Cement chandeliers show please. Spectacular loft style lamp with their own hands. Step-by-step master class with photo. How to make a concrete lamp

For the manufacture of the original lamp with their own hands, we will need:

1. Cement + sand.
2. Electric wire and cartridge
3. Plastic bottle made of mineral water on 2 liters and more thin by 1l.
4. Tube with carvings and nuts. This tube can be purchased in lighting shops, or get from the old chandelier.
5. Selflessness

Initially, it is necessary to choose plastic bottles from undermines or any other drinks. The bottle of 2 liters will serve as an external form of the ceiling, so if a bottle with different embossings, they are imprinted on the lamp. A 1 liter bottle must be chosen without embossed (smooth), but such a diameter so that an energy-saving lamp can fit inside.

After they decided on the choice, cut off the bottom of the 2 liter bottle.

In the covers, drill holes for a metal tube

Nuts roll the covers on both sides so that they keep in place. The distance between the lids should be two more than the distance between the walls of the bottles.

Use self-tapping screws to secure the form.

Prepare a cement solution (finished cement-sand mixture or sand cement in a 1: 2 ratio) and fill out the form. Concrete, under consistency should be thick, then the surface of the lamp will be smooth. If the solution is more liquid, then many small shells will appear on the walls.

It is necessary to take into account when the solution is more dense, it may be loosened, and emptiness will form. Therefore, it is necessary to ram with a solution with a wand, after each swelling. You can use the primed vibrating means (handmade massager, etc.). After the solution is covered and tamped, you can unscrew the screws and once again gently tumble so that the center is not disturbed.

After the cement is dry (1 week in the shade), remove the bottles, only the act must be neat, because cement, still fragile and easily damage the front part.

All the edges of the lamp process the sandpaper.

It remains only to connect the cartridge to the lamp. I want to note that hanging the ceiling on the wire is very risky, and sooner or later the wire can be transferred under weight. Therefore, I recommend using a decorative chain for hanging.

Decorative lamp made with your own hands, ready to decorate the interior.

You can do two-color lamps. For this purpose, cement solutions from white and gray cement are prepared in different tanks. After that, they are mixed with each other for a few seconds (but not allow mixing to a homogeneous color), and is poured into forms. Additionally, you can use colored dyes for concrete on the technology of marble from concrete, and make bizarre patterns.

Good luck to you in your work.

Glass, concrete and LEDs in this product are combined to get a modern, original and stylish lighting element that will become an excellent interior addition. Details of the process of its manufacture in the given master class.

Materials
To make a LED lamp with your own hands, prepare:
lED garland;
glass cylindrical vase 26.5 cm high;
PVC pipe;
concrete mix;
Fantasy saw;
Thermopystole and hot glue sticks;
Food film;
isolent;
hacksaw;
stationery knife;
drill;
Grinding machine;
plastic bottle;
foam adhesive tape;
nail;
A piece of plywood or wooden board.

Step 1. Cut from PVC pipe a piece of approximately 13 cm high with a height. It will be a form for the concrete base of your lamp. Adjust it yourself alone. The diameter of the pipe for this project will depend on the diameter of the vase you have taken. Detail does not need to handle PVC, it will become the outer wall of the form for a concrete base.

Step 2. From concrete to make the cylindrical base of the lamp with a blank recess inside. For its manufacture, you will need a small plastic bottle that needs to be trimmed in a height of about 2 to 3 cm below than the outer part of the form.

Step 3. In the upper part of the concrete base, the lamp should be a small rim, to which the vase will be installed. To make it rush from the inside of a piece of prepared PVC pipe foam adhesive tape.

Step 4. Cover the bottom of the form, cover the food film and fix it with a tape.

Step 5.Instruct the concrete mixture with water in the ratio indicated by the manufacturer of the mixture.

Step 6. On a piece of plywood, put the prepared part of the pipe. Right in the center, put it inverted upside down, cropped and empty plastic bottle.

