How is homemade tire sawmills are made? Ribbon sawmill made with your own hands? Why not! Homemade tire mini panel

Not everyone may afford the purchase of the finished panel, especially since it is only with constant use (read commercial). Is it possible to make a panel with your own hands? What difficulties to deal with the self-dealer, decorated on the independent sawing of untreated logs on business wood?

Homemade belt pylorama

Let's notify immediately - it is very difficult to make the belt panel. The point is not so much in components, extensive turning and welding works, the need for sharpening and laying saws in a special way, but in the well-developed performance of the entire complex.

It is necessary to provide loading and stability of the motion up to 300 kg of one logs, adjusting the cutting thickness, and most importantly - safety equipment. But if the presence of darm wood won - we make the ribbon panel with your own hands.

The principle of tape cutting is explained by the example: take two coils from the threads, between them stretch the extension thin ribbon. Forcedly rotating the ribbon - cut the log, the distance between the ribbons is the maximum size of the bar. Ribbon saws are comfortable to cut the boards.

We begin with the choice of production area or premises - at least 3x6 m, verified. The second is the importance - the metal wheels of the cart and the ribbon saw, it is necessary to find or buy. Frame ribbon mechanism with wheels Order, and better to buy ready. An independent manufacture requires skills and a lot of high-precision tool processing.

View 1.: 1 - Rack; 2 - roller; 3 - plate; 4 - screw; 5 - chain; 6 - guiding the thorough; 7 - mobile rowing; 8 - screw; 9 - fixed rowing; 10 - Remote.
View of 2.: 1 - pulley to start the engine (if the three-phase motor is connected to a single-phase network); 2 - engine; 3 - pulley; 4 - shaft; 5 - housing with bearing; 6 - base; 7 - flywheel; 8 - finger; 9 - rod; 10 - saw; 11 - screw M14x2; 12 - roller; 13 - guide corner; 14 - rack; 15 - steering wheel; 16 - sleeve; 17 - Star; 18 - Nut M14x2; 19 - locknight; 20 - Star.

We establish the guides - any durable level metal: 2-way, channel, a corner, under 0.5 m of supports or anchor for stability. The distance between the guides is the diameter of the largest log with a margin - about 0.7 m. Withstanding geometry weld all together. On the trolley, the wheels, the frame of the ribbon mechanism, the electric motor through the pulley.

Consider a mechanism for changing the horizontal displacement of the saw relative to the log. By moving the cart on the fixed log, cut off the horizontal layer of wood - we make boards.

The greatest handicraft was obtained disk panels due to their versatility and ease of manufacture. We will make the disk panel with their own hands. The most important thing is that we need a disk saw - the disk is more than 500 mm (the more - the better). The drivers usually serves an electric motor, through an increase in pulley speed.

1 - sleepers basic (steel pipe 80x80x3, 5 pcs); 2 - Lining (steel sheet, 40x10x1.22 pcs.); 3 - web-guide (steel channel number 8, L1750, 4 pcs.); 4 - Trolley (Telfer carriage); 5 - Lower bracket (Steel Sweller No. 18, 2 pcs); 6 - stove - base (stylish sheet S5); 7 - bolt M20) (4 pcs.); 8 - Growler washer (4 pcs.); 9 - nut M20 (4 pcs.); 10 - asynchronous three-phase electric motor (220 V, 5 kW, 930 rpm); 11 - top bracket (steel corner 45 × 45); 12 - blade disk saw; 13 - protective casing (steel sheet S2); 14 - steel pin (8 pcs.); 15 - disk saw hub (ST5); 16 - handle resistant (water pipe 3/4 "); 17 - cutting hill; 18 - brazer stubborn (steel sheet S5); 19 - comb (steel corner 45 × 45, L400); 20 - log; 21 - bolt M30; 22-car cut; 23 - puck fixer (steel sheet SZ); 24 - persistent crossbar (steel corner 45 × 45); 25 - sleeved sleepers (steel pipe 80x40x3, 6 pcs.); 26 - pad for lengthening the web (steel sheet 250x180x10, 2 pcs.).

