Wooden hacksaw in the XXI century: We study new tool opportunities with history. Piled hand-made wood: varieties, what better to choose the choice of hand saw

Wood hacksaws differ among themselves in size cutting teeth. This indicator determines what the cut will be, for what breeds of wood is suitable for a hacksaw and how comfortable will it work with it. But, in addition, there are other indicators for which you need to pay attention when choosing a tool. Therefore, the question is how to choose the tree knife on a tree requires careful study.

Specifications of tree hacksaw

For wood saws, the main value is:

width of the canvas;
length of the canvas;
tooth size;
handle;
brand steel canvas.

The length of the canvas affects the width of the cutting blankAnd also greatly facilitates work. A long progress makes it possible to make less effort, because for one movement, the cut is produced by a large number of teeth. At the same time, the longer canvas, the stronger it will spring. Working with solid rocks, such as ash, maple or oak, hacksaw will cause many inconveniences, and will quickly stand.

In terms of practice, short hacksaws, with a long cutting canvas up to 35 cm, it is best to use for a single small work. They are great for those who live in the apartment, because they do not occupy a lot of space. So, in the private farm, it is desirable to immediately choose a long hacksaw (50-55 cm). It will give the opportunity to work with the billets, as well as cut the trees.

As a rule, the width of the canvase has 10-20 cm. Thickest cloths are not allowed due to technical considerations (breaking even with a small bending), more widely inconvenient to work manually. When choosing a saw saw, you must remember that thin blanks easier to saw a narrower web, on the contrary, thick (roofing lags, tree trunk, etc.) - wide.

Conventional handles are made from plastics. It is best to pick a handle with a rubberized substrate. It will protect his hand from the corner, and will give the opportunity to perform a more dense grip.

Tooth saws is the most important part of the tool, because at this moment we will focus more.

Appointment and types of teeth

In the tree hacksaws, such types of tooth distinguish:

for universal cut;
for transverse cut;
for longitudinal cut.

Longitudinal cut Most often produced by or pubsy, or circular saw. But there are manual saws for these purposes. As in the option with electrical instruments, the tooth on the knife is similar to the hook. The angle between the tooth can be 45-60 degrees.

Hook makes it possible to produce only in one direction. It is best to make a cut along the fibers. In this case, the saw easily penetrates the tree and the cut leaves the most accurate and smooth. The acquisition of this hacksaw is appropriate only to people who want to make furniture with their own hands. Because for any other purposes it does not fit.

Transverse the most popular. Outwardly, it looks like an equifiable triangle. The angle of the tooth is 45-55 degrees. This design makes it possible to fill well both while driving forward and in the opposite direction. As a result, the transverse cuts occurs without much effort, quickly and as much as possible. When choosing a hacks, it is necessary to take into account that this type of tooth is suitable only for dry blanks. Fresh tree saw will break, and the sharpening will deteriorate.

For fresh wood use triangular teeth with parallel sharpening. This denotes that the teeth are shaky and only on one side. As a result, a free channel appears between the teeth inside the cut, according to which wet sawdust can freely exit, not complicating the progress of the canvas.

Next option - combined teeth. Here triangles intersect with semicircular. Moreover, the semicircular tooth is large, rather than triangular. During the movement of the web forward, long and narrow teeth perform a guiding incision, and when the cloth returns to the initial position, the triangular tooth increases the cutting channel and displays the chips and sawdust. We must not forget that the less the angle between the triangular and semicircular tooth, the exact one will be a cut.

Saws for universal cutting It is advisable not to choose, as a rule, they have a different compilation of teeth, which theoretically should be equally well to perform any work. But in practice, these hacks are stupid much faster, and their sharpening is usually more expensive than a new saw.

And what is the most important thing - in any high-quality sofa of the teeth are obliged to be made of kalena steel.

Types of tree hacks

There are several types of saws, among them:

ordinary;
narrow;
basic;
with volat.

