Electric boilers Protherm: device and features of operation. Overview of Protherm Electric Boilers Electric Wall Copper Protherm

Electric boiler Proterm Skat for heating is the most common model in Russia among all manufacturers presented in the domestic market. Good quality of the European assembly and reliability of components, many positive feedback on Protherm electrocotels and reasonable prices contributed to their popularity among buyers, both in Russia and abroad.

To understand the advantages and disadvantages of Slovak heating equipment, it is necessary to disassemble the technical characteristics and a device of wall-mounted electric boilers with a spear of a series of skate, the model range, presented on the market, and features of the connection. Consider also problems and malfunctions that may occur during the operation of the machine, errors and methods of their elimination.

Model range of electric boilers Proterm Skat, type K (Kr)

To date, the Slovak company "Protherm" is represented in the Russian market not only by their boilers, but also by eight models of electrocotes of the type of skate k (kr), characterized by power consumed and connected to the electrical network. Country producer water heaters - Slovakia.

The company produces only one-connecting devices that can drop a private house with a total area of \u200b\u200b30 to 280 m2. Among them are distinguished as single-phase - with the possibility of connecting to the power grid 220 V and three-phase - 380 volts.

Electric boiler protema: photo

The main differences between the electrocotes of this model range is their rated power, which can be 6 or 9 kW, 12, 14 or 18 kW, 24 and 28 kW. Depending on the selected model, these are aggregates:

- low power: scat 6K and 9k;
- average power: Skat 12K, 14K and 18K;
- high power: scat 21k, 24k and 28k.

Managing the work of the electric unit "Proterem" is carried out using special buttons made in the form of multidirectional arrows, on the front panel of the heating machine.

They can set the necessary water temperature in the heating system, as well as in the remote boiler of indirect heating, which is bought, if necessary, obtaining hot water for economic needs. In addition, the button " Mode / OK.»You can enable (set up) the desired mode of operation of the electrocotel:

- Traditional mode for heating (25-85 ° C);
- mode "Warm floor" (30-45 ° C);
- The preparation of hot water in an indirect heating boiler (35-70 ° C).

The multifunctional LCD display informs about the temperature in the heating circuit and the boiler, as well as problems and errors in the boiler in the event of any malfunctions. Above the display, light bulbs are located depending on the specified mode of operation of the device, changes in power consumed and insufficient water pressure in the system.

Default, all Protherm electric boilers are 3-phase, however, small power models 6 and 9 kW ("Skat 6K" and "Skat 9K") can be connected to a single-phase network of 220 V. Main power devices, calculated for heating Houses up to 180 m2, and high-power boilers - more than 20 kW can be installed in private homes or other rooms with a total area of \u200b\u200bup to 280-300 m2. We look at the table.

Proterm Skat: cable cross section, energy consumption

Features of the device of the electric boiler rubbed

The heating apparatus consists of several main elements necessary for its full operation.

1. Copper heat exchanger of a cylindrical form for heating the coolant.
2. Block tens-s from copper of different power and quantity with multi-step switching.
3. An expansion tank of 7 liters to compensate for thermal expansion in the heating system.
4. Hydraulic group consisting of:

- three-speed circulation pump;
- Safety valve for 3 bars;
- Automatic air vent.

In addition, the NTS temperature sensor is installed on the heating circuit line, as well as an emergency sensor that protects the unit from overheating. There is a system for the protection of the device from freezing. and from blocking the circulation pump.

Electric lamps are mounted in the heat exchanger of the boiler with a rubber, top and bottom. Depending on the model, the amount of Tan can be different. For example, in the apparatus of Skat 6K, 9k, 12k and 14k, two Blocks of the Tannes are installed, in the scat 18K and 21k - three tan, in 24k and 28k - four. For each model, the blocks of TEN-Es have different power.

I suggest detail to disassemble the internal device of the hinged electric boiler "Proterm Skat" according to the manual scheme:

Internal device "Protherm Skat" according to the instructions

1 - heating unit;
2 - a crane for air reset;
3 - heat exchanger;
4 - pressure sensor;
5 - Safety valve;
6 - adjustment of the circulation pump;
7 - LED state of the pump;
8 - grounding on the "return";
9 - grounding on the body of the water heater;
10 - pump for circulation;
11 - Connecting an electrical circuit;
12 - contactor;
13 - e-board;
14 - the temperature sensor NTS;
15 - emergency temperature sensor-limiter.

