Command Block 152. How to give yourself a command block in the game "Minecraft"

The same teams as in the usual chat. What is the command block, how to get it and how to use? In this article we will tell you about him!

This is really a very useful block and it expands the possibility of creating cards in Minecraft

You can find a complete list of commands on, but not all of them work in Minecraft on Android, iOS and Windows 10 versions.

+ Command Blocks in MCPE:

Unlike the PC version, in PE, command blocks do not make long loads, i.e. FPS will be stable.
The command block interface is adapted for mobile devices.

- Command Blocks in MCPE:

Too small functionality.

How to get a command block?
In the game, it is impossible to get a command block by crafting, but it can be issued using the command / Give Steve Command_Blockwhere Steve. The player's nickname to whom the team will give this block. Instead of STEVE, you can also use @p, i.e. you give the block to yourself. Do not forget to enable cheats in the settings of the world.

How to enter the command to the command block?
To do this, open its interface. It is done very easily, just tap it. In field Enter team The comja herself fits, which will execute the command unit. Low below is a field in which you can see a mistake if you have entered something wrong.

Examples of teams:

give @P Apple 5 - gives the player five apples.
setblock ~ ~ + 1 ~ Wool - places in the coordinates of the player's coordinates.
tP Player 48 41 14 - Player player moves to point by coordinates x \u003d 48, y \u003d 41, z \u003d 14

Who do command blocks work with?
Thanks to the pointers, you can specify a player or creature on which the command will be performed:

@P - a player who activated the command.
@a - all players.
@R - a random player.
@e - all entities (including mobs).

Auxiliary pointers:
And how to make it so that we say moving all the players to some point, except for yourself? Yes, it is easy to use additional pointers for this, for example: tP @a 228 811 381 - teleports all players, except for a player with nickname Admin. exactly x \u003d 228, y \u003d 811, z \u003d 381. All parameters:

x - coordinate on the X axis. If you put instead of value ~
y-coordinate on the Y axis. If you put instead of value ~ The point will be the command block.
z - coordinate along the z axis. If you put instead of value ~ The point will be the command block.
r is the maximum search radius.
rm is the minimum search radius.
m - game mode.
l is the maximum level of experience.
lM is the minimum level of experience.
name - player's nickname.
c is an additional argument for @a, which limits the number of players to execute the command. For example, if you enter @a, the team will affect the first five players from the list, @a on the last five of the list.
type - as an example, the / kill @e team will kill all skeletons, and the / kill @e command will kill all the entities that are not a player.

Sample team:

give @p Gold_ingot 20 - gives the nearest player that is within the radius of 10 blocks of 20 gold bars.

Command Block Modes

Three command units mode are available: pulse, chain, and repetition - the block color varies depending on the mode.

Pulse mode (orange): activates the specified command
Chain mode (green): The command will work if the unit is attached to another command unit and connects to other command blocks.
Repetition mode (blue): The command repeats each TIK while the unit has power.

Impauls mode
These are the usual command blocks that are used to interact with chain blocks, but you can also execute commands and simply in these blocks.

Chain mode
I think that already out of the name, and so it is clear that this command block mode works according to the chain scheme.

Please note that the chain type is needed to work a command unit with a pulse, which will just send a signal, as well as a block of red stone, without which the command unit with a chain type will not work.

Team title And its parameters:

title Clear - Clears the messages from the player's screen.
title Reset - Clears the messages from the player's screen and resets the parameters.
title Title - title that shows text on the screen.
title Subtitle is a subtitle that is displayed when the title appears.
title ActionBar - Displays an inscription on the inventory.
title Times - appearance, delay and disappearing of text. By default, the following values \u200b\u200bare: 10 (0.5 s), 70 (3.5 s) and 20 (1 s).

Example of command execution:

title @a title §6 Incidently - header with orange color.
title @a ActionBar Hi! - Displays text above inventory.
title @a subtitle Chapter 1 - subtitle.

The command block in minecraft is a block in which various commands can be made. After receiving the signal from the Red Stone, it will begin to fulfill the task it. The block largely expands the possibilities of players and finds many ways to use in the gameplay. Thus, many gamers have a question how to make a command unit in minecraft.

