Repairs Design Furniture
Expand
the main ›

Outdoor doors GOST 24698 81. Wooden outdoor doors for residential and public buildings. Types, Design and Dimensions


Group Ж32.

GOST 24698-81

Interstate standard

Wooden outdoor doors for residential and

Public buildings

Types, Design and Dimensions

Wooden EXTERNAL DOORS FOR DWELLING AND PUBLIC

Buildings. TYPES, STRUCTURE AND DIMENSIONS

OKP 53 6110; OKP 53 6196.

Date of introduction 1984-01-01

Information details

  1. Developed and submitted by the State Committee on Civil Engineering and Architecture under the USSR State University
  2. Approved and put into effect by Decree of the USSR State Committee for Construction Affairs of 31.04.81 * N 51

________________

* Corresponds to the original. Date of adoption of standard 13.04.81 (official publication, M.: Standards Publishing House, 1981). - Note database manufacturer.

3. Entered for the first time

4. Reference regulatory and technical documents

Point number, applications
GOST 111-90.2.7
GOST 475-782.1, 2.3
GOST 1144-802.2-2.5
GOST 2697-832.2-2.4
GOST 2850-952.2, 2.5, 2.6
GOST 3916.1-962.3
GOST 3916.2-962.3
GOST 4028-632.3
GOST 4598-862.2-2.6
GOST 5087-802.2, Appendix 3
GOST 5088-942.2-2.4, Appendix 3
GOST 5089-972.9
GOST 5090-862.8, Appendix 3
GOST 5091-782.8, Appendix 3
GOST 7338-90.2.2, 2.5, 2.8
GOST 8242-882.2-2.4
GOST 9573-962.2
GOST 9590-762.2, 2.4
GOST 10174-90.2.2, 2.4, 2.8

5. Reprint

This standard applies to wooden outdoor swing doors for residential and public buildings, as well as for auxiliary buildings and premises of enterprises of various sectors of the national economy.

The standard does not apply to the doors of unique public buildings: train stations, theaters, museums, sports palaces, exhibition pavilions, cultural palaces.

1. Types, sizes and brands

1.1. Doors, depending on the purpose, are divided into types: N - input and tambourines; C - service; L - hatches and lazes.

1.2. HA doors should be made with shield and frame fabric. Framework cannons can be swinging. Types of types of C and L should be made with shield canvases. Shield canvases can be made with a wrapping.

Doors types N and C are manufactured with single and double, glazed and deaf canvases, with a threshold and without a threshold.

1.3. All doors refer to high moisture resistance products.

1.4. The overall dimensions of the doors should correspond to the specified ones. Dimensions in drawings are given for unpainted products and parts in millimeters. The dimensions of the openings are shown in Appendix 1.

Overall dimensions of doors

Notes:

  1. Doors schemes are depicted from the facade.
  2. Figures above door schemes mean the dimensions of the openings in decimeters.
  3. Dimensions in brackets are given for doors 21-15a, 21-19, 24-15a and 24-19 with swinging canvases.
  4. Doors 21-9 and 21-13a are provided for single-storey buildings and garbage disposal.

According to the consumer coordination with the manufacturer, it is allowed to change the glazing drawing by reducing the size of the glass or their membership, as well as the deaf canvas.

The canvas of the type C, exhausted on both sides by the tonclothic galvanized steel along the volume of the specific type of steel, are of size in width of 6, and height is 5 mm less than that of crafts without upholstery.

Doors type C can also be the door with solid filling and enhanced box according to GOST 6629.

1.5. Set the following conditional design structure (stamps) of doors:

Examples of conventional designations

  • The door is entrance or tambour one-posiple for opening height 21 and 9 dm wide, glazed, with the right hollow panel canvase, with a threshold, with O-2 trim:
    • DN21-9 pscho2 GOST 24698-81
  • The same, with the left side of the frame facility:
    • DN21-9LP GOST 24698-8
  • The same, with swinging canvases for opening height 24 and 15 dm wide:
    • DN24-15K GOST 24698-81
  • The door is the service bipoon deaf for opening height 21 and 13 dm wide, insulated:
    • DS21-13GU GOST 24698-81
  • The hatch is one-sex for opening height 13 and 10 DM width:
    • DL13-10 GOST 24698-81

2. Requirements for construction

2.1. Doors should be manufactured in accordance with the requirements of GOST 475 and this standard for working drawings approved in the prescribed manner.

