Fasteners for wrenches do it yourself. Holder for wrenches do it yourself. Wall-mounted tool holder with their own hands. Grille under the ceiling

Almost all men living in their own apartment, and even more so - in a private house, dream of creating at least a small workshop with a set of necessary tools. But quite often newcomers on inexperience just do not know where to start. Therefore, the question arises - what tools it is desirable to have at hand first. And the second - as with the maximum ergonomic, to organize a workshop, conveniently placing everything you need in it.

Let's try to provide all the assistance. Today's topic: Homemade workshop - space optimization and convenient storage of tools. Some recommendations will be given, successful examples are shown. Well, it is necessary to "fit" under the existing conditions - will have to be.

Tools required for home

Even if the owner of the house is not a big lover to work in the workshop, without a certain set of tools in the farm, it is still not to do. Therefore, so that on hand there has always been everything you need, you should draw up a list and start purchasing tools. They will sooner or be sure to be useful both in the apartment and in a private house. It is clear that only people with a rather high income can afford to buy the entire set. Usually "Arsenal" is formed for several years, and you can start with the simplest.

By the way, even if the woman begins an independent life, there should also be at least some tools in the apartment too. But the list of "female set" is much more modest.

In construction stores you can find ready-made universal sets of tools. Perhaps they are suitable for those who use them only in extreme cases. In addition, often the tools in them do not differ in high quality. And most often, the home set and consumables are purchased gradually.

So, so as not to run through the neighbors in search of the necessary, each host must have the following tools:

Illustration	Functionality
	Hammer with a metal boom (head). Without this tool at all in any way. Not bad if it is a hammer-nail, that is, two tools in one. Hammers with a rubber or wooden brisk are also available on sale, but they have a specific purpose, and rarely apply in ordinary homework. It is recommended to choose a tool with a high-quality wooden or modern polymer handle with rubberized lining.
	A set of screwdrivers, which includes tools with different tips. The main ones are crusades and flat. Purpose of screwdrivers is screwing and unscrewing self-tapping screws, screws, screws. It is desirable that the kit consists of at least three screwdrivers of the main types of different diameters. They will be needed to work with both small and large fasteners. The length of the metal tip of screwdrivers can also be different. For example, for hard-to-reach, in-depth areas in which you need to screw the self-sufficiency, a long screwdriver will be required. For works, which are held on the desktop, it is more convenient to use a tool with short sting. Additionally, a tool is selected for specific purposes. For example, it is good if the kit will include a indicator screwdriver. It is necessary when carrying out electrical work, to check the voltage, location of the phases of wires, etc.
	Pliers (pliers, pliers). For homework, the optimal option will be a universal version of this tool, combining both pliers and nippers. The first will help to carry out the clamp and keeping any object, and the second easily will cut the wire or wire. Pliers handles must have isolation so that if necessary, electrical work can be produced. This tool is also needed when conducting plumbing and joinery.
	The wrench kit is required when working with threaded compounds, including with a hex head bolts. The set should include the keys of different sizes corresponding to the sizes of nuts and bolts. Wrench keys must be in each set of home tools, as they can quickly pull the fastenings of the sofa or chairs, tables and bedside tables, etc..
	An adjustable key is this tool, in principle, is able to replace a whole set of wrench keys. Without it, it is difficult to cope with the repair plumbing tasks. Remember that the key has a lot of size and quite massive, so they are not always convenient to work. In this case, it is unlikely to help if it is necessary to unscrew the rusted bolt. So it should be, rather, in addition to the set of wrench keys, but not in return to him.
	Hoven for working with wooden parts will be necessary when repairing in the apartment. In the private house without it, it is not at all necessary, as it is necessary to produce a lot of daily operations, for example, trimming trees. In addition to it, it is not bad to have a two-handed saw, if firewood is used in the farm.
	Hoven for metal will allow crop pipe, a metal rod, a thick cable, metal sheets of a small thickness, and the like. Most often the need for this tool arises from owners of private houses. By purchasing this type of hacksaw, it is necessary to immediately buy the consumables - the canvas, as they break enough.
	The ax is likely to be needed for a private house, as it is used during construction, repair, as well as for rods of firewood.
	The construction level is useful for both apartments and a private house workshop. It will help to achieve perfect evenly when hanging the shelves or paintings, putting out the floor of the floor, with masonry work and in many other cases. Depending on the purpose, its length is selected. For example, a short variant (400 - 800 mm) is suitable for small apartment works, and a long tool will fit the long tool for the arrangement of floors or aligning the walls.
	Measuring roulette is always useful both in the house and in the apartment. For example, to purchase a floor covering, carpet or other items and materials, it is necessary to measure the dimensions, calculate the area to which they will be laid or installed. For apartment needs a tape measure 3 ÷ 5 meters long. For the private house, and even more so for performing measurements on the household plot, it is better to purchase a decade with a soft ruler.
	Electric drill. This tool in our time is a necessity in any housing. In the apartment, especially if it is in the panel house, without a drill, do not do when hanging cabinets, installing some plumbing accessories. For the drilling of capital walls, it is better to acquire a device equipped with a shock function. To a drill, it is necessary to immediately buy a set of drills of different sizes on wood, concrete and metal so that it is equipped for all occasions.
	Screwdriver is an indispensable thing in the home workshop, which will help to quickly twist the self-screw or screw, drill a hole in wood or metal. With the help of a screwdriver it will be much easier to make the shelf or repair furniture items. Therefore, this tool should be every owner of the housing. The kit with a screwdriver needs to be purchased a set of holders for the bit and the bits themselves of various types.
	Electric jigsik will also become an indispensable assistant when repairing or manufacturing useful things. It will significantly accelerate the work on the preparation of material for the walls of the walls with clapboard, separates thin rails, timber, thin logs and branches in the garden plot. With independent manufacture of furniture using a jigsaw, you can paint sheet materials with the creation of complex curvilinear forms. Having an electrolybiz, often you can refuse to buy wooden hacksaws and metal. But immediately acquire a set of pylons for different materials.
	Schlifmashinka or Bulgarian is most often required for a private house, as it is intended for sawing materials having a solid structure. With the help of it, the slate is displaced, the metal is cut and grind. It is suitable for cutting ceramic or even paving slabs. It often becomes indispensable for motorists in the garage.
	The caliper is a device that allows you to make accurate measurement of products - their diameter, width, depth of holes, etc. You can find an ordinary tool or its digital version.
	The rechargeable flashlight will be easily or late in any accommodation, so it is always necessary to keep charged. For example, in the apartment unexpectedly went out the light or the leakage under the sink arose, and it is necessary to urgently find the cause of the accident. In a private house without a flashlight, it is generally difficult to do, and its use has a wider range.

