Hanger do it yourself drawings and schemes. Outdoor hangers (including racks) for clothes, costumes, shirts, trousers. From the old tree

There is a large number outdoor hangers for clothes. At home, this is very relevant and practical furniture that fits perfectly in any interior. Such hangers can easily move around the apartment and room. Things in this case thinks much less than in the closet. For it, a cover protecting against dust is necessary. This design can be made and with your own hands. Let us consider in more detail the process of manufacturing various models, which will also be presented in the article.

Dignity

Stylishly fit into any interior and does not take up much space.

Good such thing is that hanging clothing It does not contact the wall, and this allows you to protect the wallpaper from damage. In this case, the device can be folded at any time, remove or rearranged, which is very important in small apartments.

If it is made with your own hands, the following advantages appear:

• cost is significantly reduced;
• is in the exclusive interior item;
• no need to drill holes in the wall to hang it.

Necessary materials

Consumables can be absolutely any: from oak, to metal.

How to make a rack do it yourself? First you need to decide on the material. Plywood is suitable for work, these are the most practical materials with which you can easily work. When it is operating in the house, it is not exposed to moisture, which significantly increases its service life.

It is difficult to work at home with plastic or metal, so it is better to refuse them. It is necessary to take into account the moment that there is a large load, therefore, the materials are needed by appropriate strength that do not allow me to break.

By purchasing a fane or wood, you need to pay attention to their quality, as the appearance of the product will depend on it. Typically, the design of oak is covered only with varnish or verses.

From wood plywood

The process of creating a product, with its subsequent application for clothing storage.

Moose this product itself is easy and there will be no much for it. materials and tools. For this product requires two sheets of plywood with a size of 70x170 cm and a thickness of 18 mm. For work you will need:

• lobzik;
• glue;
• sandpaper.

The manufacturing process itself does not take much time. First, on one sheet of plywood paint the contour of the future design. The main thing is to have a width of about 60 cm. It is necessary for sustainability, because if they are narrow, it will fall, if you hang heavy winter clothes on it.

In order to do not draw a picture on the second sheet of plywood, you need to make two sheets of plywood using clamps or screws, then the sheets are then shifted. To convert billets into the finished product, two slots make. On one billet, the slot makes top to the middle, and on the second bottom. These slot width must correspond to plywood thickness.

On the inside, both slots follow carefully treat glueAnd then one blank is put on another. As a result, it turns out a rather original thing, the photo of which can be found on the Internet. It remains only to polish and paint. It can be decorated in different ways or simply to cover with varnish, mourn or paint.

From the trunk of a tree

A very original solution is the interior items that look like a branch or trunk with bitch. Such things always harmoniously fit into any room.

Good designer solution - This is a rack from natural natural material, namely from the trunk. It is very simple and there is no need to acquire special tools.

How to make it with your own hands? To do this, you first need to find a high-quality blank made of dry logs, on which it will not rot. The breed does not matter, but it is better not to use coniferous rocks containing a large number of resins. The glue is able to stand out even from the dry barrel. It is advisable to use deciduous rocks that have a good branching, so there was more space for clothes.

His It is necessary to clean from the crust, the lower branches of cutting up to the height of one meter, and the upper shorten, leaving the bitch, to which you can later hang clothes. After that, the rack is completely grinding and purified from irregularities and contaminants. If the wood is damaged by the core, it does not hurt, because it creates a surprisingly beautiful pattern, perfectly inscribed in the design.

Then it is necessary to make a stand, because the trunk of the tree can not stand independently. The main thing is that the stand is massive, it makes the design more stable. The stand itself can be any shape: round, square, triangular.

Photo Gallery

The foundation is attached to the stand in different ways. For example, if his lower part is rather thick, the board can be screwed to it using self-tapping screws, whose caps will be located down, so they will not be seen. If the bottom of the barrel is thin, then in the stand they make a hole, the size is not larger than the diameter of the barrel itself, after which the base is fixed on the stand using glue, since this method is the most reliable.

