Homemade adaptations for the grinder. How to make a rack for a grinder with your own hands in different ways? Fasten the grinder for accurate cutting

Without an angular grinding machine - Bulgarian - can not do in the garage or in a private house. The unit allows you to cut a metal profile, clean the weld or remove rust from the surface of the blanks and parts, has a low price and incredible convenience when working. There are grinders and disadvantages, one of which is an unstable quality of the cut and the danger of a distinguished disk skew when used. You can eliminate annoying shortcomings by making a special box with your own hands, which will turn the hand tool into the real cutting machine. This will increase the speed of work and achieve accuracy that can be obtained only on the equipment of industrial manufacture.

Scope of cutting machines

Cutting disk machines are widely used in metalworking, mechanical engineering, in the woodworking and furniture industries. The aggregates found their use in the household: they are used as a convenient tool for performing various works in the workshop and garage. The cutting machine is convenient to use to solve a number of tasks:

The advantages of disk cutting machines include convenience and simplicity to use, high speed and accuracy of the cut, the ability to replace the cutting disk during minutes.

Due to the relatively low cost, universal aggregates have a quick self-sufficiency, so they are beneficial to use in small industries and in small shops.

In the household, the cutting machine is used irregularly, so the purchase of tool is irrational. It is better to easily make a special bed for an angular grinding. This will increase the universality of the Bulgarian, turning it into a small-sized cutting machine.

Types of devices, their advantages and disadvantages

There are two types of constructions of cutting machines that differ in the arrangement of the Bulgarians, which can be made it at home.

The first installation is a bird with a rigidly fixed corner grinding machine. On the working surface only the cutting disc is visible, which is fluent in the roset of the table. Cutting a metal profile or sheet in this case is completely identical to the cutting of wooden blanks with a circular saw. Despite the very simple design, this scheme does not use particularly popular. Those who have manufactured such a fixture note the inconvenience to use due to the need to move the workpiece. This significantly reduces the accuracy of work and makes the process unsafe. The only advantage of the machine with the lower arrangement of the USM is the ability to quickly paint thin metal sheets.

The cutting machine with the lower arrangement of the Bulgarian can be used both for cutting metal and as a circular saw

The second scheme at which the part remains fixed, and the cutting wheel itself moves, is more convenient. The so-called pendulum saw placed on the table top allows you to cut off the workpiece exactly at the desired angle, while the possibility of making the desired number of the same type of parts appears. Due to the location of the grinders from above, the cutting blanks does not require effort, and the operation of the unit becomes simple and safe. The undoubted advantages of the design also includes the possibility of quick dismantling of the grinder for traditional use. As for the disadvantages of this method, a hinged compound can be considered a weak link, which complicates the design of the machine.

The metal cutting machine with the top arrangement of the Bulgarian has a more comfortable design and makes it possible to cut the blanks at the desired angle

The device of the pendulum saw from the Bulgarian

The pendulum saw from the Bulgarian is available for assembling at home, does not require expensive materials and special qualifications. The cutting machine has a simple design and consists of several nodes:

• stanina;
• pendulum;
• fastening under the ushm.

The bed is a steel frame welded from profile pipes, with a sheet metal platform with a thickness of at least 3 mm. The bracket is mounted on this plate, on which the pendulum joint hinge, as well as the stop for the retention of the workpiece. By the way, such stops may be several: conveniently, when one element allows you to make a perpendicular incision, and the other allows you to cut the material under the necessary angle. The most advanced focus is a turning device with a transporter, with which there is any angle between the part and the cutting disc. An important detail: in the touch of a saw to the platform in the table top, it is performed by propyl, its width should be equal to the double thickness of the cutting circle, and the length is to fit the diameter.

Standard construction consists of a bed, pendulum and fastenings for the grinder

The pendulum of the cutting machine is a T-shaped part of rectangular metal products. On the one hand, this node is fastened with a moving connection to the front bracket, and on the other hand, the mount under the grinder is attached. Mobility of the pendulum saw blades provide rolling or sleeve bearings, and return the tool to its original position is a flexible element (rubber harness or spring).

