Ideas for the kitchen with your own hands. Accessories for bar racks in the kitchen - varieties and features of accessories on what glaces are hanging on the bar

Step 1: Cardboard model

To the stand is beautiful, you need to make a cardboard model in order to make sure that all sizes are removed correctly. To do this, you need to put a bottle of wine on the table and distribute wine glasses evenly around it, after which we measure the distance between two adjacent glasses as shown in the figure. This is usually the length and width of the rack. Round it to get a little more free space.
Cut the piece of cardboard in size. In this case, it is 18x18 cm and draw lines between two groups in opposite angles to find the center. In order to make a circle in the center, you can use a glass.
After that, we measure the width of the leg legs in its narrow place. We draw lines in every corner of the cardboard a little wide legs so that it goes. If the glass is 11 mm, make a width of 13 mm. Connect lines in opposite corners to get the letter H.
At the distance from the center, which is equal to the radius of the bottle and the radius of the glass of glass slightly more, (on average 35 mm for a bottle and 30 mm for glass, + 3 mm on the reserve, it turned out 78 mm) we draw 4 circles. The diameter of the circles should be slightly larger than the width of X, which was previously painted. You can make circles circle or bonding solon. These 4 circles will hold the glasses from slipping.
Cut the cardboard on the marking and encircle. If it happens not exactly exactly, make another model for adjustment.

Step 2: We make a wooden stand

As soon as the cardboard model turned out (approached in size), it is possible to present to a wooden board. Dimensions and labeling redraw from cardboard.
First, drill a hole in the center and 4 circles, with a drill and drill, as shown in the photo, as they will be difficult to do smooth if you start with cutting lines.
After the holes, drink everything else, namely the tracks for glasses.

Step 3: Spin

To smooth all the angles, use sandpaper. To smooth holes from the inside wrap the pencil into it, it will be easier to get to hard-to-reach places. If you want to give such a stand for glasses to someone, you can paint it and cover with varnish to create a more presentable view.
There are many options for such supports that can be performed in the form of a circle, an octagon and even make extra holes for the corkscrew, and other items. Good luck!

There are no rare on modern cuisine. With it, you can beautifully distinguish a large space or competently use a small area. The elegance of this furniture is manifested in detail, in particular, it is important to choose a hanging holder for glasses. Various accessories for bar racks It must be beautiful, functional and easy to clean. It is for these criteria that the fruit, a basket or shelf is chosen.

Variety in choosing

Bar Rack Accessories The kitchen is necessarily selected based on several criteria. They should be simultaneously comfortable, reliable, easy to care and organically fit into the already existing kitchen interior. All accessories for bar racks should form a single complex. That is why it is important that the details are well combined with each other.

An important point when choosing a particular material becomes. In essence, the most often occurs metal and glass. Depending on which the tube for the bar rack is acquired, all other little things are selected. Among metal suspensions for glasses, silver, bronze tint or brass occurs. Glass gives more space for fantasy. A suspended holder is performed from a transparent or matte material, it can also be patterns.

Barbell It implies one type of fastening. However, the heavers for glasses themselves can be round, semi-circles or only to occupy a small part of the circle. The design meets minimalism, when it is just a small metal arc, or the decorated version capable of paying attention to.

Among accessories are also found universal shelves, fruit baskets, as well as special bottles and hooks for mugs and cutlery. Their competent location and use will allow you to decorate the kitchen and make the pastime comfortable.

Features of use

Fastening the bar stand on the wall or ceiling, as well as to the rest of the furniture is easy. This is the same part of the prefabricated design, like any wardrobe. With the help of screws, parts are easily fixed. Regarding baskets, stands and other fittings, different options can be considered here. Sometimes the shelves are in a static state, but most choose models that can spin around their axis. So much easier to get glasses.

There are several rules for the choice and use of baskets, glass holders, or other fittings, which completes any bar rack:

It is necessary to choose the right fastening of the pole: must be as reliable as possible.
The entire furniture ensemble must be performed in a single style.
Every version of the stand is open, so the glasses and the shelf itself are recommended to regularly wipe from dust.
In the case of the ceiling fastening of the pylon on the top of the top, it is necessary to place the bottles or other items used too often.

Fasten fruit or accessories - half of the task. Of course, it is important to think about what glasses will stand, as the composition will look more profitable. The second time the competent alignment of objects becomes. Bar rack provides that bottles, glasses, fruit will be constantly on it. With a rack, there is a locker, it can be located all things that should be at hand. It is immediately important to hang gorgeous dishes and pick up the most beautiful fruits. Fools will look great, oranges and apples. The first to add grace, and the second will be able to become a bright attractive accent.