After it is made, it is necessary lacquerTo preserve the natural color. But if the light system does not fit under the design, you can use dark paint.

In the form of a staircase, do it yourself

Old and unnecessary stairs, also, you can use and give them a second life.

Highly look original - in the form of a staircase. To make it yourself, you will need two vehicles with a length of 170 - 180 cm and 5x5 cm thick. For the crossbar, three smaller bar will need, the length of which will be equal to the product width. All bars need to poll or treat the planer.

So that the design looks neatly and beautiful, all parts are interconnected with spikes. After that, the product is covered with varnish and mourn. Comfortable and comfortable rack for clothes with your own hands is ready. It can be installed both in the bedroom and in the summer house.

In rustic style

Such a design will fit well into the corridor or the hallway, and under it you can put shoes. This model is not easy to make himself. First, in the intersecting round racks make the holes of a large diameter. The household tool drill holes in round parts is very difficult. To get around such an unpleasant nuance, you need to take square racks and with the help of drill to make the holes of the desired diameter in them. The crossbar is best taken metallic, as it will be fed. This model can be disassembled. For this, the holes are removed from the holes, and the parts of which the hanger consists are compactly folded.

On wheels

The wheels are very comfortable and make a thing very mobile.

Such a design from above has ordinary shoulders, which is very convenient for the placement of blouses, shirts and jacket. Pants are more convenient to hang on the crossbar. Thanks to the wheels, it is easy to move to another place.

To make it with your own hands, special fasteners will be needed. Vertical racks are attached to the base using metal screws. The only complexity is to drill holes under the screws in vertical racks. The rest of the assembly is quite simple. The disadvantage of such a design is the need for its disassembly during transportation. To do this, you need to unscrew the long bolts from the vertical racks.

Thus, there are many ways to make such a hanger for clothes with their own hands, the photo of which was presented in the article. This is a very simple element of the interior, for the manufacture of which will require an affordable imaginary material. Typically, special tools are not required for work, and as a result, it turns out a unique and exclusive thing.

Press the class

Tell VK

Wall hanger in the hallway is an important storage element. Many apartments planning have narrow corridors in which the full cabinet is not always obtained, so the owners are looking for alternative options. I want to keep the design of the apartment, comfort and ease of use.
Variations of hangers can be a lot from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.

Most popular materials for the manufacture of hangers: wood and metal.

Forged metal hangers are striking with the beauty and smoothness of the forms. They are used in the interiors in the style of Provence and Art Deco. This embodiment is attached to the self-tapping screw, and more often they are hung on them.

This option of hangers can be attributed to horizontal. Their function consists only in keeping upper clothes. Metal hangers often have a shape, which gives them paintings.

A variant of a combination of forged elements and leatherette or tissue is very interesting. Looks unusually and luxuriously. Such a hanger will issue any corridor and will become his highlight.

The photo presents combinations of materials: wood with a cloth and metal with a cloth. The functionality and uniqueness of products are preserved. In the first embodiment, the tree gives an array and the founding of the furniture, and on the second, the metal facilitates the composition and gives the grace.

Wood hangers can be mixed with a mirror, a shelf for shoes or for head instruments. The photo presents a very compact option of the hallway.

A hanger may have sections: for short and long upper things, which allows you to prevent pollution on the wall.

A hanger from a tree is finished with a shelf and a mirror, also an excellent option for small vessels.

When choosing a material, it is necessary to navigate its strength, whether the finished product will withstand heavy winter things.

For this feature, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.

Materials can complement each other carrying their functions. Metal, as more durable, is based on the construction, and the tree as decorative elements.

Ideas of hangers in the hallway from the girlfriend

I picked up a lot of ideas when the hanger was done with a soul of girlfriend. This can serve as inspiration for many families. I believe that in the interior you need to leave the pattern, because any design is unique with your non-standard solutions.

The photo is quite ordinary segment of the board segment made in the marine style. The corresponding background and hooks in the form of anchor attach to the entire hallway.