A welded frame is preparing, a metal (less than a wooden) plate with a slot is placed on the frame. The gaps between the disk and stove are minimal. The saw saw shaft on the bearings and pulley is mounted at the bottom of the bottom. The pulley of the electric motor and saws are connected by straps (reinsurance when the saw is jammed) - the homemade disk sawmaker can work!

one of the options for self-made disk sawmills

For belt tension, use the weight of the engine with the addition of weighting agents. Move the operating pad of the electric motor, make a movable coaxial shaft of the saw, with a deviation under the weight in the opposite direction. As a propultery, the wheel of the working tractor is used to drive with a saw blade without belts.

The principles of cutting are the same as in the tape cutting - we serve a log to the cutting disk. After the disk cutting, the surface of the lumber is higher due to the processing speed. Circular saws are vertical and horizontal - they are easier to apply in mobile installations.

Tire pylorama

You need to start with understanding what and how many will cut. If you need to cut 100 - 200 rafters for the houses under construction from the darma logs, then 400 boards - it is better to use manual professional chainsaw. We will make a homemade panel of chainsaws, a method inexpensive, simple and efficient.

drawing of the simplest panel of chainsaws (download a complete drawing)

It will take any smooth metal profile, welding and Bulgarian. We start with the maximum length of the log - practical about 4 m. You need to find a channel or a foreign one for such a length, you can cook from amplification pieces - the main thing that the resulting profile has been smooth. We begin to make our autonomous tire panel based on chainsaws.

The design is a powerful profile at the working height - above the belt, which moves in the trolley, the fastened chainsaw.

The height is caused by ergonomics, the long-lasting knee-elbow pose is not useful. In parallel, the main profile is mounted in a log on a support frame, a chainsaw moves along the log produces the necessary trimming.

Several more about features. The main element is the main profile that provides the geometrically correct lumber sizes, must be sufficiently strong and rigid if the channel is at least 200. The profile relies on 3 or more supports associated with the support frame that lies the log.

If you decide to make a chain sawmill with your own hands - be sure to look at the Logosol panels. Drawings and documentation can be downloaded on the site and take the basis of your homemade.

The main inchurities during sawing are formed when hesitations of the trolley with a chainsaw, therefore the promotion of the cart on the profile is at least four rigidly pressed metal wheels, it is necessary to provide manual drive. The easiest - knob's knob with a drive wheel on the main profile.

For the installation of heavy logs, tilts are usually set, along which it is convenient to push the log sequentially on the sides on the support frame, exposing it on the frame.

The most complicated is the adjusting mechanism of the thickness of the product. The simplest way is to install at the edges of a movable in the vertical plane of the support frame of screw or any rigid fixation jacks. Adjust the jacks - adjust the thickness of the product. An example of the construction of a mobile tire panel based on chainsaws can be viewed in the photo.

The cutting of wood can be performed by one person: keeping the handle chainsaws and adjusting gas, we carry out the second hand.

Conclusion

Several thoughts on the feasibility of the manufacture of the sawmills. Time and practice is checked - independent production makes sense with free materials. If you calculate the labor costs and materials, and the possible benefit, he will understand. The worst thing, with independent manufacture - few do not pay attention to the safety technique. This moment must be thought out necessarily! Trouble-free work and high-quality wood.

Residents of country sites often face the need to apply various woodworking devices that are used in domestic purposes on the household plot. Today in the manual and stationary construction tool market there is a wide selection of wood processing devices, but they are pretty expensive. The most sought-after are panels. In this article we will tell about how to make a tire saw.

Appointment of tire pylorama

Any construction work or maintenance of buildings are accompanied by colossal financial costs that are associated with wood processing, for example, sawing timber, billets, production of rafters, beams or furniture items.

