Why the gas column does not ignite: causes, possible breakdowns, malfunctional methods. Repair of the gas column of Beretta: does not ignite, does not heat water and other malfunctions eliminate traction disorders

GasService company produces recovery repair of Beretta gas columns . Works are carried out by our masters at the user's home. You can find out the most accurate and complete information on parts and repair by calling the operators of our service workshop. When talking with a master of the company, the most accurately describe the malfunction, it will help you take with you all parts.

Gas columns beretta., like all gas equipment, water or heating, needs maintenance. The frequency of execution of these activities should take place at least once a year, preferably before the heating season. In winter, gas speakers and heating boilers are operated on increased parameters. If you neglect the tips of the manufacturer and not beretta Column Maintenance You can pay in the period of cold winter, comfort and comfort.

If a beretta gas column has become bad water Or suddenly disconnect, the right decision will invite our specialist who will professionally examine the unit for the presence of breakdowns and conclude about the cost of future repair.

Repair of gas speakers Beretta iDrabagno 11 I, etc.

Each master, repairing gas equipment, must be diagnosed before performing work. Troubleshooting this success repairSo we paint breakage in receipts and ways to eliminate. If you are the owner of this heating technology, then remember, the uninterrupted operation of the gas water heater directly depends on the quality of service. So if you wish to use the services of the company and implement repair of the Beretta Gas Column by the forces of professional masters - call operators.

Gas columns Beretta IDRABAGNO series - Company engineers are familiar with the design features of this series, as it is one of the "old". Available different litters and in two modifications. Equipped with a control unit with automatic ignition and spinner ignition. In the company you order the repair of these columns of the model: IDRABAGNO 14; 14i; 17; 17i.

Beretta Gas Speakers IDRABAGNO AQUA - series of columns of Chinese manufacturers. Like the entire Chinese technique, these columns need constant maintenance, and even more often in repair. The company has all the necessary spare parts to eliminate the faults. We will promptly repair these columns of the following models: IDRABAGNO AQUA 14; 14i; 17; 17i.

Beretta Gas Speakers Idrabagno ESI - Powerful gas columns operating from the electrical network. Diagnostics and repair of such water-heating equipment carry out the person's training on raising the qualifications in the study classes of representation. Otherwise, there is probability of irreparable harm to it. The service has masters that meet all these requirements.

Ignites and flies wick →
Cleaning the gas column →
The column does not ignite →
The column does not heat the water →
The column is turned off →.
Column Gasnet →.
Shoots Flash / Fitil →
The column broke →
Bad warm water →
Cotton when turned on →

Beretta column - Products of the Italian Riello Corporation. Beretta gas columns with various types of combustion chambers are presented in the global market with various types of combustion chambers: closed and open, electrical or piezo-ignition.

Among the main parts of the represented column model with piezo-ignition:

Traction control mechanism.
The nozzle of smoke removal - allows not to accumulate the smoke in the room, sending it into the ventilation.
The heat exchanger is responsible for heating the water with a column.
The ignition burner - gas is lit here.
Burner - Gas burning here.
The hydraulic valve is responsible for passing through the water column.
Temperature controller - temperature controller.
The gas valve - allows you to open or close the flow of gas in the burner.
Gas inlet - passes gas in the burner.
A gas pressure regulator providing the ability to stabilize the gas pressure entering the column during its instability.
Piezoroca button.
Economizer that allows you to choose a certain heating temperature of water, as well as, due to its functions that performs the function of gas saving.
A device for measuring gas pressure and gasket that are attached to the input of the pressure regulator.
Electrode ignition.
Thermocouple.

The column is equipped with automatic power regulation depending on the amount of water flowing through it. With the active ignition burner, the ignition and the disable equipment is automatically carried out.

1.1 Gas Column Beretta and its device (video)

2 Beretta Gas Columns Model

The assortment of the brand "Beretta" includes:

filling gas water heaters with a capacity of 11-17 and 24-27 kW;
boilers drives;
other heating equipment.

Products of this company are considered the most economical, thanks to the features of the work: the consumption of gas fuel is carried out only during water fence. The presented equipment is most advantageous in places without centralized gas supply, allowing you to save more fuel vendor every year.