An interesting forged light option may not quite from the girlfriend, but there is a place to be. Very functional and elegant option, contains a stand for shoes and for hats.

United in the form of rhombuses, rails with wooden hooks, it looks very eco-friendly and stylish. Placing hooks at different height allows you to hang a lot of things and do not create an untidy bunch.

The curved sheets made of thin aluminum are peculiarly decorated with walls. And make such a hanger at home will be very easy. To do this, you can buy a sheet of thin aluminum in building stores. This material easily cuts and pretty suppliance.

Hanger of pallets is the most affordable and modern version of the hallway decor. Creates an atmosphere of the loft and suitable for non-standard young people.

And, most importantly, that completely eco-friendly and strong material. With the help of corners and screws, you can also build a stand for shoes and a shelf. You can simply cover with varnish or verse, then the beautiful pattern of the tree will last, and you can paint with color dense paint under the overall tone of the interior.

For minimalistic designs hanger in the photo - just a find. Convenient, without unnecessary parts and looks very stylish. Inside the rod is inserted, which allows you to make shoulder from the hanger.

I will give a small master class on the manufacture of wooden hangers hangers. It turns out two rows of hooks. The option is unusual, but very functional.

Having a different width racks, you can create the simplest version of the furniture, simply allowed the hooks and adding transverse crossbars for fastening.

For nature lovers, you can use images of animals and birds, and artificially aged wooden product will give the story a horizon.

An interesting option to combine two materials: wood and metal. Modern compact hanger with built-in hooks.

Many times have met the ideas of hooks from cutlery: forks and spoons, like on the bottom photo.

An interesting version of plastic hangers for a small family. In the summer, only the role of decor can perform.

Wall hanger from wood with their own hands

To make a hanger, you need to take several boards or ready or purchased in the store. You can use any wood: pine, oak, birch.

We will analyze two options for hangers.

Cut out the same sidewalls, top and middle crossbar, to which you need to roll the hooks.

Cut out beautiful bends on the sidewalls and all the details of the hook.

We connect to the finished design with self-draws, furniture corners.

We look at the hook places and weiss them.

The finished product is tested for strength and covered with varnish.

You can make an even simpler version of the clothes hangers.

The photo presents the diagram and dimensions of the future product.

We take purchased boards or lamellas, in this case the wood of pine was used.

We measure the same distance between the vertical parts and from the wrong side of the Frame Frame. We assume any fasteners. The shelf will be hung on the self-tapping screw.

On the front side at the same distance from each other, dripped hooks. And admire the result obtained.

This hanger model can be supplemented by a shelf, give contrasting colors. The photo presents the option when the crossbars go not from the wrong side, but with facial.

Tell VK

Modern sewing and marketing technologies are able to provide us with a truly limitless amount of clothing. And all it must be laid out somewhere and hang. For dry and clean, an enclosed wardrobe with shelves and a barbell under the shoulders. However, removed after working day, wet or dusty clothes in the cabinet the road is closed. For such cases, there are outdoor hangers.

They are also good because the volumetric items of the wardrobe when placing on such a hanger are not in contact with the wall, resulting in the wallpaper, and the clothes itself are not damaged. At the same time, the hanger can be folded at any time, remove, rearrange, which is very important in small apartments.

If you make it with your own hands from the girlfriend, then such advantages appear in it:

• the price is significantly reduced;
• the indental owner is enjoyed that waste from repair went into business;
• the hanger turns into an original, exclusive subject of the interior;
• any beautiful, the good-quality thing works on a positive renome of his author.

Outdoor hangers: types of materials and structures

If desired, the hanger can be made from any durable material, but most often apply:

• tree, especially fine-layer (walnut, birch, beech);
• metal, such as trimming profile or reinforcement;
• polypropylene plumbing pipes.

Structurally, outdoor hangers are divided into several different categories.