Electrocotel connection: Water circuit, cable

Connecting electric boiler Protherm

1. Like most modern, wall heating machines, all connectors for connecting the boiler are at the bottom of the housing. This is done to save space in the room in which the electrocotel is installed.

2. The heating water circuit is connected using two threaded fittings with a diameter of 3/4 ". On the left there is a reverse line (the inlet of the coolant into the boiler), on the right - direct (output).

3. Nearby are: overflow for safety valve, drain valve, as well as connectors for connecting an electrical cable of different sections. It is possible to monitor the pressure in the heating system according to the testimony of the pressure gauge, which is also located at the bottom of the body of the apparatus.

Electric concurrents protema scat: specifications, sizes

Water boilers have a rather compact dimension of 410 x 740 x 310 mm, which allows them to harmoniously fit into the interior even a very small kitchen or boiler room. The remaining technical specifications are looking at the table.

TECHNICAL CHARACTERISTICS OF ELECTRICOTES WATER

Errors and faults of the electric boiler Protere: Methods for troubleshooting

1. Error code F00, F10, F13, F19.

These codes tell us about the NTS temperature sensor fault. It may be necessary to replace it or replace the electronic board. But first check the cable connections on the performance.

2. F20 error.

Faulty temperature sensor or thermal fuse faulty. Try to turn them in turn. If the boiler turns off again, replace the faulty item.

3. Error F22.

This error testifies to the "dry" start of the electric motor. Add water pressure in the system, it must be at least 0.6 bar. The presence of air in pipes and radiators of heating is possible.

4. Error code F41 and F55. The relay or contactor has occurred. Check these parts for defects.

5. F63 error. No connection with EEPROM. Reset settings to factory.

6. Errors F73 and F74.

Errors under these codes sign about problems with water pressure sensor. You need to check the contacts or replace the sensor itself.

7. F85 and F86 errors. Freezing of water in the electrocotel itself (F85) or in an indirect heating boiler (F86).

Electrical circuit Connecting boilers Proterm Skat

Electroscheme Connecting boiler Proterm Skat 6, 9, 12, 14K

Benefits of electric boilers:

- quality assembly and reliability in operation;
- a wide range of different power;
- modern security system;
- high efficiency of 99.5%;
- the ability to connect additional options and equipment;
- Good customer and specialists' reviews.

Disadvantages of electro-block brand ruby:

- lack of room in the configuration of the device;
- no models with a built-in boiler for heating the waterproof water;
- It is not allowed to use non-freezing fluid as a coolant;
- Price from 35,000 rubles.

We examined in detail electric boilers Proterm Skat for heating, all model range and specifications. During the instruction manual, the internal device, revealed the main advantages and disadvantages of these devices. And also stopped their attention on possible errors in the event of faults and some ways to eliminate them with their own hands. We watch the video.

In those houses where to use gas as a source of energy for the heating system is impossible, electricity can be replaced in the heating system. It is on it an electric boiler heating with a ruber. Thanks to some of its peculiarities, such equipment becomes more and more popular every year.

Benefits of electric boilers

Protherm electric boilers profitably acquire thanks to the following parameters:

• low cost;
• easy in installation, operation, quite high reliability;
• compact sizes, thanks to which the electric flow boiler is quite possible to hang on the wall in almost any room of your house;
• increased safety (no open flame, there is no need for a separate boiler room, no chimney);
• practically complete silentness when working;
• work in automatic mode (without human intervention) for a long time;
• ecology. After all, the protherm electric does not throw in the air of harmful substances and does not create extraneous smells.

At the same time, however, there are some drawbacks:

• proTherm electric boilers are not as economical, such as the same gas;
• they are not so powerful as boilers operating on gas;
• sometimes so many electricity consumes that the power grid in some areas may not withstand such a load. Of course, with the use of electricity, not only one boilers work, but the rest of the equipment is much less loading the network.

Characteristics of boilers

The line of boilers of electrical protema, which are presented in our directory, has the following characteristics:

• the possibility of supplying hot water (all models with a rubber skat);
• power from 13 to 28 kW (therefore, it is possible to dash with their help with an area of \u200b\u200bup to 280 square meters. m);

PROTHERM electric boilers are convenient and effective solutions for the heating of residential premises. If you need a profitable alternative to gas heating, they will be the right choice.