Creating a command bloc

Just to take and make a command block (from the English "block") in Minecraft it is not possible. However, it can be obtained using special cheats and teams.

Run a single game in Main in creativity.
In the settings of the world, include the function of using cheats.
Pursuing a question as in minecraft to make a command for issuing a block, you need to open the console.
In the console row, you will need to enter the command: Give * Nickname player * Command_Block.

After performing this team, the block will be in the hand of the character of the corresponding player.

You can give the unit to yourself, another player or a whole group. In the survival mode it is impossible to use them.

How to use a block

The block is widely used in the game by performing various commands.

When the command unit turns out to be in the hands of the character, click on the PCM on the ground to install it. After that, you need to click the same button by the attribute itself.

This will open the command block window where you can enter the necessary task or change its parameters. In the future, changes can be made at any convenient moment. If something was done wrong, then in the same window the user will receive a corresponding notice.

Blocks can be in passive mode, run from the chain reaction through similar objects or to work across the signal transmitted by red stone. The command unit may also have a direction according to which you can build a whole chain from blocks that are triggered one by one.

If desired, the player can set the binding unit. With this feature, you can kill specific entities or all in the district, in addition to the player itself. The unit can be configured to interact with other players.

In some situations, the command unit can be used for teleportation of one player or a whole group. To do this, you will need to specify not only the command, but also the coordinates.

In principle, the command unit supports a lot of tasks, familiar with the full list of which is possible on numerous Internet resources. You can view the entire list of possible commands directly inside the game, setting in the Chat / Help window.

Video: How to use the command block in Minecraft.

The same teams as in the usual chat. What is the command block, how to get it and how to use? In this article we will tell you about him!

This is really a very useful block and it expands the possibility of creating cards in Minecraft

You can find a complete list of commands on, but not all of them work in Minecraft on Android, iOS and Windows 10 versions.

Last time we explained the positioning system and the associated commands and arguments. Just the creation of gaming cards is why people usually want to learn how to use command blocks. If you are here for this reason, you can count on other lessons that will focus on mapping. First, we will add knowledge of missing arguments.

Next argument. This argument, as you could, return the "type" and "type of object", in other words, which object is involved. You can also use the prefix "!" To make the choice of other types of objects. Let's try now that we have just learned. Find the nearest of our two pigs.

+ Command Blocks in MCPE:

Unlike the PC version, in PE, command blocks do not make long loads, i.e. FPS will be stable.
The command block interface is adapted for mobile devices.

- Command Blocks in MCPE:

Too small functionality.

Or, if you make the choice of all objects, but do not want a player. These arguments are "levels of experience" or the number of "levels" of experience, which is "green", which you use to enchant. The current level is displayed above the active inventory with a green number. So, let's write a simple alert script that will allow players to understand how this happens. You will need two command blocks to connect to the clock. The only problem is that the script will spawn the chat player every time the circuit is completed, how to cope with it in the Tablo system textbook.

Examples of teams:

give @P Apple 5 - gives the player five apples.
setblock ~ ~ + 1 ~ Wool - places in the coordinates of the player's coordinates.
tP Player 48 41 14 - Player player moves to point by coordinates x \u003d 48, y \u003d 41, z \u003d 14

Who do command blocks work with?
Thanks to the pointers, you can specify a player or creature on which the command will be performed:

@P - a player who activated the command.
@a - all players.
@R - a random player.
@e - all entities (including mobs).

x - coordinate on the X axis. If you put instead of value ~
y-coordinate on the Y axis. If you put instead of value ~
z - coordinate along the z axis. If you put instead of value ~ The point will be the command block.
r is the maximum search radius.
rm is the minimum search radius.
m - game mode.
l is the maximum level of experience.
lM is the minimum level of experience.
name - player's nickname.
c is an additional argument for @a, which limits the number of players to execute the command. For example, if you enter @a, the team will affect the first five players from the list, @a on the last five of the list.
type - as an example, the / kill @e team will kill all skeletons, and the / kill @e command will kill all the entities that are not a player.

Sample team:

give @p Gold_ingot 20 - gives the nearest player that is within the radius of 10 blocks of 20 gold bars.

Teams for manipulating the world

Nevertheless, this is a real scenario in which you can invent thousands of people with the right knowledge. Now you can submit commands used for manipulations with the world, which will be useful for you, for example, when you create a reproducible card on your own or simply when you want to adapt the test world.

