Homemade visks from girlfriend. Production of homemade plumbing vice visks from a chapellery

Hello everyone! Each carpenter should have at hand tools for durable consolidation of its billet or part. Wooden vertical vice are perfect for this purpose. Look at my version of the vice data that I made do it yourself From plywood and metal.

For this project, I used all the tools available from me (ranging from the nailing machine and ending with the welding machine). Therefore, I do not bring a complete list of tools used. Use those tools that you have. Be inventive!

Step 1: Materials used

At first I cut Phaneur by the desired size. One billet was 2 cm thick, and the second 3 cm.
After that, I cut off two strips of oak 1 cm thick. They should be glued and killed to the upper edge of the sponges, providing them with stability and the best appearance. Then do trough the flush and sand.

2 cm blank from plywood I attached to the table with a pair of furniture bolts.

Step 2: Device Mechanism

Let us turn to the mechanism itself.

In a local metal store, I purchased a metal rod with a diameter of 2 cm and a rod with a thread M 27, as well as a pair of washers and nuts. In addition, I purchased a flat billet with a thickness of 4 mm and a 6 cm wide. These are all metal components that we need.

Take wooden oak bars and use them as guides. For a carving rod, I welded two nuts to a flat billet and attached it under the table with screws (see photo).

On the outer sponge, I decided to add a flat blank, which I mentioned earlier. This will provide additional stability for the entire design.

It is very important that all elements are located on the same line, otherwise the vice will not work.

I also welded the puck to the rod with a carvings. This is necessary so that the outer sponge is also moved by turning the rod. Without this, the sponge will remain in place, and move only manually.

Step 3: Processing on the lathe

For the rotating head, I glued several billets from cherry and oak. Then the required shape came on the lathe. The result obtained turned out to be quite acceptable. Next, with the help of the bit, I made a deepening under the nut. On the drilling machine, I drilled a hole with a diameter of 2 cm for the handle. The hole turned out a bit at an angle ...

The handle is a pin of a fir with plugs at the ends of the cherries that prevent the drawing handle. Treat the handle of the Olife.

Also on the outer sponge, I drilled holes with a depth of 3 cm for stops on a joinery. That is why I used for the outer sponge Phaneur thickness 3 cm. But a single row of stops on the joinery workbench will not benefit, so we still need to add other holes on this table. I will do it when I approach the final stage. I just have to take into account the mechanical part below.

Step 4: Ending

You can make a vice with your own hands from girlfriend. For this, screws with a thread of 20 mm and a length of 150 mm are used. They can be removed from the sports corner. The carving of such screws is designed for significant loads.

Homemade carpentry vice can be made of sweater materials.

Constructive features

Joiner's vice with their own hands is recommended to be made using long screws. From this indicator depends the distance between the tool sponges. Studs are replaced by other fasteners. To secure the handle in the screw, it will be necessary to make a slot. If necessary, the hole is expanded with a file.

Homemade tool must be equipped with a screw with a ring.The stationary sponge is made of the board. It is naked to the table. To make a moving part of the workbench, a 20 mm thick botboard will be required and a width of 18 mm. The length of the sponge should be 50 cm.

For the arrangement of the screw hole apply the first drill. It is recommended to adjust it to the diameter of 21 mm. To make a hole for the hairpins, you will need a drill with a diameter of 10 mm. Screws and studs are inserted into the holes.

So that homemade vice treated short blanks, the hairpins are rearranged. There are 2 additional holes in the board. To work with long boards, a boring machine with long screws is made.

The use of pressed nuts

The joinery tool with a pressed nut is made of metal brackets. In order for the workpiece when the clips, the key does not break off the nut, it must be pressed. To do this, you will need to warm up the sponge of the key on the fire.

The joiner tool can be made from shock absorbers and nuts M18. In the corners of 1 elements make holes. To fix them with each other use bolts with a secret head. For independent manufacture of vice, you can use the following materials:

• metallic profile;
• hairpin;
• nuts;
• welding;
• corners.

