Cable Channels for the table. Wired mess: Five ideas for storing cables from fixture gadgets for computer wires

Agree, wires, cables and extension cables are the most annoying things in the house. They create a feeling of disorder, complicate cleaning and sometimes even pose a threat to our security, because they are so easy to stumble! Ideally, it is necessary to solve the problem of wires yet at the repair stage: you need to climb everything that you can, in the walls and cable channels, and also thoroughly plan the distribution of sockets. But if the walls of the walls are already late, it does not matter, because there is at least 6 ways to hide the wires. Be sure to apply them, and you will see how your home will transform.

Solution 1. Humble extension in the decorative box

An unsightly extender with a bunch of wires can be hidden in a box with holes cut on the sides and lid. It is cheap, simple and practical. Minus is only one - homemade cuts may not look very neat.

Tip: Instead of boxes, you can use wicker baskets.

Solution 2. Hide the wires in a special box

Unlike decorative boxes, special boxes for extension cables and cables look neat from all sides, so they can be put next to the computer, TV, on the desktop or on the bedside table.

Prompt:

• Find boxes are not a problem. For example, two models are sold in IKEY - standard type and in the form of a bag. Also, cable organizers for wires can be purchased on Ozon, as well as in equipment stores.

Solution 3. Fix the wires with clips

To streamline chaos from the wires lying on the floor or desk, lock them on the wall or furniture housing with special clamps.

Conduct the wires using the furniture steppler.

Tips:

• Cable clamps are sold in building stores and equipment stores;
• In order not to get confused, all the wires should be tagged with homemade labels as in the photo below.

• It is better to use low-challenging transparent clips, for example, from Command firm as in the photo below.

Solution 4. Collect cables in the holder under the table

If you collect all the wires under the table, they will not be visible, and on the table there will be a full order.

Such a cable holder can be bought in IKEE

Solution 5. Close Cables with plastic box

This solution is particularly relevant to mask wires near the TV.

Tip: Ideally, the box should be painted in the wall of the wall.

Solution 6. Honey extender for furniture

You can do it with the help of adhesive hooks or good bilateral scotch.

System block, monitor, stationary telephone, scanner, lamp, printer turned into the usual attributes of the workplace. From each of these devices, the wire is departed to connect to the network, as well as cable cable for connecting to a computer. Their location is not always ordered, which leads to twisting between themselves, inflection, deformation. And this is fraught with failures in the work of the office equipment. Carefully fix all the electric shuffles will help the Cable Channel for the table, to buy which at reasonable value can be on the site.

The tidiness of the office table is the key to the fruitful solution of the tasks

Modern furniture is distinguished by ergonomics. It provides for lifting mechanisms and changes in the angle of inclination. Manufacturers offer a variety of accessories designed for a rational organization of the area of \u200b\u200blabor activity and its content in a proper order. Thanks to them, the production process is optimized. An employee working for the PC does not need to do unnecessary movements. His actions are targeted, which helps to increase their effectiveness. One of them is a cable channel on a worktop, along which the electric pipes are distributed in a given direction, without confusion and bends.

The assortment presents various models:

• In the form of a metallic tray of square shape with a pair of hooks on each side.
• Horizontal rectangular configuration. Their frontal surface is rounded. In the central part there is a special fastening element with blocking.
• Sliding. The main chute is equipped with a retractable part that allows you to adjust its length under the size of the stacked electrical shots.
• Flexible for sheer location. Their structure resembles a spine.

In any of them, you can hide from extraneous eye not only an electrocabyle, but also a network filter, router. Some think that the cable channel for the computer table is the usual plug. This is an erroneous opinion. Pass-plug closes a hole through which electric current conductors pass. And in the tray-channel, they are laid parallel to the desktop plane or perpendicular to it. At the same time, their static is preserved, regardless of the campaigns of the person engaged in the performance of official duties. They do not touch teaching, conducting a wet room cleaning. They do not interfere with the movement of workers and office visitors.

Benefits

Positive moments of using a vertical channel cable for the table and other varieties are obvious.

• Space for legs is released.
• The service life of conductive equipment is extended.
• Electrical appliances operate in safe mode.

For their installation under the tabletop in the furniture items of the last generations, small niches / recesses are formed. If there are no, the installation is carried out directly under the lid. He is not difficult and fulfilling his user will be able to independently.