This table presents only the basic tools that should be present in Arsenal any owner of housing. Of course, everyone itself decides for themselves, which of them include in the home instrumental set, and with which you can easily.

If the master's hobby is electronics, jewelry, wood carving, manufacture of metal or wooden inventory for the country area or other directions, then will require special tools intended for a certain kind of work. But such craftsmen and special councils are not required. They themselves can give their recommendations to anyone.

Organization of workshop and home tool storage

Well-equipped workshop, with a conveniently located tool and necessary consumables - this is the guarantee of fruitful quality work

In a private house, usually, in its construction, the owner takes a place for the workshop in advance. Or organizes it in a wicked or garage. It is more difficult to allocate a personal space in an apartment. But if it provides for a spacious storage room, a balcony or a loggia, then lovers to embrace immediately "occupy" this territory.

Some masters are limited to a reliable table and bought plastic containers-organizers for storing tools. Others, showing ingenuity, invent various cabinets, shelves or stands. They occupy a minimum of space and do not clutter even small rooms.

Arrangement of workshop on the balcony

If the workshop is placed on a small balcony or loggia, and it is planned to be used year-round, then it is necessary to make a number of events. Before Peresego, to create a comfortable setting in the room in the cold season, it must be inspired.

The insulation of the balcony significantly expands the functionality of this room!

Cold balconies or loggias are not used in winter, and often gradually turn into a warehouse of unnecessary trash. Why not turn it into the all-season premises? - Read in a special publication of our portal.

The second task, without the execution of which the workshop will be defective - this is carrying out the placement of electricity and the installation of lighting devices.

When the room is completely ready, you can move to the planning of the workspace. The plan naturally will depend on the configuration of the balcony. As a rule, it is a very small area, often having a width of only 1200 mm. However, even in such limits of the wizard managed to equip everything you need for comfortable work.

The main thing in the workshop is a reliable and durable table of workbench. It is equipped with a thick countertop capable of withstanding the weight of the tools. Must be taken into account and loads when applying efforts during work. The table should be well covered, so making the wiring, it is necessary to consider.

Prices for Toolbox PLASTIC CENNTRE

Plastic Center Blocker Tool Box

Shelves are fixed for storing tools above the table. And under them on the wall you can install metal hooks or other devices for the convenient location of small hand tools. There are many such ideas, and they will be told about them in a separate section.

On the table is installed the main tool, which is most often operated. If it is sufficiently voluminous, it should be placed so that there is a place for other works.

An excellent option to save space will help to keep all the tools in order, the cabinet is a cabinet. Such a cabinet involves the use of not only its main space, but also doors. On the sash, horizontal jumpers are fixed, which are not only ribbed ribs, but also functional shelves.

The set with the cabinet is also required for the workshop desktop. In the example above, it has a foldable design. However, the countertop and support for it should be reliable.

The cabinet opens and the table is declined only when it is planned to make any work. On the rest of the time it is compact located near the wall.

The design of the cabinet is simple. It is going from a bar and plywood of different thickness. Therefore, it can be performed independently under the specific dimensions of the available place. If there is no such possibility, then the cabinet can be ordered to be an experienced joiner, providing dimensions taken from the place of its intended installation.

Do not forget about the space formed under the table. There is quite a lot of space for the arrangement of closed and open shelves. To save a neat appearance of the workshop, on the shelves under the table you can set the aforementioned plastic containers with tools.

Another option to expand the workspace. We are talking about the installation under the table of exit mobile tubes and racks with a tool. Similar furniture items, naturally, the parameters will have to be adjusted under the height and width of the table. The extended stand immediately increases the area of \u200b\u200bthe working workbench, since its surface can also be used for work.