Step 7.Gradually, start pouring a solution of concrete into the form. Periodically knock on the PVC pipe wall with a rubber hammer so that the parts of the solution settled to the bottom and did not rise. As the material fills, the plastic bottle can be pushed up. Take a nail and lower it to the bottom.

Step 8.Take the grinding machine and use it to create vibrations, for shrinkage of a concrete solution. During this process, continue to keep the bottle of the nail.

Step 9.Leave the whole design until complete drying. This process can take several days.

Step 10. The resulting concrete base for the lamp you need to get out of the form. To remove the concrete layer from the bottom of the bottom part, gently knock on it with a hammer.

Remove the form will be easy if you have previously smeared it with oil. If concrete you poured into an unprepared form, make two small cuts on it with a hack or saw, and remove the PVC part.

Step 11. Collect the harvested workpiece with sandpaper or grinding machine using a granular cavity nozzle.

Step 12. At the top, drill the hole to turn it into it the wire connected to the fork or another power source. From the bottom of the bottom, make a small groove under the wire. So the base of the lamp will stand on a flat surface steadily.

Step 13. Credit wire into the harvested hole and fix it in it using hot glue.

Step 14.Connect the LED garland to the wire. Carefully send it to the vase. This is pre-wrap the product to any cylindrical subject. Cover the concrete base with an improvised glass cap.

Concrete lamp is a stylish loft accessory who will make an apartment unique, especially if it is done with his own hands. To date, various famous design brands offer interesting solutions of suspended lamps made from concrete. But such things are usually too expensive, or difficulties arise with their delivery. Therefore, we suggest you make such a loft suspended lamp made of concrete with your own hands. All that this will require: two plastic bottles (one large, the other smaller), a liquid cement mixture with sand and water, a small metal tube with an outer thread, four wood screws and an electric wire connected to a cartridge and a light bulb. On the very bottom, there is nothing difficult in moving the lamp from concrete with your own hands. So, proceed.

Step 1. Drill the assisted in the covers of both plastic bottles with a diameter of the metal tube.

Step 2. Cut the large plastic bottle into two parts with the help of a stationery knife and scissors. This will be the main form, the so-called "matrix" for our concrete lamp.

Step 3. Curtain the metal tube through both covers of bottles. Use nuts to fix bottles by screwing them on the tube.

Step 4. Secure plastic bottles with each other using wood screws.

Step 5. Prepare a liquid concrete mix of the desired consistency.

Step 6. Then, in the resulting form of two plastic bottles, fill the cooked mixture of cement.

Step 7. After concrete hardens, unscrew the locking screws and remove the extra parts of the plastic form. Optionally, you can deploy sharp corners using emery paper.

Step 8. Insert the electric cord into the hole of the metal tube, which turned out to be fixed in the concrete base.

Step 9. One end of the cord is connected to the cartridge with a light bulb, and the other to the electric fork.

Everything. Our stylish concrete lamp is ready.

Also add a video with a detailed description of the process of manufacturing a lamp from concrete in English. If desired, you can experiment with various forms of plastic bottles and the composition of the concrete mix.

Among the homemade craftsmen, the most popular consumables is concrete, from which you can make a variety of a variety of interior items, for example, a decorative lighting device. This building material is quite convenient in use, while inexpensive. Luminaires made of concrete are quite heavy, but it does not affect their functionality. Such decorative products are perfectly suitable for any design solutions when designing the interior of the premises.

With the help of a concrete solution, designers create interior items of a wide variety of forms, paint and decorated with additional accessories, give the product shades of gold, silver, copper and others.

It is important to note! Concrete illuminators of handmade experienced designers are quite expensive. Therefore, not everyone can afford to decorate their home with such an exclusive interior item.

In order to save your home budget, you can independently make such a lighting item.

In this article:

Concrete illuminator with their own hands using the package

Before you begin to make a cement-building lighting device, it is worth pre-prepared for this event - to collect all the necessary consumables and tools.