IN a range of gas flowing heaters of Beretta The following models entered:

Beretta Idrabagno 11 - equipped with a piezorozhig, is characterized by a high level of reliability, due to the presence of a special safety loop. The modulating burner is made of stainless steel, which creates a smooth automated power regulation, as well as maintaining a certain temperature depending on the water flow.
Beretta iDrabagno 11i is equipped with an electric vehicle, otherwise, characterized by the same characteristics as the previous model.
Beretta IDRABAGNO 13 ESI is a water heater with an electronics with gas control and restriction of heating temperature.
Beretta iDrabagno 13 Turbo - with a piezorozhigue, is characterized by the presence of a closed combustion chamber, taking a certain amount of oxygen for burning from the street, and not out of the room.
Beretta Idrabagno 14 - with Piezorozhig, with auto-frog and lack of burning wick felt. The burner is made of stainless metal, and smooth power regulation provides the most comfortable working conditions with the device.
Beretta Idrabagno 17 is equipped with an automatic piezorozhig, independent of external power sources, is characterized by the presence of water reinforcement with an inclusion threshold of 0.2 bar, which provides the ability to operate a column in low water pressure systems.
BERETTA IDRABAGNO 17 ESI is a flow gas water heater with an electromotive and the possibility of pumping 11 l / min.
Beretta iDrabagno 17i - a gas type flow water heater with a capacity of 29.5 kW.
Beretta Idrabagno Aqua 11 is a water heater, equipped with a piezorozhig, is characterized by high reliability provided by security control, which follows stable smoke and flame.
Beretta IDRABAGNO AQUA 14 is a powerful water heater having a good heat exchanger and capable of heat 14 l / min.
Beretta Idrabagno Aqua 14i is a water heater with an electroorve and the benefits of the previous model.
Beretta Idrabagno Aqua 17 is a water heater with a piezozigig, as well as the possibility of heating 17 l / min.
Beretta Idrabagno Aqua 17i - with an electric vehicle, providing the ability to heat up 17 liters of water in a minute.
BERETTA IDRABAGNO AQUA11I-flow, gas heater with elktrodzhig, capable of heat water to a temperature of 60 degrees and a capacity of 11 l / min.

2.1 Which column is it better to choose?

Gas columns work approximately by the same principle based on the heating of the water burner, which enters the primary heat exchanger. By power, the heating columns will be divided into three categories: 17-19, 22-24 and 28-31 kW, respectively, the ability to ensure the performance of one, two or three watershed points.

In order to choose the best option, proceed from your hot water needs. It will also be necessary to take into account the duct of cold water in the dwelling. For example, if you have a duct 7 l / min., And the equipment is calculated by 14-17 or 24 l / min., In this case, the primary heat exchanger will not be able to work according to its capabilities.

Basically, the columns function to ensure the water of the singular point. Accordingly, for one bathroom there is enough column, the primary heat exchanger of which has a capacity of 17-19 kW.

Additionally, the power columns from 17 kW are with piezo (for example, Beretta IDRABAGNO AQUA 11) and an electromotive (Beretta iDrabagno 17 ESI) from the batteries or from hydro turbines.

For electric columns, the fire in the stabular is not stable (such columns are considered more economical), and they are included when setting a specific power by the regulator located on the housing. Next, the unit works in automatic mode. As soon as the crane opens with water, the stall is lit, and from it - the main burner. When closing the water, the column automatically turns off, preventing additional electricity consumption.

The speakers with the ignition from hydroturbines are not suitable for home use, because they are:

More costly energy consumption;
Need good quality pipeline (preferably new);
Perfect only with good quality water, because they can quickly fail in the weighing system;
They have expensive spare parts that will also have to wait for a long time because they are purchased to order from the manufacturer.

If the flame went out, the heat exchanger overheated or there is no gas traction, the protection system is triggered. All gas columns have the same protection scheme - the column turns off, protecting the housing of the owner from possible ignition, as well as increasing the life of the gas column.

All Beretta products are made in compliance with European standards and has certificates for ISO 9001 and GOST RF and is implemented in the market at an affordable cost. Each gas column and other heating equipment of the Beretta brand has high quality and performance performance and gets the best reviews.

How to repair the gas column "Beretta", if it does not burn and does not warm? In this article we collected the main causes of the breakdown, gave advice, how to eliminate them.

