Angular wood shelf. Corner shelf on the wall - how to do it. Secret installation - shelves without support

Photo
Corner shelves allow you to save space, so such a designer solution is a find for small areas. This element of furniture can be made independently, because this does not require special knowledge, expensive equipment and a large amount of time.

Drawing of the corner shelf.

Selection of material and shelf tools

The angular regiment can be made of various materials. Consumers often make a choice in favor of chipboard, MDF or plywood. Another option may be the bottomhole profiles, as well as glass.

The choice of tools depends on the material from which it is necessary to create the shelf with your own hands.

So, for wooden models it is worth it:

lobzik electric;
hacksaw;
saw with small teeth;
drill;
glue;
rake to create a circulation and a circular with a large radius;
wooden rail for the basis of the design.

Scheme of a wooden angular wall shelf.

If the angular regiment is masked from the bottomhole profile, then it is necessary to purchase the following tools:

drill;
hacksaw;
level;
self-tapping screw;
rake to enhance the rigidity of the edge;
glue "moment";
cable Channels.

The smallest number of tools is required when you need to make an angular glass shelf:

a set of holders for glass shelves (there are already self-tapping screws and dowels);
level;
drill.

When all materials and tools for performing work are collected, you can start creating the shelves.

How to make an angular regiment?

Creating a shelf and its installation - the process is fast enough. Therefore, in a few hours (or less) you can easily transform the room that does not compare with the cost of time when you need to create a closet. Make the shelves correctly using step-by-step instructions.

Shelf of glass

Scheme of an angular glass shelf.

To make such a shelf, you need to perform the following actions:

Cardboard creates the shelf template.
Cutting and processing glass can be performed both at home and in a special workshop. But it was the pro will produce all work at a high level, and the consumer will have the opportunity to choose the most suitable material.
The holders are purchased.
Next, you need to wear a shelf on one of the holders, applied to the wall and with a pencil outline the upper limit of its fastening.
The first holder is attached, for this, the auto-dowel and dowels are used.
The glass is inserted into the first holder, fixes and put on the second. Using the level you need to align the shelf. Mark the pencil of drilling places.
Fastening the second holder.

This is so simple way to make glass shelves at home.

Stone Shelf

The shelf can be given any form, however, you should always remember the direct corner of the foundation that will be attached to the wall.

Corner shelf from the submap profile.

In order to build a shelf, follow the instructions:

Material is placed.
With the help of the knife cuts the shelf.
Next, with the help of a special rail, which coincides with the profile in thickness and length, the framework is enhanced. To do this, it is necessary to put this material for the glue "moment" and consolidate it to the edge of the profile.
Holes drilled in the already glued rail.
Self-tapping screws are rushed into the wall under the already drilled in the shelf of the hole. During operation, the level is used.
Open designs are hidden behind the cable channels chosen. They are planted for glue.
The shelf is fixed on self-drawing.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile will easily turn into marble.

Shelf of chipboard (plywood, MDF)

Fastening such shelves is made in several ways. The first is the nozzle on the longitudinal rack-foundation, the second - in fixation in the slots of the transverse basis.

Making shelves from chipboard.

The first way is good because there is no need to drill neither tile, no walls:

The shelf is cut out of the chipboard. To do this, with the help of a circulation, you need to draw a circle, divide it into 4 parts and cut each electrolovka or hacksaw.
On the rake-based marks the locations of the shelves and the size of the required groove. The billets are applied to the rake, and their width is fixed.
Small-grained saws are made cuts to the depth of the middle of the rail, and an unnecessary element is extracted with a knife.
On the shelf at the corner base, the site is scheduled to be cut off. By area, it is equal to the depth and width of the groove in the rail.
Small-raised saws on drawn marking needs to be made and remove an unnecessary element.
Next, the shelves are grinding, and the entry into the grooves is checked.
With the help of glue, the rail must be fixed to the wall, fasten with scotch and leave at least an hour.
The shelves are inserted into the already fixed rail without any other fixation.

Such a simple way can be made of racks for a living room, bathroom, kitchen, etc.

To make the shelf in the second way, it is necessary to manufacture the grooves first, and only then take for the main element:

In two bars, the length of equal size of the sides of the shelves, with the help of a circular saw, the grooves the required width is generated.
These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their hats are completely recessed.
The angle is carefully measured. Measures are transferred to the material where the shelf circuit is drawn.
An element is pumped up using a jig or filling.
For faces, a special tape is used.
When the shelf is fully ready, it is inserted into the grooves.

Only a few hours, and the beautiful decor element is already in place!

Creating a shelf with your own hands, the master takes into account everything: their ideas, interior, features of the angle, where this subject will be.

Very often have to hang on the walls of the shelves to accommodate all the elements. To rationally plan the interior, it is necessary to use the corners and, thus, release the walls for cabinets and racks. This requires an angular regiment, which can be made independently from available materials. The article will consider the basic recommendations, how to make an angular regiment, as well as the main examples of structures.

Corner shelves in different rooms

You can install the angular regiment in each room, but in most cases it is great for the kitchen or bathroom. Any hostess will quickly post a variety of jars with seasonings, croups and other kitchenware, and in the bathroom such a shelf near the mirror will allow all the means of hygiene and free the necessary boxes. It is worth noting that the data of the premises have a fairly high level of humidity, which means that the tree will need to additionally handle with antiseptics and apply at least two layers of paint. The optimal option will be plastic or glass, as they have a greater number of advantages:

resistant to moisture and temperature drops;
on the surfaces do not appear mold and fungi;
withstand a lot of weight;
easily cleaned;
a variety of colors will fit the design to any interior.

Also, the angular shelves on the wall are a rational option that is suitable for bedrooms, children's and living rooms. Under the shelf can accommodate any other furniture, for example:

bedside table;
computer desk;
armchair.

Regardless of which material was used, the design will look spectacular and presentable. On the angular shelf, all sorts of little things will be comfortable: books, photos, dishes, candles, toys and more.

Note! To add an angular shelf of a larger effect, you can spend the LED backlight to it. With this method, designers give the wall depth.

Necessary materials and tools

Before proceeding to planning and making, it is worth collecting available materials and calculate: whether they will be enough? Make an independently angular shelf can be from a wide variety of materials, for example, such as:

wooden boards;
plywood;
glass;
plastic;
subooled profiles;
iron and others.

The first 4 options are considered the most common and practical. Each can cope with them, besides, a special tool will not be required, as in the case of glass or iron. A set of tools in each case will be diverse, but if we talk about lumber, then you should prepare in advance:

hacksaw;
lobzik (manual or electric);
saw
stationery knife;
drill;
sandpaper;
glue and fasteners;
line;
pencil;
paintwork materials (paint or varnish);
tassels.

Note! For comparison, when making an angular shelf from glass, it will take less tools: fasteners (self-tapping and dowels), level, drill, felt-tip pen and line.

Step-by-step instruction

The role of the main material is suitable for the usual board, which remained from repair. Width should be chosen individually, based on their items that will be placed on it and the place where it will be installed.
In addition, it will take adhesive with a dispenser and screws (3.0 × 25 mm) for attachment. As decor you can use semicircular sections.
Apply the markup at the angle of 45 ° by the required length and with the help of a hacksaw cut at an angle of 45 °. As a result, we get 4 shelves.
From the balances of the board you need to cut the racks of the same size (for example, 5 × 20 cm) in the amount of 6 pieces.
All items should be cleared with sandpaper to perfect smoothness.
We proceed to assembling the design. To each shelf, except the top, it is necessary to fix two racks. Marking is applied in the middle, then elements bonded with screws. To enhance fasteners, use PVA glue.
For the convenience of fastening the rack, the middle shelf is placed around the edges.
Similarly, the other parts of the angular shelf are collected.
If you wish and the availability of free time, the shelves can be reappeted using semicircular sections. So, with their help you can make low handrails so that small or round accessories do not fall out. At the finish stage, the shelf is painted.

Note! After the first element was cut, it is necessary to post it against the wall and check the correctness of the calculations. In order for bonding the board does not burst, the screw for the screws is drilled a little smaller size than screws.

Glass Corner Shelf

To make a small and simple design, you will not need a lot of time and special skills, even if we are talking about glass shelf. So, to be accurate and manufacture the design of the right dimensions, it is necessary to make measurements. After that, on paper, depict the scheme with the indication of all received parameters.

Cutting glass can be performed independently if there is no tool - then go to a special workshop. Here the masters will be able to cut the necessary shape in a few minutes. The role of holders can act:

metal bars;
aluminum profile;
wooden frame.

In the perfect version it is worth buying special holders to which the screws will go and dowels for bonding. The holders are fixed on the wall and put the glasses alternately. With the help of the construction level, evenness is checked. As a result, the cost of the shelf will be lower than the cost of a new from the store.

Note! For convenience, experts recommend creating a template of a future shelf of cardboard. This will avoid inaccuracies.

Only with the exact observance of the data obtained after measurements, you can make a high-quality and reliable product, in particular, the angular regiment. It is very important to measure the measurement between the walls, since this angle is not always equal to 90 °. As a basis, you can take a variety of materials that are dusting in a barn or garage.

Corner shelves allow you to save space, so such a designer solution is a find for small areas. This element of furniture can be made independently, because this does not require special knowledge, expensive equipment and a large amount of time.

Selection of material and shelf tools

The angular regiment can be made of various materials. Consumers often make a choice in favor of chipboard, MDF or plywood. Another option may be the bottomhole profiles, as well as glass.

The choice of tools depends on the material from which it is necessary to create the shelf with your own hands.

So, for wooden models it is worth it:

lobzik electric;
hacksaw;
saw with small teeth;
drill;
glue;
rake to create a circulation and a circular with a large radius;
wooden rail for the basis of the design.

If the angular regiment is masked from the bottomhole profile, then it is necessary to purchase the following tools:

drill;
hacksaw;
level;
self-tapping screw;
rake to enhance the rigidity of the edge;
glue "moment";
cable Channels.

The smallest number of tools is required when you need to make an angular glass shelf:

a set of holders for glass shelves (there are already self-tapping screws and dowels);
level;
drill.

When all materials and tools for performing work are collected, you can start creating the shelves.

How to make an angular regiment?

Shelf of glass

To make such a shelf, you need to perform the following actions:

Cardboard creates the shelf template.
Cutting and processing glass can be performed both at home and in a special workshop. But it was the pro will produce all work at a high level, and the consumer will have the opportunity to choose the most suitable material.
The holders are purchased.
Next, you need to wear a shelf on one of the holders, applied to the wall and with a pencil outline the upper limit of its fastening.
The first holder is attached, for this, the auto-dowel and dowels are used.
The glass is inserted into the first holder, fixes and put on the second. Using the level you need to align the shelf. Mark the pencil of drilling places.
Fastening the second holder.

This is so simple way to make glass shelves at home.

Stone Shelf

The shelf can be given any form, however, you should always remember the direct corner of the foundation that will be attached to the wall.

In order to build a shelf, follow the instructions:

Material is placed.
With the help of the knife cuts the shelf.
Next, with the help of a special rail, which coincides with the profile in thickness and length, the framework is enhanced. To do this, it is necessary to put this material for the glue "moment" and consolidate it to the edge of the profile.
Holes drilled in the already glued rail.
Self-tapping screws are rushed into the wall under the already drilled in the shelf of the hole. During operation, the level is used.
Open designs are hidden behind the cable channels chosen. They are planted for glue.
The shelf is fixed on self-drawing.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile will easily turn into marble.

Shelf of chipboard (plywood, MDF)

Fastening such shelves is made in several ways. The first is the nozzle on the longitudinal rack-foundation, the second - in fixation in the slots of the transverse basis.

The first way is good because there is no need to drill neither tile, no walls:

The shelf is cut out of the chipboard. To do this, with the help of a circulation, you need to draw a circle, divide it into 4 parts and cut each electrolovka or hacksaw.
On the rake-based marks the locations of the shelves and the size of the required groove. The billets are applied to the rake, and their width is fixed.
Small-grained saws are made cuts to the depth of the middle of the rail, and an unnecessary element is extracted with a knife.
On the shelf at the corner base, the site is scheduled to be cut off. By area, it is equal to the depth and width of the groove in the rail.
Small-raised saws on drawn marking needs to be made and remove an unnecessary element.
Next, the shelves are grinding, and the entry into the grooves is checked.
With the help of glue, the rail must be fixed to the wall, fasten with scotch and leave at least an hour.
The shelves are inserted into the already fixed rail without any other fixation.

Such a simple way can be made of racks for a living room, bathroom, kitchen, etc.

To make the shelf in the second way, it is necessary to manufacture the grooves first, and only then take for the main element:

In two bars, the length of equal size of the sides of the shelves, with the help of a circular saw, the grooves the required width is generated.
These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their hats are completely recessed.
The angle is carefully measured. Measures are transferred to the material where the shelf circuit is drawn.
An element is pumped up using a jig or filling.
For faces, a special tape is used.
When the shelf is fully ready, it is inserted into the grooves.

Only a few hours, and the beautiful decor element is already in place!

Creating a shelf with your own hands, the master takes into account everything: their ideas, interior, features of the angle, where this subject will be.

In order to rationally use the space in small rooms, there is one pretty good option - a wall-mounted corner regiment. The possibilities of its application are very broad. For example, such shelves are often used for icons, books, various awards and so on. Do not forget about the kitchen. Here, such a shelf can be installed under the TV of a small size. In addition, in the bathroom or bath it allows you to store bath accessories. This option is beneficial primarily for the possibility of saving space. Also popular and corner shelves for shoes.

As you can see, the use of such furniture is found in any room. The easiest thing, of course, buy an angular shelf in the store, especially since there will be no problem with the choice. However, there is an alternative option - make it with your own hands, from plywood, fiberboard, or even from the girlfriend. No special knowledge and skills require such work. The main thing is to just want and, of course, clearly understand what you need.

Corner regiment - how to make it with your own hands

So, let's consider in more detail what options there are options. First of all, we need to decide on the material. Corner shelves can be made of:

plywood;
plasterboard;
subooled profiles;
glass.

In the last case, the cropping material is best done in the workshop. After all, it is very difficult to do this without the lack of relevant skills. It will also be necessary to acquire special holders. It is first recommended to draw a drawing of the shelf, which you are later installed. The assembly itself will not deliver special hassle, because the material is already cut. On the wall holders are attached with the help of self-tapping screws. Do not forget that the shelf must stand smoothly, so you will need a level.

It is often quite often for the manufacture of angle shelf at home is used by Paneur, MDF or chipboard. You can fasten them in different ways - landing on the longitudinal or fix in the slots of the transverse basis. The first option is simpler because it does not need to drill the walls.

First, draw a drawing with accurate sizes. Next, we need to cut the shelf itself from the selected material. To do this, we draw a circle on its surface and divide it into 4 equal parts. Here you will need a circulation, ruler and simple
pencil. Next, cut out each of these 4-parts using a hacksaw or an electrolovka.

After that, you need to take a rack-foundation and place it. In particular, it is necessary to specify the size of the groove, as well as the location of the shelves. The most optimal depth of cut - about the middle of the rail, no more. Next, we plan a plot that we will cut on the shelf itself - this is done at the corner of the ground. It should be noted that its area should correspond to the width and depth of the groove made by us earlier in the rake. Cooked both in the first and in the second case, it is better to do a saw with small teeth. We check how the shelf is included in the bases of the base, and if necessary, eliminate the flaws.

Next, we need to fix the rail on the wall. This is done with glue. After that, the rail is better to further consolidate with scotch and wait for about an hour. We need the glue reliably grabbed. During this time, you can engage in grinding the shelf itself. Here you need to make a slight retreat. If you use untreated wood, then immediately before installation, all parts of the shelf must be covered with paint or varnish and wait until they dried out. After that, you can already start the installation. In such a design, the shelf is simply inserted into the rail. No additional fixation here is not needed.

If you have chosen the option with a transverse basis, the sequence of actions when collecting the shelf will be somewhat different. In particular, first of all it will be necessary to make grooves, and only after that you should start working on the main element. So, we take 2 bars, the length of which corresponds to the size of the parties of the future shelf. They need to cut the grooves we need width. The easiest way to do it with a circular saw.

Next, we need to consolidate these items on the wall using self-tapping screws. After that, measure the angle and transfer the values \u200b\u200bobtained directly to the material. On its surface, we need to accurately draw the outline of the future shelf and cut each element. The faces are decorated with a special tape. In fact, we have already reached the finish line. It remains only to insert the finished shelf in the grooves.

A rather popular material for the manufacture of angular shelves is the bottomhole profile of PVC. Immediately it is worth warming that in this case it is necessary that the angle is really direct, that is, exactly 90 degrees. The thing is that customized this material under uneven walls is quite difficult. If the corner is straight, then you will not have any problems with the manufacture of angle shelf from the bottomhole profile.

We place the harvested material and cut out over the drawn circuits. In this case, it is best to use the hacksaw. Next, we enhance the rigidity of the edge of the workpiece, while incurred in the size of the wooden rail with pre-drilled holes under the solemn. Here you can use any glue suitable for connecting these two materials. By the way, fix the shelf on the wall can be both with the help of self-tapping screws and coal fasteners. Which option to choose - decide for yourself.

We have another unresolved task. After all, one end of the angular shelf remains open and spoils the entire appearance. The problem is solved simply - with the help of a cable-channel corresponding thickness planted for glue. It should also be noted that our regiment will be white. Of course, this is a kind of universal option. However, many other color solutions want many. Special self-adhesive film will help us. There are any colors for sale, so you can easily enter the shelf in the interior of the room.

The problem of free space is always relevant, this is especially true of small apartments. What if you want to place your favorite books or children's crafts? Angle shelves will be out.

Always always in the apartment there is an unoccupied free angle, which perfectly passes the rack or a small shelf. This will make it possible to release a little space, and also add a new decorative element.

Materials for the manufacture of shelves

It is difficult to find a house or an apartment in which there is no shelves. It is convenient for them to decompose personal care of personal hygiene in the bathroom, place books, flowers, kitchen utensils or small crafts and trinkets. The angular position provides great opportunities for designer fantasy when creating various shelves configurations.

The angular shelves due to the design are able to save the space of the apartment and at the same time aesthetically decorate the corners.

Today it is possible to choose an angular shelf on the wall for any room. Specialized stores are ready to offer a wide range of forms and structures from various materials. But the cost of such shelves is not always suitable for each of the potential buyers.

Traditionally, it looks traditionally a wall of wood. It can be performed in the style of minimalism, but still will remain attractive.