The cheapest saw on the tree is narrow manual knob. This tool is suitable for subscribing branches when working in the garden and minor work with workpieces. As a rule, it is used or double-sided triangular teeth, or a parallel sharpening.

Need to understand that it is possible to work this hacksaw only with blanks, no more than 7-12 cm thick. A very short canvas does not make it possible to create a lever, respectively, cut thick parts is sick to demand a large load.

Ordinary saws Can be with any kind of teeth. The choice will depend only on what tasks you plan to acquire the tool. You need to pay attention only to the fact that these saws are undesirable to work during the production of furniture. Or you need to purchase special large stubs so that it is possible to cut under a certain slope.

Saws with Obuchom Apply as auxiliary tool. Their main task is small feeds into details.

Amountless knobs - This is an analogue of electric jigsaw. They make it possible to make the most accurate incision and work with various billets at different angles. Exist:

transverse;
disconnected;
spike;
plot.

Unlocking knobs make it possible to produce longitudinal cutting. Today there are cloths 40-80 cm long. Long billets can be cut only with the help of power tools.

Transverse knobs Used for cutting blanks across the fiber. They can perform a cut, and at right angles, and under anyone else. And the perfectly smooth edges are out of the section.

Removal knobs Thicketer, applied for figure cut. With the help of them, rounding and other complex elements are performed. A characteristic feature is the use of very flexible steel grades.

Ship knobs make it possible to perform simple geometric shapes on the workpiece.

The difference between the lyric saws is that the mechanism for fasteners is purchased once, and directly on the saws are not spent, buying new web.

Producers saw on wood

Professional saws Distinguishes good quality and compliance with the specified characteristics. By purchasing the tool of verified manufacturers, you will be sure that this product will serve you reliably and for a long time. Among the proven manufacturers need to be allocated:

Bahco. - This is a Swedish company that is part of SNA Europe. More than 2 years of history, the company never changed its main concept - the manufacture of a high-quality and affordable hand tool. Bahco saws are characterized by durability, and pleasant cost.

Also on the market you can find Sandvik saws. This company is part of Bahco, because the quality of the goods meets the general requirements of the company.

American manufacturer PIL. Stanley., also focuses on the availability of his product. The company is distinguished by a large state of engineers and designers. Thanks to their developments, the cutting edge and canvas of hacksaw differ from the domestic GOST, but it absolutely does not affect the quality. This company is great for those who choose the hacksaw to give. Because combined large teeth make it possible to produce any types of cut.

German firm Gross. Younger than other companies. The competitiveness of his product is achieved thanks to a very low cost. However, products are quite high-quality and meets all regulations. The disadvantage is only that the choice of products is very small.

There are also domestic manufacturers offering high-quality and relatively inexpensive saws. Among which:

Piranha;
Bison

Saws bison Made in China, however, comply with the requirements for teeth and steel. From shortcomings:

cannot be used to work with solid wood;
the time of constant work is not more than 10 minutes (then pause is 15 minutes);
you should not leave on the street (quickly degrees, even with a small humidity).

Despite this, hacking characteristics are suitable for cutting trees.

Piranha's company is relatively small and works relatively recently. Like all new, its goods are quite accessible and distinguished by good quality. Piranha saws Presented only in several options. Large country manufacturer of this product - China. But the products of this company are covered with Teflon, which protects the hacksaw from corrosion, even in the case when you forgot it on the street.

About security and comfort

During the choice of hacksaw on a tree, pay attention to the handle. The most convenient is a two-component handle With a rubberized insert. It provides a durable grip, does not allow the palm to slide and does not rub the hand.

To work with various types of workpieces and performing different types of propyl not superfluous is a set of replacement canvases.. Often saws are equipped with a snap-in with different cutting edges and different shapes - for spillings of branches, transverse and direct propilov, etc. It is also quite convenient when the hacksaw is equipped with a cover for carrying and storing or at least a plastic plug closing sharp edges, excluding injury and damage surface damage.

Updated: 09/19/2019 11:10:35

Expert: Lion Kaufman

* Overview of the best editorial board. On the selection criteria. This material is subjective, not advertising and does not serve as a guide to purchase. Before buying, you need consultation with a specialist.