1. Original, she is a hanger lamp, or hung. It is a vertical bar on a support in the form of pancake or legs; At the top there are hooks for clothes and hats. It takes a minimum of space, highly arranged hooks exclude injury. But such a design is easily falling due to the low support area. Used to accommodate jackets, raincoat, coat in the hallway.
2. Fireman theatrical dressing room. Long hanger on an arbitrary number of hooks, which can be placed in several rows. Stability is provided by wide legs, which, however, occupy a lot of space. It is rational to put it in broad halls at the rate of a large family and frequent guests.
3. Foldable frame. A small, half of the human growth hanger, designed for storing the costume in collected form. The upper frame element is made in the form of trempel - shoulders under a jacket, a shirt or blouse, the second element involves the placement of the trousers. Special hooks under the tie and belt are possible. Solid looks in the bedroom, it is easy to fold and removes the closet or under the bed.

Attention! Any outdoor hanger can fall to fall, so if there is little small children in the family, it is better to choose a wall-mounted version.

Do it yourself a beautiful tree hanger

For the manufacture of a good-quality hanger under a casual suit, a conventional set of tools will be required, which includes, among others, drill, screwdriver and hammer. The work will consist of the following steps.

1. Choose a drawing taking into account the size of clothes and size of the room.
2. We harvest materials. Pine is considered ideal for independent treatment with wood. Pine timber buy in a construction store with a margin, given the possible marriage in the work.
3. Drink out the drawing details. Where necessary, we achieve symmetry. Flat parts process grinders, curvilinear - sandpaper.
4. We select Self-tapping screws on the tree of suitable color, place places for fasteners and drill holes, the diameter of which is about twice as smaller than the diameter of the screws.
5. We collect the product, chewing the screws manually.
6. We proceed with a mourn and varnish.
7. On the details in contact with the floor, we stick soft strips of felt. If you wish, you can provide racks with wheels.

Council. Raise the rod for trousers higher, then, if necessary, it will be possible to place a few shoulders with shirts across it.

Original hangers can also be made from:

• served as a lamp, replacing lampshade with hooks; The metal rod can be shaved with a rod or rattan;
• the backs of the old chair separated from the seating along with the rear legs;
• small dry wood fixed on a solid base.

Council. The hooks discover from the branches of the branches of the unnecessary Christmas tree are originally observed.

Pipe rack: Creative and economical

After repairing the plumbing site, there are always many PVC pipe trimming, which thoroughly sorry, and to accommodate nowhere. Of these, the original hanger lacker can turn out, especially if you put it in the bath or in the country.

The main problem of such a hanger is its stability, so the basis must be made as hard as possible. To do this, in the segments of the pipes from which the base is manufactured, sand or gravel is covered, after which the ends are closed with plugs. The procedure for the next.

1. We draw the design of the hangers and celebrate all straight pipes, fittings, splitters and plugs on it. Document you need.
2. We remove burrs (sandpaper) and dust (cloth).
3. Stretch through all the details of the rope and stretch it in the work room or in the courtyard. Mobile spray-paint in the right color and leave to dry for two days.
4. We collect the design with the help of glue for PVC.

Supreme aerobatics: Outdoor metal hanger

Create a truly beautiful metal hanger can, if you own the technique of cutting and welding of this material. However, there is a fairly simple way to make a designer hanger, combining metal elements with wooden.

To work, you will need a wooden boss of round-section and several copper plumbing accessories:

• 6 knees;
• 4 tees;
• 4 plugs.

Important condition: The input diameter of the timber must match the diameter of copper parts. A timber cut into pieces according to the drawing and tightly sit on it.

We were convinced that, if necessary, add a floor hanger to the midst of the house at all, not necessarily buy it. It is better to purchase materials and create a functional one with your own hands, but a unique thing.

Outdoor hanger with their own hands: video

One of the convenient ways of storing clothes is an outdoor hanger. It can be put at the entrance and leave here the upper clothes. Other models are more suitable for bedrooms, dressing rooms, children.

