40 m in Cuba. Calculation of the volume of sawn timber. Average weight values \u200b\u200bfor different humidity

The unedged board has a large run in the width at opposite ends, so when calculating the unedged board in the formula you need to substitute the average width. The average width of the unedged boards is measured in the middle of the length as a half as a width of both plasters (ends of the board) without taking into account the bark and the beam. The measurement result is rounded up to 10 mm, the shadow of up to 5 mm is not taken into account, and the shares of 5 mm are more considered for 10 mm.

Unedged board: what is it

Unedged board are the first board taken from the barrel. Her edges are not torn and have a conversion, which is unacceptable for the edged board. Unedged boards bark on the side edges. The first, removed from the barrel board has the most bark. Standard thickness of unedged boards 25, 40, 50 mm, and length - 6 m. Unedged boards are the cheapest of all boards. Therefore, they are used for forests, sheathing, roof crates, components of carrying structures, flooring, rough floors, on firewood. In order for the unedged boards to start rotes with them, you need to remove the bark, dry and process the antiseptic.

Construction of a private house, cottage or any other construction requires the preparation of the estimate. It indicates the number of building materials and their cost. There are several methods to carry out appropriate calculations. The board is a common material that is exploited everywhere. In order to determine how much the board in Cuba must be familiar with the calculation options and the nuances of this process.

Calculation of the boards of the board will depend on the degree of material processing, type and variety

How many boards in Cuba: varieties of sawn timber and features of their calculation

Boards, which are used in the construction of houses and other designs, differ in several criteria. First of all, the material is taken into account from which they are manufactured. Technical characteristics of the product depend on the tree of wood. Depending on the production method, these construction elements are divided into types:

edged;

Almost all products from wood: edged lumber, planed, structural, etc. measured in cubes (cubic meters)

unedged.

The first of them belong to the highest grade and are of the right form, since all their edges can be processed. In turn, the unedged products are most often used to organize draft flooring, etc. The peculiarity of such a material is that its side edges are not processed, they contain a bark and have a natural form. It simplifies the production of the unedged board and affects its cost.

In order to answer the question of how to calculate the board's cube, it is necessary to first decide which materials will be used in the construction process. For example, calculate the cube and the cost of the edged part is simpler, as it has a geometrically correct form.

For umbered products, there are constant values \u200b\u200bthat are medium arithmetic numbers. The table of boards in Cuba in this case is not always suitable, as it takes into account the rounding of even edged sawn timber.

To purchase lining, it may be necessary to make calculations to find out which area of \u200b\u200bthe material is in the cubic meter

Separately, it is worth saying about building materials for finishing. This group includes genital boards, lining, block house and products that mimic the timber. The design of these piston parts includes special ribs and grooves needed for a dense connection of individual elements among themselves.

Helpful information! When calculating the fixed lumber, it is necessary to navigate only on the dimensions of the main part of the board. Thus, the size of the lock connections is not taken into account, only the numeric values \u200b\u200bof the body of the product are taken to calculate.

Regardless of which variation of the material is used, a single formula is used to calculate the number of boards in Cuba. Except in this case are unedged products. Their calculation has its own characteristics, because such parts do not have all the faces needed to calculate.

Cuba volume formula: how many edged board in 1 cubic meter

The cube is a geometric shape that consists of 6 equivalent faces. Each of them is a square. To determine the volume of this figure, it is necessary to multiply 3 of the indicator:

length;

To determine the number of cropped boards in 1 cube, you need to know the volume of one of them, finding a product of three quantities, and then divide 1m3 on it

width;
height.

In order to figure out how many boards in 1 cube, you need to multiply multiple values. The result is a mathematical expression that looks like this:

V \u003d H x b x L, where:

h is the height of the edgedwork (M);

b - element width (M);

L is the length of one detail (m).

Using such a formula, you can determine the volume of 1 element. It is important to remember that when calculating, it is necessary to translate the millimeter values \u200b\u200bof the product to meters. For example, in order to determine how many boards 25x150x6000 in Cuba, it will be necessary to convert numbers using them by 0.001. The finished mathematical expression after such a transformation will look like this:

V \u003d 0.025 x 0.15 x 6

The calculation algorithm is the same for all sawn timber, regardless of their features.

