Automobile compressor for PVC boat review. Adapter to the car pump for pumping boats. To negative moments can be attributed

The presence of a water vehicle not only gives freedom of movement, but also allows creating comfortable conditions for high-quality fishing. Today, in the market of fishing goods, a huge selection of swimming agents, but boats from polyvinyl chloride (PVC) acquired the greatest popularity.

Water vehicles from PVC - Material are characterized by good performance: high strength, ease, ease of use, high water resistance.

To bring the boat into a working condition, it is necessary to fill it with air, inflate. As auxiliary, manufacturers provided special devices - pumps. Among the variety of devices, the pumps for PVC boats are well proven well.

Contents.

Advantages and disadvantages of electrical pumps

The positive qualities of special devices operating from an electrical power source can be attributed:

Speed. Unlike mechanical pumps, electrical appliances make it possible to prevail the double flooded flooring in just 10-15 minutes.
Practicality. With the help of the device, you can not only fill the cylinders of the boat by air, but also pump the car tires, inflatable mattresses and other rubber products.
Does not require physical effort, Join the valves and the device are ready to use.
Availability of pressure gauge and reverseThat allows you to control the density of the air and not to release it back.
The ability of reverse to produce a reverse cycle.
The presence of a built-in adapter. The electric motor can be powered by the network, saving the battery energy.

To negative moments include:

Electric power source requirements. As a rule, the requirements are presented to a car or stationary battery with a sufficient charge of energy.
Cost of electrical appliance.

Given the large range of models, get a high-quality device at an optimal price is quite real.

Types of pumps

Electric units for PVC inflatable boats - material are classified as follows, according to the provision of pressure:

Low typeWhere in a relatively short period of time, the PVC boat is pumped by air, but in most cases such a pressure is not enough to bring the vessel into the working condition. Additionally, foot pumps are used.
Middle and high type. Electrical appliances providing secondary and high pressure are capable of raising a boat as quickly and efficiently without the use of auxiliary means. Another advantage of such a decision is the fully automated process of filling the cylinders of the plaeliness, there is no need to constantly attend and control the device. The main thing is to configure the unit for downloading the required pressure and connect to the power source.

Electric pumps for water tools from PVC - material can be of two types, depending on the type of power supply:

Operating from the networkThat frees the owner from control over the degree of battery charging. But, while using the pump requires a power source;
Battery running. There are external (removable) and internal batteries. In removable models laid a spare battery. The market presents devices for pumping inflatable floats working from a car battery, which is very convenient.

Choosing a pump

Choosing a product with electric drives, you should pay attention to the following parameters:

Case material. Release pumps in a plastic case, but the priority value has an internal metal filling.
The presence of two cameras. High pressure electrical devices are equipped with two cameras, since their design contains a diaphragm and piston mechanism.
Pressure regulator (RD). The presence of RD allows you to prevent the pumping of cylinders and maintain the integrity of the floating walls. Depending on the pressure regulator settings, the compress stops its work, reaching a certain mark, without the participation of the owner.
Electrical capacity. The optimal version of a reliable device is a model up to 450 mbar and a performance indicator up to 500 l / min.
Availability of reversal and check valvethat will significantly simplify the air injection when the boat is inflated, and release it from the compartments when assembling the vessel.
Power supply. Effectively acquire models with the possibility of nutrition from a network or mobile source.

Output: It is not advisable to use low-pressure aggregates, it will not work with high-quality water vehicle from PVC. A poorly punched water is a danger to all on board the vessel.

Rating pumps

To choose a high-quality electric pump for PVC boats, it is recommended to familiarize yourself with the most popular models today:

This is a standard small-sized device with a removable battery of 12 V, with a capacity of 150 l / min. An inflatable boat loading time with a length of 3.5 m is 20 minutes. The advantage of the pump is the built-in pressure sensor. Cons: High noise indicator, high the cost of the device is 4,000 rubles.