For the manufacture of a concrete lamp, the following materials will be needed:

• Milk cardboard package (the more the illuminator is needed, the larger the volume there must be a package).
• Plastic bottle for placing light source (light bulbs).
• Dry concrete mix.

Step-by-step instruction of the manufacture of the lighting device

Step 1

It is necessary to free up a package from under milk and trim its bending edges.

Step 2.

Further, a plastic bottle is inserted into the box and through the through hole will be drilled. To conveniently do it, it is recommended to pre-with a nail or a knife in these places to do small holes.

Step 3.

Insert a bolt and secure it to secure it.

Important! Concrete lamps must have a fairly sealed case. He should not pass moisture. Therefore, the plots of pillars of the package with the bolt are necessarily embarrassed by the sealant.

Step 4.

Preparation of cement mixture in accordance with the instructions from the material manufacturer. In this case, the main thing is not to add extra water. The finished solution should resemble the dough, kneaded for cookies. At the same time, the mixture should be thoroughly mixed so that there was not a single dry grain.

Step 5.

The free space between the bottle and the package is clogged with a concrete mixture (it is definitely well pressed - there should be no hollow plots). To get rid of the bubbles formed with air, the workpiece must be carefully shaking.

Important! Immediately wash the container in which the cement mixture was preparing, otherwise, when it grabbies, it will be quite difficult to remove it.

Step 6.

We need a product to give time to dry - the concrete must take good, that is, the whole moisture should come out of it. To do this, you may need about two days. After that, the box from the milk is removed, the bolt is twisted.

Step 7.

In the obtained billet from concrete for the illuminator, you need to drill holes of one or different diameters.

Step 8.

The light is placed inside the housing, the wiring is made, the connection with the switch is made.

A unique lighting device from concrete is ready for operation!

Concrete illuminator with their own hands using plastic bottles

No less unique are lamps from concrete, made on the basis of two bottles of plastic of different volumes.

Consumables

• Two plastic bottles of different sizes.
• Light source.
• Cartridge with a cord.
• Cement mix.

Tool

• Electrock with drills.
• Self-tapping screws.
• A sharp knife.
• Thread tube.

Instructions for the manufacture of a decorative lamp

Step 1

Cuts the bottom of both bottles, a hole is drilled under the thread tube. On both sides on the tapping screw and the nuts, a bulb cartridge is fixed.

Step 2.

The cement-sand solution is mixed, they are filled with the base of the product.

Step 3.

After complete drying of the concrete plastic is removed with a knife along with self-draws. With the help of sandpaper on the obtained concrete blank, all irregularities are removed.

Step 4.

Bulb connection using an electrical cord with a switch.

A unique illuminator is ready! Such luminaires made of concrete made by their own hands will help to embellish any room!

Original table lamp

To make such a miracle, you need to prepare a clean small plastic bottle with a handle, a cartridge with a wire and sandbetone in proportion of 1: 3. Just do not make the concrete too thick, it will not be registered normally in this state. It is better to add plasticizer for better plasticity.

Before molding, do the hole in the bottle for the wire, as shown in the photo. Passe it along with the cartridge and accurately complaint concrete. Here the wire goes through the canister handle. For the platform, cut the plastic canister and carefully pull the resulting lamp. If desired, the appropriate lampshade is desired.

Ready lamp without lampshar

Create a lamp on your own

We will proceed to the manufacture of a lamp from concrete. Our instruction describes only the principle of work, and forms can take what your soul you want.

Classic concrete lamp

Concrete lamp in kitchen interior

To create such a lamp from concrete We will need:

• As a form, the lampshade from "IKEA" was used, for itself can take absolutely any shape. But note that, most likely, after the fill, it will not be suitable for anything, and it will have to throw it out.
• Special cement mix for modeling. But on the expanses of the post-Soviet space, it is difficult to find it, so you can take ordinary cement, and fine-flow sand. Yes, and the price of homemade solution is much lower than a special cement modeling mixture. Optionally, you can add a plasticity plasticity and pigment.
• Polyethylene film.
• Cartridge.
• Emery or sandpaper. But it is best to get a manual grinder with a disc on concrete.
• Metal cap from chandelier.
• Transparent building glue or liquid glass.
• Screwdriver and pair of self-tapping screws.