Beretta has been engaged in the production of heating equipment for 60 years. Flowing heaters are an economical way to obtain hot water, but with a long operation of the technique fails.

Main faults and repair with your own hands

Consider the main problems of the Beretta boiler, as well as ways to eliminate them without contacting the service center.

Problems with a stall

When the water heater works, the scarlet must burn constantly. If you stopped the gas adjustment knob, and the spinner does not ignite - this indicates problems with automation. The first thing to do is to overlap the flow of water and gas.

The flame in the burner occurs when the spinner heats the thermocouple. If it goes like, the protection system is triggered - the column is turned off. Otherwise, there is a risk of carbon monoxide to the room. Such a problem can provoke such fuse details:

Thermocouple.
Overheating sensor.
Solenoid valve.

Protection is triggered with rare machinery. Look, it's not time to clean the scorch: the blockage often happens in dusty and wet rooms. What points to the need to clean:

The burner is angry with strong cotton.
Flame is not blue, but with red tips.
The burner is constantly moving.

How to clean:

Discharge the gas supply, remove the casing of the column.
You will see the furtiveness, he can be scored so much.
Unscrew the handset and gas supply sensor tube.
Remove and clean the nozzle.
Rinse under running water a tee, other details.
Collect the spinner in the reverse order.

Additionally, you can check the electromagnetic valve, but it will take a multimeter for this.

Malfunctions thermocouples

Thermocouple - alloy of two types of metal, which serves to protect technology from breakdown. The part opens and closes the gas supply to the burner. When the thermocouple is heated, its plates are expanding, producing EMF (electromotive force). This force is enough to open the electromagnetic gas valve. When the heating stops, the product cools, the feed is overlapped.

For self repair you will need spare parts. Consider that different models (for example, "idrabano 11") they may differ.

Thermocouple is located next to the stall. Fastened with a nut.
Loosen the strip mount that holds the item.
Now unscrew the thermocouple nut counterclockwise.
Unscrew the contact screw. It is located on the reverse side of the adjusting handle.
Disconnect the wiring.
Install a new element.

Full range of electromagnetic valve

The valve is a coil with a rod and spring, serves as protection against gas in the room. Around the coil is a seal for better closure of all gaps. In the normal state, the valve is closed when the technique is disabled. When you start the chain and response the membrane, the control module gives a signal to the opening valve - gas enters the burner.

Replace the item is easy, it is enough to unscrew the four screwdriver fastening screws.

Thermal stuff problems

It works when overheating columns. Try to reduce the temperature in the room by opening the window. To check the fuse, you need to close its contacts with each other. If the column turns on, then it's a matter of overheating. If not, the details are replaced.

Tomb and flow heat exchanger

If the technique is bad or not at all warm water, you need to clean the radiator. Also, the pressure may also decrease, because the laid is narrowing the aisles in the snake tubes.

For cleaning you need:

Remove the housing of the product.
Drain water from the radiator.
Unscrew the fastening bolts.
Immediately clean the knot from dust using a brush. To remove scale, lemon and hydrochloric acid are used.
Run a solution of hydrochloric acid along the coil pump or watering.
Dilute citric acid in water, pour inside.
After 30 minutes, rinse everything with water.

Leave arises due to corrosion. Manufacturers try to reduce the cost of production, adding to copper for the radiator impurities. Walls become thin, warmed unevenly. As a result, progars appear. The abundance of green spots on the surface indicates an ambulance to flow.

You can eliminate an accident with a spike. To do this, use a gas burner (for thick-walled radiators) or soldering iron. Also need to solder and flux.

You can use cold welding or patch from tin. If you can no longer help, the heat exchanger is replaced.

When choosing a detail for replacement, look carefully for the new radiator to be connected or renovated.

No spark when turned on

What caused:

Problems with membrane. As we have already written, the membrane launches the gas supply valve. For this, it must be a whole and elastic. If, deformed and torn - the burner will get out or it won't be lit. Switches the rubber part to the silicone, it will last longer.
In a technique with electronic ignition. The power supply is located at the bottom of the housing. Open the lid and replace the batteries.
Insufficient cold water pressure. Turn the adjustment knob to the right and down.
Hold the Piezoroza button longer. Check your contacts: Maybe they moved away.
The ignition electrode shifted and is at a high distance from the wick. Adjust the position.
Check whether the gas crane open. If not, then open it.
No traction. Check out the guess, bringing a lit match to the window. If the flame burns smoothly, contact the utilities to clean the chimney.