2.2. The design, shape and sizes of doors must correspond to the specified ones. 2-5, and the size of the sections - to damn .6-13.

Design, shape and sizes of doors

Sections of parts - by damn.6-8.

Sections of parts - in damn .9.

The cross sections of the details - on the drawings.10.

Doors Frames with swinging canvases

Sections of parts - Damage.11-13.

Sections of doors details

Shield doors

  1. facing Fiberboard brands of ST or T-larch 3.2-5 mm according to GOST 4598;
  2. rake 12x12 mm;
  3. gasket from porous rubber 2 mm thick according to GOST 7338; 5 - screw 1-3x30 according to GOST 1144, step 200 mm;
  4. mounting board

Notes:

  1. It is allowed to use plastic layouts.
  2. It is allowed to use mounting boards of different design.

1 - Facing Fiberboard brands of Art or T-in a thickness of 3.2-4 mm according to GOST 4598;

2 - Sealing gasket according to GOST 10174

  1. sealing gasket according to GOST 10174;
  2. facing FCP markers T, T-C, Tt-P and T-joint group A thickness of 3.2-4 mm according to GOST 4598;
  3. o-3 trim in GOST 8242;
  4. parchment according to GOST 2697;
  5. facing Fiberboard brands of Art or St-with a thickness of 3.2-4 mm according to GOST 4598;
  6. layout 19x13 mm.

  1. sealing gasket according to GOST 10174;
  2. compounds on gluing water resistance;
  3. screw 1-3x40 according to GOST 1144, step 200 mm;
  4. gasket from porous rubber 2 mm thick according to GOST 7338;
  5. rake 12x20 mm;
  6. mounting board

  1. sealing gasket according to GOST 10174

  1. rush loop according to GOST 5088 (in the territory of the Russian Federation acts GOST 5088-2005);
  2. paper plate plastic according to GOST 9590;
  3. mounting board

  1. porous rubber gasket according to GOST 7338;
  2. the steel is a thin galvanized thickness of 0.5 mm;
  3. facing Fiberboard brand ST or T-in thickness of 4 mm according to GOST 4598;
  4. cardboard asbestos in accordance with GOST 2850;
  5. soft fiberboard M-1 brand with a thickness of 12 mm according to GOST 4598;
  6. rake wooden 12x30 mm;
  7. screws 1-4x40 according to GOST 1144, step 200 mm

  1. the steel is a thin galvanized thickness of 0.5 mm;
  2. pC-bracket PC according to GOST 5087;
  3. boards;
  4. mineral wool slabs on the synthetic binder according to GOST 9573;
  5. laying from porous rubber 6x20 mm according to GOST 7338;
  6. pN1-130 loop according to GOST 5088;
  7. emphasis Wooden thick 50 mm

2.3. The panel door canvases should be made with a solid filling of the shield calibrated with a thickness of wooden slats.

Doors are facing with materials in accordance with GOST 475 in a part relating to the door of high moisture resistance.

Under the condition of continuous sheatting of doors from the outside by profiled rails according to GOST 8242 according to the layer of pergamine according to GOST 2697 or the sheathing of galvanized steel on that of the steel of a particular type, the use of solid fiberglass brands T or T-S, T-P, T-SP according to GOST 4598 Or waterproof plywood grade FC according to GOST 3916.1 or GOST 3916.2. Tambourous doors are allowed to manufacture with wooden slats. Rakes are fastening with screws according to GOST 1144 or nails according to GOST 4028 with a length of 40 mm with an anti-corrosion coating. The maximum step of fasteners is 500 mm. Fastenings in each row should be located on the same level along the entire width of the canvas.

2.4. The lower parts of the doors of the type H should be protected by wooden straps with a thickness of 16-19 mm or lanes from decorative paper plate with a thickness of 1.3-2.5 mm according to GOST 9590, superhard fiberboard with a thickness of 3.2-4 mm according to GOST 4598, tonclothic galvanized become. Wood and plastic protective materials are fixed with waterproof glue and screws with an anti-corrosion coating, and steel stripes - with screws 30-40 mm long in accordance with GOST 1144. The mounting step around the perimeter is 100 mm. The dimensions of protective slats and bands are indicated by damn. 6-11.

2.5. The canvas and boxes of challenges and insulated doors of type C should be protected by a thin-leaf galvanized steel thickness of 0.35-0.8 mm on the TU on the steel of a particular view along the entire surface on both sides, as indicated on the drawback. Sheets of steel together are connected to a single fold.