The high-pressure model is distinguished by a sufficient capacity of 1000 l / min, silent operation. The compressor is able to fill in the compartments of 4 - meter floating conditions in 4 minutes. The unit can receive food, both from the electrical network and from the remote battery. The device has a reverse and RD. The price is quite justified by quality - 10,000 rubles.

This is a standard two-section model equipped with a pressure regulator, a removable battery, reverse. Advantages of an electric pump: minor weight (1.5 kg), a special storage case. Quite good productivity of the device allows you to pump up a 3.8 m in length in 4 minutes, 7.5 m in 15 minutes. The capacity of 800 mbar is more designed for large water tools with an inflatable bottom. Product price 12000 rub.

The electrical appartment is ideal for amateur fishing. His performance: Performance of 450 l / minute, pressure regulator up to 300 mbar, offline removable battery operation is 15 minutes. Price 7500 rub.

The pump from the Chinese manufacturer, adequately copes with the tasks of injection and release of air, is characterized by a capacity of 195 W, with a capacity of 750 l / min. Excellent value for money and quality. Price model 4000 rubles.

Operation of pump

Extend the operational service life of the boat unit can be performed by following the following rules:

The device must be included after connecting to the boat valve and during the operation of the automotive motor. Such an installation will prevent uneven air distribution inside compartments.
A special boat pumping device must be installed exclusively on a flat surface.And be protected from ultraviolet.
During transport and at the time of use It should be carefully refer to the instrument housing.
Keep the compressor is required in pure form, avoiding the hose fluctuations. It should be known that the pump housing is afraid of low temperatures, the likelihood of plastic damage is great.
To protect the aggregate from mechanical damage During transportation and storage, it is recommended to use a special case, bag.
Periodically, it is necessary to make an inspection of the device, clean it from various contaminants. Given the specifics of fishing, the likelihood of moisture on the device is large, it is recommended to carefully dry the compressor.

Create an electric blower of air is recommended from proven manufacturers and in specialized outlets where you can get a guarantee for the device.
Select the boat pump is necessary in accordance with the size of the flooded.
Particular attention is recommended to refer to the technical characteristics of the device (power, performance, etc.).
Observe the rules of operation and storage of the device.

The boat pump is a very useful device, greatly facilitating the process of pumping the product. In some cases, people prefer general purpose models or pumps for cars. But in the use of the apparatus collected specifically for the boat, there are a number of advantages.

Specialized technique always has several advantages over usual, whether it is an electric pump for a boat or something else. The main criterion serves performance of the device. The capacity of the compressor is calculated taking into account the rubber product parameter, so there should be no problems during operation.

Many are wondering why to acquire a specialized device if you can pump up the PVC boat by the automotive compressor with their own hands? Of course, you can pump the boat, but the whole number of difficulties will arise. The car pump is not designed for pumping such volumes, so to completely fill the PVC product with air, it will take a lot of time. Not everyone is ready to spend so much time waiting time, sitting on the river bank. In most cases, in most cases, an adapter may require an adapter for pumping the boat by a car compressor.

Types of pumps

PVC boat pumps are divided into two categories. Models capable of creating low pressure, as well as mean and high.

Low type of pressure Provides relative rapid pumping air, but such pressure is restarting for long, and it is not enough to bring the boat into operational condition. Most often, it is necessary to resort to the help of a foot pump.
Middle and high pressure. Models injecting medium and high pressure are capable of pumping the boat as quickly as possible. They do not require additional swap devices. Another essential plus is the complete autonomy of the process without human participation. Just connect the machine to the outlet and turn on the button.

Also the pumps are divided into manual, foot and electric. The latter are able to provide high pressure for the shortest possible time. Mostly pumps are selected depending on the size of the boat. Each manufacturer of PVC products equips its model with the simplest pump type "Frog". But to pump up such a boat to such an apparatus, there will have to make a lot of effort. That is why many fishermen prefer to initially acquire a more productive model.