The main task of the homemade tire sawing lies in a high-quality longitudinal cut of a logberry of any variety of wood for obtaining an unedged and edged board, veneer, rail, booster, timber, and sawing the sensor. Tire sawdust was created for the manufacture of small batches of lumber, processing non-format blanks for the manufacture of a special size of sawn timber.

Piloram tire gasoline does not need a large area and can easily be mounted on a limited land plot. There are stationary devices that operate from the electrical network, and autonomous, functioning on gasoline. The last option is very convenient for departure to the forest and the workpiece of the desired lumber in place.

The greatest length of the workpiece, which can be treated on the tire panel with their own hands, reaches seven meters. In this case, the cross section of the workpiece does not exceed 40 cm.

The average rate of cutting at the length of the board is equal to 3 m made of a pine log, a diameter of 25 cm, will be on a homemade tire panel of about 7 minutes.

Types of tire pylorars

You can create two types of tire machines independently:

with the movement of the working unit relative to the workpieces processed
with a longitudinal log feed method.

It is clear to say that some kind of pailoram is worse, but some better, it is impossible, because both types of pilots have their pros and cons. For example, during the movement of the working unit along the workpiece, a person can control the accompanying effort, ensuring a smoother course and cutting wood at high speed. And in the case of filing the workpiece towards the sawing mechanism, the control of sawing is significantly difficult. The smallest increase in the strength of the pushing of the wood becomes a sharp increase in the load on the tire and chain. As a result, the chain can jam or overheat the motor. However, such a variant of the sawmills does not have additional wires moving behind the main unit.

Of course, the final choice of the type of device depends on the individual needs of each person. However, regardless of the selected panel type, there is an increased attention to paying the creation of a qualitative basis that ensures the decrease in vibration. Metal chawliers or rails are the best basis on which tire sawdust will stand. Drawings of such devices in large quantities are present on the Internet. You only need to decide on the type of machine and you can start creating.

Before starting the assembly process, it is necessary to purchase all the materials and tools. In order to get a bus panel, the video of which is presented below, you will need:

accurate schematic drawing
metal Schweller or Rail
pipes of different diameters
electric motor
tire and leading stars from chainsaws
welding machine and electrodes
electric Bulgarian and Drill
hammer, roulette and chalk.

To make the tire sawmill, you can use the components of the usual chainsaw. The working part includes a tire, an electric power unit and the clutch system, which are located in a separate case.

First of all, you need to create a frame in the form of a rectangle. In the center of the base is a tire. Taking into account the fact that the framework will be exposed to high loads, it must be secured to secure on both sides. The leading stars often has a hole, which is intended for mounting the elements to a metal axis from high-strength alloy. The axis makes it possible to avoid moving the tire in the horizontal plane.

To prevent the vertical offset, it is necessary to attach two bearing on the axis to the axis on the axis from both sides. Next, you need to put on the sleeve, clamping bearings, after which the axis is worth a fight to one face of the frame.

On the opposite side will be placed an electric motor and a chain tension control system. It is not necessary to even invent anything, just use the factory spare parts from chainsaws. The main drum is attached to the electric power unit shaft and is fixed with the help of a longitudinal key.

The final stage of the assembly can be called centers and reliable fixation in the case. Special attention during the work of work, you need to pay the installation of a motor, which will vibrate strongly during sawing. For this reason, you need to provide a rigid bed.

Now you know how to make a bus panel with your own hands. Such an aggregate ensures the implementation of high-quality sawing wood. The main characteristics of the tire panel are accuracy, compactness, low price, simple design, reliability, low weight, ergonomics during operation, ease of transportation.

Homemade tire sawmill, video

Most suburban zone residents are familiar with the need to use various woodworking equipment, which is often used in domestic purposes on the household site. The modern market of manual and stationary construction tools is replete with various models of wood processing devices, to the most demanded of which can be attributed to the panel. In this case, such equipment is divided into devices of a tire, disk, frame and ribbon type, depending on the method of sawing the tree cutting.

What is used for tire sawmill?

For a long time, the wood is used for the manufacture of structures and items used in everyday life. At the same time, people constantly tried to improve woodworking equipment with their own hands. Hand saw, which not so long ago was considered the only mechanism for sawing the tree at home, slowly, but confidently passes its position, giving way to machines operating on electricity or liquid fuel, which greatly simplify human labor.

No construction costs without significant cash costs associated with wood processing: sawing boards, construction of rafter structures or the manufacture of furniture items. Naturally, all these items can be purchased in any trading network, but it is not always justified from a financial point of view. The person who got used to do everything with his own hands can be completely collect tire pyloram - The machine, thanks to which you can make any gazebo, wooden barn or garage box, bath or house from a log house and many other wood designs.

The main intended panel of the stroke of the construction is made with their own hands is high-quality sawing log in the longitudinal direction for the manufacture of unedged and edged boards, rails, flaws and other lumber used in construction. Homemade tire sawdresses were developed for the production of minor batches of wooden construction billets of non-standard sizes and processing of different wood breeds.

For the installation of sawing equipment of the tire design, a lot of space is required, which allows it to be used on a small plot of land. Naturally, such a panel will not be able to fully replace the rounded machine or cutter, but it is quite suitable for self-sinking timber and manufacturing boards. To date, there is a stationary equipment operating from electricity and sawmills that can be moved through the use of a gasoline engine, which is very convenient when the timber harvesting in the forest.

Constructions and types of tire pylomas

To date, you can consider two types of tire pyllars that actually make with their own hands:

with the movement of the working unit relative to the wood treated;
with a longitudinal way of filing wooden blanks.

At the same time, it is impossible to allocate any model that will be better, since both types of sawing equipment have both merits and disadvantages. So, when moving the working unit along the log, a person appears the opportunity control the accompanying effortThereby providing a uniform move and sawing wood at high speeds.

When feeding the logs towards the sawing mechanism, control of sawing is significantly complicated. It is sufficiently slightly to push the tree and it will immediately lead to a sharp increase in the load on the tire and chain. Because of this, the chain jacket or overheating of the motor can occur. But in such a mechanism there are no additional wires that move for the main unit. Naturally, the final selection of the design of the sawmill for manufacture with your own hands depends on the individual preferences of each person.

But regardless of the selected design, you need to worry about the construction of a high-quality basis, which reduce vibration. Most often for the base of self-made tire-type sawmills, metal chawliers or rails are used. The lower part of the frame is equipped with wheels to ensure the free movement of the sawmills or treated wooden billet.

Production of the sawmills with their own hands

Before switching to the assembly process, you need to worry about availability. materials and tools From the following list:

For the manufacture of tire panel with their own hands, spare parts from standard chainsaws are used. The working part consists of tires, electric motor and clutch systemswhich are placed in a separate case.

Stages of assembling sawing mechanism

Having gathered independently a pail of a tire type man, will receive an indispensable assistant to solve household problems. At the same time, for its independent assembly exists a certain sequence of events.

Close attention when working with your own hands you need decide the engine mountwhich in the process of work will vibrate strongly. Therefore, you need to take care so that the face will be sufficiently rigid.

Installing the design to the base

After assembling the working unit it is necessary mask on a metal frame, the manufacture of which with your own hands consists of simple actions.

Two blanks are welded from durable steel tubes, in shape resembling the letter "P". The tops of the obtained billets are fixed to each other by means of electrical welding or bolts.
Four nozzles placed vertically welded in the center of the frame. On each element on the outside there are several small recesses at a distance of 20 mm relative to each other to a depth of half the tube diameter.
Four tubes are also welded on the working unit, the inner cross section of which should correspond to the outer diameter of the nozzles placed on the base. The placement of the elements should be made in such a way that the nozzles on the working node were put on the tube of the bearing base.