If the space on the balcony is completely limited, or it is not at all, then the mounted cabinet is suitable, which can be placed even in the hallway. The photo shows two options for cabinets. One of them has a door made from whole, and the second is from perforated plywood. Thanks to the holes equipped in the door of the door, it is possible to fasten some tools with hooks. However, this model can hardly be mounted in the hallway. The solid doors will completely hide the contents of the cabinet, and its surface can be masked, for example, a mirror. Pay attention to the set of sliding boxes in the closet. Great place to store different sorted "trifles" and fasteners.

Workshop arrangement in the garage

Another place where the workshop is most often organized - this is a garage. It is understandable, since the machine requires periodic maintenance, and a large number of tools are placed here. Therefore, it is easier to combine everything you need in one room.

If the garage is wide and long, then the racks can be placed along the long and side wall. As a result of this layout, a spacious work surface and a large space under it is obtained. It will surely fit all the necessary.

In order to safely operate both the workshop and the garage itself, it is recommended to produce floor racks, as well as hinged benches from non-combustible material. If wood is selected for the manufacture of wall shelves, it must be treated with impregnating antipiren.

If the garage is not wide enough, then there is still enough space for organizing a workshop with a work desk and numerous cabinets. The only thing to take into account for any garage workshop is the intensity of lighting. In such a structure, as a rule, lack windows transmitting natural light. And it is necessary to compensate for electric.

If there is no desire or ability to stretch racks with tools for the entire length of the garage, you can apply the idea of \u200b\u200ba retractable design of racks. Moreover, if we competely place the extended panels, then in the complex with them is quite accessible to organize the work surface. When shifting panels in one direction, a fairly spacious and reliable table top opens, allowing you to produce necessary work.

To create such a design, you will need panels, for example, from MDF. You can perform perforation - so the weight of the panels will significantly decrease, and the holes will be suitable for fixing the tools. With the top and bottom side, small wheels are fixed. In addition, guides will be needed, providing free and even movement of panels. They are fixed on the desktop and on the ceiling. Or on the regiment provided above the workbench, which will also not be superfluous.

If the garage is not only narrow, but also short, and it is necessary to organize a workshop in it, then the folding table is suitable. The tabletop of such a workbench is descended along the wall down. Well, above the table you can place a stand or hinged shelves with a tool. The area of \u200b\u200bthe garage will be significantly saved, and the tabletop will not interfere with the production of the car into the garage or the implementation of certain works on the maintenance of the machine.

An option for placing tools on stands fixed above the desktop is convenient because everything you need will always be in sight. Thanks to this location, you do not have to look for a needed consumable material or, for example, a wrench or a screwdriver of the required size. On the stands there are boxes with cells for bolts, screws, nuts and other small elements. Moreover, the box for convenience is located at a low angle - immediately seen their contents.

The upper shelves having a greater depth can be used both for storing the electrical tool and for various compositions, also necessary to perform certain types of work.

Such an arrangement of the working area can be organized both in the garage workshop and on the balcony.

The option is compact, but the spacious cabinet is ideal for small garage room. Moreover, all the necessary tools and consumables are distributed very ergonomically. The top of the cabinet is reserved for storing tools having an average size. Its lower part is a kind of drawers with numerous narrow retractable boxes. Thanks to the correctly selected height of the boxes, there will always be order in their cells, since each thing stored in them has defined its place. When drawing up a project such a closet, you must immediately plan in which box and what will be stored. Depending on this, and choose the height of the sections. Well, to make such a wardrobe - forces even the novice homely joiner.

Mobile version of Tumbers or trucks for tools solves many problems. This allows them to be used in different places of the garage, as well as on the courtyard area. Such comfortable devices do not occupy a large area, and thanks to quite large wheels and specially provided by handles, are easily transported. At the same time, there are many necessary heavy tools.

Mobile trolley can be purchased in the finished form, as they are presented in a fairly wide assortment. But she will no longer. Therefore, it is best to draw a drawing and make it yourself from a bar and plywood. And powerful wheels are easy to find in the store furniture fittings.

Useful little things when arranged workshop

This section presents some ideas of readers who will contribute to the optimal organization of the workplace. Many of them almost do not affect the family budget.

A great way to save place and always take into view of the consumables - this is contained in transparent plastic containers made in the form of cans. They can be purchased at the finished form or use to make the container remaining from various products. Some shop owners use glass banks instead of plastic containers, but they have to contact them extremely gently. The principle of their attachment is maximally simple - the caps are screwed to the lower surface of the shelves or mounted cabinets. And it turns out that these surfaces also become functional.

You can apply another approach. The side of plastic cans is cut into half to the neck, which should remain as integer. In this case, the lids are screwed not to the bottom, but to the side surface of the mounted cabinet, which is also rarely involved for storing the tools. There are open containers-bowls for all small things. An example is shown above.

If there were no plastic cans at hand, and glass do not cause confidence, it is possible to put the bottles from under drinking water, which will definitely find in every home. The hole is cut into their upper part, convenient to get parts stored in them. Rings are screwed into the lids - for ease of hanging bottles on hooks or even on clogged nails.

