How to make bulk stickers at home. How to make a vinyl sticker with your own hands. Making sticker with your own hands

Vinyl stickers are sold in abundance, but most of them are standard, and ordering a small inscription in profile firms, it will cost much more expensive than to buy the starting material and make the semblance of graffiti from Vinyl himself. Meanwhile, the sticker is not just an element of decor, it will help to hide small chips or scratches on the surface, and it doesn't matter what it is: a car, smartphone or PC. The phased process of creating a vinyl sticker with their own hands is given later.

Materials

To work, you will need:

sheets of color vinyl on adhesive basis;
stationery knife;
paper for the printer and the printer itself;
notebook;
adhesive tape;
durable cutting surface;
tweezers;
malyary Scotch;
alcohol;
watu.

Step 1. In any of the graphic programs, handle the image you like or create it from scratch if you have appropriate skills. Print the prepared picture or inscription and cut the excess part of the sheet for convenience in further work.

Step 2.. On the working surface, which you will not mind will spoil, secure the painted scotch of the vinyl sheet. If you do not have suitable tables, take a solid board. Since in this case the inscription in the graffiti style is two-color, the sheets of vinyl two colors will be used. The first golden piece of the source material will be fixed, which is presented in the picture with a color part.

Step 3.. On top of the sheet of vinyl, the same painting tape should be consolidated with a carved inscription.

Step 4.. Take a sharp stationery knife and, pressing on it, cut out the inner color part of the inscription.

Step 5.. Remove sheet of paper. Cut a piece of vinyl with an already translated part of the picture.

Step 6.. Neatly tweezers remove parts of the vinyl, around the inscription. Do not touch it yet.

Step 7.. Similar work Do it with a sheet of vinyl black. Apply a printout with an already cut middle. Spend the knife by its internal circuits, and then pass through the outside edge of the pattern.

Step 8.. If you are all done correctly, you will have the inscription and the shadow that gives it the volume.

Step 9.. To gently and accurately glue the two parts of the inscription, use the adhesive tape. It makes it right on top of the harvested picture.

Step 10.. Alcohol and cotton wipe the surface to which you will stick the vinyl sticker.

Step 11.. Initially, glue the inner, color part of the inscription and remove the strip of the tape, and then fasten the shadow on the surface cut out of the black vinyl. Scotch also delete.

Hi friends! When was the last time you put order on your workplace? Documents, tools and other things unfolded on the shelves. Of course, you can decompose once and remember these places, but it is better to sign them. It will be more strictly maintaining the order of things in its places. But how to sign them? Today we will analyze different preparations of stickers or stickers based on paper.

So, for the manufacture of the simplest sticker option, we need a paper printer and glue. Of course, the sticker can be painted or writing manually, but as they say, I am an artist from the word "Lyubo", so in all the workouts I prefer to use computer equipment. In any editor accessible to you, we make an inscription with or without a picture.

How to make a sticker with your own hands

Print on the printer, cut out and glue to the right place. That's all. But this method has its own minuses. This is a short-life sticker. She can get lost, break. If it was printed on a jet printer, then the paint can grow from the random ingress of moisture.

I have a little improved this way, adding a little tape to the sticker, of course, the stationery. Scotch allows you to protect the sticker from all the above flaws.

Scotch utilization technology for stickers is simple. You need the front side of the sticker gently apply to the adhesive side of the Scotch, so that it remains for several millimeters of the free sector of the tape. If the sticker is small, then cut extra tape. Next, turn the sticker and apply it to the right place. Gently smoothing the tape at the edges. Making such stickers does not require the use of glue. And externally, it will look like laminated. This method also has its drawback. This limited size of the scotch width stickers, as a rule, is 5 cm, but it was enough for me. For making larger stickers, you must use self-adhesive paper for the printer. Print the desired text or picture, cut and glue. Only here for such paper will need to fork out, and even all the shortcomings of the usual paper are inherent. Do you need it?

Specially for readers of the blog "Your computer" are designed sets of stickers on canning banks. The kit consists of 4 sheets of 15 non-ferrous stickers of different topics: "Jam", "jam", "compote", "pickles". Print them on a color printer and with the help of a tape shove on banks.

Download pDF stickers set On canning banks. Successful canning.

Yes, I almost forgot. On the Internet, I met another way of making tape-based stickers. Only for its implementation, you must print an inscription or a picture on a laser printer. For this method is not suitable. Everything is done, as I described above, only before sticking the paper base is swollen in water and is neatly washed off. The image remains on scotch. The advantage of this method is that the transparent sticker background is obtained. Here are such ways you canmake a sticker do it yourself. Choose!

Dear reader! You looked at the article to the end.
Did you get the answer to your question? Write in the comments a few words.
If the answer was not found, specify what was looking for.

Bilateral scotch is incredibly convenient, practical, relatively inexpensive. It is used for many types of needlework, including to create stickers with their own hands. The reasons why people need to make stickers without double-sided adhesive, are the most different. We will not stop at them, but we will immediately turn to the instructions.

3 ways with ordinary one-sided scotch

If there is no possibility to use bilateral scotch, it will come true.