2.6. The fabric fabrics of the type with both sides are covered with asbestos cardboard layers with a thickness of 5 mm according to GOST 2850.

The canvas of the warmed doors of the type C coated on one side with a layer of soft fiberboard with a thickness of 12 mm according to GOST 4598. On the perimeter of the canvas from the insulation side are fixed with nails or screws, wooden rails 12x30 mm, the mounting step is 100-150 mm.

2.7. For glazing doors, a window glass is used with a thickness of 4-5 mm according to GOST 111 (in the territory of the Russian Federation there is GOST 111-2001)

If the glass is located at a distance of 800 mm or less from the bottom of the web and when using a large format glass, protective fences should be installed.

Examples of installation of protective fences are shown in Appendix 2.

The thickness of the glass, the design of protective grilles and changes in the design of doors associated with the installation of electricians must be specified in the working drawings.

2.8. To protect against mechanical damage, the reduction of noise and heat lifting doors of the H type H must be equipped with door closures of the ZD1 type according to GOST 5091, sealing gaskets according to GOST 10174 or from porous rubber according to GOST 7338, door stops of the UD1 type according to GOST 5091. In double-gas doors should be installed ZV valves or sewing spiveges according to GOST 5090.

2.9. The need to pick doors with locks according to GOST 5089 (in the territory of the Russian Federation GOST 5089-2003) Must be indicated in the order.

2.10. The location of the instruments and their types are shown in Appendix 3.

2.11. In order for the delivery of doors it should be indicated:

  • the number of doors on the brand and the designation of this standard;
  • form and color of the finishes;
  • glass thickness;
  • devices specification.

ATTACHMENT 1

Reference

Dimensions of door openings in the walls

Type N.

Note. The sizes of openings for swinging doors are indicated in brackets.

Type S.

Examples of installation of protective fences

  1. wooden strips of hardening breeds;
  2. steel rod;
  3. strip fastener

Location of instruments in the door

  1. door closers ZD1 according to GOST 5091;
  2. pN3-130 loops; Mon1-150, PN2-150, Mon3-150 according to GOST 5088;
  3. zT valve or sewing spiveges according to GOST 5090;
  4. handle-bracket according to GOST 5087

  1. hinge for counterweight;
  2. pen-bracket according to GOST 5087;
  3. holes for screws M5;
  4. pN1-130 loops according to GOST 5088;
  5. wooden stop

Notes:

  1. In the doors of the type with the closers are not installed.
  2. Castles are installed in cases provided by work drawings.
  3. Handles brackets can be installed vertically or horizontally.
  4. The counterweight loops is installed in one-bed hatches. The use of loops of another design is allowed.

Standard applies to wooden outdoor swing doors for residential and public buildings, as well as for auxiliary buildings and premises of enterprises of various sectors of the national economy.

The standard does not apply to the doors of unique public buildings: train stations, theaters, museums, sports palaces, exhibition pavilions, cultural palaces.

The doors manufactured according to the standard, depending on the purpose, are divided into the following types:

N - entrance and tambourines;

C - service;

L - hatches and lazes.

HA doors should be made with shield and frame fabric. Framework cannons can be swinging. Types of types of C and L should be made with shield canvases. Shield canvases, can be made with a wrapping.

The doors of the types of N and C are made with single-bed and double, glazed and deaf canvases, with a threshold and without a threshold.

All doors manufactured according to the standard belong to the doors of increased moisture resistance.

The overall dimensions of the doors should correspond to the specified. 12. Dimensions in drawings are given for unpainted products and parts in mm. The dimensions of the openings are shown. 25

According to the consumer coordination with the manufacturer, it is allowed to change the glazing drawing by reducing the size of the glass or their membership, as well as the use of deaf cavities.

Doors type C can also be a door with a solid filling and a reinforced box according to GOST 6629-74.

The following structure of the conditional designation (brand) of doors is established.

Examples of symbols:

the door is entrance or tambour one-posiple for opening height 21 and 9 dm wide, glazed, with the right hollow panel canvase, with a threshold, with type 2 trim:

DN 21-9PShR2 GOST 24698-81

the same, with the left side of the frame facility:

DN 21-9LP GOST 24698-81

the door is entrance or tambour with swinging canvases for opening height 24 and 15 dm wide:

DN 24-15K GOST 24698-81

the door is the service bipoly deaf, for opening height 21 and 13 dm wide, insulated:

DS 21-13h GOST 24698-81

the hatch is one-sex for opening height 13 and 10 DM width:

For 13-10 GOST 24698-81

The design, shape and sizes of doors must correspond to the specified. 13 - 16, and the sizes of the sections - to hell. 17 - 24.