The lack of canister in the garage is usually not happening, and they can be plastic or metal. Any of them, unnecessary or unsuitable for direct use, can be applied with benefit. And evidence of this is a large number of ideas for their use. For example, if a good steel or aluminum canister was damaged, and it is no longer possible to store liquid compositions, you should not hurry to throw it away. From such a container, it will be a reliable and convenient container for storing and carrying tools. For its manufacture, it is sufficient to carefully cut the side of the canister. Then - protect the edges of the cut rubber sealing overlay, fasten the loops and the lock. And the inner space is divided into cells with plywood partitions and shelves. Such a container can be used to store some tools in the garage, in the trunk of the machine or on the balcony.

Depending on the shape and size of plastic canisters, you can collect boxes for the couch, rack or cabinet. The main thing - you do not have to spend a lot on Faneur and boards. Yes, and the assembly of numerous boxes is not foreseen.

In the canister, it is enough to cut one of the parties, leaving the handle and the lid is safe - and the container is ready. Depending on how the part is planned to be stored in this box, the size of the canister is selected.

Many home workshops managed to assess the convenience of magnetic bands on which bits for a screwdriver, drills, screwdrivers, scissors and other similar tools are stored. The comfort of operation is that you do not have to search and get it, and then lay the tools in place. They can easily be removed, and then fix on the magnetic strip again, not particularly distracted by the work begun.

Prices for Fit Toolboxes

Fit Toolbox

If there are magnets (and they can be found if desired), then make such an improvement in the workplace - a pair of trifles. Finished magnetic shelves can be searched in furniture accessories or kitchen utensils.

But such a fixture for storing pliers, screwdrivers, scissors and other tools can make any owner starting to organize a workshop. This requires the segments of conventional polypropylene pipes with a diameter of 20 to 32 mm. The cost of such pipes is low, and in addition, they can remain after repair. The pipe is placed and is cut into the same segments with a mock in one direction by 45 degrees. Then on the wall or board is also marked by the location of the holders. After that, on the markup with the help of self-samples through the protruding beveled edge, trained segments are recorded. Instead of pipes, segments of a durable furnace hose can also be used. Quickly, cheap, neat.

* * * * * * *

There is plenty of other ideas to improve the workshop and placement of the instrument in it. If there is a desire to make innovations in the already available place of work, or finally begin to organize it, then you can use the above examples. It is also possible to approach the process creatively, and use items for creating convenient accessories that have long been lying. Indeed, in every garage or barn, it certainly will be delayed that it is a pity, and there is no use in any way. We will be glad if you share your racks on the pages of our portal.

In conclusion, the video in which the master shares the experience of creating a convenient tool storage system in the workshop.

Video: An example of an independent manufacture of the ergonomic storage of tools in the workshop.

The garage room is often combined with a workshop. The storage of the instrument in the garage must be thoughtful. Finished structures GosNiti. are considered optimal.

Home master who wants to save, for making tool racks in the garage will be needed screw materials. Complex mechanisms equipped with moving elements, it is impossible Just storage.

To make the correct placement of the instrument in the garage and clean up, there are the following options. storage organizations:

• on shelves;
• on racks;
• in cabinets;
• on stands;
• on shields.

There are shelves of various modifications:

• hinged;
• closed;
• stationary;
• mobile.

For their manufacture use various materials such as metal or wood. For small details required hinged shelves. They are usually located at the chin level of the garage owner. If inventory has to frequently use, it is better for him open structuresAnd in closed stores unnecessary things.

See how you can make an interesting storage of the garage tool with your own hands:

Direct competitors of mobile shelves are movable boxes. In the device there are specialized containers under the tool.

Factory racks for the tool in the garage are manufactured in accordance with GOST. These ergonomic designs are easy to make with their own hands. To store large aggregates or tires, you will need large racks.

If you want to make a cabinet for the instrument in the garage with your own hands, then there should be special drawers or bags. Such storage allows to avoid Dust hitting. Can also be rational to use side walls. With the help of special fasteners for the instrument in the garage, the place is equipped for fastening Rubanka. On the doors can be placed rubber hose pieces.

A skilled master will make a stand for the tool in the garage with their own hands. Material for its manufacture serves sheet of chipboard. Additionally, as tool holders use metal cans from canned.

How to store tools in the garage?

Convenient storage destination is considered shield, or storage panel, or simply toolboard in the garage. Screwdrivers, spanners, pliers fix on them. To make a shield for the tool in the garage with your own hands, use an array of boards and durable hooks. Equipment depends on the master's own preferences.

How to place a tool in the garage on the wall - Photo:

As you can see in the photo, the storage of the tool in the garage with your own hands is not at all difficult. Only a desire and some patience are needed.

Storage of keys with tools on the wall of the garage

How to fix the tool on the wall in the garage? The optimal tool storage system in the garage involves the use whole Square wall.