Despite the abundance of electric tools for cutting materials, they are used in human activity and traditional hacksaws. With their help, you can quickly cut the most different on the density of the workpiece. It does not need to unwind the electric wire, refuel the technique of gasoline, the tool does not take up much space in the car trunk. A low price allows you to have a hand tool not only by professionals, but also to home masters. Today there are many different models, the advice of experts will help correctly make a choice.

How to choose high-quality hacksaw

To work with wood, it is suitable for one-handed and two-handed models. Crop the bitch is better tool with narrow saber-shaped canvases. And to work with boards or bars more conveniently classic hacksaw with a wide smooth blade. You can quickly prepare firewood for a campfire using a traditional two-handed saw.
To work with more solid wood based materials and cardboard (laminate, parquet board, chipboard, MDF, etc.), a special hacksaw is required. She has a different form of canvas, hardness and sharpening teeth.
For the cutting of popular gas silicate blocks, it is necessary to use a special hacksaw with large teeth. The cutting part is equipped with carbide inserts, they retain sharpness even after the construction of several buildings.
Metal hacksaw on the contrary is equipped with narrow cloths with smallest cloth. Most often, such a tool has a frame design.
There are special hacksaws for segment of plasterboard. They have a special configuration of teeth to do smooth cut.
When choosing a knob, it is important to draw attention to the convenience of the handle. They are different forms, are made from traditional and modern materials. The main thing is that there was a reliable and comfortable grip.
Since, with long-term work from friction, a strong heating of the canvase occurs, then only carbonaceous and high-speed steel grades are capable of preserving the hardness and sharpness. The hardness of the cutting edge should be at the level of 60-65 HRC, and the canvas itself is 45 units.

14 best hacksaws hit our review. When drawing up the rating, expert opinions and user reviews were taken into account.

Rating the best knobs

Nomination	a place	Name of product	price
Best tree hacks	1		1,895 ₽
	2		1 857 ₽.
	3		1 260 ₽.
	4		1 049 ₽.
	5		649 ₽
Best Hanks on Aerated concrete	1		3 400 ₽
	2		$ 1,080
	3		920
Best Metal Hands	1		2 850 ₽
	2		649 ₽
	3		1 390 ₽.
Best hacksaw on plasterboard	1		2 085 ₽
	2		$ 1,625
	3		$ 1,062

Best tree hacks

Wood with a tree is better to choose depending on the destination. Universal is a saw, which has a cloth with a length of 450-500 mm with a medium-sized teeth. Crop the garden is more convenient for a shortened ash and outlet model. And with the logs only a long two-hand saw will cope. Experts selected several high-quality products.

With different materials on a wooden basis, the Swedish hacksaw BAHCO 2600-16-XT11-HP can cope. The model of the universal type is intended for transverse cut, although there will be longitudinal cuts in skillful hands. Experts highly appreciated the unusual geometry and durable teeth of teeth, giving the model the first place of our rating. It should be noted the presence of a low-digit coating, it reduces friction during operation. This has a positive effect not only on the fatigue of the employee, the cloth is heated less. In addition, the protective layer prevents corrosion. The handle has a two-component structure, it has a comfortable grip and a reliable mount to the canvas.

Users especially like quality propyl. The disadvantages should include the blackening of the cut at the initial stage of application.

Dignity

high quality;
low weight (0.45 kg);
comfortable handle;
perfect propyl.

disadvantages

high price.

Especially for laying the laminate was created by Stanley 2-20-180. The manufacturer made a cloth from high strength fast. For hardening teeth, the latest heat treatment technology is applied. It allows you to withstand high load without additional sharpening. At the same time, working with a hand tool is quick and comfortable. American hacksaw is light enough (0.46 kg), blade lengths (450 mm) enough for transverse cutting of laminate and parquet board. In hand, the tool is well held, thanks to an ergonomic two-component handle.