Original solutions

Ideally looks the thematic bar counter. For its design, first of all, it is necessary to understand how this design will be applied. Solutions are several:

Place for breakfast and tea drinking.
Part of the decoration of the party.
Working surface.
Detail of the zoning room.

Two latter options do not provide a large journey of fittings, so it is better to stop at 1-2 shelves. For breakfasts, it is necessary to place mugs, fruit, a basket for sweets, and hooks for devices should not be prevented. Stand for parties looks clearing all. Here you definitely have all the listed holders, and the stand is added to the bottle, glasses. Sometimes they can be attached not to the pylon, but to the upper suspension design, located under the ceiling.

The main thing is in the details

The room design is manifested in detail. A competently thoughtful bar stand can create a kitchen that will be proud of the owners. All in it will be at hand. This will make it prepare without difficulties, but for the holiday to make the room special and unique.

Do not forget that, regardless of the rules, everyone can make something. For example, along the entire length of the pilon, you can mount round supports, fruit baskets, it will be worthwhile to hooks and a simple shelf for glasses.

Dremel offers to make a universal hanging wine storage cabinet.

What will take:

- Wooden rails;
- 1 wooden bar;
- multifunctional tool (here Dremel 4000);
- grinding nozzle (430) 6.4 mm, grain 60;
- cutting disc for wood (SC544);
- universal bur (561);
- Universal cutting kit (565);
- adhesive gun (here Dremel (930));
- screwdriver;
- screws;
- Dowels;
- self-tapping screws;
- metal chain.

Step 1

To make composite shelf parts, saw the wooden bar into several pieces. The rear and front walls of the shelves must match the proportions of 50 × 2 cm, and the side - 25 × 2 cm. To do this, use the Dremel 4000 multifunctional tool with a cutting disk for wood (SC544). Collect the edges of the blanks using Dremel 4000 and the sanding nozzle Dremel (430), 6.4 mm, grain 60.

Step 2.

Take wooden slats and saw them on 12 smooth parts (for each bottle you will need 2 stands). Each billet should not be shorter than 22 cm long. To make such supports, use the Dremel 4000 with a cutting disk for wood (SC544).

Step 3.

Take the front and rear parts of the billets for the wine shelf and mark on them where the rails will be located. Pass the pencils along the entire length of the front part of the shelves - they will need to cut the cuts for bottles. In order to place the bottles in the shelf it was more convenient, cut off the semicircles in which the container should be placed. To cope with this task, use Dremel 4000 and a universal cutting kit (565). Collect the edges of the semicircles using the Dremel 4000 multifunctional tool with a 6.4 mm grinding nozzle, grain 60 (430).

Step 4.

Secure the rails at the outlined points using the Dremel adhesive gun (930). To complete the work on the shelf, it remains only to skate all parts of it with screws. Do openings in the components of the shelves and install metal corner brackets in them. Then screw 25-millimeter screws and tighten them with a screwdriver. In order for the wine regiment to become even more convenient, you can install a grid on it for hanging glasses. To do this, it will be necessary only to screw the metal grid with a screwdriver on the reverse side of the shelf.

Step 5.

In the corners of the front side of the wine shelf, screw the self-tapping screws. Attach the metal chain to them - it will be possible to put the shelf with it in any place in the kitchen.

Step 6.

Now only it remains to choose a good place to hang up the cradles. To secure the locker for wine, measure the distance between self-tapping screws. In accordance with it, do four holes in the ceiling using the Dremel 4000 and the universal boraner (561), and then insert the dowel and screw four more additional self-tapping screws. Hang the shelf.

Bar table, if it is in the kitchen, according to statistics, even more often than the dining table is operated. By purchasing a bar rack in advance, think about what accessories will you need, do you need a mounted bar system, central and side shelves, or will it be enough to hang a small locker?

Pros and Cows Bar Rack Equipment

Accessories for the bar counter in the kitchen have their advantages and cons.

Pros:

this is a great solution if there is not enough places for storing things;
central and side shelves are very convenient and functional to use.

Minuses:

the need to regularly wipe the bottles, glasses, devices;
a large number of accessories overloads space, especially cautiously with the filling of the rack you need to be owners.

Types and types of picking bar racks

Accessories and fittings are different by the method of fastening, form, materials and destination.