Pre-from the profile cut 2 segments. The third strip is cut along an angle. From the long strip, the bottom is cut with magnetic corners. Billets are trying on and cleaned to ensure a good clutch with a welding machine. Support for vice is aligned with magnetic corners. The next stage provides for the welding of the last elements and supports. To give the tool with great strength, metal strips are used.

Additional work

Diagram of the device of joineric vice.

Then the front lip of the vice is welded to the guide. Previously have a cut down. The next stage is the manufacture of bed. Metal tape welded to the last element. Its task includes restriction of the guide and holding the fastening element with carvings.

Nuts weld to the bed. Previously screwed the stud. The rod hole is shown and dried in the plate. The last detail is welded with welding. The cotton fastener is screwed to the bed. Nut screws on the 1st element.

The rod is inserted on the bed so that the hairpin passes through the hole. Two nut turns on top. The pipe is passed through it. Extra pieces of metal ribbon are cut off. The rear lip is welded to the workpiece and to the bed. If necessary, homemade tool paint. To do this, it will be necessary to clean them with the felt circle, the rod is lubricated with a special lubricant. Thish collect.

Conclusion on the topic

At home, you can make plumbing and carpentry vice. To make 2 tools, use water and gas pipes. It is necessary to choose pipes with different diameters. The product with a smaller diameter is inserted into a large analogue and fixed with electric welding.

The flange with the M18 nut is installed on the smaller product. The threaded stud is inserted into the small tube so that the pre-fixed nut rests on the flange with a large hole. Another fastener is screwed to the protruding end of the heel. For fixing the 1st element, a welding machine is used.

The end of the threaded stiletto is screwed into the pipe nut with a large diameter. The next step is to install on the vice of the presser and support plate. Sponges are made of a square tube, and the paws are from the corner.

For ease of use to the protruding end, the hairpin welds the nut. At the same time, the possibility of installing a metal bar is taken into account. Such technology will allow the axis to rotate, easily controlling the visits.

Homemade vice can have some negative characteristics:

• the simultaneous rotation of the inner pipe with the hairpin;
• the pipe must be in the appropriate position (this will require a fixer).

In the manufacture of homemade vysiets from 2 trimming in the form of squares, the technology described above should follow.

Things - one of the most important tools in any workshop. It allows you to expand the circle of work and improve efficiency: thanks to them the hands of the master are free, and the processing of parts is carried out at a high level, and without assistance. Few know that rather high-quality vice can be made with their own hands. It is only necessary to show the fraction of smeuffles, skills and attentiveness. Next, about the intricacies of the process of creating a tool.

Visits are widely used in construction work as the holding tool elements for different parts. The product under consideration is presented in the form of a base (body) with two clamping tubes, which allow you to hardly hold the item during the implementation of milling, planing or drilling.

Things are considered one of the main plumbing tools, because it is precisely the quality of their final processing that will depend on the strength of the details. In addition, such a product frees both hands, thus allowing certain processes as accurately as possible.

Depending on the operational features, visks are divided into two categories: carpentry and plumbing. The latter, in turn, are divided into swivel and static. Static plumbing vice are ring and parallel. The first does not have elements for constant mount and are more easily mounted / dismantled. The seconds are characterized by more overall dimensions and are attached to the working surface thoroughly.

Flooring vice is designed mainly to work with sufficiently soft materials: plastic, wood, etc. They have high clamping sponges that are either fixed static or rotated on the base.

Machine is designed to work with rigid materials, for example, metal. Clamping sponges are less high for greater convenience and performance.

Creating a tool at home

To make a vice with your own hands, you need to prepare a specific set of materials and tools:

• Metal plates;
• Pins;
• Boards;
• Metal rod with a diameter of about 2 mm;
• Fasteners.

You will need a minimum of the tools: an electric drill, a sledgehammer, a file and a hacksaw. With their own hands, it is easiest to make plumbing vice, so further a step-by-step instruction for creating exactly such a tool:

Council. Things made at home can be more efficient and convenient due to the fact that they are quite realistic to adapt to the implementation of any specific operations.