Heck. 12. Overall dimensions of doors

Notes:

1. Doors schemes are depicted from the facade.

2. The numbers above the door schemes indicate the dimensions of the openings in DM.

3. Dimensions in brackets are given for doors 21-15a, 21-19, 24-15a and 24-19 with swinging canvases.

4. Doors 21-9 and 21-13a are provided for single-storey buildings and garbage disposals.

Design, shape and sizes of doors

Heck. 13. Shield doors

Sections of details, see the hell. 17 - 19.

InterstateSTANDARD

Wooden doors exterior for residential
And public buildings

Types, Design and Dimensions

Wooden External Doors for Dwelling and Public Buildings.
TYPES, STRUCTURE AND DIMENSIONS

GOST
24698-81

Date of administration 01.01.84

This standard applies to wooden outdoor swing doors for residential and public buildings, as well as for auxiliary buildings and premises of enterprises of various sectors of the national economy.

The standard does not apply to the doors of unique public buildings: train stations, theaters, museums, sports palaces, exhibition pavilions, cultural palaces.

1. Types, sizes and brands

1.1. Doors, depending on the purpose, are divided into types: N - input and tambourines; C - service; L - hatches and lazes.

1.2. HA doors should be made with shield and frame fabric. Framework cannons can be swinging. Types of types of C and L should be made with shield canvases. Shield canvases can be made with a wrapping.

Doors types N and C are manufactured with single and double, glazed and deaf canvases, with a threshold and without a threshold.

1.3. All doors refer to high moisture resistance products.

1.4. The overall dimensions of the doors should correspond to the specified. . Dimensions in drawings are given for unpainted products and parts in millimeters. The dimensions of the openings are shown in the application.

According to the consumer coordination with the manufacturer, it is allowed to change the glazing pattern by reducing the size of glass or their membership, as well as apply the deaf canvas.

The canvas of the type C, exhausted on both sides by the tonclothic galvanized steel along the volume of the specific type of steel, are of size in width of 6, and height is 5 mm less than that of crafts without upholstery.

Doors type C can also be the door with solid filling and enhanced box according to GOST 6629.

1.5. Set the following conditional design structure (stamps) of doors:

Examples of conventional designations

The door is entrance or tambour one-bed for opening height 21 and 9 dm wide, glazed, with the right hollow panel canvase, with a threshold, with type 0-2 trim:

DN21-9 PS42 GOST 24698-81

The same, with the left side of the frame facility:

DN21-9LP GOST 24698-81

The same, with swinging canvases for opening height 24 and 15 dm wide:

DN24-15K GOST 24698-81

The door is the service bipoon deaf for opening height 21 and 13 dm wide, insulated:

DS21-13GU GOST 24698-81

The hatch is one-sex for opening height 13 and 10 DM width:

Doors are facing with materials in accordance with GOST 475 in a part relating to the door of high moisture resistance.

Under the condition of continuous sheatting of doors from the outside by profile rails according to GOST 8242 according to the layer of pergamin according to GOST 2697 or the sheathing of galvanized steel on that of the Steel of a particular type, the use of solid fiberglass brands T or T-C, T-P, T-SP according to GOST 4598 Or waterproof plywood grade FC according to GOST 3916.1 or GOST 3916.2. Tambourous doors are allowed to manufacture with wooden slats. Rakes are fastening with screws according to GOST 1144 or nails according to GOST 4028 with a length of 40 mm with an anti-corrosion coating. The maximum step of fasteners is 500 mm. Fastenings in each row should be located on the same level along the entire width of the canvas.

__________

* From January 1, 2010, the application on the territory of the Russian Federation (hereinafter) was discontinued.

The canvas of the warmed doors of the type C coated on one side by a layer of soft fiberboard with a thickness of 12 mm according to GOST 4598. Around the perimeter of the canvas from the insulation side are fixed with nails or screws wooden slats 12 ´ 30 mm, mounting step - 100 - 150 mm.

If the glass is located at a distance of 800 mm or less from the bottom of the web and when using a large format glass, protective fences should be installed.

Examples of installing protective fences are shown in the application.