You install this default mode when creating the world, it is creative. Try to change it now for survival. When a new player joins the world, the game mode will be set to survival. As you can guess, this team changes complexity. In the game four, and you can specify them in different ways.

Command Block Modes

Three command units mode are available: pulse, chain, and repetition - the block color varies depending on the mode.

Pulse mode (orange): activates the specified command
Chain mode (green): The command will work if the unit is attached to another command unit and connects to other command blocks.
Repetition mode (blue): The command repeats each TIK while the unit has power.

The difficulty is saved for each world separately, so if you enter the settings, you see the difficulties of the last loaded world. As you know, the difficulty can be "blocked" for this world, which makes it impossible to change it. However, this command does not look at the lock, so it is not 100% protection, however, when the cheats are disabled, the player in the blocked world cannot change it. If the command is performed on the server, the complexity changes, but the next time you start the server, it will again be the default value for the server, since it is specified by the server properties during startup.

Impauls mode
These are the usual command blocks that are used to interact with chain blocks, but you can also execute commands and simply in these blocks.

Chain mode
I think that already out of the name, and so it is clear that this command block mode works according to the chain scheme.

You can make this command one of the few when cheats are disabled. He has no arguments and displays the seed of the world where he is. This number says the generator of the world "how to generate it", i.e. Two newly created worlds with the same seed will look equally. This number can be entered when creating a world.

If it rains, stops, and if not, it begins. The first mandatory argument is the weather status for setting the team. It is clear that the rain does not mean that rain means that rain thunderstorms means rain and beating.

If the flash falls into Liana, it charges it.
If he hit a pig, he will make Pygman.

You can also specify duration. This is the minimum amount of time that the condition takes. After time, he will be able to re-establish a new status in the game. This time is given in the so-called "ticks", you can enter a value between 1.

Team title And its parameters:

title Clear - Clears the messages from the player's screen.
title Reset - Clears the messages from the player's screen and resets the parameters.
title Title - title that shows text on the screen.
title Subtitle is a subtitle that is displayed when the title appears.
title ActionBar - Displays an inscription on the inventory.
title Times - appearance, delay and disappearing of text. By default, the following values \u200b\u200bare: 10 (0.5 s), 70 (3.5 s) and 20 (1 s).

Example of command execution:

title @a title §6 Incidently - header with orange color.
title @a ActionBar Hi! - Displays text above inventory.
title @a subtitle Chapter 1 - subtitle.

Also known as Boss Update is adding slash commands. And what is a slash team, you ask? If you played the computer version of the game, you probably know that they are there. In the chat window, you must enter a slash (/), and then enter the command.

So let's try to now turn on the storm. If you play, like me, in desert biomes, you will see only a cloudy sky, but without rain or lightning. This is due to the fact that each biomass has its own temperature, which determines whether it rains, snow or nothing at all.

Either execute only the command, the place is set in accordance with the Contractor Coordinator or enter the coordinates. As you may have come across, this personal point of appearance is always installed next to the bed, in which you sleep - after death you will find yourself on your database, and not at the starting point. If you want to install your own point of appearance, where you are now, you do not need to specify any arguments. When you install it on another player, but you do not need to specify the coordinates at the point where you are now.

Slash Commands at 0.15.9 / 0.16.0

Commands provide a player an incredible number of functionality on the Minecraft PC. Currently, a beta version of Pocket Edition 0.15.9 / 0.16.0 is available. We got a beta version in our hands, and here are the teams that we found.

/ clearfixedinv - Fully cleans the inventory of the specified player or only removes the objects specified on the ID.

Otherwise, the command requires the full specification. Use this command to determine the number of hours. The query query command reports how much time has passed from a certain point. It can also be seen on the debug screen. . You probably have a few more questions about how exactly the convergence of the entire platform should tremble.

Q: Is the best update for all issues updated? If there are platforms that you are interested in where we are not yet, let us know about it. Question: Is it safe for children better for children? We are not quite ready to declare the date of release, but we strive to release this year. Question: What is best updating the repurchase process for disk owners?