Foot and manual pumps

Everything is relatively simple here. If the method of inflating the leg is most preferable, it remains to choose a model, suitable for the characteristics of the available boat.

For PVC boats no more than three meters having a 5 l chamber and 300 mbar pressure.
For a boat with a length of three to four meters, the volume of the chamber is up to 6.5 liters and pressure up to 400 mbar.
For any PVC boat, whose length is from four meters, a permissible volume is 6.5 liters, and the pressure is 500 mbar.

Manual pumps for inflatable boats, it is customary to distinguish by two main parameters.

For low-length boats (up to 4 meters), double action having a cylinder volume of 1.5 liters. The pressure is 500 mbar, and the length of the cylinder is 410 mm.
For all other boats having a length of more than 4 meters having a double action and a volume of 2.5 liters. The pressure in this case is 600 mbar, the cylinder has a length of 510 mm.

Manual pump

The convenience of using manual and foot pumps to pump the boat is quite dubious, but they do not need power supply, and they can be used in any, even the most deaf places. In addition, they are light and compact.

Electric pumps

The electric pump for the boat is the most convenient and functional solution. It requires only a power source. There may be two options here.

Also, electrical pumps are divided by the principle of action on centrifugal and piston. The first of them provide the pressure level up to 200 mbar, and the model with the piston principle of work - up to 800bbar.

There are some simple rules, sticking to which, it will be possible to purchase a model that is suitable precisely to the available PVC boat.

It is necessary to choose models with the greatest degree of protection of the case. This is very important if the device is operated in extreme conditions.
When choosing a model, you must be guided by reasonable principles, you should not choose what is cheaper or more expensive. Often, the question is not dependent on the price, but on the parameters of the available PVC product. In the case of an electric pump, it is necessary to take into account that its performance strictly corresponded to the boat parameters.
It is not necessary to acquire the "Nunes" models on which there is no manufacturer's name, but is only an index. The best thing give preference to famous brandsWell-proven itself in the market.
It is important that the membrane pump prevailed metal elements - This will significantly extend the service life.
A significant advantage will be the presence of a pump pressure sensor, as well as a regulator.

Overview of the best models of boat pumps

We give 5 models that have deserved positive feedback from many fishery lovers. In the mini-ranking there is both manual and electrical models (network and rechargeable) - everyone can choose a product for the soul.

The fifth line occupies hand pump From the well-known manufacturer "Intex". This model is designed primarily for those who prefer to travel light. It is simple and convenient to work as such a pump, and most importantly, after a long pumping, the palms do not hurt. The case is made in black, without the possibility of choice. Material of manufacture durable and durable plastic. For manual pumps, the last item is not a minus, because They are deprived of an automated supercharger. On the contrary, the plastic case is much easier, and, therefore, more convenient in transportation.

The device perfectly copes with pumping any PVC products. In the set goes set of various nipples and nozzles To connect to various subjects. The cost of the apparatus is 528 rubles. In addition to the set of nozzles, a durable hose from corrugations is attached to the pump.

inexpensive;
easy to use;
reliable;
takes up little space;
verified manufacturer;
various nozzles included;
stylish appearance.

low performance;
it will not work out to pump a large boat without low pressure supercharge;
short corrugated hose bundled.

4. Bestway.

In search of which pump should be paid to the model from "Besti". This is a wonderful device from the Chinese brand. The company is represented by the market for sufficient time and has positive feedback on its products. The device is offered in large retail chains at a price of 1299 rubles. Very favorable price for the electric pump, if we consider the model of competitors. A distinctive feature of this device is work from 220 V. It is enough just to connect it to the outlet and wait for the result. The pump will cope with any PVC product: boat, swimming pool, mattress. The device has small dimensions and is easily transported.

Electric pump Bestway 62097

Important! In the set of delivery there is only the aggregate itself and the hose. A set of adapters is invited to purchase separately.