1. After installing horizontal guides, they suspend section-shelves. Such little things like nails and self-tapping screws can be put in plastic banks in which mayonnaise or horseradish was. Their covers are screwed to the shelves.
2. Can be done under nuts, washers, scissors and keys stand In the garage do it yourself. Special loops do from wire. On the detachable ends rip the washers with nuts, and the size of the accessories indicate the cardboard labels. Scissors with keys hang on metal hooks.
3. For drills, cutters and storage of keys in the garage to the wall attach lining from foamflast. They are firmly fixed in the elastic material and are easily removed from it if necessary.
4. Another method of fastening for the instrument in the garage is a disposable plastic plastic plates. If you cut them into two equal parts, it will turn out billets. Then they attach to the wall using self-tapping screws. The resulting pockets are used to store disk saws or grinding circles.
5. For storage clamps are recommended to apply rectangular plywood box. It is attached to the wall and then pens of clamps are placed in it.
6. Durable wall mounts are designed to store bikes. Their foundation must be metallic.
7. In order not to lose the screwdriver of the desired size, to store them use magnetic holder. Then they are always in sight.
8. From hooks with stationery clips-clips Clevero will quickly produce facility for the canvasintended for ribbon slabs.

Convenient option for storing tools in the garage, which does not take up much space:

In many cases, the garage serves universal workshop. Here the tools are stored for all occasions: and for the repair of the car, and for the repair of home furniture.

This feature is significantly expanding if the garage is built with a country house or in the country. Here the owner is simply obliged to be on all hands master - Get the wiring to the gazebo, sharpen a knife and an ax, repair the lawnmower, fill and lubricate a snow blower, exhibit a new wooden bar for a converted support for grapes ...

All these troublesome works require various tools and deviceswhich you probably have a long time ago.

But how are they comfortable and rationally place?

Zoning garage space

First of all, let's go to the garage with a tape measure, a pencil, notepad and hard desire to get rid of, finally, from the trash, who was sorry for years to throw away - what if it would come in handy?

The basics of the design of such production and warehouse household premises suggest their clear functional zoning.

But meanwhile, you have long been, without knowing it, they distributed the garage on the functional zones.

In one, at the entrance, stored something necessary at hand daily, and in the far corner dust rarely demanded. Small tools are folded into a small box, heavy hammers and sledgehammers rust under the wall on the floor. Somewhere with a handful of tanks with antifreeze and oils for the transmission.

This intuitive distribution we apply, designing ordered placement of toolkit.

First catch and draw

Determine wall, along which we will construct racks and shelves for tools. Data on its height and width, recorded in notepad, will be starting point For the drawing of future storage facilities.

By making the decision at the placement of the tools, we divide, in turn, "Instrumental" zone On clear structures where tools, fixtures and fasteners will be:

• for car (plumbing);
• for electrical work;
• for welding work;
• for carpentry work.

Shelves for the instrument in the garage do it yourself: materials and design

Design of tool rack and materialFrom which it will be manufactured, will determine the size of the free space in which it will be "to" enter ", as well as your technical fantasy and acquired or completely the absence skills of such work.

In any case, it is reasonable to prevent your own project by visiting Internet sites of garage homemade workers, where successful garage interior projects have been exhibited for everyone.

But the main factor of choice is your budget. The amount you are willing to spend in the name of garage comfort.

Shelves for the instrument in the garage do it yourself - photo:

Convenient and simple rack

The proposed tool rack is only a concept, sketch of one of the possible designs, so there is no point in the exact dimensions. Dimensions you fill your individual project.

Based on considerations of strength and durability, we will make a solid rack along the wall of the garage with a double shelf from a steel corner 50x50 mm. Shelves make from edged boards 4-5 cm thick.

We will need a Bulgarian with discs for cutting metal, welding machine, pair of packs of electrodes, electric drill corner, water level, joinery knife, roulette, marker.

The number of carrier racks depends on the length of the shelving. The step between them (respectively - the length of the shelves) is determined in 1 m.

Important: The width (depth) is laying the shelves with such a calculation so that they do not interfere with open the doors of the car, which carved into the garage. If this condition is observed, the comfortable width of the shelves will be 40-50 cm.

Place the corner, cut and weld the rectangular perimeter of the rack from it. According to the drawing, we get, cut and weld into the perimeter transverse corners to which will be rely wooden shelves. They are designing different heights, based on the dimensions planned to the placement of instruments.

Do not forget about special nevable section For boxes with fasteners.

The first shelf is placed on height 60-80 cm from floor level garage. In this lower space, we will place canisters for fuel, bulky and heavy items, spare aggregates.

Stands weld To the rods driven into the wall of the reinforcement. At the top and in the middle of the welding, we link the racks of the rack with a horizontal jumper from angle or steel strip.

Now it's time to take the hacksaw and under the size of cutting the boards. Before installing the shelves board impregnate hot oil, Every day you can paint.

Hang everything that can be suspended

Sets of cape wrench It can be convenient, clearly and beautifully sprinkle to increase the size on brightly colored boards attached to the wall in the depth of the shelves of the rack. You can glue each key paper sticker, Largely printed on the printer, or write the numbers from the hands of the wrong marker right on the board.

Maximum use vertical surfaces, in the same way, hang on the side walls of the hammers, ticks and other tools with a configuration suitable for this placement.

Look at an interesting video, how to make a keys in the garage with your own hands:

Conclusion

Many motorists have garages for a long time excellent equippedThe tools are placed rationally and convenient - so that they can be taken from the usual place with their eyes closed.

Please tell us about your comfortable garage, share your experience with novice colleagues on this truly male hobby.

Many men use a garage not only as a parking lot for the car. Often the tools or old things are stored in the garage, which are sorry, and there are no places in the apartment for them. Also in the building, repair or other works are often carried out, requiring the presence of a tool and overall material. Thus, the structure often becomes like a warehouse.