The finishes praise the hacksaw Stanley 2-20-180, highlighting the quality of the materials used and smooth propyl. By speed, the hand-made tool is not inferior to the electrolybiz, winning exactly. The model is located in the second position.

Dignity

high-quality manufacture;
precise cut;
unique hardening of teeth;
long service life.

disadvantages

high price.

Basic saw fiskars 124810 is designed to trim the trees in the garden. The model has a collapsible design, replace the cutting canvas can be quickly and without keys. The hacksaw is not very light (0.77 kg), so cut the bunches on the elongated hand will be tedious. If necessary, the second hand can be helped by holding a metal arc. For a comfortable grip, the manufacturer made special recesses under the fingers. The skeleton of saws is protected from corrosion using a paint coating. With the length of the hacksaw 700 mm optimally operate with branches with a diameter of 50-80 mm.

There are no special complaints to the quality of the hacksaws, except that there is a small lifestyle to the side. But the main problem for domestic owners is to search for spare canvases. Therefore, hacksaw ranks third ranking.

Dignity

low weight;
comfortable grip;
compactness;
high-quality cloth.

disadvantages

no selling spare canvases.

Gross 23100 Removable Hitchcraft is able to work with different materials. It is not only wood, composites (laminate, MDF, chipboard, etc.), but also various polymers (polyurethane, polystyrene foam). The saw was developed by a famous German manufacturer, and made in Taiwan. The main part of the product is the cutting cloth from Japanese steel. The teeth have a 3D sharpening, so the propyl is obtained by high-quality, and the cutting speed is high. Polymer coating is applied to protect the rust canvas. The basis of the handle was durable plastic, grip has a special soft lining.

Many masters have in their arsenal a spinning saw GROSS 23100. They note the ease (0.188 kg) and the compactness of the model. Only the performance of the hacksaw is strongly limited. The model does not fall into the leading top of the rating.

Dignity

ease and compactness;
3D teeth;
affordable price;
comfortable handle.

disadvantages

small productivity.

Two-handed saw, which used to be in every house, today became a real rarity. What should buy the buyer to acquire the model ZUBR 1524-100? This is not only a nostalgia or desire to pull the physical form. First of all attracts low price. The second point that worries travelers, fishermen or hunters is compact sizes and mobility. Remove from the road dropped tree or blank a few logs for camp elementally just for two people. With certain skills, even one person will be able to perform propyl. The canvas looks simple and practical, the sharp 2D teeth are instantly dug in the wood.

Several grieved the pick-up Wooden handles for which it is uncomfortable to keep the tool, like the working posture during sawing. The product closes our rating.

Dignity

compactness;
practicality;
low price.

disadvantages

wooden handles;
uncomfortable pose during pickle.

Best Hanks on Aerated concrete

Blocks made of foam and aerated concrete became a popular building material for the construction of walls. To cut the dense structure, hacksaws with large teeth are used. The length of the canvas ranges in the range of 500-700 mm, there must be carbide attacks on the teeth. Experts allocated some good models.

The necessary mason tool is a shovel on a gas concrete. Saw Irwin 10505549 is designed for long-term work with block materials. Structure stock is enough to build several houses. The length of the canvas is 700 mm, it is made from the Swedish steel with a thickness of 1 mm. The cutting part is made using TGT technology (triangular sharpening), each second tooth has a carbide attack. For comfortable operation of the operator, the manufacturer equipped the hacksaw with a soft ergonomic handle. It is connected to the canvas with a screw mount. When storing and transporting, the blade provides an interactive cover.

Users call the saw with one big dignity. With it, it is possible to use the exact and smooth cut, serves as a tool for many years. The model ranks first in our ranking.

Dignity

swedish steel;
teeth with carbide attacks;
trigger sharpening;
ergonomic handle.

disadvantages

high price.