/ Clone [Mode] [Mode2] - Closes the region from point 1 (x1 y1 z1) to point 2 (x2 y2 z2) to point 3 (x3 y3 z3) using mode (mode) and under mode (mode2). Mode (mode) can have 3 values: Replace, Masked and Filtered, and under the mode (MODE2) can be Normal, Force or Move.

/ Deop. - Removes the operator privileges from the player.

/ Execute. - Performs the specified command for any entity. Relative coordinates are indicated by the parameters x, y and z. If the Detect parameter is specified, the specified command is triggered only if the coordinates x2, y2, z2 costs the unit specified id and metadata.

Please be prepared for short wait, although it may take several days to process all requests for redemption. Question: What is the transaction with a five-hour requirement? When you run it, you will see the name of the game on the screensaver. This is a very interesting job, but represents many difficulties for the development process. You can continue playing the old version of the console to continue to earn what you missed.

Will they translate to a new console version? Q: Are supplements add to console editions added? Q: When can players on consoles be able to use custom skins or create custom superplane and reinforced worlds? In the server browser there is a list of verified servers to which you can join with one click.

/ Fill. [Block Parameters] [Replacement Method] - Fills the selected area from to blocks with block parameters [Block parameters] using the replacement method [Replacement method] with.

Replacement methods:

keep - will replace only air blocks
hollow - creates a cube with emptiness inside
outline is identical to Hollow, except that this replacement method will leave the interior unchanged
destroy - replace all blocks in the specified area with the ability to pick them up as drop
rEPLACE - will replace all blocks in the specified area

There is also an alternative command version that works only with the Replace method:
fILL Replace

This requires a large number of administrative and backend functions so that they can focus on creating and maintaining excellent online communities. Q: How do potential server partners begin to be embedded in the server browser? Although we have three servers at startup, we plan to enter more servers into the game over time.

Over time, we plan to add more servers. Q: Why did you choose these partners instead of others? On consoles due to the restrictions of the platform, access to the server is limited only to partner servers. Will the studio stop the game update, because the new gameplay and mini-games are available through servers? Q: How to play mini-games from the old version of the console?

Translation of parameters:

TileName - Name of the new block
datavalue - Parameters of the new block
replaceTileName - Block name to replace
rEPLACEDATAVALUE - block parameters to replace

/ Gamemode. [target] - Changes the game mode for a specific player. Survival (Survival, S or 0), Creativity (Creative, C or 1), Adventure (Adventure, A or 2), Observation (Spectator, SP or 3).

Q: Do you invite links for all platforms? Q: Are servers safe for my children? Our official server partners have also taken steps to provide a secure and convenient online game for all ages, including chat filtering, reports in the game and permanent moderation.

Parents can turn off the chat, which will allow children to join servers, but not to see and not participate in any connections on the server with other players. Parents can limit the multiplayer game only "friends" or "no", which does not allow children at all to connect to servers. Q: What should I do if someone mock me?

If the player's nickname is not specified, the command will change the game mode for the one who entered it. So that the team worked, the player should be online.

/ Give. [Quantity] [Additional Information] - gives the player a specific item / block in the specified number of data numbering.

For example, if you enter / Give John 4, it will give a player with John's nickname 1 Cobblestone block, / Give John 35 64 11 (I will give a full stack of blue wool, / Give John 278 1 1000 - damaged to 1000 units of diamond peg, A / GIVE John 373 10 8193 will give 10 bubbles of regeneration potions.

/ Help. [Page | Team] or/? [Page | team] - Displays a list of all available console commands. The list is divided into pages, so the command can take the number of the page as an argument. You can also withdraw a certificate on a specific command. There are no some commands in the help.

/ Kill [player] - Kills the player, causing it about 3.4 × 1038 units of damage, according to the effects of similar with the damage from emptiness (the armor is ignored). It is useful if the player is lost, stuck or dies from hunger (if after death the player can easily find things). Works in creativity mode.

/ List. - Displays a list of all player connected to the server.

/ MSG.

/ Op. - Gives the specified player privilege of the operator.

/ Say. - Shows all players on the server your message.

/ setblock [Extra options ] - Places a block on the specified coordinates. For example, the / setblock ~ 1 ~ 1 ~ Minecraft: Stone will put a stone over the player who called the team.