These are typical faults of Beretta gas columns. Depending on the situation, other troubles occur. Clean the technique to avoid such problems.

Let's say right away, repairing the gas column, like any other gas equipment - it's solely for professionals. But, although the repair of columns with their own hands is not allowed, no knowledge is not available. The ability to determine independently, what exactly was broken than this breakdown threatens, and what could be the repair could not interfere with anyone. What are the breakdowns of gas columns, and what "symptoms" are they accompanied by?

How the gas column is arranged

To begin with, before familiarizing with the basics of malfunction diagnostics, it is not lish that the gas column is arranged, the repair will largely depend on the device. To delve into the subtlety of the device of a set of columns models will not be limited to only familiarization with the general principles.

Centralized hot water supply appeared on historical standards relatively recently. The heating of water at home was solved in various ways, but we most common we had a cumulative solid fuel heater - the so-called titanium. Tithan coal was treated, less often firewood or fuel oil. Water in the boiler needed to warm up in advance. So for the adoption of the bath I had to spend at least an hour of time. Of course, using such an appliance was very uncomfortable. The problem of rapid heating of water was solved in gas columns.

The column is accompanied by cotton

Possible reasons are as follows:

Gas pressure is too strong, the burner lights up too actively, which is why the flame breaks.
The gas pressure is too weak, the air falls inside the burner, which is accompanied by a microcus.

The burner needs cleaning and adjustment. In principle, nothing complicated, but you do not need to be taken for this job, the repair of the gas column should produce a specialist.

Low water temperature

Insufficient water heating can be associated with low column power. Do not open a hot crane in the bath, sink and in the kitchen, or buy an aggregate more powerful.

Another possible reason may be a burner zoom, as evidenced by the yellow color of the flame. Call the gas driver, a specialist will solve this problem for an hour.

When the column is turned on, the smell of gas

This is serious and threatens the saddest consequences. Immediately turn off the column, turn off the gas supply faucet, provide permanent ventilation in the room, call emergency service (104) and wait for the brigade.

Finally, once again, I would like to remind security. Do not try to disassemble, clean and repair gas equipment yourself. This work is only for qualified specialists.

Our gas column wizards carry out the entire package of work on Beretta gas columns, such models as:

Beretta aqua 11; Aqua 14.

Beretta aqua 11i; Aqua 14i.

Beretta iDrabagno 17; IDRABAGNO 17I.

Beretta iDrabagno 13 ESI; IDRABAGNO 17 ESI

Did you break the Beretta gas column?

The Italian gas speakers Beretta (Beretta) have long been known in Russia and are quite popular with those who used this technique. The Beretta speakers of the IDROBAGNO series and AQUA series are produced in several power facilities and a ignition, including there are varieties of Beretta columns with a closed combustion chamber. Beretta gas water heaters are distinguished by the reliability of structural elements, the stability of work in the fall of water or gas pressure. Long use of the water heater This firm shows a number of faults: the device fails due to clogging of the stamp, which affects the switching on the column and shut down during operation; There is no spark after the opening of the water crane. All these signs indicate the depreciation of the control unit.

The main faults of Beretta gas columns (Beretta) may be as follows:
1. It burns the stall (when the button is released, it swells, in the case of a piezoroca);
2. when turned on, the helmet occurs; does not light up the main burner (in the case of piezoroca);
3 . While working columns turns off the main and ignition burners;
4 . The column is not gaining the desired hot water temperature;
5. lack of sparks, when opening a hot water crane;
6. disconnect column after ignition after 1-2 seconds;
7. spark is, but does not light up (in the case of electronic ignition);

Perform high-quality repairs at home your Beretta column at a convenient time for you! Departure Master in a short time in Moscow and the Moscow region. Repair produce only with original spare parts. We have the most affordable prices. Our company will help you solve all the problems associated with the Gas Column of Beretta. Our employees are held annual training and have relevant certificates, they are annually re-certification for admission to gas-hazardous work.