Do you find it difficult to choose from? Call us! Competent managers will give deployed information on all questions you are interested in. We implement the goods on favorable terms. Impeccable quality is guaranteed!

On the eve, everyone is trying to provide the location of office equipment and move under it. But what if the provider has changed, and the new operator has installed its modem, and this requires additional cable wiring, or have you just moved the location to another room? Do not stick all the walls again, because you can show ingenuity and hide an unsightly cable. In the review of the editorial office site 5 simple, but effective ways how to hide the wires and office equipment of any room, turning them into a unique art object. It's time to eliminate all imperfections and implement the most non-standard ideas.

The simplest solution is to establish that today offer in a wide variety of sizes and shades, but it is too simple. And do not use decorative clips as fastening, which will additionally hold and direct the cable? Cute clamps are offered for sale in the form of leaves, birds, and masking covers that can be played with bright stickers or drawings are available in the same topic.

It is possible to group the wires on the wall in the form of a decorative tree with lush foliage, artistic skills will come to the rescue. In a few minutes, the cable from a chaotic club will turn into a flowering garden.

You can beat the cable stretching along the walls, you can be decorative a fence, and in order for it carefully behind it, it should be pre-fixed with the wires with hook-hooks or hook holders with the adhesive basis. In addition, the mount can be made from a conventional velcro, pick up the color to the interior.

Turn the wire to the art object

If the wiring is very big, and you do not plan to replace them with shorter, you can make the present on the wall, which will immediately attract attention. This design will perfectly fit into vintage, retro or design, for this you will need a minimum set of tools and fasteners.

Add Creativity: Just re-adjust the cable with a bright ribbon, beautiful beads or a thick rope - here you can show a fantasy to the maximum, it all depends on your creative abilities. In any case, the wires will be grouped in one place, and not just chaotically scattered around the room.

How to fix the wires near the desktop

If installed at the wall, you can close the hanging wires with a beautiful curtain, panel, or fasten them with decorative hammacks. For an extension agent, which constantly interferes with the floor, it will suit a small box, it will also protect it from dust. Be sure to do several holes in it for the output of the cable out.

If you are a lover of the devices, an interesting idea for grouping wires is to install on the working surface of a decorative stand in the form of an electrical outlet. You can also put an unusual box with holes for outputting the wires that are easily connected to the technique at any time. It will not take a lot of space, but at the same time will hide the mess and allows you to comfortably organize chargers for gadgets and wires from headphones.

Novelties manufacturers for fixing wires

Manufacturers help solve the problem of wires around and produce original novelties. We offer to familiarize yourself with the interesting inventions.

• a set of holders for fixing the wires, in which clamps and velcro are collected from different parameters;
• screen with holders for wires office equipment. You can lock it on the back or side wall of the desktop;
• install an extra shelf under the table top, and even better - buy a special separator with which the wires will always be in order. If necessary, you can remove one of them without affecting the rest.

How to hide the office equipment in the interior: 5 non-standard solutions

Printer, copier, scanner - such a kit office equipment can be found in almost every home. There is no place for a full-fledged organization of the working office. Here are some advice of professional designers:

• mobile or module with shelves that can be removed under the table and roll out if necessary. The technique will not take place on the desktop and attract attention;
• decorative for a printer in which you need to make holes for wires and paper. On the desktop or near it will look very impressive. If the wicker is not suitable for the room interior, you can cover the printer with a beautiful box;
• you can place the printer in the desktop box or in the chest;
• install an additional shelf under the table and put the printer on it. It is necessary to provide its location in such a way that there is no discomfort for the legs;
• masking equipment for books by installing it on an open next to the desktop. Beautiful and folders will distract attention.

Or maybe it's time to purchase an improved technique? After all, print is not so relevant, now it is more convenient to use the scanner and send documents on the Internet. Consequently, instead of xerox and printer, one scanner needs one scanner, it takes a much less space and can fit in a desktop box.

Dream about the order in the house, but something always prevents the ideal cleanliness? Start with the little things! After all, nothing spoils the appearance of the dwelling as a bunch of wires scattered throughout the apartment. To solve this problem once and for all, we collected 5 cool ideas for storing wires that will help you quickly get rid of endless mess.