A wonderful solution for those who have big boatrequiring a productive compressor at hand. The weight of the model is only 441 grams. Pump, tested by time and users.

high performance;
long warranty period;
famous brand;
reliability;
strong housing;
small size;
convenient to transport;
easy.

only works from the network;
no adapters included;
noisy.

3. Stermay.

The top three opens the well-known manufacturer of Stermei. This PVC boat pump is widely popular with fishermen. First of all, the model is acquired for a successful combination of cost and operational characteristics. You can buy a model in just 4940 rubles. The main advantage of this unit is work from battery. Included, you can find special tweezers (crocodiles), with which the machine is connected to the battery. It is very convenient in conditions when there is no place to connect to the outlet.

High pressure electrical stermay pump with "crocodiles", 12 V

The device is able to pump up to 230 liters per minute. The maximum operating pressure is 1.37 bar. Reflective work is not more than 15 minutes.

Tip! For the designated period, the device is able to plant the battery, so you should take care of shift.

Device made of plastic And it works from voltage 12 V. The number of intensity intensity steps is two. Very good apparatus that can be used away from civilization. Indispensable to all who are fond of fishing on the water.

high performance;
work from the battery;
optimal pressure in the system;
two discharge steps;
famous manufacturer;
15 minutes of continuous operation;
voltage is 12 V.

no pressure sensor;
plastic case;
strong vibration and hum.

2. GP-80

One of the most popular boot pumps today. GP-80 is rarely commercially commercially available because it is very often buying it.The average cost is 6362 rubles. This is a battery supercharger, which includes special "crocodiles" to connect to the "plus" and "minus" batteries. Also supplied with the pump durable corrugated hose And as many as eight nozzles for different types of boat nipples. The weight of the device is 3 kg. The model is made of impact-resistant plastic in bright yellow. Feature of the device, as well as the model above, is work from battery. This makes it possible to operate in nature.

reliability;
high performance;
strong housing;
small dimensions;
work from the battery;
operating voltage 12 V;
small weight.

quickly discharges the battery;
strong noise when working;
there is no sensor.

The best pump of today top-5, model Bravo BP12, the optimal choice in the average price category. The cost of the apparatus is only 4195 rubles. This is a durable and reliable unit capable create pressure up to 1000 mbar. This indicator is a decisive criterion, because For most modern boats, this pressure is enough in excess. What is important, the device is equipped with air pumping function. The weight of the device is only 1.7 kg, it is very convenient to take with you into the boat. Thanks to the "crocodiles", which comes in the kit, the pump can be powered by almost any battery with a voltage of 12 V. The maximum value of the current consumption is 20a, a completely standard indicator for most electrical pumps.

pumps a boat for 12-15 minutes;
included in the air hose;
detailed instruction manual;
low weight;
convenient dimensions;
very productive;
italian production.

the battery sits quickly;
gul when working;
the cost of the device.

Conclusion

Choose PVC boat pump can simply be, but for this it is necessary to take into account the parameters and criteria about which was described above. To acquire the necessary model, it is necessary to know well the characteristics of the boat itself, as well as familiarize themselves with the nuances of the selected pump type.

Acquisition of an inflatable boat requires the purchase of a high-performance pump. This is due to the fact that a lot of time goes onto the pumping pump type "frog", which is included in the boat. As a rule, preference is given to the electric pump, which runs from the car battery. Despite this, not every PVC boat owner is ready to buy an expensive thing.

The pump selection depends on various factors that can affect the selection process. To begin with, it should be decided on the prescription of the pump and its price. Before buying, it will not be superfluous to pay attention to the following characteristics of the model:

Permissiveness from the battery or car cigarette lighter. As a rule, centrifugal pumps operate from the on-board network of the car 12V. Constructions with greater performance are connected both to the battery and to the cigarette lighter. At the same time, there are models operating from the 220V network.
Boats having a length of up to 4 m, require an electric pump with a capacity of 300-400l per minute. Boats having a length of more than 4 meters require a pump with a capacity of up to 1000l per minute. The pump should provide an effort in 300-400 mbar so that it does not have to pump up the flooded by a manual pump, like a "frog".
The presence of a check valve for pumping air from cylinders. This feature makes it possible to perfectly pump out the air from the boat, which makes it possible to more tightly fold the boat for transportation.
The presence of a built-in pressure sensor, which allows the pump to function offline. At the same time, it disappears the need for air pressure control.
The presence of a built-in battery.