/ setFixedinvslot.- adds to the right slot to the inventory

/ SetWorldspawn. - Sets the spa point for the whole world by the player coordinates or the team specified in the syntax. Example: / SetWorldSpawn 50 74 -87

/ Spawnpoint. [target] - Sets the spa point for the player. If the player is not specified, the command is performed for the player who collected the command. If the coordinates are not specified, the point of the spa is the current position is set.

/ Summon. [Coordinates] [Advanced Parameters] - Spoon the specified entity on coordinates with specified parameters. If the coordinates are not specified, the spa point will serve the current position of the player. For example: / Summon PIG ~ ~ ~ (Saddle: 1, CustomName: »Mr. Pork», CustomNameVisible: 1).

This team will create a pig with a saddle and name Mr. Pig. The name is visible even through the walls. If CustomNameVisible is zero, then the nickname is visible only if the sight is induced to the mob.

/ Teleport. - Teleports the essence in the coordinates x, y, z. The x and z values \u200b\u200bshould be in the range from 30,000,000 to -30000000, and Y from -4096 to 4096.

Use the y-angle to turn horizontally (180 to the north, 0 south, 90 west and -90 to the east), and the X-angle for rotation vertically (-90 - up, 90 - down).

/ Tell. - Sends a private message to the player.

/ testforblock. [Extras. parameters] - Checks the presence of a block on the coordinates, and if it is present there, the comparator will display a signal. Also, using this command, you can check the availability of objects in the chests.

/ testforblocks. [Mode] - Checks the coincidence of two regions and if both areas are identical, the comparator will display a signal. The "Mode" section can make Masked or All values, with Masked air is not taken into account.

/ Time Add. - Adds the specified value to the current time. The number parameter can take as many non-negative values.

/ Time Query.

daytime - Displays the number of game ticks who have passed from dawn
gametime - takes the age of the world in game ticks
day - Displays the number of past game days

/ Time Set. - Sets the time of day. The number parameter can take integer values \u200b\u200bin the range from 0 to 24000. 0 - Dawn, 6000 - noon, 12000 - Sunset and 18000 - midnight (that is, the clock is divided by half). Day is equivalent to 1000 (dawn) and Night - 13000 (sunset).

/ ToggledownFall - precipitation switch.

/ TP. - teleports the first player to the second, that is, "player1" to "Player2"

/ W. - Sends a personal message to another player. Used on servers to write something to another player so that the rest do not see.

/ XP. - Gives the specified player a certain number of experience points, permissible values \u200b\u200bfrom 0 to 2.147,483,647. If, after the number, enter L, the specified number of levels will be added. In addition, levels can be reduced, for example, -10L will reduce the player level for 10.

Perform any actions appointed by the participants of the game are carried out by command blocks. It is not possible to create a similar team playing in Survival mode. It will not work and call them as tools while using the Creative game mode. To functionally get such blocks, you need to apply a pair of sufficiently simple commands, which, in fact, will allow them to call them. Consider a few simple methods.

Get a command unit in Minecraft: Method 1

Run Minecraft and select Single Mode. Perform the creation of a world in which cheats are included.

Open the chat window and press the "/" key. This symbol will open the window in which commands can be entered.

Enter the assignment you need by selecting from the following lines:

"/ Give" name Minecraft: Command_Block and the desired number - after its introduction to the console, the encountered items will appear among tools;
"/ Setblock x y z minecraft: command_block" - this line turns one of the blocks into another, making it command, and to find it, you need to press F3 and select one of the found;
"/ Summon Item X Y Z (Item: (ID: Minecraft: Command_Block, Count: 1))" - Entering this sequence, the game participant will call the blocks where he needs.

Get a command unit in Minecraft: Method 2

Run the game, select Single Mode. Log in to the world's existing, it may be the server. Enter the chat required to task commands by clicking on "/".

Enter one of the options proposed:

"/ Give name Minecraft: Command_block The desired number" - this line allows you to call the desired number of items and add them to the existing inventory;
"/ Setblock x y z minecraft: command_block" - if you enter such a text, you can replace any available command to the command, and to determine the place in which it is located, you need to press the F3 key;
"/ Summon Item X Y Z (Item: (ID: Minecraft: Command_Block, Count: 1))" - Blocks will appear on a given plot.