Types of floor hangers and place of their location

Some types of floor hangers are placed in certain premises. For example, hangers for outerwear put in the hallway near the door. It is convenient: you can immediately get rid of clothes. Outdoor hanger stand under the shoulders are more universal. Such products can be put in the corridor, in the dressing room, even in a nursery or bedroom. They host a large amount of clothing and they can be replaced by a wardrobe.

Standing hangers under suits, shirts and pants most often "registered" in bedrooms or children's (if a child is a schoolboy). It is there usually dress before going out of the house. There are also stool hangers. This is actually one of the options for costume hangers. Just legs and stops taken the shape of the seat.

What materials do

Outdoor hanger is most often made of metal or wood. Both of these material are durable, plastic, durable and relatively inexpensive. Some details are plugs, parts of hooks - can be made of plastic.

Most often you can see outdoor metal and wood hangers

Plastic inserts are more common on metal hangers with a lower cost. If not the elements of the supporting structure are made of plastic, it is not bad and such outdoor hangers can be bought without thinking. If the elements of the reference design are made of plastic, it is better to look for another model.

Metal hangers

The largest selection of outdoor metal hangers. Usually they are made of thin-walled pipes of round or square section. Metal is most often black coated with protective coating. It may be paint (most often - powder spraying), nickelting, chromium. In recent years, a new protective coating has appeared - plastic film (PVS). This is also a good option, since the film is impenetrable for moisture, air. For such products it is easy to care for, as the surface is smooth, without pores.

If the floor hanger will serve to accommodate heavy winter clothes, pay attention to the thickness of the metal when choosing. Minimum in this case - 1 mm. If in the description to the product The thickness of the pipe wall is not indicated, most likely the wall is very thin and is suitable for easy clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be sharpened from the array, and may be teams. The first option is significantly more expensive. The teams are 2-3 times cheaper, but not too different outwardly. The presence of joints in normal quality products are minorly noticeable, so with a limited budget it is quite possible to acquire products of economy class.

Wooden floor hangers are well polished, covered with protective coating. Usually use varnish or oil. Varnish creates a protective film on the surface so that it is easy to care for such products. Oils for the protective film tree do not create, but they are not worse. When processing oil, wood structure is clearly visible - all fibers, drawing.

Standing hangers for clothes in the hallway

Outdoor hangers for outerwear in the hallway most often are a rod, on which hooks for clothing of different lengths and shapes are placed on a different height. For stability, the design is equipped with a circular (rarely square) lean base. They can be made of wood or metal.

The height of the rack is full-150 cm and above, and the base is a circle with a diameter of 35-45 cm. For the hanger is stable, it is necessary to draw attention to the fact that the bottom part is weighted. And anyway, such structures require a careful relationship: hanging clothes need evenly. Otherwise, the hanger may fall.

There are outdoor hangers for the upper clothes of this type, but made differently. Several pipes or metal strips bend with a certain radius. In this case, the upper part has a smaller size than the lower one. This design is more stable, but requires more space that in a small hallway is not always possible.

Stands under the shoulders for clothes

A rack hanger for clothes on her shoulders is a comfortable thing if there is not enough space in the cabinets. They consist of the base of the rectangular shape, one or two pipes, for which the shoulders with clothes hang.

Rack hangers make metal and wood. Metal is made of pipes, there are forged. Some models of metal racks for clothing have an adjustable height. For long clothes, their rack can be raised higher. The maximum height is 150 cm. For short clothes, you can install at an altitude of 80-90 cm. This is a minimum height, and there is still intermediate positions.

In some cases, an outdoor hanger on wheels is useful. It is easy to move from place to place without removing the clothes youth. There are children's models of outdoor hangers of this type. They differ only in height and more "funny" colors. Still children's floor hangers can be made of plastic. Children's clothing weighs not so much, so plastic strength is more than enough. And the price of plastic floor hangers are the most inexpensive.

Folding models - access in case of reception

For those who take guests in large quantities, it is problematic to accommodate their upper clothes. For such cases, there is a foldable stand under the shoulders for the outerwear. In the folded state, it takes quite a bit of space and can be stored in the storage room.