As a result, it turns out that the volume of one wooden part is 0.0225 cubic meters (m³). Next remains to calculate how many pieces of the edged board are contained in 1 cubic meter. For this there is a simple formula. It implies a division of 1 cubic meter on the volume of 1 boards, which was obtained using the past mathematical expression. Consider the calculation on the example:

1 m³ / 0.0225 m³ \u003d 44.4

Thus, 1 cubic meter contains approximately (if rounded) 44 boards. After that, you can already independently determine the amount of material necessary to build a specific design. And also at this stage, you can make a general estimate indicating the price of a cutting board for the cube.

To calculate the cost of 1 edged board, a mathematical expression is used, which implies the multiplication of the volume of 1 part on the price of a cubic meter. Consider on the example:

0,0225 x 8200 rubles. \u003d 184.5 rubles.

The calculation showed that the cost of 1 product of the edged species will be approximately 184 rubles. In the event that the cost of 1 part is known, and it is necessary to calculate the price of the board of the board, you need to do the backward manipulation. In this situation, it will be necessary to divide the price for 1 product (184.5) on its volume (0.0225).

After conducting certain calculations, you can find out that in 1 cubic meter contains approximately 44 boards.

Note! Sometimes, especially when buying a small batch of boards, there is a confusion with signs after the comma. In some cases, sawn timber sellers specifically exhibit the cost calculated when rounding up to 3 numbers. However, by law, such a value is suitable only for large batches of boards. When buying several products, it is recommended to conduct rounding in GOST, namely to 0.000001 m³.

When calculating the amount of the board and the cost of lumber for the cubic meter, it is desirable to take into account unplanned losses that very often occur during construction. Therefore, it is recommended to buy edged products with a slight margin (several pieces).

How many boards in Cuba: Calculation of the Unedged Lumber

Calculation of the cabbage of the Unedte Board has some nuances, since its form is not correct. Such material has no rectangular section throughout the entire length, so it is used to organize temporary structures. The lower and upper surfaces of the unedged board must be processed over the entire length. Otherwise, this product is a side part of a log (horn).

The calculation of the cubature will depend on the degree of material processing, type and varieties, for example, the edged and unedged board is calculated differently

To find the volume of unedged lumber in 1 cubic meter, as well as its number there are several methods. Immediately it is worth noting that determine how many boards in one Cuba are quite difficult if it comes to incorrect geometric forms. Therefore, the initial numbers obtained by calculating the unedged parts will be an exemplary indicator.

Consider which methods are used to calculate the cubic and the number of unedged lumber:

batch;
vull;
method of samples.

In the first case, you will need to load the lumber into the package that must have the right form. After bookmark, you need to measure the desired indicators. Next, the standard procedure for determining the amount using the values \u200b\u200bobtained when removing measurements are made. The most common method for products that do not have clear faces are most common. For example, using it, you can calculate the 2x150x6000 boards in Cuba (unedged).

Over the width of the Unedte Board, during the calculations, take averaged indicator

It is worth noting that in mathematical expression of this type there is a special coefficient (for width), which is an arithmetic average. Such an option is although it is not fast, but it allows you to answer the question how to calculate the Cube Board.

The magnificent method involves the use of numbers corresponding to the average arithmetic height values \u200b\u200band the width of the edge product. These values \u200b\u200bare calculated in meters.

In order to find an arithmetic average, you need to measure the board. The minimum width is measured (in a narrow place) and the maximum. Next, both indicators add up and shared in half. After that, the same manipulation of height is performed. The numbers obtained during the calculation must be multiplied by each other and the length of the product.

Consider how it looks like a mathematical expression:

(B Max + B min) / 2 x (H max + h min) / 2 x L \u003d V

When calculating large parties of wooden building materials, the method of determining the volume takes the sample method

Using such a formula, will not be difficult to determine the amount of 1 unedged element and answer the question of how to calculate the cubature of the part. After receiving this value, you can calculate the total number of boards in the cubic meter. For such a calculation, it will be necessary to use a formula similar to the edged part (cubic meter is divided into the volume of the product).

Helpful information! When buying raw boards, you must be attentive. Sellers must use a coefficient that affects a decrease in total taking into account the future shrinkage. To calculate wet conifer products, 1 cubic meter is required to multiply by 0.96. In turn, the coefficient for hardwood is 0.95.

The last way to determine the volume of sawn timber and its number in 1 cubic meter is the sample method. It is used in the calculations of large parties of wooden building materials. The essence of this method is that several are selected from the total weight of the boards. Then the details are measured and the calculation according to the magical way. The numbers obtained are multiplied by the total number of parts in the party.