Wall or pendant shelves in the garage - an excellent way to store a variety of things without litigation of the useful area of \u200b\u200bthe room.

Durable and reliable material is designed for large loads. Metal shelves withstand a lot of weight, it is convenient to store items, tool. Also, the metal is distinguished by durability and wear resistance. If the material is covered with a special composition of corrosion and rust, then many dozens of years can serve the designs of it.

Unlike metal, wood is more affordable. Easily refractable to processing, does not require welding. Wooden shelves can also serve for a long time, the only drawback is low resistance to changes in the temperature and humidity regime.

To improve the wear resistance and durability of wooden shelves, it is required to periodically cover the material with special covering paints. This will help wood avoid rotting, deformation and damage by pests.

The remaining materials, such as plastic, plywood, stone, are quite rarely used for the manufacture of shelves.

Constructive variations of suspended shelves

Can be open or closed. With the back wall or without. Most often, a metal corner and a wooden base is used for the manufacture of such structures. They hang on the walls on the anchor. The fastening type can be permanent or dismantled.

These designs are made of a metal corner, a wooden base, a special cable or a metal round profile, fixed on special anchor, is used as the side walls.

These shelves are suspended on special hooks, driven or boiled overlap ceiling beams. Advantages of ceiling shelves - quick disassembly in case of need. Disadvantages - a pretty shaky design, which can sway from touch.

Store on such shelves expensive tools or fragile things are not recommended.

Tool Shield Shelf

This design is equipped with small shelves for storing small things and special suspended fittings. The shield consists of their durable rear wall, fixed in the wall on the anchor. Shelves, special hooks or holders for the tool are mounted on the wall.

This shelf is very convenient for carpentry and fitter work. Most often, such a shield is suspended before the workbench so that all the necessary tools are at hand. Sometimes the shield is equipped with additional lighting in the form of a lamp on a moving leg.

If there is a desire to save the useful area of \u200b\u200bthe room, you can make a hanging shelf with your own hands with an attachment to the ceiling.

Materials required for making design

Tools for work

1. Drill with a tree drill. The diameter of the drill must coincide with the diameter of the hairpin.
2. Perforator for drilling holes in the ceiling under fastening anchor. The drill must have a little smaller size than the diameter of the anchor.
3. Wrench keys, their marking should be approached under the dimensions of the used nuts.
4. Electrolzik.
5. Screwdriver.
6. Bubble level.

Order of work

Step 1. To begin with a sheet of plywood or fiberboard, the shelf of the desired width and length is cut.

It is worth knowing that it is recommended to place the bearing studs with an average load on the material after 60-70 cm. If the regiment is longer, then with the plywood time or the Fiberboard sheet will noticeably zone and offers.

Step 2.To enhance the strength of the material, a metal profile equipped with internal rigidity ribs can be secured.

Step 3.At the edges of the shelf there are holes for studs. It is worth knowing that it is desirable to drill in 5-7 cm from the edges of the plate. If the holes are located too close to the ends, the material can be cooled under the weight of things located on the shelf.

Step 4.After the holes are drilled, the shelf is required to apply to the ceiling and with the help of a pencil move the location of the holes on the ceiling. Thus, the design will be located without distortion and you can not be afraid that the studs are deformed.

Holes for anchor drill in the ceiling, dust removes from them. Anchor robbed into concrete until the nuts are tightened.

Long metal studs are connected to anchors placed on the ceiling. A connection is recorded using nut-couplings. It is also desirable to inspire a connection to an additional ordinary nut, which turns on the threads of the hairpins.

Step 5.After the studs are firmly fixed on the ceiling, the period of installation of the shelf occurs. Nut rushes on the heel, then the washer. After that, the shelf rises on the ends of the stud.

The fixation of the shelf is carried out using the grovers and the control nut. The washers protect the holes of the shelf from the break in the loads. Grover serves as protection against the development of the fastening nut. You can use two nuts for safety and greater strength. The ultimate fit of the fastening fittings is carried out by level.

Such a suspension regiment will significantly save space in the garage. The only drawback is the mobility of the structure. It is possible to eliminate it with a special metal corner. One edge corner is attached to the wall, the second is to the base of the shelf. Thus, fixation of the entire suspension design is carried out. Also, the metal corner will harden the shelf, which will affect its durability.

Shelves-shield for tools do it yourself

In order for the entire small tool to be at hand during the plumbing or joinery, you can think over and make a special shield. Shelves shields do not differ in large capacity and strength, they cannot be stored a heavy tool, but for small and necessary things that are always lost, such a design will be perfect.

It's important to know!

1. Sweep the shelf with a tool is preferably on a plastered wall, otherwise condensate will accumulate between the brick or block surface and the wall of the shelf. Permanent enhanced humidity will adversely affect the shield material, can cause its deformation or rotting.
2. The average load on one square meter of the shield surface should not exceed 14 kg. The weighting of the structure will result in rapid destruction.
3. The height of the shield is caused by the growth of the owner of the garage. The top edge of the shelf should not be higher than human growth. Otherwise, it will be inconvenient to take tools from the shield.
4. If the shield is thought out on the shield, it is not advisable to make them closed. It will also complicate work. All small tools and parts must be in the open access.