The manufacture of the lamp is conditionally divided into the following stages of work:

1. We spend the future formwork for concrete from dust and dirt.
2. Cooking a concrete mix.Exemplary proportions of cement and sand 1: 3. The amount of water with a plasticizer (or without it) should be so that the mixture is in consistency as in the photo.

Attention! All concrete works in gloves. Best if they are supplied from the respirator and safety glasses.

Concrete is much dried with skin, and cement dust is not output from the lungs.

Consistency of the working mixture

1. Gently and evenly apply the resulting solution on the inner side of the formwork.

Application of concrete

1. Now it is necessary to dry concrete well.To do this, tightly cover the form with polyethylene, and after a day you can try to reciple. If the concrete will be pulled out bad, leave for a couple of hours and try again.

Drying of concrete plafmon

Forming Product

1. With the help of grinding, bring the resulting lamp to a neat state.

Grinding concrete

1. I will postpone in the direction of the plander and take the second part of the lamp.Customize the metal part from the chandelier under the resulting concrete product and install the cartridge in it. If the idea arose to leave one cartridge - drive it away. The bulb cartridge simply will not stand the weight of the concrete lampshar.

Mounting design lamp

1. Insert the resulting system of fastening and lighting into the ceiling, we mount everything on the ceiling and enjoy the result.

Ready lamp

Attention! If you do not have a suitable form for a ceiling, it can be created independently of thin plastic. It is cooked from all sides of cement paste (cement + water), dries and the finished lamp is obtained.

Plastic concrete lamp shape

Lamp in the garage style

The video in this article will tell in detail how to make such a lamp on its own.

Floor lamp

In the image and likeness of the previous master class, you can make a lamp of an interesting round form. A dense air ball will act as a formwork.

It just needs to be deceived by cement mortar, but not the latter and not solid layer. So the ball simply will not stand the weight of concrete. We wait until the layer is dry, piercing the ball, insert the plane and admire the wonderful suspended lamps.

Lamps from Sharikov

Luminaire projects choose the model in the shower

Such products will also perfectly fit into the landscape of any subsidence, giving him lighting, and decorating with its bizarre forms. The most remarkable product from concrete is not only the fact that from it you can create the most unimaginable forms, but also the fact that they will delight the eye of any dozen years old.

And the concrete has an excellent feature of good workability. Everyone, if desired, armed with non-hard materials and a violence of fantasy, can create a unique project worthy of modern exhibitions. In our publication, we collected simple and interesting ideas of lamps from concrete made by their own hands.

Concrete is a unique material. From it you can cut out anything, to apply an interesting texture or stick to the brilliance and paint. It all depends on fantasy and preferences.

As you can see, the form of concrete lamps can be different. A little diligence and in life, even the smallest of your fantasy is incarnated.

Concrete lamp

Such products fit perfectly into the general type of garden sites. In addition to its main lighting function, they perform the role of a decorating element. Following the further recommendations described, these lamps can be quite possible to make themselves. First you need to make a formwork. The material for it serves as a sheet of plywood whose thickness is 12 mm.

When creating a form, it is necessary to ensure the possibility of its light parsing. The foundations of the base are desirable to cover with varnish, which will then disconnect it from solid concrete. Multiple varnish coating will allow finished products to gain shine and flicker. The wiring of the concrete lamp can be organized with the help of foam or corrugated pipe. The most optimal is the first option, at the expense of which the mass of the lamp is significantly reduced, and concrete costs are reduced.