The thickness of the glass, the design of protective grilles and changes in the design of doors associated with the installation of electricians must be specified in the working drawings.

Overall dimensions of doors

Heck. one

Notes:

1. Doors schemes are depicted from the facade.

2. Figures above door schemes mean the dimensions of the openings in decimeters.

3. Dimensions in brackets are given for doors 21-15a, 21-19, 24-15a and 24-19 with swinging canvases.

4. Doors 21-9 and 21-13a are provided for single-storey buildings and garbage disposal.

Design, shape and sizes of doors

Doors Frames with swinging canvases

Sections of doors details

Shield doors

1 - sealing gasket according to GOST 10174; 2 - Facing Fiberboard brands of Art or T-in
3.2 - 5 mm thick according to GOST 4598; 3 - Rake 12.´ 12 mm; 4 - porous rubber gasket
2 mm thick according to GOST 7338; 5 - Screw 1 - 3´ 30 according to GOST 1144, step 200 mm; 6 - Mounting board

Notes:

1. The use of plastic layouts is allowed.

2. It is allowed to use mounting boards of different design.

1 - facing Fiberboard brands of Art or T-in thickness of 3.2 - 4 mm according to GOST 4598;
2 - sealing gasket according to GOST 10174

1 - sealing gasket according to GOST 10174; 2- facing DVP markers T, T-C, T-P and T-joints of the group A
3.2 - 4 mm thick according to GOST 4598; 3 - grade clay 0-3 according to GOST 8242; 4 - parchment according to GOST 2697;
5 - Facing Fiberboard brands of Art or St-with a thickness of 3.2 - 4 mm according to GOST 4598; 6 - Layout 19.´ 13 mm

Type N.

1 - sealing gasket according to GOST 10174; 2 - connection on glue water resistance;
3 - screw 1-3.´ 40 according to GOST 1144, step 200 mm; 4 - gasket from porous rubber 2 mm thick
GOST 7338; 5 - rake 12.´ 20 mm; 6 - mounting board

1 - sealing gasket according to GOST 10174

Doors Frames with swinging canvases

1 - spring loop according to GOST 5088;
2 - paper plate plastic according to GOST 9590; 3 - mounting board

2.11. In order for the delivery of doors it should be indicated:

The number of doors on the brand and the designation of this standard;

Form and color of the finishes;

Glass thickness;

Devices specification.

Type S.

Doors shields

Epoprietia

1 - porous rubber gasket according to GOST 7338; 2 - the steel is a thin galvanized thickness of 0.5 mm; 3- facing Fiberboard brand ST or T-in thickness of 4 mm according to GOST 4598; 4- cardboard asbestos in accordance with GOST 2850; 5-soft fiberboard M-1 brand is 12 mm thick according to GOST 4598; 6- wooden rail 12.´ 30 mm; 7- screws 1-4 ´ 40 according to GOST 1144, step 200 mm

Type L.

1 - the steel is a thin galvanized thickness of 0.5 mm; 2 - pC handle PC according to GOST 5087;
3 - boards; 4 - mineral wool slabs on the synthetic binder according to GOST 9573;
5 - Gasket of porous rubber 6´ 20 mm according to GOST 7338; 6 - pN1-130 loop according to GOST 5088;
7 - stop wooden thick 50 mm

Notes:

1. In the door doors with the closers are not installed.

2. Locks are installed in cases provided by working drawings.

3. Handles-brackets can be installed vertically or horizontally.

4. The hinges for the counterweight are installed in one-bed hatches. The use of loops of another design is allowed.

Information details

1. Developed and submitted by the State Committee on Civil Engineering and Architecture at the USSR State University

2. Approved and put into effect by the Resolution of the USSR State Committee on Construction Affairs of 31.04.81 No. 51

3. Entered for the first time

4. Reference regulatory and technical documents

Did not find an answer to your question? Look at here
How to return the love of her husband to his wife - Tips of the psychologistHow to return the love of her husband to his wife - Tips of the psychologist
Why you can not give iconsWhy you can not give icons
Why you can not give iconsWhy you can not give icons

NTD designation,
to which the link is given

Point number
Applications

NTD designation,
to which the link is given

Point number
Applications

This standard applies to wooden outdoor swing doors for residential and public buildings, as well as for auxiliary buildings and premises of enterprises of various sectors of the national economy.

The standard does not apply to the doors of unique public buildings: train stations, theaters, museums, sports palaces, exhibition pavilions, cultural palaces.