Bulgarian fastening is a console with one or two brackets connected with the pendulum. To one of them, the ESM is attached by bolts. To do this, threaded holes for attaching the handle are provided in the casing of its gearbox. The second bracket is an ordinary clamp (stepladder), which holds the cutting tool for the body.

Convenience during the operation of the equipment can be significantly increased by connecting the grinder to the foot switch-pedal. Of course, in this case, the RUB lever will lead to the working position and fix the special button.

Required tools and materials

Getting Started to make a cutting machine, it should be understood that the accuracy of his work is directly related to the stability of the structure. Therefore, the choice of material of a certain thickness is dictated not so much with the requirements for the strength of the hull, as the need for its rigidity.

Before proceeding with work, you need to cook:

• pipe profile "Square" (25x25x2.5 mm);
• pipe Profile "Rectangle" (40x20x2.5 mm);
• sheet metal thick 4-5 mm;
• bearings of balls No. 202, 203 or 204 - 2 pcs.;
• the rod is calibrated with a thickness, which is equal to the diameter of the opening of the inner bearing (up to 100 mm);
• rod with a diameter of 8-10 mm;
• metal tire (20x4 mm);
• bolts and nuts with thread M8 or M.

From the tools you will need:

• angle Grinder;
• drill or drilling machine, roller set;
• a set of dies for cutting the metric thread;
• horn keys;
• welding machine.

The presence of electrical welding is desirable, but optionally - all connections can be performed on threaded connections. However, it should be understood that this method reduces the reliability and strength of the structure.

For the manufacture of the machine it is better to choose the grinder of the famous manufacturer

The main assembly of the cutting machine is the angular grinder. It is not recommended to use the "small" grinder, designed for cutting discs with a diameter of up to 125 mm with a capacity of up to 500-600 W. Remember that the larger the diameter of the cutting circle, the most universal and the latter will be reliable.

The care of the choice of power tools is also due to a large variety of Bulgarian structures present in the market. Since such equipment is not unified, the cutting machine is built under a certain model and the size of the ABM. If the equipment is unreliable, then when it fails, it will be difficult to install another grinder in its place without the need to alter fixes and pendulum. That is why it is better to choose products from proven manufacturers - Makita, Bosch and so on.

Making a cutting machine with your own hands

Preparatory stage

Work on cutting machine starts with design. It is not possible to give the exact dimensions of the device, since the design depends on the model and size of a particular grinder. Nevertheless, according to the presented drawings, you can get an idea of \u200b\u200bthe dimensions and structure of the equipment.

The project sketch starts with the drawing of the case. It may take no framework, but a separate platform that can be mounted for a locksmith. In any case, the sizes of the device and the location on the housing of the main nodes are determined. Next, the UCMs and the airline distances of the mounting holes on the housing of its gearbox are measured. Based on these indicators, the drawing drawing is drawn to the pendulum. After that, the swivel node itself is designed. The smaller the distance from the hinge connection to the cutting circle, the hardest and more accurate will be the machine. In other words, the length of the pendulum should be the minimum possible.

At the last stage, the design is calculated how much and what material will be needed.

Photo Gallery: Drawings for the manufacture of homemade cutting machine

Drawing of a cut-out frame type. The dimensions of the frame are chosen based on the size of the tool used

Drawing of a cutting machine of pendulum type. Left marked ground sizes. Right marked features of the design of the pendulum

Step-by-step instruction

1. In accordance with the drawing, cut the blanks of the future machine. For frame and pendulum, profile pipes are used, and for console mount - metal-plastic, metal bus and steel bar. If the design is provided by the carrier platform, then the size of 4-5 mm thick is cut into size.
2. To the pendulum lever, which is a segment of the profile tube, weld the transverse axis (shaft) for the hinge compound. It is important to ensure the perpendicularity of the fastening of the shaft to the pendulum.

   After cutting the material to the pendulum lever, the shaft is welded

3. The P-shaped bracket is bend from the steel tire, the holes for the bolts are drilled in its side, with which the body of the grinder is mounted.

   For mounting to the threaded holes on the ESM reducer body, you will need a P-shaped bracket

4. From the steel rod, the envelope U-shaped clamp (stepladder) and the clamping bar for fixing the tool body to the pendulum is made. The latter is a metal plate length, 15-20 mm exceeding the width of the clamp. In the holes at the edges of the pressure plate, the threaded ends of the stepladder are freely included, and the fixation is carried out with nuts with suitable carvings.
5. After trying on the P-shaped bracket and the clamp to the grinder, the welding or threaded connection, these parts are mounted on the console.

   This looks like a grinding console to the pendulum lever assembly with the P-shaped bracket and clamp

6. Bearings that will provide the rotation of the pendulum will be pressed into supports. As the latter, you can use both ready-made factory bearing nodes and segments of the steel pipe (15-20 mm) with a diameter equal to the outer cutting of the bearing.
7. Bearing nodes handle the shaft on both sides. It is important that the connection is with a tension - this will eliminate unwanted longitudinal and transverse displacements. If the compound obtained for some reason is weakened, you can use the proven method - to fill the axis by the soldering iron, applying a thin layer of tin to its surface (it takes a soldering acid as a flux).
8. At a distance of 50-60 mm from the edge of the platform welded a pendulum assembled with support nodes. At the same time, it is important not to overlay the bearings, so these parts are wrapped with wet rags or constantly watered with water for cooling.

   The pendulum lever assembly with bearing nodes is welded to the platform at a distance of 50-60 mm from the edge

9. A coffee sheet welded a console with a mounted clamp and a P-shaped USM. The position of the grinder is chosen on the basis of personal preferences. There are different opinions on how to fix the grinder ("from ourselves" or "on ourselves"). Professional mechanisarines work with a tool, orienting a spark brake to himself, arguing that if Bulgarian for any reason falls out of the hands, the tool will fly into the opposite direction. Lovers most often work with medium or small grinders, so they prefer the disk to rotate "from Himself," because it allows you to control the cut and prevents damage to clothing. Fastening the tool, do not forget to properly place the protective cover - it must protect the disc running in the case of a disconnection.
10. The assembled machine is fastened with angular grinders. Focusing on the weight of the tool, pick up and install the return spring. To do this, hinges are welded to the bed and pendulum or drill holes with a diameter of up to 5 mm.

    So as not to damage the plastic body of the grinder, between it and brackets are laid rubber strips

11. Perform a trial launch of the grinder. First check the operation of the machine in idle mode. At the same time, pay attention to vibrations and hoppers of the work parts of the equipment, which, if necessary, eliminate.
12. Taking advantage of the cutting circle of the maximum thickness, the grooves cut the groove in the machine platform. If necessary, the grinder is removed and the slot is expanding to the desired size.

    This is how the improved focus with the clamping device looks

In the last stage, the stops for billets are fixed to the platform. Most often there are two strips (for a cut at an angle of 45 and 90 degrees), fixing them using a welded or threaded connection.

Often, the adaptation to hold the workpiece is supplied with a measuring instrument. Signing the metal ruler on the stubborn bar with the scroll point from the barrage disk, you can quickly and accurately cut off the detail of the required length. Optionally, you can install versions, vice and clamps of various designs. Such additional details allow you to do, for example, a complete incision or groove in a blank at any angle, free your hands and so on.

Do not forget to paint the device after all the conversion events are held. Even a thin layer of Enamel will save the equipment from rust and make its appearance more aesthetic.

Video: how to make a cutting machine from the grinder with their own hands

Safety technique

In the process of working on a cutting machine (as well as during its operation, in the future), security techniques should be strictly followed. Be sure to use a protective mask or glasses, and the USMs in such a way that the sparks can be directed from himself. High fire hazard equipment requires working in a ventilated room and away from fuel and lubricants. During the welding events, you should also use a protective mask, gloves made of thick skin, closed shoes and protective overalls.

Working with a cutting machine, do not try to speed up the process, overly pressing the tool. At best, such a hurry can end with a torn disk and the jammed nut of his clips.

Using a welding machine, ensure good grounding and avoid operation of equipment with bare parts of cables. Remember that the welding in the open area in the rainy weather is prohibited. As for the operation of the cutting machine, then when arranging a button to turn it on, installing a simple interchange with a power 12-volt relay. To do this, you can make a pedal with any non-fixed switch (for example, a button from the doorbell) and apply any solid-state relay, calculated for switching currents of at least 10a. As a power source, use a battery or battery with a voltage from 5 to 24 V.

The cutting machine from the grinder is a convenient tool that can be easily made if there is an electric welded skills and a plumbing tool. Made in just one day, the pendulum disk saw will save time in the future and will allow plumbing and welding work accurately and neatly.

Bulgarian is an indispensable tool when performing various construction, assembling and repair work. The main task of this apparatus is the rapid cutting of metal or stones. Also, thanks to special nozzles, it is able to carefully polish the surface of the part, clean it and eliminate deep and incorporated pollution (often it is rust). However, in order to expand the scope of the application of this device, many are purchased and even construct homemade adaptations for the grinder. And today we will look at what devices and nozzles are most in demand in construction, and how to make them with your own hands.

At the moment there are many different nozzles that allow you to significantly expand the scope of using a simple grinder. Such, for example, are:

1. Nozzles for sanding surfaces and removal of old paint.
2. Stannes.
3. Transporters (we'll talk about them at the end of the article).

It is worth noting that the majority of the owners prefer to buy ready-made nozzles in the store, rather than making them their own. They are not so expensive, and they are not difficult to find them. But some masters make these devices with their own hands. Read more about it below.

How to make homemade adaptations for the Bulgarian? Preparing tools

To perform these works, you will need the following devices:

• electric drill with a set of drills;
• screwdriver;
• drum discs with a diameter of 125 millimeters.

What should be prepared from materials?

You need to purchase (2 pcs.), From Duralie steel and the same plate. You will also need self-samples of 3 ... 3.5x16 ... 35 millimeters. You need to have 8 such elements.

Getting to work

First carved metal plate. Next, an angle is made from a duralous corner. It is easy - it is only necessary to make a cut in the form of a triangle in one of the shelves of the part and bend it at right angles. In the metal design of the plate, it is necessary to drill 6 diameter holes of 4 millimeters each. It is necessary to secure the handle, corners and wooden bar with self-drawers. It is worth noting that each of the holes should have a special recess under the screw of the screws.

The handle is fasten with BROs with two screws. The size of the fasteners should be 3x35 millimeters. So you will receive a detail of a M-shaped form. All these elements along with the plate are then going together. At the same time, 4 samotors of 3x20 millimeters are fixed.

So, the basis of the element is already ready. Now you need to establish them should be two - with dimensions of 60 × 60 × 45 and 55 × 30 × 75 millimeters. It is worth noting that the first corner must be accessed from 90 0 to 60 0. If this is not done, this product will not be fixed on the grinder. What to do next? After installing steel corners, Bulgarian herself is mounted on them. It is connected to the device with the help of its own handle on the one hand, and on the other - with the help of the bolt and lock nut of the M "series (8 × 20 millimeters). The latter is needed that the screw does not unscrew from the device during the sawing material. Installing the locknut on the handle is not necessarily, as you will keep it with your hand. All, at this stage, the cutting device has been successfully manufactured.

Stanina

Such adaptations for Bulgarians are used to facilitate the efforts accompanying the operator to perform work on cutting material. Agree, keep on the weight cumbersome Bulgarian for several hours in a row is quite difficult. For this reason, many masters make special features that allow you to work on cutting metal and products with almost one hand.

How to make such a bacal adaptation with your own hands? First you need to make a wooden box. It is enough to make only one side for fastening the grinder. All other walls are cleaned, legs are attached to their place.

But so that such Bulgarian is really effective, you must first adapt it to new "habitat conditions." What do I need to do? First you need to remove the protective casing of the tool. Next, the disc is put on the grinder. When he lean towards the side wall of the tool, you should mark where the slot for the start of the nozzle or disk is made. It should not be too wide (distance - so that extraneous objects do not fall inside the device). However, the gap can be expanded. It is done in cases where the need arises in a quick replacement of nozzles without disassembling the entire structure. Two wooden bars can be used as a support. All, now you can safely start working on cutting various materials and products.

About transport

TRANSPORT - the most important tool when performing these bars adaptations are indispensable when processing and cutting easy, using such a tool makes it possible with high accuracy to calculate the cutting angle of the part, which is best displayed on the quality of the work performed. In addition to metal profiles, this tool is also widely demanded when processing tiles, flooring and plinths. Homemade transportation is an excellent alternative to bulky and expensive tools, which are also referred to as specialized. Perhaps, on an industrial scale, the benefits from homemade equipment will not be, but in the household such an element will definitely be indispensable.

The principle of its action is as follows:

1. First, the tile (or other cut material) is placed on a guide corner with an antifriction overlay. The latter has high anti-slip properties, which prevents the ability to displays the part on the device.
2. Next, the blank is tightly pressed against the angle shelves, after which the operator exhibits the desired corner of the cut.
3. Then the cutting material begins. It is worth considering that for cutting it is enough just to click on the disk - excess efforts in this case have nothing.

Design

Constructively, these fixtures for Bulgarians consist of the following parts:

• corner of the retainer;
• loops;
• fixing bolt;
• basic parts.

Unfortunately, such nozzles on the Bulgarian cannot be made with their own hands, which is explained by their complex design. Therefore, it is best to buy such opposites in specialized stores.

The angular grinding machine (Bulgarian) is a universal power tool, with which abrasive processing of products from metal, wood, stone and other materials are performed. The turbine is used to cut and stripping small details or blanks. At the same time, it is often necessary to keep the instrument in the hands of a long time, which significantly complicates the qualitative performance of work. To reduce the load on the hands and improving the safety, a special device was created, which can be bought in the finished form or to build on their own from the girlfriend.

Purpose for Bulgarian

The use of the bed allows to trim products quickly and efficiently

Fastening the power tool on the rigid rack has several advantages. So, thanks to the bed, you will not have to keep the grinder in your hands, which will focus on the accuracy of processing the product. In addition, you eliminate the risk that the turbine can slip out of the hands from fatigue or negligence. In the grinders often there are special threaded holes for fixing on the bed, thanks to which you can position the tool at a convenient angle. A rotating holder allows you to change the vertical position of the tool depending on the tasks set.

Tools and materials

As a rule, at home, the rack for the grinder is made from profiled metal pipes, as they are very durable and reliable. Although some craftsmen are manufacturing lumber holders. In this case, it is desirable to use only the highest wood species that can withstand heavy loads and not deform during operation. As for metal structures, here the problem is only the need to use electric welding and the ability to work with it. However, if you think a little, most welding works can be replaced by drilling, that is, use bolted connections. In addition, this option will allow almost completely disassembled the machine.

The following materials and tools will be needed for work:

• welding machine;
• perforator;
• schlifmashinka;
• metal corner;
• profiled pipes and chapellers;
• powerful spring;
• 12 volts relay;
• bolts, nuts and a set of keys;
• shield from chipboard or metal (work surface).

Safety technique

As you understood, in the manufacture of metal beds you will have to work with welding. But before taking into hand this device, it is necessary to get acquainted with the safety technique. The welder deals with an electric current, so the incorrect handling of equipment can lead to irreparable consequences.

Before turning on the device to the network, you need to examine it. Make sure the insulation of the cables is not damaged. If the condition of the wires alert you, then do not use this welding until you replace them.

Connecting parts of cables must be made of brass or bronze. These metals have excellent thermal conductivity, so the cable in this case is not heated.

After an external inspection, we turn on the device by pressing the "On" button. When starting, only the sound of the working cooler must be heard. This suggests that together with the apparatus earned forced cooling. When working with welding, you need to remember the high temperature - the applied seams are very hot, so all manipulations with metals must be performed in overalls. Use special gloves, mask and boots on a rubber sole. The latter in no way should be forged.

Wear a respirator if the work is performed in a room with poor ventilation.

Preparatory Stage: Drawing

The dimensions of the frame are selected depending on the dimensions of the grinders

One of the key points when assembling a metal bed for the Bulgarian is the development of a competent drawing. This will make the device as easy as possible for operation, as well as avoid damage to expensive material.

First of all, you need to explore the ready-made model of the bed. To do this, visit any construction store and look at the designs that the industry offers. So you can understand how to make such a device. As for the drawing of the drawing, it is not necessary to possess special skills. Just right and easily remove the size from the finished product and transfer them to a sheet of paper. After that, you can proceed to assembling the bed.

For each turbine, you need your own drawing, since the adaptations from different manufacturers can be very different in constructively. It may be quite a small adjustment, and maybe you have to create a sketch from scratch.

Instructions for the manufacture of beds for the grinder do it yourself

At home, it is easiest to make a design of two frames and holder

The simplest bed for the grinder consists of two frames and holder. The procedure for performing work is as follows:

1. Cut the profiled pipes and drill holes in them according to the drawing.
2. With the help of welding, we make the lower and upper frames of the future design.
3. Cut from iron sheet or chipboard work platform. If the turbine is powerful, then it is better to use a metal.
4. Fix the lower frame on the platform and weld the upper one.
5. To the vertical frame with the help of bolts fasten the holder. He must rotate freely like a pendulum.
6. Install the spring. It is needed to return the tool to its original position. One end of the spring is attached to the upper end of the vertical frame, and the other to the holder.
7. For ease of operation with the device, set the switch switched through the relay by which the power to the tool will be supplied.
8. Purify the design completed view by covering it with paint.
9. In the end, equip the face with a moving line with the limiter. This will allow to crop products as accurately as possible.

After assembling the device, install the grinder in it and check the operation of the tool at idle. If the circle does not touch anything and rotates freely, you can use the design to be destined.

The holder for the turbine can be equipped with a shock absorber. This will move the cutting tool on the work platform.

Video: Review of the homemade bed for the Bulgarian

The bed for an angular grinder is a very useful device. With the help of this simple design, we free your hands and achieve the maximum smooth cut without the use of vice. Such a device is able to replace the cutting saw, while the grinder can be returned to a mobile state at any time.

Bulgarian Universal tool for home and the use of this tool in everyday life is very diverse. They can be grinding, cut off polished to rip off, but the most interesting thing is that from it you can make a cutting machine for metal, a device that makes it possible to cut the workpiece with smooth edges, and reduces the load on your hands due to reliable clamps and stops.

Consider how do you make a rack for the grinder?

Since the size of Bulgarians in different manufacturers vary in some limits and do not coincide to a millimeter among themselves, the number of racks for fastening the tool will be much and in a variety of design. In this case, an individual approach to the design and compliance with the basic principles of the rack manufacturing is important.

List them:

• reliable fastening of the tool;
• the presence of a counterweight;
• reliable stops and clamps;
• work with compliance with safety, protection.

Consider these items in more detail to determine which rack we need.

Reliable tool fastening

Many, catching up with the idea of \u200b\u200bmaking a rack, looking for drawings on the Internet, without thinking that it may not be on their instrument, because each model is individual and the mount to it needs to be done, as they say.

I suggest to consider different examples of how people made a mount, and we will take the best of each. Here are some photos of the location and fixation of the Bulgarian based on the needs and desired functionality.

As you can see from the photos of the brandy for each individual, but the most important thing is that in each of them the tool is secure securely. In the first image, the tool is inserted into the frame and is fixed by bolts in the places of attachment of the handle.

The second example is similar to the first, only the frame has an individual design and the control knob is added to it, in the form of a welded pipe 20x20 to control the effort of the cut and convenience.

The third option generally conquers its simplicity and minimalism. Bulgarian is attached for the protective cover, in which the bolts are done under the bolts and the entire machine consists of a minimum number of parts.

Bulgarian is an electric tool with which the large amount of construction work can be performed. It cuts metal parts, stone and other solid materials. It can be cleaned and grind the surfaces, trimmed under the size of the ceramic tile. An indispensable tool for assembly, construction and repair work. Use it for home and in the workplace.

Safety regulations

Bulgarian is a dangerous subject with huge speed. If you do not comply with the rules of use, you can be very injured. Before starting work and making a homemade rack for the Bulgarian, be sure to read the safety regulations.

1. When cutting solid materials from under the abrasive circle, various particles of metal or stone are flying out, sharp fragments. The first reliable remedy for the wreckage flying in the face of the master is the type. There are cases of rupture of the circle itself. Shardings can hit glass and break them, so glasses should be reinforced with a protective grid. Do not suck, it's your health.

2. On the Bulgarian it is necessary to have a screen surrounding knives. Some workers, putting the circle of a large diameter, remove the cover that combines the movement. Also in manufacturing with your own hands can even get rid of it. In no case cannot be done. It is mandatory and in such a way that the operator is behind it. Thus, the fragments are fighting off the casing and fly in the opposite direction.

Stand for Bulgarian

In working with this tool, many masters have to perform monotonous identical cuts. Holding her in his hand, the strip of strip is very difficult to achieve. Strong turns and vibrations do not allow a person to keep the product exactly in one position, be sure to shift. So that this does not happen, buy a rack for a grinder.

But with strong constant loads and vibrations, the support details are loosened and crackled. Yes, it is designed mainly to work with a circle of a maximum of 125 mm. Large there will not fit. If you want a barn rack strong and reliable, then the best option will make it with your own hands. An independent manufacture will add confidence as mounts, the master will be calmly working.

Small home-use device

This is made only for the use of the house, for minor work. It is made from plywood and wooden bars. The tool itself is installed inpatient and does not move. Two plywood leaf are taken. At the lower square is strengthened by the clamps of the Bulgarian and the timber is screwed in the form of a stand.

The second part on the furniture hinges is placed on top. The slot is cut. The advantage of this location is that the master does not hold the tool in his hands. Also, the circle is visible in part and will not be able to fly, inflicting an injury to the operator. Such a light performed device for cutting small metal corners, aluminum profile, ceramic tiles.

Metal welded construction

In the manufacture of this model, you need to have a drawing of a rack for the grinder of your size.

Work is performed from a metal profile and tubes with a welding machine. The platform for the stand should be severe, it is able to withstand high power vibrations. Further perform the upper part, to which the tool itself is attached together with the casing. On the bolts, the design is installed to a welded corner on two metal legs.

In order for the brotank stand smoothly, the upper and lower panel connect the strong spring for which the holes are drilled. The platform is welded a guide corner at a right angle to a circle.

Pendulum stand

What is good for the grinder stand in the form of a pendulum, so it is a simplification of the sawing process. Due to the stop on the table and the system of this design, you can perform the work of various complexity and to trace the materials of any density. With such a device, you do not need to apply special efforts, the pressure is carried out by the mass of the tool itself.

For the manufacture of this option, the support will be needed by spring, two loops, metal photographs, corners and welding machine. It is also desirable to have a strong iron table, which the entire design can be installed. Having skills of such work, the master will quickly make such a pendulum. It is much easier to work if the handle is long and comfortable. Fingers are at a safe distance. No need to bend. Sparks and fragments fly in the opposite direction. Yes, and having a free approach to the table, you can perform work with large-sized materials and products. It is convenient and allows you to perform a variety of processes.

Choosing a rack that suit you in all respects, do not forget about safety technician. Then work will only bring joy.