If you plan to make a vice with your own hands, some nuances should be taken into account, which will depend on the strength and duration of the operation of the tool:

• Material. Steel is most often used to create a product. It is advisable to choose high-quality, since this depends on the reliability and durability of the product, as well as its ability to hold the part in the process of processing.
• Product size. If work is planned mainly with small details, it is better to give preference to a compact model: it will be more convenient and easier to work with it.
• Thread step. An important point that many people are often missed. The thread must be clear and shallow if point work is planned.

• Sponge. It is important to pay attention to the size and form of this element. The first indicator depends on the type of products that will be processed, the second - from the materials of the working blanks. If only work is planned (mainly) with soft materials, it is better to make sponges flat.

Council. Since you make vice with your own hands, you can go beyond the standard model, making the optimal tool for your needs. Remember that with the help of an additional optional you can make vice more efficient in operation. For example, the presence of a rotary mechanism will allow working with small details.

So all the subtleties that should be aware of the creation of such a tool as a vice with your own hands. As you could make sure this process is quite simple, and the result of the work will please even an experienced master. Good luck!

How to make a vice with your own hands: video

Make comfortable and high-quality homemade vice is quite simple. Even easier than to do knitting. They may be needed in cases where it is necessary to secure the part or the product. An additional advantage of such vice is their low cost in manufacturing, since not every person can afford to purchase a serial model.

The factory models of vice are made universal, therefore it is not always possible to fix it completely any item. And also they have a greater mass and dimensions. Things collected by your own hands can be made most convenient to perform a certain type of work. This will help increase labor efficiency and reduce time spending.

Any master who constantly works in his workshop knows that it is hard to do without such a tool as good vice. Such a clamping device helps to perform different operations with wood products, plastic and metal. The use of vice can guarantee efficiency and good accuracy when performing various types of work. And also ensure human safety. When there is no possibility to buy a factory model of such a device, it is quite simple to do it yourself. This operation will leave little effort and time.

Homemade vice is made to divide such types:

1. Plumbing;
2. Carpentry.

Production of drilling machine

Necessary materials

Homemade vice for a drilling machine at home is pretty simple. They do not need complex calculations and design developments. In the network you can find a lot of high-quality drawings of plumbing vice. Very simple, but high-quality design is manufactured using iron pipes or chapellor.

For the assembly of plumbing vice with their own hands, such materials will be needed:

1. A small iron tube that will serve as an internal mobile part of the device;
2. The iron pipe is smaller, which will perform the role of an external fixed part;
3. Large nut size M16;
4. Large screw size M16;
5. Special knob through which rotation will be transmitted to the screw;
6. Two metal supports that will be fixed on the bed still part;
7. Two segments of a metal rectangular profile that will serve with sponges of vice;
8. Several locking nuts size M16.

Flooring vice

To collect such a homemade design, it is necessary to start with the fact that the edge of the metal pipe of a large size, which will be a fixed knot of the device, attach the flange with the help of a manual welding machine. In the center of the flange you need to weld the nut size M16. Next, to the end of the iron pipe of a smaller size, it is necessary to fight another flange and skip the chassis screw.

To the edge of the screw you need to fight another nut, which will be a locking element. The end of the screw to which the nut is fixed, you need to skip through the pipe of the small diameter, and then insert it into the end-to-end hole of the flange. It is worth remembering that the nut is obliged to be screwed to the flange from the inside.

On the chassis screw, which is located outside the flange, you need to wear a washer and screw the nut. Next, it is securely welded to the screw. One more washer should be installed between the surface of the metal flange and nut. This will help reduce the strength of friction between them. At this stage of work, it is necessary to be very attentive and prevent errors.

After assembling the moving node, the device you need to insert it into the metal pipe of the larger size and spin the other end of the screw to another flange. In order to attach the knob to the screw that speaks a little bit from a smaller pipe, it is worth a nut or fly to it. In its through hole and you need to skip the knob.

Good clamping sponges for worth making small rectangular pipes. They need to be fixed to fixed and moving parts of the device. So that the vice is much more stable, to the bottom of the stationary iron pipe, it is necessary to quickly welcome. Their role can perform rectangular pipes and pieces of corners.