5 best electric pumps for boats PVC

It is distinguished by the presence of a built-in power regulator, which expands its functionality. Using a pump, it is possible to pump not only boats, but also other designs. In eight minutes, he can pump up a four-meter boat to optimal pressure.

The user can independently choose the working pressure. After pumping the design, the device itself is capable of turning off, which will save, for example, a boat from overpressure. With it, it is possible not only to pump up, but also to roll out the air. The pump kit includes connectors for various valve designs, which allows pumping various structures.

Technical characteristics of the device:

Supply voltage - 12 V.
Current consumption - up to 9 A.
Performance - 150 l / min.
Working pressure - 300 mbar.
Weight design - 1100g.

It is designed to obtain optimal pressure in air cylinders.

The package includes:

Hose to connect to the pump.
Electric cable with crocodile type terminals.
Set of adapters for various designs of valves.
Fitting, which connects the air hose with a compressor.
Mounted pressure control regulator.
Bag for transportation with the presence of the desired number of compartments.

To pump up the design you need:

Connect the air hose to the compressor and the inflated object.
Connect the electric pump to the battery through the crocodile clamps, observing the polarity.
Enable the machine by clicking on the "ON" button.
Set the required pressure on the sensor.
After performing all the preparatory operations, the START button is pressed.

To pump out the air from the boat, you should switch the air supply hose to another nozzle having the inscription "IN". All subsequent actions are the same as when pumping the boat. The body of the device does not have protection against moisture ingress, therefore, being near the reservoir, you need to be attentive enough to make the moisture to the device.

Technical characteristics of the electric pump:

The most created pressure is 250 mbar.
Performance - 1000 liters.
Current consumption - 45-60 A.
Power supply - 12 V.
Weight - 3.5 kg.

The pump model is designed to inflate large-sized inflatable boats from PVC.

The package includes:

Air supply tube
Cable with trips type "crocodile"
Set of adapters for valves
Mounted Pressure Control Indicator
Enable and disconnect the pump.
Bag for transportation.

The design consists of two separate blocks. The operation of the device begins with the start of the first module. When the first module goes to the maximum of working pressure, the second, more powerful module is included. When the second block is turned on, the pump operation becomes more noisy.

If the device does not switch, you should pay attention to the completeness of the battery charge and, if necessary, charge it. Although other reasons are also possible.

The boat is pumped as a result of the following steps:

Attach the air nozzle appropriately.
Connect the pump to the power supply.
Connect the pipe to the boat with the appropriate adapter.
The pressure regulator is set to the desired position, after which the "ON" button is pressed.

To pump out the air from the boat:

You need to switch the air hose to the air pumping nozzle.
Pumping is not autonomously, so you have to control this process.

Basic specifications:

Maximum operating pressure - 800 mbar.
Power supply - 12 V.
Current consumption - 15-20 A.
Weighs the device - 1.9 kg.

This pump is suitable for pumping downflows, with a working pressure of cylinders, not more than 300 mbar. It is always noted in the boat passport. Electronasus BRAVO BST 12 is designed based on a two-stage compressor, which allows to pump other inflatable structures.

The apparatus includes:

The electrical wire, a length of up to 3 meters, which can be connected both to the battery and to the cigarette lighter, as well as a set of connectors for various valve designs.
Mounted pressure regulator.
Air hose.

Characteristics of the device:

Power supply - 12 V.
Current consumption - 15 A.
Maximum pressure - 300 mbar.
Productivity - 500 l / min.
The mass of the device is 1.5 kg.