Unedged board has a big run in width at opposite ends, so when calculating the unedged board in the formula you need to substitute the average width

How many boards in Cuba 50x150x6000 in Cuba: payment

As an example, you can take an umbered product with 50 by 150 by 6000 mm. First we translate millimeters to meters. Some people do not know how many millimeters are 1 meter. For the conversion, you will need to multiply the required number in mm per ratio of 0.001. In the finished form (with substituted values), the formula will look like this:

(0.155 + 0.145) / 2 x (0.055 + 0.045) / 2 x 6 \u003d V

After addition and division on 2, we obtain the average arithmetic width and height of the unedged part. Thus, the formula acquires a more understandable, standard view:

0.15 x 0.05 x 6 \u003d 0.045

This is how the calculation is calculated, the result of which is the foundation of 1 board. To determine the amount of products in 1 cubic meter, the same formula is used as in the case of a edged analogue.

Before determine how many boards 50x150x6000mm is placed in 1 cubic meter, you need to translate millimeters to meters

If necessary, you can calculate the area of \u200b\u200bone board. Most often it is required when the manufacturer indicates the price per square meter, and not per cube. The field formula implies multiplication of the width of the part at its length. It is important in this case not to be mistaken and not forget to translate millimeters into meters.

In order to determine the cost, the same formula is used as in the case of edged sawn timber. You just need to multiply the volume of 1 parts by a value that corresponds to the total price of the cube. This is done by calculating cubes in the 50x150x6000 Cuba Cuba.

Calculation of the board using an online calculator

Perhaps the easiest way (on a par with a table of lumber cube) to determine the exact value of the volume and quantity of wooden boards - an online calculator. It is a program with specified algorithms that allow you to calculate all the necessary lumber values. This method makes it possible to calculate not only the edged board, but also other varieties of these products.

Note! In order to avoid the probability of error when calculating the material on an online calculator, you should immediately specify, for which board is used.

So as not to be mistaken when calculating the material on the online calculator, you need to specify for which board is used measurement

The process itself is quite simple. Initially, it is necessary to find a calculator on one of the profile sites using the search line of the browser. Next, you will need to enter the necessary indicators in the corresponding cells. Calculator boards in Cuba will calculate independently.

This method is popular and allows you to quickly and accurately determine all the necessary lumber values. When using the calculator, it is recommended to check the completion of filling several times. In case of error, the calculation will be incorrectly executed, which is fraught with serious discrepancies in the final figures.

How many boards in Cuba: Table (6 meters)and tips on its use

The last method to determine the amount and cube of wooden products is the use of a special table. This method is very convenient, since it does not require long-term calculations. All that is needed is to simply find the desired value in the table using the source data (width, height and length).

In order to quickly find the right answer to the question, how many boards in one Cuba, the table is suitable in the best possible way. However, experts indicate one shortcomings of this method: the numbers corresponding to the cubury or quantity are often rounded. Therefore, if you need to perform the maximum accurate calculation, it is recommended to carry out all the calculations yourself.

Volume of cutting board in Cuba:

Dimensions of the boards, mm	Length, M.	Volume 1 pc., M³
50 to 200.	6	0,06
30 per 100.		0,018
20 at 150.		0,018
30 at 150.		0,027
20 for 200.		0,024
30 for 200.		0,036
25 per 100.		0,015
40 per 100.		0,024
25 at 150.		0,0225
40 at 150.		0,036
25 for 200.		0,03
50 per 100.		0,03
40 to 200.		0,048
50 to 150.		0,045
20 per 100.		0,012

In addition, before the start of the search for the desired value, it is desirable to make sure that the lifetime of the lumber is desirable. Tables can be different containing information about the cube of the boards with a length of 3, 4 or 6 m. Today, wooden products are the most common, the length of which is 6 meters. How many boards in one Cuba? A table that allows you to determine the amount of sawn timber, also uses rounded values.

Taking advantage of tables, you can define an approximate number of boards in Cuba, without resorting to calculations

Do not forget that the board can be made of different breeds of wood. Therefore, before using the table, it is recommended to make sure that you have chosen the necessary type of sawn timber.

