We select material for kitchen apron - practical advice. Apron for kitchen (real photo examples) watch aprons for kitchen

The kitchen apron is the most important part of the kitchen design. This wall covering not only protects the wall above the working surfaces, but is a significant element of the interior. The place above the working area is constantly exposed to large temperatures and continuous contact of water and moisture. All this suggests that the consideration of the issue of choosing a suitable material, it is necessary to come seriously and with full responsibility.

Basic rules for cooking apron

The height of the apron, as a rule, is selected so that you first find it convenient to care for it, as well as depending on the arrangement of the headset. That is, for example, if the hostess is low growth, respectively, the cabinets and headset are hung down, so the apron will be low.

Good to know! Usually the height of the apron varies within sixty centimeters. If there is a gas stove in the kitchen, make a apron with such a calculation so that the distance from the surface of the slab to the exhaust was at least seventy five centimeters.

In general, when determining the size of the apron, take into account the fact that its upper and lower edges should go a little under the headset and the countertop, respectively. Be sure to place the plinth and treat it with a sealant on a silicone basis in order to avoid moisture in the worktop.

Choose the best material

Do not choose for the manufacture of apron materials with a porous structure, as moisture and fat will accumulate in the pores. Clean such a surface will be quite difficult. In addition, the presence of seams on the apron greatly complicates the cleaning process. It is advisable to handle joints and connections with silicone-based sealant.

Try not to save on apron if the kitchen interior is generally low-budget. Then he will become exactly the highlight, thanks to which the kitchen design will play with new paints. And on the contrary, if the overall design is filled with juicy colors, pick up more neutral shades of the apron.

Standard color for apron -. Suitable practically for any interior. And so that pure white apron can not bored, dilute it with bright inserts.

Want a cheerful diversity? Fine. Choose bright colors for apron or rich drawing. However, such a bold solution will necessarily require a roll-up with a common design. Therefore, try to make the color of the apron to repeat in the colors of finishing and accessories.

Ceramic apron: tested by time

The most widespread material for apron is a ceramic tile or small porcelain stoneware. In terms of cost, this is not the cheapest material, rather an average price category. But there is a huge selection of colors and tones.

Ceramic tile has good moisture resistance, but do not choose a tile with pores. The best option is glazed (glossy) surface. The kitchen apron of this tile is perfectly mounted, but you should not use potent detergents. Over time, the rapid material inevitably darkens, so choose the highest quality materials for the grout.

It is difficult to find the material with which it would be difficult to combine ceramic tiles, natural wood - is no exception

Photos: New season

The photo shot is an excellent alternative to classic ceramic tiles. Mounting and care technology is the same as in conventional ceramics, the differences are in the production process of its creation, which is to apply a qualitative, full-color pattern on the prepared surface.

The photo shot is the original solution that your interior will decorate. Material moisture resistant and durable, however cost more expensive than a simple tile. In addition, if the print pattern was made by sublimation or to order, then with time the image can be filled or crack. Be careful when using cleaning agents.

Photo printing is a new direction in the design of a kitchen apron, which easily found his audience

Glass apron: practical and beautiful

A particularly attractive designer reception is practical and unusual - a kitchen apron of glass. Glass, as you know, is very easily washed away, moisture and high temperatures are not afraid.

The cost is sometimes more expensive than ordinary tiles and other materials. The complexity of processing the source material is failing. In addition to the glass, the cost of the installation will include: the purchase of fasteners and rails, as well as the cutout of holes for the outlet.

Installation of a glass apron is a sufficiently simple process, if there is snacks and a small experience. Fully, you can manage in just a couple of hours. However, it is necessary to be extremely careful, especially if the installation is carried out with the help of fasteners, and not glue, since there is a risk of damage to the apron.

When used to install the apron of special fixtures, it will not be necessary to perfectly align the wall, since the gap remains between the skin and the wall (you can even hide the old coating). Under the glue, on the contrary, it will take full cleaning and alignment of the wall.

If you choose a good apron, it can last long enough, at least ten years. Provided that it is high-quality calene glass and inkjet printing with special paints using ultraviolet rays, and not cheap plexiglas.

The material has excellent moisture resistance, it is easy to clean. For daily care, conventional glass-purity substances will fit. In addition, you will not have to clean numerous seams as on the tile. The only disadvantage can be considered that the dust, dirt and divorce are much more visible on the glass surface.

Apron with a mirror surface

Very interesting and unusual solution - apron with a mirror surface. However, it is not all like everyone, so before you do it in your kitchen, make sure that the apron will harmoniously fit into the interior of the room.

Using mirrors, you can easily adjust the space. In addition, such apron visually expands the space, gives the effect of perspective and due to the reflection of light makes the kitchen brighter. From the disadvantages can be noted: the groin, forever reflective objects in the apron, including the reflection of the owner of the kitchen.

Mosaic for the kitchen on apron

In the mosaic apron at the same time the brightness and mood, and the dynamics in the roll-drawn of different color shades are present. Such apron is perfectly combined with a common interior.

However, the cost of decorative mosaic for the kitchen is sufficient, so be prepared for the fact that each square will have to fork.

In addition, a considerable amount will have to pay a tiled master, as you can manage to cope with the work, you can hardly succeed. For the tile, the adhesive and grout will be required. An alternative to mosaic can be its imitation made of ceramic tiles.

As stated above, the mosaic mosquito process is very complex, long and not tolerant amateurs. In addition, the grout process increases. If you still decided to make a apron on your own, you can simplify work, choosing a mosaic on the grid.

Mosaic is an excellent material for finishing the curved surfaces, whereas on a straight surface it will give all errors and flaws. Therefore, the preparation of the walls is required as solid as under the tile. For durability, the mosaic is not inferior to the tile, subject to all installation conditions (up to twenty-five). Mosaic is not afraid of water, it is well mounted. The only drawback is numerous seams. In order to avoid their darkening, acquire a better epoxy grout.

Plastic - economically and convenient

Plastic - a kind of material economy class. It can be installed from polycarbonate or fledged Fiberboard, chipboard or MDF. Plastic based on MDF is relatively inexpensive, easy to install and care, medium resistance to moisture and mechanical effects.

In addition, its installation technology does not require perfectly smoothly processing the wall, as not close, but on the tree bars. It is easy to dismantle when repaired. If the material is high quality, then last for many years.

Plastic based on chipboard is even cheaper than the previous option. It is also simply mounted, does not require careful wall processing, easy to maintain. However, such material is very unstable to the effects of moisture and can be swelling with long-term contact with water.

Polycarbonate apron, like plastic, relatively inexpensive and easy-to-install material that does not require special training. As a rule, it is transparent, which makes it possible to apply on the back wall of a decorative pattern on a film or wallpaper.

Of the minuses: a non-topable appearance, over time loses its transparency.

Artificial stone or metal: compare for and against

Noble and expensive looks like a kitchen apron made of artificial stone. And expensive in the literal sense. Usually this apron comes complete with a worktop and looks very harmonious and finished. Installation of acrylic stone is better to entrust the experienced master who can guarantee the quality of their work done. Be sure to align the wall.

Artificial stone - material durable and durable, mounted without seams and joints, moves well and is simply washed away. In addition, it is possible to restore the damaged surface.

Panel from artificial stone - a great option to decorate the interior with a bright and fairly attractive element

The metal apron can be a sheet of stainless steel with a decor applied to it or simply a flat glossy surface, and it can also be a metal tile of various sizes, which is glued to walls on the principle of ceramic.

Tree and brick: finishing with natural materials

In the event that the interior of your apartment is made in the Loft style and you want to focus on this attention and your kitchen, then a brick apron either from a natural tree, as nothing better will help you create a special atmosphere corresponding to this style.

Of course, you should not forget that the brick has a porous structure, so its surface should be reliably, which adversely affects its appearance. To do this, it is enough to cover it with a special varnish on a safe acrylic basis.

A tree, unlike bricks, not so capricious material, but nevertheless also requires special care. The only thing that should be collapsed is that for kitchen apron, wood without a special coating is not suitable. After all, it is no secret that this material absorbs moisture well, accumulating dust and unpleasant odors in its structure.

That this does not happen to be treated with carefully special protective oils on a natural basis, which will prevent not only moisture from entering, but will also prevent the material drying.

Parquet board is the type of floor wooden coating, which can be used, both on horizontal and vertical surfaces.

In short, whatever you choose for finishing apron:, decorative plaster or, all these materials will definitely require special protection against moisture, dirt and fat.

We hope that this article will help you to decide on such a huge and diverse choice of modern materials, which are used with the same success when making apron in the kitchen.

Remember only one thing that the kitchen is cozy not only bright colors, beautiful finishing materials and upholstered furniture, but also a positive mood of the owners, creating a friendly atmosphere.

Among the abundance of materials, colors, the textures of choosing an apron for the kitchen is to make an important and sometimes difficult thing. It should not only protect the wall from moisture, fat, but also to become a highlight of the interior, attract attention, complement the design - in general, perform a decorative function.

In this article, we will offer you interesting ideas for the design of the apron, as well as tell you how to choose the right finish and select Decide on the choice of color under the wallpaper.

4 Rules for choosing apron

The first thing to determine is. Standard altitude will be about 60 cm. But the location will depend on the headset and the size of the room. If you are lucky and in the kitchen you have high ceilings, you can place upper lockers at a distance from the tabletop at 70 cm. If the headset is an angular, and the kitchen device requires carefully, the height is suitable in the minimum 40-45 centimeters. In this case, the color of the apron must be as light as possible. What else do you need to know by choosing protection for the walls?

More interesting products - metal aprons are suitable for hosts, always observe cleanliness. Wash apron will have to after each cooking - traces of hand, water and steam will remain on the panel. It can be said that all glossy products possess such a disadvantage - traces and divorces remain on their surface. Of course, it is easy to clean them, but for flax stains will have to constantly monitor that they do not spoil the appearance of the kitchen.

Apron color: for bright, classic and stylish kitchen

In this matter, the apron for the kitchen can be different - monochrome, brilliant, color lime, wenge and neutral. You can choose it so that both the headset and the apron had one color. You can play on the contrast when the wallpaper and apron are made in different range, and you can merge them together. In general, ideas are limitless.

Since modern kitchens are most often decorated with wallpaper, then the question arises - can the apron repeat their color? And apron, and wallpapers can be seamless in the following cases:

You need to expand the space and create the effect of "easy kitchen". In this case, both wallpapers and the color of the apron should be selected the same. For the style of High-tech and modern, you can choose a white or shade of Wenge tile for walls and the same snow-white and apron under the tree. In this case, the color of the latter may differ glitter.
The headset and wall decoration have a fundamentally different color. For blue cuisine or kitchen, for the design of which the shade of Lime is used, as well as sand walls, it is better to pick up the same calm hint of the apron. Red apron and lime will look good when the headset has the same motley color, but the walls are classic white. In this case, the apron will play the role of the unifying element.

A practical solution - when the headsets and the apron are selected in one color. Here the ideas of design can be any. You can select it under the color of the wenge or one tone with the worktop. It will look good and contrasting colors. For example, for blue countertops, you can look after the same saturated apron. But the popular shade of Lime, in which the facade is made, it is better to supplement the apron of a quiet shade.

What to watch apron, if photo wallpapers are used on one wall? Here are two options:

Non-standard aprons for the kitchen

Yes, we know that the apron for the kitchen should be, first of all, practical and durable. There should be no fat stains on it even after a long cooking, it can be quickly cleaned and use chemicals. But I want to not just pick up a practical option, but also beautiful panels that will surprise an unusual design. Let's look at unusual, which will fit into the kitchen interior.

Metal mosaic. Mosaic of metal pieces will add to the index of originality. You can choose a mosaic laid out with small bricks, and you can look after combinations of gilded and metal with a silver tide. This option is good if your is performed in gray, and the kitchen is replete with a metal glitter.
Frosted glass. The ideas of performing glass will enjoy connoisseurs of motley beauty. Glass can have a fashionable lime shade, a rich blue, scarlet or lemon color. If you correctly pick up a shade, glass will become a motley accent of the kitchen. By the way, if you have pictures in retro style, you can choose a panel with the same stylized pattern. Wall mural black and white color will be harmonized with drawings in retro style on the panel.
Mirror. Such a material will allow expanding the space and will definitely become a non-standard solution. Performance ideas can be different. For example, the mirror is cut and stuck with bricks or geometric shapes. If the headset has a monochrome color, it is better to choose one big panel. If you use the photo wallpaper, the mirror will reflect the drawing and give the volume of the kitchen. Another advice is the spots of fat and divorces will not be visible on the mirror with the effect of antiquity.
The apron with a hint of wenge will look noble and stylizing under the tree. Wenge is suitable for the classic, modern style, and the tree is to create a warm atmosphere.

Kitchen apron is called a special coating located near the workstation and ensuring the protection of the wall. However, apron in the kitchen interior is not only a functional surface, but also an important element of the interior decor of the kitchen room.

Of course, moisture and fat are accumulated on the wall along the workplace from regular cooking.

Accordingly, this zone must be made of materials as resistant to moisture, fat, chemicals and elevated temperatures. At the same time, the apron must organically fit into the kitchen interior and easily clean.

Therefore, when repairing the kitchen, the question often arises, what to choose apron into the kitchen? What finishing materials are best used?

Classic option - tile

The tile for the kitchen on the apron is the most sought-after material. This is due to the fact that the tile has the following properties:

Increased resistance to household chemicals;
Lack of difficulties in care;
Increased density due to which fat repelling;
Increased resistant to temperature differences and moisture resistance.

Its attractive appearance and a large range of species, among which there are not only matte and glossy options, but also smooth, embossed surfaces of a wide variety of color solutions, forms, patterns and sizes make this material one of the most sought-after.

Ceramic apron for the kitchen is practical and beautiful. With the help of a tile, any kitchen interior can make fashionable and stylish.

Moreover, manufacturers every year produce a huge number of new collections, and not only different colors, patterns and forms, but also textures. With the help of modern ceramic tiles, you can create original design of the kitchen.

Mosaic

Exquisitely and luxuriously looks a design, which uses a mosaic for the kitchen on the apron.

It uses a rich variety of materials for finishing the apron of kitchen, among which there is ceramics, pieces of glass, smalt and metal plates.

However, the creation in the working area of \u200b\u200bthe kitchen of the mosaic panel is the task not simple and most often, for only a specialist.

At the same time, ready-made mosaic sets appeared on the market, which includes a special grid, using a grid, you can make the original mosaic type apron alone.

A natural stone

A huge variety of solutions when finishing the kitchen apron in the photo presented in the catalog allows you to carry out any idea of \u200b\u200bthe designer, but the natural stone is distinguished among them. However, to create an organic design it is necessary that the countertop also has been made of stone.

I solve how to make an apron in the kitchen from a natural stone, first of all, you need to decide which stone is needed for finishing.

So, granite features hardness and density, as well as a huge amount of shades, starting with the most popular pink-gray, finishing rare blue. This material is characterized by increased strength, resistance to low temperatures and moisture resistance.

Another material that is widely used when finishing the desktops of the kitchen is marble. This stone has a porous structure and a large number of microcracks. From the point of view of practicality, it is not the best material, however, its beautiful appearance makes it in demand.

When finishing, the aprons rarely can be found such material as basalt, because it is less attractive and heavy. However, it has excellent performance.

Wood

Recently, in fashion such eco-friendly materials as a natural tree. When finishing the aprons, the following types of wood materials are usually used:

MDF. It has increased resistance to microorganisms and fungi, is not subject to mechanical effects and moisture resistant.

Laminate. Easily mounted, appearance is attractive, but does not have moisture resistance.

Array. Its main advantage is that with its help you can make a luxurious design, however, this material is susceptible to high temperatures, exposed to pollution and has a low moisture resistance, this designer solution can be viewed on the photo Apron for the kitchen in the catalog.

Glass apron

Exquisitely and sophisticated in the kitchen will look an apron of tempered glass, which has high impacts, fire resistance, resistance to mechanical and chemical exposure, besides, it will not be difficult to care for such apron.

Glass apron is convenient because in the interior it can be used not only as a simple transparent material, which will emphasize the luxurious finish of wall surfaces, as in the photo of a modern kitchen with a fashionable apron from the catalog, but also make a pattern on the glass, thereby making kitchen design more Interesting.

You can also use a combined reception in which two glasses connect a thin colored film.

Stock Foto Novelty apron for kitchen

Your repost will change the Internet :)

The apron for the kitchen is part of the wall between the tabletop and mounted cabinets, the necessary element that protects the walls from moisture, soot and fat. The height of the apron itself is about 60 cm.

Basic requirements for apron:

practicality and ease of care
resistance to temperature drops
resistance to chemicals
attractive appearance

In order for the apron to serve as faithfully and regularly pleased the eye, to choose a material for its device should be approached with full responsibility.

1. Materials

What material to choose?

The aesthetic and operational properties of the apron directly depend on the material from which it is manufactured.

1. Tile

For the device, the apron can be used both ceramic and glass tiles.

Spearly expanding a small space will help a mirror apron, however think if you want to see yourself close-up behind the cutting of vegetables or a cutting of meat.

Advantages of glass:

Practicality
Aesthetics
Originality
Strength
Hygienic
Durability
Heat resistance

Disadvantages of glass:

Does not fit into every interior
Chance
High price
Relative fragility

So that the glass does not lose strength, it should be freely staying on the mount. The glass on the wall is fastened with clips for silicone gaskets.

3. stone

Natural stone for facing is most often used in the interior when a tabletop is made of stone. At the same time, such furniture is very expensive, however, and looks too.

A cheaper analogue acts artificial stone, allowing you to create a monolithic surface of the table-top, turning into apron. At the same time, you can, how to perform relief at the upper boundary, and make it a multi-level. And if the natural stone absorbs moisture, it is easy to scratch it easily. Eliminated from scratches will be either grinding or the laying of polymer.

Ideally imitates the stone such a finishing material, like a litter member - a compound of ceramics and marble crumbs. The material has a smaller weight compared to a stone, a more affordable price and is attached to glue.

Benefits:

Durability
Impact resistance
Easy care
High temperatures resistance
Hygienic
Excellent aesthetic qualities

Disadvantages:

Considerable weight, especially natural stone
High Cost (Natural Stone)
Gigroscopic

Mounted using tile glue, special mastic or mechanical way.

4. Mosaica

An option from mosaic is one of the most expressive and elegant methods of decor. Regardless of the material (glass, ceramics, metal), the ideal option for an uneven surface that hides all the flaws of the walls.

The apron made in the pastel range for the kitchen from the mosaic harmoniously fit into the interior, and the use of a combination of bright colors will give the room with dynamism and play on the contrast with furniture and walls.

Benefits:

Beauty and originality
Long service life
Moisture resistance
Resistance to temperature drops

Disadvantages:

High value material and styling work
The complexity of laying
A large number of seams
The need to use epoxy grout
Dummonation complexity

Mosaic, despite all the complexity of the device, is one of the most spectacular materials.

Sheet stainless steel is the perfect material for a metal apron, which is harmonizing with any type of finish. Steel sheets make it perfectly even and perfectly fit into the interior in the style of High-tech.

In the kitchen in the style of Provence or Shebbi-Chic is better not to use due to the visual coldness of the material.

Metal variation is a ceramic tile with a metal coating, which gives the tile volume and decorativeness.

Benefits:

Strength
Heat resistance
Long service life
Hygienic
Mechanical resistance
Fire resistance
Beautiful aesthetic characteristics
Affordable price

Disadvantages:

Chance
Visual coldness
Complexity of care

Metal apron for kitchen with glue. At the same time, metal panels first need to fix on moisture-resistant phaneer with liquid nails, and only then hang onto the wall.

6. MDF.

MDF, perhaps, one of the cheapest materials for the apron device. Very often comes with a furniture header, it is quickly manufactured and easily mounted. Ceramic tiles and MDF stones are inferior only by strength, moisture resistance and mechanical damage to the material is quite high.

As for fire resistance, this material is better not to use this material in the kitchens with gas plates.

Pluses of material:

Affordable prices
Easy installation and dismantling
Universality: fit into any style
Moisture resistance
Resistance to mechanical damage

DISTRIBUTY
Felicness
Defection in deformation
The impossibility of additional decoration

An apron is fastened from MDF on liquid nails or brackets on a special framework.

7. Wall panels

MDF or metal coating laminate can be used as a material for the manufacture of wall panels.

Very often, the wall panels offer furniture manufacturers, such an apron can, how to give the interior wholeness, and make a variety of interior.

What are the good panels:

Decorativeness
Resistance to abrasion and chemicals
Hygienic
Easy installation and dismantling
Low prices

Disadvantages:

Low heat resistance
DISTRIBUTY

Wall panels are attached in the process of mounting the furniture headset to the rear walls of the table and the mounted locker.

8. Plastic

This is the optimal ratio of price and quality, ease of installation and resistance to pollution. Creating an apron from PVC sheets is available even newcomer, and the design of the front side will pleasantly surprise even a recovery buyer.

Low price
Relative strength and durability
Variety of color decoration

Unstable to mechanical damage
Deformed from water
Firewood
Eliminates harmful substances

Installation of plastic is carried out using glue.

9. Tree

The use of natural wood is not always appropriate, which is due to the operational characteristics of the material.

For the apron device, a set of shields made from solid wood strips are mainly used.

The surface of the shields is grinning and impregnated with butter, varnished or paint. Map shields, compared to the usual tree, have less hygroscopicity.

Benefits of a tree:

Ecology
Naturalness
Decorativeness

Disadvantages of wood:

Weak moisture resistance
Weak heat resistance
Chance
Cleaning complexity

Wooden plates are attached to glue, screws or dowels.

Choose color

The kitchen apron, except for the protection of walls from fat and dirt, also performs a decorative function. It can be both neutral, harmoniously fitting into the overall interior design, and a bright spot, striking and lifting mood.

Neutral

Does not attract attention, is a purely functional element. As a rule, it is selected in the tone of the furniture headset or on the tone of the walls. Allowed to create a neutral apron are also beige, dairy, tea rose color and champagne color.

It looks great in the interior made in the style of minimalism or in the Scandinavian style. Maybe how to emphasize the color of the headset, so drag all the attention of yourself. If the walls, furniture and curtains are made in one color scheme, dilute and revive the interior will be able to the apron for the kitchen, the color of which is different from the main tone.

Bright

Creates a mood, but comes far from all. Requires use in the decoration of bright details of the same color (towels, fittings, plinth). However, remember that even the slightest mess will be noticeable against the background of a bright wall.

Apron decoration

For a device, the apron can be used mosaic, thematic panels, skinned with photo printing or picture of your favorite artist, ornamental tiles inserts. At the same time, the main thing is to accurately calculate the amount of material, because it will be very disappointing if the part of the story panel will be hidden behind the lockers.

We remind you that remont-volot.ru is in

One of the most important elements of the design of the kitchen is the apron - part of the working wall between suspended and floor lockers. This zone is most polluted, especially in the area of \u200b\u200bwashing and plates, because along with the aesthetic requirements, tight requirements for practicality are presented to materials for finishing. Only then an apron for the kitchen can be considered good when it is pleasant to look at him and it is easy to care for him.

What makes

A few more decades ago and the question, from which the apron did not occur in the kitchen: if you're lucky to find a tile, we did from it if not - just painted with oil paint. As one of the options - glued ordinary paper wallpapers, which were covered with varnish. That's the whole choice. Naturally, the tile in this case is the best of the possible options.

Composite apron for kitchen - from tiles and mosaics

Today the choice is much wider. There are both traditional tiles and many other materials on the apron for the kitchen:

Ceramic tile and mosaic.
From tempered glass with applied photo printing.
Stone and materials based on it (porcelain stoneware, for example).
Plastic and plastic panels.
Metal.

Despite the abundance of materials, ceramic tiles are still most popular. And all because it is in a very wide range of colors and sizes. The second most of the prevalence becomes an apron of plastic - it is easy for him, and it is still inexpensive. Therefore is popular. In third place, perhaps, a kitchen apron of glass. And all because it gives extraordinarily wide possibilities of design and design. The only disadvantage can be considered a high cost. All other ways of designing the wall of the working area are not very popular. Some because of not the best qualities (MDF, for example, does not like moisture and high temperature) or the complexity of wall mounting (porcelain stoneware). However, all these materials can be used.

Dimensions

In length, usually no questions arise: the whole wall or part of it, which is occupied by the kitchen head, requires special care. Therefore, with a length, everything is simple. But in the width of the lined zone should be more open space. That is, the finish should begin below the level of the tabletop of floor lockers and end above the level where the suspension cabinets end. This stock is desirable in the region of 5 cm. More or less depends on the size of the finishing material, in particular the ceramic tiles.

Since there is no lockers over the slab, then the apron is made in this place above. And again: His width should be such that the lockers beside the sides were lying on the tile. So remove more convenient.

Apron from tile

The most traditional view of the workplace finish in the kitchen - ceramic tiles. It is good because it is easy to wash, has a long service life. Modern technologies allow you to make it different shapes, colors and sizes, which gives ample opportunities for design.

Lack of tiled apron in the kitchen - the complexity and duration of the installation, the high price of the tile itself and on the installation work. The disadvantage can also be considered the presence of a large number of seams. They are styling with special compositions, but it is the seams that are dirty and lose attractiveness primarily. You have to remove the old grout and again to process them new.

However, it is the apron from the tile most often made in the kitchens. The tile may be small - a square with a side of 12-15 cm.

There is a tile in size more resembling bricks: rectangular shape. This shape of the tile is called the Kabanchik. It is more complicated - more seams, but the view of the apron is interesting. You can find the model "under the brick", and you can make a blue or green. Everyone looks good.

Dark blue tile in white kitchen - contrast and unusual

There are large-format ceramics. It may have sizes with a side of 60-70 cm. Moreover, it can be both square and rectangular. You can choose such a model that one unit will overlap the entire height of the apron. It is good because this apron has fewer seams.

Flowers on the walls - pretty

There are collections of tiles of different nonlinear shapes, with patterns. They look, of course wonderful, but it is more difficult to care: all the slits, irregularities and bends rub more complicated than a flat surface. Another lack of such a tile is a high price, much higher than the average. If all this does not scare you, keep in mind that you need to order it with a stock of about 10%. First, inevitable waste when laying, secondly, the battle occurs when delivery, thirdly, if you are a little mistaken counting, you will have to wait again for a long time, and not the fact that such a tile will be. Many collections are produced in very limited quantities. And they simply may not be. For the same reason, you must always leave several pieces in case of repair. After a few years, even mass collections are removed from production.

There is still a ceramic mosaic - a very small tile, from which you can collect whole panels. It is even more complicated, but the wall is very spectacular.

There is another kind of ceramic tile - with photo printing. On the ceramic surface in front of the roasting is applied by special ink pattern. After it is covered with icing and fixes at high temperatures in the furnace. On this technology, you can even apply photos, but fruits or flowers are often chosen for kitchen aprons.

As you can see, only the options of the tiled apron into the kitchen are already a lot. And there are another 5 other materials.

Glass Kitchen Apron

This type of material began to use to finish the working wall in the kitchen relatively recently, but it quickly conquers popularity. It is even easier to care for the glass apron than the tile - the seams are almost no, the surface is smooth. You can apply almost any drawing - from a smooth color to a surround photo. The technique of applying photo printing on the glass is called "Skinali". It is on the aprons in this embodiment that the volume 3D pictures can be applied.

Floral motifs are one of the most popular in the design of the kitchen. They soften the forced severity of furniture lines Black and white kitchens - contrasts in everything

How to make yourself photo printing on glass

The only minus glass apron is its high cost. This is due to the complex drawing technology. But you can make it yourself. The technology is not the one that is applied in enterprises, but craftsmen on the craftsmen to find a way out of any situation.

For the manufacture of a glass apron in the skin technique at home take two glasses relative to a small thickness. If you find or buy tempered - excellent, but also the usual, as practice has shown, serves a long time. Ask in the glass workshop to process the edges and drill holes for fasteners (or do it yourself if you can). Two glasses must be absolutely the same in size, the holes for fasteners must also match.

One of them passes a film with a pattern. It can be a finished self-adhesive translucent film that is usually sold in stores selling wallpaper. You can order printing on a film of any image in a specialized workshop (perhaps you will be helped in an advertising agency that are engaged in outdoor advertising).

The glass is cleaned from dust, degreases (a mixture of water and means to wash the dishes or means for glass), wipes, then sprinkled with water from the spray. From the film remove the protective layer and on the one hand are glued to the wet glass: it is more convenient to work on it and there is less chances to make an air bubble. Then they take a tight and elastic material with smooth edges (it is possible to rub the spatula and are expelled from under the films of excess water. The main task is to prevent the appearance of air bubbles. The glued film is left to dry for several days, and then the holes under fasteners are done in it.

Both pieces of glass are folded and in such a form attached to the wall. The film is obtained from both sides and is perfectly protected from any influences. To exactly with time with such apron, nothing happened, the junction on the perimeter should be missed with silicone sealant (not acrylic, he turns through time). You can make it without a second layer of glass, but then the chances of the fact that the film will break down, or the dirt will fall for it, which will be visible.

Apron from MDF and LDSP

If you need to quickly and inexpensively separate the work wall in the kitchen, you can install an apron from the panels. You need to choose from moisture-resistant products with a robust coating: Wash often. Because MDF is taken by medium or high density. The more density, the better: with a smaller thickness of the panel, it turns out more durable, but more dense material is more expensive.

It is installed on furniture screws or if necessary on a dowel-nail. Previously in the required places the hole is drilled. The diameter of the drill is the same as the rod of the metric or a little less. So that the caps are not sticking out, in the panel make the drill of a larger diameter than the size of the cap makes a slight recess. In the store, selling furniture fittings, you can find plugs in the tone of the panel. Here under the feet of the plug and you can pick up the diameter of the drill: so that it becomes tight.

Before mounting on the back surface, the adhesive composition is applied, then further sits on fasteners. If the apron turns out from one wall to another - there are no problems, but if there are angles, they need to somehow separate them. To do this, you can use plastic or aluminum corners - depends on the style of kitchen furniture (furniture stores).

If we talk about color solutions, that is, the monophonic variants of different colors, a fairly wide selection of surfaces imitating different varieties of wood, there is an imitation of stone surfaces. There are also exclusive drawings, such as photo printing, colors, etc.

The drawing on the MDF plate is glued. This is a film with photo printing. Since the film should have a high density, such panels are decent.

From plastic

Aprons of plastic are good because it is inexpensive, mounted simply. In this case, the plastic surface is well wash. For the production of aprons, plastic ABS (ABS) is used. It is neutral to fats, acids, alkalis, but poorly reacts to contact with alcohol. Therefore, it is impossible to wipe alcohol and alcohol-containing compositions. Physical properties - hard, durable and at the same time plastic - make it possible to produce household appliances housing from it. Even some details in the car are made from such plastic. Because the aprons into the kitchen is only part of its use.

The temperature range at which such a plastic apron can be operated - from -40 ° C, to + 90 ° C. His only drawback - he reacts poorly to ultraviolet. Therefore, to put it in the kitchens, in which the work wall is illuminated from the window undesirable.

The choice of colors is wide, and a relatively low price and simplicity of installation allow you to change the finish, if it is very tired. Any image is applied on plastic, then it is covered with a double layer of varnish, which protects the drawing and prevents the appearance of scratches. If you have to try, of course, it is possible to scratch it, but accidentally rod - it is unlikely. In general, a good option. If we talk about the price, then the wall panel of plastic, which is used as a kitchen apron, costs from 1.5 to 6 thousand rubles. Panel width 60-80 cm, length 2-3 m. Some examples of plastic aprons are in the photo gallery.

Traditional Subject - Coffee Grains

Mounted wall panels on a relatively smooth surface. The glue type "Liquid nails" is shown and plastic is fixed on it. Its density allows you to hide minor surface defects.

From stone and metal

Less often found aprons for a kitchen of stone. First, they are expensive, secondly, to take a raid from them is not easy: the surface is even very well processed, has open pores, which are clogged inevitable in the kitchen fat and soot.

Apron to the kitchen of stone. Looks at some interiors perfectly .... But clean hard

Exceptions - Stone-based products, in particular - porcelain stoneware. Its surface can be very smooth. But there is another moment: a big weight of such a finish. Accordingly, complex installation and a powerful fastening system.

Design the work wall in the kitchen and metal, but it is a very caustic phenomenon. Such an apron will fit into minimalism and in high-tech, and then you need to try so that the room does not look like a piece of meat cutting ...

As you can see, it is possible to separate the work wall with different materials. There are options for different taste and wallet. The main thing is to choose the apron for the kitchen so that the headset and the rest of the furniture have become a single ensemble. Then the kitchen will be cozy.