Decent quality at reasonable price allowed the hacksaw Zubr 15157-70 to take second place in the ranking. To work with solid material, the manufacturer applied several new technologies. Steel canvas is protected from corrosion and mechanical exposure to antifriction coating. Special large teeth have a carbide attack "VK8". A special technology soldering was used to connect the harditelus with steel. The canvas is attached to a two-component handle with 3 screws. Shockproof plastic combines with a soft polymer lining. Store the knife is limited due to the hole on the edge of the canvas.

Builders note the quality production of a saw, an acceptable price. But in order to get smooth cut, it is necessary to adapt to the inside of the canvas.

Dignity

carbide teeth;
hole for suspension;
acceptable price.

disadvantages

there is an expansion of the canvas to the side.

At the most affordable price is implemented on the domestic market for the Stayer 2-15096 aerated concrete market. The German-Chinese tool is suitable for homemade masters, which with their own hands build houses, garages and hozpostroy. In contrast to the ranking leaders, the model has a shorter steel web (500 mm) protected by antifriction coating. Large teeth with carbide inserts are located in 20 mm increments. The plastic handle has a rubberized insert, which makes the work comfortable. The hacksaw can be swallowed during storage due to the hole in the canvas.

In response, users consider hacksaw the most suitable option for home construction. It is only difficult to make longitudinal cuts due to short web.

Dignity

low price;
ergonomic handle;
acute carbide teeth.

disadvantages

fast the teeth are missing;
short canvas.

Best Metal Hands

The narrow and thin blade of the metal hacksaw can penetrate into the most hard-to-reach places where it is not to get to the grinder. Duties in different directions will be easier if it is possible to rotate the web at the desired angle. Here are some effective tools.

A unique hamch for metal for professionals is the Bahco 325 model. It has a solid aluminum frame with a spring tension mechanism. This design allows you to quickly and conveniently replace the hacksaw blade. After installation, the cutting element is centering, resulting in an ideal balance. The canvas can be installed at an angle of 55 degrees. The manufacturer is equipped with its product with a bimetallic Sandflex web 300 mm long. Due to the high hardness, sharp sharpening is preserved for a long time.

Masters consider Bahco 325 hacksaw better tool for metal cutting. Experts highly appreciated the quality of the product, giving him the first place of our rating.

Dignity

high quality;
aluminum frame with spring mechanism;
bimetallic canvas;
two corners of the cut.

disadvantages

high price.

The second place of our rating experts gave the Stanley 0-20-108 transforming-transformer. The manufacturer has developed a unique frame design that allows you to select one of five configurations depending on cutting conditions. With the help of the saw, it is possible not only to cut metal blanks, but also to level the edges. The canvas can also be rotated at an angle of 45 degrees. The base of the hacksaw becomes steel frame with fiberglass coating. It has a special compartment for storing the cutting canvas. The tool can be held in both two hands and one. Comfortable retention provides two-component handle.

Hoven deserved praise for multifunctionality and from consumers. Bright coloring is also a plus model. But the quality of the assembly does not allow the product to bypass the leader.

Dignity

multifunctionality;
convenience of use;
stylish design;
strength.

disadvantages

poor-quality assembly;
large weight.

Simple and affordable handbreaker GROSS 77604 ranked third in our ranking. The model has a steel frame protected from corrosion with paint and varnish coating. The manufacturer equip his product with a lever mechanism, it is responsible for the maximum tension of the cutting canvas. The possibility of turning the blade for 45 and 90 degrees. The bimetallic canvas is made of carbon steel, to which a strip of fast-cutting with teeth is welded. Thanks to the seizure of a special form and rubberized insert, hold the tool conveniently, fatigue is reduced with a long-term sawing.

Users in reviews are fairly expressed regarding the quality of the materials used, the reasonable price and the lever mechanism. But the quality of the canvas leaves much to be desired.

Dignity

beautiful appearance;
durable design;
convenient to hold in hand;
lever tension mechanism.

disadvantages

the canvas flashes quickly.

Best hacksaw on plasterboard

When laying drywall, hacksaw has to undergo a paper structure, and then the gypsum. Therefore, the blade should not be simply solid and sharp, but also have a certain configuration of teeth. Masters are suitable hacksaws with a classic form, and novice finishers are better to use a compact and lightweight tool in the form of a knife. Experts advise paying attention to the following models.