How many boards in 1 cube: Table (6 meters):

Dimensions of the boards, mm	Length, M.	Number of pieces in 1 m³

The tabular method is good in that it does not require computing or independent filling of the overall and other lumber values \u200b\u200bto receive a response. It is suitable for defining the cube, and also allows you to answer the question of how many boards in Cuba. The table is ideal for calculating large batches of the product.

Prices of edged boards per cube: 50x150x6000and other species

Today in the construction market you can find many types of sawn timber. All of them are differentiated not only on the dimensions, but also by the tree of wood, from which were manufactured. And also the value of these products affects production technology and their purpose. In order to learn how much the Cube Cube costs, you need to get acquainted with all the species of these details.

The timber of the 1st grade, made in accordance with the technical conditions, is on average about 7,000 rubles. per cube

The most popular in the construction of private houses, cottages, as well as other designs is a classic edged board. It can be the 1st and 2nd grade. The first option is more expensive, as it has higher technical characteristics and durability.

Helpful information! The price of the cutting board of the 1st grade is approximately 7500 rubles. For 1 cu. Products that belong to the less high-quality group are about 4-6 thousand rubles. per 1 m³.

The width and height of the boards, as a rule, does not affect their cost. This is due to the fact that in the cubic meter, regardless of the dimensions of a wooden lumber, there will be the same number of details. In the sense that in the same price you get 44 cutting boards 25x1500x6000 (price per cubic: 7500 rubles.) Or 22 parts 50x150 having the same length.

Separately, it is worth saying on edged boards, made in accordance with the specifications (TU). A lumber of this type is worth an average of about 7000 rubles. per cube. Such boards are characterized by good high-quality characteristics and can be used in the construction of various designs.

Building board is often used in interior design.

Unedged products are cheaper, as they are less qualitative. The calculation of their cost is made using the averaged values. The price of the umbered sawn timber ranges from 4 to 5 thousand rubles. However, they are not recommended for construction. It is better to use better timber, for example, a cutting board of 40x150x6000 (price per cubic: 7500) or similar products with other dimensions.

When buying a wooden sawn timber, you must pay attention to some points. For example, the board must be smooth. The curvature of the product most often indicates that the technology was broken during its production. Such details are not used in construction, as they do not have the necessary quality.

How much will weigh the cube board? When purchasing this building material, it should take into account its mass. For example, a cutting board made of dry fir, weighs 450 kg (1 cubic meter). 1 m³ of raw products has a mass of 790 kg. Dry pine has a weight of 470, and raw - 890 kg. These knowledge will be needed during the transportation of products.

When choosing a board, it is necessary to check whether there are swollen on it, since their presence is strongly disturbed internal structure and lead to a decrease in strength characteristics.

When choosing a sawn timber and its calculation, it is necessary to be attentive. The board should not have cracks, chips and other defects. Small cracks are allowed, but it is recommended to buy a one-piece product, a quality product that corresponds to GOST. And also should pay attention to the presence of bitch. This is due to the fact that they negatively affect the strength of the wooden part. The choice of method of calculation depends on the specific case. If necessary, you can always use the services of specialists who will help to perform the correct calculation and make the estimate.

Read the cottage with your own hands:Terraced board: photos, videos, varieties and features of application

Videos: How many boards in the cubic meter. Place the developer

On this page you can count the number of boards in one cubic meter. The table of standard sections of sawn timber and a table of the number of boards (timber) in 1 cube for a length of 6 meters are also shown.

Calculator calculating the number of boards (timing) in one cubic meter in cross section and length

Answer: In one Cuba 0 pcs

Calculator knows the number of boards (timber) - how many cubes?

Answer: such boards (timber) is 0 m3 cost 0 rub

Table of standard sizes of cross sections of boards and timber.

The cross sections of the boards and timber have standard dimensions that correspond to GOST 24454-80 "Sailing breed lumber. Sizes"

Thickness, mm.	Width, mm.
16	75	100	125	150	-	-	-	-	-
19	75	100	125	150	175	-	-	-	-
22	75	100	125	150	175	200	225	-	-
25	75	100	125	150	175	200	225	250	275
32	75	100	125	150	175	200	225	250	275
40	75	100	125	150	175	200	225	250	275
44	75	100	125	150	175	200	225	250	275
50	75	100	125	150	175	200	225	250	275
60	75	100	125	150	175	200	225	250	275
75	75	100	125	150	175	200	225	250	275
100	-	100	125	150	175	200	225	250	275
125	-	-	125	150	175	200	225	250	-
150	-	-	-	150	175	200	225	250	-
175	-	-	-	-	175	200	225	250	-
200	-	-	-	-	-	200	225	250	-
250	-	-	-	-	-	-	-	250	-

Table How many 6 meter boards in one Cuba

For the standard length of 6 meters, the following table is counted. Lumber of small sections available in retail of course less than 6 meters. It is usually 3 m or 2.5 m. To calculate the number of any non-standard sizes, use the calculator at the top of the page.