Fashion first

We take a wide ribbon and placing it on top of the front side of the sticker. Next, cut off the excess scissors, leaving a little along the edges, copying the pattern contours. Due to the protruding scotch, the sticker is attached to the surfaces.

Improved method

We glue the first billet to another piece of one-sided adhesive (to the neline side). Thus, it turns out a sticker with a completely adhesive reverse side.

Third way

Cut from the tape a rectangular piece.
We fold it with a tube and straighten so that the adhesive layer turned out to be from the outside.
One side of glue tape to the sticker, straighten.
It turned out a homemade bilateral version of adhesive tape.

Glue

On ordinary PVA glue, pencil and other stationery can be glued one-way tape for the picture. Just cover the entire root side of the sticker and place it on the glossy side. It remains to trim the sticker along the contour.

Council
The method with glue works better on a painting ribbon: it will also well stick to different surfaces, but thanks to a paper-based, the sticker will be kept stronger.

Another way with glue

This time without scotch: just cover the reverse side of the drawing and wait for drying. When it comes time to stick the craft, we wact a little, and the sticky layer "comes to life." And even easier immediately after applying glue, put the drawing in the right place.

All these ways are inexpensive and comfortable, but with double-sided adhesive tape this work will be even more pleasant and faster.

How to make a sticker?

Many people have been popular among children and teenagers various stickers. Now they have become less popular, nevertheless, there are many lovers who collect stickers, stickers and other pleasant little things. Next, we will look at how you can make a sticker with your own hands at home.

How to make a sticker

In order to make a sticker at home, you first need a printer printer, several sheets of paper, scissors, tape and water container.

First, find a suitable image that serves to create stickers.
Print it on a piece of paper in such a size so that it is no more area of \u200b\u200bthe scotch strip.
Cut a small strip of scotch and attach it to the sticker.
Follow the scotch and make sure that the strip does not remain non-flimsy sites and the bands.
Next you need to cut the workpiece.
Fill a small container water temperature. Lower the workpiece into it and attach the subject from above in order to press the workpiece to the bottom of the container.
Wait 10-15 minutes.
Get the workpiece and neat movements remove the paper from the film. It is not necessary to put pressure on paper too much, as it has already spacked, so it will be easy to lag behind the stickers.
Clean the paper sticker completely and leave to dry for 15 minutes.

The sticker is ready, and it can be glued to the refrigerator, a closet, or any other smooth surface. Now consider another way to create stickers.

Making sticker with your own hands

The sticker is, in fact, the same sticker, but more complicated in the manufacture, while the capable of producing a strong impression.

To create a sticker, you also need as in the previous case, to start finding a suitable image. In addition, you will need to use a special program, for example, CorelDRAW to make an image in vector. You can do it yourself or contact the printing company that will create you image layout. Next, it will be possible to start directly to the manufacture of the sticker.

Make stickers yourself not such and complex task. How to make stickers with your own hands tell in this article.

It takes quite a bit of materials and the original sticker is ready for use.

There are different options for making stickers.

Print on special paper

Finished self-adhesive paper in the stationery stores. It is well suited for any type of printers.

Such paper may have a one-piece self-adhesive sheet, and can be divided into sections. In this case, you need to accurately determine the size of the pattern or inscription, and also correctly arrange them in a text or graphic editor, so that when printing the image does not impose on the next area.

Also, if there are abilities for drawing, you can make a drawing with an unexplored marker.

Making stickers using tape

It will not suit the inkjet printer, you will need to use laser.

Materials will need paper, tape suitable size and hairdryer. Choose a suitable image and print it on ordinary paper. Scotch is glued over the picture and gently smoothes. Cut the picture, leaving the allowance. Fill the container with warm water and immerse the picture together with scotch for a few minutes. After that, place the sticker under the warm flowing water and gently remove the wet paper.

After all paper is deleted, an imprint of the picture will remain on the scotch. After that, the sticker should be dried. The dry tape has adhesive properties.

The finished sticker is cut to the desired format.

Production of stickers with double-sided adhesive and baking paper

For such stickers you will need: printed, drawn or carved picture, double-sided tape, baking paper. On the root side, the stickers glue bilateral tape. Then the second protective layer is removed from the tape, and the sticker is glued on baking paper. The properties of this paper are such that the tape holds on it tightly, and at the same time it is easily removed without damaging the paper itself.

After the sticker is cut to the desired form. Such stickers are easy to store without worrying about the fact that the adhesive layer will deteriorate or dust.

In specialized stores you can purchase a special vinyl film. The drawing is applied to this film and cuts out over contours.

Such a film also has a self-adhesive layer.

Making stickers with gelatin glue

Weish bag boil with 4 tablespoons of water and a teaspoon of sugar.

The mixture should be homogeneous. The resulting composition is slightly cool and pour into a capacitance with a lid. Good suitable small jar from under baby food. At night glue leave in the refrigerator. When the glue is needed, the jar must be put into the container with warm water and wait for its ignition. Apply glue with a brush.

The stickers made by their hands are characterized by their own style. You can choose any plot and suitable size. In addition, it is a significant budget savings.