Stanley 2-20-149 hacksaw has a durable design. It is designed to perform accurate and even propilov on such complex materials such as gypsum-containing plates and panels. For the manufacture of the canvas, the manufacturer used high-strength high-speed steel U8A. Experts paid attention to the trigger sharpening of the teeth, for hardening the cutting part is subjected to selective heat treatment. The handle not only has a comfortable shape and pleasant to the touch surface. The angle between the cutting part and the hand line of the employee is very successfully chosen. The model becomes the winner of our rating.

Users have no complaints to the quality of the hacksaw. With it, it is possible to smoothly and quickly do ripped in drywall.

Dignity

triangled sharpening teeth;
convenience when working;
two-component handle;
antifriction coating.

disadvantages

high price.

Swedish hypsaw on plasterboard is distinguished by a special configuration of the cutting part. First there is a line of small teeth (GT geometry), and then several groups of teeth are followed (4 pcs.), Alternating with depressions. Due to this distribution of the cutting elements, it was possible to increase the efficiency of sawing due to timely removal of chips and dust. The blade length is 600 mm, which is optimal for working with plasterboard. Working with hacksaw is very convenient, one of the reasons for comfort is a two-component handle.

Many decorates use Swedish hacksaw, noting high-quality manufacture and efficiency of use. Only with sharpening the canvas arise serious problems. Experts gave the second ranking tool.

Dignity

unique cutting part configuration;
two-component handle;
durable canvas;
effective sawing.

disadvantages

complex sharpening.

The most compact and convenient tool for cutting plasterboard is Irwin 10505705 hacksaw. The American manufacturer made it in the form of a large knife, whose blade has a teeth. The total length of the model is 345 mm, of which 150 mm fall on the blade. In addition to drywall, the tool copes well with wood and plastic, which makes it universal. The canvas is made of durable steel, it is aligned with the end. This form allows the wizard to drink different pieces. It is not difficult to hold in hand in hand in hand thanks to a two-component handle.

Many users enthusiastically respond about the compactness and ease of hacksaw. It has an affordable price and does not interfere with during operation. The disadvantages include low performance when performing large-scale projects.

Dignity

compactness and ease;
narrow blade;
low price;
comfortable handle.

disadvantages

low performance.

Attention! This rating is subjective in nature, is not advertising and does not serve as a guide to purchase. Before buying, you need consultation with a specialist.

Wood has a lot of benefits as a building materials. Some of the most important are the ease and speed of processing. There are many tools for this, but the most popular and simple device is still an ordinary hacksaw. However, the manual saw still needs to choose correctly, otherwise it will work with it uncomfortable or inefficient.

Criterias of choice

To purchase a truly good tool, you need to know about its characteristics. When choosing, you need to consider the following points:

the material from which the canvas is made;
cutting tool length;
convenience and reliability of the handle;
size, step and shape of the teeth.

Even if at least one of the characteristics under consideration is changed, the properties of the hand saw immediately change.

The ease of use of the tool depends on the form of handles. Therefore, if the device will be applied by one person, then its handle must be selected so that it is the most appropriately appropriately in its shape of the palm.

If the tool does not apply very often, then the comfort comfort automatically becomes not the most important criterion.

The length of the blade of the hacksaw varies within 350-600 mm. This parameter is selected depending on the thickness of the blanks that will be processed.

In this case, you should not resort to extremes, because a very short working web will have to work much longer, and a long sawing canvas can highly spring, creating additional inconvenience.

Teeth and cloth

Basically, the hacksaws are made of alloyed or instrumental steel alloys. For the device to serve as long as possible, its canvas should be made of high grades steel. The most optimal option is a stainless steel. Of course, such a tool is more expensive, but it will pay off completely. In addition, the hand-saw cloves can be hardened or not to undergo such processing. These options have their advantages.