No. p / p	Section size, mm	Length, mm.	Quantity in 1 Cuba, pcs	The area that can be sewed using 1 cubic meters, m2
1	16x75	6000	138,89	62,50	2	16x100	6000	104,17	62,50	3	16x125	6000	83,33	62,50	4	16x150	6000	69,44	62,50	5	19x75	6000	116,96	52,63	6	19x100	6000	87,72	52,63	7	19x125	6000	70,18	52,63	8	19x150	6000	58,48	52,63	9	19x175	6000	50,13	52,63	10	22x75	6000	101,01	45,45	11	22x100	6000	75,76	45,45	12	22x125	6000	60,61	45,45	13	22x150	6000	50,51	45,45	14	22x175	6000	43,29	45,45	15	22x200	6000	37,88	45,45	16	22x225	6000	33,67	45,45	17	25x75	6000	88,89	40,00	18	25x100	6000	66,67	40,00	19	25x125	6000	53,33	40,00	20	25x150	6000	44,44	40,00	21	25x175	6000	38,10	40,00	22	25x200.	6000	33,33	40,00	23	25x225	6000	29,63	40,00	24	25x250	6000	26,67	40,00	25	25x275	6000	24,24	40,00	26	32x75	6000	69,44	31,25	27	32x100	6000	52,08	31,25	28	32x125	6000	41,67	31,25	29	32x150	6000	34,72	31,25	30	32x175	6000	29,76	31,25	31	32x200	6000	26,04	31,25	32	32x225	6000	23,15	31,25	33	32x250	6000	20,83	31,25	34	32x275	6000	18,94	31,25	35	40x75	6000	55,56	25,00	36	40x100	6000	41,67	25,00	37	40x125	6000	33,33	25,00	38	40x150	6000	27,78	25,00	39	40x175	6000	23,81	25,00	40	40x200	6000	20,83	25,00	41	40x225	6000	18,52	25,00	42	40x250	6000	16,67	25,00	43	40x275	6000	15,15	25,00	44	44x75	6000	50,51	22,73	45	44X100.	6000	37,88	22,73	46	44X125	6000	30,30	22,73	47	44x150.	6000	25,25	22,73	48	44x175	6000	21,65	22,73	49	44x200.	6000	18,94	22,73	50	44X225	6000	16,84	22,73	51	44x250	6000	15,15	22,73	52	44x275	6000	13,77	22,73	53	50x75	6000	44,44	20,00	54	50x100	6000	33,33	20,00	55	50x125	6000	26,67	20,00	56	50x150	6000	22,22	20,00	57	50x175	6000	19,05	20,00	58	50x200.	6000	16,67	20,00	59	50x225	6000	14,81	20,00	60	50x250	6000	13,33	20,00	61	50x275	6000	12,12	20,00	62	60x75	6000	37,04	16,67	63	60x100	6000	27,78	16,67	64	60x125	6000	22,22	16,67	65	60x150	6000	18,52	16,67	66	60x175	6000	15,87	16,67	67	60x200	6000	13,89	16,67	68	60x225	6000	12,35	16,67	69	60x250	6000	11,11	16,67	70	60x275	6000	10,10	16,67	71	75x75	6000	29,63	13,33	72	75x100.	6000	22,22	13,33	73	75x125	6000	17,78	13,33	74	75x150	6000	14,81	13,33	75	75x175	6000	12,70	13,33	76	75x200	6000	11,11	13,33	77	75x225	6000	9,88	13,33	78	75x250	6000	8,89	13,33	79	75x275	6000	8,08	13,33	80	100x100	6000	16,67	10,00	81	100x125	6000	13,33	10,00	82	100x150	6000	11,11	10,00	83	100x175	6000	9,52	10,00	84	100x200	6000	8,33	10,00	85	100x225	6000	7,41	10,00	86	100x250	6000	6,67	10,00	87	100x275	6000	6,06	10,00	88	125x125	6000	10,67	8,00	89	125x150	6000	8,89	8,00	90	125x175	6000	7,62	8,00	91	125x200	6000	6,67	8,00	92	125x225.	6000	5,93	8,00	93	125x250	6000	5,33	8,00	94	150x150	6000	7,41	6,67	95	150x175	6000	6,35	6,67	96	150x200	6000	5,56	6,67	97	150x225	6000	4,94	6,67	98	150x250	6000	4,44	6,67	99	175x175	6000	5,44	5,71	100	175x200	6000	4,76	5,71	101	175x225	6000	4,23	5,71	102	175x250.	6000	3,81	5,71	103	200x200.	6000	4,17	5,00	104	200x225	6000	3,70	5,00	105	200x250.	6000	3,33	5,00	106	250x250	6000	2,67	4,00