1. Types, sizes and brands

1.1. Doors manufactured under this standard, depending on the purpose, are divided into the following types:
N - entrance and tambourines;
C - service;
L - hatches and lazes.

1.2. HA doors should be made with shield and frame fabric. Framework cannons can be swinging. Types of types of C and L should be made with shield canvases. Shield canvases, can be made with a wrapping.
The doors of the types of N and C are made with single-bed and double, glazed and deaf canvases, with a threshold and without a threshold.

1.3. All doors manufactured under this standard belong to the door of increased moisture resistance.

1.4. The overall dimensions of the doors should correspond to the specified. 1. Dimensions in the drawings of the standard are given for unpainted products and parts in mm. The dimensions of the openings are given in the reference application 1.
According to the consumer coordination with the manufacturer, it is allowed to change the glazing drawing by reducing the size of the glass or their membership, as well as the use of deaf cavities.
The canvas of the type C, exhausted on both sides by the tonclothic galvanized steel according to GOST 7118-78, are of the size of 6 width, and height is 5 mm less than that of crafts without upholstery.
Doors type C can also be a door with a solid filling and a reinforced box according to GOST 6629-74.

1.5. The following structure of the conditional designation (brand) of doors is established.

Examples of symbols:

The door is entrance or tambour one-posiple for opening height 21 and 9 dm wide, glazed, with the right hollow panel canvase, with a threshold, with type 2 trim:

DN 21-9PShR2 GOST 24698-81


The same, with the left side of the frame facility:

DN 21-9LP GOST 24698-81


The door is entrance or tambour with swinging canvases for opening height 24 and 15 dm wide:

DN 24-15K GOST 24698-81


The door is the service bipoly deaf, for opening height 21 and 13 dm wide, insulated:

DS 21-13h GOST 24698-81


The hatch is one-sex for opening height 13 and 10 DM width:

For 13-10 GOST 24698-81

2. Requirements for construction

2.1. Doors should be made in accordance with the requirements of GOST 475-78, this standard and on working drawings approved in the prescribed manner.

2.2. The design, shape and sizes of doors must correspond to the specified. 2 - 5, and the dimensions of the sections - to hell. 6 - 13.

2.3. The panel door canvases should be made with a solid filling of the shield calibrated with a thickness of wooden slats.

Door facing is made by materials in accordance with GOST 475-78 in a part belonging to the doors of increased moisture resistance.

Under the condition of a continuous sheatting of doors from the outside by profiled rails according to GOST 8242-75 according to the layer of pergamin according to GOST 2697-75 or the sheathing of galvanized steel according to GOST 7118-78, the use of solid fibreboard brand T-400 according to GOST 4598-74 or glued plywood brand is allowed FC according to GOST 3916-69. Tambourous doors are allowed to manufacture with wooden slats. Rakes are fastened with screws according to GOST 1144-80 or nails according to GOST 4028-63 40 mm long with an anti-corrosion coating. The maximum step of fasteners is 500 mm. Fastenings in each row should be located on the same level along the entire width of the canvas.

2.4. The lower parts of the doors of the type H should be protected by wooden straps with a thickness of 16 - 19 mm or strips of decorative paper plate with a thickness of 1.3 - 2.5 mm according to GOST 9590-76, superhard fiberboard thickness 3.2 - 4 mm in accordance with GOST 4598 -74, thin galvanized steel. Wood and plastic protective materials are fixed with waterproof glue and screws with an anti-corrosion coating, and steel stripes - screws 30 - 40 mm long by GOST 1144-80. Fastening step by perimeter 100 mm. Sizes of protective slats and strips are shown. 6 - 11.

2.5. The canvas and the boxes of challenges and warmed doors of type C should be protected by a thin-leaf galvanized steel thickness of 0.35 - 0.8 mm according to GOST 7118-78 over the entire surface on both sides, as indicated on the feature. 12. Sheets of steel interconnected into single folds.

2.6. The fabric fabrics of the type with both sides are covered with asbestos cardboard layers with a thickness of 5 mm according to GOST 2850-75.

The canvas of the warmed doors of the type C are coated on one side by a layer of soft wood fiber plates with a thickness of 12 mm according to GOST 4598-74. On the perimeter of the canvas from the insulation side, the wooden rails 12 30 mm are fixed or screws, the mounting step is 100-150 mm.