How to make a shield with your own hands

Materials and tools

Step 1.First you need to select the shield size. Most often, such a regiment is fixed before the workbench, followed by the person in repair work. It is desirable that the shield in width was slightly more freebies of the workbench.

Step 2.Then the shield is cut from plywood or other material. Immediately there is a place for small shelves.

Step 3.Then the shelves with side walls are fixed with the help of the electrolybiz. The side walls of the shelves can be made of the same size as the length of the shield. Next, using long screws, the design of the shelf is collected and attached to the surface of the shield. Place for storing jars and boxes with nails and other small things are ready.

Step 4.Attaching hooks. To do this, the holes are drilled in the shield and the dowels are driven into them and special thread hooks are screwed. It is advisable to think in advance where and what tool will be. Based on this and the hooks will be brought.

Then an eyelers or brackets are attached to the back wall for fixing the shelves on the wall. The last stage is the installation of the shelf on the wall. The holes are drilled by the hole, the anchor is driven into them. If the shelf is attached "tightly", then it is possible to strengthen the fixation of the structure using a special washer, which will prevent the slipping of the faces from the anchor.

A simple and comfortable shield for tools and parts is ready. If there are all tools and material available, then you can make it in a few hours.

Video - Small shelves on the wall storage and other tools

Perforated panels are needed to organize work in the garage, workshops and in the car service. They successfully complement the bedside tables with racks in achieving the best ergonomics in the workplace. If you place the tool, which is involved most often, above the workbench, then you no longer have to be rummaged in the boxes in search of the necessary things. Also quickly and convenient the technical cabin is hanging back after use. At the same time, after the end of the labor day, it is visually clear that once the hook is empty, which means the key lost or remained, for example, in the car during the repair process. You need to find it and hang back. We recommend using perforation, even if the snap is stored in the bedside table. During the repair, when you change various devices, a mess on the tabletop is involuntarily created. If all you work to hang on the suspension, the surface is exempt from unnecessary items. Hang the key is much more handy and faster than constantly laying devices in boxes. On the holders is not only a tool, but also consumables. So, for example, in the case of works associated with the electrician, all sorts of terminals, Cambricks, isol, and engage in embroidery, are very convenient to store a set of threads on the panel. An occupation of a favorite hobby brings more pleasure, manual labor delivers additional comfort when the workplace is in order.

The perforated shield can be installed on or attached to the wall with self-draws. Especially for this, its dimensions correspond to the length of floppy, single-channel and dual bulb models. The screen is attached to the table with special racks and brackets. It is possible to install one or two panels. Cutouts on the panel flapping are made in such a way that it can be hung horizontally and vertically, which helps to optimally fill the area, bypassing the available communications and relief.
Installation on the wall is quite simple. On the back there are 4 curly cuts. 4 screws are screwed, and then the panel hangs on them as wall clock. You can make marking before drilling with any subtle sharp nail or sewing from the front side.
The hole of the holes is 15 mm. This allows you to most fully fill the shield with a necessary tool. The distance between the centers is 30mm. The diameter of the holes of the perforated screen - 5mm. For screwdrivers, grippers, and other small items, special . The wall perforated model is used to accommodate heavy things.
The products are painted with a polymer coating that is immune to the temperature differences and the effects of aggressive substances.

A variety of thematic forums on the Internet are fascinated by reports, how to clean up the perforated panel. With us your desire will be a reality. We will help solve specific tasks.

Perforation loads

The length of the perforated panel		1000mm.	1390mm	1900mm.
Perforation is hung on the wall	"Standard" series	68kg	60kg	60kg
	Light Series	55kg	50kg	50kg
If the perforation is installed on the brackets on the workbench, the distributed load is 100 kg.

A comfortable wall-mounted tool holder, created by their own hands, will appreciate any man. Such a device allows not just to keep in sight and at the same time at hand all the tools, but also contain them in order, freeing all the work surfaces. How to make a similar chalkboard on magnets for your workshop or garage yourself, then in step-by-step instructions.

Materials

To work, you will need:

• boards;
• chopsticks of hot glue;
• screw-hooks;
• thermopystole;
• acute knife;
• magnets;
• tools themselves.

Step 1. First, remove the measurements from the wall and decide on the dimensions of the boards, which will be the basis of the holder.

Step 2.. Pick the boards to the parameters indicated by you and sand the spins.

Step 3.. Put the boards on the work surface. Prepare magnets and tools themselves.

Step 4.. Spend a draft fitting where, how and what tools will be attached to the board. They should be located at a distance from each other so that while working when taking any of them, you did not cling to your hand neighboring. Think out the mounting options for each tool.

Step 5.. Mark the fastening locations of the magnets with a pencil. Plant magnets on hot glue.

Step 6.. If everything is clear with small magnets for oversized and not heavy tools, then such a long magnet lane can be taken to attach a row of screwdrivers.

Step 7.. To attach stationery knives in a plastic case, you will have to glue a small piece of magnets to them. Otherwise, the knives hold onto the board will not.

Step 8.. If you have tools, the metal of which can scratch the holder and over time strongly spoil the appearance of the board, for example, how to attach a piece of heat shrink tube over the magnet. Magnet Himself take more powerful.