Decorative coil

Ordinary coil for threads is the perfect option for storing thin headphones. It is enough to wind the cord of the headset around the bobbin, and put the liners inside the cone. This storage system is compact and universal. It is easy to take with you, throwing an organizer in a bag or pocket. And most importantly, such an organizer will certainly be found in every home. And if not, you can find a cute coil at any store of needlework products. Try this lifehak and you will quickly forget about the fact that the headphones are sometime confused.

For longer wires, you can easily make a larger coil with your own hands. For this, you will need two unnecessary CDs and empty bobbins from the tape. We glue the discs to the reel: on top and bottom. And all - the organizer is ready. If you wish, you can decorate the coil using decorative paper, paints or beads. It remains only to wind the cord and make the markings on one of the disks.

Leaf screeds

If you want to securely fix the cords, randomly sticking throughout the apartment, then the help of the original decorative ties in the form of leaves will come to the rescue. Such clamps will help not only bring the long-awaited order, but also decorate the interior. To get rid of the Bardaka, which create wires from the computer, TV and other device connected to the network, connect several cables together and wrap them with a screed. Fix using a special clasp that is at the end of the clamp. Ready! Without protruding wires, the room will look much more careful, and the green leaves will give the interior of freshness and ease.

Also, ties will help to accurately fold the wires stored in boxes or containers. It is enough to bend each cord in half and fix it with a clamp. Now the cables will not be confused during long-term storage. By the way, the clips for bags with bread, ropes and even beads can appear as a clamp.

Homemade Organizer

You will need a regular box from under shoes and several sheets of cardboard. On the agenda - an organizer with cells, which will help to gently sort a large collection of wires.

So, take the cardboard and cut out several rectangles from it so that they coincide with the box in height, and in length were several millimeters shorter. Optionally, you can enclose cardboard with decorative paper, cloth or decorate it with acrylic paints. Next, make some vertical slots on each rectangle. Each incision should reach the middle of the cards.

Make inside the box markup for future partitions. And collect an internal grid, connecting rectangles along the cut line. It remains only to glue the finished cells to the box using a superclay or bilateral scotch. Do not forget to sign every compartment. Give adhesion to dry and everything - you can fold the wires and put the organizer on the shelf or in the table box.

If you do not like DIY projects, you can easily buy a similar organizer in household goods stores. There you will find a huge number of organizers with cells made in different sizes, colors and from different materials.

Cosmetic bag with pockets

There is nothing easier than hideing the wires into textile cosmetic bag with small pockets. If you are using such a wire storage accessory, then rest confident - the desktop is securely protected from disorder. Just fold the cables and put each of them into separate pockets. And so as not to confuse the cords, make the label using color adhesive tape.

The textile organizer is comfortable and spacious, and he also helps to save a bunch of space. After all, you can roll it with a roll and remove into the box, and you can turn out and hang on the hook. With such an assistant, you can organize storage of wires anywhere: on the wall, in the table, under the table, on the cabinet door and so on.

Instead of cosmetics, you can use the brushes storage case. By the way, needlewomen can sew such an organizer with their own hands. It is enough just to sew a wide gum to a piece of tight fabric, leaving small gaps along the seam. These intervals will serve as pockets for storing wires, and the rubber band securely fixes them in the same position.

Cardboard pipes

Cardboard tubes are a very lightweight and budget way to organize storage of wires. This is another variation on containers with cells. Storage compartments can be made of bushings from toilet paper or cardboard sheets. It is enough to take the basis of several bushings from toilet paper or twist in the tube of cardboard sheets and add a little originality to the future product.

Decor options mass. Cardboard can be placed with paper or cloth. You can wind up each tube with a jute rope or cover aerosol paint. You can even add decoupage. In short, for creativity there are no obstacles.

After the design is completed, and the paint and glue, if so, were used, dried, proceed to the organizer assembly. There are also several options: superchalter, double-sided scotch or rope. Depending on the method of the selected method, simply glue the cells with each other one or we collect them together and firmly wind the rope.

It remains only to choose where to place ready-made cells. For this purpose, a plastic container or a cardboard box is perfect. However, if nothing at hand did not turn out, you can simply put the cells in the table box.

Such an organizer is useful for storing both large chargers and thin headphones. And so that no wire is lost, sign each tube with a marker or glue a paper label to it.