2.7. For glazing doors, a window glass is used with a thickness of 4 - 5 mm according to GOST 111-78.
If the glass is located at a distance of 800 mm or less from the bottom of the web and when using a large format glass, protective fences should be installed.
Examples of the installation of protective fences are given in the recommended Annex 2.
The thickness of the glass, the design of protective grilles and changes in the design of doors associated with the installation of electricians must be specified in the working drawings.

2.8. To protect against mechanical damage to the reduction of noise and heat lifting doors of the H type H must be equipped with door closures of the ZD1 type according to GOST 5091-78, sealing gaskets according to GOST 10174-72 or from porous rubber according to GOST 7338-77, door stops of the type UD1 according to GOST 5091- 78. In bipoly doors, ZT valves or spivenets of the SCU according to GOST 5090-79 should be installed.

2.9. The need to pick doors by locks according to GOST 5089-80 should be indicated in the order.

2.10. The location of the devices and their types are given in the required application 3.

2.11. In order for the delivery of doors it should be indicated:
the number of doors on the brand and the designation of this standard;
form and color of the finishes;
glass thickness;
Devices specification.

Overall dimensions of doors

Notes:

1. Doors schemes are depicted from the facade.
2. The numbers above the door schemes indicate the dimensions of the openings in DM.
3. Dimensions in brackets are given for doors 21-15a, 21-19, 24-15a and 24-19 with swinging canvases.
4. Doors 21-9 and 21-13a are provided for single-storey buildings and garbage disposals.

Design, shape and sizes of doors

Shield doors


Sections of details, see the hell. 6 - 8.

Frame doors


Sections of details, see the hell. nine.

Heck. 3.


Sections of details, see the hell. 10.

Doors Frames with swinging canvases

Doors panel challenges and insulated

Hatches and lazes


Sections of details, see the hell. 11 - 13.

Sections of doors details

The outdoor entrance doors are manufactured under the state standard 24698 from 1981, as well as (for technical buildings and premises) under the state standard 14624 from 1984. You can buy at a bargain price and convenient delivery of any brands of external building doors in a short time. We accept orders for door blocks of non-standard sizes according to your measurements. Here you can buy products "Doors GOST 24698-81" from the manufacturer at a price of 2150 rubles For the block, taking into account VAT, a package + door leaf in the package (polyethylene film).

The advantage of outdoor doors From the fiberboard is that they are fully prepared for installation, having no high weight installation of such doors will not cause difficulties and does not take much time. DN outdoor door blocks GOST 24698-81 are installed as entrance doors to public, residential and industrial buildings with high patency and operational load. Standard configuration of door blocks are indicated in our price list. All prices are relevant - March 2019, Prices are subject to VAT.

Blocks are supplied complete - box + Blizzard, Cutting under the castle

For doors under glazing with labeling bottom - strapboard comes in a set.

Accessories to choose from

  • Locking lock Z9-4.2 s with handles Suwald 420 rubles with insert
  • Castle of LC4-3.03 with Cylindrical Handles 500 rubles with insert
  • Locking Castle ZV8-4 without pens 220 rubles with insert
  • Pen-latch ZSh12-240 rubles with insert
  • Handle-latch ZSHD-16-270 rubles with a laundry latch with a mounted
  • Handle-bracket PC 100 30 rubles
  • Spivel 20 rubles

Additional elements for the production of "Doors GOST 24698-81"

  • Spring 60 rubles
  • Compactor 110 rubles on any block

Door platbands

  • Coolband MDF 6 x70 on one side of any block of unpredied price of 160 rubles.
  • MDF 6 x70 platband on one side of any block was a primed price of 170 rubles.
  • Calcari MDF 6 x70 on one side of any block painted by VD dye Price 180 rubles.
  • Coolband MDF 6 x70 on one side of any block painted nitroemal Price 200 rubles.
  • Coolbands wooden 12 x70 on one side of any block unpredied price of 250 rubles.
  • Coolbands wooden 12 x70 on one side of any block was a primed price of 260 rubles.
  • Coolband wooden 12 x70 on one side of any block painted in paint Price 270 rub.
  • Coolbands wooden 12 x70 on one side of any block painted by nitrate price 310 rub.

Imaging is a presets to order a striking communion and zastroinchika outer dietary diet 24698-81. In a co-clip of the outer two, the way: a canvas, a box, loop, cutting under the castle, a stroke.

The cost of the entrance doors is indicated in the price list. To get a discount call 8 925 510 85 33 .

Entrance doors GOST 24698-84 of our production