Garden concrete lamp

For foaming foam, glue is used. In addition, another advantage is the simplicity of material removal. In the event that fragments remained, the disposal of which is difficult, it is recommended to use acetone that fully solvent foam. The next step is to create a formwork inside the product. For this purpose it is possible to use both plywood and cardboard.

The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezium, which will ensure the ease of its removal. Fontoam grooves for wiring are laid in the openings. As a cement mixture, the use of both finished and manufactured independently is allowed.

When selecting the second variant, the M-500 cement is used in combination with sand (one to three ratio). The additive can serve as gravel or crumb of granite (one part). Diluting the mixture, it is necessary to achieve a sand dough consistency. At the next stage, the concrete is laid in the formwork. First of all, it is recommended to fill out hard-to-reach places, and then the rest of the space.

concrete lamp for the garden do it yourself

To make the mixture more tightly, a vibrational grinding machine should be used. The product filled with a concrete mixture should be covered with a plastic film with a polyethylene film. This will exclude the possibility of water leakage from concrete, as well as give it strength. After solidification, the formwork is removed, the lamp is grouped, and the lamp is installed.

Such a material as concrete today applies not only for construction purposes, but also to decorate the interior, representing an original and stylish decorating element. The main advantage of the above-described concrete lamps is not only an unusual design, but also simplicity of self-making. In addition to the lamps due to the ability of this material, various forms are created a variety of vases, tables and chairs, flower pots.

Lighting device using bottle

Suspension lamps from concrete are not less popular. This device is easily manufactured independently. For this purpose, such materials are used as a sand-cement mixture, which has in its composition gravel, water, a network source, electric shuffle, selflessness (designed to work with wood), a pair of plastic bottles (different sizes), a bulb cartridge, and additional devices : Knife, drill, carving tube. First prepare bottles. To do this, cut them down their bottom and drill holes for the carving tube.

The bulb cartridge is fixed with nuts and screws on both sides, so the base for the lamp is considered prepared. The next step implies the preparation of the cement-sand mixture, after which it must be fill in the base (using a spoon) for the lamp, slightly pressed. This method of laying concrete contributes to the removal of excess air, and also provides a uniform distribution of cement.

When concrete becomes solid, plastic is removed using a knife together with self-drawing. The uneven surface of the concrete must be treated with sandpaper, which has a grain value of 120. The last step is to connect the cord to the light bulb and to the voltage source. Considering the mass of the concrete product, you should make sure the strength of the attachment.

Step-by-step instruction of the manufacture of the lighting device

Step 1

It is necessary to free up a package from under milk and trim its bending edges.

Step 2.

Further, a plastic bottle is inserted into the box and through the through hole will be drilled. To conveniently do it, it is recommended to pre-with a nail or a knife in these places to do small holes.

Step 3.

Insert a bolt and secure it to secure it.

Important! Concrete lamps must have a fairly sealed case. He should not miss moisture

Therefore, the plots of pillars of the package with the bolt are necessarily embarrassed by the sealant.

Step 4.

Preparation of cement mixture in accordance with the instructions from the material manufacturer. In this case, the main thing is not to add extra water. The finished solution should resemble the dough, kneaded for cookies. At the same time, the mixture should be thoroughly mixed so that there was not a single dry grain.

Step 5.

The free space between the bottle and the package is clogged with a concrete mixture (it is definitely well pressed - there should be no hollow plots). To get rid of the bubbles formed with air, the workpiece must be carefully shaking.

Important! Immediately wash the container in which the cement mixture was preparing, otherwise, when it grabbies, it will be quite difficult to remove it.

Step 6.

We need a product to give time to dry - the concrete must take good, that is, the whole moisture should come out of it. To do this, you may need about two days. After that, the box from the milk is removed, the bolt is twisted.

Step 7.

In the obtained billet from concrete for the illuminator, you need to drill holes of one or different diameters.

Step 8.

The light is placed inside the housing, the wiring is made, the connection with the switch is made.

A unique lighting device from concrete is ready for operation!