This design is necessary to ensure the free movement of the sawing node in a vertical position. Fixation of the work unit In the required vertical position provided with bolts.

Stationary construction of tire panel

Sometimes the homemade sawing device is placed on a concrete base. Due to this, it is possible to provide a constant horizontality, but at the same time the process of splitting the sawing is significantly slowed down. To increase the convenience and efficiency of the panel of the tire, with their own hands, you can additionally install the intermediate transmitter mechanism - the clutch.

This will require between the leading gear and electric motor. mount the transfer of belt type. On the gear and the electric motor shaft are mounted for pulleys to which belts will be stretched. For pressing the belt, special rollers are used. To make it easier for work, you can borrow a ready-made design of a motoblock.

Having read the design and principle of the action of the tire sawdress, each wishing will be able to collect such a woodworking machine with their own hands. Such a sawing device discourages the logs on the boards of any thickness with sufficiently high accuracy. If a person plans to make a blank of a lumber or simply a large number of construction works related to the tree, then independent making a sawing machine Tire type will save a lot of time, forces and money when processing, bric, boards and other wooden products.

Chain sawmill is an indispensable assistant for any builder. Without it, no serious repairs will cost. Especially this tool is relevant for those who live in the private sector and often faces the problems of construction and repair.

What is a chain sawmill?

The principle of operation of the chain sawmill is to a certain extent resembles a ribbon machine: the sawn log is firmly fixed, while the saws are carried out due to the saw. Saw fastened to a moving carriage. The difference between the chain and tape sawmills consists only that in this embodiment only the chain saw is used, and not a tape.

The main disadvantage of the chain sawmill is lower performance and efficiency in comparison with tape devices. Despite such minuses, people use such machines precisely because of its not high cost and convenience, but real craftsmen and create chain sawmills with their own hands. Someone wants to save money, and someone just make the machine, fully satisfying all the individual wishes of the Master.

DIY chain sawmill

What is needed to create a chain sawmill with your own hands? To begin with, it is worth watching the drawings of the chain sawmill on the Internet. Drawings are different, but any such panel consists of chainsaws, steel frame and rail guides.

In order to create a chain sawmill, you need to firmly firm on the saw of the saw metal frame. The gap between the chain and the frame will be equal to the thickness of the resulting sawn timber. For this reason, you need to decide in advance what kind of lumber you need. By the way, if you make a distance between the chain and the frame, you can create not only boards, but also a bar.

The excellent box will turn out of two steel channels, 8 meters long, and 0.14 meters high. In addition, you can use rails or metal corners. We need the workpiece perfectly direct shape. Over the entire length of the channels, you need to make holes with a diameter of 14-16 millimeters at a distance of 1.5 meters.

According to the number of these holes, special screed ties are made of segments of the tap pipe. All parts are attached with spills with thread or bolts.

After that, you need to collect all the components of the chain sawdust into a single device and install on the rack. The number of racks depends on the dimensions of the bed. The most recent racks should be at a distance of no more than 1 meter from the end of the guides.

To give greater stiffness, you need to fix the disclosure.

After that, the movable trolley is mounted. It can be created from steel plate with a thickness of 4 to 6 millimeters, and about 0.6 meters long. The size of the trolley depends on the size of the electric motor.

Next, you can proceed to the selection of gaskets and clamping plates for the trolley. Elements should guarantee free movement of the mechanism. However, the gap should be minimal. The tie of the gaskets should be done with bolts.

Be sure to eliminate the transverse backlash, by mounting a stubborn corner to the trolley. The cart can be put on the bearings or rollers. Please note that the bearings are worth using new, the ex-in use is uniquely not suitable.

The chain must be pulled as much as possible. The steering wheel is mounted on one of the sleeves of the side sprockets located around the perimeter of the guides.

In order to create a locking device for a log, you need to take pipes with a diameter of 3-4 centimeters, insert movable rods included in the stopper at the required height of the M8 screw.

