. 🙂

Lighter is such a useful thing, and we drag it underwent. Why do this, when there are a lot of applications for a rather complex mechanism from which it is made. Look at the rollers, and some of the ideas will be useful to you. Or maybe even a lot.

Idea - what to do from the lighter from the gas

Roman Ursa made a thing that can be applied in practice. Not many such developments, but this is innovation, like other ideas of this master.

An interesting video appeared on Simple Maker's blog, which shows the use of the old fighter from consuming, which, together with this method, can get a second life. From unnecessary already, but so still capable of a lot, old lighter?

The author of the roller offers to make a surprise in the form of a water pistol. For the manufacture of this toy, we will need a simple cheapest lighter worth a few rubles. It must be fully disassembled.

First, we remove the wheel, pull out the spring, separate the rest of the snap. Next, we unscrew the plug, which holds inside the gas; It is necessary to release it out. If you use a lighter in which there is gas, for example, a new one, then it should not be done in the room. Gas is harmful to health and even in small quantities should not risk. We take a small piece of the rod from the ballpoint handles and extend from one end. To do this, you can use a preheated nail.

After that, insert the rod into the lighter and tighten the plug. Next, we separate the needle from the nozzle of the syringe. We recruit 3 cubes of water and 2 air cubes. Click on the trigger hook lighters and squeeze the air and water mixture there. Return the lever in place.

As a result of all actions, we get a lighter, inside of which water and air are under pressure. If you click on the lever, that under the action of compressed air there will be a sharp release of water outward. By the way, you can use the lighter valve and for other containers, the dimensions of which will allow you to accumulate more water and compressed air. You just need to come up with an adapter for it. So that you can use a trigger lighter, you just need to make an adapter between the casing of the lighter and, for example, a plastic bottle. Interestingly, to what pressure can you pump up such a container with a syringe with water and air?