The small size pipe when rotating the running screw is also capable of turning. This makes the use of such a design very problematic. To avoid this, on top of a fixed tube, it is worth doing a small slot, and to twist the retainer in the movable part. This screw must move into the slots, not allowing the rotation of the small pipe.

Joiner's tool

Many people often have to handle wooden parts. This processing is usually associated with the assembly of different structures from the tree or their repair. Making such work, applying factory devices with iron clamping sponges, very uncomfortable. And it may also damage the wooden product, cracks or dents. For this reason, for details of the tree it is better to use homemade vice. To collect them, you will not need a lot of time and strength.

To collect carpentry vice with your own hands, you need to find such materials:

The bed of such a cross structure, on which the guides from the metal are fixed, is fixed on the working surface of the vertical table with bolts or screws. In the movable sponge of vice and in the case you need. They are necessary for the screw and two metal guides. These through holes should be drilled simultaneously in both bars so that they are at one level relative to each other.

Next, the guides are fixed in the machine of the machine, and they dresses a movable sponge. In the central end-to-end hole of two angular bars, it is necessary to insert the chassis screw, to which the nut is screwed from the back of the housing. On the other end of the screw that goes beyond the front of the movable part, you also need to screw and welcome the lock nut. To attach the knob to the screw, it is worth drilled in it through a hole of the same diameter. Next, another nut is welded to the gate.

Work such joiner mini-vice is very simple. Rotating, the chassis screw is tightened into a metal nut, which is welded to the back of the product body. Thus, the movable sponge is attracted to the fixed part. Their principle of action is very similar to the jack.

If several times a day have to change your workplace, you can equip each of them by personal homemade, made by their own visits. Their design, as well as all ingenious lies on the surface and is simple, it is very effective as much of what the famous homemade master V. Ilostyev offers.

Any self-respected homemade is vice. However, this full-fledged tool today is not only roads, good vice are still cumbersome and heavy. My workshop is actually the entire plot: you have to work in different places, and visks are needed very often. It turns out that you need to drag each time a heavy tool or run there and here to handle parts.

Vice \u003d two pipes

It is known that gas and water pipes are produced with such a calculation that any pipe necessarily fits inside the pipe of the next sizzy. Considering this, I decided to take two trimming of pipes of two adjacent sizes. In the larger pipe inserted and with the help of electric welding attached to one of the ends

flange with a large diameter nut - M16. At a smaller pipe, with the help of the same electric welding, installed a similar flange with a nut, but more than -M18. The M16 threaded stud in such a hole must be calmly rotated.

It is to this hairpin at a short distance from the end set a nut, which reliably fixed with the help of electric welding. After that, inserted a threaded hairpin into the cavity of a small pipe so that the fixed nut was inside the pipe and rested in the flange with a large opening. On the protruding end of the hairpin screwed another nut and also fixed the welding. Between the flange and nuts, the intermediate washers of sliding pre-installed. Now the end of the threaded stud sticking out of the tube is screwed into the big pipe nut. It turned out the main working element of vice. It remained only to install clamping plates (sponges) and support plates (paws) on vice. I made a sponge from a square tube, paws - from the corner. And vice ready!

For the convenience of servicing to the protruding end of the threaded stud, a nut with such a calculation was welded so that, inserting any rod in it, it was easy to rotate the axis and control the vise.

Homemade vice have shortcomings

When working on such visits, the inner tube can rotate behind the hairpin, but it does not scare me at all. You just need to hold this pipe in the desired position when fixing. Yes, and this deficiency is easy to eliminate - it is enough to install the retainer.

It is even easier to make visks from two trimming of close-size square pipes. All technology remains the same.

Tisted with your own hands - Photo

DIY DIY: Drawing

1 PC. A3-A5 LED Glow Drawing Chalkboard for drawing graffiti ...

202.24 rub.

Free shipping

★★ ★★ ★★ ★★ ★★ (4.20) | Orders (114)

A3 A4 A5 LED Glow Drawing Chalkboard for drawing graffiti ...