Top on the rods are attached pressed parts, the length of which is not 1.5 cm long, as well as cam clamps.

After that, you can install an electric motor and a saw, the diameter of which is 1 meter. The choice of chainsaws for home sawmills is also not a unavailable process. Chainsaw should have high power, high performance indicators. In addition, its chain must be well sharpened. Make a chain sawmill personally not difficult. But, remember that in addition to creating the device, it is important to guarantee safe operation.

It is thus created "home" chain sawmills. The video manufacturing process of such a panel is presented below.

Safety at work

Having high productivity, the panels are sources of increased production injuries. Many people heard terrible stories on the topic "turned off his head, and there is no longer a finger on his hand." There are many similar stories and all of them are real.

The most reliable method for reducing the number of injuries and accidents during the use of such equipment is the scrupulous compliance with all safety regulations. Before starting work, you need to familiarize yourself with the principles of work and instructions for the operation of such a device, as well as with the rules of fire safety.

The highest level of security is achieved when the sawmaker is equipped with a reversing feed system due to its design.

Chain sawmills, video

The inhabitants of small towns or towns are great, which in their lives the role is played by any woodworking equipment, which, most likely, had to be applied to many in their work. Nowadays, the construction market is shot by a large number of different models of woodworking equipment, and the sought-after are panels. All the sawmills are divided into frame, disc and tapes, which differ in the type of cutting tool. Tire sawdust from them is fundamentally distinguished by its own device.

Purpose of tire pylorama

A person has long used wood of various breeds for the manufacture of items, which is necessary for him for life. During this time, people worked on the modernization of woodworking equipment. The hand saws that were used earlier were practically awaited in the fly. They came to replace more modern and convenient machines, which are attributed to chainsaw, multi-step and edging machine, as well as tire sawdust.

Any construction or maintenance of buildings is accompanied by large cash spending, which is associated with wood processing: sawing timber, billet, production of rafters, beams or furniture parts. All this, of course, you can buy retail in the trading network, however, when buying a new tire sawmill, all expenses will pay off quickly, and with the help of your own woodworking machine you build a house, bath, garage, a country house and a summer gazebo.

The main purpose of the self-made tire sawdust consists in high-quality longitudinal sawmaking of a bricken of any breed of wood for the manufacture of an unedged and edged board, veneer, rails, booster, bar and sawing of the sensor. The sawmills of this type are designed to produce small batches of lumber, processing non-standard logs and obtaining special types of blanks.

Tire sawdresses do not require a large area for mounting and can be freely installed on a limited land plot. Of course, the chain sawmill will not be replaced by a rounding machine or a marcing cutter, but you can cut a bar and make the board you can do it with your own hands. In the photo of tires, the pilots you will see that there are multiple machines that work from the electrical network and are stationary installations, as well as autonomous options running on gasoline with which you can travel to the forest and harvest the desired lumber.

Construction of tire pyloram

Tire sawdust consists of beds, clamping stops, moving trolleys, rollers, carriages, electric motors, tires and chain saws. The bed of the sawmills has a small weight, so it can be transported in the trunk of a car. Tire sawmills can be relatively easy to move and install in close proximity to the log, which is cut into, in the warehouse of timber or construction plot.

You can paint on the bus sequer of almost any length. And if you provide in the drawing of the homemade bus panel with an additional installation of another section, it is so possible to increase the length of the log for a couple of meters. This is considered very beneficial in the construction of a house or a country house for the production of overlaps.

Pretty simple and convenient is the design of the clamping stops. Two clamps are located at the end and beginning of the log, the logs are pressed to stubborn flags. In the process of sawing, you can lower the stops on the respective level.