The company "Proterm" leads its history since 1991, when Prague was released in the capital (then Czechoslovakia) Prague, the first electric boilers "Protherm" were released. Since then, for more than 20 years of history, this Slovak company has established the sale of its products in 25 countries on three continents, exporting more than 90% of its heating equipment.

Consumer feedback indicates that the European quality of the "Protherm" boilers and their low cost has won trust all over the world. Currently, the company produces more than 95 models of heating equipment.

Technical Features of the Company's products

Compared to gas heating, the Protherm electric boilers have a number of competitive advantages, among which are very high efficiency, silent, simplicity of installation and the ability to accurately configure. Electric boiler "Protherm" has small dimensions, an attractive appearance and a convenient control panel. Unlike external combustion boilers, the electric shock does not need a wiring of chimney and can be installed anywhere.

If you decide to buy the electric boiler "Protherm", the company "TELLOATIC" will help you choose a model that will satisfy all your requirements. In our assortment there are electric boilers with a capacity of 6 to 28 kW, capable of damping the rooms with an area of \u200b\u200bup to 280 m2. Depending on the power, the models are powered or only from the network of 380 V, or to choose from 220/380 V.

Elektrootals of the SCAT speech series are ideal for use in private houses, apartments and industrial buildings. Method of fastening - wall. Designed to heat the water in the tank and the heating of the premises. Boilers are purchased separately. Execution material - enameled steel, which provides efficient heat insulation. It is installed in a pair with Protherm heating boilers. As a result, the time for heating is significantly reduced, you can independently adjust the cost of heating and consumption of hot water.

The technical characteristics of the electrocotel allow you to completely turn off the house heating, which is relevant in the summer or during seasonal accommodation in a country private house. For comprehensive work it is possible to install a room regulator that allows you to control the room temperature, including and turning off the boiler if necessary.

Functional features

Electric boilers Skat are produced in eight modifications depending on the power that can be from 6 to 28 kW. Can act as an alternative to gas heating.

1. There is protection against sharp electricity jumps, thermal fuse.

2. Four power levels.

3. Operating temperature at maximum power - 85 ° C.

4. It is possible to connect the boilers with a cascade way.

5. Protection against freezing and overheating.

6. The pump is protected.

7. LED indicator, touch screen control.

Advantages of electric shut flocks with a proterm:

• The efficiency is 99.5% during the entire service life;
• adjustment light and accurate;
• ease of installation and maintenance that do not require special skills and skills;
• environmental friendliness;
• work silently;
• there is no need to connect to the chimney or gas pipeline.

The electric boiler is running from a network of 380 W. Models are issued and with the possibility of connecting to less powerful networks. 6k and 9k can feed from 220 W.

Short review

Skat series is represented by the following models:

1. 6K. Power is 6 kW. Designed for the heating of premises with an area of \u200b\u200bno more than 60 square meters. m. Works from the network 380, 220 kW. The volume of the expansion tank is 7 liters. 1 minute is able to prepare 13 liters of hot water.

2. 9k. The maximum area is 90 sq. M. m. You can connect to the power grid 380 or 220 kW. Decader expansion tank. Number of levels - 4.

3. 12k. Maximum power - 12 kW. The area of \u200b\u200bheated room is 120 square meters. m. Functions from the network of 380 kW. Built-in tank with a capacity of 10 liters. Work at the minimum level is the first 100 seconds.

4. 14k. Electrocotel (14 kW) is able to ensure the heating of a small house with an area not exceeding 140 kV. m. It is possible to adjust: 1/3, 2/3 or full power. The unit is equipped with a steel heat exchanger with root elements.

5. 18k. Heats a room with a size of 180 square meters. m. The temperature of the cooked water can vary from 40º to 85º. It has three heating elements. The number of steps is four.

6. 21K. Electrocotel (21 kW) is used for heating of residential or warehouse rooms, the area of \u200b\u200babout 210 square meters. m. Methods of exploitation: as the main heating element, in the system of warm floors, water preparation for economic needs. Equipped with three tanks.

7. 24k. Powerful electrocotel 24 kW. It has four modes. A stepped start of working with exposure, which ensures safety when the power supply is in power supply. The number of heaters - 4 (included in alternately).