Consignors who have not been hardening, can be sharpened at any time. Kanenic elements are stronger and reliable. They serve much longer, but they are almost impossible to sharpen.

Thinking about what kind of tree hacksaw is better, you need to pay attention to the step, configuration and dimensions of its teeth. High-quality cut depends on the accuracy and speed of the cut. These characteristics are in direct relationship - a good accuracy of saws allow small teeth.

Handsaws on a tree with a large tooth are noticeably accelerating the work, but the accuracy and quality of the cut surface is noticeably affected.

For this, there is a special characteristic - TPI. It shows the number of teeth for one inch of the cutting canvas. To achieve neat processing where quality and accuracy are important, you should take hacksaws with TPI from 7 to 11. If the maximum speed is necessary, then preference should be preferred to the tooth configuration from 3 to 5.

By the configuration of the teeth distinguish several types of tree hacksaws:

In addition to the configuration of teeth, hacksaws can have a different length and shape of the working path. You can find folding types of hand saws or in the form of convenient handles. The cost often determines the quality and durability of the product. That is, a good hand saw in rare cases is very cheap.

Most popular models

To understand all the variety of hacksaws, you can pay attention to the most popular products. The most popular products include the following:

There are other models that also deserve attention.. One way or another, but such products are recommended to take from proven suppliers.

After buying cottages, I got it necessary in good saw. At first, I thought to choose a Japanese model, because such products pass various tests and are considered very high quality. However, my bureauca was very limited, so I chose a squeeze on the saw. I do not regret at all about your decision, because the adaptation is very high-quality and reliable.

Semen Grishin

On the eve of the birthday of his spouse, I began to run shopping and look for a good gift for him. It accidentally went to the store of various instruments and decided to give him a good hacksaw, since the old one had already rusted and no first year on the balcony. The husband was very happy to give a gift, because he just wanted to do an extension from the bar.

Galina Petrov

I used to have a hacksaw of the USSR. Of course, there was a good thing, but she is outdated, and the canvas is already all rusty. He went to the store and bought Stanley Grand. Beautiful thing. Very comfortable and, most importantly, inexpensive.

Let's start by S. wooden hacksaws and other hardness similar materials. First of all, we will define the "scale" of the work - based on them, choose length of the web. If ever already begun to cut a log diameter with a short hacksaw, then you are already informed. And in the overall plan, a longer canvas "faster" is simply because in one stroke on cutting there are more teeth, and it is more convenient to cut in squeezed movements than to pull back and forth the web length "right."

Step tooth Determines the speed of sawing, and its purity: large faster, but gross small. The generally accepted measurement of the step is in the amount of teeth on an inch (TPI). That is, the number of steps less, the tooth is larger. You can see on the sale of hacksaws and with a variable step - it is denoted by a double number, for example - 11-13 TPI. For large billets, rough sawing or billet bone fuel, choose a major step - up to 6 TPI, ranging from 7 to 9 TPI \u200b\u200b- for medium-sized blanks (saws less jump), for clean work and small blanks - 10 TPI and further. At the same time, put a knife in memory: it is worth choosing a hacksaw to which there are replaceable cloths of different types, it is cheaper than buying several hacks in assembly.

Blights Maybe "raw" and tempered. The "raw" faster fastests, but it can be hidden at least a file: for nepheless work on soft and dry wood, this option is quite a worker, and the hacksaw will cost cheaper. In addition, on a nea-marked canvase, you can always correct the wiring, making it wider or already. But the kaneylene canvases with large volumes of hard work is better - constantly edit them will not have to ... But here it is necessary to sharpen the cloth already on a special machine. Especially if it is a cloth with a triangular sharpening (often called "3D") - they saw very well, but they are harder.

Hands for metal In the mass of its own - this is the development of the idea of \u200b\u200ban ordinary arctic saw - they have exactly the narrow cloth stretched into the frame. Here, when buying, pay attention to the reliability of the frame and the convenience of the tension mechanism itself.

And in any case, do not forget about ergonomics: the handle of the hacks should be "hand", of course.