Get a command block in Minecraft: Method 3

The "E" key drag the unit and place on the panel. Press the right mouse button and place the item on the ground.
Click on it again the same mouse button. After that, a menu will open in which you can configure actions.
In this window you need to enter the "/" symbol. The options of these blocks resemble those used in the chat. They are sometimes associated with an electric board. This allows commands automatically.
Press the "/" key, the console window will appear in which you write the word "HELP". After it, dial the name of that object to which the command sequence is prescribed.

Today we will tell you what is the command block in minecraft, how to get it, why is it needed and how, where and for which it can be used.

What are command blocks?

In the game Minecraft, the command unit (CB) can automatically perform certain console commands until the red stone is activated.

They work in adventure mode, and allow maps creators to improve interaction with the player. At the same time, the player is not able to destroy the blocks and build new ones.

In the "Survival" mode with command units you can not interact or destroy them.

They cannot be created using crafting, and they are not found in the inventory playing in creative mode. Creative mode players and server administrators can use the Give Console command to get KB or make it available for other players. It looks like this:

/ Give Minecraft: Command_Block

When typing, remove the brackets on the edges of the player name and quantity:

/ Give AtomBox Minecraft: Command_Block 1

KB has a graphical interface with a text field, affordable on the right click of the mouse.

Place command units, enter commands and save changes only players in creative mode and players with the administrator status on the server.

To use them in a single game or multiplayer worlds, you must enable LAN mode and allow cheats.

Where command blocks are used

Have you ever played adventure maps, where is always the night, or where the weather never changes? You could download the cards where players receive special awards, improvements or experience by pressing the button or for completing the task. All this becomes possible thanks to the KB. When creating your Minecraft card, you need command blocks if:

You want a permanent day or night;
You want to change the weather;
You want to change the complexity of the game;
You want to reproduce a specific sound;
You want to send a message to the player;
You want to teleport to another location;
You want to give to players subjects.

YouTube has many videos describing a variety of Minecraft cards. Multiplayer cards are especially popular. There are many categories available for downloading Minecraft maps that use command blocks to improve the player's convenience. There are a lot of reasons for their use by card developers. They include maps of the following categories:

Adventure cards;
Parkur cards;
Puzzle cards;
Cards for survival;

Adventure cards sharpened on the plot, and Gamer acts as the main character of the narrative. Previously, adventure cards relied on the story story through signs and books, and now the narrative is available through dialogues and sounds, and all thanks to the KB.

Parkur cards Forced the player to get from one end of the world to another with a minimum number of deaths. Often they contain incredible jumps and other deadly obstacles. Command blocks make it possible to install spanea points (appearance) of the character in front of complex obstacles.

Puzzle cards They focus on the skills of solving problems, offering labyrinths, traps and other difficulties. Some such maps have a plot, like adventure. The use of KB allows such maps easier to offer directions related to the plot dialogues and sounds.

Cards for survival Can be focused on survival in a single game or in a multiplayer, or simply include the plot. KB can give players a starting point of spauna, as well as the information associated with the plot. Features here are endless.

How to use a command block

Their installation is easier than the most players think in Minecraft. Commands can be confusing, but some of them (such as setting the day) are very simple for programming. Large projects can be planned later, and for beginnings, try to master the basics of placement, settings and use of the KB.

Do not forget that command blocks can only appear in creative game mode. To go to it, you need appropriate privileges on the server (if available) or activated cheats.

In the chat field, type "/ Gamemode C", "/ Gamemode Creative" or "/ GameMode 1" without quotes.

2. Pressing the command block right mouse button

In creative mode, to access the command block, click on it with right mouse button. To generate it, you need to use the "Give" command, as described above in the text:

/ Give Minecraft: Command_Block

Command blocks work, only being connected to the electrical chain of a red stone (by the way, there is a good mod that allows you to increase the distance of energy transmission). Pressing the right mouse button opens a dialog box where you can enter the server command. The maximum command length can be 254 characters.

3. Enter the command and click Finish

When you enter the command to the block, you need to specify, on which player it is directed. This can be made by entering a player name or a choice of three different variables: "@p" (nearest player), @R (random player) or @a (all players). These variables are especially useful in situations when the player activating the team is unknown. By setting the command, click Finish to save it.