With this model, you can quickly both pump the boat and pump air from cylinders. It is able to work, both from the network 220 V and from the on-board network of the car, voltage 12 V.

The kit includes:

Pump.
Air pump tube with adapters.
Converter 220/12 V, as well as a connector for connecting to the cigarette lighter.
Warranty sheet.

The main characteristics of the model:

Manufacturer - Intex (China).
Power supply - 220/12 V.
Performance - 600 l / min.
Maximum pressure - 800 mbar.
Weight - 3.5 kg.
Dimensions - 260/160/110.

In order for the pump to please his owner with reliable and confident work, the following recommendations should be followed:

Turning on the pump only after a thorough check of all connections to reliability.
Work only with a fully charged battery.
The device must be installed on the same plane with a pumped object.
Do not leave the device under direct solar rays or in the cold.
Do not allow water to get and avoid mechanical damage to the case.
Do not allow hose running during operation.
It is not recommended to work without interruption for 20 minutes or more.
Transport only in the case that the device is equipped.

Depending on the pressure issued at the output, the electric pumps are divided into 3 categories:

Low pressure pumps (40 mbar). Are suitable for swinging small boats. After pre-paging, the boat is pumped with a mechanical pump (frog).
Middle Pressure Pumps (500 mbar). With their help, you can heal the air in the boat, up to 4 meters up to 4 meters inclusive, without additional swap.
High pressure pumps (800 mbar). Used to inflate large inflatable float conditions, as well as for pumping boats, with the bottom of Air Deck.

Why do you need a high pressure pump (up to 800-1000 mbar)?

As mentioned above, a similar pump serves to pump more overall devices. At the same time, it has an impressive cost. It is better to choose a pump depending on the type of boat and its characteristics.

The advantage of pumps is that the average size boat can be met for 10-15 minutes, without applying special efforts.

Plus to all, above said:

The presence of pressure indicator allows you to control the process of its work under control.
The presence of a reverse function makes it possible not only to quickly and efficiently pump the device, but also quickly and efficiently pump out air from it.
220/12 V power models allow you to save the battery and use it when there is no ability to connect to the network 220 V.

Along with the advantages, it should be noted the disadvantages that are counted:

The need to have a power source.
The device has a greater value.

For those who have not yet purchased the electric pump, it will be interesting to know:

Purchase similar devices is recommended only for well-known and proven manufacturers.
The pump is selected, based on the volumes of its floating.
Not bad if the design is equipped with a turbine-piston supercharger.

In other words, various factors are preceded by choosing the pump, which, one way or another, affect this process. The main factor that can be decisive is considered a financial factor. The more fisherman opportunity in terms of availability, the better the model can be purchased.

Moreover, the dependence on the possibilities can be traced in the presence of PVC boats, and most importantly, its size. Accordingly, the pump will be purchased. Although many fishermen still use a "frog" and only dream of an electric pump.

Adapter for the car pump for pumping boats and other things.

Excellent idea to replace expensive electric pump for boats, a car compressor, which is always in the car in the majority. There is no need to carry two pumps, you just need an adapter adapter for the pump. One side is suitable for most valves of PVC boat valves, the second side for the compressor.

Our online store site will help you choose everything you need from accessories for your PVC inflatable boat.

0 Reviews of the product Adapter for car pump for pumping boats

Delivery

Dear buyer!
The delivery service of our online store Tocamp works seven days a week. And we are glad that you have chosen our store. We deliver the goods within 1-3 business days from the date of the order formation. For more information, our managers will be provided with pleasure about the delivery time.

The minimum order amount is 500 rubles.

Delivery in Moscow

The cost of delivery in Moscow within the Moscow Ring Road 350 rubles.

When ordering in the amount of over 10,000 rubles and with weight less than 10 kilograms, delivery will be free, within the Moscow Ring Road

At the cost of the order less than 1000 rubles, the cost of delivery is 500 rubles.

Delivery across Russia

If you need to deliver goods to other cities of Russia, that is, several options.