The manufacture of such a lumber, like a edged board, use different species of trees. There is no bark on this chalkboard, which makes it suitable for the construction and manufacture of furniture.

The main difference of the edged board from other species is a complete abrasion of obol, the bark, it distinguishes it from non-cut with a reconnaissance

The most popular trees used for the manufacture of a cutting board are usually coniferous species of trees

Type of plaques of the material (raw materials)

Depending on the moisture content in it, the board is raw or dry. On the quality of the finished board, a large influence is a tree. Each tree has its own unique characteristics, but all of them combines natural origin and environmental purity.

The main sizes of edged lumber:

Standard length 6.0 meters (can be 4.0 and 3.0 m.)

As for construction, it is most often used by a piece of coniferous wood. These materials have a denser structure and they have excellent thermal conductivity.

Sorting cutting board:

In addition, the pine board has antiseptic qualities, which makes it an ideal material for interior finishing works. In addition, there is such a board inexpensively, which also attracts developers to use it in the design of the house.

Edged board in the construction of houses from a bar

When installing, the edged board is used for:

draft finish (under siding, plasterboard, etc.)

diseases of the rafter system

basket flooring (on it, finishing spool)

During the production of edged board, different options for cutting it. The highest quality is the radial cut, which uses a durable logs of a groove. As a result, this board is not subject to deformation during drying. The price of such a board will be higher, since for its manufacture use the best part of the log.

With semiradial pickle, material waste is significantly reduced, which reduces the price of the finished cutting board. The thickness of the board during the dissolution is also different. The edged board can be produced 25, 30, 40 mm. The lowest and cheap board is obtained with a tangential pickle. Such material is affected by swelling and drying, but this method of cutting gives the largest output of the material, which significantly reduces its price.

The price of the edged board is taken per cube or 1 meter square

Name	Dimensions, mm.	Price, rub / m3 *
Edged board	25-200 x.6000	5700
Edged board	25- 200 x.4000	5600
Edged board	25-70 x.2000,3000	5200

The difference in the cost between the edged or non-edged area of \u200b\u200b1500 rubles per cube., Think whether it is worth saving

The edged board is more often used in the production of construction works and in the manufacture of furniture products. When buying such a material, you must choose only a dry board, otherwise it may be subject to strain.

How many cubes in the edged board

25x150x6000. (length - 6000, height - 25, width - 150)

the volume of one board 1pc \u003d 0.0225 cubic meters. meters.

in 1cube \u003d 44.4 pcs. in fact - 44 pcs. Boards.

50x150x6000 (length - 6000, height - 50, width - 150)

volume of one board 1pc \u003d 0.045 cubic meters. meter

in 1cube \u003d. 22.2 pcs. Boards

Board size, mm
Number of boards in 1 cubic meter, pcs

25x150x4000 66.7 pcs.
40x150x4000 41.6 pcs.
20x100x6000 83.3 pcs.
25x100x6000 66.7 pcs.
40x100x6000 41.6 pcs.
50x100x6000 33.3 pcs.
25x150x6000 44.4 pcs.
30x150x6000 37.04 pcs.
40x150x6000 27.8 pcs.
50x150x6000 22.2 pcs.
25x200x6000 33.3 pcs.
40x200x6000 20.8 pcs.
50x200x6000 16.7 pcs.

In more detail in all sizes in the table

By the way, in this way, the number of pieces in the cutting board cube, you can calculate the cost and boards in one thing, it is necessary if you buy a piece or bought, if you did not have enough some amount.