Remember that one KB can only execute one command!

Practical examples of use

The following examples are simple and practical command bloc applications in a single and multiplayer game in Minecraft worlds.

How to change the rules of the game

Gaming rules are a relatively new feature that allows players and command blocs to change certain basic settings of the Minecraft world. There are nine described gaming rules that can be controlled using the command block on the map.

You can use game rules for creating permanent daylight or darkness, disconnect the spun mobs, loss of items from mobs and much more. When entering the "Gamerule" command, use the following command:

Gaming Rule	Effect of rule
commandBlockoutput.	Includes / Disables Text Entering to KB
dodaylightCycle.	Turns on / off day / night cycle
dofireTrick.	Includes / Turns off the distribution / disappearance of fire
domobloot.	Includes / disables the loss of objects from mobs
domobspawning	Includes / Disables Spauning Mobs
dotiledrops.	Includes / disables the loss of objects from the KB when they are destroyed
keepinventory.	Includes / Disables the saving of items in the inventory after the death of the player
mobgriefing.	Includes / Turns off the destruction of KB cripers or wanderer edge
naturalRegeneration	Includes / Disables Health Regeneration from Players

How to set the weather

Some cards use a dark topic, which is perfectly combined with rainy weather or thunder, whereas to play better with a clear sky. There are many options to manage the weather using the command blocks. Simple example of weather team:

In this case, the word input can be replaced with "Clear" (Clear), Rain (rain) or Thunder (Thunder).

You can connect the button or lever to the command block to switch the weather manually, or create an automatic red stone schema for permanent weather switching. It is easily achieved by using repeaters, buttons and construction block.

How to install a spa point

Spound points are an important component of many Minecraft cards, including adventure, parkur cards, puzzles and others. The need every time with the death of moving the map from the very beginning extremely annoying. Using the SpawnPoint command, you can save game progress and reborn after the death of the nearest checkpoint passed. The team looks like this:

By connecting the command unit to the construction button or pressure plate, players can set the spa point at the location of the KB.

If you need something more complicated, you can add the coordinate command to set the place of the spoun point.

Run from one place to another tires, especially on a multiplayer server. With the use of the Teleport command, players can move on certain coordinates of the world of Minecraft or in the location of other players. Enter the command to the command unit:

With them you can have a specific set of coordinates for the teleportation of the player, such as the location of the next part of the adventure card.

If the block is not intended for a particular player, you can use @p to select the nearest player.

If you are on a multiplayer server, you can bind the command block to yourself by applying your username in Minecraft.

These are just a few options how to use command blocks in single-user and multiplayer Minecraft games. There are many significantly more complex teams and diagrams from red stone that apply maps creators.

The command unit appeared in the popular Minecraft game only with 1.4 versions, which opens the latest functions for the participants of the game. From this version, gamers learned about such a concept as a command unit, as well as his connections with the console team. It is impossible to create it yourself.

The command block is a special item, you can enter and record various ciphers. After that, it begins to perform the intended command when the Redstone signal receives. Such a universal thing significantly expands the powers and capabilities of maps creators in which adventure mode is present. In such places you can darn the terrain. It can be opened in minecraft using the right key mouse. As a result, you will see a window in which certain characters are prescribed.

How to make it

Most players will be forced to upset, because it is impossible to make an independent thing. The reason for such a restriction is due to the fact that it opens incredible opportunities, namely, what thanks to him you can manage the card, communicate in the chat with all players at once. Therefore, it is impossible to do it yourself, but there is a unique chance - to get.

Acquisition options:

If you are the creator of the server, you can easily use it.
You can also get at the administrator of a specific server, namely asking for rights. To make a similar action, use the following feature - Give Player Command_Block. Specify the name of your character.
You can make a command unit in minecraft using a special cheat code. But it will be necessary to play only on a specific server that supports the use of such codes. The final stage is activation that is carried out thanks to the action of a red stone.

Teams

If you have a desire to get the entire list of commands that can be used, then use the chat and enter the word HELP. For example, to get ten iron bars, you must register the following form - Give @P Iron_ingot 10. Other - will allow teleport to the desired point with the specified coordinates, namely TP Player 42 21 60.

Pointers on players in minecraft.

@e - absolutely all entities in the game;
@a - all members of minecraft;
r is the maximum search radius rate;
rm is the minimum radius;
m is a game mode.

As you can see, it is quite practical, interesting and convenient to use a program that allows you to increase your powers, adrenaline and enjoyment in the game to the maximum. It is important, it is impossible to build it or scream independently, so you need to use a special team, then you will succeed. Successful game and new victories.

When creating any playable card, which will differ from randomly generated locations, construction, pixelart or plot scenarios, the server administrator can not do without using "embedded" functions. To implement them, you can use the command unit. This is a special device in which you can record the system team, starting from getting a resource player and ending with its teleportation to the specified location. But how to give yourself a command block?

A warning

There are only two ways to acquire this item. Both are that you will need to use system teams. This comes from what to do (scaffold) with infirred materials is impossible. That is why the question is: "How to give yourself a command block?" - always relevant. Whatever fashion you have set, no matter how experimented with the ingredients, you will not have anything. Anyone who claims that by downloading his mod, you can create command blocks - a fraudster who seeks to "throw a virus" to you. So how to give yourself a command block?

Methods

The first method of obtaining the command block is that you can create a map in "Creativity" mode. The command unit will be available to get among other items.

The second method is slightly harder. To do this, have to use how to give yourself a command block using the system? To do this, you will have to open the chat and write the following: / Give [Name: Command_Block [Number]. Also, this team will answer the question how to issue another player.

All syntax is written without brackets. Instead of the name of the character, you must specify the nickname of the right player, the number is the number of command blocks obtained. By the way, the main condition for the work of this command is the permission to use cheats. If this feature is disabled, you will not receive this item in anyone or in a multiplayer game.

Application

So, let's say you figured out how to give yourself a team unit, and it lies with you in inventory. Now let's learn to use it.

In order to place a block on the ground surface, drag it to the shortcut panel. After that, highlight it and click on the right place. At this point, you will open the control interface, with which we will enter the function. It should take into account that one command unit can only perform one instruction.

However, it is not always necessary that the player can find a command block and use it. It is much more interesting that the user can click on the lever, and the mountain of gold or the necessary items appeared before him. In this case, you can use red stone schemes.

Teams

In order to use the command block, a little know how to get it or install it. The most important thing is to be able to correctly register the syntax instructions. To do this, it is important to remember a few simple rules.

First, the command itself is written. Here, any feature that is activated using the console can be spelled.
Then the "zone of application" is given. That is, the player to which the effect or coordinate appearance of the subject will be applied.
And finally, additional arguments to clarify the characteristics of the object.

In general, the command will look like this.

/ [Team] [Nick Player or Coordinates] [Parameters]

To better be clear, let's give a few real examples. Let's start with how to issue items by the command block.

/ give @p iron_ingot 30

With this instruction, the command unit will give the nearest player within the radius of 10 blocks of iron bars - 30 pieces. Now let's see how to work with coordinates.

/ SPAWN 10 20 30 / Summon Enderdragon

Actually, from the syntax and so it is clear that the team calls on certain dragon coordinates. Finally, we note that the complete list of commands used by the command block can be seen by entering the chat / Help.

Command block - not a transparent unit that cannot be screaming. This unit is required to activate a wide variety of commands that are prescribed in the command console.

How to get a command block in minecraft?

To get it, in the chat it is necessary to register the following command without brackets: / Give [Your_nik] Command_Block [Desired Number of Blocks]. For example, / Give Razmik Command_Block 1. After pressing the ENTER button, the command unit will appear in your inventory.

How to activate the command block in minecraft?

Cut the activation of the code you can in the command block is possible due to the lever, Redstone, Redstone Torch, or through the button.

We will analyze the most simplest commands that can be used in the command block.

Changing the time of day. For example, you want to come night. To do this, set the block by clicking on it the LKM and we register in the console the following command: / Time Set Night.
Teleportation. For example, you need to teleport in some point on the map. To do this, go to the selected point, press F3 and remember the X, Y, Z coordinates. Then we go to the command block and prescribe the following command: / TP @P 252 56 -175. Figures 252 56 -175 These are x, y, z coordinate values.

The teams have a huge amount, above are the simplest of them.

Account Distributions / Keys / Bases / Freebie