Concrete lamp using package

Before proceeding to the manufacture of this type of lamps, it is necessary to prepare the following materials:

• milk box. An important condition - the package should not pass moisture, otherwise the concrete is lost its strength. The larger the lamp is planned, the larger the package should be selected;
• a bottle of plastic in which the light source should be placed;
• dry mix for concrete.

First of all, you should get rid of the bending edges of the packaging and install a plastic bottle into it. Next, you need to drill holes in the resulting design. To facilitate this process, it is recommended to make holes in these places in advance using a nail or screwdriver. Then the bottle should be fixed using a bolt, traveled through the drilled holes and consolidation.

To preserve the moisture resistance of the packaging of the connection site, it is necessary to handle the sealant. Thus, we get the foundation where concrete will be poured. The dry mixture is divorced by water according to the rules described in the instructions for it. Here the main thing is to prevent excess fluid.

The consistency of the finished solution should be similar to sand test. Therefore, water should be poured gradually, with each particle of the mixture should be wet. After cooking, concrete should be embedded in the previously made shape, tightly pressing enough, thereby eliminating the formation of empty seats. For a complete drainage product, the package must be carefully shaking.

All tools after use you need to immediately wash, otherwise the concrete mixture will grab that it will make it removing almost impossible. After two days (so much requires that concrete hardened) from the package should be rid of, and bolt to unscrew. To give the concrete lamp originality, it is recommended to make additional holes in it. This will help dispersing the light flux. The light source is placed in the plastic bottle, which is then connected to the switch. The finished device can be placed both on the wall, and hang under the ceiling.

Step-by-step master class with photo

1. Cut the bottom of the greater bottle.

2. Drill a drill or make other ways to open the lids. It is more convenient to work when the covers are dressed on the bottles. Remember that the holes should be located strictly in the middle so that the thickness of the plaffron is the same on all sides. The hole must have such a size so that the tube is free to pass into it.

3. Secure the tube on the bottom of the bottom bottle.

3. Attach the top bottle.

As a result, you should get this design:

4. Refix on the sides of the bottle with screws. This will avoid displacements.

5. Prepare a concrete mix. Fill the form. During work, do not forget to shake the bottle to provide a dense adjacent concrete. Also, it can be raised with a wand.

Council. If you want the surface of the lamp to be smooth, use a thick concrete. Liquid consistency will help create an unusual surface effect covered with sinks.

Council.To pour concrete more conveniently, you can install bottles on a tin jar (as shown in the photo below).

6. After the concrete is tamped, you can remove the screws and spend the trimmer, pressing on a smaller bottle. Observe accuracy so that the center does not shift. Form the edge.

Council. The edge can be both smooth and asymmetric.

After the partial drying of the concrete (depends on the brand used), you can carefully remove the bottles. Do not forget that at this time the lampshade fragile and it is easy to damage it

8. Align small flaws of the surface with sandpaper.

9. Clean the wire with a carton in a ceiling, connect the system to electricity

.... And enjoy the result.

Council. If you do not like the protruding tube, you can cut it with a hacksaw.

In preparation, the master class is Ben Uyeda.

Candlestones

In the case, the ordinary cardboard box from under milk

You can play with forms and size products

To create original crafts, absolutely any techniques will be useful - coins, adhesive tape, plastic cups, baking molds (found on Sayyestohoboken, Signepling and Naver).

Used bottom plastic bottle

And then the master found the use of a simple tin can

A little fantasy, and here you have an original thing

Stylish lamp made of concrete with your own hands

Italian designers have already long delight buyers with interesting things made from concrete. They like to take the material like concrete, whose application is strongly limited, and use it in a non-standard way. We suggest you try to make your stylish luminaire made of concrete with your own hands.