8. 28k. The most powerful proterm electric shock (28 kW). It can be used both for the heating of private houses and for industrial buildings. It has four Tan 7kW. Adjustment occurs smoothly, which contributes to the uniform distribution of the voltage. Maximum water heats up to 80ºС.

Opinions of users

"Last September was planned to move to a country house. Immediately the question arose about heating. Gas seemed inappropriate to us, since it is necessary for a separate room for certain requirements, and the installation of equipment is not easy. The opinion was united, so we decided to buy electric protherm with a boiler for water heating. For the heating of a private house, it is perfect, made sure of their own experience. Easy to manage, even our grandmother coped with him. Minus - increased electricity costs. "

Bocharova Irina, Yekaterinburg.

"We live in a private house, it is impossible to carry out gas for a number of reasons. Managers advised us to acquire the electric boiler Protherm Skat 9. As a result, he did not regret his choice. It is possible to adjust the heating, even in large frosts of the house is very warm. If you turn on the full power, then literally in a few minutes of batteries are hot throughout the house. But in order to save it, it is better to choose the minimum mode. "

Ivanhenko Nikolai, Ufa.

"Having studied reviews and opinions, I decided to buy an electric shock for the heating of the house of the company by Proterm. I have a skate 9 model. It warms almost 700 meters of heating floor pipes. I had to install an additional pump, since the staff of such volumes does not withstand. Power put 100 square meters. m. Square five kilowatt. This is quite enough, even in winter. "

Dubenko Sergey, Moscow.

"Building a cottage, we were puzzled by the issue of heating. Reviews of our friends helped choose an electric boiler, the choice fell on the protherm. Places takes a little, it looks modern, the cost is quite affordable. On warranty service, two years, we use the year and there are no complaints. Installation is not so simple. I recommend installing independently, but to entrust the specialists. "

Zimina Alena, Kazan.

"I bought a protherm skate several months ago. The price and quality are suitable, except for one "but". There was a small problem. The pressure was non-permanent: first rose to 1.9, then sharply falling to 1.1. Specialists from the service center have rescued. Pumping the compensator with lowered water. There were no more problems. "

Kolesnikov Mikhail, St. Petersburg.

Pros and cons

One of the main advantages is the safety of operation, which is provided:

• voltage drop control system;
• a protective thermostat that turns off the operation when water heating above 90º;
• stepped way to turn on the boiler (step up to 7 kW).

The steel case guarantees reliable heat conservation and durability. Comfort use is possible due to the display, which displays: temperature, mode, errors (with their codes are familiarized in the instructions). No need for systematic service. Electric concrete skat functions silently. Regulated heat level, affordable price.

Disadvantages:

• the stable operation of the power grid is necessary, otherwise there is no alternative to heating;
• connection through the stabilizer is recommended;
• high energy consumption in the cold season.

Rates

Model Proterm Skat.	power, kWt	Price, ruble
6k.	6	33500
9k.	9	34500
12k.	12	35000
14k.	14	36600
18k.	18	39100
21K.	21	40200
24k.	24	41200
28k.	28	42200

The price of an electrocotator in a flow for heating partially depends on the situation in the foreign exchange market, since the products of this manufacturer are manufactured in Slovakia.

Wall-mounted electric boilers PROTHERM

Heating electric boiler Protherm is distinguished by the following technical features:

• three-phase power control system;
• the ability to control the external boiler using the boiler control panel;
• economical circulation pump;
• easy connection room thermostat and so on.

The price of the Protherm Electric Boiler on the website of the official representative is distinguished by the lack of charges from trading intermediaries. This technique belongs to the equipment of high comfort, which is capable of working in 220 V electrical networks in or 380 V. All boilers are fully automated, therefore it practically does not require human participation. It is also worth noting the cost-effective work and the silentness of this product.

Electric mothers Protherm

Descriptions, photos, reviews and price of Protherm Electric boilers for the heating of a private house are available on the catalog pages. To obtain consultation and familiarization with additional information regarding the technical characteristics of a particular model, delivery conditions or payment methods, order a call back or ask a question online.

If you have decided on the model and decided to place an order, you will only have one click to open the form of feedback and purchase. To purchase the Protherm's heating electric boiler in St. Petersburg and Moscow, also contact the company's retail network, addresses and phones that can be found on the site.