The movable cart can be installed from the steel plate, which has a thickness of 5-6 millimeters. It includes the steering wheel and stubborn corner. Then it is put on rollers or bearings. A chain from the combine can be used as a chain to move the trolley. The use of a sharpened chain saw of longitudinal sawing guarantees the presence of a smooth surface of the saw. Such a saw is fixed on a special carriage, which is moving through the rail through the bed.

Its role is perfectly performed by two steel channels, which have a length of 8 meters and a height of 0.14 meters. At a distance of meter-one and a half along the entire length of the channels, holes are done in which it is customary to install screeds, for example, from segments of the tap pipe. The whole design of the tire saws made with its own hands requires installation on the rack.

Three-phase electric motor can be a power unit on the tire sawing, which has a power of 5.5 kW, or an automatic four-stroke gasoline motor can be used, with a capacity of 5.5 horsepower. The heating rate in this case is 18.6 and 9.7 meters per second, respectively. The electric motor is placed on top at special welded corners.

The tire and chain on the sawmaker are applied ordinary. When sawing, the tire rigs eliminates the appearance of a series of defects, such as, for example, a wave, and the accuracy of sawing reaches a ± 1 millimeter by 6 meters of length. During the sawing, the thickness thickness of the cut is no longer more than when using a disk saw. At the end, it is installed a convenient locking device on the tire sawmaker, which is intended for fixing the log.

Principle of operation of the tire sawdust

The principle of operation of the tire panel is similar to the work of the panel of the belt. The log in the processing process lies motionless, and the sawt is carried out using a saw that is fixed on a moving carriage. The main difference between these models lies in the application of the chain saw attached to the bus.

The saw chain is much cheaper than those installed in ribbon panels, faster and easier prepared for work and is distinguished by a long service life. But the belt can not be used after work for 10 hours so that it restore its properties. If the incorrect is incorrectly produced or the divorce of teeth, then the belt cloth comes in disrepair, and the sawn timber is poor quality or unsuitable for use.

Thus, the use of a ribbon canvase in the private farm is associated with a variety of problems. Silent chains that are used in tire saws, do not need such care and careful preparation for work, as evidenced by the video about the tire panel with their own hands. The chain is sharpened and immediately installed on the saw. In addition, even with the poor quality of sharpening, the quality of cutting will not suffer: it will be different due to the tire rigidity, and the waviness and barrelness will not arise under any circumstances.

Tire sawdust can be installed in any rooms if the condition for protecting electrical equipment from precipitation is performed. It must be closed rooms or outdoor sites. Piloram is placed on a flat site. Under the railway with its absence, it is customary to put an anchor. Rail path and tire on the carriage exhibit horizontally.

The sawing on the tire panel is made in a horizontal plane by moving the carriage with a tire at the same manual way. Moving is carried out by guide elements relative to the log processed, which is located stationary. Height adjustment knob is manually rotated, lowering or lifting the tire.

To increase the time of useful service of the new chain, it is pre-recommended to immerse it into the oil and withstand the night in it. If the leading asterisk was worn out, you can not wear a new chain on it, as it is necessary to change the old asterisk, as shown on the video about the tire panel. Keep track during the operation of the chain behind its tension, which must be carefully adjusted, and behind the lubricant of the tire, so regularly download the oil to the butter in the nasal sprocket.

Intensive work on the tire sawing causes the need for a regular sharpening of the saw chains. Sharpening on average, it is customary to do every one and a half - two hours, depending on the density of the sawn wood. For sharpening the saw chain you need to use a sharpening machine that is easily adjusted to any step of the saw and the sharpening angle. To prevent stopping the sawing process, it is always recommended to have a margin of spare chains.

Production of tire sawmill

Tire sawmills made with their own hands will become a reliable assistant in the subsidiary farm. The bed is made from 2 steel channels, which have a length of 8 and a height of 0.14 meters. In addition, metal corners or rails are used. Billets are needed that have an ideal direct form. The length of the channels do the holes with a diameter of close 14-16 millimeters at a distance of approximately 1.5 meters, which can be seen on the drawings of tire pyllars.