Outdoor costume rack

The problem of storing a business suit is easily solved with the acquisition of a special floor hanger. She is something like racks, only with special puffers for a jacket and a trouser crossbar.

There are racks for a suit of wood, metal and plastic. Plastic in this case is not bad: the load is not foreseen, so that the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or box. It is convenient to store business little things: glasses, cufflinks, wallet, keys from the car, etc.

Put outdoor hangers for a suit usually in the bedroom, in the dressing room. It can be convenient to have a similar device in the office. There are different models, you can choose any interior style. And some options look like a designer decoration.

Hanger chair and hanger bedside table

There are rather unusual hanger models. They are combined with furniture objects. For example, there is a hanger chair. Models are different: with a suit for a suit, just a barbell under the shoulders or with a rack for outerwear. For small apartments, this is a very good option. Places takes as much as an ordinary chair or a banquette, and also serves for storing clothes.

Floor hanger with chair and bedside table - for the full use of the site of the hallway

Another option: bedside table. The lower part of such an outdoor hanger is much heavier than its upper half, so that it will not turn away from the pair of hanged coats. The second plus of such furniture is the optimal use of space. The trouble of all outdoor hangers is that the lower 50-60 cm remains unsuitable. In the case of a sleeping bedside table, this is not. This is another good way to rational use of space for small vessels.

Wall hanger in the hallway is a practical detail of the interior that can allow several tasks at once. It perfectly fits into any design, does not reduce the area of \u200b\u200bthe room and allows you to conveniently store clothes. The product is distinguished by a variety of variations. Manufacturers satisfy every taste of consumers and offer a huge variety of different models made from a variety of materials.

Hanger in the hallway
Metal hanger in the hallway
Hanger with wardrobe

Stylish and original ideas of wall hangers for an entrance hall

For premises in the classic style, a wooden or metal product with a concise decor is suitable. In modern models there is an opportunity to experiment with the form of a plank and a variety of hooks. Designers favorably emphasize the originality and relevance of the interior. Funny figures, peculiar designs, original shapes - the extraordinary furniture looks like, the more interesting the overall design of the hallway.

In Loft style you can use furniture with hooks like wrenches. For the hallways, High-tech is well suited for metal structures.

For the room in Scandinavian style and minimalism, you can choose any model, the main thing is that it has compact dimensions, and there was no excess decor.

Tree hanger
Hanger of wood massif with a mirror in the hallway room

Various wall-mounted hangers for an entrance hall

Save space in a close hallway will help wall hanger. The product can be made of chipboard sheets, metal, plastics or wood. The mounted hangers are conditionally divided into multi-tiered and hooks located in one line. The hanger can be equipped with an upper shelf and accessories compartments.

Wall furniture from chipboard is an inexpensive, concise model, supplemented with metal fittings.

Metal structures are characterized by a variety of models, thanks to which they harmoniously complement any interior.

Wood products are distinguished by grace and nobility. They will be superbly "fit" in the hallway, in which parquet or laminate is bed. Such products are well combined with furniture made of natural wood.

Hanger in the hallway
Red wood hanger

Wall hangers with a tab

The model with a bedside table is a good option for a small hallway, in which there is no possibility to install a bulk cabinet. In Tumba, you can store shoes and accessories. A lot of wall-mounted hangers are found on the market, which differ from each other fastening and price.

Wood hanger with zeokal
Thin tree hanger in the hallway

Types of hangers

1. The hanger is a holistic design in which the upper part and the cabinet are combined.
2. Wall hanger with a table, in which the cabinet is an independent element, and the hanger is a wrapping shield.
3. Hanger in the form of a closet without a door. In the lower and upper parts, lockers with the doors are mounted, and in the middle there is a hook panel. This option looks stylishly in the hallway and is characterized by a good room. Many models of such a plan are complemented by a mirror. The lower locker is the perfect place for storing shoes, and the upper - for the caps, hats.
4. Outdoor models. Here, the cabinet is support for the shield.