Step 9.. To attach a mini-spotlight, which is used during soldering or other minor work, plant it with the base on the metal plate and screw to the blackboard already with its screws.

Step 10.. Set of drills and bits for convenience, attach on the hooks. By purchasing them, pay attention to the models that are fitted with the ends of which are similar to Samores.

Step 11.. Long flat metal line Site immediately into several small magnets, placing them at a short distance from each other.

Step 12.. Saw with an aluminum handle to fasten a little more difficult, as aluminum magnets worse. To do this, you will have to drink a slightly to change a little, while sticking onto it a metal part.

Step 13.. In order to keep heavy screwdriver on a vertical board, secure them to neodymium magnets or pieces of magnetic disks. They are much more powerful than usual, and they will cope with this task.

Recently, various workshops are firmly entered into use of the perforated panels for storing tools. With their help, it is convenient and compact can be located any working tool in production or in the auto repair shop. Another cabinets or layouts perforated panels have such design and functionality that allow you to equip the storage for any needs. They can be made of different material and are complemented by convenient layouts.

Perforated panels - description and materials

The panel is a sheet of wood-chip or metal with rigidity ribs along the edges and perforations on the working plane. Such holes allow convenient place and comfortably use Tools, small equipment, construction materials.

Punching layouts allow you to save the workplace, keep the necessary tool is always at hand and control it. Equipped with such panels workshop will have a modern look, and various working devices will always be at hand.

Sheets with perforations are attached to special brackets, and the tools are placed on them using holders, shelves and hooks. However, you can find cabinet panels that are mounted without any mounts.

Perforation sheets:

1. On average, the height of such products is 200 centimeters, and the width is 100 centimeters. For various workshops and garages, lists can be made with large dimensions. Their width can exceed more than two meters.
2. The minimum layout size is 50 centimeters width and 100 centimeters height.
3. The thickness of the chipboard can be up to 7 centimeters, and metal - from 1 millimeter.
4. The diameter of the perforation is 5 millimeters, and the distance between the holes is 15 millimeters. This allows you to fill the panel as close as possible and it is convenient to position everything.
5. The step between cocoic fastening centers - 30 millimeters.

However, it is necessary to remember that the size of the general dimensions of the product is calculated, while the work surface itself most often has quite modest sizes. That is, with a design height of 150 centimeters, on the perforated surface used may have to only 50 or 100 centimeters.

The building materials market offers many different sizes of panels, so there is from what to choose to arrange any workplace.

The areas of application of perforated layouts are unlimited, however, for each case should be selected product with specific characteristics:

• durable metal structures are well suited for professional workshops;
• small sizes of the sheets will come by the way in the sub-economy or garage;
• multifunctional layouts in the form of screens and modules are widely used in manufacturing and industry;
• products with various additions found their use when arranging showcases in construction stores.

Available at the cost of laying to store tools are simple for installation and easy to operate.

Advantages of metal products:

Most often made perforated panels in two color colors. They can be white or under a natural tree.

The disadvantages of metallic layouts can be attributed:

1. Mandatory mount for fixing the sheet of horizontal plates.
2. In comparison with the MDF models, the price is quite high.

Perforated wood-chip panels

When choosing layouts from MDF, it should be borne in mind that in conditions of increased operation, they are not able to provide adequate wear resistance.

Because of the small strength of the material, the tool storage products are manufactured in small formats. Their standard size is 60x60 centimeters. Such layouts are strong enough do not deform and bend. In addition, they are easy to transport and install in the right place.

Perforated MDF panels are designed to store only oversized tools. With their help, it is possible to conveniently place and operate hammers, wrenches, screwdrivers, etc. At the same time, choosing such products for its workplace, it is necessary to remember that with high humidity and high temperatures, their life will not be long.

Accessories for perforation panels

It rarely happens that only a sheet with holes is enough to keep the tool. Therefore, most often perforated layouts are sold complete with various holders and fasteners.

Methods for mounting perforated layouts

You can place panels on various surfaces.

Wall lists The most popular variety of designs. They are fixed directly to the wall and are attached to special screws. With the help of such layouts, you can save the space of the room and, at the same time, to comfortably use the working man.

Panel with perforation for fitter workbench Movement accordingly the length of the unit. Their size can be submitted under a double-leather, single-channel or bachemic workbench. Constructs with special brackets and racks. In addition, two panels can be installed on the workshop.

In the middle of the room can be placed modular screens or systems. They will also perform zoning feature.

Rear layouts It is convenient to position on the racks from the pipes or other corresponding profiles.

It is worth noting that from where the placement of various additional elements depends on the panel.

Varieties of perforated panels

Layouts with decorative effect

To ensure the aesthetic effect of solid fibustaries, sheets with HDF perforation are manufactured. With their help, you can mask some interior items, as well as separate the room into separate zones.

Such structures are different durability and decorativeness. With their manufacture, phenol does not apply, so they are environmentally friendly. Warfather material is able to cope with wet and any temperature effects, so layouts made from it can be installed in almost any room.

Sometimes it is necessary to move or transfer sheets with equipment to another location or room. More convenient to do this with special mobile layouts equipped with rollers or wheels.