Materials:

• Quikrete 5000 concrete mix is \u200b\u200ba mixture of stone or gravel, sand and cement, which is characterized by excellent strength. To mix a small amount required for this project, simply add water and stir.
• Socket
• Switch
• Two plastic bottles (from a two-liter bottle and a small bottle for floor liters)
• Thread tube (can be purchased, or take from the old lamp)
• Self-tapping screws
• Drill (for drilling holes)

INSTRUCTIONS:

1. Prepare plastic bottles. We take the knife and scissors, cut off at the bottom of the bottom.

2. Drill a hole in bottles covers. The easiest way to drill when the plug is screwed into the bottle. The hole should be sufficient so that you can insert a carving tube.

3. Insert the tube into the resulting holes. Use nuts on both sides to fix the position.

4. Hound the resulting design on the bottle.

5. Use screws to stabilize bottles.

6. Mix the concrete. We use a large spoon for filling the space between the walls. After each spoon, we shake the bottles and slightly compress to make sure that the mixture is evenly distributed.

7. Remove the bottles. As soon as concrete thickened, we cut the plastic bottles with a knife and remove the screws. You can cut off part of the metal tube, but this is an optional step. Metal looks canceled.

8. Grind. In this case, emery paper with graininess in 120 was used to smooth sharp corners.

9. All. Finish our lamp. Insert the electrical cord into the hole of the metal tube. One end of the cord is connected to the cartridge with a light bulb, and the other to the electric fork. Make sure that the lamp is well fixed and the mount will end the load.

You can experiment with different bottles.

• Equal Bog
• What is added to the solution for the fortress
• Loft concrete plaster
• Silicate brick brick cellar
• Is it possible to make a laying in the rain
• Casting concrete
• Box for switch
• How to fill the floor in the garage except concrete
• Sealing well from groundwater
• Impregnation Color for concrete

Concrete pots for plants

Items can be any shape, different colors (found on Ruffledblog).

A few triangles joined and made a template. And already on it made this subject of the interior

And again on the creation of a pretty thing inspires the usual plastic bottle. Convenient in that it is possible to vary the height of the product

Flowers in concrete! Yes, still stylish asymmetry performed. Such a trinket is good as a gift

But examples of symmetric pots of any shapes and sizes. Looks beautiful, quite modern.

The idea to make a lamp made of concrete painted me when I designed the light in the country, and tried to create lamps in 3D style. By this you implement an excellent idea regarding the creation of three-dimensional design.

I ran into a problem how to pull out ready, the cast concrete lamp from the form you will do. The more advanced your project, the hardest will pull the finished product intact of the form. Also think about weight. You want to use concrete as far as possible, but the more subtle product is, the harder it is necessary to make a form. By the way, I do not recommend using a fane with a thickness of less than 20 mm.

The shape of the lamp from concrete must be made so that all of its parts and side can be dismantled. Sketch the sketch of the shape, slide the sizes, determine the locations of the mounts and the screeds and proceed to the manufacture.

Laccurate:

- In the manufacture of shape, all sides of the formwork should be covered with a thick layer of varnish. It creates a smooth surface that is a rack to water and which will protect the shape.

Wiring:

- It is important to schedule the wire laying. You can use polystyrene foam, having routed it in shape, pour, then drag the wire and install the cartridge

Where necessary, polystyrene foam can be glued to form, as it is easy to remove, as soon as the concrete freezes.

Preparation for shape disassembly:

- Before you get concrete, you must cover all sides of the form by any type of oil.

Concrete and fill:

- I used Sakrete and Quikcrete concretes with equal results. For my lamp from concrete, I used approximately one 80 pound bag. The cement mixer is very useful, as it will allow you to get the correct mixing sequence. It must be done so that the mixture is medium, not too wet and not too dry. As a rule, more complex forms for pouring require more liquid mixtures.

- Make sure the fill will occur slowly when you start pouring concrete. Use a small bucket or a similar container. Use your hands to check and move the concrete to make sure it gets to all the corners of the lamp of the concrete. In addition, if you use polystyrene foam, make sure that it remains on the place that is intended.