By the method of fastening, you can allocate:

Central shelves for bar racks that are attached to the pipe in the center;

Side or swivel shelves that are attached to the pipe to the handle nominated towards;

Suspended systems that are attached not to the bar counter and the pipe, but to the ceiling.

In the form of central and lateral shelves are cone-shaped or round.

For destination and functions, bar accessories are divided into:

Holders for glasses;
Bottle holders;
Universal - for storage of things, dishes, food and serving;
Hangers for instruments, mugs, napkins, etc.

Accessories and accessories are most often made of metal or a combination of metal with glass. But in color can be the following metal variations: gold, bronze, copper, chrome glossy and matte.

The color of accessories and furniture accessories must correspond to the color of the kitchen headset furniture. Read more about the combination of colors in the kitchen interior, read.

What is necessary furniture fittings for creating a multi-level structure from shelves?

First of all, a pipe that performs the function of the foot and the base-fasteners for the shelves is necessary. It is made of brass or nickel and most often there is a diameter of 50 mm. Pipe (or barbell) is fixed to the cord holder to the floor, lateral fasteners to the wall and / or to the ceiling mounting ceilings. For tabletop bar rack is also fastened with a special flange.

How to choose a complete set

Let's deal with what it will really be necessary, and from what it is better to refuse to not clutter the space.

Select accessories for a bar counter, it is necessary based on its destination. In what capacity is it most often used: as a home bar for parties and holidays, like a breakfast table and snacks, an additional surface for cooking, work at a computer or simply as an accessory that shares?

If the bar is a bar for you, first of all, a resting place with friends, then you put it with a multi-level composition of: Holders for glasses, central shelves for bottles, side shelves for serving and storage. If the kitchen and the strut itself are large, and you want to create an atmosphere of a real bar, then install the attachment system.

It is permissible to use more than three shelves if your bar stand is exactly a bar, and not a table for breakfast.

If you often prepare or want to use it for storing kitchenware, then you will be useful to: triple hook hangers, for which you can hang cooks, side shelf for serving, a universal central shelf for storage of things (better with high sidelights) and with Desire Holder of glasses / bottles. But, if in the house children, then from this idea, of course, it is better to refuse.

In other cases, it will be enough to lead to the railing with hooks for instruments, baskets for, plants. And you can try simply a small cabinet or shelf for storing glasses, drinks, dishes and other items that you most often need for breakfast or while working at the computer. From the central and suspended shelves, if they do not have acute necessity and your kitchen is not fulfilled, it is better to refuse.

For someone, the stands under the glasses are becoming a collectibles. Someone does not understand at all, why are they needed. But look at yourself: the table is protected from temperature damage, scratches and round divorces after beer mugs; Guests are satisfied with an interesting stylish thing under its glass; You have a mood to use the product of your own creativity. And this is an excellent gift! It seems enough reasons to make the support set, right?

We have collected the most original and interesting examples for you. In many of them, cork material is used as the basis, which is easy to find in building stores and shops for creativity. From it most often make stands, so you can buy ordinary and improve them. We give links to some master classes, but many are so simple that you yourself guess how it is done.

From wine traffic

Classic coasters for drinks and hotter, as we have already mentioned, made from cork material. But wine stoppers are not different in properties, but they look much more interesting. For a large stand, the idea will fill the frame with vertically standing plugs. For smaller stands, it is better to cut the plugs on thin mugs or in half and glue horizontally to prepare the basis.

From wine traffic jams you can do many other things, we wrote about it in the post.

From the details of board games

From fabric

To make the coasters from the felt, do not necessarily be able to sew well. Just take the base for the stand (the best cork, but you can also cardboard) and cover with a fetter with small stitches. If you connect fantasy, such cute citrus slices may turn out:

You can use another fabric, even lace. Such supports look particularly elegantly, and it is easier to make them simple: a piece of lace tissue to glue a cork-based basis with the help of PVA and it is also lubricated it from above. When dried, cropping extra edges. Vua-la!

From ceramic tile

Square tile - another wonderful stand material. On this basis, original Polaroid Stands are made on this basis. The effect is achieved due to the fact that a photo is glued onto white tiles in compliance with proportions.

Instead, a photo can be glued to your favorite text on the tile.

From paper

"The paper is too soft for this" - you might think. And it is true. But only if you do not twist the durable strips from it. For example, the old magazine can be put into dealing for such supports:

Photos: modernVintageEvents.com,kittenhood.ro, OneArtsymama.com, SimplyDarrling.com, Purlbee.com, Modpodgerocksblog.com, AbeautifulMess.com