1. You make an order, we confirm the presence of the goods you choose, you make an advance payment from 20% to 100% of the cost of the order, with the help of the Blitz Translation of Sberbank, transfer to our Sberbank Card or otherwise agreed and we send the selected item after receiving funds Russian Post or EMS by Russian Post. Upon receipt of the order, you will have to pay only the cost of the postal expenses that you can calculate on the website of the Russian Post ..
Our company gives a guarantee that after receiving money for postage and ordered goods, we will send it to the sharpening of 1-3 days.
Our company gives a guarantee that all ordered goods will be packed properly to ensure its integrity and safety. If we cannot send you the ordered product, we undertake to send you money back in the shortest possible time.

Sending oversized parcels only after prepayment!

You can track your package on the website of Russian Post.

2. Delivery of goods by the transport company is carried out under the condition of 100% prepayment.

Delivery to Russian Post and to the transport company costs 200 rubles.

Delivery to Moscow region

Shipping cost is calculated according to the scheme 350 rub. + 30 rubles. for kilometer.

Remember that the time spent on arrival to us may be much more expensive than the shipping cost.

Possible pickup.For self-level you should be sure to make an orderthrough the site where you specify the necessary product, after which our manager will contact you and clarify the time of self-delivery. Point self-delivery is located at: Moscow, Pyatnitsky highway 24 C 1

Summer ... So you want to rush somewhere in nature, enjoy the open air from the reservoir, fry kebabs, sunbathe, play volleyball or just go with your friends on fishing. There would be a car, there would be a desire, and there is always a place to stay. But, one way or another, it is difficult to present a vacation in nature without an inflatable mattress (a very popular beach holiday product), an inflatable boat, an inflatable pool for children, etc. All this should be in the arsenal of a modern dacket or tourist.

The inflatable boat, for example, today, perhaps, the best plaster for those who love fishing. However, such a boat is required: a) collect and b) inflate. Alas, if the inflatable boat has low pressure, it naturally loses its qualities. Therefore, always at hand there must be a pump for pumping. As a rule, the pumps are included with the pumps, but they are very simple, to pump a boat or mattress them will not be easy and takes a lot of time. In the market, of course, there are a large number of different pumps: manual, foot, electric. However, to choose a durable pump, convenient, and besides, it's enough to quickly inflated the boat of any size - the task is non-trivial. Or maybe there is a way to pump a boat without buying a pump for her? It turns out, there is - you can use a car compressor!

Agree, it is difficult to imagine the owner of an inflatable boat without a car. So why not take advantage of this, already existing enough powerful pump? Of course, this device is intended for dripping automotive tires - just so adapt it to the boat will not work (at least for purely geometric reasons). Need some kind of adapter, adapter. You can, of course, try to make it yourself (there are such craftsmen), but still more correctly, when there is (and successfully used) a special nozzle for podaching inflatable products. Not only boats, but also, of course, any other inflatable products.

Berkut trademark, known for its legendary car compressors, introduced a unique adapter under the article VT-300. This device is based on Venturi tube technology, named by the Italian scientist. The principle of operation is simple - the pressure of the air flow from the compressor is reduced by passing the narrowed pipe of the pipe. And the performance (volume of the supplied air) increases due to a special conjugate air duct. The Berkut VT-300 adapter connects to the compressor hose by means of a threaded connection and can be used together with nozzles intended for influencing and, of course, pumping out air from inflatable boats, mattresses, pools and all other products that require a fairly large amount of air.

Berkut brand adapter Easy to use. First you need to choose a nozzle (one of three in the kit) for pumping air, then connect it with the desired input, insert into the desired product (for example, in an air valve of an inflatable boat) and start pumping.

If the inflatable product, by means of the VT-300 nozzle, is not pumped up to the desired level of pressure, then the air duct (pumping output) can be closed with a finger (pumping output) in order to increase the air pressure. But keep in mind that long-term retention (blockage) of the outlet can cause pumping. So it is necessary to respect precautions!