Tree hanger
Forged hanger in the hallway room

Advantages and disadvantages of wall hangers in the hallway

Many believe that the only advantage of wall hangers is the savings of the hallway space. But they have a lot of other advantages:

• low cost;
• the ability to withstand gravity;
• provide top clothes optimal storage mode (the product is well ventilated, quickly dries clothes under the rain);
• does not require special care;
• please give a variety of designer and engineering solutions.

The lack of wall-mounted models is only one: they do not differ in mobility. Therefore, it will not work radically change the design of the hallway. And if you want to remove the furniture, then you will have to make a cosmetic repair, as the walls of the walls will be corrupted by footprints.

Beautiful tree hanger in the hallway
Hanger in the hallway

How to choose a wall hanger to the hallway

First of all, when acquiring a wall hanger, be sure to check fasteners. It should be placed at least three places. Also inspect the product for defects.

An important role in the durability of the product is played by the brand and the country of the manufacturer. A sample of quality and style in the creation of furniture is Italy. The advantages of Italian products are in excellent quality and manual assembly. But you can look after the products and other manufacturers.

Types of hangers
Tree hanger

High quality also offer:

• Russia;
• Germany;
• Belarus.

When buying, you need to take into account functionality, capacity and convenience of construction. There are models with a fixed level of hooks, and it is impossible to lower them below, so consider the height, especially if people live in the house, children. Some models can be complemented by a mirror and shelves.

Hanger in the hallway
Hanger in the hallway

Wall hanger White in the hallway

White color symbolizes purity and kindness. It is white that combines all the colors in itself, so he gives the interior harmony and completion. A white hanger is suitable for a small room, as it visually expands the space.

Benefits of white furniture:

• reflection of light sources;
• visual increase in the room;
• white is always in fashion;
• well combined with various textures and flowers;
• harmoniously "fits" in the design of any room.

When buying white furniture, pay attention to the disadvantages. This color is quite impractical and brain, it requires careful care.

Wooden hanger
Hanger of wood massif to the hallway

Wrought iron products in the hallway

An forged hanger attaches a special style. It combines the sophistication of artistic lines and metal strength.

This model has many advantages:

• durability;
• stability;
• compactness.

Hanger in the hallway

Metal wall hanging

Metal products are distinguished by durability and versatility. Moreover, the hanger may be not suitable, now the market offers a rich assortment of various models. For example, in the form of an animal. There is also no color limit. They can be made of:

• gland;
• aluminum;
• become;
• copper and others.

When buying a hanger in the hallway, special attention should be paid to the strength of the material. So, for example, an aluminum hanger is not the most successful option, because the material is quite fragile. But you can stay in the following option: Aluminum panel, and hooks are made of more reliable and durable alloy (steel, iron, etc.).

Types of hangers
Wooden hanger in the hallway room

How to independently make a wall hanger

Alone to make a hanger bar is not difficult. The width and length of the plank is selected with your needs. A plate can be treated with varnish.

Depending on the length of the design in the wall, several holes are done. To get a slot in the same plane use the level. Dowels are placed in the hole, and to them, with the help of self-sufficiency, the basis is fastened. The fastener must necessarily be high quality, since it depends on the ability of the product to withstand the severity of the outerwear.

Soft hanger in the hallway room
Forged hanger in the hallway

Then the hooks are selected. Here you can include your fantasy, and do not buy ready, but to make them yourself. For example, from wrench. They are cleaned and polished, and then bend. They make two holes and screw to the plank. Wrench keys can be replaced with steel forks, snapshots, vehicles from wine, ordinary nails. It all depends only on your preferences, fantasies and the general decor of the room.

Hooks can be placed in a row or set them at different levels. For example, if you draw and cut out a chipboard of the chipboard, then the hooks are snags will play the role of branches. The bar may be not only rectangular. In the hallway it is fun to round the base, or a plank in the form of a cloud, a cunning pattern and so on.

Video: Simple hanger in the hallway do it yourself

50 photos of hanger ideas in the hallway room: