Stand for watch with your own hands. Stand for wrist watches How to make a stand under the watch wat

Dear clock is not only a functional accessory or a wonderful decoration. This is also an attribute of a successful person, an indicator of its financial consistency. Naturally, such an item needs special care. This applies primarily to choosing a watches storage space.

How and where to store correctly?

For expensive, rare models or copies representing jewelry value, today there are many of the most different storage devices.

Caskets

The most common option. Wooden, metal, plastic, stone casket is probably in every home. There are jewelry or valuable things. There can be stored and chronometers.

Timmers and Vindergings

These are also peculiar boxes for storing hours with an auto-winding. Such a storage will greatly save the accessory from entering it moisture, dust, mechanical damage. In addition, this device is a special rotating bowl, whose oscillations very accurately imitate the movements of the hand of a running person. Timemoles usually have a glass door through which you can observe the pendulum vibrations of the chronometer.

The clocks in such a device are always ready for work and have a practically maximum charge. A constant movement is necessary for mechanical models, otherwise their mechanism ceases to function normally.

Safe and Safe Bag for Transportation

An ideal place to store high-value copies, whose cost or aesthetic value does not allow them to store them outdoors. Outwardly, they have nothing to do with the familiar bulky codes. They resemble, rather, unusual details of the interior, so noticing their uninitiated visitor to the room is not so simple.

Such safes are equipped with code locks, special sensors that allow "memorizing" fingerprints, GPS system, auto-shock and other functions.

For storage of chronometers, you can choose less exotic options. The main thing is to follow simple recommendations:

• it is impossible to store accessories with a quartz mechanism next to the sources of electromagnetic waves. It can be a mobile phone, radio, a radio or another subject;
• take care of the watch from moisture, dust, mechanical damage (scratches, shocks). This will greatly extend their service life;
• it is recommended to choose a permanent place to store the chronometer. It can be a special stand for outdoor hours, a small box, a rack, holder or a miniature hanger. Accessory must always be at hand.

For storage, you can purchase special boxes or safes with multiple compartments. Common storage will not hurt the clock mechanism, especially since a special compartment is provided in the box in the box.

Holders

Today they are presented in a huge assortment and allow you to perform 2 functions at once: the storage locations of the accessory and the interior decor element.

• Poropolone pads, covered with atlas, silk or other beautiful cloth. Allow carefully and beautifully place the clock so that they remain all the time before our eyes.
• Multi-level velvet rollers. Such a product is used for storing and displaying jewelry, bracelets, chains and hours.

• Vertical stand. This option is most often used in stores. Combined with a soft highlight of the watch looks as impressive as possible.
• Stand in the form of a tablet. Such a product has a soft base and rubberized substrate.
• Holders in the form of all kinds of figures. Interior little things that allow you to beautifully place the clock and take them at any convenient moment.

In what position to store mechanical clock?

Copies with moving details or high-value models are best stored in special cases that are attached by manufacturing companies along with the purchase. As a rule, they are already equipped with everything necessary for reliable and safe storage.

Caring for the bracelet

The leather or metal bracelet needs periodic cleaning so that the watch will save their original gloss and beauty for a long time.

Metal bracelet unpretentious in care. Sometimes it is enough to clean the links with soapy water with the old toothbrush.

One of the methods of cleaning the metal bracelet is shown in this video.

The skin requires more delicate and subtle care. Horsiciki with a leather bracelet should be stored away from the water, and when you get droplets of moisture - it's immediately to wipe dry.

It is not recommended to leave such a watch under the open sunshine. The skin dries, cracks, changes the intensity of the color. Cleaning such a bracelet should be cleared with special tools that can be purchased at the store immediately along with the clock or give them to professional cleaning in the workshop.

On such an organizer, it is convenient to store beads, pendants, chains.

You will need:

4 cork skulls;

Stencils, paint and sponge or brush;

Pins, carnations or hooks;

Fastening to the wall.

Sequence of work:

1. Using stencils and paints, apply a pattern on the plank.

2. Wait for the paint drying and stick into the shocks pins, carnations or screw the hooks. It will remain fixing organizers on the wall and raise decorations.

Photo and Source: katelynbrooke.com

2. Organizer-box for watches and bracelets

A good way to organize bracelets and clocks and store them, not allowing the falling of light and dust.

You will need:

Several bushings from cotton towels;

Beautiful napkins (for example, for decoupage), packaging paper or wallpaper residues;

Scissors;

Box with a suitable size.

Sequence of work:

1. Clean the sleeve from the residual towels, lubricate the glue and plunder with napkins or paper, wrapping the ends of the paper inside the bushings.

2. Place the resulting holders in the box. Ready!

Photo and Source: OnceuponHerdream.blogspot.com

3. Organizer from door handles

Very original and comfortable model - the door handles of different masters are as holders!

You will need:

Plate or plywood;

Tissue tissue;

Rope for fastening the fabric (you can also stick the fabric or use the furniture stapler);

A variety of door handles (it is best to go to the furniture store and buy 1-2 pieces of different sizes and forms);

Sequence of work:

1. Distribute knobs. Make the places of their attachment and drill holes.

2. Cover the touch with a cloth, securing it in a convenient way for you. Then secure the handle on the skid. Ready!

Photo and source: lizmariegalvanblog.blogspot.com

4. Organizer from trays for instruments

Such trays are usually put into the kitchen box to store cutlery in them. However, with their help, you can make comfortable shelves-organizers for storing jewelry and trifles.

You will need:

2 or 3 tray for devices (in this case, wooden);

Paint spray;

Paper for decoration and glue;

Sticking hooks;

Fastening on the wall.

Sequence of work:

1. Color paint trays from a canister. Some parts of future organizers can be saved with paper with a pattern.

2. Wait for the glue and paint drying and attach the hooks. It will remain to attach organizers to the wall.

Photos and Source: Tatertotsandjello.com

5. "Jewelry Tree"

Not just a stand for jewelry, but an art object! And done in minutes.

You will need:

Some dry branches;

If desired, paint.

Sequence of work:

1. Clean the branches from the bark and (if you want) cover the paint.

2. When the paint dries, put branches in the vase and drag the decorations.

Photo and Source: MySocalledcraftylife.com

6. Lace Organizer

Because of copper accessories and specially aged lace, this organizer looks like a thing found in a grandmother's chest or found on a flea market. Store it is convenient to keep everything that has hooks: earrings, brooches, badges.

You will need:

Strip of wide x / b lace;

A pair of copper metal holders;

A piece of cardboard;

A pair of tea bags for coloring lace.

Sequence of work:

1. If you want to generate white lace, plunge it into the tea infusion. Then - rinse and dry.

2. Cut on a piece of cardboard width equal to the width of the holders, and glue to the lace, as shown in the photo.

3. Tie a lace into the ring, grind it through the holder and secure the holder on the lace strip.

4. The second holder make the lower edge of the organizer. Will hang it on the wall - and ready.

Photo and Source: forthemakers.com

7. Organizer-hanger "Ombre"

The hanger for beads and chains is also obtained, and the shelf for the trifles, and the original object of the interior decor.

You will need:

A rectangular cross section for the base of the shelf;

A stick for hooks and a logsik to cut them;

Sandpaper;

Durable glue;

Paint (shelf color, color for hooks + white);

Brush or sponge + tanks for mixing paints.

Sequence of work:

1. Prepare pieces of sticks for hooks: scold them, stick edges.

The "Amur Ukrainian" workshop began work on creating a special shelf under the vintage clock!
The customer was chosen by the material, and the drawing of the thread - "grape vine". We made a shelf model.
Now it is necessary to prepare the material for the manufacture of the shelf.

March 10, 2016.

The workshop is working on creating a carved shelf under the clock.
What was done:

• Selected lumber - nut.
• The sawn timber is cut on the boards, then on the rail.
• Clear shields for the shelf.

In order for the shelf to be smooth, it was not twisted - did not learn, we cut the boards on the rake of the required size. Then we slaughter on the shields, of which we will do the shelf.
We put the shields, calibrate through the flight.

Here are our cooked shields for a shelf under the vintage watch! Now all this needs to open correctly, cut off. Make milling.

March 14, 2016.

Our workshop continues work on the creation of a shelf for ancient clock. The carved pattern was chosen grape.
Made a plywood pattern for the side elements of a carved shelf.
He saw out of panels on the template side elements.
Prepared everything for a thread - a shield for a grape pattern, a sidewalls with grape leaves.
Milling carving of the grape pattern is performed.

For convenience, a plywood pattern of the sideways is made:

Heavy elements saw out of shields:

The sidewalls for the shelf and the shield for the grape pattern:

Now we have a carving of side elements shelves:

Today the milling thread on the shelf is completed. Now it is necessary to refine the thread of the pattern manually.

Today the regiment was collected (while "raw" assembly - without thread and trimming).

The image of the shelf has already been signed, the angle of the shelf is too direct, while the smooth line has been outlined, which will be smoothed the angles:

March 15, 2016.

We continue to work on the shelf for watches. At the moment there is a carving of the shelf side elements.

March 16, 2016.

Work under the shelf continues.
The side sides of the shelf are cut. There is a thread with a grape pattern for a shelf.

Thread second sidewalls:

Figure cutting of the corners shelves:

Here is such a shelf. Now the carving of the grape pattern on the shelf by cutters:

March 17, 2016.

Work on our shelf is coming.
The pattern of the grape vine with leaves for the shelter is cut.
Side carved shelf elements are polished.

The sidewalls are ground. Now we cut a grape slom leaf behind the leaves:

March 18, 2016.

Work on the shelf goes in planned mode.
The central grape vine was carved and ground.
Dorred side elements shelves.
The carved elements of the shelves are drawn and drank - grapes.

March 19, 2016.

We are pleased to announce that work on the creation of a wooden carved shelf for clock completed!

We doried the elements of the shelf (grapes), polished and painted.
Spinned the shelf itself, polished and painted.

Carved carved decorating element grapes. Sitting it on wooden wades, with a ball at the end. We cut and grapes, and the sewers by hand with cutters:

Here is our finished wooden shelf:

Krasch shelf, at the request of the customers, in a dark color. Cut the loop on the shelf:

Here is our next creative project!
We are glad that you went to our creative workshop and watched the entire workflow.
Come to us again, we will be happy to share new news!
If you have any questions, we will answer the pages of our site!

March 21, 2016.

Today we sent a shelf to a new place of residence).
How to assemble the shelf, we publish right there.
We hope that our shelf for vintage clock will serve as longer as possible!

In order to collect our shelf only a screwdriver.

We screw the screws that the tips of mm 3 were performed on the back side of the sidewalls.

We position into the end of the shelves, we fall into the holes with the tips of the screws and screw. Shutters of screws Close our wonderful bulbs, which would be good to put on PVA glue. A drop of a drop of glue into the holes (where the screw was jarred) and put the cap.

Shelf is ready for service!

Our workshop thanks their customers for their choice! We are glad to cooperate with everyone!
Come to our creative workshop in our creative workshop, let's crash something!

The material for the stand was chosen metal (can also be made of wood or plastic). Just to the case, the aluminum panel from the musical instrument turned up. In the aluminum plate initially been drilled holes for screws and speakers, which greatly facilitated further work. It remains only to correctly place the fergments of the stand and cut the aluminum plate by labels. Armed with hand-hacksaw for metal, I began to work.

We place the dehthilic (pointed metal rod) fragments of the future cut.

By marking, we cut the stand fragments.

The sawn fragments subsequently had to be customized with a file, as the sizes and radii of the two halves were not identical to each other. Two halves were combined and bonded with screws for ease of processing with a file. In order not to damage your hands when processing metal parts, the details should be fixed in vice or use the locksmith pliers. After fitting the sizes, burrs and chamfer were removed, as well as to legend aesthetics of the metal design, the angles are rounded. Two hexed through racks were used to fasten each other (used for fastening the printed circuit boards to the electrical equipment) and the screws with a secret hat. The hexagon racks had to be trimmed on the width of the clusters of the clock so that they would be on the stand in a steady position.

Exactly we combine two blanks in relation to each other and fix the screws with each other. Then you fix two halves in the vice and process the file.

After bringing the blanks for the desired state, we collect a stand (in the future, the conventional screws were replaced by the screws with a secret head).

After the assembly of all parts, it was possible and stopped, but it seemed to me that the clock had an unfinished look. Dial and framing overlay of black clocks is not entirely well combined with golden aluminum spraying. To solve this "Combination", you can resort to staining or close completely holes and hats bolts overlaps. At home there were trimming of dense dermatitin of black. The contour of the support for the flap of dermatina, two overlays on the stand were cut out. With the help of two-sided adhesion, cut-out lining was pasted on the surface of the stand. If you do not quite clearly imagine how the stand will look with overlays, I advise you to do this, to use bilateral scotch, if you are satisfied with the result, you can safely use glue.

We carry the contour of the stand on the reverse side of the dermatina and cut the lining along the circled line.

After the clock took its place on the stand, the aviation clock began to resemble the fireplace becoming more attractive. The work done can be divided into two stages: manufacture and decoration. The manufacture of the desired stand under its needs can be entrusted to your husband or son, and decorating leave his wife and daughter. When working together, creative thinking and skill do something with their own hands. After all, there are cases when not everything can be bought in the store, and you can make yourself almost anything! The main thing is to connect fantasy and thoroughly think out!

About the author:

Welcome to you, dear readers! My name is Maxim. I am convinced that almost everything can be done at home with your own hands, I am sure that it is for everyone! In my free time I love to make something new for myself and your loved ones. You will learn about this and many other things in my articles!

Buying expensive hours, immediately need to take an additional accessory to them. Stand for wristwatches will be required for their proper storage.

Views

The holder retains the clock in integrity, allows them to make it easy to take the right shape and do not scratch. As a rule, they are divided into several types:

• casket has box shape. A lot of additions fits into it, and that the clock is not damaged, there is a separate compartment for them. There are caskets with an additional invisible compartment, in which you can easily hide the dear heart accessories;
• special hanger is attached to the base, And already on the handles themselves there are hours. It can be hung on the wall or just leave on the table. The use of hangers is universally and is suitable for storing not only wristwatches, but also bracelets, hairpins and jewelry;
• stand - Strengtheningwhich is located only on the table. It consists of rounded elongated bars and can easily accommodate a whole collection of chronometers. As a rule, the rack is covered with velvet - it allows you to fix accessories and maintain their integrity. But bars are recommended to additionally sneak so that they do not fall from the holder;
• multi-tier stand It has various forms: round, square, elongated or arcuate. Each tier is located just above the other and has its own functions. On the first, rings, earrings, minor brooches, on the second - suspension and necklaces, and on the third - the clock is placed;
• sculptural holder It is a decorative addition with diverse functions. Maybe in the form of a statue, buildings or glass shape of a glade. There are special handles or recesses where you can hang or lay the clock.

Color decoration

The holders are made of glass and metal, which is why the shades are neutral and calm, for example, gray, black and white. Owners of the clock prefer precisely glass holders and forms without unnecessary parts - they are easily fit into any interior and design of the room. When choosing a stand you need to pay attention to:

• color. He must match the interior. For the style of Provence, cream shades are suitable, slightly aged design. But if the design of the room is decorated in the style of modern or high-tech, it is better to purchase glass holders without unnecessary additions;
• the form. Maybe any - from round to abstract. Square table and suspended copies are considered the most resistant;
• supplements - Pens, fasteners, accessories. They are required for storing jewelry and watches. The stand is considered ideal if there are replaceable parts, then they can be easily replaced;
• material. The choice is large enough - glass, metal, wood, plastic. In terms of quality and durability, wood and metal are considered the best.

How to make it yourself

For any clock, even with the auto-shift you can make a stand alone. To do this, you need a little inspiration, a set of tools and a desire to create.

From wood

Refers to the decorative type of holders and decorate any interior. Required:

• tree twigs of different lengths (moderate hardness and elasticity);
• varnish;
• small brush;
• fastening quick-drying glue;
• wire;
• sandpaper;
• knife;
• several hooks (We will need to secure the holder on the wall).

• At the first stage it is necessary to prepare wooden branches - Clear them from the bark with a knife, treat the upper layer of sandpaper to give softness and homogeneity. After that, you need to give them to dry.

• The second stage is to form a skeleton The future stand: on the base (it should be direct, without irregularities) should be attached to the twigs at a distance from 3 to 5 cm from each other. In their places of clutch, you need to apply glue and firmly press each item. It is better to use clothespins. Waiting time for drying - 3 hours.

• In the third stage, varnish treatment is necessary - Brush to cry through the entire surface of the decorative holder in several layers and let dry.

• The last stage is the fastening of the vehicle branches. (Tights in several base layers) and adding hooks for the suspension on the wall.

Such a holder will not only delight the eye and make the room more cozy, but will withstand watch, hairpins, bracelets and broots.

In the style of "retro"

If several bottles were lying in the house, a wooden box or there is a large number of old unnecessary things, they can easily be used to create decorative masterpieces. Materials can be recycled and create space in a romantic, olive, bohemian or even Scandinavian style. What is necessary:

• two small glass bottles;
• wooden box (should be a third of being above the bottles);
• varnish;
• glue;
• black paint.;
• brush;
• hooks or loops To secure the shelf on the wall.

Box need to be processedClear garbage . After re-organize with patterns or special designations on the outside. For this, black paint is used and a small brush. Cover her varnish And leave to dry for 2-3 hours. On the one hand, to make two holes - the rope will be done through them. Next to put on glue bottles into the inside. It is advisable to have them close to each other so that free space remains. While the glue dries, you can arrange a beautiful holder on the wall.