In accordance with the number of holes, it is necessary to make special ties made of pipe segments for water supply. Details must be fixed using bolts or threaded spills. The components of the sawmills are pre-prepared, you need to collect together and install on the racks. The number of racks depends on the length. The extreme racks are located at a distance of one meter from the end of the guides.

To give the structure of rigidity, the disclosure should be rationally. Then install the movable cart, which is to be installed from a steel plate, 4-6 millimeters thick, and a length of 0.6 meters, depending on the size of the electric motor. For the trolley, pick up the clamping plates and gaskets.

The elements are responsible for ensuring the free movement of the mechanism, as shown on the video about homemade tire saws. At the same time, an extremely minimum clearance is required. The string of gaskets is performed using bolts. Eliminate the transverse backlash, attaching a storing corner to the trolley. The trolley can be installed on the rollers or bearings.

An aluminum profile with two streams is posted on the electric motor shaft. Effort from motor through two belt is transmitted to the pulley, which is located on the cutting bracket. Pulleys that the outer edge has a diameter of 80 millimeters, you can take from the motoblock. The slave pulley force transmits through the roller rotating on the two-shirts, on an asterisk, and then on the saw chain.

The chain is used to move the trolley with a saw and a motor. The circuit on the tire sawing should be well stretched, as in the photo of the self-made tire sheds. Tension of belts and chains can be done manually, fixing two bolts with nuts. You can additionally put a tension bolt on the chain tensioner, but the forceps of the forceps are enough for the chain to be well stretched. It is recommended to facilitate the operation of the chain to lubricate it with constantly machine oil.

The steering wheel is mounted on one of the strokes of stars, which are located along the edges of the guides. After that, you can make the manufacture of a locking device for a log: mobile rods are inserted into the pipe with a diameter of 3-4 centimeters, which in the stopper included at the necessary height of the M8 screw. Fixed on top of the rods pressing parts that have a length of at least 1.5 centimeters and cam clamps.

The use of self-made pailoram

After they made homemade tire sawmills, you can begin to install it. Piloram is installed on guide rails with the help of four supporting rollers. Rollers can be removed from the tensioners of the same motoblock. Remember that the tire and chain should be special for longitudinal sawing. The chain will be sharper, the easier it is to cut a tree. On the day you will have to change from 2 to 4 chains. On the photo of tires, the chains and tires can be viewed.

You can install a vertical screw to set the thickness of the boiled boards in which the frame moves with a saw unit when rotating. Size For a start, exhibit by a ruler, and when you become an experienced frame, you get to install the thickness of the screw turnover.

At the beginning of work, fasten the log according to the drawings of the tire panel with your own hands, open the crane on the tank on the tank, run the electric motor, lower the frame with the screw and you can begin the movement of the bus panel. The effort with which on the rails will move the sawmate, small. This indicator depends on the thickness of the log, the breed and suchchatness of the tree, the state of wood - dry or fresh, as well as on the level of chain sketching.

A pailorama made with their own hands is capable of sawing any wood, but it is advisable to use freshly prepared, and not dried, as they say, bented. Fill the lighter coniferous logs, soft deciduous breeds - alder, maple, poplar, aspen, harder - ash, elm, oak. It is harder to work with a stare acacia, because this breed has very dense and solid wood.

The homemade sawmaker can cut the log, the maximum length of which is 7 meters, and the maximum diameter is 40 centimeters. The speed of sawmilling the wood material can be characterized as it is a three-meter board of a pine blank, which has a diameter of 25 centimeters, dilated in 7 minutes.

Thus, you learned how to make a tire sawmill. Tire sawmills are distinguished by high-quality sawmaking wood, accuracy, compactness, low price of tire panel, ease of design, reliability, low weight, ergonomic during operation, ease of transportation, durability and safety. If you have a big construction, then it's time to think about the manufacture of a tire machine, which is designed for longitudinal log processing.