- If you use the brand of brand Oscilliating or similar, it is necessary to force concrete to vibrate. Vibration improves concrete fluidity and helps filling out emptiness / air holes that could be in casting. You can notice that the concrete decreases slightly, which is a sign that the emptiness was filled.

- When the form is filled, cover it with a plastic film to hide it during the day or two. If you want to give a fixture from concrete additional strength, it is necessary that the concrete slowly frozen. I usually try to leave a formwork for 2-3 days before trying to remove it.

Removal formwork:

- It is the most exciting, but it should be slow and carefully. Try to start with the simplest sides

Return sides or flat surfaces. This will give you a general idea of \u200b\u200bhow concrete froze. Perhaps you should allow him to stick a little longer. It will be easy to say after inspection of a flat side.

- Some sides of the formwork may need a small use of force, so have a rubber hammer and tapping slightly to force the parties to tear off.

- polystyrene foam can be removed, breaking it with a suitable tool - a screwdriver or something like that. If you are admored, you might burn it.

- Concrete will be still wet, but you can, or give time to him still caress, or start mounting the lamp from concrete and make wiring.

That's how the lamp is made of concrete! Did you think it's hard?

Decorate the garden with concrete lamps

From such a durable material, like concrete, just sin not to make lamps for the garden. The principle of manufacture is still the same: we find an interesting shape, clog the concrete into it, leave a place for the cartridge, we invoice and get a gorgeous and useful decoration for the garden.

If you have a little concrete solution left after filling the form of the lamp, do not hurry to throw out. It can be consumed with the mind. For example, make a ashtray. Pick up an interesting shape and fill it with a solution.

Concrete ashtray

Doesn't the ashtray need? Make from the rest of the concrete here is such a cute miniature flower pot.

Cotton Flower Pot

Concrete lamps are fashionable, creatively and durable. What is interesting, in some cases, especially if you already have cement, such a man-made miracle costs much cheaper than the purchase lamp. Dream, fantasize and incarnate your projects!

Luminaires made of concrete with their own hands. Master class from Ben Uyeda

Let's look to the truth, design lighting can cost considerable money. Instead of spending money on a new ceiling lamp, you can make yourself a whole set of stylish concrete pendant luminaires from one bag of concrete mix and old plastic bottles.

Concrete lamps, necessary materials:

1. Quikrete 5000 concrete mixture and its analogues (you can also try mixing various concrete colors for a 2-tone effect)
2. Two plastic bottles (one large and one smaller. Large is selected, based on the desired form of the lamp and its size. If you want the lamp to be smooth, without patterns, you need to choose a container without embossing. An excellent option can be the usual two-liter bottle)
3. Selfless
4. Thread Tube 3/8 Inch Diameter and Nuts
5. Cartridge
6. Switch and cord (because The lamp will be heavy, use good flexible cables for lifting and conveyor systems)

Instruments:

1. Scissors
2. Rechargeable drill with standard chisel diameter 3/8 inch for drilling holes in lids
3. Grinding circles
4. Cutting wires

Step-by-step instruction:

Use scissors to cut off the bottom of a big bottle.

Drill the hole in the bottle cap using a drill. It is easier to drill the hole when the covers are spinled on the bottle. The hole should be large enough to insert a metal tube.

Now it's time to connect two bottles. Insert the tube through both covers and use nuts on both sides of each lid so that they are firmly kept in place.

Then use the screws for fixing bottles.

Now prepare the concrete mix and fill out the form. We recommend using a large spoon for filling out the form. Shake and knock on the walls of the bottle after each spoon, so that the concrete is evenly distributed.

We are almost finished! It's time to remove the bottles of the form. Unscrew the screws. You can use hair dryer for heating plastic, making it softer will be easier to remove.

Credit wires and twist them together, make sure the suspension is securely fixed, connect the construction to electricity

Ready!

As it turned out, even from that, at first glance, coarse material, like concrete, you can make a beautiful lamp that will perfectly complement your interior in Loft style.

Lamps from concrete video: